diff options
Diffstat (limited to '')
74 files changed, 5216 insertions, 1885 deletions
diff --git a/collectors/python.d.plugin/Makefile.in b/collectors/python.d.plugin/Makefile.in new file mode 100644 index 000000000..d39e4a052 --- /dev/null +++ b/collectors/python.d.plugin/Makefile.in @@ -0,0 +1,2063 @@ +# Makefile.in generated by automake 1.15.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2017 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# SPDX-License-Identifier: GPL-3.0-or-later + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = collectors/python.d.plugin +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \ + $(top_srcdir)/build/m4/ax_c__generic.m4 \ + $(top_srcdir)/build/m4/ax_c_lto.m4 \ + $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \ + $(top_srcdir)/build/m4/ax_c_mallopt.m4 \ + $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \ + $(top_srcdir)/build/m4/ax_pthread.m4 \ + $(top_srcdir)/build/m4/jemalloc.m4 \ + $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(dist_plugins_SCRIPTS) \ + $(dist_python_SCRIPTS) $(dist_bases_DATA) \ + $(dist_bases_framework_services_DATA) $(dist_libconfig_DATA) \ + $(dist_noinst_DATA) $(dist_python_DATA) \ + $(dist_python_urllib3_DATA) \ + $(dist_python_urllib3_backports_DATA) \ + $(dist_python_urllib3_contrib_DATA) \ + $(dist_python_urllib3_packages_DATA) \ + $(dist_python_urllib3_securetransport_DATA) \ + $(dist_python_urllib3_ssl_match_hostname_DATA) \ + $(dist_python_urllib3_util_DATA) $(dist_pythonconfig_DATA) \ + $(dist_pythonmodules_DATA) $(dist_pythonyaml2_DATA) \ + $(dist_pythonyaml3_DATA) $(dist_third_party_DATA) \ + $(dist_userpythonconfig_DATA) $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(pythondir)" \ + "$(DESTDIR)$(basesdir)" \ + "$(DESTDIR)$(bases_framework_servicesdir)" \ + "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(pythondir)" \ + "$(DESTDIR)$(python_urllib3dir)" \ + "$(DESTDIR)$(python_urllib3_backportsdir)" \ + "$(DESTDIR)$(python_urllib3_contribdir)" \ + "$(DESTDIR)$(python_urllib3_packagesdir)" \ + "$(DESTDIR)$(python_urllib3_securetransportdir)" \ + "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" \ + "$(DESTDIR)$(python_urllib3_utildir)" \ + "$(DESTDIR)$(pythonconfigdir)" "$(DESTDIR)$(pythonmodulesdir)" \ + "$(DESTDIR)$(pythonyaml2dir)" "$(DESTDIR)$(pythonyaml3dir)" \ + "$(DESTDIR)$(third_partydir)" \ + "$(DESTDIR)$(userpythonconfigdir)" +SCRIPTS = $(dist_plugins_SCRIPTS) $(dist_python_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +DATA = $(dist_bases_DATA) $(dist_bases_framework_services_DATA) \ + $(dist_libconfig_DATA) $(dist_noinst_DATA) $(dist_python_DATA) \ + $(dist_python_urllib3_DATA) \ + $(dist_python_urllib3_backports_DATA) \ + $(dist_python_urllib3_contrib_DATA) \ + $(dist_python_urllib3_packages_DATA) \ + $(dist_python_urllib3_securetransport_DATA) \ + $(dist_python_urllib3_ssl_match_hostname_DATA) \ + $(dist_python_urllib3_util_DATA) $(dist_pythonconfig_DATA) \ + $(dist_pythonmodules_DATA) $(dist_pythonyaml2_DATA) \ + $(dist_pythonyaml3_DATA) $(dist_third_party_DATA) \ + $(dist_userpythonconfig_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in \ + $(srcdir)/adaptec_raid/Makefile.inc \ + $(srcdir)/apache/Makefile.inc $(srcdir)/beanstalk/Makefile.inc \ + $(srcdir)/bind_rndc/Makefile.inc $(srcdir)/boinc/Makefile.inc \ + $(srcdir)/ceph/Makefile.inc $(srcdir)/chrony/Makefile.inc \ + $(srcdir)/couchdb/Makefile.inc \ + $(srcdir)/dns_query_time/Makefile.inc \ + $(srcdir)/dnsdist/Makefile.inc $(srcdir)/dockerd/Makefile.inc \ + $(srcdir)/dovecot/Makefile.inc \ + $(srcdir)/elasticsearch/Makefile.inc \ + $(srcdir)/energid/Makefile.inc $(srcdir)/example/Makefile.inc \ + $(srcdir)/exim/Makefile.inc $(srcdir)/fail2ban/Makefile.inc \ + $(srcdir)/freeradius/Makefile.inc \ + $(srcdir)/go_expvar/Makefile.inc \ + $(srcdir)/haproxy/Makefile.inc $(srcdir)/hddtemp/Makefile.inc \ + $(srcdir)/httpcheck/Makefile.inc \ + $(srcdir)/icecast/Makefile.inc $(srcdir)/ipfs/Makefile.inc \ + $(srcdir)/isc_dhcpd/Makefile.inc \ + $(srcdir)/litespeed/Makefile.inc $(srcdir)/logind/Makefile.inc \ + $(srcdir)/megacli/Makefile.inc \ + $(srcdir)/memcached/Makefile.inc \ + $(srcdir)/mongodb/Makefile.inc $(srcdir)/monit/Makefile.inc \ + $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc \ + $(srcdir)/nginx_plus/Makefile.inc $(srcdir)/nsd/Makefile.inc \ + $(srcdir)/ntpd/Makefile.inc $(srcdir)/nvidia_smi/Makefile.inc \ + $(srcdir)/openldap/Makefile.inc \ + $(srcdir)/oracledb/Makefile.inc \ + $(srcdir)/ovpn_status_log/Makefile.inc \ + $(srcdir)/phpfpm/Makefile.inc $(srcdir)/portcheck/Makefile.inc \ + $(srcdir)/postfix/Makefile.inc $(srcdir)/postgres/Makefile.inc \ + $(srcdir)/powerdns/Makefile.inc \ + $(srcdir)/proxysql/Makefile.inc $(srcdir)/puppet/Makefile.inc \ + $(srcdir)/rabbitmq/Makefile.inc $(srcdir)/redis/Makefile.inc \ + $(srcdir)/rethinkdbs/Makefile.inc \ + $(srcdir)/retroshare/Makefile.inc \ + $(srcdir)/riakkv/Makefile.inc $(srcdir)/samba/Makefile.inc \ + $(srcdir)/sensors/Makefile.inc \ + $(srcdir)/smartd_log/Makefile.inc \ + $(srcdir)/spigotmc/Makefile.inc \ + $(srcdir)/springboot/Makefile.inc $(srcdir)/squid/Makefile.inc \ + $(srcdir)/tomcat/Makefile.inc $(srcdir)/tor/Makefile.inc \ + $(srcdir)/traefik/Makefile.inc $(srcdir)/unbound/Makefile.inc \ + $(srcdir)/uwsgi/Makefile.inc $(srcdir)/varnish/Makefile.inc \ + $(srcdir)/w1sensor/Makefile.inc $(srcdir)/web_log/Makefile.inc \ + $(top_srcdir)/build/subst.inc +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CUPSCONFIG = @CUPSCONFIG@ +CXX = @CXX@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CXX_BINARY = @CXX_BINARY@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@ +IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@ +JSON_CFLAGS = @JSON_CFLAGS@ +JSON_LIBS = @JSON_LIBS@ +LDFLAGS = @LDFLAGS@ +LIBCAP_CFLAGS = @LIBCAP_CFLAGS@ +LIBCAP_LIBS = @LIBCAP_LIBS@ +LIBCRYPTO_CFLAGS = @LIBCRYPTO_CFLAGS@ +LIBCRYPTO_LIBS = @LIBCRYPTO_LIBS@ +LIBCURL_CFLAGS = @LIBCURL_CFLAGS@ +LIBCURL_LIBS = @LIBCURL_LIBS@ +LIBMNL_CFLAGS = @LIBMNL_CFLAGS@ +LIBMNL_LIBS = @LIBMNL_LIBS@ +LIBMONGOC_CFLAGS = @LIBMONGOC_CFLAGS@ +LIBMONGOC_LIBS = @LIBMONGOC_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBSSL_CFLAGS = @LIBSSL_CFLAGS@ +LIBSSL_LIBS = @LIBSSL_LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MATH_CFLAGS = @MATH_CFLAGS@ +MATH_LIBS = @MATH_LIBS@ +MKDIR_P = @MKDIR_P@ +NFACCT_CFLAGS = @NFACCT_CFLAGS@ +NFACCT_LIBS = @NFACCT_LIBS@ +OBJEXT = @OBJEXT@ +OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@ +OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@ +OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@ +OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@ +OPTIONAL_JSONC_LIBS = @OPTIONAL_JSONC_LIBS@ +OPTIONAL_JUDY_LIBS = @OPTIONAL_JUDY_LIBS@ +OPTIONAL_KINESIS_CFLAGS = @OPTIONAL_KINESIS_CFLAGS@ +OPTIONAL_KINESIS_LIBS = @OPTIONAL_KINESIS_LIBS@ +OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@ +OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@ +OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@ +OPTIONAL_MATH_CFLAGS = @OPTIONAL_MATH_CFLAGS@ +OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@ +OPTIONAL_MONGOC_CFLAGS = @OPTIONAL_MONGOC_CFLAGS@ +OPTIONAL_MONGOC_LIBS = @OPTIONAL_MONGOC_LIBS@ +OPTIONAL_NFACCT_CFLAGS = @OPTIONAL_NFACCT_CFLAGS@ +OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@ +OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS@ +OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS@ +OPTIONAL_SSL_LIBS = @OPTIONAL_SSL_LIBS@ +OPTIONAL_UUID_CFLAGS = @OPTIONAL_UUID_CFLAGS@ +OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@ +OPTIONAL_UV_LIBS = @OPTIONAL_UV_LIBS@ +OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@ +OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@ +OPTIONAL_ZLIB_CFLAGS = @OPTIONAL_ZLIB_CFLAGS@ +OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PROTOBUF_CFLAGS = @PROTOBUF_CFLAGS@ +PROTOBUF_LIBS = @PROTOBUF_LIBS@ +PROTOC = @PROTOC@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSE_CANDIDATE = @SSE_CANDIDATE@ +STRIP = @STRIP@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VERSION = @VERSION@ +XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@ +XENLIGHT_LIBS = @XENLIGHT_LIBS@ +YAJL_CFLAGS = @YAJL_CFLAGS@ +YAJL_LIBS = @YAJL_LIBS@ +ZLIB_CFLAGS = @ZLIB_CFLAGS@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_target = @build_target@ +build_vendor = @build_vendor@ +builddir = @builddir@ +cachedir = @cachedir@ +chartsdir = @chartsdir@ +configdir = @configdir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +has_jemalloc = @has_jemalloc@ +has_tcmalloc = @has_tcmalloc@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libconfigdir = @libconfigdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logdir = @logdir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nodedir = @nodedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pluginsdir = @pluginsdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +pythondir = @pythondir@ +registrydir = @registrydir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +varlibdir = @varlibdir@ +webdir = @webdir@ +MAINTAINERCLEANFILES = $(srcdir)/Makefile.in +CLEANFILES = \ + python.d.plugin \ + $(NULL) + +SUFFIXES = .in +dist_libconfig_DATA = \ + python.d.conf \ + $(NULL) + +dist_plugins_SCRIPTS = \ + python.d.plugin \ + $(NULL) + + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution +dist_noinst_DATA = python.d.plugin.in README.md $(NULL) \ + adaptec_raid/README.md adaptec_raid/Makefile.inc \ + apache/README.md apache/Makefile.inc beanstalk/README.md \ + beanstalk/Makefile.inc bind_rndc/README.md \ + bind_rndc/Makefile.inc boinc/README.md boinc/Makefile.inc \ + ceph/README.md ceph/Makefile.inc chrony/README.md \ + chrony/Makefile.inc couchdb/README.md couchdb/Makefile.inc \ + dnsdist/README.md dnsdist/Makefile.inc \ + dns_query_time/README.md dns_query_time/Makefile.inc \ + dockerd/README.md dockerd/Makefile.inc dovecot/README.md \ + dovecot/Makefile.inc elasticsearch/README.md \ + elasticsearch/Makefile.inc energid/README.md \ + energid/Makefile.inc example/README.md example/Makefile.inc \ + exim/README.md exim/Makefile.inc fail2ban/README.md \ + fail2ban/Makefile.inc freeradius/README.md \ + freeradius/Makefile.inc go_expvar/README.md \ + go_expvar/Makefile.inc haproxy/README.md haproxy/Makefile.inc \ + hddtemp/README.md hddtemp/Makefile.inc httpcheck/README.md \ + httpcheck/Makefile.inc icecast/README.md icecast/Makefile.inc \ + ipfs/README.md ipfs/Makefile.inc isc_dhcpd/README.md \ + isc_dhcpd/Makefile.inc litespeed/README.md \ + litespeed/Makefile.inc logind/README.md logind/Makefile.inc \ + megacli/README.md megacli/Makefile.inc memcached/README.md \ + memcached/Makefile.inc mongodb/README.md mongodb/Makefile.inc \ + monit/README.md monit/Makefile.inc mysql/README.md \ + mysql/Makefile.inc nginx/README.md nginx/Makefile.inc \ + nginx_plus/README.md nginx_plus/Makefile.inc \ + nvidia_smi/README.md nvidia_smi/Makefile.inc nsd/README.md \ + nsd/Makefile.inc ntpd/README.md ntpd/Makefile.inc \ + ovpn_status_log/README.md ovpn_status_log/Makefile.inc \ + openldap/README.md openldap/Makefile.inc oracledb/README.md \ + oracledb/Makefile.inc phpfpm/README.md phpfpm/Makefile.inc \ + portcheck/README.md portcheck/Makefile.inc postfix/README.md \ + postfix/Makefile.inc postgres/README.md postgres/Makefile.inc \ + powerdns/README.md powerdns/Makefile.inc proxysql/README.md \ + proxysql/Makefile.inc puppet/README.md puppet/Makefile.inc \ + rabbitmq/README.md rabbitmq/Makefile.inc redis/README.md \ + redis/Makefile.inc rethinkdbs/README.md \ + rethinkdbs/Makefile.inc retroshare/README.md \ + retroshare/Makefile.inc riakkv/README.md riakkv/Makefile.inc \ + samba/README.md samba/Makefile.inc sensors/README.md \ + sensors/Makefile.inc smartd_log/README.md \ + smartd_log/Makefile.inc spigotmc/README.md \ + spigotmc/Makefile.inc springboot/README.md \ + springboot/Makefile.inc squid/README.md squid/Makefile.inc \ + tomcat/README.md tomcat/Makefile.inc tor/README.md \ + tor/Makefile.inc traefik/README.md traefik/Makefile.inc \ + unbound/README.md unbound/Makefile.inc uwsgi/README.md \ + uwsgi/Makefile.inc varnish/README.md varnish/Makefile.inc \ + w1sensor/README.md w1sensor/Makefile.inc web_log/README.md \ + web_log/Makefile.inc +dist_python_SCRIPTS = \ + $(NULL) + + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files +dist_python_DATA = $(NULL) adaptec_raid/adaptec_raid.chart.py \ + apache/apache.chart.py beanstalk/beanstalk.chart.py \ + bind_rndc/bind_rndc.chart.py boinc/boinc.chart.py \ + ceph/ceph.chart.py chrony/chrony.chart.py \ + couchdb/couchdb.chart.py dnsdist/dnsdist.chart.py \ + dns_query_time/dns_query_time.chart.py \ + dockerd/dockerd.chart.py dovecot/dovecot.chart.py \ + elasticsearch/elasticsearch.chart.py energid/energid.chart.py \ + example/example.chart.py exim/exim.chart.py \ + fail2ban/fail2ban.chart.py freeradius/freeradius.chart.py \ + go_expvar/go_expvar.chart.py haproxy/haproxy.chart.py \ + hddtemp/hddtemp.chart.py httpcheck/httpcheck.chart.py \ + icecast/icecast.chart.py ipfs/ipfs.chart.py \ + isc_dhcpd/isc_dhcpd.chart.py litespeed/litespeed.chart.py \ + logind/logind.chart.py megacli/megacli.chart.py \ + memcached/memcached.chart.py mongodb/mongodb.chart.py \ + monit/monit.chart.py mysql/mysql.chart.py nginx/nginx.chart.py \ + nginx_plus/nginx_plus.chart.py nvidia_smi/nvidia_smi.chart.py \ + nsd/nsd.chart.py ntpd/ntpd.chart.py \ + ovpn_status_log/ovpn_status_log.chart.py \ + openldap/openldap.chart.py oracledb/oracledb.chart.py \ + phpfpm/phpfpm.chart.py portcheck/portcheck.chart.py \ + postfix/postfix.chart.py postgres/postgres.chart.py \ + powerdns/powerdns.chart.py proxysql/proxysql.chart.py \ + puppet/puppet.chart.py rabbitmq/rabbitmq.chart.py \ + redis/redis.chart.py rethinkdbs/rethinkdbs.chart.py \ + retroshare/retroshare.chart.py riakkv/riakkv.chart.py \ + samba/samba.chart.py sensors/sensors.chart.py \ + smartd_log/smartd_log.chart.py spigotmc/spigotmc.chart.py \ + springboot/springboot.chart.py squid/squid.chart.py \ + tomcat/tomcat.chart.py tor/tor.chart.py \ + traefik/traefik.chart.py unbound/unbound.chart.py \ + uwsgi/uwsgi.chart.py varnish/varnish.chart.py \ + w1sensor/w1sensor.chart.py web_log/web_log.chart.py +userpythonconfigdir = $(configdir)/python.d +dist_userpythonconfig_DATA = \ + .keep \ + $(NULL) + +pythonconfigdir = $(libconfigdir)/python.d +dist_pythonconfig_DATA = $(NULL) adaptec_raid/adaptec_raid.conf \ + apache/apache.conf beanstalk/beanstalk.conf \ + bind_rndc/bind_rndc.conf boinc/boinc.conf ceph/ceph.conf \ + chrony/chrony.conf couchdb/couchdb.conf dnsdist/dnsdist.conf \ + dns_query_time/dns_query_time.conf dockerd/dockerd.conf \ + dovecot/dovecot.conf elasticsearch/elasticsearch.conf \ + energid/energid.conf example/example.conf exim/exim.conf \ + fail2ban/fail2ban.conf freeradius/freeradius.conf \ + go_expvar/go_expvar.conf haproxy/haproxy.conf \ + hddtemp/hddtemp.conf httpcheck/httpcheck.conf \ + icecast/icecast.conf ipfs/ipfs.conf isc_dhcpd/isc_dhcpd.conf \ + litespeed/litespeed.conf logind/logind.conf \ + megacli/megacli.conf memcached/memcached.conf \ + mongodb/mongodb.conf monit/monit.conf mysql/mysql.conf \ + nginx/nginx.conf nginx_plus/nginx_plus.conf \ + nvidia_smi/nvidia_smi.conf nsd/nsd.conf ntpd/ntpd.conf \ + ovpn_status_log/ovpn_status_log.conf openldap/openldap.conf \ + oracledb/oracledb.conf phpfpm/phpfpm.conf \ + portcheck/portcheck.conf postfix/postfix.conf \ + postgres/postgres.conf powerdns/powerdns.conf \ + proxysql/proxysql.conf puppet/puppet.conf \ + rabbitmq/rabbitmq.conf redis/redis.conf \ + rethinkdbs/rethinkdbs.conf retroshare/retroshare.conf \ + riakkv/riakkv.conf samba/samba.conf sensors/sensors.conf \ + smartd_log/smartd_log.conf spigotmc/spigotmc.conf \ + springboot/springboot.conf squid/squid.conf tomcat/tomcat.conf \ + tor/tor.conf traefik/traefik.conf unbound/unbound.conf \ + uwsgi/uwsgi.conf varnish/varnish.conf w1sensor/w1sensor.conf \ + web_log/web_log.conf +pythonmodulesdir = $(pythondir)/python_modules +dist_pythonmodules_DATA = \ + python_modules/__init__.py \ + $(NULL) + +basesdir = $(pythonmodulesdir)/bases +dist_bases_DATA = \ + python_modules/bases/__init__.py \ + python_modules/bases/charts.py \ + python_modules/bases/collection.py \ + python_modules/bases/loaders.py \ + python_modules/bases/loggers.py \ + $(NULL) + +bases_framework_servicesdir = $(basesdir)/FrameworkServices +dist_bases_framework_services_DATA = \ + python_modules/bases/FrameworkServices/__init__.py \ + python_modules/bases/FrameworkServices/ExecutableService.py \ + python_modules/bases/FrameworkServices/LogService.py \ + python_modules/bases/FrameworkServices/MySQLService.py \ + python_modules/bases/FrameworkServices/SimpleService.py \ + python_modules/bases/FrameworkServices/SocketService.py \ + python_modules/bases/FrameworkServices/UrlService.py \ + $(NULL) + +third_partydir = $(pythonmodulesdir)/third_party +dist_third_party_DATA = \ + python_modules/third_party/__init__.py \ + python_modules/third_party/ordereddict.py \ + python_modules/third_party/lm_sensors.py \ + python_modules/third_party/mcrcon.py \ + python_modules/third_party/boinc_client.py \ + python_modules/third_party/monotonic.py \ + $(NULL) + +pythonyaml2dir = $(pythonmodulesdir)/pyyaml2 +dist_pythonyaml2_DATA = \ + python_modules/pyyaml2/__init__.py \ + python_modules/pyyaml2/composer.py \ + python_modules/pyyaml2/constructor.py \ + python_modules/pyyaml2/cyaml.py \ + python_modules/pyyaml2/dumper.py \ + python_modules/pyyaml2/emitter.py \ + python_modules/pyyaml2/error.py \ + python_modules/pyyaml2/events.py \ + python_modules/pyyaml2/loader.py \ + python_modules/pyyaml2/nodes.py \ + python_modules/pyyaml2/parser.py \ + python_modules/pyyaml2/reader.py \ + python_modules/pyyaml2/representer.py \ + python_modules/pyyaml2/resolver.py \ + python_modules/pyyaml2/scanner.py \ + python_modules/pyyaml2/serializer.py \ + python_modules/pyyaml2/tokens.py \ + $(NULL) + +pythonyaml3dir = $(pythonmodulesdir)/pyyaml3 +dist_pythonyaml3_DATA = \ + python_modules/pyyaml3/__init__.py \ + python_modules/pyyaml3/composer.py \ + python_modules/pyyaml3/constructor.py \ + python_modules/pyyaml3/cyaml.py \ + python_modules/pyyaml3/dumper.py \ + python_modules/pyyaml3/emitter.py \ + python_modules/pyyaml3/error.py \ + python_modules/pyyaml3/events.py \ + python_modules/pyyaml3/loader.py \ + python_modules/pyyaml3/nodes.py \ + python_modules/pyyaml3/parser.py \ + python_modules/pyyaml3/reader.py \ + python_modules/pyyaml3/representer.py \ + python_modules/pyyaml3/resolver.py \ + python_modules/pyyaml3/scanner.py \ + python_modules/pyyaml3/serializer.py \ + python_modules/pyyaml3/tokens.py \ + $(NULL) + +python_urllib3dir = $(pythonmodulesdir)/urllib3 +dist_python_urllib3_DATA = \ + python_modules/urllib3/__init__.py \ + python_modules/urllib3/_collections.py \ + python_modules/urllib3/connection.py \ + python_modules/urllib3/connectionpool.py \ + python_modules/urllib3/exceptions.py \ + python_modules/urllib3/fields.py \ + python_modules/urllib3/filepost.py \ + python_modules/urllib3/response.py \ + python_modules/urllib3/poolmanager.py \ + python_modules/urllib3/request.py \ + $(NULL) + +python_urllib3_utildir = $(python_urllib3dir)/util +dist_python_urllib3_util_DATA = \ + python_modules/urllib3/util/__init__.py \ + python_modules/urllib3/util/connection.py \ + python_modules/urllib3/util/request.py \ + python_modules/urllib3/util/response.py \ + python_modules/urllib3/util/retry.py \ + python_modules/urllib3/util/selectors.py \ + python_modules/urllib3/util/ssl_.py \ + python_modules/urllib3/util/timeout.py \ + python_modules/urllib3/util/url.py \ + python_modules/urllib3/util/wait.py \ + $(NULL) + +python_urllib3_packagesdir = $(python_urllib3dir)/packages +dist_python_urllib3_packages_DATA = \ + python_modules/urllib3/packages/__init__.py \ + python_modules/urllib3/packages/ordered_dict.py \ + python_modules/urllib3/packages/six.py \ + $(NULL) + +python_urllib3_backportsdir = $(python_urllib3_packagesdir)/backports +dist_python_urllib3_backports_DATA = \ + python_modules/urllib3/packages/backports/__init__.py \ + python_modules/urllib3/packages/backports/makefile.py \ + $(NULL) + +python_urllib3_ssl_match_hostnamedir = $(python_urllib3_packagesdir)/ssl_match_hostname +dist_python_urllib3_ssl_match_hostname_DATA = \ + python_modules/urllib3/packages/ssl_match_hostname/__init__.py \ + python_modules/urllib3/packages/ssl_match_hostname/_implementation.py \ + $(NULL) + +python_urllib3_contribdir = $(python_urllib3dir)/contrib +dist_python_urllib3_contrib_DATA = \ + python_modules/urllib3/contrib/__init__.py \ + python_modules/urllib3/contrib/appengine.py \ + python_modules/urllib3/contrib/ntlmpool.py \ + python_modules/urllib3/contrib/pyopenssl.py \ + python_modules/urllib3/contrib/securetransport.py \ + python_modules/urllib3/contrib/socks.py \ + $(NULL) + +python_urllib3_securetransportdir = $(python_urllib3_contribdir)/_securetransport +dist_python_urllib3_securetransport_DATA = \ + python_modules/urllib3/contrib/_securetransport/__init__.py \ + python_modules/urllib3/contrib/_securetransport/bindings.py \ + python_modules/urllib3/contrib/_securetransport/low_level.py \ + $(NULL) + +all: all-am + +.SUFFIXES: +.SUFFIXES: .in +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/adaptec_raid/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/beanstalk/Makefile.inc $(srcdir)/bind_rndc/Makefile.inc $(srcdir)/boinc/Makefile.inc $(srcdir)/ceph/Makefile.inc $(srcdir)/chrony/Makefile.inc $(srcdir)/couchdb/Makefile.inc $(srcdir)/dnsdist/Makefile.inc $(srcdir)/dns_query_time/Makefile.inc $(srcdir)/dockerd/Makefile.inc $(srcdir)/dovecot/Makefile.inc $(srcdir)/elasticsearch/Makefile.inc $(srcdir)/energid/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/fail2ban/Makefile.inc $(srcdir)/freeradius/Makefile.inc $(srcdir)/go_expvar/Makefile.inc $(srcdir)/haproxy/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/httpcheck/Makefile.inc $(srcdir)/icecast/Makefile.inc $(srcdir)/ipfs/Makefile.inc $(srcdir)/isc_dhcpd/Makefile.inc $(srcdir)/litespeed/Makefile.inc $(srcdir)/logind/Makefile.inc $(srcdir)/megacli/Makefile.inc $(srcdir)/memcached/Makefile.inc $(srcdir)/mongodb/Makefile.inc $(srcdir)/monit/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nginx_plus/Makefile.inc $(srcdir)/nvidia_smi/Makefile.inc $(srcdir)/nsd/Makefile.inc $(srcdir)/ntpd/Makefile.inc $(srcdir)/ovpn_status_log/Makefile.inc $(srcdir)/openldap/Makefile.inc $(srcdir)/oracledb/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/portcheck/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/postgres/Makefile.inc $(srcdir)/powerdns/Makefile.inc $(srcdir)/proxysql/Makefile.inc $(srcdir)/puppet/Makefile.inc $(srcdir)/rabbitmq/Makefile.inc $(srcdir)/redis/Makefile.inc $(srcdir)/rethinkdbs/Makefile.inc $(srcdir)/retroshare/Makefile.inc $(srcdir)/riakkv/Makefile.inc $(srcdir)/samba/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/smartd_log/Makefile.inc $(srcdir)/spigotmc/Makefile.inc $(srcdir)/springboot/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(srcdir)/tor/Makefile.inc $(srcdir)/traefik/Makefile.inc $(srcdir)/unbound/Makefile.inc $(srcdir)/uwsgi/Makefile.inc $(srcdir)/varnish/Makefile.inc $(srcdir)/w1sensor/Makefile.inc $(srcdir)/web_log/Makefile.inc $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu collectors/python.d.plugin/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu collectors/python.d.plugin/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/build/subst.inc $(srcdir)/adaptec_raid/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/beanstalk/Makefile.inc $(srcdir)/bind_rndc/Makefile.inc $(srcdir)/boinc/Makefile.inc $(srcdir)/ceph/Makefile.inc $(srcdir)/chrony/Makefile.inc $(srcdir)/couchdb/Makefile.inc $(srcdir)/dnsdist/Makefile.inc $(srcdir)/dns_query_time/Makefile.inc $(srcdir)/dockerd/Makefile.inc $(srcdir)/dovecot/Makefile.inc $(srcdir)/elasticsearch/Makefile.inc $(srcdir)/energid/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/fail2ban/Makefile.inc $(srcdir)/freeradius/Makefile.inc $(srcdir)/go_expvar/Makefile.inc $(srcdir)/haproxy/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/httpcheck/Makefile.inc $(srcdir)/icecast/Makefile.inc $(srcdir)/ipfs/Makefile.inc $(srcdir)/isc_dhcpd/Makefile.inc $(srcdir)/litespeed/Makefile.inc $(srcdir)/logind/Makefile.inc $(srcdir)/megacli/Makefile.inc $(srcdir)/memcached/Makefile.inc $(srcdir)/mongodb/Makefile.inc $(srcdir)/monit/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nginx_plus/Makefile.inc $(srcdir)/nvidia_smi/Makefile.inc $(srcdir)/nsd/Makefile.inc $(srcdir)/ntpd/Makefile.inc $(srcdir)/ovpn_status_log/Makefile.inc $(srcdir)/openldap/Makefile.inc $(srcdir)/oracledb/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/portcheck/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/postgres/Makefile.inc $(srcdir)/powerdns/Makefile.inc $(srcdir)/proxysql/Makefile.inc $(srcdir)/puppet/Makefile.inc $(srcdir)/rabbitmq/Makefile.inc $(srcdir)/redis/Makefile.inc $(srcdir)/rethinkdbs/Makefile.inc $(srcdir)/retroshare/Makefile.inc $(srcdir)/riakkv/Makefile.inc $(srcdir)/samba/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/smartd_log/Makefile.inc $(srcdir)/spigotmc/Makefile.inc $(srcdir)/springboot/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(srcdir)/tor/Makefile.inc $(srcdir)/traefik/Makefile.inc $(srcdir)/unbound/Makefile.inc $(srcdir)/uwsgi/Makefile.inc $(srcdir)/varnish/Makefile.inc $(srcdir)/w1sensor/Makefile.inc $(srcdir)/web_log/Makefile.inc $(am__empty): + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_pluginsSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) +install-dist_pythonSCRIPTS: $(dist_python_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_python_SCRIPTS)'; test -n "$(pythondir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pythondir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pythondir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pythondir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pythondir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_pythonSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_SCRIPTS)'; test -n "$(pythondir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(pythondir)'; $(am__uninstall_files_from_dir) +install-dist_basesDATA: $(dist_bases_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_bases_DATA)'; test -n "$(basesdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(basesdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(basesdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(basesdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(basesdir)" || exit $$?; \ + done + +uninstall-dist_basesDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_bases_DATA)'; test -n "$(basesdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(basesdir)'; $(am__uninstall_files_from_dir) +install-dist_bases_framework_servicesDATA: $(dist_bases_framework_services_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_bases_framework_services_DATA)'; test -n "$(bases_framework_servicesdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bases_framework_servicesdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bases_framework_servicesdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bases_framework_servicesdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(bases_framework_servicesdir)" || exit $$?; \ + done + +uninstall-dist_bases_framework_servicesDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_bases_framework_services_DATA)'; test -n "$(bases_framework_servicesdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(bases_framework_servicesdir)'; $(am__uninstall_files_from_dir) +install-dist_libconfigDATA: $(dist_libconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \ + done + +uninstall-dist_libconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_pythonDATA: $(dist_python_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_DATA)'; test -n "$(pythondir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pythondir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pythondir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythondir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pythondir)" || exit $$?; \ + done + +uninstall-dist_pythonDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_DATA)'; test -n "$(pythondir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pythondir)'; $(am__uninstall_files_from_dir) +install-dist_python_urllib3DATA: $(dist_python_urllib3_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_urllib3_DATA)'; test -n "$(python_urllib3dir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(python_urllib3dir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3dir)" || exit $$?; \ + done + +uninstall-dist_python_urllib3DATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_urllib3_DATA)'; test -n "$(python_urllib3dir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(python_urllib3dir)'; $(am__uninstall_files_from_dir) +install-dist_python_urllib3_backportsDATA: $(dist_python_urllib3_backports_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_urllib3_backports_DATA)'; test -n "$(python_urllib3_backportsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_backportsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(python_urllib3_backportsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_backportsdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_backportsdir)" || exit $$?; \ + done + +uninstall-dist_python_urllib3_backportsDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_urllib3_backports_DATA)'; test -n "$(python_urllib3_backportsdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(python_urllib3_backportsdir)'; $(am__uninstall_files_from_dir) +install-dist_python_urllib3_contribDATA: $(dist_python_urllib3_contrib_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_urllib3_contrib_DATA)'; test -n "$(python_urllib3_contribdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_contribdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(python_urllib3_contribdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_contribdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_contribdir)" || exit $$?; \ + done + +uninstall-dist_python_urllib3_contribDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_urllib3_contrib_DATA)'; test -n "$(python_urllib3_contribdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(python_urllib3_contribdir)'; $(am__uninstall_files_from_dir) +install-dist_python_urllib3_packagesDATA: $(dist_python_urllib3_packages_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_urllib3_packages_DATA)'; test -n "$(python_urllib3_packagesdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_packagesdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(python_urllib3_packagesdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_packagesdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_packagesdir)" || exit $$?; \ + done + +uninstall-dist_python_urllib3_packagesDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_urllib3_packages_DATA)'; test -n "$(python_urllib3_packagesdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(python_urllib3_packagesdir)'; $(am__uninstall_files_from_dir) +install-dist_python_urllib3_securetransportDATA: $(dist_python_urllib3_securetransport_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_urllib3_securetransport_DATA)'; test -n "$(python_urllib3_securetransportdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_securetransportdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(python_urllib3_securetransportdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_securetransportdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_securetransportdir)" || exit $$?; \ + done + +uninstall-dist_python_urllib3_securetransportDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_urllib3_securetransport_DATA)'; test -n "$(python_urllib3_securetransportdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(python_urllib3_securetransportdir)'; $(am__uninstall_files_from_dir) +install-dist_python_urllib3_ssl_match_hostnameDATA: $(dist_python_urllib3_ssl_match_hostname_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_urllib3_ssl_match_hostname_DATA)'; test -n "$(python_urllib3_ssl_match_hostnamedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" || exit $$?; \ + done + +uninstall-dist_python_urllib3_ssl_match_hostnameDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_urllib3_ssl_match_hostname_DATA)'; test -n "$(python_urllib3_ssl_match_hostnamedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)'; $(am__uninstall_files_from_dir) +install-dist_python_urllib3_utilDATA: $(dist_python_urllib3_util_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_python_urllib3_util_DATA)'; test -n "$(python_urllib3_utildir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_utildir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(python_urllib3_utildir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_utildir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_utildir)" || exit $$?; \ + done + +uninstall-dist_python_urllib3_utilDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_python_urllib3_util_DATA)'; test -n "$(python_urllib3_utildir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(python_urllib3_utildir)'; $(am__uninstall_files_from_dir) +install-dist_pythonconfigDATA: $(dist_pythonconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_pythonconfig_DATA)'; test -n "$(pythonconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pythonconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pythonconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonconfigdir)" || exit $$?; \ + done + +uninstall-dist_pythonconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_pythonconfig_DATA)'; test -n "$(pythonconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pythonconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_pythonmodulesDATA: $(dist_pythonmodules_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_pythonmodules_DATA)'; test -n "$(pythonmodulesdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pythonmodulesdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pythonmodulesdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonmodulesdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonmodulesdir)" || exit $$?; \ + done + +uninstall-dist_pythonmodulesDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_pythonmodules_DATA)'; test -n "$(pythonmodulesdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pythonmodulesdir)'; $(am__uninstall_files_from_dir) +install-dist_pythonyaml2DATA: $(dist_pythonyaml2_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_pythonyaml2_DATA)'; test -n "$(pythonyaml2dir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pythonyaml2dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pythonyaml2dir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonyaml2dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonyaml2dir)" || exit $$?; \ + done + +uninstall-dist_pythonyaml2DATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_pythonyaml2_DATA)'; test -n "$(pythonyaml2dir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pythonyaml2dir)'; $(am__uninstall_files_from_dir) +install-dist_pythonyaml3DATA: $(dist_pythonyaml3_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_pythonyaml3_DATA)'; test -n "$(pythonyaml3dir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pythonyaml3dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pythonyaml3dir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonyaml3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonyaml3dir)" || exit $$?; \ + done + +uninstall-dist_pythonyaml3DATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_pythonyaml3_DATA)'; test -n "$(pythonyaml3dir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pythonyaml3dir)'; $(am__uninstall_files_from_dir) +install-dist_third_partyDATA: $(dist_third_party_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_third_party_DATA)'; test -n "$(third_partydir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(third_partydir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(third_partydir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(third_partydir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(third_partydir)" || exit $$?; \ + done + +uninstall-dist_third_partyDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_third_party_DATA)'; test -n "$(third_partydir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(third_partydir)'; $(am__uninstall_files_from_dir) +install-dist_userpythonconfigDATA: $(dist_userpythonconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_userpythonconfig_DATA)'; test -n "$(userpythonconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(userpythonconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(userpythonconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userpythonconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(userpythonconfigdir)" || exit $$?; \ + done + +uninstall-dist_userpythonconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_userpythonconfig_DATA)'; test -n "$(userpythonconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(userpythonconfigdir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) $(DATA) +installdirs: + for dir in "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(pythondir)" "$(DESTDIR)$(basesdir)" "$(DESTDIR)$(bases_framework_servicesdir)" "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(pythondir)" "$(DESTDIR)$(python_urllib3dir)" "$(DESTDIR)$(python_urllib3_backportsdir)" "$(DESTDIR)$(python_urllib3_contribdir)" "$(DESTDIR)$(python_urllib3_packagesdir)" "$(DESTDIR)$(python_urllib3_securetransportdir)" "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" "$(DESTDIR)$(python_urllib3_utildir)" "$(DESTDIR)$(pythonconfigdir)" "$(DESTDIR)$(pythonmodulesdir)" "$(DESTDIR)$(pythonyaml2dir)" "$(DESTDIR)$(pythonyaml3dir)" "$(DESTDIR)$(third_partydir)" "$(DESTDIR)$(userpythonconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_basesDATA \ + install-dist_bases_framework_servicesDATA \ + install-dist_libconfigDATA install-dist_pluginsSCRIPTS \ + install-dist_pythonDATA install-dist_pythonSCRIPTS \ + install-dist_python_urllib3DATA \ + install-dist_python_urllib3_backportsDATA \ + install-dist_python_urllib3_contribDATA \ + install-dist_python_urllib3_packagesDATA \ + install-dist_python_urllib3_securetransportDATA \ + install-dist_python_urllib3_ssl_match_hostnameDATA \ + install-dist_python_urllib3_utilDATA \ + install-dist_pythonconfigDATA install-dist_pythonmodulesDATA \ + install-dist_pythonyaml2DATA install-dist_pythonyaml3DATA \ + install-dist_third_partyDATA install-dist_userpythonconfigDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_basesDATA \ + uninstall-dist_bases_framework_servicesDATA \ + uninstall-dist_libconfigDATA uninstall-dist_pluginsSCRIPTS \ + uninstall-dist_pythonDATA uninstall-dist_pythonSCRIPTS \ + uninstall-dist_python_urllib3DATA \ + uninstall-dist_python_urllib3_backportsDATA \ + uninstall-dist_python_urllib3_contribDATA \ + uninstall-dist_python_urllib3_packagesDATA \ + uninstall-dist_python_urllib3_securetransportDATA \ + uninstall-dist_python_urllib3_ssl_match_hostnameDATA \ + uninstall-dist_python_urllib3_utilDATA \ + uninstall-dist_pythonconfigDATA \ + uninstall-dist_pythonmodulesDATA \ + uninstall-dist_pythonyaml2DATA uninstall-dist_pythonyaml3DATA \ + uninstall-dist_third_partyDATA \ + uninstall-dist_userpythonconfigDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dist_basesDATA \ + install-dist_bases_framework_servicesDATA \ + install-dist_libconfigDATA install-dist_pluginsSCRIPTS \ + install-dist_pythonDATA install-dist_pythonSCRIPTS \ + install-dist_python_urllib3DATA \ + install-dist_python_urllib3_backportsDATA \ + install-dist_python_urllib3_contribDATA \ + install-dist_python_urllib3_packagesDATA \ + install-dist_python_urllib3_securetransportDATA \ + install-dist_python_urllib3_ssl_match_hostnameDATA \ + install-dist_python_urllib3_utilDATA \ + install-dist_pythonconfigDATA install-dist_pythonmodulesDATA \ + install-dist_pythonyaml2DATA install-dist_pythonyaml3DATA \ + install-dist_third_partyDATA install-dist_userpythonconfigDATA \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags-am \ + uninstall uninstall-am uninstall-dist_basesDATA \ + uninstall-dist_bases_framework_servicesDATA \ + uninstall-dist_libconfigDATA uninstall-dist_pluginsSCRIPTS \ + uninstall-dist_pythonDATA uninstall-dist_pythonSCRIPTS \ + uninstall-dist_python_urllib3DATA \ + uninstall-dist_python_urllib3_backportsDATA \ + uninstall-dist_python_urllib3_contribDATA \ + uninstall-dist_python_urllib3_packagesDATA \ + uninstall-dist_python_urllib3_securetransportDATA \ + uninstall-dist_python_urllib3_ssl_match_hostnameDATA \ + uninstall-dist_python_urllib3_utilDATA \ + uninstall-dist_pythonconfigDATA \ + uninstall-dist_pythonmodulesDATA \ + uninstall-dist_pythonyaml2DATA uninstall-dist_pythonyaml3DATA \ + uninstall-dist_third_partyDATA \ + uninstall-dist_userpythonconfigDATA + +.PRECIOUS: Makefile + +.in: + if sed \ + -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \ + -e 's#[@]sbindir_POST@#$(sbindir)#g' \ + -e 's#[@]pluginsdir_POST@#$(pluginsdir)#g' \ + -e 's#[@]configdir_POST@#$(configdir)#g' \ + -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \ + -e 's#[@]cachedir_POST@#$(cachedir)#g' \ + -e 's#[@]registrydir_POST@#$(registrydir)#g' \ + -e 's#[@]varlibdir_POST@#$(varlibdir)#g' \ + $< > $@.tmp; then \ + mv "$@.tmp" "$@"; \ + else \ + rm -f "$@.tmp"; \ + false; \ + fi + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/collectors/python.d.plugin/README.md b/collectors/python.d.plugin/README.md index 32437c6db..d0074a124 100644 --- a/collectors/python.d.plugin/README.md +++ b/collectors/python.d.plugin/README.md @@ -1,13 +1,13 @@ # python.d.plugin -`python.d.plugin` is a netdata external plugin. It is an **orchestrator** for data collection modules written in `python`. +`python.d.plugin` is a Netdata external plugin. It is an **orchestrator** for data collection modules written in `python`. -1. It runs as an independent process `ps fax` shows it -2. It is started and stopped automatically by netdata -3. It communicates with netdata via a unidirectional pipe (sending data to the netdata daemon) -4. Supports any number of data collection **modules** -5. Allows each **module** to have one or more data collection **jobs** -6. Each **job** is collecting one or more metrics from a single data source +1. It runs as an independent process `ps fax` shows it +2. It is started and stopped automatically by Netdata +3. It communicates with Netdata via a unidirectional pipe (sending data to the `netdata` daemon) +4. Supports any number of data collection **modules** +5. Allows each **module** to have one or more data collection **jobs** +6. Each **job** is collecting one or more metrics from a single data source ## Disclaimer @@ -17,7 +17,7 @@ Module configurations are written in YAML and **pyYAML is required**. Every configuration file must have one of two formats: -- Configuration for only one job: +- Configuration for only one job: ```yaml update_every : 2 # update frequency @@ -27,7 +27,7 @@ other_var1 : bla # variables passed to module other_var2 : alb ``` -- Configuration for many jobs (ex. mysql): +- Configuration for many jobs (ex. mysql): ```yaml # module defaults: @@ -51,6 +51,7 @@ other_job: # become user netdata sudo su -s /bin/bash netdata ``` + Depending on where Netdata was installed, execute one of the following commands to trace the execution of a python module: ``` @@ -58,16 +59,18 @@ Depending on where Netdata was installed, execute one of the following commands /opt/netdata/usr/libexec/netdata/plugins.d/python.d.plugin <module> debug trace /usr/libexec/netdata/plugins.d/python.d.plugin <module> debug trace ``` -Where `[module]` is the directory name under https://github.com/netdata/netdata/tree/master/collectors/python.d.plugin + +Where `[module]` is the directory name under <https://github.com/netdata/netdata/tree/master/collectors/python.d.plugin> ## How to write a new module Writing new python module is simple. You just need to remember to include 5 major things: -- **ORDER** global list -- **CHART** global dictionary -- **Service** class -- **_get_data** method -- all code needs to be compatible with Python 2 (**≥ 2.7**) *and* 3 (**≥ 3.1**) + +- **ORDER** global list +- **CHART** global dictionary +- **Service** class +- **\_get_data** method +- all code needs to be compatible with Python 2 (**≥ 2.7**) *and* 3 (**≥ 3.1**) If you plan to submit the module in a PR, make sure and go through the [PR checklist for new modules](#pull-request-checklist-for-python-plugins) beforehand to make sure you have updated all the files you need to. @@ -76,11 +79,13 @@ For a quick start, you can look at the [example plugin](example/example.chart.py ### Global variables `ORDER` and `CHART` `ORDER` list should contain the order of chart ids. Example: + ```py ORDER = ['first_chart', 'second_chart', 'third_chart'] ``` `CHART` dictionary is a little bit trickier. It should contain the chart definition in following format: + ```py CHART = { id: { @@ -97,15 +102,16 @@ Parameters like `priority` and `update_every` are handled by `python.d.plugin`. Every module needs to implement its own `Service` class. This class should inherit from one of the framework classes: -- `SimpleService` -- `UrlService` -- `SocketService` -- `LogService` -- `ExecutableService` +- `SimpleService` +- `UrlService` +- `SocketService` +- `LogService` +- `ExecutableService` Also it needs to invoke the parent class constructor in a specific way as well as assign global variables to class variables. Simple example: + ```py from base import UrlService class Service(UrlService): @@ -120,6 +126,7 @@ class Service(UrlService): This method should grab raw data from `_get_raw_data`, parse it, and return a dictionary where keys are unique dimension names or `None` if no data is collected. Example: + ```py def _get_data(self): try: @@ -129,12 +136,12 @@ def _get_data(self): return None ``` -More about framework classes -============================ +# More about framework classes Every framework class has some user-configurable variables which are specific to this particular class. Those variables should have default values initialized in the child class constructor. If module needs some additional user-configurable variable, it can be accessed from the `self.configuration` list and assigned in constructor or custom `check` method. Example: + ```py def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) @@ -153,11 +160,12 @@ _This is last resort class, if a new module cannot be written by using other fra _Example: `ceph`, `sensors`_ It is the lowest-level class which implements most of module logic, like: -- threading -- handling run times -- chart formatting -- logging -- chart creation and updating + +- threading +- handling run times +- chart formatting +- logging +- chart creation and updating ### `LogService` @@ -174,11 +182,12 @@ _Examples: `exim`, `postfix`_ _Variable from config file_: `command`. This allows to execute a shell command in a secure way. It will check for invalid characters in `command` variable and won't proceed if there is one of: -- '&' -- '|' -- ';' -- '>' -- '<' + +- '&' +- '|' +- ';' +- '>' +- '\<' For additional security it uses python `subprocess.Popen` (without `shell=True` option) to execute command. Command can be specified with absolute or relative name. When using relative name, it will try to find `command` in `PATH` environment variable as well as in `/sbin` and `/usr/sbin`. @@ -214,12 +223,12 @@ This is a generic checklist for submitting a new Python plugin for Netdata. It At minimum, to be buildable and testable, the PR needs to include: -* The module itself, following proper naming conventions: `python.d/<module_dir>/<module_name>.chart.py` -* A README.md file for the plugin under `python.d/<module_dir>`. -* The configuration file for the module: `conf.d/python.d/<module_name>.conf`. Python config files are in YAML format, and should include comments describing what options are present. The instructions are also needed in the configuration section of the README.md -* A basic configuration for the plugin in the appropriate global config file: `conf.d/python.d.conf`, which is also in YAML format. Either add a line that reads `# <module_name>: yes` if the module is to be enabled by default, or one that reads `<module_name>: no` if it is to be disabled by default. -* A line for the plugin in `python.d/Makefile.am` under `dist_python_DATA`. -* A line for the plugin configuration file in `conf.d/Makefile.am`, under `dist_pythonconfig_DATA` -* Optionally, chart information in `web/dashboard_info.js`. This generally involves specifying a name and icon for the section, and may include descriptions for the section or individual charts. +- The module itself, following proper naming conventions: `python.d/<module_dir>/<module_name>.chart.py` +- A README.md file for the plugin under `python.d/<module_dir>`. +- The configuration file for the module: `conf.d/python.d/<module_name>.conf`. Python config files are in YAML format, and should include comments describing what options are present. The instructions are also needed in the configuration section of the README.md +- A basic configuration for the plugin in the appropriate global config file: `conf.d/python.d.conf`, which is also in YAML format. Either add a line that reads `# <module_name>: yes` if the module is to be enabled by default, or one that reads `<module_name>: no` if it is to be disabled by default. +- A line for the plugin in `python.d/Makefile.am` under `dist_python_DATA`. +- A line for the plugin configuration file in `conf.d/Makefile.am`, under `dist_pythonconfig_DATA` +- Optionally, chart information in `web/dashboard_info.js`. This generally involves specifying a name and icon for the section, and may include descriptions for the section or individual charts. -[]() +[](<>) diff --git a/collectors/python.d.plugin/adaptec_raid/README.md b/collectors/python.d.plugin/adaptec_raid/README.md index 682280f2e..127d595b2 100644 --- a/collectors/python.d.plugin/adaptec_raid/README.md +++ b/collectors/python.d.plugin/adaptec_raid/README.md @@ -3,35 +3,39 @@ Module collects logical and physical devices health metrics. **Requirements:** -* `arcconf` program -* `sudo` program -* `netdata` user needs to be able to sudo the `arcconf` program without password + +- `arcconf` program +- `sudo` program +- `netdata` user needs to be able to sudo the `arcconf` program without password To grab stats it executes: - * `sudo -n arcconf GETCONFIG 1 LD` - * `sudo -n arcconf GETCONFIG 1 PD` +- `sudo -n arcconf GETCONFIG 1 LD` +- `sudo -n arcconf GETCONFIG 1 PD` It produces: -1. **Logical Device Status** +1. **Logical Device Status** + +2. **Physical Device State** -2. **Physical Device State** +3. **Physical Device S.M.A.R.T warnings** -3. **Physical Device S.M.A.R.T warnings** +4. **Physical Device Temperature** -4. **Physical Device Temperature** +## prerequisite -### prerequisite This module uses `arcconf` which can only be executed by root. It uses `sudo` and assumes that it is configured such that the `netdata` user can execute `arcconf` as root without password. Add to `sudoers`: - netdata ALL=(root) NOPASSWD: /path/to/arcconf +``` +netdata ALL=(root) NOPASSWD: /path/to/arcconf +``` -### configuration +## configuration **adaptec_raid** is disabled by default. Should be explicitly enabled in `python.d.conf`. @@ -39,10 +43,10 @@ Add to `sudoers`: adaptec_raid: yes ``` -#### Screenshot: +### Screenshot:  --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/apache/README.md b/collectors/python.d.plugin/apache/README.md index 090feb070..8f0ec0c1c 100644 --- a/collectors/python.d.plugin/apache/README.md +++ b/collectors/python.d.plugin/apache/README.md @@ -3,38 +3,47 @@ This module will monitor one or more Apache servers depending on configuration. **Requirements:** - * apache with enabled `mod_status` + +- apache with enabled `mod_status` It produces the following charts: -1. **Requests** in requests/s - * requests +1. **Requests** in requests/s + + - requests + +2. **Connections** + + - connections + +3. **Async Connections** + + - keepalive + - closing + - writing + +4. **Bandwidth** in kilobytes/s + + - sent + +5. **Workers** -2. **Connections** - * connections + - idle + - busy -3. **Async Connections** - * keepalive - * closing - * writing +6. **Lifetime Avg. Requests/s** in requests/s -4. **Bandwidth** in kilobytes/s - * sent + - requests_sec -5. **Workers** - * idle - * busy +7. **Lifetime Avg. Bandwidth/s** in kilobytes/s -6. **Lifetime Avg. Requests/s** in requests/s - * requests_sec + - size_sec -7. **Lifetime Avg. Bandwidth/s** in kilobytes/s - * size_sec +8. **Lifetime Avg. Response Size** in bytes/request -8. **Lifetime Avg. Response Size** in bytes/request - * size_req + - size_req -### configuration +## configuration Needs only `url` to server's `server-status?auto` @@ -56,4 +65,4 @@ Without configuration, module attempts to connect to `http://localhost/server-st --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/beanstalk/README.md b/collectors/python.d.plugin/beanstalk/README.md index 8daa36604..c93dfa0d4 100644 --- a/collectors/python.d.plugin/beanstalk/README.md +++ b/collectors/python.d.plugin/beanstalk/README.md @@ -3,93 +3,107 @@ Module provides server and tube-level statistics: **Requirements:** - * `python-beanstalkc` + +- `python-beanstalkc` **Server statistics:** -1. **Cpu usage** in cpu time - * user - * system - -2. **Jobs rate** in jobs/s - * total - * timeouts - -3. **Connections rate** in connections/s - * connections - -4. **Commands rate** in commands/s - * put - * peek - * peek-ready - * peek-delayed - * peek-buried - * reserve - * use - * watch - * ignore - * delete - * release - * bury - * kick - * stats - * stats-job - * stats-tube - * list-tubes - * list-tube-used - * list-tubes-watched - * pause-tube - -5. **Current tubes** in tubes - * tubes - -6. **Current jobs** in jobs - * urgent - * ready - * reserved - * delayed - * buried - -7. **Current connections** in connections - * written - * producers - * workers - * waiting - -8. **Binlog** in records/s - * written - * migrated - -9. **Uptime** in seconds - * uptime +1. **Cpu usage** in cpu time + + - user + - system + +2. **Jobs rate** in jobs/s + + - total + - timeouts + +3. **Connections rate** in connections/s + + - connections + +4. **Commands rate** in commands/s + + - put + - peek + - peek-ready + - peek-delayed + - peek-buried + - reserve + - use + - watch + - ignore + - delete + - release + - bury + - kick + - stats + - stats-job + - stats-tube + - list-tubes + - list-tube-used + - list-tubes-watched + - pause-tube + +5. **Current tubes** in tubes + + - tubes + +6. **Current jobs** in jobs + + - urgent + - ready + - reserved + - delayed + - buried + +7. **Current connections** in connections + + - written + - producers + - workers + - waiting + +8. **Binlog** in records/s + + - written + - migrated + +9. **Uptime** in seconds + + - uptime **Per tube statistics:** -1. **Jobs rate** in jobs/s - * jobs +1. **Jobs rate** in jobs/s + + - jobs + +2. **Jobs** in jobs + + - using + - ready + - reserved + - delayed + - buried + +3. **Connections** in connections -2. **Jobs** in jobs - * using - * ready - * reserved - * delayed - * buried + - using + - waiting + - watching -3. **Connections** in connections - * using - * waiting - * watching +4. **Commands** in commands/s -4. **Commands** in commands/s - * deletes - * pauses + - deletes + - pauses -5. **Pause** in seconds - * since - * left +5. **Pause** in seconds + - since + - left -### configuration +## configuration Sample: @@ -102,4 +116,4 @@ If no configuration is given, module will attempt to connect to beanstalkd on `1 --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/bind_rndc/README.md b/collectors/python.d.plugin/bind_rndc/README.md index fefe74931..021a5d660 100644 --- a/collectors/python.d.plugin/bind_rndc/README.md +++ b/collectors/python.d.plugin/bind_rndc/README.md @@ -3,50 +3,53 @@ Module parses bind dump file to collect real-time performance metrics **Requirements:** - * Version of bind must be 9.6 + - * Netdata must have permissions to run `rndc stats` + +- Version of bind must be 9.6 + +- Netdata must have permissions to run `rndc stats` It produces: -1. **Name server statistics** - * requests - * responses - * success - * auth_answer - * nonauth_answer - * nxrrset - * failure - * nxdomain - * recursion - * duplicate - * rejections - -2. **Incoming queries** - * RESERVED0 - * A - * NS - * CNAME - * SOA - * PTR - * MX - * TXT - * X25 - * AAAA - * SRV - * NAPTR - * A6 - * DS - * RSIG - * DNSKEY - * SPF - * ANY - * DLV - -3. **Outgoing queries** - * Same as Incoming queries - - -### configuration +1. **Name server statistics** + + - requests + - responses + - success + - auth_answer + - nonauth_answer + - nxrrset + - failure + - nxdomain + - recursion + - duplicate + - rejections + +2. **Incoming queries** + + - RESERVED0 + - A + - NS + - CNAME + - SOA + - PTR + - MX + - TXT + - X25 + - AAAA + - SRV + - NAPTR + - A6 + - DS + - RSIG + - DNSKEY + - SPF + - ANY + - DLV + +3. **Outgoing queries** + +- Same as Incoming queries + +## configuration Sample: @@ -59,4 +62,4 @@ If no configuration is given, module will attempt to read named.stats file at ` --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/boinc/README.md b/collectors/python.d.plugin/boinc/README.md index 0f0aa1c6e..260ae54b6 100644 --- a/collectors/python.d.plugin/boinc/README.md +++ b/collectors/python.d.plugin/boinc/README.md @@ -7,7 +7,7 @@ RPC interface that the BOINC monitoring GUI does. It provides charts tracking the total number of tasks and active tasks, as well as ones tracking each of the possible states for tasks. -### configuration +## configuration BOINC requires use of a password to access it's RPC interface. You can find this password in the `gui_rpc_auth.cfg` file in your BOINC directory. @@ -27,4 +27,4 @@ remote: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/ceph/README.md b/collectors/python.d.plugin/ceph/README.md index 9eecb223a..f5b36e149 100644 --- a/collectors/python.d.plugin/ceph/README.md +++ b/collectors/python.d.plugin/ceph/README.md @@ -4,25 +4,27 @@ This module monitors the ceph cluster usage and consumption data of a server. It produces: -* Cluster statistics (usage, available, latency, objects, read/write rate) -* OSD usage -* OSD latency -* Pool usage -* Pool read/write operations -* Pool read/write rate -* number of objects per pool +- Cluster statistics (usage, available, latency, objects, read/write rate) +- OSD usage +- OSD latency +- Pool usage +- Pool read/write operations +- Pool read/write rate +- number of objects per pool **Requirements:** -- `rados` python module -- Granting read permissions to ceph group from keyring file +- `rados` python module +- Granting read permissions to ceph group from keyring file + ```shell # chmod 640 /etc/ceph/ceph.client.admin.keyring ``` -### Configuration +## Configuration Sample: + ```yaml local: config_file: '/etc/ceph/ceph.conf' @@ -31,4 +33,4 @@ local: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/chrony/README.md b/collectors/python.d.plugin/chrony/README.md index 67ed1a059..a45adb333 100644 --- a/collectors/python.d.plugin/chrony/README.md +++ b/collectors/python.d.plugin/chrony/README.md @@ -4,21 +4,22 @@ This module monitors the precision and statistics of a local chronyd server. It produces: -* frequency -* last offset -* RMS offset -* residual freq -* root delay -* root dispersion -* skew -* system time +- frequency +- last offset +- RMS offset +- residual freq +- root delay +- root dispersion +- skew +- system time **Requirements:** -Verify that user netdata can execute `chronyc tracking`. If necessary, update `/etc/chrony.conf`, `cmdallow`. +Verify that user Netdata can execute `chronyc tracking`. If necessary, update `/etc/chrony.conf`, `cmdallow`. -### Configuration +## Configuration Sample: + ```yaml # data collection frequency: update_every: 1 @@ -30,4 +31,4 @@ local: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/couchdb/README.md b/collectors/python.d.plugin/couchdb/README.md index 2cc353edb..288970674 100644 --- a/collectors/python.d.plugin/couchdb/README.md +++ b/collectors/python.d.plugin/couchdb/README.md @@ -2,18 +2,19 @@ This module monitors vital statistics of a local Apache CouchDB 2.x server, including: -* Overall server reads/writes -* HTTP traffic breakdown - * Request methods (`GET`, `PUT`, `POST`, etc.) - * Response status codes (`200`, `201`, `4xx`, etc.) -* Active server tasks -* Replication status (CouchDB 2.1 and up only) -* Erlang VM stats -* Optional per-database statistics: sizes, # of docs, # of deleted docs +- Overall server reads/writes +- HTTP traffic breakdown + - Request methods (`GET`, `PUT`, `POST`, etc.) + - Response status codes (`200`, `201`, `4xx`, etc.) +- Active server tasks +- Replication status (CouchDB 2.1 and up only) +- Erlang VM stats +- Optional per-database statistics: sizes, # of docs, # of deleted docs -### Configuration +## Configuration Sample for a local server running on port 5984: + ```yaml local: user: 'admin' @@ -26,6 +27,7 @@ Be sure to specify a correct admin-level username and password. You may also need to change the `node` name; this should match the value of `-name NODENAME` in your CouchDB's `etc/vm.args` file. Typically this is of the form `couchdb@fully.qualified.domain.name` in a cluster, or `couchdb@127.0.0.1` / `couchdb@localhost` for a single-node server. If you want per-database statistics, these need to be added to the configuration, separated by spaces: + ```yaml local: ... @@ -34,4 +36,4 @@ local: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/dns_query_time/README.md b/collectors/python.d.plugin/dns_query_time/README.md index 73d70d3a2..ebf34a3d6 100644 --- a/collectors/python.d.plugin/dns_query_time/README.md +++ b/collectors/python.d.plugin/dns_query_time/README.md @@ -3,10 +3,11 @@ This module provides DNS query time statistics. **Requirement:** -* `python-dnspython` package + +- `python-dnspython` package It produces one aggregate chart or one chart per DNS server, showing the query time. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/dnsdist/README.md b/collectors/python.d.plugin/dnsdist/README.md index c7647a116..fecf4a5d8 100644 --- a/collectors/python.d.plugin/dnsdist/README.md +++ b/collectors/python.d.plugin/dnsdist/README.md @@ -4,42 +4,48 @@ Module monitor dnsdist performance and health metrics. Following charts are drawn: -1. **Response latency** - * latency-slow - * latency100-1000 - * latency50-100 - * latency10-50 - * latency1-10 - * latency0-1 - -2. **Cache performance** - * cache-hits - * cache-misses - -3. **ACL events** - * acl-drops - * rule-drop - * rule-nxdomain - * rule-refused - -4. **Noncompliant data** - * empty-queries - * no-policy - * noncompliant-queries - * noncompliant-responses - -5. **Queries** - * queries - * rdqueries - * rdqueries - -6. **Health** - * downstream-send-errors - * downstream-timeouts - * servfail-responses - * trunc-failures - -### configuration +1. **Response latency** + + - latency-slow + - latency100-1000 + - latency50-100 + - latency10-50 + - latency1-10 + - latency0-1 + +2. **Cache performance** + + - cache-hits + - cache-misses + +3. **ACL events** + + - acl-drops + - rule-drop + - rule-nxdomain + - rule-refused + +4. **Noncompliant data** + + - empty-queries + - no-policy + - noncompliant-queries + - noncompliant-responses + +5. **Queries** + + - queries + - rdqueries + - rdqueries + +6. **Health** + + - downstream-send-errors + - downstream-timeouts + - servfail-responses + - trunc-failures + +## configuration ```yaml localhost: @@ -53,4 +59,4 @@ localhost: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/dockerd/README.md b/collectors/python.d.plugin/dockerd/README.md index b09a5d59f..ec69262fa 100644 --- a/collectors/python.d.plugin/dockerd/README.md +++ b/collectors/python.d.plugin/dockerd/README.md @@ -3,26 +3,30 @@ Module monitor docker health metrics. **Requirement:** -* `docker` package, required version 3.2.0+ + +- `docker` package, required version 3.2.0+ Following charts are drawn: -1. **running containers** - * count +1. **running containers** + + - count + +2. **healthy containers** + + - count -2. **healthy containers** - * count +3. **unhealthy containers** -3. **unhealthy containers** - * count + - count -### configuration +## configuration ```yaml update_every : 1 priority : 60000 - ``` +``` --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/dovecot/README.md b/collectors/python.d.plugin/dovecot/README.md index de8788b36..6048f1a63 100644 --- a/collectors/python.d.plugin/dovecot/README.md +++ b/collectors/python.d.plugin/dovecot/README.md @@ -9,55 +9,67 @@ Module isn't compatible with new statistic api (v2.3), but you are still able to by following [upgrading steps.](https://wiki2.dovecot.org/Upgrading/2.3). **Requirement:** -Dovecot UNIX socket with R/W permissions for user netdata or Dovecot with configured TCP/IP socket. +Dovecot UNIX socket with R/W permissions for user `netdata` or Dovecot with configured TCP/IP socket. Module gives information with following charts: -1. **sessions** - * active sessions +1. **sessions** -2. **logins** - * logins + - active sessions -3. **commands** - number of IMAP commands - * commands +2. **logins** -4. **Faults** - * minor - * major + - logins -5. **Context Switches** - * volountary - * involountary +3. **commands** - number of IMAP commands -6. **disk** in bytes/s - * read - * write + - commands -7. **bytes** in bytes/s - * read - * write +4. **Faults** -8. **number of syscalls** in syscalls/s - * read - * write + - minor + - major -9. **lookups** - number of lookups per second - * path - * attr +5. **Context Switches** + + - volountary + - involountary + +6. **disk** in bytes/s + + - read + - write + +7. **bytes** in bytes/s + + - read + - write + +8. **number of syscalls** in syscalls/s + + - read + - write + +9. **lookups** - number of lookups per second + + - path + - attr 10. **hits** - number of cache hits - * hits + + - hits 11. **attempts** - authorization attempts - * success - * failure + + - success + - failure 12. **cache** - cached authorization hits - * hit - * miss -### configuration + - hit + - miss + +## configuration Sample: @@ -76,4 +88,4 @@ If no configuration is given, module will attempt to connect to dovecot using un --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/elasticsearch/README.md b/collectors/python.d.plugin/elasticsearch/README.md index 6d25b02d1..a719a9431 100644 --- a/collectors/python.d.plugin/elasticsearch/README.md +++ b/collectors/python.d.plugin/elasticsearch/README.md @@ -4,46 +4,54 @@ This module monitors Elasticsearch performance and health metrics. It produces: -1. **Search performance** charts: - * Number of queries, fetches - * Time spent on queries, fetches - * Query and fetch latency - -2. **Indexing performance** charts: - * Number of documents indexed, index refreshes, flushes - * Time spent on indexing, refreshing, flushing - * Indexing and flushing latency - -3. **Memory usage and garbace collection** charts: - * JVM heap currently in use, committed - * Count of garbage collections - * Time spent on garbage collections - -4. **Host metrics** charts: - * Available file descriptors in percent - * Opened HTTP connections - * Cluster communication transport metrics - -5. **Queues and rejections** charts: - * Number of queued/rejected threads in thread pool - -6. **Fielddata cache** charts: - * Fielddata cache size - * Fielddata evictions and circuit breaker tripped count - -7. **Cluster health API** charts: - * Cluster status - * Nodes and tasks statistics - * Shards statistics - -8. **Cluster stats API** charts: - * Nodes statistics - * Query cache statistics - * Docs statistics - * Store statistics - * Indices and shards statistics - -### configuration +1. **Search performance** charts: + + - Number of queries, fetches + - Time spent on queries, fetches + - Query and fetch latency + +2. **Indexing performance** charts: + + - Number of documents indexed, index refreshes, flushes + - Time spent on indexing, refreshing, flushing + - Indexing and flushing latency + +3. **Memory usage and garbace collection** charts: + + - JVM heap currently in use, committed + - Count of garbage collections + - Time spent on garbage collections + +4. **Host metrics** charts: + + - Available file descriptors in percent + - Opened HTTP connections + - Cluster communication transport metrics + +5. **Queues and rejections** charts: + + - Number of queued/rejected threads in thread pool + +6. **Fielddata cache** charts: + + - Fielddata cache size + - Fielddata evictions and circuit breaker tripped count + +7. **Cluster health API** charts: + + - Cluster status + - Nodes and tasks statistics + - Shards statistics + +8. **Cluster stats API** charts: + + - Nodes statistics + - Query cache statistics + - Docs statistics + - Store statistics + - Indices and shards statistics + +## configuration Sample: @@ -59,4 +67,4 @@ If no configuration is given, module will fail to run. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/energid/README.md b/collectors/python.d.plugin/energid/README.md index 645170e8f..fc5101590 100644 --- a/collectors/python.d.plugin/energid/README.md +++ b/collectors/python.d.plugin/energid/README.md @@ -43,6 +43,7 @@ long daemon startup. ## Configuration Sample: + ```yaml energi: host: '127.0.0.1' @@ -59,4 +60,4 @@ bitcoin: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/example/README.md b/collectors/python.d.plugin/example/README.md index 552f2e41b..699ebe69c 100644 --- a/collectors/python.d.plugin/example/README.md +++ b/collectors/python.d.plugin/example/README.md @@ -3,4 +3,4 @@ An example python data collection module. You can use this example to help you [write a new Python module](../#how-to-write-a-new-module). -[]() +[](<>) diff --git a/collectors/python.d.plugin/exim/README.md b/collectors/python.d.plugin/exim/README.md index 1cebb27ff..985bd6e36 100644 --- a/collectors/python.d.plugin/exim/README.md +++ b/collectors/python.d.plugin/exim/README.md @@ -5,11 +5,12 @@ This command can take a lot of time to finish its execution thus it is not recom It produces only one chart: -1. **Exim Queue Emails** - * emails +1. **Exim Queue Emails** + + - emails Configuration is not needed. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/fail2ban/README.md b/collectors/python.d.plugin/fail2ban/README.md index 26511986a..1ab0f6f63 100644 --- a/collectors/python.d.plugin/fail2ban/README.md +++ b/collectors/python.d.plugin/fail2ban/README.md @@ -3,11 +3,12 @@ Module monitor fail2ban log file to show all bans for all active jails **Requirements:** - * fail2ban.log file MUST BE readable by netdata (A good idea is to add **create 0640 root netdata** to fail2ban conf at logrotate.d) + +- fail2ban.log file MUST BE readable by Netdata (A good idea is to add **create 0640 root netdata** to fail2ban conf at logrotate.d) It produces one chart with multiple lines (one line per jail) -### configuration +## configuration Sample: @@ -17,9 +18,10 @@ local: conf_path: '/etc/fail2ban/jail.local' exclude: 'dropbear apache' ``` + If no configuration is given, module will attempt to read log file at `/var/log/fail2ban.log` and conf file at `/etc/fail2ban/jail.local`. If conf file is not found default jail is `ssh`. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/freeradius/README.md b/collectors/python.d.plugin/freeradius/README.md index 00eb50dff..3a2cdf9b4 100644 --- a/collectors/python.d.plugin/freeradius/README.md +++ b/collectors/python.d.plugin/freeradius/README.md @@ -4,44 +4,47 @@ Uses the `radclient` command to provide freeradius statistics. It is not recomme It produces: -1. **Authentication counters:** - * access-accepts - * access-rejects - * auth-dropped-requests - * auth-duplicate-requests - * auth-invalid-requests - * auth-malformed-requests - * auth-unknown-types - -2. **Accounting counters:** [optional] - * accounting-requests - * accounting-responses - * acct-dropped-requests - * acct-duplicate-requests - * acct-invalid-requests - * acct-malformed-requests - * acct-unknown-types - -3. **Proxy authentication counters:** [optional] - * proxy-access-accepts - * proxy-access-rejects - * proxy-auth-dropped-requests - * proxy-auth-duplicate-requests - * proxy-auth-invalid-requests - * proxy-auth-malformed-requests - * proxy-auth-unknown-types - -4. **Proxy accounting counters:** [optional] - * proxy-accounting-requests - * proxy-accounting-responses - * proxy-acct-dropped-requests - * proxy-acct-duplicate-requests - * proxy-acct-invalid-requests - * proxy-acct-malformed-requests - * proxy-acct-unknown-typesa - - -### configuration +1. **Authentication counters:** + + - access-accepts + - access-rejects + - auth-dropped-requests + - auth-duplicate-requests + - auth-invalid-requests + - auth-malformed-requests + - auth-unknown-types + +2. **Accounting counters:** [optional] + + - accounting-requests + - accounting-responses + - acct-dropped-requests + - acct-duplicate-requests + - acct-invalid-requests + - acct-malformed-requests + - acct-unknown-types + +3. **Proxy authentication counters:** [optional] + + - proxy-access-accepts + - proxy-access-rejects + - proxy-auth-dropped-requests + - proxy-auth-duplicate-requests + - proxy-auth-invalid-requests + - proxy-auth-malformed-requests + - proxy-auth-unknown-types + +4. **Proxy accounting counters:** [optional] + + - proxy-accounting-requests + - proxy-accounting-responses + - proxy-acct-dropped-requests + - proxy-acct-duplicate-requests + - proxy-acct-invalid-requests + - proxy-acct-malformed-requests + - proxy-acct-unknown-typesa + +## configuration Sample: @@ -62,11 +65,12 @@ By default, server is enabled and can be queried from every client. FreeRADIUS will only respond to status-server messages, if the status-server virtual server has been enabled. To do this, create a link from the sites-enabled directory to the status file in the sites-available directory: - * cd sites-enabled - * ln -s ../sites-available/status status + +- cd sites-enabled +- ln -s ../sites-available/status status and restart/reload your FREERADIUS server. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/go_expvar/README.md b/collectors/python.d.plugin/go_expvar/README.md index 3942a7be8..7d78fabd0 100644 --- a/collectors/python.d.plugin/go_expvar/README.md +++ b/collectors/python.d.plugin/go_expvar/README.md @@ -7,28 +7,34 @@ The `go_expvar` module can monitor any Go application that exposes its metrics w For the memory statistics, it produces the following charts: -1. **Heap allocations** in kB - * alloc: size of objects allocated on the heap - * inuse: size of allocated heap spans +1. **Heap allocations** in kB -2. **Stack allocations** in kB - * inuse: size of allocated stack spans + - alloc: size of objects allocated on the heap + - inuse: size of allocated heap spans -3. **MSpan allocations** in kB - * inuse: size of allocated mspan structures +2. **Stack allocations** in kB -4. **MCache allocations** in kB - * inuse: size of allocated mcache structures + - inuse: size of allocated stack spans -5. **Virtual memory** in kB - * sys: size of reserved virtual address space +3. **MSpan allocations** in kB -6. **Live objects** - * live: number of live objects in memory + - inuse: size of allocated mspan structures -7. **GC pauses average** in ns - * avg: average duration of all GC stop-the-world pauses +4. **MCache allocations** in kB + - inuse: size of allocated mcache structures + +5. **Virtual memory** in kB + + - sys: size of reserved virtual address space + +6. **Live objects** + + - live: number of live objects in memory + +7. **GC pauses average** in ns + + - avg: average duration of all GC stop-the-world pauses ## Monitoring Go Applications @@ -102,9 +108,9 @@ Apart from the runtime memory stats, this application publishes two counters and number of currently running Goroutines and updates these stats every second. In the next section, we will cover how to monitor and chart these exposed stats with -the use of `netdata`s ```go_expvar``` module. +the use of `netdata`s `go_expvar` module. -### Using netdata go_expvar module +### Using Netdata go_expvar module The `go_expvar` module is disabled by default. To enable it, edit [`python.d.conf`](../python.d.conf) (to edit it on your system run `/etc/netdata/edit-config python.d.conf`), and change the `go_expvar` @@ -141,22 +147,30 @@ app1: Let's go over each of the defined options: - name: 'app1' +``` +name: 'app1' +``` -This is the job name that will appear at the netdata dashboard. +This is the job name that will appear at the Netdata dashboard. If not defined, the job_name (top level key) will be used. - url: 'http://127.0.0.1:8080/debug/vars' +``` +url: 'http://127.0.0.1:8080/debug/vars' +``` This is the URL of the expvar endpoint. As the expvar handler can be installed in a custom path, the whole URL has to be specified. This value is mandatory. - collect_memstats: true +``` +collect_memstats: true +``` Whether to enable collecting stats about Go runtime's memory. You can find more information about the exposed values at the [runtime package docs](https://golang.org/pkg/runtime/#MemStats). - extra_charts: {} +``` +extra_charts: {} +``` Enables the user to specify custom expvars to monitor and chart. Will be explained in more detail below. @@ -164,52 +178,58 @@ Will be explained in more detail below. **Note: if `collect_memstats` is disabled and no `extra_charts` are defined, the plugin will disable itself, as there will be no data to collect!** -Apart from these options, each job supports options inherited from netdata's `python.d.plugin` +Apart from these options, each job supports options inherited from Netdata's `python.d.plugin` and its base `UrlService` class. These are: - update_every: 1 # the job's data collection frequency - priority: 60000 # the job's order on the dashboard - user: admin # use when the expvar endpoint is protected by HTTP Basic Auth - password: sekret # use when the expvar endpoint is protected by HTTP Basic Auth +``` +update_every: 1 # the job's data collection frequency +priority: 60000 # the job's order on the dashboard +user: admin # use when the expvar endpoint is protected by HTTP Basic Auth +password: sekret # use when the expvar endpoint is protected by HTTP Basic Auth +``` ### Monitoring custom vars with go_expvar -Now, memory stats might be useful, but what if you want netdata to monitor some custom values +Now, memory stats might be useful, but what if you want Netdata to monitor some custom values that your Go application exposes? The `go_expvar` module can do that as well with the use of the `extra_charts` configuration variable. -The `extra_charts` variable is a YaML list of netdata chart definitions. +The `extra_charts` variable is a YaML list of Netdata chart definitions. Each chart definition has the following keys: - id: netdata chart ID - options: a key-value mapping of chart options - lines: a list of line definitions +``` +id: Netdata chart ID +options: a key-value mapping of chart options +lines: a list of line definitions +``` **Note: please do not use dots in the chart or line ID field. See [this issue](https://github.com/netdata/netdata/pull/1902#issuecomment-284494195) for explanation.** -Please see these two links to the official netdata documentation for more information about the values: +Please see these two links to the official Netdata documentation for more information about the values: -- [External plugins - charts](../../plugins.d/#chart) -- [Chart variables](../#global-variables-order-and-chart) +- [External plugins - charts](../../plugins.d/#chart) +- [Chart variables](../#global-variables-order-and-chart) **Line definitions** Each chart can define multiple lines (dimensions). A line definition is a key-value mapping of line options. Each line can have the following options: - - # mandatory - expvar_key: the name of the expvar as present in the JSON output of /debug/vars endpoint - expvar_type: value type; supported are "float" or "int" - id: the id of this line/dimension in netdata - - # optional - netdata defaults are used if these options are not defined - name: '' - algorithm: absolute - multiplier: 1 - divisor: 100 if expvar_type == float, 1 if expvar_type == int - hidden: False + +``` +# mandatory +expvar_key: the name of the expvar as present in the JSON output of /debug/vars endpoint +expvar_type: value type; supported are "float" or "int" +id: the id of this line/dimension in Netdata + +# optional - Netdata defaults are used if these options are not defined +name: '' +algorithm: absolute +multiplier: 1 +divisor: 100 if expvar_type == float, 1 if expvar_type == int +hidden: False +``` Please see the following link for more information about the options and their default values: [External plugins - dimensions](../../plugins.d/#dimension) @@ -219,6 +239,7 @@ All dicts in the resulting JSON document are then flattened to one level. Expvar names are joined together with '.' when flattening. Example: + ``` { "counters": {"cnt1": 1042, "cnt2": 1512.9839999999983}, @@ -267,11 +288,10 @@ app1: **Netdata charts example** -The images below show how do the final charts in netdata look. +The images below show how do the final charts in Netdata look.   - -[]() +[](<>) diff --git a/collectors/python.d.plugin/haproxy/README.md b/collectors/python.d.plugin/haproxy/README.md index 4bd80a23d..c4bb0447e 100644 --- a/collectors/python.d.plugin/haproxy/README.md +++ b/collectors/python.d.plugin/haproxy/README.md @@ -6,27 +6,29 @@ And health metrics such as backend servers status (server check should be used). Plugin can obtain data from url **OR** unix socket. **Requirement:** -Socket MUST be readable AND writable by netdata user. +Socket MUST be readable AND writable by the `netdata` user. It produces: -1. **Frontend** family charts - * Kilobytes in/s - * Kilobytes out/s - * Sessions current - * Sessions in queue current +1. **Frontend** family charts -2. **Backend** family charts - * Kilobytes in/s - * Kilobytes out/s - * Sessions current - * Sessions in queue current + - Kilobytes in/s + - Kilobytes out/s + - Sessions current + - Sessions in queue current -3. **Health** chart - * number of failed servers for every backend (in DOWN state) +2. **Backend** family charts + - Kilobytes in/s + - Kilobytes out/s + - Sessions current + - Sessions in queue current -### configuration +3. **Health** chart + + - number of failed servers for every backend (in DOWN state) + +## configuration Sample: @@ -48,4 +50,4 @@ If no configuration is given, module will fail to run. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/hddtemp/README.md b/collectors/python.d.plugin/hddtemp/README.md index d9f254d51..03474c893 100644 --- a/collectors/python.d.plugin/hddtemp/README.md +++ b/collectors/python.d.plugin/hddtemp/README.md @@ -7,7 +7,7 @@ Running `hddtemp` in daemonized mode with access on tcp port It produces one chart **Temperature** with dynamic number of dimensions (one per disk) -### configuration +## configuration Sample: @@ -21,4 +21,4 @@ If no configuration is given, module will attempt to connect to hddtemp daemon o --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/httpcheck/README.md b/collectors/python.d.plugin/httpcheck/README.md index 4cd024d12..99b28cfeb 100644 --- a/collectors/python.d.plugin/httpcheck/README.md +++ b/collectors/python.d.plugin/httpcheck/README.md @@ -4,18 +4,20 @@ Module monitors remote http server for availability and response time. Following charts are drawn per job: -1. **Response time** ms - * Time in 0.1 ms resolution in which the server responds. - If the connection failed, the value is missing. +1. **Response time** ms -2. **Status** boolean - * Connection successful - * Unexpected content: No Regex match found in the response - * Unexpected status code: Do we get 500 errors? - * Connection failed: port not listening or blocked - * Connection timed out: host or port unreachable + - Time in 0.1 ms resolution in which the server responds. + If the connection failed, the value is missing. -### configuration +2. **Status** boolean + + - Connection successful + - Unexpected content: No Regex match found in the response + - Unexpected status code: Do we get 500 errors? + - Connection failed: port not listening or blocked + - Connection timed out: host or port unreachable + +## configuration Sample configuration and their default values. @@ -32,12 +34,12 @@ server: ### notes - * The status chart is primarily intended for alarms, badges or for access via API. - * A system/service/firewall might block netdata's access if a portscan or - similar is detected. - * This plugin is meant for simple use cases. Currently, the accuracy of the - response time is low and should be used as reference only. +- The status chart is primarily intended for alarms, badges or for access via API. +- A system/service/firewall might block Netdata's access if a portscan or + similar is detected. +- This plugin is meant for simple use cases. Currently, the accuracy of the + response time is low and should be used as reference only. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/icecast/README.md b/collectors/python.d.plugin/icecast/README.md index 068da6a06..eabfee0a6 100644 --- a/collectors/python.d.plugin/icecast/README.md +++ b/collectors/python.d.plugin/icecast/README.md @@ -3,14 +3,16 @@ This module will monitor number of listeners for active sources. **Requirements:** - * icecast version >= 2.4.0 + +- icecast version >= 2.4.0 It produces the following charts: -1. **Listeners** in listeners - * source number +1. **Listeners** in listeners + +- source number -### configuration +## configuration Needs only `url` to server's `/status-json.xsl` @@ -25,4 +27,4 @@ Without configuration, module attempts to connect to `http://localhost:8443/stat --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/ipfs/README.md b/collectors/python.d.plugin/ipfs/README.md index a83920370..639631501 100644 --- a/collectors/python.d.plugin/ipfs/README.md +++ b/collectors/python.d.plugin/ipfs/README.md @@ -2,14 +2,16 @@ Module monitors [IPFS](https://ipfs.io) basic information. -1. **Bandwidth** in kbits/s - * in - * out +1. **Bandwidth** in kbits/s -2. **Peers** - * peers + - in + - out -### configuration +2. **Peers** + + - peers + +## configuration Only url to IPFS server is needed. @@ -23,5 +25,4 @@ localhost: --- - -[]() +[](<>) diff --git a/collectors/python.d.plugin/isc_dhcpd/README.md b/collectors/python.d.plugin/isc_dhcpd/README.md index 67547e2f6..f90cd041e 100644 --- a/collectors/python.d.plugin/isc_dhcpd/README.md +++ b/collectors/python.d.plugin/isc_dhcpd/README.md @@ -3,22 +3,25 @@ Module monitor leases database to show all active leases for given pools. **Requirements:** - * dhcpd leases file MUST BE readable by netdata - * pools MUST BE in CIDR format + +- dhcpd leases file MUST BE readable by Netdata +- pools MUST BE in CIDR format It produces: -1. **Pools utilization** Aggregate chart for all pools. - * utilization in percent +1. **Pools utilization** Aggregate chart for all pools. + + - utilization in percent + +2. **Total leases** -2. **Total leases** - * leases (overall number of leases for all pools) + - leases (overall number of leases for all pools) -3. **Active leases** for every pools - * leases (number of active leases in pool) +3. **Active leases** for every pools + - leases (number of active leases in pool) -### configuration +## configuration Sample: @@ -33,4 +36,4 @@ The module will not work If no configuration is given. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/litespeed/README.md b/collectors/python.d.plugin/litespeed/README.md index 88b672533..586973bf0 100644 --- a/collectors/python.d.plugin/litespeed/README.md +++ b/collectors/python.d.plugin/litespeed/README.md @@ -4,39 +4,48 @@ Module monitor litespeed web server performance metrics. It produces: -1. **Network Throughput HTTP** in kilobits/s - * in - * out +1. **Network Throughput HTTP** in kilobits/s -2. **Network Throughput HTTPS** in kilobits/s - * in - * out + - in + - out -3. **Connections HTTP** in connections - * free - * used +2. **Network Throughput HTTPS** in kilobits/s -4. **Connections HTTPS** in connections - * free - * used + - in + - out -5. **Requests** in requests/s - * requests +3. **Connections HTTP** in connections -6. **Requests In Processing** in requests - * processing + - free + - used -7. **Public Cache Hits** in hits/s - * hits +4. **Connections HTTPS** in connections -8. **Private Cache Hits** in hits/s - * hits + - free + - used -9. **Static Hits** in hits/s - * hits +5. **Requests** in requests/s + - requests + +6. **Requests In Processing** in requests + + - processing + +7. **Public Cache Hits** in hits/s + + - hits + +8. **Private Cache Hits** in hits/s + + - hits + +9. **Static Hits** in hits/s + + - hits + +## configuration -### configuration ```yaml local: path : 'PATH' @@ -46,4 +55,4 @@ If no configuration is given, module will use "/tmp/lshttpd/". --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/logind/README.md b/collectors/python.d.plugin/logind/README.md index c35630c8f..5aa1fa627 100644 --- a/collectors/python.d.plugin/logind/README.md +++ b/collectors/python.d.plugin/logind/README.md @@ -4,22 +4,25 @@ This module monitors active sessions, users, and seats tracked by systemd-logind It provides the following charts: -1. **Sessions** Tracks the total number of sessions. - * Graphical: Local graphical sessions (running X11, or Wayland, or something else). - * Console: Local console sessions. - * Remote: Remote sessions. +1. **Sessions** Tracks the total number of sessions. -2. **Users** Tracks total number of unique user logins of each type. - * Graphical - * Console - * Remote + - Graphical: Local graphical sessions (running X11, or Wayland, or something else). + - Console: Local console sessions. + - Remote: Remote sessions. -3. **Seats** Total number of seats in use. - * Seats +2. **Users** Tracks total number of unique user logins of each type. -### configuration + - Graphical + - Console + - Remote -This module needs no configuration. Just make sure the netdata user +3. **Seats** Total number of seats in use. + + - Seats + +## configuration + +This module needs no configuration. Just make sure the `netdata` user can run the `loginctl` command and get a session list without having to specify a path. @@ -32,25 +35,25 @@ specify it using the `command` key like so: command: '/path/to/other/command' ``` -### notes +## notes -* This module's ability to track logins is dependent on what PAM services -are configured to register sessions with logind. In particular, for -most systems, it will only track TTY logins, local desktop logins, -and logins through remote shell connections. +- This module's ability to track logins is dependent on what PAM services + are configured to register sessions with logind. In particular, for + most systems, it will only track TTY logins, local desktop logins, + and logins through remote shell connections. -* The users chart counts _usernames_ not UID's. This is potentially -important in configurations where multiple users have the same UID. +- The users chart counts _usernames_ not UID's. This is potentially + important in configurations where multiple users have the same UID. -* The users chart counts any given user name up to once for _each_ type -of login. So if the same user has a graphical and a console login on a -system, they will show up once in the graphical count, and once in the -console count. +- The users chart counts any given user name up to once for _each_ type + of login. So if the same user has a graphical and a console login on a + system, they will show up once in the graphical count, and once in the + console count. -* Because the data collection process is rather expensive, this plugin -is currently disabled by default, and needs to be explicitly enabled in -`/etc/netdata/python.d.conf` before it will run. +- Because the data collection process is rather expensive, this plugin + is currently disabled by default, and needs to be explicitly enabled in + `/etc/netdata/python.d.conf` before it will run. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/megacli/README.md b/collectors/python.d.plugin/megacli/README.md index e96015ddb..afc8cbda6 100644 --- a/collectors/python.d.plugin/megacli/README.md +++ b/collectors/python.d.plugin/megacli/README.md @@ -3,48 +3,54 @@ Module collects adapter, physical drives and battery stats. **Requirements:** - * `megacli` program - * `sudo` program - * `netdata` user needs to be able to be able to sudo the `megacli` program without password + +- `megacli` program +- `sudo` program +- `netdata` user needs to be able to be able to sudo the `megacli` program without password To grab stats it executes: - * `sudo -n megacli -LDPDInfo -aAll` - * `sudo -n megacli -AdpBbuCmd -a0` +- `sudo -n megacli -LDPDInfo -aAll` +- `sudo -n megacli -AdpBbuCmd -a0` It produces: -1. **Adapter State** +1. **Adapter State** + +2. **Physical Drives Media Errors** -2. **Physical Drives Media Errors** +3. **Physical Drives Predictive Failures** -3. **Physical Drives Predictive Failures** +4. **Battery Relative State of Charge** -4. **Battery Relative State of Charge** +5. **Battery Cycle Count** -5. **Battery Cycle Count** +## prerequisite -### prerequisite This module uses `megacli` which can only be executed by root. It uses `sudo` and assumes that it is configured such that the `netdata` user can execute `megacli` as root without password. Add to `sudoers`: - netdata ALL=(root) NOPASSWD: /path/to/megacli +``` +netdata ALL=(root) NOPASSWD: /path/to/megacli +``` ### configuration **megacli** is disabled by default. Should be explicitly enabled in `python.d.conf`. + ```yaml megacli: yes ``` Battery stats disabled by default. To enable them modify `megacli.conf`. + ```yaml do_battery: yes ``` --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/memcached/README.md b/collectors/python.d.plugin/memcached/README.md index 98627c4a3..169a5f7bf 100644 --- a/collectors/python.d.plugin/memcached/README.md +++ b/collectors/python.d.plugin/memcached/README.md @@ -2,58 +2,71 @@ Memcached monitoring module. Data grabbed from [stats interface](https://github.com/memcached/memcached/wiki/Commands#stats). -1. **Network** in kilobytes/s - * read - * written +1. **Network** in kilobytes/s -2. **Connections** per second - * current - * rejected - * total + - read + - written -3. **Items** in cluster - * current - * total +2. **Connections** per second -4. **Evicted and Reclaimed** items - * evicted - * reclaimed + - current + - rejected + - total -5. **GET** requests/s - * hits - * misses +3. **Items** in cluster -6. **GET rate** rate in requests/s - * rate + - current + - total -7. **SET rate** rate in requests/s - * rate +4. **Evicted and Reclaimed** items -8. **DELETE** requests/s - * hits - * misses + - evicted + - reclaimed -9. **CAS** requests/s - * hits - * misses - * bad value +5. **GET** requests/s + + - hits + - misses + +6. **GET rate** rate in requests/s + + - rate + +7. **SET rate** rate in requests/s + + - rate + +8. **DELETE** requests/s + + - hits + - misses + +9. **CAS** requests/s + + - hits + - misses + - bad value 10. **Increment** requests/s - * hits - * misses + + - hits + - misses 11. **Decrement** requests/s - * hits - * misses + + - hits + - misses 12. **Touch** requests/s - * hits - * misses + + - hits + - misses 13. **Touch rate** rate in requests/s - * rate -### configuration + - rate + +## configuration Sample: @@ -68,4 +81,4 @@ If no configuration is given, module will attempt to connect to memcached instan --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/mongodb/README.md b/collectors/python.d.plugin/mongodb/README.md index 3ddf137d7..fd694c1e5 100644 --- a/collectors/python.d.plugin/mongodb/README.md +++ b/collectors/python.d.plugin/mongodb/README.md @@ -3,135 +3,161 @@ Module monitor mongodb performance and health metrics **Requirements:** - * `python-pymongo` package v2.4+. -You need to install it manually. +- `python-pymongo` package v2.4+. +You need to install it manually. Number of charts depends on mongodb version, storage engine and other features (replication): -1. **Read requests**: - * query - * getmore (operation the cursor executes to get additional data from query) - -2. **Write requests**: - * insert - * delete - * update - -3. **Active clients**: - * readers (number of clients with read operations in progress or queued) - * writers (number of clients with write operations in progress or queued) - -4. **Journal transactions**: - * commits (count of transactions that have been written to the journal) - -5. **Data written to the journal**: - * volume (volume of data) - -6. **Background flush** (MMAPv1): - * average ms (average time taken by flushes to execute) - * last ms (time taken by the last flush) - -8. **Read tickets** (WiredTiger): - * in use (number of read tickets in use) - * available (number of available read tickets remaining) - -9. **Write tickets** (WiredTiger): - * in use (number of write tickets in use) - * available (number of available write tickets remaining) - -10. **Cursors**: - * opened (number of cursors currently opened by MongoDB for clients) - * timedOut (number of cursors that have timed) - * noTimeout (number of open cursors with timeout disabled) - -11. **Connections**: - * connected (number of clients currently connected to the database server) - * unused (number of unused connections available for new clients) - -12. **Memory usage metrics**: - * virtual - * resident (amount of memory used by the database process) - * mapped - * non mapped - -13. **Page faults**: - * page faults (number of times MongoDB had to request from disk) - -14. **Cache metrics** (WiredTiger): - * percentage of bytes currently in the cache (amount of space taken by cached data) - * percantage of tracked dirty bytes in the cache (amount of space taken by dirty data) - -15. **Pages evicted from cache** (WiredTiger): - * modified - * unmodified - -16. **Queued requests**: - * readers (number of read request currently queued) - * writers (number of write request currently queued) - -17. **Errors**: - * msg (number of message assertions raised) - * warning (number of warning assertions raised) - * regular (number of regular assertions raised) - * user (number of assertions corresponding to errors generated by users) - -18. **Storage metrics** (one chart for every database) - * dataSize (size of all documents + padding in the database) - * indexSize (size of all indexes in the database) - * storageSize (size of all extents in the database) - -19. **Documents in the database** (one chart for all databases) - * documents (number of objects in the database among all the collections) - -20. **tcmalloc metrics** - * central cache free - * current total thread cache - * pageheap free - * pageheap unmapped - * thread cache free - * transfer cache free - * heap size - -21. **Commands total/failed rate** - * count - * createIndex - * delete - * eval - * findAndModify - * insert - -22. **Locks metrics** (acquireCount metrics - number of times the lock was acquired in the specified mode) - * Global lock - * Database lock - * Collection lock - * Metadata lock - * oplog lock - -23. **Replica set members state** - * state - -24. **Oplog window** - * window (interval of time between the oldest and the latest entries in the oplog) - -25. **Replication lag** - * member (time when last entry from the oplog was applied for every member) - -26. **Replication set member heartbeat latency** - * member (time when last heartbeat was received from replica set member) - -### prerequisite -Create a read-only user for the netdata in the admin database. - -1. Authenticate as the admin user. +1. **Read requests**: + + - query + - getmore (operation the cursor executes to get additional data from query) + +2. **Write requests**: + + - insert + - delete + - update + +3. **Active clients**: + + - readers (number of clients with read operations in progress or queued) + - writers (number of clients with write operations in progress or queued) + +4. **Journal transactions**: + + - commits (count of transactions that have been written to the journal) + +5. **Data written to the journal**: + + - volume (volume of data) + +6. **Background flush** (MMAPv1): + + - average ms (average time taken by flushes to execute) + - last ms (time taken by the last flush) + +7. **Read tickets** (WiredTiger): + + - in use (number of read tickets in use) + - available (number of available read tickets remaining) + +8. **Write tickets** (WiredTiger): + + - in use (number of write tickets in use) + - available (number of available write tickets remaining) + +9. **Cursors**: + +- opened (number of cursors currently opened by MongoDB for clients) +- timedOut (number of cursors that have timed) +- noTimeout (number of open cursors with timeout disabled) + +10. **Connections**: + + - connected (number of clients currently connected to the database server) + - unused (number of unused connections available for new clients) + +11. **Memory usage metrics**: + + - virtual + - resident (amount of memory used by the database process) + - mapped + - non mapped + +12. **Page faults**: + + - page faults (number of times MongoDB had to request from disk) + +13. **Cache metrics** (WiredTiger): + + - percentage of bytes currently in the cache (amount of space taken by cached data) + - percantage of tracked dirty bytes in the cache (amount of space taken by dirty data) + +14. **Pages evicted from cache** (WiredTiger): + + - modified + - unmodified + +15. **Queued requests**: + + - readers (number of read request currently queued) + - writers (number of write request currently queued) + +16. **Errors**: + + - msg (number of message assertions raised) + - warning (number of warning assertions raised) + - regular (number of regular assertions raised) + - user (number of assertions corresponding to errors generated by users) + +17. **Storage metrics** (one chart for every database) + + - dataSize (size of all documents + padding in the database) + - indexSize (size of all indexes in the database) + - storageSize (size of all extents in the database) + +18. **Documents in the database** (one chart for all databases) + +- documents (number of objects in the database among all the collections) + +19. **tcmalloc metrics** + + - central cache free + - current total thread cache + - pageheap free + - pageheap unmapped + - thread cache free + - transfer cache free + - heap size + +20. **Commands total/failed rate** + + - count + - createIndex + - delete + - eval + - findAndModify + - insert + +21. **Locks metrics** (acquireCount metrics - number of times the lock was acquired in the specified mode) + + - Global lock + - Database lock + - Collection lock + - Metadata lock + - oplog lock + +22. **Replica set members state** + + - state + +23. **Oplog window** + + - window (interval of time between the oldest and the latest entries in the oplog) + +24. **Replication lag** + + - member (time when last entry from the oplog was applied for every member) + +25. **Replication set member heartbeat latency** + + - member (time when last heartbeat was received from replica set member) + +## prerequisite + +Create a read-only user for Netdata in the admin database. + +1. Authenticate as the admin user. ``` use admin db.auth("admin", "<MONGODB_ADMIN_PASSWORD>") ``` -2. Create a user. +2. Create a user. ``` # MongoDB 2.x. @@ -161,11 +187,10 @@ local: port : 27017 user : 'netdata' pass : 'netdata' - ``` If no configuration is given, module will attempt to connect to mongodb daemon on `127.0.0.1:27017` address --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/mongodb/mongodb.chart.py b/collectors/python.d.plugin/mongodb/mongodb.chart.py index 5db48cb12..0dbe82ff9 100644 --- a/collectors/python.d.plugin/mongodb/mongodb.chart.py +++ b/collectors/python.d.plugin/mongodb/mongodb.chart.py @@ -3,6 +3,8 @@ # Author: ilyam8 # SPDX-License-Identifier: GPL-3.0-or-later +import ssl + from copy import deepcopy from datetime import datetime from sys import exc_info @@ -418,18 +420,31 @@ CHARTS = { } } +DEFAULT_HOST = '127.0.0.1' +DEFAULT_PORT = 27017 +DEFAULT_TIMEOUT = 100 +DEFAULT_AUTHDB = 'admin' + +CONN_PARAM_HOST = 'host' +CONN_PARAM_PORT = 'port' +CONN_PARAM_SERVER_SELECTION_TIMEOUT_MS = 'serverselectiontimeoutms' +CONN_PARAM_SSL_SSL = 'ssl' +CONN_PARAM_SSL_CERT_REQS = 'ssl_cert_reqs' +CONN_PARAM_SSL_CA_CERTS = 'ssl_ca_certs' +CONN_PARAM_SSL_CRL_FILE = 'ssl_crlfile' +CONN_PARAM_SSL_CERT_FILE = 'ssl_certfile' +CONN_PARAM_SSL_KEY_FILE = 'ssl_keyfile' +CONN_PARAM_SSL_PEM_PASSPHRASE = 'ssl_pem_passphrase' + class Service(SimpleService): def __init__(self, configuration=None, name=None): SimpleService.__init__(self, configuration=configuration, name=name) self.order = ORDER[:] self.definitions = deepcopy(CHARTS) - self.authdb = self.configuration.get('authdb', 'admin') + self.authdb = self.configuration.get('authdb', DEFAULT_AUTHDB) self.user = self.configuration.get('user') self.password = self.configuration.get('pass') - self.host = self.configuration.get('host', '127.0.0.1') - self.port = self.configuration.get('port', 27017) - self.timeout = self.configuration.get('timeout', 100) self.metrics_to_collect = deepcopy(DEFAULT_METRICS) self.connection = None self.do_replica = None @@ -705,14 +720,53 @@ class Service(SimpleService): return data - def _create_connection(self): - conn_vars = {'host': self.host, 'port': self.port} + def build_ssl_connection_params(self): + conf = self.configuration + + def cert_req(v): + if v is None: + return None + if not v: + return ssl.CERT_NONE + return ssl.CERT_REQUIRED + + ssl_params = { + CONN_PARAM_SSL_SSL: conf.get(CONN_PARAM_SSL_SSL), + CONN_PARAM_SSL_CERT_REQS: cert_req(conf.get(CONN_PARAM_SSL_CERT_REQS)), + CONN_PARAM_SSL_CA_CERTS: conf.get(CONN_PARAM_SSL_CA_CERTS), + CONN_PARAM_SSL_CRL_FILE: conf.get(CONN_PARAM_SSL_CRL_FILE), + CONN_PARAM_SSL_CERT_FILE: conf.get(CONN_PARAM_SSL_CERT_FILE), + CONN_PARAM_SSL_KEY_FILE: conf.get(CONN_PARAM_SSL_KEY_FILE), + CONN_PARAM_SSL_PEM_PASSPHRASE: conf.get(CONN_PARAM_SSL_PEM_PASSPHRASE), + } + + ssl_params = dict((k, v) for k, v in ssl_params.items() if v is not None) + + return ssl_params + + def build_connection_params(self): + conf = self.configuration + params = { + CONN_PARAM_HOST: conf.get(CONN_PARAM_HOST, DEFAULT_HOST), + CONN_PARAM_PORT: conf.get(CONN_PARAM_PORT, DEFAULT_PORT), + } if hasattr(MongoClient, 'server_selection_timeout'): - conn_vars.update({'serverselectiontimeoutms': self.timeout}) + params[CONN_PARAM_SERVER_SELECTION_TIMEOUT_MS] = conf.get('timeout', DEFAULT_TIMEOUT) + + params.update(self.build_ssl_connection_params()) + return params + + def _create_connection(self): + params = self.build_connection_params() + self.debug('creating connection, connection params: {0}'.format(sorted(params))) + try: - connection = MongoClient(**conn_vars) + connection = MongoClient(**params) if self.user and self.password: + self.debug('authenticating, user: {0}, password: {1}'.format(self.user, self.password)) getattr(connection, self.authdb).authenticate(name=self.user, password=self.password) + else: + self.debug('skip authenticating, user and password are not set') # elif self.user: # connection.admin.authenticate(name=self.user, mechanism='MONGODB-X509') server_status = connection.admin.command('serverStatus') diff --git a/collectors/python.d.plugin/mongodb/mongodb.conf b/collectors/python.d.plugin/mongodb/mongodb.conf index 2dded40ae..9f660f594 100644 --- a/collectors/python.d.plugin/mongodb/mongodb.conf +++ b/collectors/python.d.plugin/mongodb/mongodb.conf @@ -71,6 +71,16 @@ # user: 'username' # the mongodb username to use # pass: 'password' # the mongodb password to use # +# SSL connection parameters (https://api.mongodb.com/python/current/examples/tls.html): +# +# ssl: yes # connect to the server using TLS +# ssl_cert_reqs: yes # require a certificate from the server when TLS is enabled +# ssl_ca_certs: '/path/to/ca.pem' # use a specific set of CA certificates +# ssl_crlfile: '/path/to/crl.pem' # use a certificate revocation lists +# ssl_certfile: '/path/to/client.pem' # use a client certificate +# ssl_keyfile: '/path/to/key.pem' # use a specific client certificate key +# ssl_pem_passphrase: 'passphrase' # use a passphrase to decrypt encrypted private keys +# # ---------------------------------------------------------------------- # to connect to the mongodb on localhost, without a password: diff --git a/collectors/python.d.plugin/monit/README.md b/collectors/python.d.plugin/monit/README.md index 0f69aff29..a54b9d67f 100644 --- a/collectors/python.d.plugin/monit/README.md +++ b/collectors/python.d.plugin/monit/README.md @@ -2,21 +2,24 @@ Monit monitoring module. Data is grabbed from stats XML interface (exists for a long time, but not mentioned in official documentation). Mostly this plugin shows statuses of monit targets, i.e. [statuses of specified checks](https://mmonit.com/monit/documentation/monit.html#Service-checks). -1. **Filesystems** - * Filesystems - * Directories - * Files - * Pipes +1. **Filesystems** -2. **Applications** - * Processes (+threads/childs) - * Programs + - Filesystems + - Directories + - Files + - Pipes -3. **Network** - * Hosts (+latency) - * Network interfaces +2. **Applications** -### configuration + - Processes (+threads/childs) + - Programs + +3. **Network** + + - Hosts (+latency) + - Network interfaces + +## configuration Sample: @@ -32,4 +35,4 @@ If no configuration is given, module will attempt to connect to monit as `http:/ --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/mysql/README.md b/collectors/python.d.plugin/mysql/README.md index f7028ab68..45f842d42 100644 --- a/collectors/python.d.plugin/mysql/README.md +++ b/collectors/python.d.plugin/mysql/README.md @@ -3,255 +3,305 @@ Module monitors one or more mysql servers **Requirements:** - * python library [MySQLdb](https://github.com/PyMySQL/mysqlclient-python) (faster) or [PyMySQL](https://github.com/PyMySQL/PyMySQL) (slower) + +- python library [MySQLdb](https://github.com/PyMySQL/mysqlclient-python) (faster) or [PyMySQL](https://github.com/PyMySQL/PyMySQL) (slower) It will produce following charts (if data is available): -1. **Bandwidth** in kilobits/s - * in - * out - -2. **Queries** in queries/sec - * queries - * questions - * slow queries - -3. **Queries By Type** in queries/s - * select - * delete - * update - * insert - * cache hits - * replace - -4. **Handlerse** in handlers/s - * commit - * delete - * prepare - * read first - * read key - * read next - * read prev - * read rnd - * read rnd next - * rollback - * savepoint - * savepoint rollback - * update - * write - -4. **Table Locks** in locks/s - * immediate - * waited - -5. **Table Select Join Issuess** in joins/s - * full join - * full range join - * range - * range check - * scan - -6. **Table Sort Issuess** in joins/s - * merge passes - * range - * scan - -7. **Tmp Operations** in created/s - * disk tables - * files - * tables - -8. **Connections** in connections/s - * all - * aborted - -9. **Connections Active** in connections/s - * active - * limit - * max active - -10. **Binlog Cache** in threads - * disk - * all - -11. **Threads** in transactions/s - * connected - * cached - * running - -12. **Threads Creation Rate** in threads/s - * created - -13. **Threads Cache Misses** in misses - * misses - -14. **InnoDB I/O Bandwidth** in KiB/s - * read - * write - -15. **InnoDB I/O Operations** in operations/s - * reads - * writes - * fsyncs - -16. **InnoDB Pending I/O Operations** in operations/s - * reads - * writes - * fsyncs - -17. **InnoDB Log Operations** in operations/s - * waits - * write requests - * writes - -18. **InnoDB OS Log Pending Operations** in operations - * fsyncs - * writes - -19. **InnoDB OS Log Operations** in operations/s - * fsyncs - -20. **InnoDB OS Log Bandwidth** in KiB/s - * write - -21. **InnoDB Current Row Locks** in operations - * current waits - -22. **InnoDB Row Operations** in operations/s - * inserted - * read - * updated - * deleted - -23. **InnoDB Buffer Pool Pagess** in pages - * data - * dirty - * free - * misc - * total - -24. **InnoDB Buffer Pool Flush Pages Requests** in requests/s - * flush pages - -25. **InnoDB Buffer Pool Bytes** in MiB - * data - * dirty - -26. **InnoDB Buffer Pool Operations** in operations/s - * disk reads - * wait free - -27. **QCache Operations** in queries/s - * hits - * lowmem prunes - * inserts - * no caches - -28. **QCache Queries in Cache** in queries - * queries - -29. **QCache Free Memory** in MiB - * free - -30. **QCache Memory Blocks** in blocks - * free - * total - -31. **MyISAM Key Cache Blocks** in blocks - * unused - * used - * not flushed - -32. **MyISAM Key Cache Requests** in requests/s - * reads - * writes +1. **Bandwidth** in kilobits/s + + - in + - out + +2. **Queries** in queries/sec + + - queries + - questions + - slow queries + +3. **Queries By Type** in queries/s + + - select + - delete + - update + - insert + - cache hits + - replace + +4. **Handlerse** in handlers/s + + - commit + - delete + - prepare + - read first + - read key + - read next + - read prev + - read rnd + - read rnd next + - rollback + - savepoint + - savepoint rollback + - update + - write + +5. **Table Locks** in locks/s + + - immediate + - waited + +6. **Table Select Join Issuess** in joins/s + + - full join + - full range join + - range + - range check + - scan + +7. **Table Sort Issuess** in joins/s + + - merge passes + - range + - scan + +8. **Tmp Operations** in created/s + + - disk tables + - files + - tables + +9. **Connections** in connections/s + + - all + - aborted + +10. **Connections Active** in connections/s + + - active + - limit + - max active + +11. **Binlog Cache** in threads + + - disk + - all + +12. **Threads** in transactions/s + + - connected + - cached + - running + +13. **Threads Creation Rate** in threads/s + + - created + +14. **Threads Cache Misses** in misses + + - misses + +15. **InnoDB I/O Bandwidth** in KiB/s + + - read + - write + +16. **InnoDB I/O Operations** in operations/s + + - reads + - writes + - fsyncs + +17. **InnoDB Pending I/O Operations** in operations/s + + - reads + - writes + - fsyncs + +18. **InnoDB Log Operations** in operations/s + + - waits + - write requests + - writes + +19. **InnoDB OS Log Pending Operations** in operations + + - fsyncs + - writes + +20. **InnoDB OS Log Operations** in operations/s + + - fsyncs + +21. **InnoDB OS Log Bandwidth** in KiB/s + + - write + +22. **InnoDB Current Row Locks** in operations + + - current waits + +23. **InnoDB Row Operations** in operations/s + + - inserted + - read + - updated + - deleted + +24. **InnoDB Buffer Pool Pagess** in pages + + - data + - dirty + - free + - misc + - total + +25. **InnoDB Buffer Pool Flush Pages Requests** in requests/s + + - flush pages + +26. **InnoDB Buffer Pool Bytes** in MiB + + - data + - dirty + +27. **InnoDB Buffer Pool Operations** in operations/s + + - disk reads + - wait free + +28. **QCache Operations** in queries/s + + - hits + - lowmem prunes + - inserts + - no caches + +29. **QCache Queries in Cache** in queries + + - queries + +30. **QCache Free Memory** in MiB + + - free + +31. **QCache Memory Blocks** in blocks + + - free + - total + +32. **MyISAM Key Cache Blocks** in blocks + + - unused + - used + - not flushed 33. **MyISAM Key Cache Requests** in requests/s - * reads - * writes -34. **MyISAM Key Cache Disk Operations** in operations/s - * reads - * writes + - reads + - writes + +34. **MyISAM Key Cache Requests** in requests/s + + - reads + - writes + +35. **MyISAM Key Cache Disk Operations** in operations/s + + - reads + - writes + +36. **Open Files** in files + + - files + +37. **Opened Files Rate** in files/s + + - files -35. **Open Files** in files - * files +38. **Binlog Statement Cache** in statements/s -36. **Opened Files Rate** in files/s - * files + - disk + - all -37. **Binlog Statement Cache** in statements/s - * disk - * all +39. **Connection Errors** in errors/s -38. **Connection Errors** in errors/s - * accept - * internal - * max - * peer addr - * select - * tcpwrap + - accept + - internal + - max + - peer addr + - select + - tcpwrap -39. **Slave Behind Seconds** in seconds - * time +40. **Slave Behind Seconds** in seconds -40. **I/O / SQL Thread Running State** in bool - * sql - * io + - time -41. **Replicated Writesets** in writesets/s - * rx - * tx +41. **I/O / SQL Thread Running State** in bool -42. **Replicated Bytes** in KiB/s - * rx - * tx + - sql + - io -43. **Galera Queue** in writesets - * rx - * tx +42. **Replicated Writesets** in writesets/s -44. **Replication Conflicts** in transactions - * bf aborts - * cert fails + - rx + - tx -45. **Flow Control** in ms - * paused +43. **Replicated Bytes** in KiB/s -46. **Users CPU time** in percentage - * users + - rx + - tx + +44. **Galera Queue** in writesets + + - rx + - tx + +45. **Replication Conflicts** in transactions + + - bf aborts + - cert fails + +46. **Flow Control** in ms + + - paused + +47. **Users CPU time** in percentage + + - users **Per user statistics:** -1. **Rows Operations** in operations/s - * read - * send - * updated - * inserted - * deleted +1. **Rows Operations** in operations/s -2. **Commands** in commands/s - * select - * update - * other + - read + - send + - updated + - inserted + - deleted +2. **Commands** in commands/s -### configuration + - select + - update + - other + +## configuration You can provide, per server, the following: -1. username which have access to database (defaults to 'root') -2. password (defaults to none) -3. mysql my.cnf configuration file -4. mysql socket (optional) -5. mysql host (ip or hostname) -6. mysql port (defaults to 3306) -7. ssl connection parameters - - key: the path name of the client private key file. - - cert: the path name of the client public key certificate file. - - ca: the path name of the Certificate Authority (CA) certificate file. This option, if used, must specify the same certificate used by the server. - - capath: the path name of the directory that contains trusted SSL CA certificate files. - - cipher: the list of permitted ciphers for SSL encryption. +1. username which have access to database (defaults to 'root') +2. password (defaults to none) +3. mysql my.cnf configuration file +4. mysql socket (optional) +5. mysql host (ip or hostname) +6. mysql port (defaults to 3306) +7. ssl connection parameters + + - key: the path name of the client private key file. + - cert: the path name of the client public key certificate file. + - ca: the path name of the Certificate Authority (CA) certificate file. This option, if used, must specify the same certificate used by the server. + - capath: the path name of the directory that contains trusted SSL CA certificate files. + - cipher: the list of permitted ciphers for SSL encryption. Here is an example for 3 servers: @@ -282,4 +332,4 @@ If no configuration is given, module will attempt to connect to mysql server via --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/mysql/mysql.chart.py b/collectors/python.d.plugin/mysql/mysql.chart.py index 82bd90794..46d0712fb 100644 --- a/collectors/python.d.plugin/mysql/mysql.chart.py +++ b/collectors/python.d.plugin/mysql/mysql.chart.py @@ -601,6 +601,33 @@ CHARTS = { } +def slave_status_chart_template(channel_name): + order = [ + 'slave_behind_{0}'.format(channel_name), + 'slave_status_{0}'.format(channel_name) + ] + + charts = { + order[0]: { + 'options': [None, 'Slave Behind Seconds Channel {0}'.format(channel_name), + 'seconds', 'slave', 'mysql.slave_behind', 'line'], + 'lines': [ + ['Seconds_Behind_Master_{0}'.format(channel_name), 'seconds', 'absolute'] + ] + }, + order[1]: { + 'options': [None, 'Slave Status Channel {0}'.format(channel_name), + 'status', 'slave', 'mysql.slave_status', 'line'], + 'lines': [ + ['Slave_SQL_Running_{0}'.format(channel_name), 'sql_running', 'absolute'], + ['Slave_IO_Running_{0}'.format(channel_name), 'io_running', 'absolute'] + ] + }, + } + + return order, charts + + def userstats_chart_template(name): order = [ 'userstats_rows_{0}'.format(name), @@ -632,6 +659,10 @@ def userstats_chart_template(name): return order, charts +# https://dev.mysql.com/doc/refman/8.0/en/replication-channels.html +DEFAULT_REPL_CHANNEL = '' + + class Service(MySQLService): def __init__(self, configuration=None, name=None): MySQLService.__init__(self, configuration=configuration, name=name) @@ -643,6 +674,7 @@ class Service(MySQLService): variables=QUERY_VARIABLES, user_statistics=QUERY_USER_STATISTICS, ) + self.repl_channels = [DEFAULT_REPL_CHANNEL] def _get_data(self): @@ -651,29 +683,24 @@ class Service(MySQLService): if not raw_data: return None - to_netdata = dict() + data = dict() if 'global_status' in raw_data: global_status = dict(raw_data['global_status'][0]) for key in GLOBAL_STATS: if key in global_status: - to_netdata[key] = global_status[key] - if 'Threads_created' in to_netdata and 'Connections' in to_netdata: - to_netdata['Thread_cache_misses'] = round(int(to_netdata['Threads_created']) - / float(to_netdata['Connections']) * 10000) + data[key] = global_status[key] + if 'Threads_created' in data and 'Connections' in data: + data['Thread_cache_misses'] = round(int(data['Threads_created']) / float(data['Connections']) * 10000) if 'slave_status' in raw_data: - if raw_data['slave_status'][0]: - slave_raw_data = dict(zip([e[0] for e in raw_data['slave_status'][1]], raw_data['slave_status'][0][0])) - for key, func in SLAVE_STATS: - if key in slave_raw_data: - to_netdata[key] = func(slave_raw_data[key]) - else: - self.queries.pop('slave_status') + status = self.get_slave_status(raw_data['slave_status']) + if status: + data.update(status) if 'user_statistics' in raw_data: if raw_data['user_statistics'][0]: - to_netdata.update(self.get_userstats(raw_data)) + data.update(self.get_userstats(raw_data)) else: self.queries.pop('user_statistics') @@ -681,46 +708,75 @@ class Service(MySQLService): variables = dict(raw_data['variables'][0]) for key in VARIABLES: if key in variables: - to_netdata[key] = variables[key] - - return to_netdata or None - - # raw_data['user_statistics'] contains the following data structure: - # ( - # ( - # ('netdata', 42L, 0L, 1264L, 3.111252999999968, 2.968510299999994, 110267L, 19741424L, 0L, 0L, 1265L, 0L, - # 0L, 0L, 3L, 0L, 1301L, 0L, 0L, 7633L, 0L, 83L, 44L, 0L, 0L), - # ('root', 60L, 0L, 184L, 0.22856499999999966, 0.1601419999999998, 11605L, 1516513L, 0L, 9L, 220L, 0L, 2L, 1L, - # 6L, 4L,127L, 0L, 0L, 45L, 0L, 45L, 0L, 0L, 0L) - # ), - # ( - # ('User', 253, 9, 128, 128, 0, 0), - # ('Total_connections', 3, 2, 11, 11, 0, 0), - # ('Concurrent_connections', 3, 1, 11, 11, 0, 0), - # ('Connected_time', 3, 4, 11, 11, 0, 0), - # ('Busy_time', 5, 21, 21, 21, 31, 0), - # ('Cpu_time', 5, 18, 21, 21, 31, 0), - # ('Bytes_received', 8, 6, 21, 21, 0, 0), - # ('Bytes_sent', 8, 8, 21, 21, 0, 0), - # ('Binlog_bytes_written', 8, 1, 21, 21, 0, 0), - # ('Rows_read', 8, 1, 21, 21, 0, 0), - # ('Rows_sent', 8, 4, 21, 21, 0, 0), - # ('Rows_deleted', 8, 1, 21, 21, 0, 0), - # ('Rows_inserted', 8, 1, 21, 21, 0, 0), - # ('Rows_updated', 8, 1, 21, 21, 0, 0), - # ('Select_commands', 8, 1, 21, 21, 0, 0), - # ('Update_commands', 8, 1, 21, 21, 0, 0), - # ('Other_commands', 8, 4, 21, 21, 0, 0), - # ('Commit_transactions', 8, 1, 21, 21, 0, 0), - # ('Rollback_transactions', 8, 1, 21, 21, 0, 0), - # ('Denied_connections', 8, 4, 21, 21, 0, 0), - # ('Lost_connections', 8, 1, 21, 21, 0, 0), - # ('Access_denied', 8, 2, 21, 21, 0, 0), - # ('Empty_queries', 8, 2, 21, 21, 0, 0), - # ('Total_ssl_connections', 8, 1, 21, 21, 0, 0), - # ('Max_statement_time_exceeded', 8, 1, 21, 21, 0, 0)), - # ) + data[key] = variables[key] + + return data or None + + def get_slave_status(self, slave_status_data): + rows, description = slave_status_data[0], slave_status_data[1] + description_keys = [v[0] for v in description] + if not rows: + return + + data = dict() + for row in rows: + slave_data = dict(zip(description_keys, row)) + channel_name = slave_data.get('Channel_Name', DEFAULT_REPL_CHANNEL) + + if channel_name not in self.repl_channels and len(self.charts) > 0: + self.add_repl_channel_charts(channel_name) + self.repl_channels.append(channel_name) + + for key, func in SLAVE_STATS: + if key not in slave_data: + continue + + value = slave_data[key] + if channel_name: + key = '{0}_{1}'.format(key, channel_name) + data[key] = func(value) + + return data + + def add_repl_channel_charts(self, name): + self.add_new_charts(slave_status_chart_template, name) + def get_userstats(self, raw_data): + # raw_data['user_statistics'] contains the following data structure: + # ( + # ( + # ('netdata', 42L, 0L, 1264L, 3.111252999999968, 2.968510299999994, 110267L, 19741424L, 0L, 0L, 1265L, 0L, + # 0L, 0L, 3L, 0L, 1301L, 0L, 0L, 7633L, 0L, 83L, 44L, 0L, 0L), + # ('root', 60L, 0L, 184L, 0.22856499999999966, 0.1601419999999998, 11605L, 1516513L, 0L, 9L, 220L, 0L, 2L, 1L, + # 6L, 4L,127L, 0L, 0L, 45L, 0L, 45L, 0L, 0L, 0L) + # ), + # ( + # ('User', 253, 9, 128, 128, 0, 0), + # ('Total_connections', 3, 2, 11, 11, 0, 0), + # ('Concurrent_connections', 3, 1, 11, 11, 0, 0), + # ('Connected_time', 3, 4, 11, 11, 0, 0), + # ('Busy_time', 5, 21, 21, 21, 31, 0), + # ('Cpu_time', 5, 18, 21, 21, 31, 0), + # ('Bytes_received', 8, 6, 21, 21, 0, 0), + # ('Bytes_sent', 8, 8, 21, 21, 0, 0), + # ('Binlog_bytes_written', 8, 1, 21, 21, 0, 0), + # ('Rows_read', 8, 1, 21, 21, 0, 0), + # ('Rows_sent', 8, 4, 21, 21, 0, 0), + # ('Rows_deleted', 8, 1, 21, 21, 0, 0), + # ('Rows_inserted', 8, 1, 21, 21, 0, 0), + # ('Rows_updated', 8, 1, 21, 21, 0, 0), + # ('Select_commands', 8, 1, 21, 21, 0, 0), + # ('Update_commands', 8, 1, 21, 21, 0, 0), + # ('Other_commands', 8, 4, 21, 21, 0, 0), + # ('Commit_transactions', 8, 1, 21, 21, 0, 0), + # ('Rollback_transactions', 8, 1, 21, 21, 0, 0), + # ('Denied_connections', 8, 4, 21, 21, 0, 0), + # ('Lost_connections', 8, 1, 21, 21, 0, 0), + # ('Access_denied', 8, 2, 21, 21, 0, 0), + # ('Empty_queries', 8, 2, 21, 21, 0, 0), + # ('Total_ssl_connections', 8, 1, 21, 21, 0, 0), + # ('Max_statement_time_exceeded', 8, 1, 21, 21, 0, 0)), + # ) data = dict() userstats_vars = [e[0] for e in raw_data['user_statistics'][1]] for i, _ in enumerate(raw_data['user_statistics'][0]): @@ -742,7 +798,10 @@ class Service(MySQLService): self.charts['userstats_cpu'].add_dimension(['userstats_{0}_Cpu_time'.format(name), name, 'incremental', 100, 1]) def create_new_userstats_charts(self, tube): - order, charts = userstats_chart_template(tube) + self.add_new_charts(userstats_chart_template, tube) + + def add_new_charts(self, template, *params): + order, charts = template(*params) for chart_name in order: params = [chart_name] + charts[chart_name]['options'] diff --git a/collectors/python.d.plugin/nginx/README.md b/collectors/python.d.plugin/nginx/README.md index 7854105b7..ebbdb0f25 100644 --- a/collectors/python.d.plugin/nginx/README.md +++ b/collectors/python.d.plugin/nginx/README.md @@ -3,29 +3,34 @@ This module will monitor one or more nginx servers depending on configuration. Servers can be either local or remote. **Requirements:** - * nginx with configured 'ngx_http_stub_status_module' - * 'location /stub_status' + +- nginx with configured 'ngx_http_stub_status_module' +- 'location /stub_status' Example nginx configuration can be found in 'python.d/nginx.conf' It produces following charts: -1. **Active Connections** - * active +1. **Active Connections** + + - active + +2. **Requests** in requests/s + + - requests + +3. **Active Connections by Status** -2. **Requests** in requests/s - * requests + - reading + - writing + - waiting -3. **Active Connections by Status** - * reading - * writing - * waiting +4. **Connections Rate** in connections/s -4. **Connections Rate** in connections/s - * accepts - * handled + - accepts + - handled -### configuration +## configuration Needs only `url` to server's `stub_status` @@ -43,4 +48,4 @@ Without configuration, module attempts to connect to `http://localhost/stub_stat --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/nginx_plus/README.md b/collectors/python.d.plugin/nginx_plus/README.md index c20ce30a0..1110c5524 100644 --- a/collectors/python.d.plugin/nginx_plus/README.md +++ b/collectors/python.d.plugin/nginx_plus/README.md @@ -7,109 +7,134 @@ Example nginx_plus configuration can be found in 'python.d/nginx_plus.conf' It produces following charts: -1. **Requests total** in requests/s - * total +1. **Requests total** in requests/s -2. **Requests current** in requests - * current + - total -3. **Connection Statistics** in connections/s - * accepted - * dropped +2. **Requests current** in requests -4. **Workers Statistics** in workers - * idle - * active + - current -5. **SSL Handshakes** in handshakes/s - * successful - * failed +3. **Connection Statistics** in connections/s -6. **SSL Session Reuses** in sessions/s - * reused + - accepted + - dropped -7. **SSL Memory Usage** in percent - * usage +4. **Workers Statistics** in workers -8. **Processes** in processes - * respawned + - idle + - active + +5. **SSL Handshakes** in handshakes/s + + - successful + - failed + +6. **SSL Session Reuses** in sessions/s + + - reused + +7. **SSL Memory Usage** in percent + + - usage + +8. **Processes** in processes + + - respawned For every server zone: -1. **Processing** in requests - * processing +1. **Processing** in requests + +- processing + +2. **Requests** in requests/s -2. **Requests** in requests/s - * requests + - requests -3. **Responses** in requests/s - * 1xx - * 2xx - * 3xx - * 4xx - * 5xx +3. **Responses** in requests/s -4. **Traffic** in kilobits/s - * received - * sent + - 1xx + - 2xx + - 3xx + - 4xx + - 5xx + +4. **Traffic** in kilobits/s + + - received + - sent For every upstream: -1. **Peers Requests** in requests/s - * peer name (dimension per peer) +1. **Peers Requests** in requests/s + + - peer name (dimension per peer) -2. **All Peers Responses** in responses/s - * 1xx - * 2xx - * 3xx - * 4xx - * 5xx +2. **All Peers Responses** in responses/s -3. **Peer Responses** in requests/s (for every peer) - * 1xx - * 2xx - * 3xx - * 4xx - * 5xx + - 1xx + - 2xx + - 3xx + - 4xx + - 5xx -4. **Peers Connections** in active - * peer name (dimension per peer) +3. **Peer Responses** in requests/s (for every peer) -5. **Peers Connections Usage** in percent - * peer name (dimension per peer) + - 1xx + - 2xx + - 3xx + - 4xx + - 5xx -6. **All Peers Traffic** in KB - * received - * sent +4. **Peers Connections** in active -7. **Peer Traffic** in KB/s (for every peer) - * received - * sent + - peer name (dimension per peer) -8. **Peer Timings** in ms (for every peer) - * header - * response +5. **Peers Connections Usage** in percent -9. **Memory Usage** in percent - * usage + - peer name (dimension per peer) + +6. **All Peers Traffic** in KB + + - received + - sent + +7. **Peer Traffic** in KB/s (for every peer) + + - received + - sent + +8. **Peer Timings** in ms (for every peer) + + - header + - response + +9. **Memory Usage** in percent + + - usage 10. **Peers Status** in state - * peer name (dimension per peer) + + - peer name (dimension per peer) 11. **Peers Total Downtime** in seconds - * peer name (dimension per peer) + + - peer name (dimension per peer) For every cache: -1. **Traffic** in KB - * served - * written - * bypass +1. **Traffic** in KB + + - served + - written + - bypass + +2. **Memory Usage** in percent -2. **Memory Usage** in percent - * usage + - usage -### configuration +## configuration Needs only `url` to server's `status` @@ -124,4 +149,4 @@ Without configuration, module fail to start. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/nsd/README.md b/collectors/python.d.plugin/nsd/README.md index b118657d2..61bc5c458 100644 --- a/collectors/python.d.plugin/nsd/README.md +++ b/collectors/python.d.plugin/nsd/README.md @@ -3,54 +3,60 @@ Module uses the `nsd-control stats_noreset` command to provide `nsd` statistics. **Requirements:** - * Version of `nsd` must be 4.0+ - * Netdata must have permissions to run `nsd-control stats_noreset` + +- Version of `nsd` must be 4.0+ +- Netdata must have permissions to run `nsd-control stats_noreset` It produces: -1. **Queries** - * queries - -2. **Zones** - * master - * slave - -3. **Protocol** - * udp - * udp6 - * tcp - * tcp6 - -4. **Query Type** - * A - * NS - * CNAME - * SOA - * PTR - * HINFO - * MX - * NAPTR - * TXT - * AAAA - * SRV - * ANY - -5. **Transfer** - * NOTIFY - * AXFR - -6. **Return Code** - * NOERROR - * FORMERR - * SERVFAIL - * NXDOMAIN - * NOTIMP - * REFUSED - * YXDOMAIN +1. **Queries** + + - queries + +2. **Zones** + + - master + - slave + +3. **Protocol** + + - udp + - udp6 + - tcp + - tcp6 + +4. **Query Type** + + - A + - NS + - CNAME + - SOA + - PTR + - HINFO + - MX + - NAPTR + - TXT + - AAAA + - SRV + - ANY + +5. **Transfer** + + - NOTIFY + - AXFR + +6. **Return Code** + - NOERROR + - FORMERR + - SERVFAIL + - NXDOMAIN + - NOTIMP + - REFUSED + - YXDOMAIN Configuration is not needed. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/ntpd/README.md b/collectors/python.d.plugin/ntpd/README.md index d33fd877a..d4d0dc60d 100644 --- a/collectors/python.d.plugin/ntpd/README.md +++ b/collectors/python.d.plugin/ntpd/README.md @@ -3,8 +3,9 @@ Module monitors the system variables of the local `ntpd` daemon (optional incl. variables of the polled peers) using the NTP Control Message Protocol via UDP socket, similar to `ntpq`, the [standard NTP query program](http://doc.ntp.org/current-stable/ntpq.html). **Requirements:** - * Version: `NTPv4` - * Local interrogation allowed in `/etc/ntp.conf` (default): + +- Version: `NTPv4` +- Local interrogation allowed in `/etc/ntp.conf` (default): ``` # Local users may interrogate the ntp server more closely. @@ -14,31 +15,33 @@ restrict ::1 It produces: -1. system - * offset - * jitter - * frequency - * delay - * dispersion - * stratum - * tc - * precision - -2. peers - * offset - * delay - * dispersion - * jitter - * rootdelay - * rootdispersion - * stratum - * hmode - * pmode - * hpoll - * ppoll - * precision - -**configuration** +1. system + + - offset + - jitter + - frequency + - delay + - dispersion + - stratum + - tc + - precision + +2. peers + + - offset + - delay + - dispersion + - jitter + - rootdelay + - rootdispersion + - stratum + - hmode + - pmode + - hpoll + - ppoll + - precision + +## configuration Sample: @@ -70,4 +73,4 @@ If no configuration is given, module will attempt to connect to `ntpd` on `::1:1 --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/nvidia_smi/README.md b/collectors/python.d.plugin/nvidia_smi/README.md index 48b611951..71e3e2889 100644 --- a/collectors/python.d.plugin/nvidia_smi/README.md +++ b/collectors/python.d.plugin/nvidia_smi/README.md @@ -4,37 +4,39 @@ This module monitors the `nvidia-smi` cli tool. **Requirements and Notes:** - * You must have the `nvidia-smi` tool installed and your NVIDIA GPU(s) must support the tool. Mostly the newer high end models used for AI / ML and Crypto or Pro range, read more about [nvidia_smi](https://developer.nvidia.com/nvidia-system-management-interface). +- You must have the `nvidia-smi` tool installed and your NVIDIA GPU(s) must support the tool. Mostly the newer high end models used for AI / ML and Crypto or Pro range, read more about [nvidia_smi](https://developer.nvidia.com/nvidia-system-management-interface). - * You must enable this plugin as its disabled by default due to minor performance issues. +- You must enable this plugin as its disabled by default due to minor performance issues. - * On some systems when the GPU is idle the `nvidia-smi` tool unloads and there is added latency again when it is next queried. If you are running GPUs under constant workload this isn't likely to be an issue. +- On some systems when the GPU is idle the `nvidia-smi` tool unloads and there is added latency again when it is next queried. If you are running GPUs under constant workload this isn't likely to be an issue. - * Currently the `nvidia-smi` tool is being queried via cli. Updating the plugin to use the nvidia c/c++ API directly should resolve this issue. See discussion here: https://github.com/netdata/netdata/pull/4357 +- Currently the `nvidia-smi` tool is being queried via cli. Updating the plugin to use the nvidia c/c++ API directly should resolve this issue. See discussion here: <https://github.com/netdata/netdata/pull/4357> - * Contributions are welcome. +- Contributions are welcome. - * Make sure `netdata` user can execute `/usr/bin/nvidia-smi` or wherever your binary is. +- Make sure `netdata` user can execute `/usr/bin/nvidia-smi` or wherever your binary is. - * `poll_seconds` is how often in seconds the tool is polled for as an integer. +- `poll_seconds` is how often in seconds the tool is polled for as an integer. It produces: -1. Per GPU - * GPU utilization - * memory allocation - * memory utilization - * fan speed - * power usage - * temperature - * clock speed - * PCI bandwidth +1. Per GPU -### configuration + - GPU utilization + - memory allocation + - memory utilization + - fan speed + - power usage + - temperature + - clock speed + - PCI bandwidth + +## configuration Sample: ```yaml poll_seconds: 1 ``` -[]() + +[](<>) diff --git a/collectors/python.d.plugin/openldap/README.md b/collectors/python.d.plugin/openldap/README.md index 629cc1539..f1f9de581 100644 --- a/collectors/python.d.plugin/openldap/README.md +++ b/collectors/python.d.plugin/openldap/README.md @@ -4,42 +4,48 @@ This module provides statistics information from openldap (slapd) server. Statistics are taken from LDAP monitoring interface. Manual page, slapd-monitor(5) is available. **Requirement:** -* Follow instructions from https://www.openldap.org/doc/admin24/monitoringslapd.html to activate monitoring interface. -* Install python ldap module `pip install ldap` or `yum install python-ldap` -* Modify openldap.conf with your credentials + +- Follow instructions from <https://www.openldap.org/doc/admin24/monitoringslapd.html> to activate monitoring interface. +- Install python ldap module `pip install