diff options
Diffstat (limited to 'collectors/python.d.plugin')
209 files changed, 2024 insertions, 3941 deletions
diff --git a/collectors/python.d.plugin/.keep b/collectors/python.d.plugin/.keep new file mode 100644 index 00000000..e69de29b --- /dev/null +++ b/collectors/python.d.plugin/.keep diff --git a/collectors/python.d.plugin/Makefile.am b/collectors/python.d.plugin/Makefile.am index 984050c4..3599d9c9 100644 --- a/collectors/python.d.plugin/Makefile.am +++ b/collectors/python.d.plugin/Makefile.am @@ -29,12 +29,11 @@ dist_python_DATA = \ userpythonconfigdir=$(configdir)/python.d dist_userpythonconfig_DATA = \ - $(top_srcdir)/installer/.keep \ + .keep \ $(NULL) pythonconfigdir=$(libconfigdir)/python.d dist_pythonconfig_DATA = \ - $(top_srcdir)/installer/.keep \ $(NULL) include adaptec_raid/Makefile.inc diff --git a/collectors/python.d.plugin/Makefile.in b/collectors/python.d.plugin/Makefile.in deleted file mode 100644 index 49560689..00000000 --- a/collectors/python.d.plugin/Makefile.in +++ /dev/null @@ -1,2025 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# SPDX-License-Identifier: GPL-3.0-or-later - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -DIST_COMMON = $(top_srcdir)/build/subst.inc \ - $(srcdir)/adaptec_raid/Makefile.inc \ - $(srcdir)/apache/Makefile.inc $(srcdir)/beanstalk/Makefile.inc \ - $(srcdir)/bind_rndc/Makefile.inc $(srcdir)/boinc/Makefile.inc \ - $(srcdir)/ceph/Makefile.inc $(srcdir)/chrony/Makefile.inc \ - $(srcdir)/couchdb/Makefile.inc $(srcdir)/cpufreq/Makefile.inc \ - $(srcdir)/cpuidle/Makefile.inc $(srcdir)/dnsdist/Makefile.inc \ - $(srcdir)/dns_query_time/Makefile.inc \ - $(srcdir)/dockerd/Makefile.inc $(srcdir)/dovecot/Makefile.inc \ - $(srcdir)/elasticsearch/Makefile.inc \ - $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc \ - $(srcdir)/fail2ban/Makefile.inc \ - $(srcdir)/freeradius/Makefile.inc \ - $(srcdir)/go_expvar/Makefile.inc \ - $(srcdir)/haproxy/Makefile.inc $(srcdir)/hddtemp/Makefile.inc \ - $(srcdir)/httpcheck/Makefile.inc \ - $(srcdir)/icecast/Makefile.inc $(srcdir)/ipfs/Makefile.inc \ - $(srcdir)/isc_dhcpd/Makefile.inc \ - $(srcdir)/linux_power_supply/Makefile.inc \ - $(srcdir)/litespeed/Makefile.inc $(srcdir)/logind/Makefile.inc \ - $(srcdir)/mdstat/Makefile.inc $(srcdir)/megacli/Makefile.inc \ - $(srcdir)/memcached/Makefile.inc \ - $(srcdir)/mongodb/Makefile.inc $(srcdir)/monit/Makefile.inc \ - $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc \ - $(srcdir)/nginx_plus/Makefile.inc \ - $(srcdir)/nvidia_smi/Makefile.inc $(srcdir)/nsd/Makefile.inc \ - $(srcdir)/ntpd/Makefile.inc \ - $(srcdir)/ovpn_status_log/Makefile.inc \ - $(srcdir)/openldap/Makefile.inc $(srcdir)/phpfpm/Makefile.inc \ - $(srcdir)/portcheck/Makefile.inc \ - $(srcdir)/postfix/Makefile.inc $(srcdir)/postgres/Makefile.inc \ - $(srcdir)/powerdns/Makefile.inc \ - $(srcdir)/proxysql/Makefile.inc $(srcdir)/puppet/Makefile.inc \ - $(srcdir)/rabbitmq/Makefile.inc $(srcdir)/redis/Makefile.inc \ - $(srcdir)/rethinkdbs/Makefile.inc \ - $(srcdir)/retroshare/Makefile.inc $(srcdir)/samba/Makefile.inc \ - $(srcdir)/sensors/Makefile.inc \ - $(srcdir)/smartd_log/Makefile.inc \ - $(srcdir)/spigotmc/Makefile.inc \ - $(srcdir)/springboot/Makefile.inc $(srcdir)/squid/Makefile.inc \ - $(srcdir)/tomcat/Makefile.inc $(srcdir)/tor/Makefile.inc \ - $(srcdir)/traefik/Makefile.inc $(srcdir)/unbound/Makefile.inc \ - $(srcdir)/uwsgi/Makefile.inc $(srcdir)/varnish/Makefile.inc \ - $(srcdir)/w1sensor/Makefile.inc $(srcdir)/web_log/Makefile.inc \ - $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(dist_plugins_SCRIPTS) $(dist_python_SCRIPTS) \ - $(dist_bases_DATA) $(dist_bases_framework_services_DATA) \ - $(dist_libconfig_DATA) $(dist_noinst_DATA) $(dist_python_DATA) \ - $(dist_python_urllib3_DATA) \ - $(dist_python_urllib3_backports_DATA) \ - $(dist_python_urllib3_contrib_DATA) \ - $(dist_python_urllib3_packages_DATA) \ - $(dist_python_urllib3_securetransport_DATA) \ - $(dist_python_urllib3_ssl_match_hostname_DATA) \ - $(dist_python_urllib3_util_DATA) $(dist_pythonconfig_DATA) \ - $(dist_pythonmodules_DATA) $(dist_pythonyaml2_DATA) \ - $(dist_pythonyaml3_DATA) $(dist_third_party_DATA) \ - $(dist_userpythonconfig_DATA) -subdir = collectors/python.d.plugin -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \ - $(top_srcdir)/build/m4/ax_c__generic.m4 \ - $(top_srcdir)/build/m4/ax_c_lto.m4 \ - $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \ - $(top_srcdir)/build/m4/ax_c_mallopt.m4 \ - $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \ - $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \ - $(top_srcdir)/build/m4/ax_pthread.m4 \ - $(top_srcdir)/build/m4/jemalloc.m4 \ - $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(pythondir)" \ - "$(DESTDIR)$(basesdir)" \ - "$(DESTDIR)$(bases_framework_servicesdir)" \ - "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(pythondir)" \ - "$(DESTDIR)$(python_urllib3dir)" \ - "$(DESTDIR)$(python_urllib3_backportsdir)" \ - "$(DESTDIR)$(python_urllib3_contribdir)" \ - "$(DESTDIR)$(python_urllib3_packagesdir)" \ - "$(DESTDIR)$(python_urllib3_securetransportdir)" \ - "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" \ - "$(DESTDIR)$(python_urllib3_utildir)" \ - "$(DESTDIR)$(pythonconfigdir)" "$(DESTDIR)$(pythonmodulesdir)" \ - "$(DESTDIR)$(pythonyaml2dir)" "$(DESTDIR)$(pythonyaml3dir)" \ - "$(DESTDIR)$(third_partydir)" \ - "$(DESTDIR)$(userpythonconfigdir)" -SCRIPTS = $(dist_plugins_SCRIPTS) $(dist_python_SCRIPTS) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -DATA = $(dist_bases_DATA) $(dist_bases_framework_services_DATA) \ - $(dist_libconfig_DATA) $(dist_noinst_DATA) $(dist_python_DATA) \ - $(dist_python_urllib3_DATA) \ - $(dist_python_urllib3_backports_DATA) \ - $(dist_python_urllib3_contrib_DATA) \ - $(dist_python_urllib3_packages_DATA) \ - $(dist_python_urllib3_securetransport_DATA) \ - $(dist_python_urllib3_ssl_match_hostname_DATA) \ - $(dist_python_urllib3_util_DATA) $(dist_pythonconfig_DATA) \ - $(dist_pythonmodules_DATA) $(dist_pythonyaml2_DATA) \ - $(dist_pythonyaml3_DATA) $(dist_third_party_DATA) \ - $(dist_userpythonconfig_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@ -IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@ -LDFLAGS = @LDFLAGS@ -LIBCAP_CFLAGS = @LIBCAP_CFLAGS@ -LIBCAP_LIBS = @LIBCAP_LIBS@ -LIBMNL_CFLAGS = @LIBMNL_CFLAGS@ -LIBMNL_LIBS = @LIBMNL_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MATH_CFLAGS = @MATH_CFLAGS@ -MATH_LIBS = @MATH_LIBS@ -MKDIR_P = @MKDIR_P@ -NFACCT_CFLAGS = @NFACCT_CFLAGS@ -NFACCT_LIBS = @NFACCT_LIBS@ -OBJEXT = @OBJEXT@ -OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@ -OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@ -OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@ -OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@ -OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@ -OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@ -OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@ -OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@ -OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@ -OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@ -OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@ -OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_RPM_RELEASE = @PACKAGE_RPM_RELEASE@ -PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -PTHREAD_CC = @PTHREAD_CC@ -PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ -PTHREAD_LIBS = @PTHREAD_LIBS@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SSE_CANDIDATE = @SSE_CANDIDATE@ -STRIP = @STRIP@ -UUID_CFLAGS = @UUID_CFLAGS@ -UUID_LIBS = @UUID_LIBS@ -VERSION = @VERSION@ -ZLIB_CFLAGS = @ZLIB_CFLAGS@ -ZLIB_LIBS = @ZLIB_LIBS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -ax_pthread_config = @ax_pthread_config@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_target = @build_target@ -build_vendor = @build_vendor@ -builddir = @builddir@ -cachedir = @cachedir@ -chartsdir = @chartsdir@ -configdir = @configdir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -has_jemalloc = @has_jemalloc@ -has_tcmalloc = @has_tcmalloc@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libconfigdir = @libconfigdir@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -logdir = @logdir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -nodedir = @nodedir@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -pluginsdir = @pluginsdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -pythondir = @pythondir@ -registrydir = @registrydir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -varlibdir = @varlibdir@ -webdir = @webdir@ -MAINTAINERCLEANFILES = $(srcdir)/Makefile.in -CLEANFILES = \ - python.d.plugin \ - $(NULL) - -SUFFIXES = .in -dist_libconfig_DATA = \ - python.d.conf \ - $(NULL) - -dist_plugins_SCRIPTS = \ - python.d.plugin \ - $(NULL) - - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution -dist_noinst_DATA = python.d.plugin.in README.md $(NULL) \ - adaptec_raid/README.md adaptec_raid/Makefile.inc \ - apache/README.md apache/Makefile.inc beanstalk/README.md \ - beanstalk/Makefile.inc bind_rndc/README.md \ - bind_rndc/Makefile.inc boinc/README.md boinc/Makefile.inc \ - ceph/README.md ceph/Makefile.inc chrony/README.md \ - chrony/Makefile.inc couchdb/README.md couchdb/Makefile.inc \ - cpufreq/README.md cpufreq/Makefile.inc cpuidle/README.md \ - cpuidle/Makefile.inc dnsdist/README.md dnsdist/Makefile.inc \ - dns_query_time/README.md dns_query_time/Makefile.inc \ - dockerd/README.md dockerd/Makefile.inc dovecot/README.md \ - dovecot/Makefile.inc elasticsearch/README.md \ - elasticsearch/Makefile.inc example/README.md \ - example/Makefile.inc exim/README.md exim/Makefile.inc \ - fail2ban/README.md fail2ban/Makefile.inc freeradius/README.md \ - freeradius/Makefile.inc go_expvar/README.md \ - go_expvar/Makefile.inc haproxy/README.md