diff options
Diffstat (limited to 'collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh')
| -rw-r--r-- | collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh | 305 |
1 files changed, 0 insertions, 305 deletions
diff --git a/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh b/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh deleted file mode 100644 index da9cd19c3..000000000 --- a/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh +++ /dev/null @@ -1,305 +0,0 @@ -# shellcheck shell=bash -# no need for shebang - this file is loaded from charts.d.plugin -# SPDX-License-Identifier: GPL-3.0-or-later - -# netdata -# real-time performance and health monitoring, done right! -# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> -# - -apcupsd_ip= -apcupsd_port= - -declare -A apcupsd_sources=( - ["local"]="127.0.0.1:3551" -) - -# how frequently to collect UPS data -apcupsd_update_every=10 - -apcupsd_timeout=3 - -# the priority of apcupsd related to other charts -apcupsd_priority=90000 - -apcupsd_get() { - run -t $apcupsd_timeout apcaccess status "$1" -} - -is_ups_alive() { - local status - status="$(apcupsd_get "$1" | sed -e 's/STATUS.*: //' -e 't' -e 'd')" - case "$status" in - "" | "COMMLOST" | "SHUTTING DOWN") return 1 ;; - *) return 0 ;; - esac -} - -apcupsd_check() { - - # this should return: - # - 0 to enable the chart - # - 1 to disable the chart - - require_cmd apcaccess || return 1 - - # backwards compatibility - if [ "${apcupsd_ip}:${apcupsd_port}" != ":" ]; then - apcupsd_sources["local"]="${apcupsd_ip}:${apcupsd_port}" - fi - - local host working=0 failed=0 - for host in "${!apcupsd_sources[@]}"; do - apcupsd_get "${apcupsd_sources[${host}]}" >/dev/null - # shellcheck disable=2181 - if [ $? -ne 0 ]; then - error "cannot get information for apcupsd server ${host} on ${apcupsd_sources[${host}]}." - failed=$((failed + 1)) - else - if ! is_ups_alive ${apcupsd_sources[${host}]}; then - error "APC UPS ${host} on ${apcupsd_sources[${host}]} is not online." - failed=$((failed + 1)) - else - working=$((working + 1)) - fi - fi - done - - if [ ${working} -eq 0 ]; then - error "No APC UPSes found available." - return 1 - fi - - return 0 -} - -apcupsd_create() { - local host - for host in "${!apcupsd_sources[@]}"; do - # create the charts - cat <<EOF -CHART apcupsd_${host}.charge '' "UPS Charge" "percentage" ups apcupsd.charge area $((apcupsd_priority + 2)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION battery_charge charge absolute 1 100 - -CHART apcupsd_${host}.battery_voltage '' "UPS Battery Voltage" "Volts" ups apcupsd.battery.voltage line $((apcupsd_priority + 4)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION battery_voltage voltage absolute 1 100 -DIMENSION battery_voltage_nominal nominal absolute 1 100 - -CHART apcupsd_${host}.input_voltage '' "UPS Input Voltage" "Volts" input apcupsd.input.voltage line $((apcupsd_priority + 5)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION input_voltage voltage absolute 1 100 -DIMENSION input_voltage_min min absolute 1 100 -DIMENSION input_voltage_max max absolute 1 100 - -CHART apcupsd_${host}.input_frequency '' "UPS Input Frequency" "Hz" input apcupsd.input.frequency line $((apcupsd_priority + 6)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION input_frequency frequency absolute 1 100 - -CHART apcupsd_${host}.output_voltage '' "UPS Output Voltage" "Volts" output apcupsd.output.voltage line $((apcupsd_priority + 7)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION output_voltage voltage absolute 1 100 -DIMENSION output_voltage_nominal nominal absolute 1 100 - -CHART apcupsd_${host}.load '' "UPS Load" "percentage" ups