ldap` or `yum install python-ldap` +- Modify openldap.conf with your credentials ### Module gives information with following charts: -1. **connections** - * total connections number +1. **connections** + + - total connections number + +2. **Bytes** + + - sent + +3. **operations** + + - completed + - initiated -2. **Bytes** - * sent +4. **referrals** -3. **operations** - * completed - * initiated + - sent -4. **referrals** - * sent +5. **entries** -5. **entries** - * sent + - sent -6. **ldap operations** - * bind - * search - * unbind - * add - * delete - * modify - * compare +6. **ldap operations** -7. **waiters** - * read - * write + - bind + - search + - unbind + - add + - delete + - modify + - compare +7. **waiters** + - read + - write ### configuration @@ -56,4 +62,4 @@ openldap: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/oracledb/README.md b/collectors/python.d.plugin/oracledb/README.md index 2e5972a05..708f261d9 100644 --- a/collectors/python.d.plugin/oracledb/README.md +++ b/collectors/python.d.plugin/oracledb/README.md @@ -3,46 +3,48 @@ Module monitor oracledb performance and health metrics. **Requirements:** - - `cx_Oracle` package. - - Oracle Client (using `cx_Oracle` requires Oracle Client libraries to be installed). + +- `cx_Oracle` package. +- Oracle Client (using `cx_Oracle` requires Oracle Client libraries to be installed). It produces following charts: - - session activity - - Session Count - - Session Limit Usage - - Logons - - disk activity - - Physical Disk Reads/Writes - - Sorts On Disk - - Full Table Scans - - database and buffer activity - - Database Wait Time Ratio - - Shared Pool Free Memory - - In-Memory Sorts Ratio - - SQL Service Response Time - - User Rollbacks - - Enqueue Timeouts - - cache - - Cache Hit Ratio - - Global Cache Blocks Events - - activities - - Activities - - wait time - - Wait Time - - tablespace - - Size - - Usage - - Usage In Percent - -### prerequisite + +- session activity + - Session Count + - Session Limit Usage + - Logons +- disk activity + - Physical Disk Reads/Writes + - Sorts On Disk + - Full Table Scans +- database and buffer activity + - Database Wait Time Ratio + - Shared Pool Free Memory + - In-Memory Sorts Ratio + - SQL Service Response Time + - User Rollbacks + - Enqueue Timeouts +- cache + - Cache Hit Ratio + - Global Cache Blocks Events +- activities + - Activities +- wait time + - Wait Time +- tablespace + - Size + - Usage + - Usage In Percent + +## prerequisite To use the Oracle module do the following: -1. Install `cx_Oracle` package ([link](https://cx-oracle.readthedocs.io/en/latest/installation.html#install-cx-oracle)). +1. Install `cx_Oracle` package ([link](https://cx-oracle.readthedocs.io/en/latest/installation.html#install-cx-oracle)). -2. Install Oracle Client libraries ([link](https://cx-oracle.readthedocs.io/en/latest/installation.html#install-oracle-client)). +2. Install Oracle Client libraries ([link](https://cx-oracle.readthedocs.io/en/latest/installation.html#install-oracle-client)). -3. Create a read-only netdata user with proper access to your Oracle Database Server. +3. Create a read-only `netdata` user with proper access to your Oracle Database Server. Connect to your Oracle database with an administrative user and execute: @@ -53,8 +55,7 @@ CREATE USER netdata IDENTIFIED BY <PASSWORD>; GRANT CONNECT TO netdata; GRANT SELECT_CATALOG_ROLE TO netdata; - -``` +``` ### configuration @@ -74,4 +75,4 @@ remote: All parameters are required. Without them module will fail to start. -[]() +[](<>) diff --git a/collectors/python.d.plugin/ovpn_status_log/README.md b/collectors/python.d.plugin/ovpn_status_log/README.md index bcd1f00e3..053e3f0de 100644 --- a/collectors/python.d.plugin/ovpn_status_log/README.md +++ b/collectors/python.d.plugin/ovpn_status_log/README.md @@ -4,23 +4,25 @@ Module monitor openvpn-status log file. **Requirements:** - * If you are running multiple OpenVPN instances out of the same directory, MAKE SURE TO EDIT DIRECTIVES which create output files - so that multiple instances do not overwrite each other's output files. +- If you are running multiple OpenVPN instances out of the same directory, MAKE SURE TO EDIT DIRECTIVES which create output files + so that multiple instances do not overwrite each other's output files. - * Make sure NETDATA USER CAN READ openvpn-status.log +- Make sure NETDATA USER CAN READ openvpn-status.log - * Update_every interval MUST MATCH interval on which OpenVPN writes operational status to log file. +- Update_every interval MUST MATCH interval on which OpenVPN writes operational status to log file. It produces: -1. **Users** OpenVPN active users - * users +1. **Users** OpenVPN active users -2. **Traffic** OpenVPN overall bandwidth usage in kilobit/s - * in - * out + - users -### configuration +2. **Traffic** OpenVPN overall bandwidth usage in kilobit/s + + - in + - out + +## configuration Sample: @@ -31,4 +33,4 @@ default --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/phpfpm/README.md b/collectors/python.d.plugin/phpfpm/README.md index d3aa85a7c..5f8284330 100644 --- a/collectors/python.d.plugin/phpfpm/README.md +++ b/collectors/python.d.plugin/phpfpm/README.md @@ -3,24 +3,28 @@ This module will monitor one or more php-fpm instances depending on configuration. **Requirements:** - * php-fpm with enabled `status` page - * access to `status` page via web server + +- php-fpm with enabled `status` page +- access to `status` page via web server It produces following charts: -1. **Active Connections** - * active - * maxActive - * idle +1. **Active Connections** + + - active + - maxActive + - idle + +2. **Requests** in requests/s + + - requests -2. **Requests** in requests/s - * requests +3. **Performance** -3. **Performance** - * reached - * slow + - reached + - slow -### configuration +## configuration Needs only `url` to server's `status` @@ -38,4 +42,4 @@ Without configuration, module attempts to connect to `http://localhost/status` --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/portcheck/README.md b/collectors/python.d.plugin/portcheck/README.md index 8f289c8de..2bbea10c7 100644 --- a/collectors/python.d.plugin/portcheck/README.md +++ b/collectors/python.d.plugin/portcheck/README.md @@ -4,18 +4,19 @@ Module monitors a remote TCP service. Following charts are drawn per host: -1. **Latency** ms - * Time required to connect to a TCP port. - Displays latency in 0.1 ms resolution. If the connection failed, the value is missing. +1. **Latency** ms -2. **Status** boolean - * Connection successful - * Could not create socket: possible DNS problems - * Connection refused: port not listening or blocked - * Connection timed out: host or port unreachable + - Time required to connect to a TCP port. + Displays latency in 0.1 ms resolution. If the connection failed, the value is missing. +2. **Status** boolean -### configuration + - Connection successful + - Could not create socket: possible DNS problems + - Connection refused: port not listening or blocked + - Connection timed out: host or port unreachable + +## configuration ```yaml server: @@ -27,11 +28,11 @@ server: ### notes - * The error chart is intended for alarms, badges or for access via API. - * A system/service/firewall might block netdata's access if a portscan or - similar is detected. - * Currently, the accuracy of the latency is low and should be used as reference only. +- The error chart is intended for alarms, badges or for access via API. +- A system/service/firewall might block Netdata's access if a portscan or + similar is detected. +- Currently, the accuracy of the latency is low and should be used as reference only. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/postfix/README.md b/collectors/python.d.plugin/postfix/README.md index e2147ac91..5d2822c1d 100644 --- a/collectors/python.d.plugin/postfix/README.md +++ b/collectors/python.d.plugin/postfix/README.md @@ -4,14 +4,16 @@ Simple module executing `postfix -p` to grab postfix queue. It produces only two charts: -1. **Postfix Queue Emails** - * emails +1. **Postfix Queue Emails** -2. **Postfix Queue Emails Size** in KB - * size + - emails + +2. **Postfix Queue Emails Size** in KB + + - size Configuration is not needed. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/postgres/README.md b/collectors/python.d.plugin/postgres/README.md index 052de94f4..29dd85a5c 100644 --- a/collectors/python.d.plugin/postgres/README.md +++ b/collectors/python.d.plugin/postgres/README.md @@ -4,50 +4,60 @@ Module monitors one or more postgres servers. **Requirements:** - * `python-psycopg2` package. You have to install it manually. +- `python-psycopg2` package. You have to install it manually. Following charts are drawn: -1. **Database size** MB - * size +1. **Database size** MB -2. **Current Backend Processes** processes - * active + - size -3. **Write-Ahead Logging Statistics** files/s - * total - * ready - * done +2. **Current Backend Processes** processes -4. **Checkpoints** writes/s - * scheduled - * requested + - active -5. **Current connections to db** count - * connections +3. **Write-Ahead Logging Statistics** files/s -6. **Tuples returned from db** tuples/s - * sequential - * bitmap + - total + - ready + - done -7. **Tuple reads from db** reads/s - * disk - * cache +4. **Checkpoints** writes/s -8. **Transactions on db** transactions/s - * committed - * rolled back + - scheduled + - requested -9. **Tuples written to db** writes/s - * inserted - * updated - * deleted - * conflicts +5. **Current connections to db** count + + - connections + +6. **Tuples returned from db** tuples/s + + - sequential + - bitmap + +7. **Tuple reads from db** reads/s + + - disk + - cache + +8. **Transactions on db** transactions/s + + - committed + - rolled back + +9. **Tuples written to db** writes/s + + - inserted + - updated + - deleted + - conflicts 10. **Locks on db** count per type - * locks -### configuration + - locks + +## configuration For all available options please see module [configuration file](postgres.conf). @@ -69,4 +79,4 @@ When no configuration file is found, module tries to connect to TCP/IP socket: ` --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/powerdns/README.md b/collectors/python.d.plugin/powerdns/README.md index 61aa5f6b7..ac6e12f3a 100644 --- a/collectors/python.d.plugin/powerdns/README.md +++ b/collectors/python.d.plugin/powerdns/README.md @@ -4,67 +4,78 @@ Module monitor powerdns performance and health metrics. Powerdns charts: -1. **Queries and Answers** - * udp-queries - * udp-answers - * tcp-queries - * tcp-answers - -2. **Cache Usage** - * query-cache-hit - * query-cache-miss - * packetcache-hit - * packetcache-miss - -3. **Cache Size** - * query-cache-size - * packetcache-size - * key-cache-size - * meta-cache-size - -4. **Latency** - * latency +1. **Queries and Answers** + + - udp-queries + - udp-answers + - tcp-queries + - tcp-answers + +2. **Cache Usage** + + - query-cache-hit + - query-cache-miss + - packetcache-hit + - packetcache-miss + +3. **Cache Size** + + - query-cache-size + - packetcache-size + - key-cache-size + - meta-cache-size + +4. **Latency** + + - latency Powerdns Recursor charts: - 1. **Questions In** - * questions - * ipv6-questions - * tcp-queries - -2. **Questions Out** - * all-outqueries - * ipv6-outqueries - * tcp-outqueries - * throttled-outqueries - -3. **Answer Times** - * answers-slow - * answers0-1 - * answers1-10 - * answers10-100 - * answers100-1000 - -4. **Timeouts** - * outgoing-timeouts - * outgoing4-timeouts - * outgoing6-timeouts - -5. **Drops** - * over-capacity-drops - -6. **Cache Usage** - * cache-hits - * cache-misses - * packetcache-hits - * packetcache-misses - -7. **Cache Size** - * cache-entries - * packetcache-entries - * negcache-entries - -### configuration +1. **Questions In** + + - questions + - ipv6-questions + - tcp-queries + +2. **Questions Out** + + - all-outqueries + - ipv6-outqueries + - tcp-outqueries + - throttled-outqueries + +3. **Answer Times** + + - answers-slow + - answers0-1 + - answers1-10 + - answers10-100 + - answers100-1000 + +4. **Timeouts** + + - outgoing-timeouts + - outgoing4-timeouts + - outgoing6-timeouts + +5. **Drops** + + - over-capacity-drops + +6. **Cache Usage** + + - cache-hits + - cache-misses + - packetcache-hits + - packetcache-misses + +7. **Cache Size** + + - cache-entries + - packetcache-entries + - negcache-entries + +## configuration ```yaml local: @@ -76,4 +87,4 @@ local: --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/proxysql/README.md b/collectors/python.d.plugin/proxysql/README.md index 6e5a2127f..23a67751a 100644 --- a/collectors/python.d.plugin/proxysql/README.md +++ b/collectors/python.d.plugin/proxysql/README.md @@ -4,49 +4,68 @@ This module monitors proxysql backend and frontend performance metrics. It produces: -1. **Connections (frontend)** - * connected: number of frontend connections currently connected - * aborted: number of frontend connections aborted due to invalid credential or max_connections reached - * non_idle: number of frontend connections that are not currently idle - * created: number of frontend connections created -2. **Questions (frontend)** - * questions: total number of queries sent from frontends - * slow_queries: number of queries that ran for longer than the threshold in milliseconds defined in global variable `mysql-long_query_time` -3. **Overall Bandwith (backends)** - * in - * out -4. **Status (backends)** - * Backends - * `1=ONLINE`: backend server is fully operational - * `2=SHUNNED`: backend sever is temporarily taken out of use because of either too many connection errors in a time that was too short, or replication lag exceeded the allowed threshold - * `3=OFFLINE_SOFT`: when a server is put into OFFLINE_SOFT mode, new incoming connections aren't accepted anymore, while the existing connections are kept until they became inactive. In other words, connections are kept in use until the current transaction is completed. This allows to gracefully detach a backend - * `4=OFFLINE_HARD`: when a server is put into OFFLINE_HARD mode, the existing connections are dropped, while new incoming connections aren't accepted either. This is equivalent to deleting the server from a hostgroup, or temporarily taking it out of the hostgroup for maintenance work - * `-1`: Unknown status -5. **Bandwith (backends)** - * Backends - * in - * out -6. **Queries (backends)** - * Backends - * queries -7. **Latency (backends)** - * Backends - * ping time -8. **Pool connections (backends)** - * Backends - * Used: The number of connections are currently used by ProxySQL for sending queries to the backend server. - * Free: The number of connections are currently free. - * Established/OK: The number of connections were established successfully. - * Error: The number of connections weren't established successfully. -9. **Commands** - * Commands - * Count - * Duration (Total duration for each command) +1. **Connections (frontend)** + + - connected: number of frontend connections currently connected + - aborted: number of frontend connections aborted due to invalid credential or max_connections reached + - non_idle: number of frontend connections that are not currently idle + - created: number of frontend connections created + +2. **Questions (frontend)** + + - questions: total number of queries sent from frontends + - slow_queries: number of queries that ran for longer than the threshold in milliseconds defined in global variable `mysql-long_query_time` + +3. **Overall Bandwith (backends)** + + - in + - out + +4. **Status (backends)** + + - Backends + - `1=ONLINE`: backend server is fully operational + - `2=SHUNNED`: backend sever is temporarily taken out of use because of either too many connection errors in a time that was too short, or replication lag exceeded the allowed threshold + - `3=OFFLINE_SOFT`: when a server is put into OFFLINE_SOFT mode, new incoming connections aren't accepted anymore, while the existing connections are kept until they became inactive. In other words, connections are kept in use until the current transaction is completed. This allows to gracefully detach a backend + - `4=OFFLINE_HARD`: when a server is put into OFFLINE_HARD mode, the existing connections are dropped, while new incoming connections aren't accepted either. This is equivalent to deleting the server from a hostgroup, or temporarily taking it out of the hostgroup for maintenance work + - `-1`: Unknown status + +5. **Bandwith (backends)** + + - Backends + - in + - out + +6. **Queries (backends)** + + - Backends + - queries + +7. **Latency (backends)** + + - Backends + - ping time + +8. **Pool connections (backends)** + + - Backends + - Used: The number of connections are currently used by ProxySQL for sending queries to the backend server. + - Free: The number of connections are currently free. + - Established/OK: The number of connections were established successfully. + - Error: The number of connections weren't established successfully. + +9. **Commands** + + - Commands + - Count + - Duration (Total duration for each command) + 10. **Commands Histogram** - * Commands - * 100us, 500us, ..., 10s, inf: the total number of commands of the given type which executed within the specified time limit and the previous one. -### configuration + - Commands + - 100us, 500us, ..., 10s, inf: the total number of commands of the given type which executed within the specified time limit and the previous one. + +## configuration ```yaml tcpipv4: @@ -61,4 +80,4 @@ If no configuration is given, module will fail to run. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/puppet/README.md b/collectors/python.d.plugin/puppet/README.md index b97eb70c5..295db0140 100644 --- a/collectors/python.d.plugin/puppet/README.md +++ b/collectors/python.d.plugin/puppet/README.md @@ -4,21 +4,27 @@ Monitor status of Puppet Server and Puppet DB. Following charts are drawn: -1. **JVM Heap** - * committed (allocated from OS) - * used (actual use) -2. **JVM Non-Heap** - * committed (allocated from OS) - * used (actual use) -3. **CPU Usage** - * execution - * GC (taken by garbage collection) -4. **File Descriptors** - * max - * used - - -### configuration +1. **JVM Heap** + + - committed (allocated from OS) + - used (actual use) + +2. **JVM Non-Heap** + + - committed (allocated from OS) + - used (actual use) + +3. **CPU Usage** + + - execution + - GC (taken by garbage collection) + +4. **File Descriptors** + + - max + - used + +## configuration ```yaml puppetdb: @@ -36,12 +42,12 @@ When no configuration is given, module uses `https://fqdn.example.com:8140`. ### notes -* Exact Fully Qualified Domain Name of the node should be used. -* Usually Puppet Server/DB startup time is VERY long. So, there should - be quite reasonable retry count. -* Secure PuppetDB config may require client certificate. Not applies - to default PuppetDB configuration though. +- Exact Fully Qualified Domain Name of the node should be used. +- Usually Puppet Server/DB startup time is VERY long. So, there should + be quite reasonable retry count. +- Secure PuppetDB config may require client certificate. Not applies + to default PuppetDB configuration though. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/python.d.plugin b/collectors/python.d.plugin/python.d.plugin new file mode 100644 index 000000000..468df13a4 --- /dev/null +++ b/collectors/python.d.plugin/python.d.plugin @@ -0,0 +1,733 @@ +#!/usr/bin/env bash +'''':; +if [[ "$OSTYPE" == "darwin"* ]]; then + export OBJC_DISABLE_INITIALIZE_FORK_SAFETY=YES +fi +exec "$(command -v python || command -v python3 || command -v python2 || +echo "ERROR python IS NOT AVAILABLE IN THIS SYSTEM")" "$0" "$@" # ''' + +# -*- coding: utf-8 -*- +# Description: +# Author: Pawel Krupa (paulfantom) +# Author: Ilya Mashchenko (l2isbad) +# SPDX-License-Identifier: GPL-3.0-or-later + + +import collections +import copy +import gc +import multiprocessing +import os +import re +import sys +import time +import threading +import types + +PY_VERSION = sys.version_info[:2] + +if PY_VERSION > (3, 1): + from importlib.machinery import SourceFileLoader +else: + from imp import load_source as SourceFileLoader + + +ENV_NETDATA_USER_CONFIG_DIR = 'NETDATA_USER_CONFIG_DIR' +ENV_NETDATA_STOCK_CONFIG_DIR = 'NETDATA_STOCK_CONFIG_DIR' +ENV_NETDATA_PLUGINS_DIR = 'NETDATA_PLUGINS_DIR' +ENV_NETDATA_UPDATE_EVERY = 'NETDATA_UPDATE_EVERY' + + +def dirs(): + user_config = os.getenv( + ENV_NETDATA_USER_CONFIG_DIR, + '/etc/netdata', + ) + stock_config = os.getenv( + ENV_NETDATA_STOCK_CONFIG_DIR, + '/usr/lib/netdata/conf.d', + ) + modules_user_config = os.path.join(user_config, 'python.d') + modules_stock_config = os.path.join(stock_config, 'python.d') + + modules = os.path.abspath( + os.getenv( + ENV_NETDATA_PLUGINS_DIR, + os.path.dirname(__file__), + ) + '/../python.d' + ) + pythond_packages = os.path.join(modules, 'python_modules') + + return collections.namedtuple( + 'Dirs', + [ + 'user_config', + 'stock_config', + 'modules_user_config', + 'modules_stock_config', + 'modules', + 'pythond_packages', + ] + )( + user_config, + stock_config, + modules_user_config, + modules_stock_config, + modules, + pythond_packages, + ) + + +DIRS = dirs() + +sys.path.append(DIRS.pythond_packages) + + +from bases.collection import safe_print +from bases.loggers import PythonDLogger +from bases.loaders import load_config + +try: + from collections import OrderedDict +except ImportError: + from third_party.ordereddict import OrderedDict + + +END_TASK_MARKER = None + +IS_ATTY = sys.stdout.isatty() + +PLUGIN_CONF_FILE = 'python.d.conf' + +MODULE_SUFFIX = '.chart.py' + +OBSOLETED_MODULES = ( + 'apache_cache', # replaced by web_log + 'cpuidle', # rewritten in C + 'cpufreq', # rewritten in C + 'gunicorn_log', # replaced by web_log + 'linux_power_supply', # rewritten in C + 'nginx_log', # replaced by web_log + 'mdstat', # rewritten in C + 'sslcheck', # memory leak bug https://github.com/netdata/netdata/issues/5624 +) + + +AVAILABLE_MODULES = [ + m[:-len(MODULE_SUFFIX)] for m in sorted(os.listdir(DIRS.modules)) + if m.endswith(MODULE_SUFFIX) and m[:-len(MODULE_SUFFIX)] not in OBSOLETED_MODULES +] + +PLUGIN_BASE_CONF = { + 'enabled': True, + 'default_run': True, + 'gc_run': True, + 'gc_interval': 300, +} + +JOB_BASE_CONF = { + 'update_every': os.getenv(ENV_NETDATA_UPDATE_EVERY, 1), + 'priority': 60000, + 'autodetection_retry': 0, + 'chart_cleanup': 10, + 'penalty': True, + 'name': str(), +} + + +def heartbeat(): + if IS_ATTY: + return + safe_print('\n') + + +class HeartBeat(threading.Thread): + def __init__(self, every): + threading.Thread.__init__(self) + self.daemon = True + self.every = every + + def run(self): + while True: + time.sleep(self.every) + heartbeat() + + +def load_module(name): + abs_path = os.path.join(DIRS.modules, '{0}{1}'.format(name, MODULE_SUFFIX)) + module = SourceFileLoader(name, abs_path) + if isinstance(module, types.ModuleType): + return module + return module.load_module() + + +def multi_path_find(name, paths): + for path in paths: + abs_name = os.path.join(path, name) + if os.path.isfile(abs_name): + return abs_name + return '' + + +Task = collections.namedtuple( + 'Task', + [ + 'module_name', + 'explicitly_enabled', + ], +) + +Result = collections.namedtuple( + 'Result', + [ + 'module_name', + 'jobs_configs', + ], +) + + +class ModuleChecker(multiprocessing.Process): + def __init__( + self, + task_queue, + result_queue, + ): + multiprocessing.Process.__init__(self) + self.log = PythonDLogger() + self.log.job_name = 'checker' + self.task_queue = task_queue + self.result_queue = result_queue + + def run(self): + self.log.info('starting...') + HeartBeat(1).start() + while self.run_once(): + pass + self.log.info('terminating...') + + def run_once(self): + task = self.task_queue.get() + + if task is END_TASK_MARKER: + # TODO: find better solution, understand why heartbeat thread doesn't work + heartbeat() + self.task_queue.task_done() + self.result_queue.put(END_TASK_MARKER) + return False + + result = self.do_task(task) + if result: + self.result_queue.put(result) + self.task_queue.task_done() + + return True + + def do_task(self, task): + self.log.info("{0} : checking".format(task.module_name)) + + # LOAD SOURCE + module = Module(task.module_name) + try: + module.load_source() + except Exception as error: + self.log.warning("{0} : error on loading source : {1}, skipping module".format( + task.module_name, + error, + )) + return None + else: + self.log.info("{0} : source successfully loaded".format(task.module_name)) + + if module.is_disabled_by_default() and not task.explicitly_enabled: + self.log.info("{0} : disabled by default".format(task.module_name)) + return None + + # LOAD CONFIG + paths = [ + DIRS.modules_user_config, + DIRS.modules_stock_config, + ] + + conf_abs_path = multi_path_find( + name='{0}.conf'.format(task.module_name), + paths=paths, + ) + + if conf_abs_path: + self.log.info("{0} : found config file '{1}'".format(task.module_name, conf_abs_path)) + try: + module.load_config(conf_abs_path) + except Exception as error: + self.log.warning("{0} : error on loading config : {1}, skipping module".format( + task.module_name, error)) + return None + else: + self.log.info("{0} : config was not found in '{1}', using default 1 job config".format( + task.module_name, paths)) + + # CHECK JOBS + jobs = module.create_jobs() + self.log.info("{0} : created {1} job(s) from the config".format(task.module_name, len(jobs))) + + successful_jobs_configs = list() + for job in jobs: + if job.autodetection_retry() > 0: + successful_jobs_configs.append(job.config) + self.log.info("{0}[{1}]: autodetection job, will be checked in main".format(task.module_name, job.name)) + continue + + try: + job.init() + except Exception as error: + self.log.warning("{0}[{1}] : unhandled exception on init : {2}, skipping the job)".format( + task.module_name, job.name, error)) + continue + + try: + ok = job.check() + except Exception as error: + self.log.warning("{0}[{1}] : unhandled exception on check : {2}, skipping the job".format( + task.module_name, job.name, error)) + continue + + if not ok: + self.log.info("{0}[{1}] : check failed, skipping the job".format(task.module_name, job.name)) + continue + + self.log.info("{0}[{1}] : check successful".format(task.module_name, job.name)) + + job.config['autodetection_retry'] = job.config['update_every'] + successful_jobs_configs.append(job.config) + + if not successful_jobs_configs: + self.log.info("{0} : all jobs failed, skipping module".format(task.module_name)) + return None + + return Result(module.source.__name__, successful_jobs_configs) + + +class JobConf(OrderedDict): + def __init__(self, *args): + OrderedDict.