diff options
Diffstat (limited to 'collectors/charts.d.plugin')
| -rw-r--r-- | collectors/charts.d.plugin/Makefile.in | 960 | ||||
| -rw-r--r-- | collectors/charts.d.plugin/charts.d.plugin | 691 |
2 files changed, 1651 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/Makefile.in b/collectors/charts.d.plugin/Makefile.in new file mode 100644 index 00000000..99b331b5 --- /dev/null +++ b/collectors/charts.d.plugin/Makefile.in @@ -0,0 +1,960 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# SPDX-License-Identifier: GPL-3.0-or-later + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +DIST_COMMON = $(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc \ + $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc \ + $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc \ + $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc \ + $(srcdir)/hddtemp/Makefile.inc \ + $(srcdir)/libreswan/Makefile.inc \ + $(srcdir)/load_average/Makefile.inc \ + $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc \ + $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc \ + $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc \ + $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc \ + $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc \ + $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(dist_charts_SCRIPTS) $(dist_plugins_SCRIPTS) \ + $(dist_charts_DATA) $(dist_chartsconfig_DATA) \ + $(dist_libconfig_DATA) $(dist_noinst_DATA) \ + $(dist_userchartsconfig_DATA) +subdir = collectors/charts.d.plugin +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \ + $(top_srcdir)/build/m4/ax_c__generic.m4 \ + $(top_srcdir)/build/m4/ax_c_lto.m4 \ + $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \ + $(top_srcdir)/build/m4/ax_c_mallopt.m4 \ + $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \ + $(top_srcdir)/build/m4/ax_pthread.m4 \ + $(top_srcdir)/build/m4/jemalloc.m4 \ + $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" \ + "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" \ + "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)" +SCRIPTS = $(dist_charts_SCRIPTS) $(dist_plugins_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +DATA = $(dist_charts_DATA) $(dist_chartsconfig_DATA) \ + $(dist_libconfig_DATA) $(dist_noinst_DATA) \ + $(dist_userchartsconfig_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CUPSCONFIG = @CUPSCONFIG@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@ +IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@ +LDFLAGS = @LDFLAGS@ +LIBCAP_CFLAGS = @LIBCAP_CFLAGS@ +LIBCAP_LIBS = @LIBCAP_LIBS@ +LIBMNL_CFLAGS = @LIBMNL_CFLAGS@ +LIBMNL_LIBS = @LIBMNL_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MATH_CFLAGS = @MATH_CFLAGS@ +MATH_LIBS = @MATH_LIBS@ +MKDIR_P = @MKDIR_P@ +NFACCT_CFLAGS = @NFACCT_CFLAGS@ +NFACCT_LIBS = @NFACCT_LIBS@ +OBJEXT = @OBJEXT@ +OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@ +OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@ +OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@ +OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@ +OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@ +OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@ +OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@ +OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@ +OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@ +OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@ +OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@ +OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@ +OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@ +OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@ +OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@ +OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSE_CANDIDATE = @SSE_CANDIDATE@ +STRIP = @STRIP@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VERSION = @VERSION@ +XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@ +XENLIGHT_LIBS = @XENLIGHT_LIBS@ +YAJL_CFLAGS = @YAJL_CFLAGS@ +YAJL_LIBS = @YAJL_LIBS@ +ZLIB_CFLAGS = @ZLIB_CFLAGS@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_target = @build_target@ +build_vendor = @build_vendor@ +builddir = @builddir@ +cachedir = @cachedir@ +chartsdir = @chartsdir@ +configdir = @configdir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +has_jemalloc = @has_jemalloc@ +has_tcmalloc = @has_tcmalloc@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libconfigdir = @libconfigdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logdir = @logdir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nodedir = @nodedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pluginsdir = @pluginsdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +pythondir = @pythondir@ +registrydir = @registrydir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +varlibdir = @varlibdir@ +webdir = @webdir@ +MAINTAINERCLEANFILES = $(srcdir)/Makefile.in +CLEANFILES = \ + charts.d.plugin \ + $(NULL) + +SUFFIXES = .in +dist_libconfig_DATA = \ + charts.d.conf \ + $(NULL) + +dist_plugins_SCRIPTS = \ + charts.d.dryrun-helper.sh \ + charts.d.plugin \ + loopsleepms.sh.inc \ + $(NULL) + + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution +dist_noinst_DATA = charts.d.plugin.in README.md $(NULL) ap/README.md \ + ap/Makefile.inc apache/README.md apache/Makefile.inc \ + apcupsd/README.md apcupsd/Makefile.inc cpu_apps/README.md \ + cpu_apps/Makefile.inc cpufreq/README.md cpufreq/Makefile.inc \ + example/README.md example/Makefile.inc exim/README.md \ + exim/Makefile.inc hddtemp/README.md hddtemp/Makefile.inc \ + libreswan/README.md libreswan/Makefile.inc \ + load_average/README.md load_average/Makefile.inc \ + mem_apps/README.md mem_apps/Makefile.inc mysql/README.md \ + mysql/Makefile.inc nginx/README.md nginx/Makefile.inc \ + nut/README.md nut/Makefile.inc opensips/README.md \ + opensips/Makefile.inc phpfpm/README.md phpfpm/Makefile.inc \ + postfix/README.md postfix/Makefile.inc sensors/README.md \ + sensors/Makefile.inc squid/README.md squid/Makefile.inc \ + tomcat/README.md tomcat/Makefile.inc +dist_charts_SCRIPTS = \ + $(NULL) + + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files +dist_charts_DATA = $(NULL) ap/ap.chart.sh apache/apache.chart.sh \ + apcupsd/apcupsd.chart.sh cpu_apps/cpu_apps.chart.sh \ + cpufreq/cpufreq.chart.sh example/example.chart.sh \ + exim/exim.chart.sh hddtemp/hddtemp.chart.sh \ + libreswan/libreswan.chart.sh \ + load_average/load_average.chart.sh mem_apps/mem_apps.chart.sh \ + mysql/mysql.chart.sh nginx/nginx.chart.sh nut/nut.chart.sh \ + opensips/opensips.chart.sh phpfpm/phpfpm.chart.sh \ + postfix/postfix.chart.sh sensors/sensors.chart.sh \ + squid/squid.chart.sh tomcat/tomcat.chart.sh +userchartsconfigdir = $(configdir)/charts.d +dist_userchartsconfig_DATA = \ + .keep \ + $(NULL) + +chartsconfigdir = $(libconfigdir)/charts.d +dist_chartsconfig_DATA = $(NULL) ap/ap.conf apache/apache.conf \ + apcupsd/apcupsd.conf cpu_apps/cpu_apps.conf \ + cpufreq/cpufreq.conf example/example.conf exim/exim.conf \ + hddtemp/hddtemp.conf libreswan/libreswan.conf \ + load_average/load_average.conf mem_apps/mem_apps.conf \ + mysql/mysql.conf nginx/nginx.conf nut/nut.conf \ + opensips/opensips.conf phpfpm/phpfpm.conf postfix/postfix.conf \ + sensors/sensors.conf squid/squid.conf tomcat/tomcat.conf +all: all-am + +.SUFFIXES: +.SUFFIXES: .in +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc: + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-dist_chartsSCRIPTS: $(dist_charts_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(chartsdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(chartsdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_chartsSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir) +install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_pluginsSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) +install-dist_chartsDATA: $(dist_charts_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsdir)" || exit $$?; \ + done + +uninstall-dist_chartsDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir) +install-dist_chartsconfigDATA: $(dist_chartsconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(chartsconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(chartsconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsconfigdir)" || exit $$?; \ + done + +uninstall-dist_chartsconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(chartsconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_libconfigDATA: $(dist_libconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \ + done + +uninstall-dist_libconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_userchartsconfigDATA: $(dist_userchartsconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(userchartsconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(userchartsconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userchartsconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(userchartsconfigdir)" || exit $$?; \ + done + +uninstall-dist_userchartsconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(userchartsconfigdir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) $(DATA) +installdirs: + for dir in "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_chartsDATA install-dist_chartsSCRIPTS \ + install-dist_chartsconfigDATA install-dist_libconfigDATA \ + install-dist_pluginsSCRIPTS install-dist_userchartsconfigDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \ + uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \ + uninstall-dist_pluginsSCRIPTS \ + uninstall-dist_userchartsconfigDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dist_chartsDATA \ + install-dist_chartsSCRIPTS install-dist_chartsconfigDATA \ + install-dist_libconfigDATA install-dist_pluginsSCRIPTS \ + install-dist_userchartsconfigDATA install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \ + uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \ + uninstall-dist_pluginsSCRIPTS \ + uninstall-dist_userchartsconfigDATA + +.in: + if sed \ + -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \ + -e 's#[@]sbindir_POST@#$(sbindir)#g' \ + -e 's#[@]configdir_POST@#$(configdir)#g' \ + -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \ + -e 's#[@]cachedir_POST@#$(cachedir)#g' \ + -e 's#[@]registrydir_POST@#$(registrydir)#g' \ + -e 's#[@]varlibdir_POST@#$(varlibdir)#g' \ + $< > $@.tmp; then \ + mv "$@.tmp" "$@"; \ + else \ + rm -f "$@.tmp"; \ + false; \ + fi + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/collectors/charts.d.plugin/charts.d.plugin b/collectors/charts.d.plugin/charts.d.plugin new file mode 100644 index 00000000..a2423bbc --- /dev/null +++ b/collectors/charts.d.plugin/charts.d.plugin @@ -0,0 +1,691 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2017 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ +# +# charts.d.plugin allows easy development of BASH plugins +# +# if you need to run parallel charts.d processes, link this file to a different name +# in the same directory, with a .plugin suffix and netdata will start both of them, +# each will have a different config file and modules configuration directory. +# + +export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin" + +PROGRAM_FILE="$0" +PROGRAM_NAME="$(basename $0)" +PROGRAM_NAME="${PROGRAM_NAME/.plugin/}" +MODULE_NAME="main" + +# ----------------------------------------------------------------------------- +# create temp dir + +debug=0 +TMP_DIR= +chartsd_cleanup() { + trap '' EXIT QUIT HUP INT TERM + + if [ ! -z "$TMP_DIR" -a -d "$TMP_DIR" ]; then + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: cleaning up temporary directory $TMP_DIR ..." + rm -rf "$TMP_DIR" + fi + exit 0 +} +trap chartsd_cleanup EXIT QUIT HUP INT TERM + +if [ $UID = "0" ]; then + TMP_DIR="$(mktemp -d /var/run/netdata-${PROGRAM_NAME}-XXXXXXXXXX)" +else + TMP_DIR="$(mktemp -d /tmp/.netdata-${PROGRAM_NAME}-XXXXXXXXXX)" +fi + +logdate() { + date "+%Y-%m-%d %H:%M:%S" +} + +log() { + local status="${1}" + shift + + echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: ${*}" + +} + +warning() { + log WARNING "${@}" +} + +error() { + log ERROR "${@}" +} + +info() { + log INFO "${@}" +} + +fatal() { + log FATAL "${@}" + echo "DISABLE" + exit 1 +} + +debug() { + [ $debug -eq 1 ] && log DEBUG "${@}" +} + +# ----------------------------------------------------------------------------- +# check a few commands + +require_cmd() { + local x=$(which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null) + if [ -z "${x}" -o ! -x "${x}" ]; then + warning "command '${1}' is not found in ${PATH}." + eval "${1^^}_CMD=\"\"" + return 1 + fi + + eval "${1^^}_CMD=\"${x}\"" + return 0 +} + +require_cmd date || exit 1 +require_cmd sed || exit 1 +require_cmd basename || exit 1 +require_cmd dirname || exit 1 +require_cmd cat || exit 1 +require_cmd grep || exit 1 +require_cmd egrep || exit 1 +require_cmd mktemp || exit 1 +require_cmd awk || exit 1 +require_cmd timeout || exit 1 +require_cmd curl || exit 1 + +# ----------------------------------------------------------------------------- + +[ $((BASH_VERSINFO[0])) -lt 4 ] && fatal "BASH version 4 or later is required, but found version: ${BASH_VERSION}. Please upgrade." + +info "started from '$PROGRAM_FILE' with options: $*" + +# ----------------------------------------------------------------------------- +# internal defaults +# netdata exposes a few environment variables for us + +[ -z "${NETDATA_PLUGINS_DIR}" ] && NETDATA_PLUGINS_DIR="$(dirname "${0}")" +[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="/etc/netdata" +[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="/usr/lib/netdata/conf.d" + +pluginsd="${NETDATA_PLUGINS_DIR}" +stockconfd="${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}" +userconfd="${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}" +olduserconfd="${NETDATA_USER_CONFIG_DIR}" +chartsd="$pluginsd/../charts.d" + +minimum_update_frequency="${NETDATA_UPDATE_EVERY-1}" +update_every=${minimum_update_frequency} # this will be overwritten by the command line + +# work around for non BASH shells +charts_create="_create" +charts_update="_update" +charts_check="_check" +charts_undescore="_" + +# when making iterations, charts.d can loop more frequently +# to prevent plugins missing iterations. +# this is a percentage relative to update_every to align its +# iterations. +# The minimum is 10%, the maximum 100%. +# So, if update_every is 1 second and time_divisor is 50, +# charts.d will iterate every 500ms. +# Charts will be called to collect data only if the time +# passed since the last time the collected data is equal or +# above their update_every. +time_divisor=50 + +# number of seconds to run without restart +# after this time, charts.d.plugin will exit +# netdata will restart it +restart_timeout=$((3600 * 4)) + +# check if the charts.d plugins are using global variables +# they should not. +# It does not currently support BASH v4 arrays, so it is +# disabled +dryrunner=0 + +# check for timeout command +check_for_timeout=1 + +# the default enable/disable value for all charts +enable_all_charts="yes" + +# ----------------------------------------------------------------------------- +# parse parameters + +check=0 +chart_only= +while [ ! -z "$1" ]; do + if [ "$1" = "check" ]; then + check=1 + shift + continue + fi + + if [ "$1" = "debug" -o "$1" = "all" ]; then + debug=1 + shift + continue + fi + + if [ -f "$chartsd/$1.chart.sh" ]; then + debug=1 + chart_only="$(echo $1.chart.sh | sed "s/\.chart\.sh$//g")" + shift + continue + fi + + if [ -f "$chartsd/$1" ]; then + debug=1 + chart_only="$(echo $1 | sed "s/\.chart\.sh$//g")" + shift + continue + fi + + # number check + n="$1" + x=$((n)) + if [ "$x" = "$n" ]; then + shift + update_every=$x + [ $update_every -lt $minimum_update_frequency ] && update_every=$minimum_update_frequency + continue + fi + + fatal "Cannot understand parameter $1. Aborting." +done + +# ----------------------------------------------------------------------------- +# loop control + +# default sleep function +LOOPSLEEPMS_HIGHRES=0 +now_ms= +current_time_ms_default() { + now_ms="$(date +'%s')000" +} +current_time_ms="current_time_ms_default" +current_time_ms_accuracy=1 +mysleep="sleep" + +# if found and included, this file overwrites loopsleepms() +# and current_time_ms() with a high resolution timer function +# for precise looping. +source "$pluginsd/loopsleepms.sh.inc" +[ $? -ne 0 ] && error "Failed to load '$pluginsd/loopsleepms.sh.inc'." + +# ----------------------------------------------------------------------------- +# load my configuration + +for myconfig in "${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}.conf" "${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf"; do + if [ -f "$myconfig" ]; then + source "$myconfig" + if [ $? -ne 0 ]; then + error "Config file '$myconfig' loaded with errors." + else + info "Configuration file '$myconfig' loaded." + fi + else + warning "Configuration file '$myconfig' not found." + fi +done + +# make sure time_divisor is right +time_divisor=$((time_divisor)) +[ $time_divisor -lt 10 ] && time_divisor=10 +[ $time_divisor -gt 100 ] && time_divisor=100 + +# we check for the timeout command, after we load our +# configuration, so that the user may overwrite the +# timeout command we use, providing a function that +# can emulate the timeout command we need: +# > timeout SECONDS command ... +if [ $check_for_timeout -eq 1 ]; then + require_cmd timeout || exit 1 +fi + +# ----------------------------------------------------------------------------- +# internal checks + +# netdata passes the requested update frequency as the first argument +update_every=$((update_every + 1 - 1)) # makes sure it is a number +test $update_every -eq 0 && update_every=1 # if it is zero, make it 1 + +# check the charts.d directory +[ ! -d "$chartsd" ] && fatal "cannot find charts directory '$chartsd'" + +# ----------------------------------------------------------------------------- +# library functions + +fixid() { + echo "$*" | + tr -c "[A-Z][a-z][0-9]" "_" | + sed -e "s|^_\+||g" -e "s|_\+$||g" -e "s|_\+|_|g" | + tr "[A-Z]" "[a-z]" +} + +run() { + local ret pid="${BASHPID}" t + + if [ "z${1}" = "z-t" -a "${2}" != "0" ]; then + t="${2}" + shift 2 + timeout ${t} "${@}" 2>"${TMP_DIR}/run.${pid}" + ret=$? + else + "${@}" 2>"${TMP_DIR}/run.${pid}" + ret=$? + fi + + if [ ${ret} -ne 0 ]; then + { + printf "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: command '" + printf "%q " "${@}" + printf "' failed with code ${ret}:\n --- BEGIN TRACE ---\n" + cat "${TMP_DIR}/run.${pid}" + printf " --- END TRACE ---\n" + } >&2 + fi + rm "${TMP_DIR}/run.${pid}" + + return ${ret} +} + +# convert any floating point number +# to integer, give a multiplier +# the result is stored in ${FLOAT2INT_RESULT} +# so that no fork is necessary +# the multiplier must be a power of 10 +float2int() { + local f m="$2" a b l v=($1) + f=${v[0]} + + # the length of the multiplier - 1 + l=$((${#m} - 1)) + + # check if the number is in scientific notation + if [[ ${f} =~ ^[[:space:]]*(-)?[0-9.]+(e|E)(\+|-)[0-9]+ ]]; then + # convert it to decimal + # unfortunately, this fork cannot be avoided + # if you know of a way to avoid it, please let me know + f=$(printf "%0.${l}f" ${f}) + fi + + # split the floating point number + # in integer (a) and decimal (b) + a=${f/.*/} + b=${f/*./} + + # if the integer part is missing + # set it to zero + [ -z "${a}" ] && a="0" + + # strip leading zeros from the integer part + # base 10 convertion + a=$((10#$a)) + + # check the length of the decimal part + # against the length of the multiplier + if [ ${#b} -gt ${l} ]; then + # too many digits - take the most significant + b=${b:0:l} + + elif [ ${#b} -lt ${l} ]; then + # too few digits - pad with zero on the right + local z="00000000000000000000000" r=$((l - ${#b})) + b="${b}${z:0:r}" + fi + + # strip leading zeros from the decimal part + # base 10 convertion + b=$((10#$b)) + + # store the result + FLOAT2INT_RESULT=$(((a * m) + b)) +} + +# ----------------------------------------------------------------------------- +# charts check functions + +all_charts() { + cd "$chartsd" + [ $? -ne 0 ] && error "cannot cd to $chartsd" && return 1 + + ls *.chart.sh | sed "s/\.chart\.sh$//g" +} + +declare -A charts_enable_keyword=( + ['apache']="force" + ['cpu_apps']="force" + ['cpufreq']="force" + ['example']="force" + ['exim']="force" + ['hddtemp']="force" + ['load_average']="force" + ['mem_apps']="force" + ['mysql']="force" + ['nginx']="force" + ['phpfpm']="force" + ['postfix']="force" + ['sensors']="force" + ['squid']="force" + ['tomcat']="force" +) + +all_enabled_charts() { + local charts= enabled= required= + + # find all enabled charts + + for chart in $(all_charts); do + MODULE_NAME="${chart}" + + eval "enabled=\$$chart" + if [ -z "${enabled}" ]; then + enabled="${enable_all_charts}" + fi + + required="${charts_enable_keyword[${chart}]}" + [ -z "${required}" ] && required="yes" + + if [ ! "${enabled}" = "${required}" ]; then + info "is disabled. Add a line with $chart=$required in '${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf' to enable it (or remove the line that disables it)." + else + debug "is enabled for auto-detection." + local charts="$charts $chart" + fi + done + MODULE_NAME="main" + + local charts2= + for chart in $charts; do + MODULE_NAME="${chart}" + + # check the enabled charts + local check="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_check()")" + if [ -z "$check" ]; then + error "module '$chart' does not seem to have a $chart$charts_check() function. Disabling it." + continue + fi + + local create="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_create()")" + if [ -z "$create" ]; then + error "module '$chart' does not seem to have a $chart$charts_create() function. Disabling it." + continue + fi + + local update="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_update()")" + if [ -z "$update" ]; then + error "module '$chart' does not seem to have a $chart$charts_update() function. Disabling it." + continue + fi + + # check its config + #if [ -f "$userconfd/$chart.conf" ] + #then + # if [ ! -z "$( cat "$userconfd/$chart.conf" | sed "s/^ \+//g" | grep -v "^$" | grep -v "^#" | grep -v "^$chart$charts_undescore" )" ] + # then + # error "module's $chart config $userconfd/$chart.conf should only have lines starting with $chart$charts_undescore . Disabling it." + # continue + # fi + #fi + + #if [ $dryrunner -eq 1 ] + # then + # "$pluginsd/charts.d.dryrun-helper.sh" "$chart" "$chartsd/$chart.chart.sh" "$userconfd/$chart.conf" >/dev/null + # if [ $? -ne 0 ] + # then + # error "module's $chart did not pass the dry run check. This means it uses global variables not starting with $chart. Disabling it." + # continue + # fi + #fi + + local charts2="$charts2 $chart" + done + MODULE_NAME="main" + + echo $charts2 + debug "enabled charts: $charts2" +} + +# ----------------------------------------------------------------------------- +# load the charts + +suffix_retries="_retries" +suffix_update_every="_update_every" +active_charts= +for chart in $(all_enabled_charts); do + MODULE_NAME="${chart}" + + debug "loading module: '$chartsd/$chart.chart.sh'" + + source "$chartsd/$chart.chart.sh" + [ $? -ne 0 ] && warning "Module '$chartsd/$chart.chart.sh' loaded with errors." + + # first load the stock config + if [ -f "$stockconfd/$chart.conf" ]; then + debug "loading module configuration: '$stockconfd/$chart.conf'" + source "$stockconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$stockconfd/$chart.conf' loaded with errors." + else + debug "not found module configuration: '$stockconfd/$chart.conf'" + fi + + # then load the user config (it overwrites the stock) + if [ -f "$userconfd/$chart.conf" ]; then + debug "loading module configuration: '$userconfd/$chart.conf'" + source "$userconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$userconfd/$chart.conf' loaded with errors." + else + debug "not found module configuration: '$userconfd/$chart.conf'" + + if [ -f "$olduserconfd/$chart.conf" ]; then + # support for very old netdata that had the charts.d module configs in /etc/netdata + info "loading module configuration from obsolete location: '$olduserconfd/$chart.conf'" + source "$olduserconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$olduserconfd/$chart.conf' loaded with errors." + fi + fi + + eval "dt=\$$chart$suffix_update_every" + dt=$((dt + 1 - 1)) # make sure it is a number + if [ $dt -lt $update_every ]; then + eval "$chart$suffix_update_every=$update_every" + fi + + $chart$charts_check + if [ $? -eq 0 ]; then + debug "module '$chart' activated" + active_charts="$active_charts $chart" + else + error "module's '$chart' check() function reports failure." + fi +done +MODULE_NAME="main" +debug "activated modules: $active_charts" + +# ----------------------------------------------------------------------------- +# check overwrites + +# enable work time reporting +debug_time= +test $debug -eq 1 && debug_time=tellwork + +# if we only need a specific chart, remove all the others +if [ ! -z "${chart_only}" ]; then + debug "requested to run only for: '${chart_only}'" + check_charts= + for chart in $active_charts; do + if [ "$chart" = "$chart_only" ]; then + check_charts="$chart" + break + fi + done + active_charts="$check_charts" +fi +debug "activated charts: $active_charts" + +# stop if we just need a pre-check +if [ $check -eq 1 ]; then + info "CHECK RESULT" + info "Will run the charts: $active_charts" + exit 0 +fi + +# ----------------------------------------------------------------------------- + +cd "${TMP_DIR}" || exit 1 + +# ----------------------------------------------------------------------------- +# create charts + +run_charts= +for chart in $active_charts; do + MODULE_NAME="${chart}" + + debug "calling '$chart$charts_create()'..." + $chart$charts_create + if [ $? -eq 0 ]; then + run_charts="$run_charts $chart" + debug "'$chart' initialized." + else + error "module's '$chart' function '$chart$charts_create()' reports failure." + fi +done +MODULE_NAME="main" +debug "run_charts='$run_charts'" + +# ----------------------------------------------------------------------------- +# update dimensions + +[ -z "$run_charts" ] && fatal "No charts to collect data from." + +declare -A charts_last_update=() charts_update_every=() charts_retries=() charts_next_update=() charts_run_counter=() charts_serial_failures=() +global_update() { + local exit_at \ + c=0 dt ret last_ms exec_start_ms exec_end_ms \ + chart now_charts=() next_charts=($run_charts) \ + next_ms x seconds millis + + # return the current time in ms in $now_ms + ${current_time_ms} + + exit_at=$((now_ms + (restart_timeout * 1000))) + + for chart in $run_charts; do + eval "charts_update_every[$chart]=\$$chart$suffix_update_every" + test -z "${charts_update_every[$chart]}" && charts_update_every[$chart]=$update_every + + eval "charts_retries[$chart]=\$$chart$suffix_retries" + test -z "${charts_retries[$chart]}" && charts_retries[$chart]=10 + + charts_last_update[$chart]=$((now_ms - (now_ms % (charts_update_every[$chart] * 1000)))) + charts_next_update[$chart]=$((charts_last_update[$chart] + (charts_update_every[$chart] * 1000))) + charts_run_counter[$chart]=0 + charts_serial_failures[$chart]=0 + + echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}" + echo "DIMENSION run_time 'run time' absolute 1 1" + done + + # the main loop + while [ "${#next_charts[@]}" -gt 0 ]; do + c=$((c + 1)) + now_charts=("${next_charts[@]}") + next_charts=() + + # return the current time in ms in $now_ms + ${current_time_ms} + + for chart in "${now_charts[@]}"; do + MODULE_NAME="${chart}" + + if [ ${now_ms} -ge ${charts_next_update[$chart]} ]; then + last_ms=${charts_last_update[$chart]} + dt=$((now_ms - last_ms)) + + charts_last_update[$chart]=${now_ms} + + while [ ${charts_next_update[$chart]} -lt ${now_ms} ]; do + charts_next_update[$chart]=$((charts_next_update[$chart] + (charts_update_every[$chart] * 1000))) + done + + # the first call should not give a duration + # so that netdata calibrates to current time + dt=$((dt * 1000)) + charts_run_counter[$chart]=$((charts_run_counter[$chart] + 1)) + if [ ${charts_run_counter[$chart]} -eq 1 ]; then + dt= + fi + + exec_start_ms=$now_ms + $chart$charts_update $dt + ret=$? + + # return the current time in ms in $now_ms + ${current_time_ms} + exec_end_ms=$now_ms + + echo "BEGIN netdata.plugin_chartsd_$chart $dt" + echo "SET run_time = $((exec_end_ms - exec_start_ms))" + echo "END" + + if [ $ret -eq 0 ]; then + charts_serial_failures[$chart]=0 + next_charts+=($chart) + else + charts_serial_failures[$chart]=$((charts_serial_failures[$chart] + 1)) + + if [ ${charts_serial_failures[$chart]} -gt ${charts_retries[$chart]} ]; then + error "module's '$chart' update() function reported failure ${charts_serial_failures[$chart]} times. Disabling it." + else + error "module's '$chart' update() function reports failure. Will keep trying for a while." + next_charts+=($chart) + fi + fi + else + next_charts+=($chart) + fi + done + MODULE_NAME="${chart}" + + # wait the time you are required to + next_ms=$((now_ms + (update_every * 1000 * 100))) + for x in "${charts_next_update[@]}"; do [ ${x} -lt ${next_ms} ] && next_ms=${x}; done + next_ms=$((next_ms - now_ms)) + + if [ ${LOOPSLEEPMS_HIGHRES} -eq 1 -a ${next_ms} -gt 0 ]; then + next_ms=$((next_ms + current_time_ms_accuracy)) + seconds=$((next_ms / 1000)) + millis=$((next_ms % 1000)) + if [ ${millis} -lt 10 ]; then + millis="00${millis}" + elif [ ${millis} -lt 100 ]; then + millis="0${millis}" + fi + + debug "sleeping for ${seconds}.${millis} seconds." + ${mysleep} ${seconds}.${millis} + else + debug "sleeping for ${update_every} seconds." + ${mysleep} $update_every + fi + + test ${now_ms} -ge ${exit_at} && exit 0 + done + + fatal "nothing left to do, exiting..." +} + +global_update |