diff options
Diffstat (limited to 'collectors/python.d.plugin/smartd_log/README.md')
| -rw-r--r-- | collectors/python.d.plugin/smartd_log/README.md | 52 |
1 files changed, 28 insertions, 24 deletions
diff --git a/collectors/python.d.plugin/smartd_log/README.md b/collectors/python.d.plugin/smartd_log/README.md index f6584be70..6f4dda50c 100644 --- a/collectors/python.d.plugin/smartd_log/README.md +++ b/collectors/python.d.plugin/smartd_log/README.md @@ -3,43 +3,44 @@ Module monitor `smartd` log files to collect HDD/SSD S.M.A.R.T attributes. **Requirements:** -* `smartmontools` -It produces following charts for SCSI devices: +- `smartmontools` -1. **Read Error Corrected** +It produces following charts for SCSI devices: -2. **Read Error Uncorrected** +1. **Read Error Corrected** -3. **Write Error Corrected** +2. **Read Error Uncorrected** -4. **Write Error Uncorrected** +3. **Write Error Corrected** -5. **Verify Error Corrected** +4. **Write Error Uncorrected** -6. **Verify Error Uncorrected** +5. **Verify Error Corrected** -7. **Temperature** +6. **Verify Error Uncorrected** +7. **Temperature** For ATA devices: -1. **Read Error Rate** -2. **Seek Error Rate** +1. **Read Error Rate** + +2. **Seek Error Rate** -3. **Soft Read Error Rate** +3. **Soft Read Error Rate** -4. **Write Error Rate** +4. **Write Error Rate** -5. **SATA Interface Downshift** +5. **SATA Interface Downshift** -6. **UDMA CRC Error Count** +6. **UDMA CRC Error Count** -7. **Throughput Performance** +7. **Throughput Performance** -8. **Seek Time Performance** +8. **Seek Time Performance** -9. **Start/Stop Count** +9. **Start/Stop Count** 10. **Power-On Hours Count** @@ -75,25 +76,28 @@ For ATA devices: 26. **Percent Lifetime Used** -### prerequisite +## prerequisite + `smartd` must be running with `-A` option to write smartd attribute information to files. For this you need to set `smartd_opts` (or `SMARTD_ARGS`, check _smartd.service_ content) in `/etc/default/smartmontools`: - ``` # dump smartd attrs info every 600 seconds smartd_opts="-A /var/log/smartd/ -i 600" ``` + You may need to create the smartd directory before smartd will write to it: -``` + +```sh mkdir -p /var/log/smartd ``` -Otherwise, all the smartd `.csv` files may get written to `/var/lib/smartmontools` (default location). See also [https://linux.die.net/man/8/smartd](https://linux.die.net/man/8/smartd) for more info on the `-A --attributelog=PREFIX` command. + +Otherwise, all the smartd `.csv` files may get written to `/var/lib/smartmontools` (default location). See also <https://linux.die.net/man/8/smartd> for more info on the `-A --attributelog=PREFIX` command. `smartd` appends logs at every run. It's strongly recommended to use `logrotate` for smartd files. -### configuration +## configuration ```yaml local: @@ -104,4 +108,4 @@ If no configuration is given, module will attempt to read log files in `/var/log --- -[]() +[](<>) |