__init__(self, *args) + + def set_defaults_from_module(self, module): + for k in [k for k in JOB_BASE_CONF if hasattr(module, k)]: + self[k] = getattr(module, k) + + def set_defaults_from_config(self, module_config): + for k in [k for k in JOB_BASE_CONF if k in module_config]: + self[k] = module_config[k] + + def set_job_name(self, name): + self['job_name'] = re.sub(r'\s+', '_', name) + + def set_override_name(self, name): + self['override_name'] = re.sub(r'\s+', '_', name) + + def as_dict(self): + return copy.deepcopy(OrderedDict(self)) + + +class Job: + def __init__( + self, + service, + module_name, + config, + ): + self.service = service + self.config = config + self.module_name = module_name + self.name = config['job_name'] + self.override_name = config['override_name'] + self.wrapped = None + + def init(self): + self.wrapped = self.service(configuration=self.config.as_dict()) + + def check(self): + return self.wrapped.check() + + def post_check(self, min_update_every): + if self.wrapped.update_every < min_update_every: + self.wrapped.update_every = min_update_every + + def create(self): + return self.wrapped.create() + + def autodetection_retry(self): + return self.config['autodetection_retry'] + + def run(self): + self.wrapped.run() + + +class Module: + def __init__(self, name): + self.name = name + self.source = None + self.config = dict() + + def is_disabled_by_default(self): + return bool(getattr(self.source, 'disabled_by_default', False)) + + def load_source(self): + self.source = load_module(self.name) + + def load_config(self, abs_path): + self.config = load_config(abs_path) or dict() + + def gather_jobs_configs(self): + job_names = [v for v in self.config if isinstance(self.config[v], dict)] + + if len(job_names) == 0: + job_conf = JobConf(JOB_BASE_CONF) + job_conf.set_defaults_from_module(self.source) + job_conf.update(self.config) + job_conf.set_job_name(self.name) + job_conf.set_override_name(job_conf.pop('name')) + return [job_conf] + + configs = list() + for job_name in job_names: + raw_job_conf = self.config[job_name] + job_conf = JobConf(JOB_BASE_CONF) + job_conf.set_defaults_from_module(self.source) + job_conf.set_defaults_from_config(self.config) + job_conf.update(raw_job_conf) + job_conf.set_job_name(job_name) + job_conf.set_override_name(job_conf.pop('name')) + configs.append(job_conf) + + return configs + + def create_jobs(self, jobs_conf=None): + return [Job(self.source.Service, self.name, conf) for conf in jobs_conf or self.gather_jobs_configs()] + + +class JobRunner(threading.Thread): + def __init__(self, job): + threading.Thread.__init__(self) + self.daemon = True + self.wrapped = job + + def run(self): + self.wrapped.run() + + +class PluginConf(dict): + def __init__(self, *args): + dict.__init__(self, *args) + + def is_module_enabled(self, module_name, explicit): + if module_name in self: + return self[module_name] + if explicit: + return False + return self['default_run'] + + +class Plugin: + def __init__( + self, + min_update_every=1, + modules_to_run=tuple(AVAILABLE_MODULES), + ): + self.log = PythonDLogger() + self.config = PluginConf(PLUGIN_BASE_CONF) + self.task_queue = multiprocessing.JoinableQueue() + self.result_queue = multiprocessing.JoinableQueue() + self.min_update_every = min_update_every + self.modules_to_run = modules_to_run + self.auto_detection_jobs = list() + self.tasks = list() + self.results = list() + self.checked_jobs = collections.defaultdict(list) + self.runs = 0 + + @staticmethod + def shutdown(): + safe_print('DISABLE') + exit(0) + + def run(self): + jobs = self.create_jobs() + if not jobs: + return + + for job in self.prepare_jobs(jobs): + self.log.info('{0}[{1}] : started in thread'.format(job.module_name, job.name)) + JobRunner(job).start() + + self.serve() + + def enqueue_tasks(self): + for task in self.tasks: + self.task_queue.put(task) + self.task_queue.put(END_TASK_MARKER) + + def dequeue_results(self): + while True: + result = self.result_queue.get() + self.result_queue.task_done() + if result is END_TASK_MARKER: + break + self.results.append(result) + + def load_config(self): + paths = [ + DIRS.user_config, + DIRS.stock_config, + ] + + self.log.info("checking for config in {0}".format(paths)) + abs_path = multi_path_find(name=PLUGIN_CONF_FILE, paths=paths) + if not abs_path: + self.log.warning('config was not found, using defaults') + return True + + self.log.info("config found, loading config '{0}'".format(abs_path)) + try: + config = load_config(abs_path) or dict() + except Exception as error: + self.log.error('error on loading config : {0}'.format(error)) + return False + + self.log.info('config successfully loaded') + self.config.update(config) + return True + + def setup(self): + self.log.info('starting setup') + if not self.load_config(): + return False + + if not self.config['enabled']: + self.log.info('disabled in configuration file') + return False + + for mod in self.modules_to_run: + if self.config.is_module_enabled(mod, False): + task = Task(mod, self.config.is_module_enabled(mod, True)) + self.tasks.append(task) + else: + self.log.info("{0} : disabled in configuration file".format(mod)) + + if not self.tasks: + self.log.info('no modules to run') + return False + + worker = ModuleChecker(self.task_queue, self.result_queue) + self.log.info('starting checker process ({0} module(s) to check)'.format(len(self.tasks))) + worker.start() + + # TODO: timeouts? + self.enqueue_tasks() + self.task_queue.join() + self.dequeue_results() + self.result_queue.join() + self.task_queue.close() + self.result_queue.close() + self.log.info('stopping checker process') + worker.join() + + if not self.results: + self.log.info('no modules to run') + return False + + self.log.info("setup complete, {0} active module(s) : '{1}'".format( + len(self.results), + [v.module_name for v in self.results]) + ) + + return True + + def create_jobs(self): + jobs = list() + for result in self.results: + module = Module(result.module_name) + try: + module.load_source() + except Exception as error: + self.log.warning("{0} : error on loading module source : {1}, skipping module".format( + result.module_name, error)) + continue + + module_jobs = module.create_jobs(result.jobs_configs) + self.log.info("{0} : created {1} job(s)".format(module.name, len(module_jobs))) + jobs.extend(module_jobs) + + return jobs + + def prepare_jobs(self, jobs): + prepared = list() + + for job in jobs: + check_name = job.override_name or job.name + if check_name in self.checked_jobs[job.module_name]: + self.log.info('{0}[{1}] : already served by another job, skipping the job'.format( + job.module_name, job.name)) + continue + + try: + job.init() + except Exception as error: + self.log.warning("{0}[{1}] : unhandled exception on init : {2}, skipping the job".format( + job.module_name, job.name, error)) + continue + + self.log.info("{0}[{1}] : init successful".format(job.module_name, job.name)) + + try: + ok = job.check() + except Exception as error: + self.log.warning("{0}[{1}] : unhandled exception on check : {2}, skipping the job".format( + job.module_name, job.name, error)) + continue + + if not ok: + self.log.info('{0}[{1}] : check failed'.format(job.module_name, job.name)) + if job.autodetection_retry() > 0: + self.log.info('{0}[{1}] : will recheck every {2} second(s)'.format( + job.module_name, job.name, job.autodetection_retry())) + self.auto_detection_jobs.append(job) + continue + + self.log.info('{0}[{1}] : check successful'.format(job.module_name, job.name)) + + job.post_check(int(self.min_update_every)) + + if not job.create(): + self.log.info('{0}[{1}] : create failed'.format(job.module_name, job.name)) + + self.checked_jobs[job.module_name].append(check_name) + prepared.append(job) + + return prepared + + def serve(self): + gc_run = self.config['gc_run'] + gc_interval = self.config['gc_interval'] + + while True: + self.runs += 1 + + # threads: main + heartbeat + if threading.active_count() <= 2 and not self.auto_detection_jobs: + return + + time.sleep(1) + + if gc_run and self.runs % gc_interval == 0: + v = gc.collect() + self.log.debug('GC collection run result: {0}'.format(v)) + + self.auto_detection_jobs = [job for job in self.auto_detection_jobs if not self.retry_job(job)] + + def retry_job(self, job): + stop_retrying = True + retry_later = False + + if self.runs % job.autodetection_retry() != 0: + return retry_later + + check_name = job.override_name or job.name + if check_name in self.checked_jobs[job.module_name]: + self.log.info("{0}[{1}]: already served by another job, give up on retrying".format( + job.module_name, job.name)) + return stop_retrying + + try: + ok = job.check() + except Exception as error: + self.log.warning("{0}[{1}] : unhandled exception on recheck : {2}, give up on retrying".format( + job.module_name, job.name, error)) + return stop_retrying + + if not ok: + self.log.info('{0}[{1}] : recheck failed, will retry in {2} second(s)'.format( + job.module_name, job.name, job.autodetection_retry())) + return retry_later + self.log.info('{0}[{1}] : recheck successful'.format(job.module_name, job.name)) + + if not job.create(): + return stop_retrying + + job.post_check(int(self.min_update_every)) + self.checked_jobs[job.module_name].append(check_name) + JobRunner(job).start() + + return stop_retrying + + +def parse_cmd(): + opts = sys.argv[:][1:] + debug = False + trace = False + update_every = 1 + modules_to_run = list() + + v = next((opt for opt in opts if opt.isdigit() and int(opt) >= 1), None) + if v: + update_every = v + opts.remove(v) + if 'debug' in opts: + debug = True + opts.remove('debug') + if 'trace' in opts: + trace = True + opts.remove('trace') + if opts: + modules_to_run = list(opts) + + return collections.namedtuple( + 'CMD', + [ + 'update_every', + 'debug', + 'trace', + 'modules_to_run', + ], + )( + update_every, + debug, + trace, + modules_to_run, + ) + + +def main(): + cmd = parse_cmd() + logger = PythonDLogger() + + if cmd.debug: + logger.logger.severity = 'DEBUG' + if cmd.trace: + logger.log_traceback = True + + logger.info('using python v{0}'.format(PY_VERSION[0])) + + unknown_modules = set(cmd.modules_to_run) - set(AVAILABLE_MODULES) + if unknown_modules: + logger.error('unknown modules : {0}'.format(sorted(list(unknown_modules)))) + safe_print('DISABLE') + return + + plugin = Plugin( + cmd.update_every, + cmd.modules_to_run or AVAILABLE_MODULES, + ) + + HeartBeat(1).start() + + if not plugin.setup(): + safe_print('DISABLE') + return + + plugin.run() + logger.info('exiting from main...') + plugin.shutdown() + + +if __name__ == '__main__': + main() diff --git a/collectors/python.d.plugin/rabbitmq/README.md b/collectors/python.d.plugin/rabbitmq/README.md index 4ac606057..346cc23f7 100644 --- a/collectors/python.d.plugin/rabbitmq/README.md +++ b/collectors/python.d.plugin/rabbitmq/README.md @@ -4,42 +4,51 @@ Module monitor rabbitmq performance and health metrics. Following charts are drawn: -1. **Queued Messages** - * ready - * unacknowledged +1. **Queued Messages** -2. **Message Rates** - * ack - * redelivered - * deliver - * publish + - ready + - unacknowledged -3. **Global Counts** - * channels - * consumers - * connections - * queues - * exchanges +2. **Message Rates** -4. **File Descriptors** - * used descriptors + - ack + - redelivered + - deliver + - publish -5. **Socket Descriptors** - * used descriptors +3. **Global Counts** -6. **Erlang processes** - * used processes + - channels + - consumers + - connections + - queues + - exchanges -7. **Erlang run queue** - * Erlang run queue +4. **File Descriptors** -8. **Memory** - * free memory in megabytes + - used descriptors -9. **Disk Space** - * free disk space in gigabytes +5. **Socket Descriptors** -### configuration + - used descriptors + +6. **Erlang processes** + + - used processes + +7. **Erlang run queue** + + - Erlang run queue + +8. **Memory** + + - free memory in megabytes + +9. **Disk Space** + + - free disk space in gigabytes + +## configuration ```yaml socket: @@ -48,11 +57,10 @@ socket: port : 15672 user : 'guest' pass : 'guest' - ``` When no configuration file is found, module tries to connect to: `localhost:15672`. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/redis/README.md b/collectors/python.d.plugin/redis/README.md index 0bea0376e..e7ddd382c 100644 --- a/collectors/python.d.plugin/redis/README.md +++ b/collectors/python.d.plugin/redis/README.md @@ -4,27 +4,33 @@ Get INFO data from redis instance. Following charts are drawn: -1. **Operations** per second - * operations +1. **Operations** per second -2. **Hit rate** in percent - * rate + - operations -3. **Memory utilization** in kilobytes - * total - * lua +2. **Hit rate** in percent -4. **Database keys** - * lines are creates dynamically based on how many databases are there + - rate -5. **Clients** - * connected - * blocked +3. **Memory utilization** in kilobytes -6. **Slaves** - * connected + - total + - lua -### configuration +4. **Database keys** + + - lines are creates dynamically based on how many databases are there + +5. **Clients** + + - connected + - blocked + +6. **Slaves** + + - connected + +## configuration ```yaml socket: @@ -41,4 +47,4 @@ When no configuration file is found, module tries to connect to TCP/IP socket: ` --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/rethinkdbs/README.md b/collectors/python.d.plugin/rethinkdbs/README.md index 183c7f733..277154336 100644 --- a/collectors/python.d.plugin/rethinkdbs/README.md +++ b/collectors/python.d.plugin/rethinkdbs/README.md @@ -4,23 +4,26 @@ Module monitor rethinkdb health metrics. Following charts are drawn: -1. **Connected Servers** - * connected - * missing +1. **Connected Servers** -2. **Active Clients** - * active + - connected + - missing -3. **Queries** per second - * queries +2. **Active Clients** -4. **Documents** per second - * documents + - active -### configuration +3. **Queries** per second -```yaml + - queries + +4. **Documents** per second + + - documents +## configuration + +```yaml localhost: name : 'local' host : '127.0.0.1' @@ -33,4 +36,4 @@ When no configuration file is found, module tries to connect to `127.0.0.1:28015 --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/retroshare/README.md b/collectors/python.d.plugin/retroshare/README.md index a8a58880e..9a82f2ff7 100644 --- a/collectors/python.d.plugin/retroshare/README.md +++ b/collectors/python.d.plugin/retroshare/README.md @@ -1,3 +1,3 @@ # retroshare -[]() +[](<>) diff --git a/collectors/python.d.plugin/riakkv/README.md b/collectors/python.d.plugin/riakkv/README.md index 0bcf22c5b..04343dd99 100644 --- a/collectors/python.d.plugin/riakkv/README.md +++ b/collectors/python.d.plugin/riakkv/README.md @@ -4,95 +4,97 @@ Monitors one or more Riak KV servers. **Requirements:** -* An accessible `/stats` endpoint. See [the Riak KV configuration reference] - documentation](https://docs.riak.com/riak/kv/2.2.3/configuring/reference/#client-interfaces) - for how to enable this. +- An accessible `/stats` endpoint. See [the Riak KV configuration reference documentation](https://docs.riak.com/riak/kv/2.2.3/configuring/reference/#client-interfaces) + for how to enable this. The following charts are included, which are mostly derived from the metrics listed [here](https://docs.riak.com/riak/kv/latest/using/reference/statistics-monitoring/index.html#riak-metrics-to-graph). -1. **Throughput** in operations/s - * **KV operations** - * gets - * puts +1. **Throughput** in operations/s - * **Data type updates** - * counters - * sets - * maps +- **KV operations** + - gets + - puts - * **Search queries** - * queries +- **Data type updates** + - counters + - sets + - maps - * **Search documents** - * indexed +- **Search queries** + - queries - * **Strong consistency operations** - * gets - * puts +- **Search documents** + - indexed -2. **Latency** in milliseconds - * **KV latency** of the past minute - * get (mean, median, 95th / 99th / 100th percentile) - * put (mean, median, 95th / 99th / 100th percentile) +- **Strong consistency operations** + - gets + - puts - * **Data type latency** of the past minute - * counter_merge (mean, median, 95th / 99th / 100th percentile) - * set_merge (mean, median, 95th / 99th / 100th percentile) - * map_merge (mean, median, 95th / 99th / 100th percentile) +2. **Latency** in milliseconds - * **Search latency** of the past minute - * query (median, min, max, 95th / 99th percentile) - * index (median, min, max, 95th / 99th percentile) +- **KV latency** of the past minute + - get (mean, median, 95th / 99th / 100th percentile) + - put (mean, median, 95th / 99th / 100th percentile) - * **Strong consistency latency** of the past minute - * get (mean, median, 95th / 99th / 100th percentile) - * put (mean, median, 95th / 99th / 100th percentile) +- **Data type latency** of the past minute + - counter_merge (mean, median, 95th / 99th / 100th percentile) + - set_merge (mean, median, 95th / 99th / 100th percentile) + - map_merge (mean, median, 95th / 99th / 100th percentile) -3. **Erlang VM metrics** - * **System counters** - * processes +- **Search latency** of the past minute + - query (median, min, max, 95th / 99th percentile) + - index (median, min, max, 95th / 99th percentile) - * **Memory allocation** in MB - * processes.allocated - * processes.used +- **Strong consistency latency** of the past minute + - get (mean, median, 95th / 99th / 100th percentile) + - put (mean, median, 95th / 99th / 100th percentile) -4. **General load / health metrics** - * **Siblings encountered in KV operations** during the past minute - * get (mean, median, 95th / 99th / 100th percentile) +3. **Erlang VM metrics** - * **Object size in KV operations** during the past minute in KB - * get (mean, median, 95th / 99th / 100th percentile) +- **System counters** + - processes - * **Message queue length** in unprocessed messages - * vnodeq_size (mean, median, 95th / 99th / 100th percentile) +- **Memory allocation** in MB + - processes.allocated + - processes.used - * **Index operations** encountered by Search - * errors +4. **General load / health metrics** - * **Protocol buffer connections** - * active +- **Siblings encountered in KV operations** during the past minute + - get (mean, median, 95th / 99th / 100th percentile) - * **Repair operations coordinated by this node** - * read +- **Object size in KV operations** during the past minute in KB + - get (mean, median, 95th / 99th / 100th percentile) - * **Active finite state machines by kind** - * get - * put - * secondary_index - * list_keys +- **Message queue length** in unprocessed messages + - vnodeq_size (mean, median, 95th / 99th / 100th percentile) - * **Rejected finite state machines** - * get - * put +- **Index operations** encountered by Search + - errors - * **Number of writes to Search failed due to bad data format by reason** - * bad_entry - * extract_fail +- **Protocol buffer connections** + - active +- **Repair operations coordinated by this node** + - read -### configuration +- **Active finite state machines by kind** + - get + - put + - secondary_index + - list_keys + +- **Rejected finite state machines** + - get + - put + +- **Number of writes to Search failed due to bad data format by reason** + - bad_entry + - extract_fail + +## configuration The module needs to be passed the full URL to Riak's stats endpoint. For example: diff --git a/collectors/python.d.plugin/samba/README.md b/collectors/python.d.plugin/samba/README.md index 97f2e3d33..ad99deade 100644 --- a/collectors/python.d.plugin/samba/README.md +++ b/collectors/python.d.plugin/samba/README.md @@ -3,60 +3,71 @@ Performance metrics of Samba file sharing. **Requirements:** -* `smbstatus` program -* `sudo` program -* `smbd` must be compiled with profiling enabled -* `smbd` must be started either with the `-P 1` option or inside `smb.conf` using `smbd profiling level` -* `netdata` user needs to be able to sudo the `smbstatus` program without password + +- `smbstatus` program +- `sudo` program +- `smbd` must be compiled with profiling enabled +- `smbd` must be started either with the `-P 1` option or inside `smb.conf` using `smbd profiling level` +- `netdata` user needs to be able to sudo the `smbstatus` program without password It produces the following charts: -1. **Syscall R/Ws** in kilobytes/s - * sendfile - * recvfle - -2. **Smb2 R/Ws** in kilobytes/s - * readout - * writein - * readin - * writeout - -3. **Smb2 Create/Close** in operations/s - * create - * close - -4. **Smb2 Info** in operations/s - * getinfo - * setinfo - -5. **Smb2 Find** in operations/s - * find - -6. **Smb2 Notify** in operations/s - * notify - -7. **Smb2 Lesser Ops** as counters - * tcon - * negprot - * tdis - * cancel - * logoff - * flush - * lock - * keepalive - * break - * sessetup - -### prerequisite +1. **Syscall R/Ws** in kilobytes/s + + - sendfile + - recvfle + +2. **Smb2 R/Ws** in kilobytes/s + + - readout + - writein + - readin + - writeout + +3. **Smb2 Create/Close** in operations/s + + - create + - close + +4. **Smb2 Info** in operations/s + + - getinfo + - setinfo + +5. **Smb2 Find** in operations/s + + - find + +6. **Smb2 Notify** in operations/s + + - notify + +7. **Smb2 Lesser Ops** as counters + + - tcon + - negprot + - tdis + - cancel + - logoff + - flush + - lock + - keepalive + - break + - sessetup + +## prerequisite + This module uses `smbstatus` which can only be executed by root. It uses `sudo` and assumes that it is configured such that the `netdata` user can execute `smbstatus` as root without password. Add to `sudoers`: - netdata ALL=(root) NOPASSWD: /path/to/smbstatus +``` +netdata ALL=(root) NOPASSWD: /path/to/smbstatus +``` -### configuration +## configuration **samba** is disabled by default. Should be explicitly enabled in `python.d.conf`. @@ -66,4 +77,4 @@ samba: yes --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/sensors/README.md b/collectors/python.d.plugin/sensors/README.md index e3f956f11..1c0613c72 100644 --- a/collectors/python.d.plugin/sensors/README.md +++ b/collectors/python.d.plugin/sensors/README.md @@ -4,7 +4,7 @@ System sensors information. Charts are created dynamically. -### configuration +## configuration For detailed configuration information please read [`sensors.conf`](sensors.conf) file. @@ -16,4 +16,4 @@ Please join this discussion for help. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/smartd_log/README.md b/collectors/python.d.plugin/smartd_log/README.md index f6584be70..6f4dda50c 100644 --- a/collectors/python.d.plugin/smartd_log/README.md +++ b/collectors/python.d.plugin/smartd_log/README.md @@ -3,43 +3,44 @@ Module monitor `smartd` log files to collect HDD/SSD S.M.A.R.T attributes. **Requirements:** -* `smartmontools` -It produces following charts for SCSI devices: +- `smartmontools` -1. **Read Error Corrected** +It produces following charts for SCSI devices: -2. **Read Error Uncorrected** +1. **Read Error Corrected** -3. **Write Error Corrected** +2. **Read Error Uncorrected** -4. **Write Error Uncorrected** +3. **Write Error Corrected** -5. **Verify Error Corrected** +4. **Write Error Uncorrected** -6. **Verify Error Uncorrected** +5. **Verify Error Corrected** -7. **Temperature** +6. **Verify Error Uncorrected** +7. **Temperature** For ATA devices: -1. **Read Error Rate** -2. **Seek Error Rate** +1. **Read Error Rate** + +2. **Seek Error Rate** -3. **Soft Read Error Rate** +3. **Soft Read Error Rate** -4. **Write Error Rate** +4. **Write Error Rate** -5. **SATA Interface Downshift** +5. **SATA Interface Downshift** -6. **UDMA CRC Error Count** +6. **UDMA CRC Error Count** -7. **Throughput Performance** +7. **Throughput Performance** -8. **Seek Time Performance** +8. **Seek Time Performance** -9. **Start/Stop Count** +9. **Start/Stop Count** 10. **Power-On Hours Count** @@ -75,25 +76,28 @@ For ATA devices: 26. **Percent Lifetime Used** -### prerequisite +## prerequisite + `smartd` must be running with `-A` option to write smartd attribute information to files. For this you need to set `smartd_opts` (or `SMARTD_ARGS`, check _smartd.service_ content) in `/etc/default/smartmontools`: - ``` # dump smartd attrs info every 600 seconds smartd_opts="-A /var/log/smartd/ -i 600" ``` + You may need to create the smartd directory before smartd will write to it: -``` + +```sh mkdir -p /var/log/smartd ``` -Otherwise, all the smartd `.csv` files may get written to `/var/lib/smartmontools` (default location). See also [https://linux.die.net/man/8/smartd](https://linux.die.net/man/8/smartd) for more info on the `-A --attributelog=PREFIX` command. + +Otherwise, all the smartd `.csv` files may get written to `/var/lib/smartmontools` (default location). See also <https://linux.die.net/man/8/smartd> for more info on the `-A --attributelog=PREFIX` command. `smartd` appends logs at every run. It's strongly recommended to use `logrotate` for smartd files. -### configuration +## configuration ```yaml local: @@ -104,4 +108,4 @@ If no configuration is given, module will attempt to read log files in `/var/log --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/spigotmc/README.md b/collectors/python.d.plugin/spigotmc/README.md index c38930558..8b74913de 100644 --- a/collectors/python.d.plugin/spigotmc/README.md +++ b/collectors/python.d.plugin/spigotmc/README.md @@ -9,7 +9,7 @@ active users. This is not compatible with Spigot plugins which change the format of the data returned by the `tps` or `list` console commands. -### configuration +## configuration ```yaml host: localhost @@ -21,4 +21,4 @@ By default, a connection to port 25575 on the local system is attempted with an --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/spigotmc/spigotmc.chart.py b/collectors/python.d.plugin/spigotmc/spigotmc.chart.py index 536fbe6a8..79d17058c 100644 --- a/collectors/python.d.plugin/spigotmc/spigotmc.chart.py +++ b/collectors/python.d.plugin/spigotmc/spigotmc.chart.py @@ -52,7 +52,13 @@ _TPS_REGEX = re.compile( re.X ) _LIST_REGEX = re.compile( - r'(\d+)', # Current user count. + # Examples: + # There are 4 of a max 50 players online: player1, player2, player3, player4 + # §6There are §c4§6 out of maximum §c50§6 players online. + # §6There are §c3§6/§c1§6 out of maximum §c50§6 players online. + # §6当前有 §c4§6 个玩家在线,最大在线人数为 §c50§6 个玩家. + # §c4§6 人のプレイヤーが接続中です。最大接続可能人数\:§c 50 + r'[^§](\d+)(?:.*?(?=/).*?[^§](\d+))?', # Current user count. re.X ) @@ -85,6 +91,7 @@ class Service(SimpleService): self.console.connect(self.host, self.port, self.password) def reconnect(self): + self.error('try reconnect.') try: try: self.console.disconnect() @@ -99,7 +106,7 @@ class Service(SimpleService): return True def is_alive(self): - if not any( + if any( [ not self.alive, self.console.socket.getsockopt(socket.IPPROTO_TCP, socket.TCP_INFO, 0) != 1 @@ -139,7 +146,13 @@ class Service(SimpleService): raw = self.console.command(COMMAND_ONLINE) match = _LIST_REGEX.search(raw) if match: - data['users'] = int(match.group(1)) + users = int(match.group(1)) + hidden_users = match.group(2) + if hidden_users: + hidden_users = int(hidden_users) + else: + hidden_users = 0 + data['users'] = users + hidden_users else: if not raw: self.error("'{0}' and '{1}' commands returned no value, make sure you set correct password".format( diff --git a/collectors/python.d.plugin/spigotmc/spigotmc.conf b/collectors/python.d.plugin/spigotmc/spigotmc.conf index ccb5e2636..f0064ea2f 100644 --- a/collectors/python.d.plugin/spigotmc/spigotmc.conf +++ b/collectors/python.d.plugin/spigotmc/spigotmc.conf @@ -62,5 +62,5 @@ # In addition to the above, spigotmc supports the following: # # host: localhost # The host to connect to. Defaults to the local system. -# port: 25575 # THe port the remote console is listening on. +# port: 25575 # The port the remote console is listening on. # password: '' # The remote console password. Most be set correctly. diff --git a/collectors/python.d.plugin/springboot/README.md b/collectors/python.d.plugin/springboot/README.md index b5b776dd0..75cfa22ee 100644 --- a/collectors/python.d.plugin/springboot/README.md +++ b/collectors/python.d.plugin/springboot/README.md @@ -6,11 +6,13 @@ Netdata can be used to monitor running Java [Spring Boot](https://spring.io/) ap ## Configuration The Spring Boot Actuator exposes these metrics over HTTP and is very easy to use: -* add `org.springframework.boot:spring-boot-starter-actuator` to your application dependencies -* set `endpoints.metrics.sensitive=false` in your `application.properties` + +- add `org.springframework.boot:spring-boot-starter-actuator` to your application dependencies +- set `endpoints.metrics.sensitive=false` in your `application.properties` You can create custom Metrics by add and inject a PublicMetrics in your application. This is a example to add custom metrics: + ```java package com.example; @@ -65,26 +67,30 @@ Please refer [Spring Boot Actuator: Production-ready features](https://docs.spri ## Charts -1. **Response Codes** in requests/s - * 1xx - * 2xx - * 3xx - * 4xx - * 5xx - * others +1. **Response Codes** in requests/s + + - 1xx + - 2xx + - 3xx + - 4xx + - 5xx + - others + +2. **Threads** -2. **Threads** - * daemon - * total + - daemon + - total -3. **GC Time** in milliseconds and **GC Operations** in operations/s - * Copy - * MarkSweep - * ... +3. **GC Time** in milliseconds and **GC Operations** in operations/s -4. **Heap Mmeory Usage** in KB - * used - * committed + - Copy + - MarkSweep + - ... + +4. **Heap Mmeory Usage** in KB + + - used + - committed ## Usage @@ -93,6 +99,7 @@ The springboot module is enabled by default. It looks up `http://localhost:8080/ This module defines some common charts, and you can add custom charts by change the configurations. The configuration format is like: + ```yaml <id>: name: '<name>' @@ -121,4 +128,4 @@ The dimension name of extras charts should replace `.