diff options
Diffstat (limited to 'collectors/python.d.plugin/am2320/README.md')
| -rw-r--r-- | collectors/python.d.plugin/am2320/README.md | 31 |
1 files changed, 24 insertions, 7 deletions
diff --git a/collectors/python.d.plugin/am2320/README.md b/collectors/python.d.plugin/am2320/README.md index 709575221..14ddaa735 100644 --- a/collectors/python.d.plugin/am2320/README.md +++ b/collectors/python.d.plugin/am2320/README.md @@ -1,7 +1,14 @@ -# AM2320 -This module will display a graph of the temperture and humity from a AM2320 sensor. +<!-- +title: "AM2320 sensor monitoring with netdata" +custom_edit_url: https://github.com/netdata/netdata/edit/master/collectors/python.d.plugin/am2320/README.md +sidebar_label: "AM2320" +--> -**Requirements:** +# AM2320 sensor monitoring with netdata + +Displays a graph of the temperature and humidity from a AM2320 sensor. + +## Requirements - Adafruit Circuit Python AM2320 library - Adafruit AM2320 I2C sensor - Python 3 (Adafruit libraries are not Python 2.x compatible) @@ -11,12 +18,20 @@ It produces the following charts: 1. **Temperature** 2. **Humidity** -## configuration +## Configuration + +Edit the `python.d/am2320.conf` configuration file using `edit-config` from the Netdata [config +directory](/docs/configure/nodes.md), which is typically at `/etc/netdata`. -Raspbery Pi Instructions: +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/am2320.conf +``` + +Raspberry Pi Instructions: Hardware install: -Connect the am2320 to the Raspbery Pi I2C pins +Connect the am2320 to the Raspberry Pi I2C pins Raspberry Pi 3B/4 Pins: @@ -25,7 +40,7 @@ Raspberry Pi 3B/4 Pins: - Board GND (pin 6) to sensor GND (pin 3) - Board SCL (pin 5) to sensor SCL (pin 4) -You may also need to add two I2C pullup resistors if your board does not already have them. The Raspberry Pi does have internal pullup resistors but it doesnt hurt to add them anyway. You can use 2.2K - 10K but we will just use 10K. The resistors go from VDD to SCL and SDA each. +You may also need to add two I2C pullup resistors if your board does not already have them. The Raspberry Pi does have internal pullup resistors but it doesn't hurt to add them anyway. You can use 2.2K - 10K but we will just use 10K. The resistors go from VDD to SCL and SDA each. Software install: - `sudo pip3 install adafruit-circuitpython-am2320` @@ -35,3 +50,5 @@ Software install: - save the file. - restart the netdata service. - check the dashboard. + +[]() |