haproxy/Makefile.inc \ - hddtemp/README.md hddtemp/Makefile.inc httpcheck/README.md \ - httpcheck/Makefile.inc icecast/README.md icecast/Makefile.inc \ - ipfs/README.md ipfs/Makefile.inc isc_dhcpd/README.md \ - isc_dhcpd/Makefile.inc linux_power_supply/README.md \ - linux_power_supply/Makefile.inc litespeed/README.md \ - litespeed/Makefile.inc logind/README.md logind/Makefile.inc \ - mdstat/README.md mdstat/Makefile.inc megacli/README.md \ - megacli/Makefile.inc memcached/README.md \ - memcached/Makefile.inc mongodb/README.md mongodb/Makefile.inc \ - monit/README.md monit/Makefile.inc mysql/README.md \ - mysql/Makefile.inc nginx/README.md nginx/Makefile.inc \ - nginx_plus/README.md nginx_plus/Makefile.inc \ - nvidia_smi/README.md nvidia_smi/Makefile.inc nsd/README.md \ - nsd/Makefile.inc ntpd/README.md ntpd/Makefile.inc \ - ovpn_status_log/README.md ovpn_status_log/Makefile.inc \ - openldap/README.md openldap/Makefile.inc phpfpm/README.md \ - phpfpm/Makefile.inc portcheck/README.md portcheck/Makefile.inc \ - postfix/README.md postfix/Makefile.inc postgres/README.md \ - postgres/Makefile.inc powerdns/README.md powerdns/Makefile.inc \ - proxysql/README.md proxysql/Makefile.inc puppet/README.md \ - puppet/Makefile.inc rabbitmq/README.md rabbitmq/Makefile.inc \ - redis/README.md redis/Makefile.inc rethinkdbs/README.md \ - rethinkdbs/Makefile.inc retroshare/README.md \ - retroshare/Makefile.inc samba/README.md samba/Makefile.inc \ - sensors/README.md sensors/Makefile.inc smartd_log/README.md \ - smartd_log/Makefile.inc spigotmc/README.md \ - spigotmc/Makefile.inc springboot/README.md \ - springboot/Makefile.inc squid/README.md squid/Makefile.inc \ - tomcat/README.md tomcat/Makefile.inc tor/README.md \ - tor/Makefile.inc traefik/README.md traefik/Makefile.inc \ - unbound/README.md unbound/Makefile.inc uwsgi/README.md \ - uwsgi/Makefile.inc varnish/README.md varnish/Makefile.inc \ - w1sensor/README.md w1sensor/Makefile.inc web_log/README.md \ - web_log/Makefile.inc -dist_python_SCRIPTS = \ - $(NULL) - - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files -dist_python_DATA = $(NULL) adaptec_raid/adaptec_raid.chart.py \ - apache/apache.chart.py beanstalk/beanstalk.chart.py \ - bind_rndc/bind_rndc.chart.py boinc/boinc.chart.py \ - ceph/ceph.chart.py chrony/chrony.chart.py \ - couchdb/couchdb.chart.py cpufreq/cpufreq.chart.py \ - cpuidle/cpuidle.chart.py dnsdist/dnsdist.chart.py \ - dns_query_time/dns_query_time.chart.py \ - dockerd/dockerd.chart.py dovecot/dovecot.chart.py \ - elasticsearch/elasticsearch.chart.py example/example.chart.py \ - exim/exim.chart.py fail2ban/fail2ban.chart.py \ - freeradius/freeradius.chart.py go_expvar/go_expvar.chart.py \ - haproxy/haproxy.chart.py hddtemp/hddtemp.chart.py \ - httpcheck/httpcheck.chart.py icecast/icecast.chart.py \ - ipfs/ipfs.chart.py isc_dhcpd/isc_dhcpd.chart.py \ - linux_power_supply/linux_power_supply.chart.py \ - litespeed/litespeed.chart.py logind/logind.chart.py \ - mdstat/mdstat.chart.py megacli/megacli.chart.py \ - memcached/memcached.chart.py mongodb/mongodb.chart.py \ - monit/monit.chart.py mysql/mysql.chart.py nginx/nginx.chart.py \ - nginx_plus/nginx_plus.chart.py nvidia_smi/nvidia_smi.chart.py \ - nsd/nsd.chart.py ntpd/ntpd.chart.py \ - ovpn_status_log/ovpn_status_log.chart.py \ - openldap/openldap.chart.py phpfpm/phpfpm.chart.py \ - portcheck/portcheck.chart.py postfix/postfix.chart.py \ - postgres/postgres.chart.py powerdns/powerdns.chart.py \ - proxysql/proxysql.chart.py puppet/puppet.chart.py \ - rabbitmq/rabbitmq.chart.py redis/redis.chart.py \ - rethinkdbs/rethinkdbs.chart.py retroshare/retroshare.chart.py \ - samba/samba.chart.py sensors/sensors.chart.py \ - smartd_log/smartd_log.chart.py spigotmc/spigotmc.chart.py \ - springboot/springboot.chart.py squid/squid.chart.py \ - tomcat/tomcat.chart.py tor/tor.chart.py \ - traefik/traefik.chart.py unbound/unbound.chart.py \ - uwsgi/uwsgi.chart.py varnish/varnish.chart.py \ - w1sensor/w1sensor.chart.py web_log/web_log.chart.py -userpythonconfigdir = $(configdir)/python.d -dist_userpythonconfig_DATA = \ - $(top_srcdir)/installer/.keep \ - $(NULL) - -pythonconfigdir = $(libconfigdir)/python.d -dist_pythonconfig_DATA = $(top_srcdir)/installer/.keep $(NULL) \ - adaptec_raid/adaptec_raid.conf apache/apache.conf \ - beanstalk/beanstalk.conf bind_rndc/bind_rndc.conf \ - boinc/boinc.conf ceph/ceph.conf chrony/chrony.conf \ - couchdb/couchdb.conf cpufreq/cpufreq.conf cpuidle/cpuidle.conf \ - dnsdist/dnsdist.conf dns_query_time/dns_query_time.conf \ - dockerd/dockerd.conf dovecot/dovecot.conf \ - elasticsearch/elasticsearch.conf example/example.conf \ - exim/exim.conf fail2ban/fail2ban.conf \ - freeradius/freeradius.conf go_expvar/go_expvar.conf \ - haproxy/haproxy.conf hddtemp/hddtemp.conf \ - httpcheck/httpcheck.conf icecast/icecast.conf ipfs/ipfs.conf \ - isc_dhcpd/isc_dhcpd.conf \ - linux_power_supply/linux_power_supply.conf \ - litespeed/litespeed.conf logind/logind.conf mdstat/mdstat.conf \ - megacli/megacli.conf memcached/memcached.conf \ - mongodb/mongodb.conf monit/monit.conf mysql/mysql.conf \ - nginx/nginx.conf nginx_plus/nginx_plus.conf \ - nvidia_smi/nvidia_smi.conf nsd/nsd.conf ntpd/ntpd.conf \ - ovpn_status_log/ovpn_status_log.conf openldap/openldap.conf \ - phpfpm/phpfpm.conf portcheck/portcheck.conf \ - postfix/postfix.conf postgres/postgres.conf \ - powerdns/powerdns.conf proxysql/proxysql.conf \ - puppet/puppet.conf rabbitmq/rabbitmq.conf redis/redis.conf \ - rethinkdbs/rethinkdbs.conf retroshare/retroshare.conf \ - samba/samba.conf sensors/sensors.conf \ - smartd_log/smartd_log.conf spigotmc/spigotmc.conf \ - springboot/springboot.conf squid/squid.conf tomcat/tomcat.conf \ - tor/tor.conf traefik/traefik.conf unbound/unbound.conf \ - uwsgi/uwsgi.conf varnish/varnish.conf w1sensor/w1sensor.conf \ - web_log/web_log.conf -pythonmodulesdir = $(pythondir)/python_modules -dist_pythonmodules_DATA = \ - python_modules/__init__.py \ - $(NULL) - -basesdir = $(pythonmodulesdir)/bases -dist_bases_DATA = \ - python_modules/bases/__init__.py \ - python_modules/bases/charts.py \ - python_modules/bases/collection.py \ - python_modules/bases/loaders.py \ - python_modules/bases/loggers.py \ - $(NULL) - -bases_framework_servicesdir = $(basesdir)/FrameworkServices -dist_bases_framework_services_DATA = \ - python_modules/bases/FrameworkServices/__init__.py \ - python_modules/bases/FrameworkServices/ExecutableService.py \ - python_modules/bases/FrameworkServices/LogService.py \ - python_modules/bases/FrameworkServices/MySQLService.py \ - python_modules/bases/FrameworkServices/SimpleService.py \ - python_modules/bases/FrameworkServices/SocketService.py \ - python_modules/bases/FrameworkServices/UrlService.py \ - $(NULL) - -third_partydir = $(pythonmodulesdir)/third_party -dist_third_party_DATA = \ - python_modules/third_party/__init__.py \ - python_modules/third_party/ordereddict.py \ - python_modules/third_party/lm_sensors.py \ - python_modules/third_party/mcrcon.py \ - python_modules/third_party/boinc_client.py \ - python_modules/third_party/monotonic.py \ - $(NULL) - -pythonyaml2dir = $(pythonmodulesdir)/pyyaml2 -dist_pythonyaml2_DATA = \ - python_modules/pyyaml2/__init__.py \ - python_modules/pyyaml2/composer.py \ - python_modules/pyyaml2/constructor.py \ - python_modules/pyyaml2/cyaml.py \ - python_modules/pyyaml2/dumper.py \ - python_modules/pyyaml2/emitter.py \ - python_modules/pyyaml2/error.py \ - python_modules/pyyaml2/events.py \ - python_modules/pyyaml2/loader.py \ - python_modules/pyyaml2/nodes.py \ - python_modules/pyyaml2/parser.py \ - python_modules/pyyaml2/reader.py \ - python_modules/pyyaml2/representer.py \ - python_modules/pyyaml2/resolver.py \ - python_modules/pyyaml2/scanner.py \ - python_modules/pyyaml2/serializer.py \ - python_modules/pyyaml2/tokens.py \ - $(NULL) - -pythonyaml3dir = $(pythonmodulesdir)/pyyaml3 -dist_pythonyaml3_DATA = \ - python_modules/pyyaml3/__init__.py \ - python_modules/pyyaml3/composer.py \ - python_modules/pyyaml3/constructor.py \ - python_modules/pyyaml3/cyaml.py \ - python_modules/pyyaml3/dumper.py \ - python_modules/pyyaml3/emitter.py \ - python_modules/pyyaml3/error.py \ - python_modules/pyyaml3/events.py \ - python_modules/pyyaml3/loader.py \ - python_modules/pyyaml3/nodes.py \ - python_modules/pyyaml3/parser.py \ - python_modules/pyyaml3/reader.py \ - python_modules/pyyaml3/representer.py \ - python_modules/pyyaml3/resolver.py \ - python_modules/pyyaml3/scanner.py \ - python_modules/pyyaml3/serializer.py \ - python_modules/pyyaml3/tokens.py \ - $(NULL) - -python_urllib3dir = $(pythonmodulesdir)/urllib3 -dist_python_urllib3_DATA = \ - python_modules/urllib3/__init__.py \ - python_modules/urllib3/_collections.py \ - python_modules/urllib3/connection.py \ - python_modules/urllib3/connectionpool.py \ - python_modules/urllib3/exceptions.py \ - python_modules/urllib3/fields.py \ - python_modules/urllib3/filepost.py \ - python_modules/urllib3/response.py \ - python_modules/urllib3/poolmanager.py \ - python_modules/urllib3/request.py \ - $(NULL) - -python_urllib3_utildir = $(python_urllib3dir)/util -dist_python_urllib3_util_DATA = \ - python_modules/urllib3/util/__init__.py \ - python_modules/urllib3/util/connection.py \ - python_modules/urllib3/util/request.py \ - python_modules/urllib3/util/response.py \ - python_modules/urllib3/util/retry.py \ - python_modules/urllib3/util/selectors.py \ - python_modules/urllib3/util/ssl_.py \ - python_modules/urllib3/util/timeout.py \ - python_modules/urllib3/util/url.py \ - python_modules/urllib3/util/wait.py \ - $(NULL) - -python_urllib3_packagesdir = $(python_urllib3dir)/packages -dist_python_urllib3_packages_DATA = \ - python_modules/urllib3/packages/__init__.py \ - python_modules/urllib3/packages/ordered_dict.py \ - python_modules/urllib3/packages/six.py \ - $(NULL) - -python_urllib3_backportsdir = $(python_urllib3_packagesdir)/backports -dist_python_urllib3_backports_DATA = \ - python_modules/urllib3/packages/backports/__init__.py \ - python_modules/urllib3/packages/backports/makefile.py \ - $(NULL) - -python_urllib3_ssl_match_hostnamedir = $(python_urllib3_packagesdir)/ssl_match_hostname -dist_python_urllib3_ssl_match_hostname_DATA = \ - python_modules/urllib3/packages/ssl_match_hostname/__init__.py \ - python_modules/urllib3/packages/ssl_match_hostname/_implementation.py \ - $(NULL) - -python_urllib3_contribdir = $(python_urllib3dir)/contrib -dist_python_urllib3_contrib_DATA = \ - python_modules/urllib3/contrib/__init__.py \ - python_modules/urllib3/contrib/appengine.py \ - python_modules/urllib3/contrib/ntlmpool.py \ - python_modules/urllib3/contrib/pyopenssl.py \ - python_modules/urllib3/contrib/securetransport.py \ - python_modules/urllib3/contrib/socks.py \ - $(NULL) - -python_urllib3_securetransportdir = $(python_urllib3_contribdir)/_securetransport -dist_python_urllib3_securetransport_DATA = \ - python_modules/urllib3/contrib/_securetransport/__init__.py \ - python_modules/urllib3/contrib/_securetransport/bindings.py \ - python_modules/urllib3/contrib/_securetransport/low_level.py \ - $(NULL) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .in -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/adaptec_raid/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/beanstalk/Makefile.inc $(srcdir)/bind_rndc/Makefile.inc $(srcdir)/boinc/Makefile.inc $(srcdir)/ceph/Makefile.inc $(srcdir)/chrony/Makefile.inc $(srcdir)/couchdb/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/cpuidle/Makefile.inc $(srcdir)/dnsdist/Makefile.inc $(srcdir)/dns_query_time/Makefile.inc $(srcdir)/dockerd/Makefile.inc $(srcdir)/dovecot/Makefile.inc $(srcdir)/elasticsearch/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/fail2ban/Makefile.inc $(srcdir)/freeradius/Makefile.inc $(srcdir)/go_expvar/Makefile.inc $(srcdir)/haproxy/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/httpcheck/Makefile.inc $(srcdir)/icecast/Makefile.inc $(srcdir)/ipfs/Makefile.inc $(srcdir)/isc_dhcpd/Makefile.inc $(srcdir)/linux_power_supply/Makefile.inc $(srcdir)/litespeed/Makefile.inc $(srcdir)/logind/Makefile.inc $(srcdir)/mdstat/Makefile.inc $(srcdir)/megacli/Makefile.inc $(srcdir)/memcached/Makefile.inc $(srcdir)/mongodb/Makefile.inc $(srcdir)/monit/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nginx_plus/Makefile.inc $(srcdir)/nvidia_smi/Makefile.inc $(srcdir)/nsd/Makefile.inc $(srcdir)/ntpd/Makefile.inc $(srcdir)/ovpn_status_log/Makefile.inc $(srcdir)/openldap/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/portcheck/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/postgres/Makefile.inc $(srcdir)/powerdns/Makefile.inc $(srcdir)/proxysql/Makefile.inc $(srcdir)/puppet/Makefile.inc $(srcdir)/rabbitmq/Makefile.inc $(srcdir)/redis/Makefile.inc $(srcdir)/rethinkdbs/Makefile.inc $(srcdir)/retroshare/Makefile.inc $(srcdir)/samba/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/smartd_log/Makefile.inc $(srcdir)/spigotmc/Makefile.inc $(srcdir)/springboot/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(srcdir)/tor/Makefile.inc $(srcdir)/traefik/Makefile.inc $(srcdir)/unbound/Makefile.inc $(srcdir)/uwsgi/Makefile.inc $(srcdir)/varnish/Makefile.inc $(srcdir)/w1sensor/Makefile.inc $(srcdir)/web_log/Makefile.inc $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu collectors/python.d.plugin/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu collectors/python.d.plugin/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; -$(top_srcdir)/build/subst.inc $(srcdir)/adaptec_raid/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/beanstalk/Makefile.inc $(srcdir)/bind_rndc/Makefile.inc $(srcdir)/boinc/Makefile.inc $(srcdir)/ceph/Makefile.inc $(srcdir)/chrony/Makefile.inc $(srcdir)/couchdb/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/cpuidle/Makefile.inc $(srcdir)/dnsdist/Makefile.inc $(srcdir)/dns_query_time/Makefile.inc $(srcdir)/dockerd/Makefile.inc $(srcdir)/dovecot/Makefile.inc $(srcdir)/elasticsearch/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/fail2ban/Makefile.inc $(srcdir)/freeradius/Makefile.inc $(srcdir)/go_expvar/Makefile.inc $(srcdir)/haproxy/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/httpcheck/Makefile.inc $(srcdir)/icecast/Makefile.inc $(srcdir)/ipfs/Makefile.inc $(srcdir)/isc_dhcpd/Makefile.inc $(srcdir)/linux_power_supply/Makefile.inc $(srcdir)/litespeed/Makefile.inc $(srcdir)/logind/Makefile.inc $(srcdir)/mdstat/Makefile.inc $(srcdir)/megacli/Makefile.inc $(srcdir)/memcached/Makefile.inc $(srcdir)/mongodb/Makefile.inc $(srcdir)/monit/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nginx_plus/Makefile.inc $(srcdir)/nvidia_smi/Makefile.inc $(srcdir)/nsd/Makefile.inc $(srcdir)/ntpd/Makefile.inc $(srcdir)/ovpn_status_log/Makefile.inc $(srcdir)/openldap/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/portcheck/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/postgres/Makefile.inc $(srcdir)/powerdns/Makefile.inc $(srcdir)/proxysql/Makefile.inc $(srcdir)/puppet/Makefile.inc $(srcdir)/rabbitmq/Makefile.inc $(srcdir)/redis/Makefile.inc $(srcdir)/rethinkdbs/Makefile.inc $(srcdir)/retroshare/Makefile.inc $(srcdir)/samba/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/smartd_log/Makefile.inc $(srcdir)/spigotmc/Makefile.inc $(srcdir)/springboot/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(srcdir)/tor/Makefile.inc $(srcdir)/traefik/Makefile.inc $(srcdir)/unbound/Makefile.inc $(srcdir)/uwsgi/Makefile.inc $(srcdir)/varnish/Makefile.inc $(srcdir)/w1sensor/Makefile.inc $(srcdir)/web_log/Makefile.inc: - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS) - @$(NORMAL_INSTALL) - @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n' \ - -e 'h;s|.*|.|' \ - -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) { files[d] = files[d] " " $$1; \ - if (++n[d] == $(am__install_max)) { \ - print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ - else { print "f", d "/" $$4, $$1 } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \ - $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-dist_pluginsSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 's,.*/,,;$(transform)'`; \ - dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) -install-dist_pythonSCRIPTS: $(dist_python_SCRIPTS) - @$(NORMAL_INSTALL) - @list='$(dist_python_SCRIPTS)'; test -n "$(pythondir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pythondir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pythondir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n' \ - -e 'h;s|.*|.|' \ - -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) { files[d] = files[d] " " $$1; \ - if (++n[d] == $(am__install_max)) { \ - print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ - else { print "f", d "/" $$4, $$1 } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pythondir)$$dir'"; \ - $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pythondir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-dist_pythonSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_SCRIPTS)'; test -n "$(pythondir)" || exit 0; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 's,.*/,,;$(transform)'`; \ - dir='$(DESTDIR)$(pythondir)'; $(am__uninstall_files_from_dir) -install-dist_basesDATA: $(dist_bases_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_bases_DATA)'; test -n "$(basesdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(basesdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(basesdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(basesdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(basesdir)" || exit $$?; \ - done - -uninstall-dist_basesDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_bases_DATA)'; test -n "$(basesdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(basesdir)'; $(am__uninstall_files_from_dir) -install-dist_bases_framework_servicesDATA: $(dist_bases_framework_services_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_bases_framework_services_DATA)'; test -n "$(bases_framework_servicesdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bases_framework_servicesdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bases_framework_servicesdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bases_framework_servicesdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(bases_framework_servicesdir)" || exit $$?; \ - done - -uninstall-dist_bases_framework_servicesDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_bases_framework_services_DATA)'; test -n "$(bases_framework_servicesdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(bases_framework_servicesdir)'; $(am__uninstall_files_from_dir) -install-dist_libconfigDATA: $(dist_libconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \ - done - -uninstall-dist_libconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir) -install-dist_pythonDATA: $(dist_python_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_DATA)'; test -n "$(pythondir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pythondir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pythondir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythondir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pythondir)" || exit $$?; \ - done - -uninstall-dist_pythonDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_DATA)'; test -n "$(pythondir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pythondir)'; $(am__uninstall_files_from_dir) -install-dist_python_urllib3DATA: $(dist_python_urllib3_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_urllib3_DATA)'; test -n "$(python_urllib3dir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(python_urllib3dir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3dir)" || exit $$?; \ - done - -uninstall-dist_python_urllib3DATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_urllib3_DATA)'; test -n "$(python_urllib3dir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(python_urllib3dir)'; $(am__uninstall_files_from_dir) -install-dist_python_urllib3_backportsDATA: $(dist_python_urllib3_backports_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_urllib3_backports_DATA)'; test -n "$(python_urllib3_backportsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_backportsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(python_urllib3_backportsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_backportsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_backportsdir)" || exit $$?; \ - done - -uninstall-dist_python_urllib3_backportsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_urllib3_backports_DATA)'; test -n "$(python_urllib3_backportsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(python_urllib3_backportsdir)'; $(am__uninstall_files_from_dir) -install-dist_python_urllib3_contribDATA: $(dist_python_urllib3_contrib_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_urllib3_contrib_DATA)'; test -n "$(python_urllib3_contribdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_contribdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(python_urllib3_contribdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_contribdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_contribdir)" || exit $$?; \ - done - -uninstall-dist_python_urllib3_contribDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_urllib3_contrib_DATA)'; test -n "$(python_urllib3_contribdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(python_urllib3_contribdir)'; $(am__uninstall_files_from_dir) -install-dist_python_urllib3_packagesDATA: $(dist_python_urllib3_packages_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_urllib3_packages_DATA)'; test -n "$(python_urllib3_packagesdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_packagesdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(python_urllib3_packagesdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_packagesdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_packagesdir)" || exit $$?; \ - done - -uninstall-dist_python_urllib3_packagesDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_urllib3_packages_DATA)'; test -n "$(python_urllib3_packagesdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(python_urllib3_packagesdir)'; $(am__uninstall_files_from_dir) -install-dist_python_urllib3_securetransportDATA: $(dist_python_urllib3_securetransport_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_urllib3_securetransport_DATA)'; test -n "$(python_urllib3_securetransportdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_securetransportdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(python_urllib3_securetransportdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_securetransportdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_securetransportdir)" || exit $$?; \ - done - -uninstall-dist_python_urllib3_securetransportDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_urllib3_securetransport_DATA)'; test -n "$(python_urllib3_securetransportdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(python_urllib3_securetransportdir)'; $(am__uninstall_files_from_dir) -install-dist_python_urllib3_ssl_match_hostnameDATA: $(dist_python_urllib3_ssl_match_hostname_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_urllib3_ssl_match_hostname_DATA)'; test -n "$(python_urllib3_ssl_match_hostnamedir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" || exit $$?; \ - done - -uninstall-dist_python_urllib3_ssl_match_hostnameDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_urllib3_ssl_match_hostname_DATA)'; test -n "$(python_urllib3_ssl_match_hostnamedir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)'; $(am__uninstall_files_from_dir) -install-dist_python_urllib3_utilDATA: $(dist_python_urllib3_util_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_python_urllib3_util_DATA)'; test -n "$(python_urllib3_utildir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(python_urllib3_utildir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(python_urllib3_utildir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(python_urllib3_utildir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(python_urllib3_utildir)" || exit $$?; \ - done - -uninstall-dist_python_urllib3_utilDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_python_urllib3_util_DATA)'; test -n "$(python_urllib3_utildir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(python_urllib3_utildir)'; $(am__uninstall_files_from_dir) -install-dist_pythonconfigDATA: $(dist_pythonconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_pythonconfig_DATA)'; test -n "$(pythonconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pythonconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pythonconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonconfigdir)" || exit $$?; \ - done - -uninstall-dist_pythonconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_pythonconfig_DATA)'; test -n "$(pythonconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pythonconfigdir)'; $(am__uninstall_files_from_dir) -install-dist_pythonmodulesDATA: $(dist_pythonmodules_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_pythonmodules_DATA)'; test -n "$(pythonmodulesdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pythonmodulesdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pythonmodulesdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonmodulesdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonmodulesdir)" || exit $$?; \ - done - -uninstall-dist_pythonmodulesDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_pythonmodules_DATA)'; test -n "$(pythonmodulesdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pythonmodulesdir)'; $(am__uninstall_files_from_dir) -install-dist_pythonyaml2DATA: $(dist_pythonyaml2_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_pythonyaml2_DATA)'; test -n "$(pythonyaml2dir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pythonyaml2dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pythonyaml2dir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonyaml2dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonyaml2dir)" || exit $$?; \ - done - -uninstall-dist_pythonyaml2DATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_pythonyaml2_DATA)'; test -n "$(pythonyaml2dir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pythonyaml2dir)'; $(am__uninstall_files_from_dir) -install-dist_pythonyaml3DATA: $(dist_pythonyaml3_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_pythonyaml3_DATA)'; test -n "$(pythonyaml3dir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pythonyaml3dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pythonyaml3dir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonyaml3dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonyaml3dir)" || exit $$?; \ - done - -uninstall-dist_pythonyaml3DATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_pythonyaml3_DATA)'; test -n "$(pythonyaml3dir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pythonyaml3dir)'; $(am__uninstall_files_from_dir) -install-dist_third_partyDATA: $(dist_third_party_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_third_party_DATA)'; test -n "$(third_partydir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(third_partydir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(third_partydir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(third_partydir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(third_partydir)" || exit $$?; \ - done - -uninstall-dist_third_partyDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_third_party_DATA)'; test -n "$(third_partydir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(third_partydir)'; $(am__uninstall_files_from_dir) -install-dist_userpythonconfigDATA: $(dist_userpythonconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_userpythonconfig_DATA)'; test -n "$(userpythonconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(userpythonconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(userpythonconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userpythonconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(userpythonconfigdir)" || exit $$?; \ - done - -uninstall-dist_userpythonconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_userpythonconfig_DATA)'; test -n "$(userpythonconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(userpythonconfigdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(SCRIPTS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(pythondir)" "$(DESTDIR)$(basesdir)" "$(DESTDIR)$(bases_framework_servicesdir)" "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(pythondir)" "$(DESTDIR)$(python_urllib3dir)" "$(DESTDIR)$(python_urllib3_backportsdir)" "$(DESTDIR)$(python_urllib3_contribdir)" "$(DESTDIR)$(python_urllib3_packagesdir)" "$(DESTDIR)$(python_urllib3_securetransportdir)" "$(DESTDIR)$(python_urllib3_ssl_match_hostnamedir)" "$(DESTDIR)$(python_urllib3_utildir)" "$(DESTDIR)$(pythonconfigdir)" "$(DESTDIR)$(pythonmodulesdir)" "$(DESTDIR)$(pythonyaml2dir)" "$(DESTDIR)$(pythonyaml3dir)" "$(DESTDIR)$(third_partydir)" "$(DESTDIR)$(userpythonconfigdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_basesDATA \ - install-dist_bases_framework_servicesDATA \ - install-dist_libconfigDATA install-dist_pluginsSCRIPTS \ - install-dist_pythonDATA install-dist_pythonSCRIPTS \ - install-dist_python_urllib3DATA \ - install-dist_python_urllib3_backportsDATA \ - install-dist_python_urllib3_contribDATA \ - install-dist_python_urllib3_packagesDATA \ - install-dist_python_urllib3_securetransportDATA \ - install-dist_python_urllib3_ssl_match_hostnameDATA \ - install-dist_python_urllib3_utilDATA \ - install-dist_pythonconfigDATA install-dist_pythonmodulesDATA \ - install-dist_pythonyaml2DATA install-dist_pythonyaml3DATA \ - install-dist_third_partyDATA install-dist_userpythonconfigDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_basesDATA \ - uninstall-dist_bases_framework_servicesDATA \ - uninstall-dist_libconfigDATA uninstall-dist_pluginsSCRIPTS \ - uninstall-dist_pythonDATA uninstall-dist_pythonSCRIPTS \ - uninstall-dist_python_urllib3DATA \ - uninstall-dist_python_urllib3_backportsDATA \ - uninstall-dist_python_urllib3_contribDATA \ - uninstall-dist_python_urllib3_packagesDATA \ - uninstall-dist_python_urllib3_securetransportDATA \ - uninstall-dist_python_urllib3_ssl_match_hostnameDATA \ - uninstall-dist_python_urllib3_utilDATA \ - uninstall-dist_pythonconfigDATA \ - uninstall-dist_pythonmodulesDATA \ - uninstall-dist_pythonyaml2DATA uninstall-dist_pythonyaml3DATA \ - uninstall-dist_third_partyDATA \ - uninstall-dist_userpythonconfigDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ - ctags-am distclean distclean-generic distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dist_basesDATA \ - install-dist_bases_framework_servicesDATA \ - install-dist_libconfigDATA install-dist_pluginsSCRIPTS \ - install-dist_pythonDATA install-dist_pythonSCRIPTS \ - install-dist_python_urllib3DATA \ - install-dist_python_urllib3_backportsDATA \ - install-dist_python_urllib3_contribDATA \ - install-dist_python_urllib3_packagesDATA \ - install-dist_python_urllib3_securetransportDATA \ - install-dist_python_urllib3_ssl_match_hostnameDATA \ - install-dist_python_urllib3_utilDATA \ - install-dist_pythonconfigDATA install-dist_pythonmodulesDATA \ - install-dist_pythonyaml2DATA install-dist_pythonyaml3DATA \ - install-dist_third_partyDATA install-dist_userpythonconfigDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags-am \ - uninstall uninstall-am uninstall-dist_basesDATA \ - uninstall-dist_bases_framework_servicesDATA \ - uninstall-dist_libconfigDATA uninstall-dist_pluginsSCRIPTS \ - uninstall-dist_pythonDATA uninstall-dist_pythonSCRIPTS \ - uninstall-dist_python_urllib3DATA \ - uninstall-dist_python_urllib3_backportsDATA \ - uninstall-dist_python_urllib3_contribDATA \ - uninstall-dist_python_urllib3_packagesDATA \ - uninstall-dist_python_urllib3_securetransportDATA \ - uninstall-dist_python_urllib3_ssl_match_hostnameDATA \ - uninstall-dist_python_urllib3_utilDATA \ - uninstall-dist_pythonconfigDATA \ - uninstall-dist_pythonmodulesDATA \ - uninstall-dist_pythonyaml2DATA uninstall-dist_pythonyaml3DATA \ - uninstall-dist_third_partyDATA \ - uninstall-dist_userpythonconfigDATA - -.in: - if sed \ - -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \ - -e 's#[@]sbindir_POST@#$(sbindir)#g' \ - -e 's#[@]sysconfdir_POST@#$(sysconfdir)#g' \ - -e 's#[@]pythondir_POST@#$(pythondir)#g' \ - -e 's#[@]configdir_POST@#$(configdir)#g' \ - -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \ - -e 's#[@]cachedir_POST@#$(cachedir)#g' \ - $< > $@.tmp; then \ - mv "$@.tmp" "$@"; \ - else \ - rm -f "$@.tmp"; \ - false; \ - fi - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/collectors/python.d.plugin/README.md b/collectors/python.d.plugin/README.md index 673fc2c9..8955197a 100644 --- a/collectors/python.d.plugin/README.md +++ b/collectors/python.d.plugin/README.md @@ -9,21 +9,6 @@ 5. Allows each **module** to have one or more data collection **jobs** 6. Each **job** is collecting one or more metrics from a single data source -## Pull Request Checklist for Python Plugins - -This is a generic checklist for submitting a new Python plugin for Netdata. It is by no means comprehensive. - -At minimum, to be buildable and testable, the PR needs to include: - -* The module itself, following proper naming conventions: `python.d/<module_dir>/<module_name>.chart.py` -* A README.md file for the plugin under `python.d/<module_dir>`. -* The configuration file for the module: `conf.d/python.d/<module_name>.conf`. Python config files are in YAML format, and should include comments describing what options are present. The instructions are also needed in the configuration section of the README.md -* A basic configuration for the plugin in the appropriate global config file: `conf.d/python.d.conf`, which is also in YAML format. Either add a line that reads `# <module_name>: yes` if the module is to be enabled by default, or one that reads `<module_name>: no` if it is to be disabled by default. -* A line for the plugin in `python.d/Makefile.am` under `dist_python_DATA`. -* A line for the plugin configuration file in `conf.d/Makefile.am`, under `dist_pythonconfig_DATA` -* Optionally, chart information in `web/dashboard_info.js`. This generally involves specifying a name and icon for the section, and may include descriptions for the section or individual charts. - - ## Disclaimer Every module should be compatible with python2 and python3. @@ -36,7 +21,6 @@ Every configuration file must have one of two formats: ```yaml update_every : 2 # update frequency -retries : 1 # how many failures in update() is tolerated priority : 20000 # where it is shown on dashboard other_var1 : bla # variables passed to module @@ -48,7 +32,6 @@ other_var2 : alb ```yaml # module defaults: update_every : 2 -retries : 1 priority : 20000 local: # job name @@ -57,13 +40,25 @@ local: # job name other_job: priority : 5 # job position on dashboard - retries : 20 # job retries other_var2 : val # module specific variable ``` -`update_every`, `retries`, and `priority` are always optional. +`update_every` and `priority` are always optional. ---- +## How to debug a python module + +``` +# become user netdata +sudo su -s /bin/bash netdata +``` +Depending on where Netdata was installed, execute one of the following commands to trace the execution of a python module: + +``` +# execute the plugin in debug mode, for a specific module +/opt/netdata/usr/libexec/netdata/plugins.d/python.d.plugin <module> debug trace +/usr/libexec/netdata/plugins.d/python.d.plugin <module> debug trace +``` +Where `[module]` is the directory name under https://github.com/netdata/netdata/tree/master/collectors/python.d.plugin ## How to write a new module @@ -74,7 +69,9 @@ Writing new python module is simple. You just need to remember to include 5 majo - **_get_data** method - all code needs to be compatible with Python 2 (**≥ 2.7**) *and* 3 (**≥ 3.1**) -If you plan to submit the module in a PR, make sure and go through the [PR checklist for new modules](#pull-request-checklist-for-python-plugins) beforehand to make sure you have updated all the files you need to. +If you plan to submit the module in a PR, make sure and go through the [PR checklist for new modules](#pull-request-checklist-for-python-plugins) beforehand to make sure you have updated all the files you need to. + +For a quick start, you can look at the [example plugin](example/example.chart.py). ### Global variables `ORDER` and `CHART` @@ -210,3 +207,19 @@ Sockets are accessed in non-blocking mode with 15 second timeout. After every execution of `_get_raw_data` socket is closed, to prevent this module needs to set `_keep_alive` variable to `True` and implement custom `_check_raw_data` method. `_check_raw_data` should take raw data and return `True` if all data is received otherwise it should return `False`. Also it should do it in fast and efficient way. + +## Pull Request Checklist for Python Plugins + +This is a generic checklist for submitting a new Python plugin for Netdata. It is by no means comprehensive. + +At minimum, to be buildable and testable, the PR needs to include: + +* The module itself, following proper naming conventions: `python.d/<module_dir>/<module_name>.chart.py` +* A README.md file for the plugin under `python.d/<module_dir>`. +* The configuration file for the module: `conf.d/python.d/<module_name>.conf`. Python config files are in YAML format, and should include comments describing what options are present. The instructions are also needed in the configuration section of the README.md +* A basic configuration for the plugin in the appropriate global config file: `conf.d/python.d.conf`, which is also in YAML format. Either add a line that reads `# <module_name>: yes` if the module is to be enabled by default, or one that reads `<module_name>: no` if it is to be disabled by default. +* A line for the plugin in `python.d/Makefile.am` under `dist_python_DATA`. +* A line for the plugin configuration file in `conf.d/Makefile.am`, under `dist_pythonconfig_DATA` +* Optionally, chart information in `web/dashboard_info.js`. This generally involves specifying a name and icon for the section, and may include descriptions for the section or individual charts. + +[]() diff --git a/collectors/python.d.plugin/adaptec_raid/README.md b/collectors/python.d.plugin/adaptec_raid/README.md index 499dc919..682280f2 100644 --- a/collectors/python.d.plugin/adaptec_raid/README.md +++ b/collectors/python.d.plugin/adaptec_raid/README.md @@ -44,3 +44,5 @@ adaptec_raid: yes  --- + +[]() diff --git a/collectors/python.d.plugin/adaptec_raid/adaptec_raid.conf b/collectors/python.d.plugin/adaptec_raid/adaptec_raid.conf index 253cbf5a..fa462ec8 100644 --- a/collectors/python.d.plugin/adaptec_raid/adaptec_raid.conf +++ b/collectors/python.d.plugin/adaptec_raid/adaptec_raid.conf @@ -19,11 +19,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -50,6 +48,6 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # ---------------------------------------------------------------------- diff --git a/collectors/python.d.plugin/apache/README.md b/collectors/python.d.plugin/apache/README.md index c6d1d126..090feb07 100644 --- a/collectors/python.d.plugin/apache/README.md +++ b/collectors/python.d.plugin/apache/README.md @@ -46,14 +46,14 @@ priority : 90100 local: url : 