diff options
Diffstat (limited to 'collectors/charts.d.plugin/libreswan/libreswan.chart.sh')
| -rw-r--r-- | collectors/charts.d.plugin/libreswan/libreswan.chart.sh | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/libreswan/libreswan.chart.sh b/collectors/charts.d.plugin/libreswan/libreswan.chart.sh new file mode 100644 index 000000000..6e29f8473 --- /dev/null +++ b/collectors/charts.d.plugin/libreswan/libreswan.chart.sh @@ -0,0 +1,176 @@ +# shellcheck shell=bash disable=SC1117 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +libreswan_update_every=1 + +# the priority is used to sort the charts on the dashboard +# 1 = the first chart +libreswan_priority=90000 + +# set to 1, to run ipsec with sudo +libreswan_sudo=1 + +# global variables to store our collected data + +# [TUNNELID] = TUNNELNAME +# here we track the *latest* established tunnels +# as detected by: ipsec whack --status +declare -A libreswan_connected_tunnels=() + +# [TUNNELID] = VALUE +# here we track values of all established tunnels (not only the latest) +# as detected by: ipsec whack --trafficstatus +declare -A libreswan_traffic_in=() +declare -A libreswan_traffic_out=() +declare -A libreswan_established_add_time=() + +# [TUNNELNAME] = CHARTID +# here we remember CHARTIDs of all tunnels +# we need this to avoid converting tunnel names to chart IDs on every iteration +declare -A libreswan_tunnel_charts=() + +# run the ipsec command +libreswan_ipsec() { + if [ ${libreswan_sudo} -ne 0 ] + then + sudo -n "${IPSEC_CMD}" "${@}" + return $? + else + "${IPSEC_CMD}" "${@}" + return $? + fi +} + +# fetch latest values - fill the arrays +libreswan_get() { + # do all the work to collect / calculate the values + # for each dimension + + # empty the variables + libreswan_traffic_in=() + libreswan_traffic_out=() + libreswan_established_add_time=() + libreswan_connected_tunnels=() + + # convert the ipsec command output to a shell script + # and source it to get the values + # shellcheck disable=SC1090 + source <( + { + libreswan_ipsec whack --status; + libreswan_ipsec whack --trafficstatus; + } | sed -n \ + -e "s|[0-9]\+ #\([0-9]\+\): \"\(.*\)\".*IPsec SA established.*newest IPSEC.*|libreswan_connected_tunnels[\"\1\"]=\"\2\"|p" \ + -e "s|[0-9]\+ #\([0-9]\+\): \"\(.*\)\",.* add_time=\([0-9]\+\),.* inBytes=\([0-9]\+\),.* outBytes=\([0-9]\+\).*|libreswan_traffic_in[\"\1\"]=\"\4\"; libreswan_traffic_out[\"\1\"]=\"\5\"; libreswan_established_add_time[\"\1\"]=\"\3\";|p" + ) || return 1 + + # check we got some data + [ ${#libreswan_connected_tunnels[@]} -eq 0 ] && return 1 + + return 0 +} + +# _check is called once, to find out if this chart should be enabled or not +libreswan_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + require_cmd ipsec || return 1 + + # make sure it is libreswan + # shellcheck disable=SC2143 + if [ -z "$(ipsec --version | grep -i libreswan)" ] + then + error "ipsec command is not Libreswan. Disabling Libreswan plugin." + return 1 + fi + + # check that we can collect data + libreswan_get || return 1 + + return 0 +} + +# create the charts for an ipsec tunnel +libreswan_create_one() { + local n="${1}" name + + name="${libreswan_connected_tunnels[${n}]}" + + [ ! -z "${libreswan_tunnel_charts[${name}]}" ] && return 0 + + libreswan_tunnel_charts[${name}]="$(fixid "${name}")" + + cat <<EOF +CHART libreswan.${libreswan_tunnel_charts[${name}]}_net '${name}_net' "LibreSWAN Tunnel ${name} Traffic" "kilobits/s" "${name}" libreswan.net area $((libreswan_priority)) $libreswan_update_every +DIMENSION in '' incremental 8 1000 +DIMENSION out '' incremental -8 1000 +CHART libreswan.${libreswan_tunnel_charts[${name}]}_uptime '${name}_uptime' "LibreSWAN Tunnel ${name} Uptime" "seconds" "${name}" libreswan.uptime line $((libreswan_priority + 1)) $libreswan_update_every +DIMENSION uptime '' absolute 1 1 +EOF + + return 0 + +} + +# _create is called once, to create the charts +libreswan_create() { + local n + for n in "${!libreswan_connected_tunnels[@]}" + do + libreswan_create_one "${n}" + done + return 0 +} + +libreswan_now=$(date +%s) + +# send the values to netdata for an ipsec tunnel +libreswan_update_one() { + local n="${1}" microseconds="${2}" name id uptime + + name="${libreswan_connected_tunnels[${n}]}" + id="${libreswan_tunnel_charts[${name}]}" + + [ -z "${id}" ] && libreswan_create_one "${name}" + + uptime=$(( libreswan_now - libreswan_established_add_time[${n}] )) + [ ${uptime} -lt 0 ] && uptime=0 + + # write the result of the work. + cat <<VALUESEOF +BEGIN libreswan.${id}_net ${microseconds} +SET in = ${libreswan_traffic_in[${n}]} +SET out = ${libreswan_traffic_out[${n}]} +END +BEGIN libreswan.${id}_uptime ${microseconds} +SET uptime = ${uptime} +END +VALUESEOF +} + +# _update is called continiously, to collect the values +libreswan_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + libreswan_get || return 1 + libreswan_now=$(date +%s) + + local n + for n in "${!libreswan_connected_tunnels[@]}" + do + libreswan_update_one "${n}" "${@}" + done + + return 0 +} |