apcupsd.load area $((apcupsd_priority)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION load load absolute 1 100 - -CHART apcupsd_${host}.load_usage '' "UPS Load Usage" "Watts" ups apcupsd.load_usage area $((apcupsd_priority + 1)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION load_usage load absolute 1 100 - -CHART apcupsd_${host}.temp '' "UPS Temperature" "Celsius" ups apcupsd.temperature line $((apcupsd_priority + 8)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION temp temp absolute 1 100 - -CHART apcupsd_${host}.time '' "UPS Time Remaining" "Minutes" ups apcupsd.time area $((apcupsd_priority + 3)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION time time absolute 1 100 - -CHART apcupsd_${host}.online '' "UPS ONLINE flag" "boolean" ups apcupsd.online line $((apcupsd_priority + 9)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION online online absolute 1 1 - -CHART apcupsd_${host}.selftest '' "UPS Self-Test status" "status" ups apcupsd.selftest line $((apcupsd_priority + 10)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION selftest_OK 'OK' absolute 1 1 -DIMENSION selftest_NO 'NO' absolute 1 1 -DIMENSION selftest_BT 'BT' absolute 1 1 -DIMENSION selftest_NG 'NG' absolute 1 1 - -CHART apcupsd_${host}.status '' "UPS Status" "status" ups apcupsd.status line $((apcupsd_priority + 11)) $apcupsd_update_every '' '' 'apcupsd' -DIMENSION status_ONLINE 'ONLINE' absolute 1 1 -DIMENSION status_ONBATT 'ONBATT' absolute 1 1 -DIMENSION status_OVERLOAD 'OVERLOAD' absolute 1 1 -DIMENSION status_LOWBATT 'LOWBATT' absolute 1 1 -DIMENSION status_REPLACEBATT 'REPLACEBATT' absolute 1 1 -DIMENSION status_NOBATT 'NOBATT' absolute 1 1 -DIMENSION status_SLAVE 'SLAVE' absolute 1 1 -DIMENSION status_SLAVEDOWN 'SLAVEDOWN' absolute 1 1 -DIMENSION status_COMMLOST 'COMMLOST' absolute 1 1 -DIMENSION status_CAL 'CAL' absolute 1 1 -DIMENSION status_TRIM 'TRIM' absolute 1 1 -DIMENSION status_BOOST 'BOOST' absolute 1 1 -DIMENSION status_SHUTTING_DOWN 'SHUTTING_DOWN' absolute 1 1 - -EOF - done - return 0 -} - -apcupsd_update() { - # the first argument to this function is the microseconds since last update - # pass this parameter to the BEGIN statement (see below). - - # do all the work to collect / calculate the values - # for each dimension - # remember: KEEP IT SIMPLE AND SHORT - - local host working=0 failed=0 - for host in "${!apcupsd_sources[@]}"; do - apcupsd_get "${apcupsd_sources[${host}]}" | awk " - -BEGIN { - battery_charge = 0; - battery_voltage = 0; - battery_voltage_nominal = 0; - input_voltage = 0; - input_voltage_min = 0; - input_voltage_max = 0; - input_frequency = 0; - output_voltage = 0; - output_voltage_nominal = 0; - load = 0; - temp = 0; - time = 0; - nompower = 0; - load_usage = 0; - selftest_OK = 0; - selftest_NO = 0; - selftest_BT = 0; - selftest_NG = 0; - status_ONLINE = 0; - status_CAL = 0; - status_TRIM = 0; - status_BOOST = 0; - status_ONBATT = 0; - status_OVERLOAD = 0; - status_LOWBATT = 0; - status_REPLACEBATT = 0; - status_NOBATT = 0; - status_SLAVE = 0; - status_SLAVEDOWN = 0; - status_COMMLOST = 0; - status_SHUTTING_DOWN = 0; - -} -/^BCHARGE.*/ { battery_charge = \$3 * 100 }; -/^BATTV.*/ { battery_voltage = \$3 * 100 }; -/^NOMBATTV.*/ { battery_voltage_nominal = \$3 * 100 }; -/^LINEV.*/ { input_voltage = \$3 * 100 }; -/^MINLINEV.*/ { input_voltage_min = \$3 * 100 }; -/^MAXLINEV.*/ { input_voltage_max = \$3 * 100 }; -/^LINEFREQ.*/ { input_frequency = \$3 * 100 }; -/^OUTPUTV.*/ { output_voltage = \$3 * 100 }; -/^NOMOUTV.*/ { output_voltage_nominal = \$3 * 100 }; -/^LOADPCT.*/ { load = \$3 * 100 }; -/^ITEMP.*/ { temp = \$3 * 100 }; -/^NOMPOWER.*/ { nompower = \$3 }; -/^TIMELEFT.