10 files changed, 82 insertions, 64 deletions
diff --git a/collectors/charts.d.plugin/ap/ap.chart.sh b/collectors/charts.d.plugin/ap/ap.chart.sh
index 5dd787835..80c9dc602 100644
--- a/collectors/charts.d.plugin/ap/ap.chart.sh
+++ b/collectors/charts.d.plugin/ap/ap.chart.sh
@@ -61,25 +61,25 @@ ap_create() {
 
     # create the chart with 3 dimensions
     cat << EOF
-CHART ap_clients.${dev} '' "Connected clients to ${ssid} on ${dev}" "clients" ${dev} ap.clients line $((ap_priority + 1)) $ap_update_every
+CHART ap_clients.${dev} '' "Connected clients to ${ssid} on ${dev}" "clients" ${dev} ap.clients line $((ap_priority + 1)) $ap_update_every '' '' 'ap'
 DIMENSION clients '' absolute 1 1
 
-CHART ap_bandwidth.${dev} '' "Bandwidth for ${ssid} on ${dev}" "kilobits/s" ${dev} ap.net area $((ap_priority + 2)) $ap_update_every
+CHART ap_bandwidth.${dev} '' "Bandwidth for ${ssid} on ${dev}" "kilobits/s" ${dev} ap.net area $((ap_priority + 2)) $ap_update_every '' '' 'ap'
 DIMENSION received '' incremental 8 1024
 DIMENSION sent '' incremental -8 1024
 
-CHART ap_packets.${dev} '' "Packets for ${ssid} on ${dev}" "packets/s" ${dev} ap.packets line $((ap_priority + 3)) $ap_update_every
+CHART ap_packets.${dev} '' "Packets for ${ssid} on ${dev}" "packets/s" ${dev} ap.packets line $((ap_priority + 3)) $ap_update_every '' '' 'ap'
 DIMENSION received '' incremental 1 1
 DIMENSION sent '' incremental -1 1
 
-CHART ap_issues.${dev} '' "Transmit Issues for ${ssid} on ${dev}" "issues/s" ${dev} ap.issues line $((ap_priority + 4)) $ap_update_every
+CHART ap_issues.${dev} '' "Transmit Issues for ${ssid} on ${dev}" "issues/s" ${dev} ap.issues line $((ap_priority + 4)) $ap_update_every '' '' 'ap'
 DIMENSION retries 'tx retries' incremental 1 1
 DIMENSION failures 'tx failures' incremental -1 1
 
-CHART ap_signal.${dev} '' "Average Signal for ${ssid} on ${dev}" "dBm" ${dev} ap.signal line $((ap_priority + 5)) $ap_update_every
+CHART ap_signal.${dev} '' "Average Signal for ${ssid} on ${dev}" "dBm" ${dev} ap.signal line $((ap_priority + 5)) $ap_update_every '' '' 'ap'
 DIMENSION signal 'average signal' absolute 1 1000
 
-CHART ap_bitrate.${dev} '' "Bitrate for ${ssid} on ${dev}" "Mbps" ${dev} ap.bitrate line $((ap_priority + 6)) $ap_update_every
+CHART ap_bitrate.${dev} '' "Bitrate for ${ssid} on ${dev}" "Mbps" ${dev} ap.bitrate line $((ap_priority + 6)) $ap_update_every '' '' 'ap'
 DIMENSION receive '' absolute 1 1000
 DIMENSION transmit '' absolute -1 1000
 DIMENSION expected 'expected throughput' absolute 1 1000
@@ -92,7 +92,7 @@ EOF
 # _update is called continuously, to collect the values
 ap_update() {
   # the first argument to this function is the microseconds since last update
-  # pass this parameter to the BEGIN statement (see bellow).
+  # pass this parameter to the BEGIN statement (see below).
 
