2 files changed, 0 insertions, 1701 deletions
diff --git a/collectors/charts.d.plugin/Makefile.in b/collectors/charts.d.plugin/Makefile.in
deleted file mode 100644
index 0ef00d932..000000000
--- a/collectors/charts.d.plugin/Makefile.in
+++ /dev/null
@@ -1,1003 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = collectors/charts.d.plugin
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \
-	$(top_srcdir)/build/m4/ax_c__generic.m4 \
-	$(top_srcdir)/build/m4/ax_c_lto.m4 \
-	$(top_srcdir)/build/m4/ax_c_mallinfo.m4 \
-	$(top_srcdir)/build/m4/ax_c_mallopt.m4 \
-	$(top_srcdir)/build/m4/ax_check_compile_flag.m4 \
-	$(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \
-	$(top_srcdir)/build/m4/ax_pthread.m4 \
-	$(top_srcdir)/build/m4/jemalloc.m4 \
-	$(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(dist_charts_SCRIPTS) \
-	$(dist_plugins_SCRIPTS) $(dist_charts_DATA) \
-	$(dist_chartsconfig_DATA) $(dist_libconfig_DATA) \
-	$(dist_noinst_DATA) $(dist_userchartsconfig_DATA) \
-	$(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" \
-	"$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" \
-	"$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)"
-SCRIPTS = $(dist_charts_SCRIPTS) $(dist_plugins_SCRIPTS)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-DATA = $(dist_charts_DATA) $(dist_chartsconfig_DATA) \
-	$(dist_libconfig_DATA) $(dist_noinst_DATA) \
-	$(dist_userchartsconfig_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/ap/Makefile.inc \
-	$(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc \
-	$(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc \
-	$(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc \
-	$(srcdir)/hddtemp/Makefile.inc \
-	$(srcdir)/libreswan/Makefile.inc \
-	$(srcdir)/load_average/Makefile.inc \
-	$(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc \
-	$(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc \
-	$(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc \
-	$(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc \
-	$(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc \
-	$(top_srcdir)/build/subst.inc
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CUPSCONFIG = @CUPSCONFIG@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CXX_BINARY = @CXX_BINARY@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@
-IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@
-JSON_CFLAGS = @JSON_CFLAGS@
-JSON_LIBS = @JSON_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBCAP_CFLAGS = @LIBCAP_CFLAGS@
-LIBCAP_LIBS = @LIBCAP_LIBS@
-LIBCRYPTO_CFLAGS = @LIBCRYPTO_CFLAGS@
-LIBCRYPTO_LIBS = @LIBCRYPTO_LIBS@
-LIBCURL_CFLAGS = @LIBCURL_CFLAGS@
-LIBCURL_LIBS = @LIBCURL_LIBS@
-LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
-LIBMNL_LIBS = @LIBMNL_LIBS@
-LIBMONGOC_CFLAGS = @LIBMONGOC_CFLAGS@
-LIBMONGOC_LIBS = @LIBMONGOC_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBSSL_CFLAGS = @LIBSSL_CFLAGS@
-LIBSSL_LIBS = @LIBSSL_LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MATH_CFLAGS = @MATH_CFLAGS@
-MATH_LIBS = @MATH_LIBS@
-MKDIR_P = @MKDIR_P@
-NFACCT_CFLAGS = @NFACCT_CFLAGS@
-NFACCT_LIBS = @NFACCT_LIBS@
-OBJEXT = @OBJEXT@
-OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@
-OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@
-OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@
-OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@
-OPTIONAL_JSONC_LIBS = @OPTIONAL_JSONC_LIBS@
-OPTIONAL_JUDY_LIBS = @OPTIONAL_JUDY_LIBS@
-OPTIONAL_KINESIS_CFLAGS = @OPTIONAL_KINESIS_CFLAGS@
-OPTIONAL_KINESIS_LIBS = @OPTIONAL_KINESIS_LIBS@
-OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@
-OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@
-OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@
-OPTIONAL_MATH_CFLAGS = @OPTIONAL_MATH_CFLAGS@
-OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@
-OPTIONAL_MONGOC_CFLAGS = @OPTIONAL_MONGOC_CFLAGS@
-OPTIONAL_MONGOC_LIBS = @OPTIONAL_MONGOC_LIBS@
-OPTIONAL_NFACCT_CFLAGS = @OPTIONAL_NFACCT_CFLAGS@
-OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@
-OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS@
-OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS@
-OPTIONAL_SSL_LIBS = @OPTIONAL_SSL_LIBS@
-OPTIONAL_UUID_CFLAGS = @OPTIONAL_UUID_CFLAGS@
-OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@
-OPTIONAL_UV_LIBS = @OPTIONAL_UV_LIBS@
-OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@
-OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@
-OPTIONAL_ZLIB_CFLAGS = @OPTIONAL_ZLIB_CFLAGS@
-OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-PROTOBUF_CFLAGS = @PROTOBUF_CFLAGS@
-PROTOBUF_LIBS = @PROTOBUF_LIBS@
-PROTOC = @PROTOC@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SSE_CANDIDATE = @SSE_CANDIDATE@
-STRIP = @STRIP@
-UUID_CFLAGS = @UUID_CFLAGS@
-UUID_LIBS = @UUID_LIBS@
-VERSION = @VERSION@
-XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@
-XENLIGHT_LIBS = @XENLIGHT_LIBS@
-YAJL_CFLAGS = @YAJL_CFLAGS@
-YAJL_LIBS = @YAJL_LIBS@
-ZLIB_CFLAGS = @ZLIB_CFLAGS@
-ZLIB_LIBS = @ZLIB_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-ax_pthread_config = @ax_pthread_config@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_target = @build_target@
-build_vendor = @build_vendor@
-builddir = @builddir@
-cachedir = @cachedir@
-chartsdir = @chartsdir@
-configdir = @configdir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-has_jemalloc = @has_jemalloc@
-has_tcmalloc = @has_tcmalloc@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libconfigdir = @libconfigdir@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-logdir = @logdir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-nodedir = @nodedir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pluginsdir = @pluginsdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pythondir = @pythondir@
-registrydir = @registrydir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-varlibdir = @varlibdir@
-webdir = @webdir@
-MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
-CLEANFILES = \
-    charts.d.plugin \
-    $(NULL)
-
-SUFFIXES = .in
-dist_libconfig_DATA = \
-    charts.d.conf \
-    $(NULL)
-
-dist_plugins_SCRIPTS = \
-    charts.d.dryrun-helper.sh \
-    charts.d.plugin \
-    loopsleepms.sh.inc \
-    $(NULL)
-
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-
-# do not install these files, but include them in the distribution
-dist_noinst_DATA = charts.d.plugin.in README.md $(NULL) ap/README.md \
-	ap/Makefile.inc apache/README.md apache/Makefile.inc \
-	apcupsd/README.md apcupsd/Makefile.inc cpu_apps/README.md \
-	cpu_apps/Makefile.inc cpufreq/README.md cpufreq/Makefile.inc \
-	example/README.md example/Makefile.inc exim/README.md \
-	exim/Makefile.inc hddtemp/README.md hddtemp/Makefile.inc \
-	libreswan/README.md libreswan/Makefile.inc \
-	load_average/README.md load_average/Makefile.inc \
-	mem_apps/README.md mem_apps/Makefile.inc mysql/README.md \
-	mysql/Makefile.inc nginx/README.md nginx/Makefile.inc \
-	nut/README.md nut/Makefile.inc opensips/README.md \
-	opensips/Makefile.inc phpfpm/README.md phpfpm/Makefile.inc \
-	postfix/README.md postfix/Makefile.inc sensors/README.md \
-	sensors/Makefile.inc squid/README.md squid/Makefile.inc \
-	tomcat/README.md tomcat/Makefile.inc
-dist_charts_SCRIPTS = \
-    $(NULL)
-
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-dist_charts_DATA = $(NULL) ap/ap.chart.sh apache/apache.chart.sh \
-	apcupsd/apcupsd.chart.sh cpu_apps/cpu_apps.chart.sh \
-	cpufreq/cpufreq.chart.sh example/example.chart.sh \
-	exim/exim.chart.sh hddtemp/hddtemp.chart.sh \
-	libreswan/libreswan.chart.sh \
-	load_average/load_average.chart.sh mem_apps/mem_apps.chart.sh \
-	mysql/mysql.chart.sh nginx/nginx.chart.sh nut/nut.chart.sh \
-	opensips/opensips.chart.sh phpfpm/phpfpm.chart.sh \
-	postfix/postfix.chart.sh sensors/sensors.chart.sh \
-	squid/squid.chart.sh tomcat/tomcat.chart.sh
-userchartsconfigdir = $(configdir)/charts.d
-dist_userchartsconfig_DATA = \
-    .keep \
-    $(NULL)
-
-chartsconfigdir = $(libconfigdir)/charts.d
-dist_chartsconfig_DATA = $(NULL) ap/ap.conf apache/apache.conf \
-	apcupsd/apcupsd.conf cpu_apps/cpu_apps.conf \
-	cpufreq/cpufreq.conf example/example.conf exim/exim.conf \
-	hddtemp/hddtemp.conf libreswan/libreswan.conf \
-	load_average/load_average.conf mem_apps/mem_apps.conf \
-	mysql/mysql.conf nginx/nginx.conf nut/nut.conf \
-	opensips/opensips.conf phpfpm/phpfpm.conf postfix/postfix.conf \
-	sensors/sensors.conf squid/squid.conf tomcat/tomcat.conf
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .in
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_chartsSCRIPTS: $(dist_charts_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n' \
-	    -e 'h;s|.*|.|' \
-	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
-	      if (++n[d] == $(am__install_max)) { \
-		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
-	    else { print "f", d "/" $$4, $$1 } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	     test -z "$$files" || { \