'http://localhost/server-status?auto' - retries : 20 remote: url : 'http://www.apache.org/server-status?auto' update_every : 5 - retries : 4 ``` Without configuration, module attempts to connect to `http://localhost/server-status?auto` --- + +[]() diff --git a/collectors/python.d.plugin/apache/apache.chart.py b/collectors/python.d.plugin/apache/apache.chart.py index d136274d..655616d0 100644 --- a/collectors/python.d.plugin/apache/apache.chart.py +++ b/collectors/python.d.plugin/apache/apache.chart.py @@ -5,64 +5,60 @@ from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 - -# default job configuration (overridden by python.d.plugin) -# config = {'local': { -# 'update_every': update_every, -# 'retries': retries, -# 'priority': priority, -# 'url': 'http://www.apache.org/server-status?auto' -# }} - -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['requests', 'connections', 'conns_async', 'net', 'workers', 'reqpersec', 'bytespersec', 'bytesperreq'] + +ORDER = [ + 'requests', + 'connections', + 'conns_async', + 'net', + 'workers', + 'reqpersec', + 'bytespersec', + 'bytesperreq', +] CHARTS = { 'bytesperreq': { - 'options': [None, 'apache Lifetime Avg. Response Size', 'bytes/request', + 'options': [None, 'Lifetime Avg. Request Size', 'KiB', 'statistics', 'apache.bytesperreq', 'area'], 'lines': [ - ['size_req'] + ['size_req', 'size', 'absolute', 1, 1024 * 100000] ]}, 'workers': { - 'options': [None, 'apache Workers', 'workers', 'workers', 'apache.workers', 'stacked'], + 'options': [None, 'Workers', 'workers', 'workers', 'apache.workers', 'stacked'], 'lines': [ ['idle'], ['busy'], ]}, 'reqpersec': { - 'options': [None, 'apache Lifetime Avg. Requests/s', 'requests/s', 'statistics', + 'options': [None, 'Lifetime Avg. Requests/s', 'requests/s', 'statistics', 'apache.reqpersec', 'area'], 'lines': [ - ['requests_sec'] + ['requests_sec', 'requests', 'absolute', 1, 100000] ]}, 'bytespersec': { - 'options': [None, 'apache Lifetime Avg. Bandwidth/s', 'kilobits/s', 'statistics', + 'options': [None, 'Lifetime Avg. Bandwidth/s', 'kilobits/s', 'statistics', 'apache.bytesperreq', 'area'], 'lines': [ - ['size_sec', None, 'absolute', 8, 1000] + ['size_sec', None, 'absolute', 8, 1000 * 100000] ]}, 'requests': { - 'options': [None, 'apache Requests', 'requests/s', 'requests', 'apache.requests', 'line'], + 'options': [None, 'Requests', 'requests/s', 'requests', 'apache.requests', 'line'], 'lines': [ ['requests', None, 'incremental'] ]}, 'net': { - 'options': [None, 'apache Bandwidth', 'kilobits/s', 'bandwidth', 'apache.net', 'area'], + 'options': [None, 'Bandwidth', 'kilobits/s', 'bandwidth', 'apache.net', 'area'], 'lines': [ ['sent', None, 'incremental', 8, 1] ]}, 'connections': { - 'options': [None, 'apache Connections', 'connections', 'connections', 'apache.connections', 'line'], + 'options': [None, 'Connections', 'connections', 'connections', 'apache.connections', 'line'], 'lines': [ ['connections'] ]}, 'conns_async': { - 'options': [None, 'apache Async Connections', 'connections', 'connections', 'apache.conns_async', 'stacked'], + 'options': [None, 'Async Connections', 'connections', 'connections', 'apache.conns_async', 'stacked'], 'lines': [ ['keepalive'], ['closing'], @@ -86,6 +82,14 @@ ASSIGNMENT = { 'ConnsAsyncWriting': 'writing' } +FLOAT_VALUES = [ + 'BytesPerReq', + 'ReqPerSec', + 'BytesPerSec', +] + +LIGHTTPD_MARKER = 'idle_servers' + class Service(UrlService): def __init__(self, configuration=None, name=None): @@ -96,20 +100,15 @@ class Service(UrlService): def check(self): self._manager = self._build_manager() + data = self._get_data() + if not data: return None - if 'idle_servers' in data: - self.module_name = 'lighttpd' - for chart in self.definitions: - if chart == 'workers': - lines = self.definitions[chart]['lines'] - lines[0] = ['idle_servers', 'idle'] - lines[1] = ['busy_servers', 'busy'] - opts = self.definitions[chart]['options'] - opts[1] = opts[1].replace('apache', 'lighttpd') - opts[4] = opts[4].replace('apache', 'lighttpd') + if LIGHTTPD_MARKER in data: + self.turn_into_lighttpd() + return True def _get_data(self): @@ -118,15 +117,44 @@ class Service(UrlService): :return: dict """ raw_data = self._get_raw_data() + if not raw_data: return None + data = dict() - for row in raw_data.split('\n'): - tmp = row.split(':') - if tmp[0] in ASSIGNMENT: - try: - data[ASSIGNMENT[tmp[0]]] = int(float(tmp[1])) - except (IndexError, ValueError): - continue + for line in raw_data.split('\n'): + try: + parse_line(line, data) + except ValueError: + continue + return data or None + + def turn_into_lighttpd(self): + self.module_name = 'lighttpd' + for chart in self.definitions: + if chart == 'workers': + lines = self.definitions[chart]['lines'] + lines[0] = ['idle_servers', 'idle'] + lines[1] = ['busy_servers', 'busy'] + opts = self.definitions[chart]['options'] + opts[1] = opts[1].replace('apache', 'lighttpd') + opts[4] = opts[4].replace('apache', 'lighttpd') + + +def parse_line(line, data): + parts = line.split(':') + + if len(parts) != 2: + return + + key, value = parts[0], parts[1] + + if key not in ASSIGNMENT: + return + + if key in FLOAT_VALUES: + data[ASSIGNMENT[key]] = int((float(value) * 100000)) + else: + data[ASSIGNMENT[key]] = int(value) diff --git a/collectors/python.d.plugin/apache/apache.conf b/collectors/python.d.plugin/apache/apache.conf index 8b606f7e..84e12a57 100644 --- a/collectors/python.d.plugin/apache/apache.conf +++ b/collectors/python.d.plugin/apache/apache.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, apache also supports the following: diff --git a/collectors/python.d.plugin/beanstalk/README.md b/collectors/python.d.plugin/beanstalk/README.md index c2d7d578..8daa3660 100644 --- a/collectors/python.d.plugin/beanstalk/README.md +++ b/collectors/python.d.plugin/beanstalk/README.md @@ -101,3 +101,5 @@ port : 11300 If no configuration is given, module will attempt to connect to beanstalkd on `127.0.0.1:11300` address --- + +[]() diff --git a/collectors/python.d.plugin/beanstalk/beanstalk.chart.py b/collectors/python.d.plugin/beanstalk/beanstalk.chart.py index 1472b4e1..ed945a78 100644 --- a/collectors/python.d.plugin/beanstalk/beanstalk.chart.py +++ b/collectors/python.d.plugin/beanstalk/beanstalk.chart.py @@ -12,13 +12,18 @@ except ImportError: from bases.FrameworkServices.SimpleService import SimpleService from bases.loaders import safe_load -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 -ORDER = ['cpu_usage', 'jobs_rate', 'connections_rate', 'commands_rate', 'current_tubes', 'current_jobs', - 'current_connections', 'binlog', 'uptime'] +ORDER = [ + 'cpu_usage', + 'jobs_rate', + 'connections_rate', + 'commands_rate', + 'current_tubes', + 'current_jobs', + 'current_connections', + 'binlog', + 'uptime', +] CHARTS = { 'cpu_usage': { diff --git a/collectors/python.d.plugin/beanstalk/beanstalk.conf b/collectors/python.d.plugin/beanstalk/beanstalk.conf index 3b11d919..7586ad26 100644 --- a/collectors/python.d.plugin/beanstalk/beanstalk.conf +++ b/collectors/python.d.plugin/beanstalk/beanstalk.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -68,7 +66,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # chart_cleanup: 10 # the JOB's chart cleanup interval in iterations # diff --git a/collectors/python.d.plugin/bind_rndc/README.md b/collectors/python.d.plugin/bind_rndc/README.md index 688297ab..fefe7493 100644 --- a/collectors/python.d.plugin/bind_rndc/README.md +++ b/collectors/python.d.plugin/bind_rndc/README.md @@ -58,3 +58,5 @@ local: If no configuration is given, module will attempt to read named.stats file at `/var/log/bind/named.stats` --- + +[]() diff --git a/collectors/python.d.plugin/bind_rndc/bind_rndc.chart.py b/collectors/python.d.plugin/bind_rndc/bind_rndc.chart.py index 423232f6..7ac1bc3d 100644 --- a/collectors/python.d.plugin/bind_rndc/bind_rndc.chart.py +++ b/collectors/python.d.plugin/bind_rndc/bind_rndc.chart.py @@ -11,11 +11,15 @@ from subprocess import Popen from bases.collection import find_binary from bases.FrameworkServices.SimpleService import SimpleService -priority = 60000 -retries = 60 + update_every = 30 -ORDER = ['name_server_statistics', 'incoming_queries', 'outgoing_queries', 'named_stats_size'] +ORDER = [ + 'name_server_statistics', + 'incoming_queries', + 'outgoing_queries', + 'named_stats_size', +] CHARTS = { 'name_server_statistics': { @@ -44,7 +48,7 @@ CHARTS = { 'lines': [ ]}, 'named_stats_size': { - 'options': [None, 'Named Stats File Size', 'MB', 'file size', 'bind_rndc.stats_size', 'line'], + 'options': [None, 'Named Stats File Size', 'MiB', 'file size', 'bind_rndc.stats_size', 'line'], 'lines': [ ['stats_size', None, 'absolute', 1, 1 << 20] ] @@ -92,10 +96,20 @@ class Service(SimpleService): self.definitions = CHARTS self.named_stats_path = self.configuration.get('named_stats_path', '/var/log/bind/named.stats') self.rndc = find_binary('rndc') - self.data = dict(nms_requests=0, nms_responses=0, nms_failure=0, nms_auth=0, - nms_non_auth=0, nms_nxrrset=0, nms_success=0, nms_nxdomain=0, - nms_recursion=0, nms_duplicate=0, nms_rejected_queries=0, - nms_dropped_queries=0) + self.data = dict( + nms_requests=0, + nms_responses=0, + nms_failure=0, + nms_auth=0, + nms_non_auth=0, + nms_nxrrset=0, + nms_success=0, + nms_nxdomain=0, + nms_recursion=0, + nms_duplicate=0, + nms_rejected_queries=0, + nms_dropped_queries=0, + ) def check(self): if not self.rndc: diff --git a/collectors/python.d.plugin/bind_rndc/bind_rndc.conf b/collectors/python.d.plugin/bind_rndc/bind_rndc.conf index 71958ff9..3b7e9a21 100644 --- a/collectors/python.d.plugin/bind_rndc/bind_rndc.conf +++ b/collectors/python.d.plugin/bind_rndc/bind_rndc.