   # do all the work to collect / calculate the values
   # for each dimension
diff --git a/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh b/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh
index 014a9c1de..e78d99e7d 100644
--- a/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh
+++ b/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh
@@ -80,35 +80,35 @@ apcupsd_create() {
 
     # create the charts
     cat << EOF
-CHART apcupsd_${host}.charge '' "UPS Charge for ${host} on ${src}" "percentage" ups apcupsd.charge area $((apcupsd_priority + 1)) $apcupsd_update_every
+CHART apcupsd_${host}.charge '' "UPS Charge for ${host} on ${src}" "percentage" ups apcupsd.charge area $((apcupsd_priority + 1)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION battery_charge charge absolute 1 100
 
-CHART apcupsd_${host}.battery_voltage '' "UPS Battery Voltage for ${host} on ${src}" "Volts" ups apcupsd.battery.voltage line $((apcupsd_priority + 3)) $apcupsd_update_every
+CHART apcupsd_${host}.battery_voltage '' "UPS Battery Voltage for ${host} on ${src}" "Volts" ups apcupsd.battery.voltage line $((apcupsd_priority + 3)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION battery_voltage voltage absolute 1 100
 DIMENSION battery_voltage_nominal nominal absolute 1 100
 
-CHART apcupsd_${host}.input_voltage '' "UPS Input Voltage for ${host} on ${src}" "Volts" input apcupsd.input.voltage line $((apcupsd_priority + 4)) $apcupsd_update_every
+CHART apcupsd_${host}.input_voltage '' "UPS Input Voltage for ${host} on ${src}" "Volts" input apcupsd.input.voltage line $((apcupsd_priority + 4)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION input_voltage voltage absolute 1 100
 DIMENSION input_voltage_min min absolute 1 100
 DIMENSION input_voltage_max max absolute 1 100
 
-CHART apcupsd_${host}.input_frequency '' "UPS Input Frequency for ${host} on ${src}" "Hz" input apcupsd.input.frequency line $((apcupsd_priority + 5)) $apcupsd_update_every
+CHART apcupsd_${host}.input_frequency '' "UPS Input Frequency for ${host} on ${src}" "Hz" input apcupsd.input.frequency line $((apcupsd_priority + 5)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION input_frequency frequency absolute 1 100
 
-CHART apcupsd_${host}.output_voltage '' "UPS Output Voltage for ${host} on ${src}" "Volts" output apcupsd.output.voltage line $((apcupsd_priority + 6)) $apcupsd_update_every
+CHART apcupsd_${host}.output_voltage '' "UPS Output Voltage for ${host} on ${src}" "Volts" output apcupsd.output.voltage line $((apcupsd_priority + 6)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION output_voltage voltage absolute 1 100
 DIMENSION output_voltage_nominal nominal absolute 1 100
 
-CHART apcupsd_${host}.load '' "UPS Load for ${host} on ${src}" "percentage" ups apcupsd.load area $((apcupsd_priority)) $apcupsd_update_every
+CHART apcupsd_${host}.load '' "UPS Load for ${host} on ${src}" "percentage" ups apcupsd.load area $((apcupsd_priority)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION load load absolute 1 100
 
-CHART apcupsd_${host}.temp '' "UPS Temperature for ${host} on ${src}" "Celsius" ups apcupsd.temperature line $((apcupsd_priority + 7)) $apcupsd_update_every
+CHART apcupsd_${host}.temp '' "UPS Temperature for ${host} on ${src}" "Celsius" ups apcupsd.temperature line $((apcupsd_priority + 7)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION temp temp absolute 1 100
 
-CHART apcupsd_${host}.time '' "UPS Time Remaining for ${host} on ${src}" "Minutes" ups apcupsd.time area $((apcupsd_priority + 2)) $apcupsd_update_every
+CHART apcupsd_${host}.time '' "UPS Time Remaining for ${host} on ${src}" "Minutes" ups apcupsd.time area $((apcupsd_priority + 2)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION time time absolute 1 100
 
-CHART apcupsd_${host}.online '' "UPS ONLINE flag for ${host} on ${src}" "boolean" ups apcupsd.online line $((apcupsd_priority + 8)) $apcupsd_update_every
+CHART apcupsd_${host}.online '' "UPS ONLINE flag for ${host} on ${src}" "boolean" ups apcupsd.online line $((apcupsd_priority + 8)) $apcupsd_update_every '' '' 'apcupsd'
 DIMENSION online online absolute 0 1
 
 EOF
@@ -118,7 +118,7 @@ EOF
 
 apcupsd_update() {
   # the first argument to this function is the microseconds since last update
-  # pass this parameter to the BEGIN statement (see bellow).
+  # pass this parameter to the BEGIN statement (see below).
 