-	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(chartsdir)$$dir'"; \
-	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(chartsdir)$$dir" || exit $$?; \
-	     } \
-	; done
-
-uninstall-dist_chartsSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || exit 0; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	       sed -e 's,.*/,,;$(transform)'`; \
-	dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir)
-install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n' \
-	    -e 'h;s|.*|.|' \
-	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
-	      if (++n[d] == $(am__install_max)) { \
-		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
-	    else { print "f", d "/" $$4, $$1 } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	     test -z "$$files" || { \
-	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \
-	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \
-	     } \
-	; done
-
-uninstall-dist_pluginsSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	       sed -e 's,.*/,,;$(transform)'`; \
-	dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir)
-install-dist_chartsDATA: $(dist_charts_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsdir)" || exit $$?; \
-	done
-
-uninstall-dist_chartsDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir)
-install-dist_chartsconfigDATA: $(dist_chartsconfig_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(chartsconfigdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(chartsconfigdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsconfigdir)" || exit $$?; \
-	done
-
-uninstall-dist_chartsconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(chartsconfigdir)'; $(am__uninstall_files_from_dir)
-install-dist_libconfigDATA: $(dist_libconfig_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \
-	done
-
-uninstall-dist_libconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir)
-install-dist_userchartsconfigDATA: $(dist_userchartsconfig_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(userchartsconfigdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(userchartsconfigdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userchartsconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(userchartsconfigdir)" || exit $$?; \
-	done
-
-uninstall-dist_userchartsconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(userchartsconfigdir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_chartsDATA install-dist_chartsSCRIPTS \
-	install-dist_chartsconfigDATA install-dist_libconfigDATA \
-	install-dist_pluginsSCRIPTS install-dist_userchartsconfigDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \
-	uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \
-	uninstall-dist_pluginsSCRIPTS \
-	uninstall-dist_userchartsconfigDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dist_chartsDATA \
-	install-dist_chartsSCRIPTS install-dist_chartsconfigDATA \
-	install-dist_libconfigDATA install-dist_pluginsSCRIPTS \
-	install-dist_userchartsconfigDATA install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \
-	uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \
-	uninstall-dist_pluginsSCRIPTS \
-	uninstall-dist_userchartsconfigDATA
-
-.PRECIOUS: Makefile
-
-.in:
-	if sed \
-		-e 's#[@]localstatedir_POST@#$(localstatedir)#g' \
-		-e 's#[@]sbindir_POST@#$(sbindir)#g' \
-		-e 's#[@]pluginsdir_POST@#$(pluginsdir)#g' \
-		-e 's#[@]configdir_POST@#$(configdir)#g' \
-		-e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \
-		-e 's#[@]cachedir_POST@#$(cachedir)#g' \
-		-e 's#[@]registrydir_POST@#$(registrydir)#g' \
-		-e 's#[@]varlibdir_POST@#$(varlibdir)#g' \
-		$< > $@.tmp; then \
-		mv "$@.tmp" "$@"; \
-	else \
-		rm -f "$@.tmp"; \
-		false; \
-	fi
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/collectors/charts.d.plugin/charts.d.plugin b/collectors/charts.d.plugin/charts.d.plugin
deleted file mode 100644
index 40dc48c15..000000000
--- a/collectors/charts.d.plugin/charts.d.plugin
+++ /dev/null
@@ -1,698 +0,0 @@
-#!/usr/bin/env bash
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# netdata
-# real-time performance and health monitoring, done right!
-# (C) 2017 Costa Tsaousis <costa@tsaousis.gr>
-# GPL v3+
-#
-# charts.d.plugin allows easy development of BASH plugins
-#
-# if you need to run parallel charts.d processes, link this file to a different name
-# in the same directory, with a .plugin suffix and netdata will start both of them,
-# each will have a different config file and modules configuration directory.