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, bind_rndc also supports the following: diff --git a/collectors/python.d.plugin/boinc/README.md b/collectors/python.d.plugin/boinc/README.md index 595bcd3c..0f0aa1c6 100644 --- a/collectors/python.d.plugin/boinc/README.md +++ b/collectors/python.d.plugin/boinc/README.md @@ -26,3 +26,5 @@ remote: ``` --- + +[]() diff --git a/collectors/python.d.plugin/boinc/boinc.chart.py b/collectors/python.d.plugin/boinc/boinc.chart.py index d14754c4..e10b28ce 100644 --- a/collectors/python.d.plugin/boinc/boinc.chart.py +++ b/collectors/python.d.plugin/boinc/boinc.chart.py @@ -10,7 +10,12 @@ from bases.FrameworkServices.SimpleService import SimpleService from third_party import boinc_client -ORDER = ['tasks', 'states', 'sched_states', 'process_states'] +ORDER = [ + 'tasks', + 'states', + 'sched_states', + 'process_states', +] CHARTS = { 'tasks': { @@ -141,14 +146,16 @@ class Service(SimpleService): def _get_data(self): if not self.is_alive(): return None + data = dict(_DATA_TEMPLATE) - results = [] + try: results = self.client.get_tasks() except socket.error: self.error('Connection is dead') self.alive = False return None + for task in results: data['total'] += 1 data[_TASK_MAP[task.state]] += 1 @@ -159,4 +166,5 @@ class Service(SimpleService): data[_PROC_MAP[task.active_task_state]] += 1 except AttributeError: pass - return data + + return data or None diff --git a/collectors/python.d.plugin/boinc/boinc.conf b/collectors/python.d.plugin/boinc/boinc.conf index e59d2509..16edf55c 100644 --- a/collectors/python.d.plugin/boinc/boinc.conf +++ b/collectors/python.d.plugin/boinc/boinc.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, boinc also supports the following: diff --git a/collectors/python.d.plugin/ceph/README.md b/collectors/python.d.plugin/ceph/README.md index 29dfe5d1..1f067c61 100644 --- a/collectors/python.d.plugin/ceph/README.md +++ b/collectors/python.d.plugin/ceph/README.md @@ -30,3 +30,5 @@ local: ``` --- + +[]() diff --git a/collectors/python.d.plugin/ceph/ceph.chart.py b/collectors/python.d.plugin/ceph/ceph.chart.py index 31c764d0..45b52620 100644 --- a/collectors/python.d.plugin/ceph/ceph.chart.py +++ b/collectors/python.d.plugin/ceph/ceph.chart.py @@ -9,14 +9,13 @@ try: except ImportError: CEPH = False -import os import json +import os + from bases.FrameworkServices.SimpleService import SimpleService # default module values (can be overridden per job in `config`) update_every = 10 -priority = 60000 -retries = 60 ORDER = [ 'general_usage', @@ -37,7 +36,7 @@ ORDER = [ CHARTS = { 'general_usage': { - 'options': [None, 'Ceph General Space', 'KB', 'general', 'ceph.general_usage', 'stacked'], + 'options': [None, 'Ceph General Space', 'KiB', 'general', 'ceph.general_usage', 'stacked'], 'lines': [ ['general_available', 'avail', 'absolute'], ['general_usage', 'used', 'absolute'] @@ -50,7 +49,7 @@ CHARTS = { ] }, 'general_bytes': { - 'options': [None, 'Ceph General Read/Write Data/s', 'KB', 'general', 'ceph.general_bytes', + 'options': [None, 'Ceph General Read/Write Data/s', 'KiB/s', 'general', 'ceph.general_bytes', 'area'], 'lines': [ ['general_read_bytes', 'read', 'absolute', 1, 1024], @@ -74,7 +73,7 @@ CHARTS = { ] }, 'pool_usage': { - 'options': [None, 'Ceph Pools', 'KB', 'pool', 'ceph.pool_usage', 'line'], + 'options': [None, 'Ceph Pools', 'KiB', 'pool', 'ceph.pool_usage', 'line'], 'lines': [] }, 'pool_objects': { @@ -82,11 +81,11 @@ CHARTS = { 'lines': [] }, 'pool_read_bytes': { - 'options': [None, 'Ceph Read Pool Data/s', 'KB', 'pool', 'ceph.pool_read_bytes', 'area'], + 'options': [None, 'Ceph Read Pool Data/s', 'KiB/s', 'pool', 'ceph.pool_read_bytes', 'area'], 'lines': [] }, 'pool_write_bytes': { - 'options': [None, 'Ceph Write Pool Data/s', 'KB', 'pool', 'ceph.pool_write_bytes', 'area'], + 'options': [None, 'Ceph Write Pool Data/s', 'KiB/s', 'pool', 'ceph.pool_write_bytes', 'area'], 'lines': [] }, 'pool_read_operations': { @@ -98,7 +97,7 @@ CHARTS = { 'lines': [] }, 'osd_usage': { - 'options': [None, 'Ceph OSDs', 'KB', 'osd', 'ceph.osd_usage', 'line'], + 'options': [None, 'Ceph OSDs', 'KiB', 'osd', 'ceph.osd_usage', 'line'], 'lines': [] }, 'osd_apply_latency': { @@ -320,7 +319,7 @@ class Service(SimpleService): return json.loads(self.cluster.mon_command(json.dumps({ 'prefix': 'osd df', 'format': 'json' - }), '')[1]) + }), '')[1].replace('-nan', '"-nan"')) def _get_osd_perf(self): """ diff --git a/collectors/python.d.plugin/ceph/ceph.conf b/collectors/python.d.plugin/ceph/ceph.conf index 78ac1e25..4caabbf6 100644 --- a/collectors/python.d.plugin/ceph/ceph.conf +++ b/collectors/python.d.plugin/ceph/ceph.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 10 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, ceph plugin also supports the following: diff --git a/collectors/python.d.plugin/chrony/README.md b/collectors/python.d.plugin/chrony/README.md index 30636fe7..67ed1a05 100644 --- a/collectors/python.d.plugin/chrony/README.md +++ b/collectors/python.d.plugin/chrony/README.md @@ -29,3 +29,5 @@ local: ``` --- + +[]() diff --git a/collectors/python.d.plugin/chrony/chrony.chart.py b/collectors/python.d.plugin/chrony/chrony.chart.py index fd01d4e8..91f72500 100644 --- a/collectors/python.d.plugin/chrony/chrony.chart.py +++ b/collectors/python.d.plugin/chrony/chrony.chart.py @@ -7,11 +7,19 @@ from bases.FrameworkServices.ExecutableService import ExecutableService # default module values (can be overridden per job in `config`) update_every = 5 -priority = 60000 -retries = 10 + +CHRONY_COMMAND = 'chronyc -n tracking' # charts order (can be overridden if you want less charts, or different order) -ORDER = ['system', 'offsets', 'stratum', 'root', 'frequency', 'residualfreq', 'skew'] +ORDER = [ + 'system', + 'offsets', + 'stratum', + 'root', + 'frequency', + 'residualfreq', + 'skew', +] CHARTS = { 'system': { @@ -77,9 +85,9 @@ class Service(ExecutableService): def __init__(self, configuration=None, name=None): ExecutableService.__init__( self, configuration=configuration, name=name) - self.command = 'chronyc -n tracking' self.order = ORDER self.definitions = CHARTS + self.command = CHRONY_COMMAND def _get_data(self): """ diff --git a/collectors/python.d.plugin/chrony/chrony.conf b/collectors/python.d.plugin/chrony/chrony.conf index 9ac906b5..fd95519b 100644 --- a/collectors/python.d.plugin/chrony/chrony.conf +++ b/collectors/python.d.plugin/chrony/chrony.conf @@ -27,11 +27,9 @@ update_every: 5 # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ update_every: 5 # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, chrony also supports the following: diff --git a/collectors/python.d.plugin/couchdb/README.md b/collectors/python.d.plugin/couchdb/README.md index eff8c081..2cc353ed 100644 --- a/collectors/python.d.plugin/couchdb/README.md +++ b/collectors/python.d.plugin/couchdb/README.md @@ -33,3 +33,5 @@ local: ``` --- + +[]() diff --git a/collectors/python.d.plugin/couchdb/couchdb.chart.py b/collectors/python.d.plugin/couchdb/couchdb.chart.py index 5d6b9916..a58694d7 100644 --- a/collectors/python.d.plugin/couchdb/couchdb.chart.py +++ b/collectors/python.d.plugin/couchdb/couchdb.chart.py @@ -8,6 +8,7 @@ from collections import namedtuple, defaultdict from json import loads from threading import Thread from socket import gethostbyname, gaierror + try: from queue import Queue except ImportError: @@ -15,10 +16,9 @@ except ImportError: from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) + update_every = 1 -priority = 60000 -retries = 60 + METHODS = namedtuple('METHODS', ['get_data', 'url', 'stats']) @@ -109,7 +109,7 @@ ORDER = [ CHARTS = { 'activity': { - 'options': [None, 'Overall Activity', 'req/s', + 'options': [None, 'Overall Activity', 'requests/s', 'dbactivity', 'couchdb.activity', 'stacked'], 'lines': [ ['couchdb_database_reads', 'DB reads', 'incremental'], @@ -118,7 +118,7 @@ CHARTS = { ] }, 'request_methods': { - 'options': [None, 'HTTP request methods', 'req/s', + 'options': [None, 'HTTP request methods', 'requests/s', 'httptraffic', 'couchdb.request_methods', 'stacked'], 'lines': [ @@ -133,7 +133,7 @@ CHARTS = { ] }, 'response_codes': { - 'options': [None, 'HTTP response status codes', 'resp/s', + 'options': [None, 'HTTP response status codes', 'responses/s', 'httptraffic', 'couchdb.response_codes', 'stacked'], 'lines': [ @@ -151,15 +151,13 @@ CHARTS = { ] }, 'open_files': { - 'options': [None, 'Open files', 'files', - 'ops', 'couchdb.open_files', 'line'], + 'options': [None, 'Open files', 'files', 'ops', 'couchdb.open_files', 'line'], 'lines': [ ['couchdb_open_os_files', '# files', 'absolute'] ] }, 'active_tasks': { - 'options': [None, 'Active task breakdown', 'tasks', - 'ops', 'couchdb.active_tasks', 'stacked'], + 'options': [None, 'Active task breakdown', 'tasks', 'ops', 'couchdb.active_tasks', 'stacked'], 'lines': [ ['activetasks_indexer', 'Indexer', 'absolute'], ['activetasks_database_compaction', 'DB Compaction', 'absolute'], @@ -168,8 +166,7 @@ CHARTS = { ] }, 'replicator_jobs': { - 'options': [None, 'Replicator job breakdown', 'jobs', - 'ops', 'couchdb.replicator_jobs', 'stacked'], + 'options': [None, 'Replicator job breakdown', 'jobs', 'ops', 'couchdb.replicator_jobs', 'stacked'], 'lines': [ ['couch_replicator_jobs_running', 'Running', 'absolute'], ['couch_replicator_jobs_pending', 'Pending', 'absolute'], @@ -179,8 +176,7 @@ CHARTS = { ] }, 'erlang_memory': { - 'options': [None, 'Erlang VM memory usage', 'bytes', - 'erlang', 'couchdb.erlang_vm_memory', 'stacked'], + 'options': [None, 'Erlang VM memory usage', 'B', 'erlang', 'couchdb.erlang_vm_memory', 'stacked'], 'lines': [ ['memory_atom', 'atom', 'absolute'], ['memory_binary', 'binaries', 'absolute'], @@ -191,23 +187,20 @@ CHARTS = { ] }, 'erlang_reductions': { - 'options': [None, 'Erlang reductions', 'count', - 'erlang', 'couchdb.reductions', 'line'], + 'options': [None, 'Erlang reductions', 'count', 'erlang', 'couchdb.reductions', 'line'], 'lines': [ ['reductions', 'reductions', 'incremental'] ] }, 'erlang_proc_counts': { - 