   # do all the work to collect / calculate the values
   # for each dimension
@@ -154,7 +154,7 @@ BEGIN {
 /^LOADPCT.*/   { load = \$3 * 100 };
 /^ITEMP.*/     { temp = \$3 * 100 };
 /^TIMELEFT.*/  { time = \$3 * 100 };
-/^STATUS.*/    { online=(\$3 == \"ONLINE\" || \$3 == \"ONBATT\")?1:0 };
+/^STATUS.*/    { online=(\$3 != \"COMMLOST\" && !(\$3 == \"SHUTTING\" && \$4 == \"DOWN\"))?1:0 };
 END {
 	print \"BEGIN apcupsd_${host}.online $1\";
 	print \"SET online = \" online;
diff --git a/collectors/charts.d.plugin/charts.d.conf b/collectors/charts.d.plugin/charts.d.conf
index 0872d39e6..2d32f73ea 100644
--- a/collectors/charts.d.plugin/charts.d.conf
+++ b/collectors/charts.d.plugin/charts.d.conf
@@ -45,3 +45,4 @@
 # Nothing useful.
 # Just an example charts.d plugin you can use as a template.
 # example=force
+# sensors=force
diff --git a/collectors/charts.d.plugin/charts.d.plugin.in b/collectors/charts.d.plugin/charts.d.plugin.in
index 1b5c3f337..9187fc25d 100755
--- a/collectors/charts.d.plugin/charts.d.plugin.in
+++ b/collectors/charts.d.plugin/charts.d.plugin.in
@@ -634,7 +634,7 @@ global_update() {
 		charts_run_counter[$chart]=0
 		charts_serial_failures[$chart]=0
 
-		echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}"
+		echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]} '' '' '$chart'"
 		echo "DIMENSION run_time 'run time' absolute 1 1"
 	done
 
diff --git a/collectors/charts.d.plugin/example/example.chart.sh b/collectors/charts.d.plugin/example/example.chart.sh
index 5ff51a579..6bbbcf1d7 100644
--- a/collectors/charts.d.plugin/example/example.chart.sh
+++ b/collectors/charts.d.plugin/example/example.chart.sh
@@ -89,11 +89,11 @@ example_check() {
 example_create() {
   # create the chart with 3 dimensions
   cat << EOF
-CHART example.random '' "Random Numbers Stacked Chart" "% of random numbers" random random stacked $((example_priority)) $example_update_every
+CHART example.random '' "Random Numbers Stacked Chart" "% of random numbers" random random stacked $((example_priority)) $example_update_every '' '' 'example'
 DIMENSION random1 '' percentage-of-absolute-row 1 1
 DIMENSION random2 '' percentage-of-absolute-row 1 1
 DIMENSION random3 '' percentage-of-absolute-row 1 1
-CHART example.random2 '' "A random number" "random number" random random area $((example_priority + 1)) $example_update_every
+CHART example.random2 '' "A random number" "random number" random random area $((example_priority + 1)) $example_update_every '' '' 'example'
 DIMENSION random '' absolute 1 1
 EOF
 
@@ -103,7 +103,7 @@ EOF
 # _update is called continuously, to collect the values
 example_update() {
   # the first argument to this function is the microseconds since last update
-  # pass this parameter to the BEGIN statement (see bellow).
+  # pass this parameter to the BEGIN statement (see below).
 
   example_get || return 1
 
diff --git a/collectors/charts.d.plugin/libreswan/libreswan.chart.sh b/collectors/charts.d.plugin/libreswan/libreswan.chart.sh
index a3a56b26d..d526f7a91 100644
--- a/collectors/charts.d.plugin/libreswan/libreswan.chart.sh
+++ b/collectors/charts.d.plugin/libreswan/libreswan.chart.sh
@@ -124,10 +124,10 @@ libreswan_create_one() {
   libreswan_tunnel_charts[${name}]="$(fixid "${name}")"
 