-#
-
-export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin"
-
-PROGRAM_FILE="$0"
-PROGRAM_NAME="$(basename $0)"
-PROGRAM_NAME="${PROGRAM_NAME/.plugin/}"
-MODULE_NAME="main"
-
-# -----------------------------------------------------------------------------
-# create temp dir
-
-debug=0
-TMP_DIR=
-chartsd_cleanup() {
-	trap '' EXIT QUIT HUP INT TERM
-
-	if [ ! -z "$TMP_DIR" -a -d "$TMP_DIR" ]; then
-		[ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: cleaning up temporary directory $TMP_DIR ..."
-		rm -rf "$TMP_DIR"
-	fi
-	exit 0
-}
-trap chartsd_cleanup EXIT QUIT HUP INT TERM
-
-if [ $UID = "0" ]; then
-	TMP_DIR="$(mktemp -d /var/run/netdata-${PROGRAM_NAME}-XXXXXXXXXX)"
-else
-	TMP_DIR="$(mktemp -d /tmp/.netdata-${PROGRAM_NAME}-XXXXXXXXXX)"
-fi
-
-logdate() {
-	date "+%Y-%m-%d %H:%M:%S"
-}
-
-log() {
-	local status="${1}"
-	shift
-
-	echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: ${*}"
-
-}
-
-warning() {
-	log WARNING "${@}"
-}
-
-error() {
-	log ERROR "${@}"
-}
-
-info() {
-	log INFO "${@}"
-}
-
-fatal() {
-	log FATAL "${@}"
-	echo "DISABLE"
-	exit 1
-}
-
-debug() {
-	[ $debug -eq 1 ] && log DEBUG "${@}"
-}
-
-# -----------------------------------------------------------------------------
-# check a few commands
-
-require_cmd() {
-	local x=$(which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null)
-	if [ -z "${x}" -o ! -x "${x}" ]; then
-		warning "command '${1}' is not found in ${PATH}."
-		eval "${1^^}_CMD=\"\""
-		return 1
-	fi
-
-	eval "${1^^}_CMD=\"${x}\""
-	return 0
-}
-
-require_cmd date || exit 1
-require_cmd sed || exit 1
-require_cmd basename || exit 1
-require_cmd dirname || exit 1
-require_cmd cat || exit 1
-require_cmd grep || exit 1
-require_cmd egrep || exit 1
-require_cmd mktemp || exit 1
-require_cmd awk || exit 1
-require_cmd timeout || exit 1
-require_cmd curl || exit 1
-
-# -----------------------------------------------------------------------------
-
-[ $((BASH_VERSINFO[0])) -lt 4 ] && fatal "BASH version 4 or later is required, but found version: ${BASH_VERSION}. Please upgrade."
-
-info "started from '$PROGRAM_FILE' with options: $*"
-
-# -----------------------------------------------------------------------------
-# internal defaults
-# netdata exposes a few environment variables for us
-
-[ -z "${NETDATA_PLUGINS_DIR}" ] && NETDATA_PLUGINS_DIR="$(dirname "${0}")"
-[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="/etc/netdata"
-[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="/usr/lib/netdata/conf.d"
-
-pluginsd="${NETDATA_PLUGINS_DIR}"
-stockconfd="${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}"
-userconfd="${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}"
-olduserconfd="${NETDATA_USER_CONFIG_DIR}"
-chartsd="$pluginsd/../charts.d"
-
-minimum_update_frequency="${NETDATA_UPDATE_EVERY-1}"
-update_every=${minimum_update_frequency} # this will be overwritten by the command line
-
-# work around for non BASH shells
-charts_create="_create"
-charts_update="_update"
-charts_check="_check"
-charts_undescore="_"
-
-# when making iterations, charts.d can loop more frequently
-# to prevent plugins missing iterations.
-# this is a percentage relative to update_every to align its
-# iterations.
-# The minimum is 10%, the maximum 100%.
-# So, if update_every is 1 second and time_divisor is 50,
-# charts.d will iterate every 500ms.
-# Charts will be called to collect data only if the time
-# passed since the last time the collected data is equal or
-# above their update_every.
-time_divisor=50
-
-# number of seconds to run without restart
-# after this time, charts.d.plugin will exit
-# netdata will restart it
-restart_timeout=$((3600 * 4))
-
-# check if the charts.d plugins are using global variables
-# they should not.