*/ { time = \$3 * 100 }; -/^STATUS.*/ { online=(\$3 != \"COMMLOST\" && !(\$3 == \"SHUTTING\" && \$4 == \"DOWN\"))?1:0; }; -/^SELFTEST.*/ { selftest_OK = (\$3 == \"OK\") ? 1 : 0; - selftest_NO = (\$3 == \"NO\") ? 1 : 0; - selftest_BT = (\$3 == \"BT\") ? 1 : 0; - selftest_NG = (\$3 == \"NG\") ? 1 : 0; - }; -/^STATUS.*/ { status_ONLINE = (\$3 == \"ONLINE\") ? 1 : 0; - status_CAL = (\$3 == \"CAL\") ? 1 : 0; - status_TRIM = (\$3 == \"TRIM\") ? 1 : 0; - status_BOOST = (\$3 == \"BOOST\") ? 1 : 0; - status_ONBATT = (\$3 == \"ONBATT\") ? 1 : 0; - status_OVERLOAD = (\$3 == \"OVERLOAD\") ? 1 : 0; - status_LOWBATT = (\$3 == \"LOWBATT\") ? 1 : 0; - status_REPLACEBATT = (\$3 == \"REPLACEBATT\") ? 1 : 0; - status_NOBATT = (\$3 == \"NOBATT\") ? 1 : 0; - status_SLAVE = (\$3 == \"SLAVE\") ? 1 : 0; - status_SLAVEDOWN = (\$3 == \"SLAVEDOWN\") ? 1 : 0; - status_COMMLOST = (\$3 == \"COMMLOST\") ? 1 : 0; - status_SHUTTING_DOWN = (\$3 == \"SHUTTING\" && \$4 == \"DOWN\") ? 1 : 0; - }; - -END { - { load_usage = nompower * load / 100 }; - - print \"BEGIN apcupsd_${host}.online $1\"; - print \"SET online = \" online; - print \"END\" - - if (online == 1) { - print \"BEGIN apcupsd_${host}.charge $1\"; - print \"SET battery_charge = \" battery_charge; - print \"END\" - - print \"BEGIN apcupsd_${host}.battery_voltage $1\"; - print \"SET battery_voltage = \" battery_voltage; - print \"SET battery_voltage_nominal = \" battery_voltage_nominal; - print \"END\" - - print \"BEGIN apcupsd_${host}.input_voltage $1\"; - print \"SET input_voltage = \" input_voltage; - print \"SET input_voltage_min = \" input_voltage_min; - print \"SET input_voltage_max = \" input_voltage_max; - print \"END\" - - print \"BEGIN apcupsd_${host}.input_frequency $1\"; - print \"SET input_frequency = \" input_frequency; - print \"END\" - - print \"BEGIN apcupsd_${host}.output_voltage $1\"; - print \"SET output_voltage = \" output_voltage; - print \"SET output_voltage_nominal = \" output_voltage_nominal; - print \"END\" - - print \"BEGIN apcupsd_${host}.load $1\"; - print \"SET load = \" load; - print \"END\" - - print \"BEGIN apcupsd_${host}.load_usage $1\"; - print \"SET load_usage = \" load_usage; - print \"END\" - - print \"BEGIN apcupsd_${host}.temp $1\"; - print \"SET temp = \" temp; - print \"END\" - - print \"BEGIN apcupsd_${host}.time $1\"; - print \"SET time = \" time; - print \"END\" - - print \"BEGIN apcupsd_${host}.selftest $1\"; - print \"SET selftest_OK = \" selftest_OK; - print \"SET selftest_NO = \" selftest_NO; - print \"SET selftest_BT = \" selftest_BT; - print \"SET selftest_NG = \" selftest_NG; - print \"END\" - - print \"BEGIN apcupsd_${host}.status $1\"; - print \"SET status_ONLINE = \" status_ONLINE; - print \"SET status_ONBATT = \" status_ONBATT; - print \"SET status_OVERLOAD = \" status_OVERLOAD; - print \"SET status_LOWBATT = \" status_LOWBATT; - print \"SET status_REPLACEBATT = \" status_REPLACEBATT; - print \"SET status_NOBATT = \" status_NOBATT; - print \"SET status_SLAVE = \" status_SLAVE; - print \"SET status_SLAVEDOWN = \" status_SLAVEDOWN; - print \"SET status_COMMLOST = \" status_COMMLOST; - print \"SET status_CAL = \" status_CAL; - print \"SET status_TRIM = \" status_TRIM; - print \"SET status_BOOST = \" status_BOOST; - print \"SET status_SHUTTING_DOWN = \" status_SHUTTING_DOWN; - print \"END\"; - } -}" - # shellcheck disable=SC2181 - if [ $? -ne 0 ]; then - failed=$((failed + 1)) - error "failed to get values for APC UPS ${host} on ${apcupsd_sources[${host}]}" && return 1 - else - working=$((working + 1)) - fi - done - - [ $working -eq 0 ] && error "failed to get values from all APC UPSes" && return 1 - - return 0 -} |