   cat << EOF
-CHART libreswan.${libreswan_tunnel_charts[${name}]}_net '${name}_net' "LibreSWAN Tunnel ${name} Traffic" "kilobits/s" "${name}" libreswan.net area $((libreswan_priority)) $libreswan_update_every
+CHART libreswan.${libreswan_tunnel_charts[${name}]}_net '${name}_net' "LibreSWAN Tunnel ${name} Traffic" "kilobits/s" "${name}" libreswan.net area $((libreswan_priority)) $libreswan_update_every '' '' 'libreswan'
 DIMENSION in '' incremental 8 1000
 DIMENSION out '' incremental -8 1000
-CHART libreswan.${libreswan_tunnel_charts[${name}]}_uptime '${name}_uptime' "LibreSWAN Tunnel ${name} Uptime" "seconds" "${name}" libreswan.uptime line $((libreswan_priority + 1)) $libreswan_update_every
+CHART libreswan.${libreswan_tunnel_charts[${name}]}_uptime '${name}_uptime' "LibreSWAN Tunnel ${name} Uptime" "seconds" "${name}" libreswan.uptime line $((libreswan_priority + 1)) $libreswan_update_every '' '' 'libreswan'
 DIMENSION uptime '' absolute 1 1
 EOF
 
@@ -173,7 +173,7 @@ VALUESEOF
 # _update is called continuously, to collect the values
 libreswan_update() {
   # the first argument to this function is the microseconds since last update
-  # pass this parameter to the BEGIN statement (see bellow).
+  # pass this parameter to the BEGIN statement (see below).
 
   libreswan_get || return 1
   libreswan_now=$(date +%s)
diff --git a/collectors/charts.d.plugin/nut/nut.chart.sh b/collectors/charts.d.plugin/nut/nut.chart.sh
index 60233361e..2f7e3f336 100644
--- a/collectors/charts.d.plugin/nut/nut.chart.sh
+++ b/collectors/charts.d.plugin/nut/nut.chart.sh
@@ -129,7 +129,7 @@ EOF2
 
 nut_update() {
   # the first argument to this function is the microseconds since last update
-  # pass this parameter to the BEGIN statement (see bellow).
+  # pass this parameter to the BEGIN statement (see below).
 
   # do all the work to collect / calculate the values
   # for each dimension
diff --git a/collectors/charts.d.plugin/opensips/opensips.chart.sh b/collectors/charts.d.plugin/opensips/opensips.chart.sh
index d3a2118ce..02401fd59 100644
--- a/collectors/charts.d.plugin/opensips/opensips.chart.sh
+++ b/collectors/charts.d.plugin/opensips/opensips.chart.sh
@@ -49,61 +49,61 @@ opensips_check() {
 opensips_create() {
   # create the charts
   cat << EOF
-CHART opensips.dialogs_active '' "OpenSIPS Active Dialogs" "dialogs" dialogs '' area $((opensips_priority + 1)) $opensips_update_every
+CHART opensips.dialogs_active '' "OpenSIPS Active Dialogs" "dialogs" dialogs '' area $((opensips_priority + 1)) $opensips_update_every '' '' 'opensips'
 DIMENSION dialog_active_dialogs active absolute 1 1
 DIMENSION dialog_early_dialogs early absolute -1 1
 
-CHART opensips.users '' "OpenSIPS Users" "users" users '' line $((opensips_priority + 2)) $opensips_update_every
+CHART opensips.users '' "OpenSIPS Users" "users" users '' line $((opensips_priority + 2)) $opensips_update_every '' '' 'opensips'
 DIMENSION usrloc_registered_users registered absolute 1 1
 DIMENSION usrloc_location_users location absolute 1 1
 DIMENSION usrloc_location_contacts contacts absolute 1 1
 DIMENSION usrloc_location_expires expires incremental -1 1
 
-CHART opensips.registrar '' "OpenSIPS Registrar" "registrations/s" registrar '' line $((opensips_priority + 3)) $opensips_update_every
+CHART opensips.registrar '' "OpenSIPS Registrar" "registrations/s" registrar '' line $((opensips_priority + 3)) $opensips_update_every '' '' 'opensips'
 DIMENSION registrar_accepted_regs accepted incremental 1 1
 DIMENSION registrar_rejected_regs rejected incremental -1 1
 