-# It does not currently support BASH v4 arrays, so it is
-# disabled
-dryrunner=0
-
-# check for timeout command
-check_for_timeout=1
-
-# the default enable/disable value for all charts
-enable_all_charts="yes"
-
-# -----------------------------------------------------------------------------
-# parse parameters
-
-check=0
-chart_only=
-while [ ! -z "$1" ]; do
-	if [ "$1" = "check" ]; then
-		check=1
-		shift
-		continue
-	fi
-
-	if [ "$1" = "debug" -o "$1" = "all" ]; then
-		debug=1
-		shift
-		continue
-	fi
-
-	if [ -f "$chartsd/$1.chart.sh" ]; then
-		debug=1
-		chart_only="$(echo $1.chart.sh | sed "s/\.chart\.sh$//g")"
-		shift
-		continue
-	fi
-
-	if [ -f "$chartsd/$1" ]; then
-		debug=1
-		chart_only="$(echo $1 | sed "s/\.chart\.sh$//g")"
-		shift
-		continue
-	fi
-
-	# number check
-	n="$1"
-	x=$((n))
-	if [ "$x" = "$n" ]; then
-		shift
-		update_every=$x
-		[ $update_every -lt $minimum_update_frequency ] && update_every=$minimum_update_frequency
-		continue
-	fi
-
-	fatal "Cannot understand parameter $1. Aborting."
-done
-
-# -----------------------------------------------------------------------------
-# loop control
-
-# default sleep function
-LOOPSLEEPMS_HIGHRES=0
-now_ms=
-current_time_ms_default() {
-	now_ms="$(date +'%s')000"
-}
-current_time_ms="current_time_ms_default"
-current_time_ms_accuracy=1
-mysleep="sleep"
-
-# if found and included, this file overwrites loopsleepms()
-# and current_time_ms() with a high resolution timer function
-# for precise looping.
-source "$pluginsd/loopsleepms.sh.inc"
-[ $? -ne 0 ] && error "Failed to load '$pluginsd/loopsleepms.sh.inc'."
-
-# -----------------------------------------------------------------------------
-# load my configuration
-
-for myconfig in "${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}.conf" "${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf"; do
-	if [ -f "$myconfig" ]; then
-		source "$myconfig"
-		if [ $? -ne 0 ]; then
-			error "Config file '$myconfig' loaded with errors."
-		else
-			info "Configuration file '$myconfig' loaded."
-		fi
-	else
-		warning "Configuration file '$myconfig' not found."
-	fi
-done
-
-# make sure time_divisor is right
-time_divisor=$((time_divisor))
-[ $time_divisor -lt 10 ] && time_divisor=10
-[ $time_divisor -gt 100 ] && time_divisor=100
-
-# we check for the timeout command, after we load our
-# configuration, so that the user may overwrite the
-# timeout command we use, providing a function that
-# can emulate the timeout command we need:
-# > timeout SECONDS command ...
-if [ $check_for_timeout -eq 1 ]; then
-	require_cmd timeout || exit 1
-fi
-
-# -----------------------------------------------------------------------------
-# internal checks
-
-# netdata passes the requested update frequency as the first argument
-update_every=$((update_every + 1 - 1))     # makes sure it is a number
-test $update_every -eq 0 && update_every=1 # if it is zero, make it 1
-
-# check the charts.d directory
-[ ! -d "$chartsd" ] && fatal "cannot find charts directory '$chartsd'"
-
-# -----------------------------------------------------------------------------
-# library functions
-
-fixid() {
-	echo "$*" |
-		tr -c "[A-Z][a-z][0-9]" "_" |
-		sed -e "s|^_\+||g" -e "s|_\+$||g" -e "s|_\+|_|g" |
-		tr "[A-Z]" "[a-z]"
-}
-
-run() {
-	local ret pid="${BASHPID}" t
-
-	if [ "z${1}" = "z-t" -a "${2}" != "0" ]; then
-		t="${2}"
-		shift 2
-		case "${NETDATA_SYSTEM_OS_ID}" in
-		"alpine")
-			timeout -t ${t} "${@}" 2>"${TMP_DIR}/run.${pid}"
-			;;
-		*)
-			timeout ${t} "${@}" 2>"${TMP_DIR}/run.${pid}"
-			;;
-		esac
-		ret=$?
-	else
-		"${@}" 2>"${TMP_DIR}/run.${pid}"
-		ret=$?