` to `_`. Please check [springboot.conf](springboot.conf) for more examples. -[]() +[](<>) diff --git a/collectors/python.d.plugin/squid/README.md b/collectors/python.d.plugin/squid/README.md index b278f4191..e1e3d0741 100644 --- a/collectors/python.d.plugin/squid/README.md +++ b/collectors/python.d.plugin/squid/README.md @@ -4,25 +4,29 @@ This module will monitor one or more squid instances depending on configuration. It produces following charts: -1. **Client Bandwidth** in kilobits/s - * in - * out - * hits +1. **Client Bandwidth** in kilobits/s -2. **Client Requests** in requests/s - * requests - * hits - * errors + - in + - out + - hits -3. **Server Bandwidth** in kilobits/s - * in - * out +2. **Client Requests** in requests/s -4. **Server Requests** in requests/s - * requests - * errors + - requests + - hits + - errors -### configuration +3. **Server Bandwidth** in kilobits/s + + - in + - out + +4. **Server Requests** in requests/s + + - requests + - errors + +## configuration ```yaml priority : 50000 @@ -37,4 +41,4 @@ Without any configuration module will try to autodetect where squid presents its --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/tomcat/README.md b/collectors/python.d.plugin/tomcat/README.md index 21e3896a3..4d492c2d0 100644 --- a/collectors/python.d.plugin/tomcat/README.md +++ b/collectors/python.d.plugin/tomcat/README.md @@ -4,20 +4,24 @@ Present tomcat containers memory utilization. Charts: -1. **Requests** per second - * accesses +1. **Requests** per second -2. **Volume** in KB/s - * volume + - accesses -3. **Threads** - * current - * busy +2. **Volume** in KB/s -4. **JVM Free Memory** in MB - * jvm + - volume -### configuration +3. **Threads** + + - current + - busy + +4. **JVM Free Memory** in MB + + - jvm + +## configuration ```yaml localhost: @@ -32,4 +36,4 @@ So it will probably fail. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/tor/README.md b/collectors/python.d.plugin/tor/README.md index 2ce0f25f3..40905a958 100644 --- a/collectors/python.d.plugin/tor/README.md +++ b/collectors/python.d.plugin/tor/README.md @@ -3,16 +3,18 @@ Module connects to tor control port to collect traffic statistics. **Requirements:** -* `tor` program -* `stem` python package + +- `tor` program +- `stem` python package It produces only one chart: -1. **Traffic** - * read - * write +1. **Traffic** + + - read + - write -### configuration +## configuration Needs only `control_port` @@ -45,4 +47,4 @@ Without configuration, module attempts to connect to `127.0.0.1:9051`. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/traefik/README.md b/collectors/python.d.plugin/traefik/README.md index 61e0fdb72..9ced6060f 100644 --- a/collectors/python.d.plugin/traefik/README.md +++ b/collectors/python.d.plugin/traefik/README.md @@ -4,37 +4,42 @@ Module uses the `health` API to provide statistics. It produces: -1. **Responses** by statuses - * success (1xx, 2xx, 304) - * error (5xx) - * redirect (3xx except 304) - * bad (4xx) - * other (all other responses) +1. **Responses** by statuses -2. **Responses** by codes - * 2xx (successful) - * 5xx (internal server errors) - * 3xx (redirect) - * 4xx (bad) - * 1xx (informational) - * other (non-standart responses) + - success (1xx, 2xx, 304) + - error (5xx) + - redirect (3xx except 304) + - bad (4xx) + - other (all other responses) -3. **Detailed Response Codes** requests/s (number of responses for each response code family individually) +2. **Responses** by codes -4. **Requests**/s - * request statistics + - 2xx (successful) + - 5xx (internal server errors) + - 3xx (redirect) + - 4xx (bad) + - 1xx (informational) + - other (non-standart responses) -5. **Total response time** - * sum of all response time +3. **Detailed Response Codes** requests/s (number of responses for each response code family individually) -6. **Average response time** +4. **Requests**/s -7. **Average response time per iteration** + - request statistics -8. **Uptime** - * Traefik server uptime +5. **Total response time** -### configuration + - sum of all response time + +6. **Average response time** + +7. **Average response time per iteration** + +8. **Uptime** + + - Traefik server uptime + +## configuration Needs only `url` to server's `health` @@ -52,4 +57,4 @@ Without configuration, module attempts to connect to `http://localhost:8080/heal --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/unbound/README.md b/collectors/python.d.plugin/unbound/README.md index d9cbc0b8c..d4ad3da15 100644 --- a/collectors/python.d.plugin/unbound/README.md +++ b/collectors/python.d.plugin/unbound/README.md @@ -4,37 +4,41 @@ Monitoring uses the remote control interface to fetch statistics. Provides the following charts: -1. **Queries Processed** - * Ratelimited - * Cache Misses - * Cache Hits - * Expired - * Prefetched - * Recursive - -2. **Request List** - * Average Size - * Max Size - * Overwritten Requests - * Overruns - * Current Size - * User Requests - -3. **Recursion Timings** - * Average recursion processing time - * Median recursion processing time +1. **Queries Processed** + + - Ratelimited + - Cache Misses + - Cache Hits + - Expired + - Prefetched + - Recursive + +2. **Request List** + + - Average Size + - Max Size + - Overwritten Requests + - Overruns + - Current Size + - User Requests + +3. **Recursion Timings** + +- Average recursion processing time +- Median recursion processing time If extended stats are enabled, also provides: -4. **Cache Sizes** - * Message Cache - * RRset Cache - * Infra Cache - * DNSSEC Key Cache - * DNSCrypt Shared Secret Cache - * DNSCrypt Nonce Cache +4. **Cache Sizes** + + - Message Cache + - RRset Cache + - Infra Cache + - DNSSEC Key Cache + - DNSCrypt Shared Secret Cache + - DNSCrypt Nonce Cache -### Configuration +## Configuration Unbound must be manually configured to enable the remote-control protocol. Check the Unbound documentation for info on how to do this. Additionally, @@ -78,27 +82,27 @@ that you use a UNIX socket as it provides far better performance. If you've configured the module and can't get it to work, make sure and check all of the following: -* If you're using autodetection, double check that your `unbound.conf` - file is actually using spaces instead of tabs, and that appropriate - indentation is present. Most Linux distributions ship a default config - for Unbound that uses tabs, and the plugin can't read such a config file - correctly. Also, make sure this file is actually readable by Netdata. -* Ensure that the control protocol is actually configured correctly. - You can check this quickly by running `unbound-control stats_noreset` - as root, which should print out a bunch of info about the internal - statistics of the server. If this returns an error, you don't have - the control protocol set up correctly. -* If using the regular control interface, make sure that the certificate - and key file you have configured in `unbound.conf` are readable by - Netdata. In general, it's preferred to use ACL's on the files to - provide the required permissions. -* If using a UNIX socket, make sure that the socket is both readable - _and_ writable by Netdata. Just like with the regular control - interface, it's preferred to use ACL's to provide these permissions. -* Make sure that SELinux, Apparmor, or any other mandatory access control - system isn't interfering with the access requirements mentioned above. - In some cases, you may have to add a local rule to allow this access. +- If you're using autodetection, double check that your `unbound.conf` + file is actually using spaces instead of tabs, and that appropriate + indentation is present. Most Linux distributions ship a default config + for Unbound that uses tabs, and the plugin can't read such a config file + correctly. Also, make sure this file is actually readable by Netdata. +- Ensure that the control protocol is actually configured correctly. + You can check this quickly by running `unbound-control stats_noreset` + as root, which should print out a bunch of info about the internal + statistics of the server. If this returns an error, you don't have + the control protocol set up correctly. +- If using the regular control interface, make sure that the certificate + and key file you have configured in `unbound.conf` are readable by + Netdata. In general, it's preferred to use ACL's on the files to + provide the required permissions. +- If using a UNIX socket, make sure that the socket is both readable + _and_ writable by Netdata. Just like with the regular control + interface, it's preferred to use ACL's to provide these permissions. +- Make sure that SELinux, Apparmor, or any other mandatory access control + system isn't interfering with the access requirements mentioned above. + In some cases, you may have to add a local rule to allow this access. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/uwsgi/README.md b/collectors/python.d.plugin/uwsgi/README.md index 9d455cfca..a8111965d 100644 --- a/collectors/python.d.plugin/uwsgi/README.md +++ b/collectors/python.d.plugin/uwsgi/README.md @@ -2,26 +2,28 @@ Module monitor uwsgi performance metrics. -https://uwsgi-docs.readthedocs.io/en/latest/StatsServer.html +<https://uwsgi-docs.readthedocs.io/en/latest/StatsServer.html> lines are creates dynamically based on how many workers are there Following charts are drawn: -1. **Requests** - * requests per second - * transmitted data - * average request time +1. **Requests** -2. **Memory** - * rss - * vsz + - requests per second + - transmitted data + - average request time -3. **Exceptions** -4. **Harakiris** -5. **Respawns** +2. **Memory** -### configuration + - rss + - vsz + +3. **Exceptions** +4. **Harakiris** +5. **Respawns** + +## configuration ```yaml socket: @@ -36,4 +38,4 @@ localhost: When no configuration file is found, module tries to connect to TCP/IP socket: `localhost:1717`. -[]() +[](<>) diff --git a/collectors/python.d.plugin/varnish/README.md b/collectors/python.d.plugin/varnish/README.md index 44d64efe1..4de883d31 100644 --- a/collectors/python.d.plugin/varnish/README.md +++ b/collectors/python.d.plugin/varnish/README.md @@ -4,65 +4,77 @@ Module uses the `varnishstat` command to provide varnish cache statistics. It produces: -1. **Connections Statistics** in connections/s - * accepted - * dropped +1. **Connections Statistics** in connections/s -2. **Client Requests** in requests/s - * received + - accepted + - dropped -3. **All History Hit Rate Ratio** in percent - * hit - * miss - * hitpass +2. **Client Requests** in requests/s -4. **Current Poll Hit Rate Ratio** in percent - * hit - * miss - * hitpass + - received -5. **Expired Objects** in expired/s - * objects +3. **All History Hit Rate Ratio** in percent -6. **Least Recently Used Nuked Objects** in nuked/s - * objects + - hit + - miss + - hitpass +4. **Current Poll Hit Rate Ratio** in percent -7. **Number Of Threads In All Pools** in threads - * threads + - hit + - miss + - hitpass -8. **Threads Statistics** in threads/s - * created - * failed - * limited +5. **Expired Objects** in expired/s -9. **Current Queue Length** in requests - * in queue + - objects + +6. **Least Recently Used Nuked Objects** in nuked/s + + - objects + +7. **Number Of Threads In All Pools** in threads + + - threads + +8. **Threads Statistics** in threads/s + + - created + - failed + - limited + +9. **Current Queue Length** in requests + + - in queue 10. **Backend Connections Statistics** in connections/s - * successful - * unhealthy - * reused - * closed - * resycled - * failed -10. **Requests To The Backend** in requests/s - * received + - successful + - unhealthy + - reused + - closed + - resycled + - failed + +11. **Requests To The Backend** in requests/s + + - received + +12. **ESI Statistics** in problems/s + + - errors + - warnings -11. **ESI Statistics** in problems/s - * errors - * warnings +13. **Memory Usage** in MB -12. **Memory Usage** in MB - * free - * allocated + - free + - allocated -13. **Uptime** in seconds - * uptime +14. **Uptime** in seconds + - uptime -### configuration +## configuration Only one parameter is supported: @@ -74,4 +86,4 @@ The name of the varnishd instance to get logs from. If not specified, the host n --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/w1sensor/README.md b/collectors/python.d.plugin/w1sensor/README.md index 94717c812..74edcc0a8 100644 --- a/collectors/python.d.plugin/w1sensor/README.md +++ b/collectors/python.d.plugin/w1sensor/README.md @@ -6,10 +6,10 @@ Currently temperature sensors are supported and automatically detected. Charts are created dynamically based on the number of detected sensors. -### configuration +## configuration For detailed configuration information please read [`w1sensor.conf`](w1sensor.conf) file. --- -[]() +[](<>) diff --git a/collectors/python.d.plugin/web_log/README.md b/collectors/python.d.plugin/web_log/README.md index 031994587..33dfd696a 100644 --- a/collectors/python.d.plugin/web_log/README.md +++ b/collectors/python.d.plugin/web_log/README.md @@ -6,19 +6,19 @@ Web server log files exist for more than 20 years. All web servers of all kinds, Yet, after the appearance of google analytics and similar services, and the recent rise of APM (Application Performance Monitoring) with sophisticated time-series databases that collect and analyze metrics at the application level, all these web server log files are mostly just filling our disks, rotated every night without any use whatsoever. -netdata turns this "useless" log file, into a powerful performance and health monitoring tool, capable of detecting, **in real-time**, most common web server problems, such as: +Netdata turns this "useless" log file, into a powerful performance and health monitoring tool, capable of detecting, **in real-time**, most common web server problems, such as: -- too many redirects (i.e. **oops!** *this should not redirect clients to itself*) -- too many bad requests (i.e. **oops!** *a few files were not uploaded*) -- too many internal server errors (i.e. **oops!** *this release crashes too much*) -- unreasonably too many requests (i.e. **oops!** *we are under attack*) -- unreasonably few requests (i.e. **oops!** *call the network guys*) -- unreasonably slow responses (i.e. **oops!** *the database is slow again*) -- too few successful responses (i.e. **oops!** *help us God!*) +- too many redirects (i.e. **oops!** *this should not redirect clients to itself*) +- too many bad requests (i.e. **oops!** *a few files were not uploaded*) +- too many internal server errors (i.e. **oops!** *this release crashes too much*) +- unreasonably too many requests (i.e. **oops!** *we are under attack*) +- unreasonably few requests (i.e. **oops!** *call the network guys*) +- unreasonably slow responses (i.e. **oops!** *the database is slow again*) +- too few successful responses (i.e. **oops!** *help us God!*) ## Usage -If netdata is installed on a system running a web server, it will detect it and it will automatically present a series of charts, with information obtained from the web server API, like these (*these do not come from the web server log file*): +If Netdata is installed on a system running a web server, it will detect it and it will automatically present a series of charts, with information obtained from the web server API, like these (*these do not come from the web server log file*):  *[**netdata**](https://my-netdata.io/) charts based on metrics collected by querying the `nginx` API (i.e. `/stub_status`).* @@ -29,7 +29,6 @@ If netdata is installed on a system running a web server, it will detect it and [**netdata**](https://my-netdata.io/) has a powerful `web_log` plugin, capable of incrementally parsing any number of web server log files. This plugin is automatically started with [**netdata**](https://my-netdata.io/) and comes, pre-configured, for finding web server log files on popular distributions. Its configuration is at [`/etc/netdata/python.d/web_log.conf`](web_log.conf), like this: - ```yaml nginx_log: name : 'nginx_log' @@ -56,11 +55,11 @@ Once you have all log files configured and [**netdata**](https://my-netdata.io/) In this chart we tried to provide a meaningful status for all responses. So: -- `success` counts all the valid responses (i.e. `1xx` informational, `2xx` successful and `304` not modified). -- `error` are `5xx` internal server errors. These are very bad, they mean your web site or API is facing difficulties. -- `redirect` are `3xx` responses, except `304`. All `3xx` are redirects, but `304` means "not modified" - it tells the browsers the content they already have is still valid and can be used as-is. So, we decided to account it as a successful response. -- `bad` are bad requests that cannot be served. -- `other` as all the other, non-standard, types of responses. +- `success` counts all the valid responses (i.e. `1xx` informational, `2xx` successful and `304` not modified). +- `error` are `5xx` internal server errors. These are very bad, they mean your web site or API is facing difficulties. +- `redirect` are `3xx` responses, except `304`. All `3xx` are redirects, but `304` means "not modified" - it tells the browsers the content they already have is still valid and can be used as-is. So, we decided to account it as a successful response. +- `bad` are bad requests that cannot be served. +- `other` as all the other, non-standard, types of responses.  @@ -68,11 +67,12 @@ In this chart we tried to provide a meaningful status for all responses. So: Then, we group all responses by code family, without interpreting their meaning. **Response by type** requests/s - * success (1xx, 2xx, 304) - * error (5xx) - * redirect (3xx except 304) - * bad (4xx) - * other (all other responses) + +- success (1xx, 2xx, 304) +- error (5xx) +- redirect (3xx except 304) +- bad (4xx) +- other (all other responses)  @@ -81,18 +81,18 @@ Then, we group all responses by code family, without interpreting their meaning. Here we show all the response codes in detail. **Response by code family** requests/s - * 1xx (informational) - * 2xx (successful) - * 3xx (redirect) - * 4xx (bad) - * 5xx (internal server errors) - * other (non-standart responses) - * unmatched (the lines in the log file that are not matched) - + +- 1xx (informational) +- 2xx (successful) +- 3xx (redirect) +- 4xx (bad) +- 5xx (internal server errors) +- other (non-standart responses) +- unmatched (the lines in the log file that are not matched)  ->**Important**<br/>If your application is using hundreds of non-standard response codes, your browser may become slow while viewing this chart, so we have added a configuration [option to disable this chart](https://github.com/netdata/netdata/blob/419cd0a237275e5eeef3f92dcded84e735ee6c58/conf.d/python.d/web_log.conf#L63). +> **Important**<br/>If your application is using hundreds of non-standard response codes, your browser may become slow while viewing this chart, so we have added a configuration [option to disable this chart](https://github.com/netdata/netdata/blob/419cd0a237275e5eeef3f92dcded84e735ee6c58/conf.d/python.d/web_log.conf#L63). ### Detailed Response Codes @@ -107,9 +107,10 @@ What is important to know for this chart, is that the bandwidth used for each re As the legend on the chart suggests, you can use FireQoS to setup QoS on the web server ports and IPs to accurately measure the bandwidth the web server is using. Actually, [there may be a few more reasons to install QoS on your servers](../../tc.plugin/#tcplugin)... **Bandwidth** KB/s - * received (bandwidth of requests) - * send (bandwidth of responses) - + +- received (bandwidth of requests) +- send (bandwidth of responses) +  > **Important**<br/>Most web servers do not log the request size by default.<br/>So, [unless you have configured your web server to log the size of requests](https://github.com/netdata/netdata/blob/419cd0a237275e5eeef3f92dcded84e735ee6c58/conf.d/python.d/web_log.conf#L76-L89), the `received` dimension will be always zero. @@ -121,10 +122,11 @@ As the legend on the chart suggests, you can use FireQoS to setup QoS on the web Keep in mind most web servers timings start at the reception of the full request, until the dispatch of the last byte of the response. So, they include network latencies of responses, but they do not include network latencies of requests. **Timings** ms (request processing time) - * min (bandwidth of requests) - * max (bandwidth of responses) - * average (bandwidth of responses) - + +- min (bandwidth of requests) +- max (bandwidth of responses) +- average (bandwidth of responses) +  > **Important**<br/>Most web servers do not log timing information by default.<br/>So, [unless you have configured your web server to also log timings](https://github.com/netdata/netdata/blob/419cd0a237275e5eeef3f92dcded84e735ee6c58/conf.d/python.d/web_log.conf#L76-L89), this chart will not exist. @@ -179,25 +181,23 @@ The last charts are about the unique IPs accessing your web server.  ->**Important**<br/>To provide this information `web_log` plugin keeps in memory all the IPs seen by the web server. Although this does not require so much memory, if you have a web server with several million unique client IPs, we suggest to [disable this chart](https://github.com/netdata/netdata/blob/419cd0a237275e5eeef3f92dcded84e735ee6c58/conf.d/python.d/web_log.conf#L64). - +> **Important**<br/>To provide this information `web_log` plugin keeps in memory all the IPs seen by the web server. Although this does not require so much memory, if you have a web server with several million unique client IPs, we suggest to [disable this chart](https://github.com/netdata/netdata/blob/419cd0a237275e5eeef3f92dcded84e735ee6c58/conf.d/python.d/web_log.conf#L64). ## Alarms The magic of [**netdata**](https://my-netdata.io/) is that all metrics are collected per second, and all metrics can be used or correlated to provide real-time alarms. Out of the box, [**netdata**](https://my-netdata.io/) automatically attaches the [following alarms](../../../health/health.d/web_log.conf) to all `web_log` charts (i.e. to all log files configured, individually): -alarm|description|minimum<br/>requests|warning|critical -:-------|-------|:------:|:-----:|:------: -`1m_redirects`|The ratio of HTTP redirects (3xx except 304) over all the requests, during the last minute.<br/> <br/>*Detects if the site or the web API is suffering from too many or circular redirects.*<br/> <br/>(i.e. **oops!** *this should not redirect clients to itself*)|120/min|> 20%|> 30% -`1m_bad_requests`|The ratio of HTTP bad requests (4xx) over all the requests, during the last minute.<br/> <br/>*Detects if the site or the web API is receiving too many bad requests, including `404`, not found.*<br/> <br/>(i.e. **oops!** *a few files were not uploaded*)|120/min|> 30%|> 50% -`1m_internal_errors`|The ratio of HTTP internal server errors (5xx), over all the requests, during the last minute.<br/> <br/>*Detects if the site is facing difficulties to serve requests.*<br/> <br/>(i.e. **oops!** *this release crashes too much*)|120/min|> 2%|> 5% -`5m_requests_ratio`|The percentage of successful web requests of the last 5 minutes, compared with the previous 5 minutes.<br/> <br/>*Detects if the site or the web API is suddenly getting too many or too few requests.*<br/> <br/>(i.e. too many = **oops!** *we are under attack*)<br/>(i.e. too few = **oops!** *call the network guys*)|120/5min|> double or < half|> 4x or < 1/4x -`web_slow`|The average time to respond to requests, over the last 1 minute, compared to the average of last 10 minutes.<br/> <br/>*Detects if the site or the web API is suddenly a lot slower.*<br/> <br/>(i.e. **oops!** *the database is slow again*)|120/min|> 2x|> 4x -`1m_successful`|The ratio of successful HTTP responses (1xx, 2xx, 304) over all the requests, during the last minute.<br/> <br/>*Detects if the site or the web API is performing within limits.*<br/> <br/>(i.e. **oops!** *help us God!*)|120/min|< 85%|< 75% +| alarm|description|minimum<br/>requests|warning|critical| +|:----|-----------|:------------------:|:-----:|:------:| +| `1m_redirects`|The ratio of HTTP redirects (3xx except 304) over all the requests, during the last minute.<br/> <br/>*Detects if the site or the web API is suffering from too many or circular redirects.*<br/> <br/>(i.e. **oops!** *this should not redirect clients to itself*)|120/min|> 20%|> 30%| +| `1m_bad_requests`|The ratio of HTTP bad requests (4xx) over all the requests, during the last minute.<br/> <br/>*Detects if the site or the web API is receiving too many bad requests, including `404`, not found.*<br/> <br/>(i.e. **oops!** *a few files were not uploaded*)|120/min|> 30%|> 50%| +| `1m_internal_errors`|The ratio of HTTP internal server errors (5xx), over all the requests, during the last minute.<br/> <br/>*Detects if the site is facing difficulties to serve requests.*<br/> <br/>(i.e. **oops!** *this release crashes too much*)|120/min|> 2%|> 5%| +| `5m_requests_ratio`|The percentage of successful web requests of the last 5 minutes, compared with the previous 5 minutes.<br/> <br/>*Detects if the site or the web API is suddenly getting too many or too few requests.*<br/> <br/>(i.e. too many = **oops!** *we are under attack*)<br/>(i.e. too few = **oops!** *call the network guys*)|120/5min|> double or \< half|> 4x or \< 1/4x| +| `web_slow`|The average time to respond to requests, over the last 1 minute, compared to the average of last 10 minutes.<br/> <br/>*Detects if the site or the web API is suddenly a lot slower.*<br/> <br/>(i.e. **oops!** *the database is slow again*)|120/min|> 2x|> 4x| +| `1m_successful`|The ratio of successful HTTP responses (1xx, 2xx, 304) over all the requests, during the last minute.<br/> <br/>*Detects if the site or the web API is performing within limits.*<br/> <br/>(i.e. **oops!** *help us God!*)|120/min|\< 85%|\< 75%| The column `minimum requests` state the minimum number of requests required for the alarm to be evaluated. We found that when the site is receiving requests above this rate, these alarms are pretty accurate (i.e. no false-positives). -[**netdata**](https://my-netdata.io/) alarms are user configurable. Sample config files can be found under directory `health/health.d` of the netdata github repository. So, even [`web_log` alarms can be adapted to your needs](../../../health/health.d/web_log.conf). - +[**netdata**](https://my-netdata.io/) alarms are user configurable. Sample config files can be found under directory `health/health.d` of the [Netdata GitHub repository](https://github.com/netdata/netdata/). So, even [`web_log` alarms can be adapted to your needs](../../../health/health.d/web_log.conf). -[]() +[](<>) |