-CHART opensips.transactions '' "OpenSIPS Transactions" "transactions/s" transactions '' line $((opensips_priority + 4)) $opensips_update_every
+CHART opensips.transactions '' "OpenSIPS Transactions" "transactions/s" transactions '' line $((opensips_priority + 4)) $opensips_update_every '' '' 'opensips'
 DIMENSION tm_UAS_transactions UAS incremental 1 1
 DIMENSION tm_UAC_transactions UAC incremental -1 1
 
-CHART opensips.core_rcv '' "OpenSIPS Core Receives" "queries/s" core '' line $((opensips_priority + 5)) $opensips_update_every
+CHART opensips.core_rcv '' "OpenSIPS Core Receives" "queries/s" core '' line $((opensips_priority + 5)) $opensips_update_every '' '' 'opensips'
 DIMENSION core_rcv_requests requests incremental 1 1
 DIMENSION core_rcv_replies replies incremental -1 1
 
-CHART opensips.core_fwd '' "OpenSIPS Core Forwards" "queries/s" core '' line $((opensips_priority + 6)) $opensips_update_every
+CHART opensips.core_fwd '' "OpenSIPS Core Forwards" "queries/s" core '' line $((opensips_priority + 6)) $opensips_update_every '' '' 'opensips'
 DIMENSION core_fwd_requests requests incremental 1 1
 DIMENSION core_fwd_replies replies incremental -1 1
 
-CHART opensips.core_drop '' "OpenSIPS Core Drops" "queries/s" core '' line $((opensips_priority + 7)) $opensips_update_every
+CHART opensips.core_drop '' "OpenSIPS Core Drops" "queries/s" core '' line $((opensips_priority + 7)) $opensips_update_every '' '' 'opensips'
 DIMENSION core_drop_requests requests incremental 1 1
 DIMENSION core_drop_replies replies incremental -1 1
 
-CHART opensips.core_err '' "OpenSIPS Core Errors" "queries/s" core '' line $((opensips_priority + 8)) $opensips_update_every
+CHART opensips.core_err '' "OpenSIPS Core Errors" "queries/s" core '' line $((opensips_priority + 8)) $opensips_update_every '' '' 'opensips'
 DIMENSION core_err_requests requests incremental 1 1
 DIMENSION core_err_replies replies incremental -1 1
 
-CHART opensips.core_bad '' "OpenSIPS Core Bad" "queries/s" core '' line $((opensips_priority + 9)) $opensips_update_every
+CHART opensips.core_bad '' "OpenSIPS Core Bad" "queries/s" core '' line $((opensips_priority + 9)) $opensips_update_every '' '' 'opensips'
 DIMENSION core_bad_URIs_rcvd bad_URIs_rcvd incremental 1 1
 DIMENSION core_unsupported_methods unsupported_methods incremental 1 1
 DIMENSION core_bad_msg_hdr bad_msg_hdr incremental 1 1
 
-CHART opensips.tm_replies '' "OpenSIPS TM Replies" "replies/s" transactions '' line $((opensips_priority + 10)) $opensips_update_every
+CHART opensips.tm_replies '' "OpenSIPS TM Replies" "replies/s" transactions '' line $((opensips_priority + 10)) $opensips_update_every '' '' 'opensips'
 DIMENSION tm_received_replies received incremental 1 1
 DIMENSION tm_relayed_replies relayed incremental 1 1
 DIMENSION tm_local_replies local incremental 1 1
 
-CHART opensips.transactions_status '' "OpenSIPS Transactions Status" "transactions/s" transactions '' line $((opensips_priority + 11)) $opensips_update_every
+CHART opensips.transactions_status '' "OpenSIPS Transactions Status" "transactions/s" transactions '' line $((opensips_priority + 11)) $opensips_update_every '' '' 'opensips'
 DIMENSION tm_2xx_transactions 2xx incremental 1 1
 DIMENSION tm_3xx_transactions 3xx incremental 1 1
 DIMENSION tm_4xx_transactions 4xx incremental 1 1
 DIMENSION tm_5xx_transactions 5xx incremental 1 1
 DIMENSION tm_6xx_transactions 6xx incremental 1 1
 