-	fi
-
-	if [ ${ret} -ne 0 ]; then
-		{
-			printf "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: command '"
-			printf "%q " "${@}"
-			printf "' failed with code ${ret}:\n --- BEGIN TRACE ---\n"
-			cat "${TMP_DIR}/run.${pid}"
-			printf " --- END TRACE ---\n"
-		} >&2
-	fi
-	rm -f "${TMP_DIR}/run.${pid}"
-
-	return ${ret}
-}
-
-# convert any floating point number
-# to integer, give a multiplier
-# the result is stored in ${FLOAT2INT_RESULT}
-# so that no fork is necessary
-# the multiplier must be a power of 10
-float2int() {
-	local f m="$2" a b l v=($1)
-	f=${v[0]}
-
-	# the length of the multiplier - 1
-	l=$((${#m} - 1))
-
-	# check if the number is in scientific notation
-	if [[ ${f} =~ ^[[:space:]]*(-)?[0-9.]+(e|E)(\+|-)[0-9]+ ]]; then
-		# convert it to decimal
-		# unfortunately, this fork cannot be avoided
-		# if you know of a way to avoid it, please let me know
-		f=$(printf "%0.${l}f" ${f})
-	fi
-
-	# split the floating point number
-	# in integer (a) and decimal (b)
-	a=${f/.*/}
-	b=${f/*./}
-
-	# if the integer part is missing
-	# set it to zero
-	[ -z "${a}" ] && a="0"
-
-	# strip leading zeros from the integer part
-	# base 10 convertion
-	a=$((10#$a))
-
-	# check the length of the decimal part
-	# against the length of the multiplier
-	if [ ${#b} -gt ${l} ]; then
-		# too many digits - take the most significant
-		b=${b:0:l}
-
-	elif [ ${#b} -lt ${l} ]; then
-		# too few digits - pad with zero on the right
-		local z="00000000000000000000000" r=$((l - ${#b}))
-		b="${b}${z:0:r}"
-	fi
-
-	# strip leading zeros from the decimal part
-	# base 10 convertion
-	b=$((10#$b))
-
-	# store the result
-	FLOAT2INT_RESULT=$(((a * m) + b))
-}
-
-# -----------------------------------------------------------------------------
-# charts check functions
-
-all_charts() {
-	cd "$chartsd"
-	[ $? -ne 0 ] && error "cannot cd to $chartsd" && return 1
-
-	ls *.chart.sh | sed "s/\.chart\.sh$//g"
-}
-
-declare -A charts_enable_keyword=(
-	['apache']="force"
-	['cpu_apps']="force"
-	['cpufreq']="force"
-	['example']="force"
-	['exim']="force"
-	['hddtemp']="force"
-	['load_average']="force"
-	['mem_apps']="force"
-	['mysql']="force"
-	['nginx']="force"
-	['phpfpm']="force"
-	['postfix']="force"
-	['sensors']="force"
-	['squid']="force"
-	['tomcat']="force"
-)
-
-all_enabled_charts() {
-	local charts= enabled= required=
-
-	# find all enabled charts
-
-	for chart in $(all_charts); do
-		MODULE_NAME="${chart}"
-
-		eval "enabled=\$$chart"
-		if [ -z "${enabled}" ]; then
-			enabled="${enable_all_charts}"
-		fi
-
-		required="${charts_enable_keyword[${chart}]}"
-		[ -z "${required}" ] && required="yes"
-
-		if [ ! "${enabled}" = "${required}" ]; then
-			info "is disabled. Add a line with $chart=$required in '${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf' to enable it (or remove the line that disables it)."
-		else
-			debug "is enabled for auto-detection."
-			local charts="$charts $chart"
-		fi
-	done
-	MODULE_NAME="main"
-
-	local charts2=
-	for chart in $charts; do
-		MODULE_NAME="${chart}"
-
-		# check the enabled charts
-		local check="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_check()")"
-		if [ -z "$check" ]; then
-			error "module '$chart' does not seem to have a $chart$charts_check() function. Disabling it."
-			continue
-		fi
-
-		local create="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_create()")"
-		if [ -z "$create" ]; then
-			error "module '$chart' does not seem to have a $chart$charts_create() function. Disabling it."
-			continue
-		fi
-
-		local update="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_update()")"
-		if [ -z "$update" ]; then
-			error "module '$chart' does not seem to have a $chart$charts_update() function. Disabling it."
-			continue
-		fi
-
-		# check its config
-		#if [ -f "$userconfd/$chart.conf" ]
-		#then
-		#   if [ ! -z "$( cat "$userconfd/$chart.conf" | sed "s/^ \+//g" | grep -v "^$" | grep -v "^#" | grep -v "^$chart$charts_undescore" )" ]
-		#   then
-		#       error "module's $chart config $userconfd/$chart.conf should only have lines starting with $chart$charts_undescore . Disabling it."
