diff options
Diffstat (limited to 'collectors/python.d.plugin/samba')
| -rw-r--r-- | collectors/python.d.plugin/samba/Makefile.inc | 13 | ||||
| -rw-r--r-- | collectors/python.d.plugin/samba/README.md | 67 | ||||
| -rw-r--r-- | collectors/python.d.plugin/samba/samba.chart.py | 138 | ||||
| -rw-r--r-- | collectors/python.d.plugin/samba/samba.conf | 62 |
4 files changed, 280 insertions, 0 deletions
diff --git a/collectors/python.d.plugin/samba/Makefile.inc b/collectors/python.d.plugin/samba/Makefile.inc new file mode 100644 index 000000000..230a8ba43 --- /dev/null +++ b/collectors/python.d.plugin/samba/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_python_DATA += samba/samba.chart.py +dist_pythonconfig_DATA += samba/samba.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += samba/README.md samba/Makefile.inc + diff --git a/collectors/python.d.plugin/samba/README.md b/collectors/python.d.plugin/samba/README.md new file mode 100644 index 000000000..44610d373 --- /dev/null +++ b/collectors/python.d.plugin/samba/README.md @@ -0,0 +1,67 @@ +# samba + +Performance metrics of Samba file sharing. + +**Requirements:** +* `smbstatus` program +* `sudo` program +* `smbd` must be compiled with profiling enabled +* `smbd` must be started either with the `-P 1` option or inside `smb.conf` using `smbd profiling level` +* `netdata` user needs to be able to sudo the `smbstatus` program without password + +It produces the following charts: + +1. **Syscall R/Ws** in kilobytes/s + * sendfile + * recvfle + +2. **Smb2 R/Ws** in kilobytes/s + * readout + * writein + * readin + * writeout + +3. **Smb2 Create/Close** in operations/s + * create + * close + +4. **Smb2 Info** in operations/s + * getinfo + * setinfo + +5. **Smb2 Find** in operations/s + * find + +6. **Smb2 Notify** in operations/s + * notify + +7. **Smb2 Lesser Ops** as counters + * tcon + * negprot + * tdis + * cancel + * logoff + * flush + * lock + * keepalive + * break + * sessetup + +### prerequisite +This module uses `smbstatus` which can only be executed by root. It uses +`sudo` and assumes that it is configured such that the `netdata` user can +execute `smbstatus` as root without password. + +Add to `sudoers`: + + netdata ALL=(root) NOPASSWD: /path/to/smbstatus + +### configuration + + **samba** is disabled by default. Should be explicitly enabled in `python.d.conf`. + +```yaml +samba: yes +``` + +--- diff --git a/collectors/python.d.plugin/samba/samba.chart.py b/collectors/python.d.plugin/samba/samba.chart.py new file mode 100644 index 000000000..b2278de9e --- /dev/null +++ b/collectors/python.d.plugin/samba/samba.chart.py @@ -0,0 +1,138 @@ +# -*- coding: utf-8 -*- +# Description: samba netdata python.d module +# Author: Christopher Cox <chris_cox@endlessnow.com> +# SPDX-License-Identifier: GPL-3.0-or-later +# +# The netdata user needs to be able to be able to sudo the smbstatus program +# without password: +# netdata ALL=(ALL) NOPASSWD: /usr/bin/smbstatus -P +# +# This makes calls to smbstatus -P +# +# This just looks at a couple of values out of syscall, and some from smb2. +# +# The Lesser Ops chart is merely a display of current counter values. They +# didn't seem to change much to me. However, if you notice something changing +# a lot there, bring one or more out into its own chart and make it incremental +# (like find and notify... good examples). + +import re + +from bases.collection import find_binary +from bases.FrameworkServices.ExecutableService import ExecutableService + + +disabled_by_default = True + +# default module values (can be overridden per job in `config`) +update_every = 5 +priority = 60000 +retries = 60 + +ORDER = [ + 'syscall_rw', + 'smb2_rw', + 'smb2_create_close', + 'smb2_info', + 'smb2_find', + 'smb2_notify', + 'smb2_sm_count' +] + +CHARTS = { + 'syscall_rw': { + 'options': [None, 'R/Ws', 'kilobytes/s', 'syscall', 'syscall.rw', 'area'], + 'lines': [ + ['syscall_sendfile_bytes', 'sendfile', 'incremental', 1, 1024], + ['syscall_recvfile_bytes', 'recvfile', 'incremental', -1, 1024] + ] + }, + 'smb2_rw': { + 'options': [None, 'R/Ws', 'kilobytes/s', 'smb2', 'smb2.rw', 'area'], + 'lines': [ + ['smb2_read_outbytes', 'readout', 'incremental', 1, 1024], + ['smb2_write_inbytes', 'writein', 'incremental', -1, 1024], + ['smb2_read_inbytes', 'readin', 'incremental', 1, 1024], + ['smb2_write_outbytes', 'writeout', 'incremental', -1, 1024] + ] + }, + 'smb2_create_close': { + 'options': [None, 'Create/Close', 'operations/s', 'smb2', 'smb2.create_close', 'line'], + 'lines': [ + ['smb2_create_count', 'create', 'incremental', 1, 1], + ['smb2_close_count', 'close', 'incremental', -1, 1] + ] + }, + 'smb2_info': { + 'options': [None, 'Info', 'operations/s', 'smb2', 'smb2.get_set_info', 'line'], + 'lines': [ + ['smb2_getinfo_count', 'getinfo', 'incremental', 1, 1], + ['smb2_setinfo_count', 'setinfo', 'incremental', -1, 1] + ] + }, + 'smb2_find': { + 'options': [None, 'Find', 'operations/s', 'smb2', 'smb2.find', 'line'], + 'lines': [ + ['smb2_find_count', 'find', 'incremental', 1, 1] + ] + }, + 'smb2_notify': { + 'options': [None, 'Notify', 'operations/s', 'smb2', 'smb2.notify', 'line'], + 'lines': [ + ['smb2_notify_count', 'notify', 'incremental', 1, 1] + ] + }, + 'smb2_sm_count': { + 'options': [None, 'Lesser Ops', 'count', 'smb2', 'smb2.sm_counters', 'stacked'], + 'lines': [ + ['smb2_tcon_count', 'tcon', 'absolute', 1, 1], + ['smb2_negprot_count', 'negprot', 'absolute', 1, 1], + ['smb2_tdis_count', 'tdis', 'absolute', 1, 1], + ['smb2_cancel_count', 'cancel', 'absolute', 1, 1], + ['smb2_logoff_count', 'logoff', 'absolute', 1, 1], + ['smb2_flush_count', 'flush', 'absolute', 1, 1], + ['smb2_lock_count', 'lock', 'absolute', 1, 1], + ['smb2_keepalive_count', 'keepalive', 'absolute', 1, 1], + ['smb2_break_count', 'break', 'absolute', 1, 1], + ['smb2_sessetup_count', 'sessetup', 'absolute', 1, 1] + ] + } +} + + +class Service(ExecutableService): + def __init__(self, configuration=None, name=None): + ExecutableService.__init__(self, configuration=configuration, name=name) + self.order = ORDER + self.definitions = CHARTS + self.rgx_smb2 = re.compile(r'(smb2_[^:]+|syscall_.*file_bytes):\s+(\d+)') + + def check(self): + sudo_binary, smbstatus_binary = find_binary('sudo'), find_binary('smbstatus') + + if not (sudo_binary and smbstatus_binary): + self.error("Can\'t locate 'sudo' or 'smbstatus' binary") + return False + + self.command = [sudo_binary, '-v'] + err = self._get_raw_data(stderr=True) + if err: + self.error(''.join(err)) + return False + + self.command = ' '.join([sudo_binary, '-n', smbstatus_binary, '-P']) + + return ExecutableService.check(self) + + def _get_data(self): + """ + Format data received from shell command + :return: dict + """ + raw_data = self._get_raw_data() + if not raw_data: + return None + + parsed = self.rgx_smb2.findall(' '.join(raw_data)) + + return dict(parsed) or None diff --git a/collectors/python.d.plugin/samba/samba.conf b/collectors/python.d.plugin/samba/samba.conf new file mode 100644 index 000000000..ee513c60f --- /dev/null +++ b/collectors/python.d.plugin/samba/samba.conf @@ -0,0 +1,62 @@ +# netdata python.d.plugin configuration for samba +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +update_every: 5 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds
\ No newline at end of file |