-CHART opensips.transactions_inuse '' "OpenSIPS InUse Transactions" "transactions" transactions '' line $((opensips_priority + 12)) $opensips_update_every
+CHART opensips.transactions_inuse '' "OpenSIPS InUse Transactions" "transactions" transactions '' line $((opensips_priority + 12)) $opensips_update_every '' '' 'opensips'
 DIMENSION tm_inuse_transactions inuse absolute 1 1
 
-CHART opensips.sl_replies '' "OpenSIPS SL Replies" "replies/s" core '' line $((opensips_priority + 13)) $opensips_update_every
+CHART opensips.sl_replies '' "OpenSIPS SL Replies" "replies/s" core '' line $((opensips_priority + 13)) $opensips_update_every '' '' 'opensips'
 DIMENSION sl_1xx_replies 1xx incremental 1 1
 DIMENSION sl_2xx_replies 2xx incremental 1 1
 DIMENSION sl_3xx_replies 3xx incremental 1 1
@@ -114,31 +114,31 @@ DIMENSION sl_sent_replies sent incremental 1 1
 DIMENSION sl_sent_err_replies error incremental 1 1
 DIMENSION sl_received_ACKs ACKed incremental 1 1
 
-CHART opensips.dialogs '' "OpenSIPS Dialogs" "dialogs/s" dialogs '' line $((opensips_priority + 14)) $opensips_update_every
+CHART opensips.dialogs '' "OpenSIPS Dialogs" "dialogs/s" dialogs '' line $((opensips_priority + 14)) $opensips_update_every '' '' 'opensips'
 DIMENSION dialog_processed_dialogs processed incremental 1 1
 DIMENSION dialog_expired_dialogs expired incremental 1 1
 DIMENSION dialog_failed_dialogs failed incremental -1 1
 
-CHART opensips.net_waiting '' "OpenSIPS Network Waiting" "kilobytes" net '' line $((opensips_priority + 15)) $opensips_update_every
+CHART opensips.net_waiting '' "OpenSIPS Network Waiting" "kilobytes" net '' line $((opensips_priority + 15)) $opensips_update_every '' '' 'opensips'
 DIMENSION net_waiting_udp UDP absolute 1 1024
 DIMENSION net_waiting_tcp TCP absolute 1 1024
 
-CHART opensips.uri_checks '' "OpenSIPS URI Checks" "checks / sec" uri '' line $((opensips_priority + 16)) $opensips_update_every
+CHART opensips.uri_checks '' "OpenSIPS URI Checks" "checks / sec" uri '' line $((opensips_priority + 16)) $opensips_update_every '' '' 'opensips'
 DIMENSION uri_positive_checks positive incremental 1 1
 DIMENSION uri_negative_checks negative incremental -1 1
 
-CHART opensips.traces '' "OpenSIPS Traces" "traces / sec" traces '' line $((opensips_priority + 17)) $opensips_update_every
+CHART opensips.traces '' "OpenSIPS Traces" "traces / sec" traces '' line $((opensips_priority + 17)) $opensips_update_every '' '' 'opensips'
 DIMENSION siptrace_traced_requests requests incremental 1 1
 DIMENSION siptrace_traced_replies replies incremental -1 1
 
-CHART opensips.shmem '' "OpenSIPS Shared Memory" "kilobytes" mem '' line $((opensips_priority + 18)) $opensips_update_every
+CHART opensips.shmem '' "OpenSIPS Shared Memory" "kilobytes" mem '' line $((opensips_priority + 18)) $opensips_update_every '' '' 'opensips'
 DIMENSION shmem_total_size total absolute 1 1024
 DIMENSION shmem_used_size used absolute 1 1024
 DIMENSION shmem_real_used_size real_used absolute 1 1024
 DIMENSION shmem_max_used_size max_used absolute 1 1024
 DIMENSION shmem_free_size free absolute 1 1024
 
-CHART opensips.shmem_fragments '' "OpenSIPS Shared Memory Fragmentation" "fragments" mem '' line $((opensips_priority + 19)) $opensips_update_every
+CHART opensips.shmem_fragments '' "OpenSIPS Shared Memory Fragmentation" "fragments" mem '' line $((opensips_priority + 19)) $opensips_update_every '' '' 'opensips'
 DIMENSION shmem_fragments fragments absolute 1 1
 EOF
 
@@ -147,7 +147,7 @@ EOF
 
 opensips_update() {
   # the first argument to this function is the microseconds since last update
-  # pass this parameter to the BEGIN statement (see bellow).
+  # pass this parameter to the BEGIN statement (see below).
 