-		#       continue
-		#   fi
-		#fi
-
-		#if [ $dryrunner -eq 1 ]
-		#   then
-		#   "$pluginsd/charts.d.dryrun-helper.sh" "$chart" "$chartsd/$chart.chart.sh" "$userconfd/$chart.conf" >/dev/null
-		#   if [ $? -ne 0 ]
-		#   then
-		#       error "module's $chart did not pass the dry run check. This means it uses global variables not starting with $chart. Disabling it."
-		#       continue
-		#   fi
-		#fi
-
-		local charts2="$charts2 $chart"
-	done
-	MODULE_NAME="main"
-
-	echo $charts2
-	debug "enabled charts: $charts2"
-}
-
-# -----------------------------------------------------------------------------
-# load the charts
-
-suffix_retries="_retries"
-suffix_update_every="_update_every"
-active_charts=
-for chart in $(all_enabled_charts); do
-	MODULE_NAME="${chart}"
-
-	debug "loading module: '$chartsd/$chart.chart.sh'"
-
-	source "$chartsd/$chart.chart.sh"
-	[ $? -ne 0 ] && warning "Module '$chartsd/$chart.chart.sh' loaded with errors."
-
-	# first load the stock config
-	if [ -f "$stockconfd/$chart.conf" ]; then
-		debug "loading module configuration: '$stockconfd/$chart.conf'"
-		source "$stockconfd/$chart.conf"
-		[ $? -ne 0 ] && warning "Config file '$stockconfd/$chart.conf' loaded with errors."
-	else
-		debug "not found module configuration: '$stockconfd/$chart.conf'"
-	fi
-
-	# then load the user config (it overwrites the stock)
-	if [ -f "$userconfd/$chart.conf" ]; then
-		debug "loading module configuration: '$userconfd/$chart.conf'"
-		source "$userconfd/$chart.conf"
-		[ $? -ne 0 ] && warning "Config file '$userconfd/$chart.conf' loaded with errors."
-	else
-		debug "not found module configuration: '$userconfd/$chart.conf'"
-
-		if [ -f "$olduserconfd/$chart.conf" ]; then
-			# support for very old netdata that had the charts.d module configs in /etc/netdata
-			info "loading module configuration from obsolete location: '$olduserconfd/$chart.conf'"
-			source "$olduserconfd/$chart.conf"
-			[ $? -ne 0 ] && warning "Config file '$olduserconfd/$chart.conf' loaded with errors."
-		fi
-	fi
-
-	eval "dt=\$$chart$suffix_update_every"
-	dt=$((dt + 1 - 1)) # make sure it is a number
-	if [ $dt -lt $update_every ]; then
-		eval "$chart$suffix_update_every=$update_every"
-	fi
-
-	$chart$charts_check
-	if [ $? -eq 0 ]; then
-		debug "module '$chart' activated"
-		active_charts="$active_charts $chart"
-	else
-		error "module's '$chart' check() function reports failure."
-	fi
-done
-MODULE_NAME="main"
-debug "activated modules: $active_charts"
-
-# -----------------------------------------------------------------------------
-# check overwrites
-
-# enable work time reporting
-debug_time=
-test $debug -eq 1 && debug_time=tellwork
-
-# if we only need a specific chart, remove all the others
-if [ ! -z "${chart_only}" ]; then
-	debug "requested to run only for: '${chart_only}'"
-	check_charts=
-	for chart in $active_charts; do
-		if [ "$chart" = "$chart_only" ]; then
-			check_charts="$chart"
-			break
-		fi
-	done
-	active_charts="$check_charts"
-fi
-debug "activated charts: $active_charts"
-
-# stop if we just need a pre-check
-if [ $check -eq 1 ]; then
-	info "CHECK RESULT"
-	info "Will run the charts: $active_charts"
-	exit 0
-fi
-
-# -----------------------------------------------------------------------------
-
-cd "${TMP_DIR}" || exit 1
-
-# -----------------------------------------------------------------------------
-# create charts
-
-run_charts=
-for chart in $active_charts; do
-	MODULE_NAME="${chart}"
-
-	debug "calling '$chart$charts_create()'..."
-	$chart$charts_create
-	if [ $? -eq 0 ]; then
-		run_charts="$run_charts $chart"
-		debug "'$chart' initialized."
-	else
-		error "module's '$chart' function '$chart$charts_create()' reports failure."
-	fi
-done
-MODULE_NAME="main"
-debug "run_charts='$run_charts'"
-
-# -----------------------------------------------------------------------------
-# update dimensions
-
-[ -z "$run_charts" ] && fatal "No charts to collect data from."