   # do all the work to collect / calculate the values
   # for each dimension
@@ -158,7 +158,7 @@ opensips_update() {
   #    local opensips_client_http_ then one or more of these a-z 0-9 _ then = and one of more of 0-9
   #    local opensips_server_all_ then one or more of these a-z 0-9 _ then = and one of more of 0-9
   # 4. then execute this as a script with the eval
-  #    be very carefull with eval:
+  #    be very careful with eval:
   #    prepare the script and always grep at the end the lines that are useful, so that
   #    even if something goes wrong, no other code can be executed
 
diff --git a/collectors/charts.d.plugin/sensors/README.md b/collectors/charts.d.plugin/sensors/README.md
index cee3f601c..2a1cdb676 100644
--- a/collectors/charts.d.plugin/sensors/README.md
+++ b/collectors/charts.d.plugin/sensors/README.md
@@ -19,20 +19,37 @@ The plugin will provide charts for all configured system sensors
 
 The plugin will create Netdata charts for:
 
-1.  **Temperature**
-2.  **Voltage**
-3.  **Current**
-4.  **Power**
-5.  **Fans Speed**
-6.  **Energy**
-7.  **Humidity**
+1. **Temperature**
+2. **Voltage**
+3. **Current**
+4. **Power**
+5. **Fans Speed**
+6. **Energy**
+7. **Humidity**
 
 One chart for every sensor chip found and each of the above will be created.
 
+## Enable the collector
+
+The `sensors` collector is disabled by default. To enable it, edit the `charts.d.conf` file using `edit-config` from the
+Netdata [config directory](/docs/configure/nodes.md), which is typically at `/etc/netdata`.
+
+```bash
+cd /etc/netdata   # Replace this path with your Netdata config directory, if different
+sudo ./edit-config charts.d.conf
+```
+
+It also needs to be set to "force" to be enabled:
+
+```shell
+# example=force
+sensors=force
+```
+
 ## Configuration
 
-Edit the `charts.d/sensors.conf` configuration file using `edit-config` from the Netdata [config
-directory](/docs/configure/nodes.md), which is typically at `/etc/netdata`.
+Edit the `charts.d/sensors.conf` configuration file using `edit-config` from the
+Netdata [config directory](/docs/configure/nodes.md), which is typically at `/etc/netdata`.
 
 ```bash
 cd /etc/netdata   # Replace this path with your Netdata config directory, if different
diff --git a/collectors/charts.d.plugin/sensors/sensors.chart.sh b/collectors/charts.d.plugin/sensors/sensors.chart.sh
index b92187772..bff381f1c 100644
--- a/collectors/charts.d.plugin/sensors/sensors.chart.sh
+++ b/collectors/charts.d.plugin/sensors/sensors.chart.sh
@@ -143,7 +143,7 @@ sensors_create() {
 				files="$(sensors_check_files "$files")"
 				files="$(sensors_check_temp_type "$files")"
 				[ -z "$files" ] && continue
-				echo "CHART sensors.temp_$id '' '$name Temperature' 'Celsius' 'temperature' 'sensors.temp' line $((sensors_priority + 1)) $sensors_update_every"
+				echo "CHART sensors.temp_$id '' '$name Temperature' 'Celsius' 'temperature' 'sensors.temp' line $((sensors_priority + 1)) $sensors_update_every '' '' 'sensors'"
 				echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.temp_$id \$1\""
 				divisor=1000
 				;;
@@ -152,7 +152,7 @@ sensors_create() {
 				files="$(ls "$path"/in*_input 2>/dev/null)"
 				files="$(sensors_check_files "$files")"
 				[ -z "$files" ] && continue
-				echo "CHART sensors.volt_$id '' '$name Voltage' 'Volts' 'voltage' 'sensors.volt' line $((sensors_priority + 2)) $sensors_update_every"
+				echo "CHART sensors.volt_$id '' '$name Voltage' 'Volts' 'voltage' 'sensors.volt' line $((sensors_priority + 2)) $sensors_update_every '' '' 'sensors'"
 				echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.volt_$id \$1\""
 				divisor=1000
 				;;
@@ -161,7 +161,7 @@ sensors_create() {
 				files="$(ls "$path"/curr*_input 2>/dev/null)"
 				files="$(sensors_check_files "$files")"
 				[ -z "$files" ] && continue
-				echo "CHART sensors.curr_$id '' '$name Current' 'Ampere' 'current' 'sensors.curr' line $((sensors_priority + 3)) $sensors_update_every"
+				echo "CHART sensors.curr_$id '' '$name Current' 'Ampere' 'current' 'sensors.curr' line $((sensors_priority + 3)) $sensors_update_every '' '' 'sensors'"
 				echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.curr_$id \$1\""
 				divisor=1000
 				;;
@@ -170,7 +170,7 @@ sensors_create() {
 				files="$(ls "$path"/power*_input 2>/dev/null)"
 				files="$(sensors_check_files "$files")"
 				[ -z "$files" ] && continue
-				echo "CHART sensors.power_$id '' '$name Power' 'Watt' 'power' 'sensors.power' line $((sensors_priority + 4)) $sensors_update_every"
+				echo "CHART sensors.power_$id '' '$name Power' 'Watt' 'power' 'sensors.power' line $((sensors_priority + 4)) $sensors_update_every '' '' 'sensors'"
 				echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.power_$id \$1\""
 				divisor=1000000
 				;;
@@ -179,7 +179,7 @@ sensors_create() {
 				files="$(ls "$path"/fan*_input 2>/dev/null)"
 				files="$(sensors_check_files "$files")"
 				[ -z "$files" ] && continue
-				echo "CHART sensors.fan_$id '' '$name Fans Speed' 'Rotations / Minute' 'fans' 'sensors.fans' line $((sensors_priority + 5)) $sensors_update_every"
+				echo "CHART sensors.fan_$id '' '$name Fans Speed' 'Rotations / Minute' 'fans' 'sensors.fans' line $((sensors_priority + 5)) $sensors_update_every '' '' 'sensors'"
 				echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.fan_$id \$1\""
 				;;
 
@@ -187,7 +187,7 @@ sensors_create() {
 				files="$(ls "$path"/energy*_input 2>/dev/null)"
 				files="$(sensors_check_files "$files")"
 				[ -z "$files" ] && continue
-				echo "CHART sensors.energy_$id '' '$name Energy' 'Joule' 'energy' 'sensors.energy' areastack $((sensors_priority + 6)) $sensors_update_every"
+				echo "CHART sensors.energy_$id '' '$name Energy' 'Joule' 'energy' 'sensors.energy' areastack $((sensors_priority + 6)) $sensors_update_every '' '' 'sensors'"
 				echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.energy_$id \$1\""
 				algorithm="incremental"
 				divisor=1000000
@@ -197,7 +197,7 @@ sensors_create() {
 				files="$(ls "$path"/humidity*_input 2>/dev/null)"
 				files="$(sensors_check_files "$files")"
 				[ -z "$files" ] && continue
-				echo "CHART sensors.humidity_$id '' '$name Humidity' 'Percent' 'humidity' 'sensors.humidity' line $((sensors_priority + 7)) $sensors_update_every"
+				echo "CHART sensors.humidity_$id '' '$name Humidity' 'Percent' 'humidity' 'sensors.humidity' line $((sensors_priority + 7)) $sensors_update_every '' '' 'sensors'"
 				echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.humidity_$id \$1\""
 				divisor=1000
 				;;
@@ -237,7 +237,7 @@ sensors_create() {
 # _update is called continuously, to collect the values
 sensors_update() {
 	# the first argument to this function is the microseconds since last update
-	# pass this parameter to the BEGIN statement (see bellow).
+	# pass this parameter to the BEGIN statement (see below).
 
 	# do all the work to collect / calculate the values
 	# for each dimension