-
-declare -A charts_last_update=() charts_update_every=() charts_retries=() charts_next_update=() charts_run_counter=() charts_serial_failures=()
-global_update() {
-	local exit_at \
-		c=0 dt ret last_ms exec_start_ms exec_end_ms \
-		chart now_charts=() next_charts=($run_charts) \
-		next_ms x seconds millis
-
-	# return the current time in ms in $now_ms
-	${current_time_ms}
-
-	exit_at=$((now_ms + (restart_timeout * 1000)))
-
-	for chart in $run_charts; do
-		eval "charts_update_every[$chart]=\$$chart$suffix_update_every"
-		test -z "${charts_update_every[$chart]}" && charts_update_every[$chart]=$update_every
-
-		eval "charts_retries[$chart]=\$$chart$suffix_retries"
-		test -z "${charts_retries[$chart]}" && charts_retries[$chart]=10
-
-		charts_last_update[$chart]=$((now_ms - (now_ms % (charts_update_every[$chart] * 1000))))
-		charts_next_update[$chart]=$((charts_last_update[$chart] + (charts_update_every[$chart] * 1000)))
-		charts_run_counter[$chart]=0
-		charts_serial_failures[$chart]=0
-
-		echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}"
-		echo "DIMENSION run_time 'run time' absolute 1 1"
-	done
-
-	# the main loop
-	while [ "${#next_charts[@]}" -gt 0 ]; do
-		c=$((c + 1))
-		now_charts=("${next_charts[@]}")
-		next_charts=()
-
-		# return the current time in ms in $now_ms
-		${current_time_ms}
-
-		for chart in "${now_charts[@]}"; do
-			MODULE_NAME="${chart}"
-
-			if [ ${now_ms} -ge ${charts_next_update[$chart]} ]; then
-				last_ms=${charts_last_update[$chart]}
-				dt=$((now_ms - last_ms))
-
-				charts_last_update[$chart]=${now_ms}
-
-				while [ ${charts_next_update[$chart]} -lt ${now_ms} ]; do
-					charts_next_update[$chart]=$((charts_next_update[$chart] + (charts_update_every[$chart] * 1000)))
-				done
-
-				# the first call should not give a duration
-				# so that netdata calibrates to current time
-				dt=$((dt * 1000))
-				charts_run_counter[$chart]=$((charts_run_counter[$chart] + 1))
-				if [ ${charts_run_counter[$chart]} -eq 1 ]; then
-					dt=
-				fi
-
-				exec_start_ms=$now_ms
-				$chart$charts_update $dt
-				ret=$?
-
-				# return the current time in ms in $now_ms
-				${current_time_ms}
-				exec_end_ms=$now_ms
-
-				echo "BEGIN netdata.plugin_chartsd_$chart $dt"
-				echo "SET run_time = $((exec_end_ms - exec_start_ms))"
-				echo "END"
-
-				if [ $ret -eq 0 ]; then
-					charts_serial_failures[$chart]=0
-					next_charts+=($chart)
-				else
-					charts_serial_failures[$chart]=$((charts_serial_failures[$chart] + 1))
-
-					if [ ${charts_serial_failures[$chart]} -gt ${charts_retries[$chart]} ]; then
-						error "module's '$chart' update() function reported failure ${charts_serial_failures[$chart]} times. Disabling it."
-					else
-						error "module's '$chart' update() function reports failure. Will keep trying for a while."
-						next_charts+=($chart)
-					fi
-				fi
-			else
-				next_charts+=($chart)
-			fi
-		done
-		MODULE_NAME="${chart}"
-
-		# wait the time you are required to
-		next_ms=$((now_ms + (update_every * 1000 * 100)))
-		for x in "${charts_next_update[@]}"; do [ ${x} -lt ${next_ms} ] && next_ms=${x}; done
-		next_ms=$((next_ms - now_ms))
-
-		if [ ${LOOPSLEEPMS_HIGHRES} -eq 1 -a ${next_ms} -gt 0 ]; then
-			next_ms=$((next_ms + current_time_ms_accuracy))
-			seconds=$((next_ms / 1000))
-			millis=$((next_ms % 1000))
-			if [ ${millis} -lt 10 ]; then
-				millis="00${millis}"
-			elif [ ${millis} -lt 100 ]; then
-				millis="0${millis}"
-			fi
-
-			debug "sleeping for ${seconds}.${millis} seconds."
-			${mysleep} ${seconds}.${millis}
-		else
-			debug "sleeping for ${update_every} seconds."
-			${mysleep} $update_every
-		fi
-
-		test ${now_ms} -ge ${exit_at} && exit 0
-	done
-
-	fatal "nothing left to do, exiting..."
-}
-
-global_update