'options': [None, 'Process counts', 'count', - 'erlang', 'couchdb.proccounts', 'line'], + 'options': [None, 'Process counts', 'count', 'erlang', 'couchdb.proccounts', 'line'], 'lines': [ ['os_proc_count', 'OS procs', 'absolute'], ['process_count', 'erl procs', 'absolute'] ] }, 'erlang_peak_msg_queue': { - 'options': [None, 'Peak message queue size', 'count', - 'erlang', 'couchdb.peakmsgqueue', + 'options': [None, 'Peak message queue size', 'count', 'erlang', 'couchdb.peakmsgqueue', 'line'], 'lines': [ ['peak_msg_queue', 'peak size', 'absolute'] @@ -215,18 +208,15 @@ CHARTS = { }, # Lines for the following are added as part of check() 'db_sizes_file': { - 'options': [None, 'Database sizes (file)', 'KB', - 'perdbstats', 'couchdb.db_sizes_file', 'line'], + 'options': [None, 'Database sizes (file)', 'KiB', 'perdbstats', 'couchdb.db_sizes_file', 'line'], 'lines': [] }, 'db_sizes_external': { - 'options': [None, 'Database sizes (external)', 'KB', - 'perdbstats', 'couchdb.db_sizes_external', 'line'], + 'options': [None, 'Database sizes (external)', 'KiB', 'perdbstats', 'couchdb.db_sizes_external', 'line'], 'lines': [] }, 'db_sizes_active': { - 'options': [None, 'Database sizes (active)', 'KB', - 'perdbstats', 'couchdb.db_sizes_active', 'line'], + 'options': [None, 'Database sizes (active)', 'KiB', 'perdbstats', 'couchdb.db_sizes_active', 'line'], 'lines': [] }, 'db_doc_counts': { @@ -235,8 +225,7 @@ CHARTS = { 'lines': [] }, 'db_doc_del_counts': { - 'options': [None, 'Database # of deleted docs', 'docs', - 'perdbstats', 'couchdb_db_doc_del_count', 'line'], + 'options': [None, 'Database # of deleted docs', 'docs', 'perdbstats', 'couchdb_db_doc_del_count', 'line'], 'lines': [] } } @@ -256,7 +245,7 @@ class Service(UrlService): try: self.dbs = self.configuration.get('databases').split(' ') except (KeyError, AttributeError): - self.dbs = [] + self.dbs = list() def check(self): if not (self.host and self.port): diff --git a/collectors/python.d.plugin/couchdb/couchdb.conf b/collectors/python.d.plugin/couchdb/couchdb.conf index 5f6e75cf..9c68be77 100644 --- a/collectors/python.d.plugin/couchdb/couchdb.conf +++ b/collectors/python.d.plugin/couchdb/couchdb.conf @@ -28,11 +28,9 @@ update_every: 10 # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -59,7 +57,7 @@ update_every: 10 # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, the couchdb plugin also supports the following: diff --git a/collectors/python.d.plugin/cpufreq/README.md b/collectors/python.d.plugin/cpufreq/README.md index 33891d59..f1fc1e8f 100644 --- a/collectors/python.d.plugin/cpufreq/README.md +++ b/collectors/python.d.plugin/cpufreq/README.md @@ -1,5 +1,10 @@ # cpufreq +> THIS MODULE IS OBSOLETE. +> USE THE [PROC PLUGIN](../../proc.plugin) - IT IS MORE EFFICIENT + +--- + This module shows the current CPU frequency as set by the cpufreq kernel module. @@ -28,3 +33,5 @@ If no configuration is given, module will search for cpufreq files in `/sys/devi Directory is also prefixed with `NETDATA_HOST_PREFIX` if specified. --- + +[]() diff --git a/collectors/python.d.plugin/cpufreq/cpufreq.conf b/collectors/python.d.plugin/cpufreq/cpufreq.conf index 0890245d..96c0884c 100644 --- a/collectors/python.d.plugin/cpufreq/cpufreq.conf +++ b/collectors/python.d.plugin/cpufreq/cpufreq.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. diff --git a/collectors/python.d.plugin/cpuidle/README.md b/collectors/python.d.plugin/cpuidle/README.md index 49516963..bb6722a1 100644 --- a/collectors/python.d.plugin/cpuidle/README.md +++ b/collectors/python.d.plugin/cpuidle/README.md @@ -9,3 +9,5 @@ It produces one stacked chart per CPU, showing the percentage of time spent in each state. --- + +[]() diff --git a/collectors/python.d.plugin/cpuidle/cpuidle.conf b/collectors/python.d.plugin/cpuidle/cpuidle.conf index bc276fcd..25f5fed6 100644 --- a/collectors/python.d.plugin/cpuidle/cpuidle.conf +++ b/collectors/python.d.plugin/cpuidle/cpuidle.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. diff --git a/collectors/python.d.plugin/dns_query_time/README.md b/collectors/python.d.plugin/dns_query_time/README.md index 3703e8aa..73d70d3a 100644 --- a/collectors/python.d.plugin/dns_query_time/README.md +++ b/collectors/python.d.plugin/dns_query_time/README.md @@ -8,3 +8,5 @@ This module provides DNS query time statistics. It produces one aggregate chart or one chart per DNS server, showing the query time. --- + +[]() diff --git a/collectors/python.d.plugin/dns_query_time/dns_query_time.chart.py b/collectors/python.d.plugin/dns_query_time/dns_query_time.chart.py index d3c3db78..4a5e0e10 100644 --- a/collectors/python.d.plugin/dns_query_time/dns_query_time.chart.py +++ b/collectors/python.d.plugin/dns_query_time/dns_query_time.chart.py @@ -28,10 +28,7 @@ except ImportError: from bases.FrameworkServices.SimpleService import SimpleService -# default module values (can be overridden per job in `config`) update_every = 5 -priority = 60000 -retries = 60 class Service(SimpleService): @@ -46,14 +43,14 @@ class Service(SimpleService): def check(self): if not DNS_PYTHON: - self.error('\'python-dnspython\' package is needed to use dns_query_time.chart.py') + self.error("'python-dnspython' package is needed to use dns_query_time.chart.py") return False self.timeout = self.timeout if isinstance(self.timeout, int) else 4 if not all([self.domains, self.server_list, isinstance(self.server_list, str), isinstance(self.domains, str)]): - self.error('server_list and domain_list can\'t be empty') + self.error("server_list and domain_list can't be empty") return False else: self.domains, self.server_list = self.domains.split(), self.server_list.split() @@ -129,17 +126,27 @@ def create_charts(aggregate, server_list): } } for ns in server_list: - definitions['dns_group']['lines'].append(['_'.join(['ns', ns.replace('.', '_')]), ns, 'absolute']) + dim = [ + '_'.join(['ns', ns.replace('.', '_')]), + ns, + 'absolute', + ] + definitions['dns_group']['lines'].append(dim) return order, definitions else: order = [''.join(['dns_', ns.replace('.', '_')]) for ns in server_list] definitions = dict() + for ns in server_list: definitions[''.join(['dns_', ns.replace('.', '_')])] = { 'options': [None, 'DNS Response Time', 'ms', ns, 'dns_query_time.response_time', 'area'], 'lines': [ - ['_'.join(['ns', ns.replace('.', '_')]), ns, 'absolute'] + [ + '_'.join(['ns', ns.replace('.', '_')]), + ns, + 'absolute', + ] ] } return order, definitions diff --git a/collectors/python.d.plugin/dns_query_time/dns_query_time.conf b/collectors/python.d.plugin/dns_query_time/dns_query_time.conf index d32c6db8..9c0838ee 100644 --- a/collectors/python.d.plugin/dns_query_time/dns_query_time.conf +++ b/collectors/python.d.plugin/dns_query_time/dns_query_time.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, dns_query_time also supports the following: diff --git a/collectors/python.d.plugin/dnsdist/README.md b/collectors/python.d.plugin/dnsdist/README.md index b646ae27..c7647a11 100644 --- a/collectors/python.d.plugin/dnsdist/README.md +++ b/collectors/python.d.plugin/dnsdist/README.md @@ -52,3 +52,5 @@ localhost: ``` --- + +[]() diff --git a/collectors/python.d.plugin/dnsdist/dnsdist.chart.py b/collectors/python.d.plugin/dnsdist/dnsdist.chart.py index 1aff3f80..d6085865 100644 --- a/collectors/python.d.plugin/dnsdist/dnsdist.chart.py +++ b/collectors/python.d.plugin/dnsdist/dnsdist.chart.py @@ -90,9 +90,9 @@ CHARTS = { ] }, 'servermem': { - 'options': [None, 'DNSDIST server memory utilization', 'MB', 'server', 'dnsdist.servermem', 'area'], + 'options': [None, 'DNSDIST server memory utilization', 'MiB', 'server', 'dnsdist.servermem', 'area'], 'lines': [ - ['real-memory-usage', 'memory usage', 'absolute', 1, 1048576] + ['real-memory-usage', 'memory usage', 'absolute', 1, 1 << 20] ] }, 'query_latency': { diff --git a/collectors/python.d.plugin/dnsdist/dnsdist.conf b/collectors/python.d.plugin/dnsdist/dnsdist.conf index aec58b8e..324d65aa 100644 --- a/collectors/python.d.plugin/dnsdist/dnsdist.conf +++ b/collectors/python.d.plugin/dnsdist/dnsdist.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -#retries: 600000 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # diff --git a/collectors/python.d.plugin/dockerd/README.md b/collectors/python.d.plugin/dockerd/README.md index d3f60380..b09a5d59 100644 --- a/collectors/python.d.plugin/dockerd/README.md +++ b/collectors/python.d.plugin/dockerd/README.md @@ -3,7 +3,7 @@ Module monitor docker health metrics. **Requirement:** -* `docker` package +* `docker` package, required version 3.2.0+ Following charts are drawn: @@ -24,3 +24,5 @@ Following charts are drawn: ``` --- + +[]() diff --git a/collectors/python.d.plugin/dockerd/dockerd.chart.py b/collectors/python.d.plugin/dockerd/dockerd.chart.py index a0d3d7e6..8bd45df9 100644 --- a/collectors/python.d.plugin/dockerd/dockerd.chart.py +++ b/collectors/python.d.plugin/dockerd/dockerd.chart.py @@ -10,10 +10,8 @@ except ImportError: from bases.FrameworkServices.SimpleService import SimpleService -# default module values (can be overridden per job in `config`) -# update_every = 1 -priority = 60000 -retries = 60 +from distutils.version import StrictVersion + # charts order (can be overridden if you want less charts, or different order) ORDER = [ @@ -24,21 +22,21 @@ ORDER = [ CHARTS = { 'running_containers': { - 'options': [None, 'Number of running containers', 'running containers', 'running containers', + 'options': [None, 'Number of running containers', 'containers', 'running containers', 'docker.running_containers', 'line'], 'lines': [ ['running_containers', 'running'] ] }, 'healthy_containers': { - 'options': [None, 'Number of healthy containers', 'healthy containers', 'healthy containers', + 'options': [None, 'Number of healthy containers', 'containers', 'healthy containers', 'docker.healthy_containers', 'line'], 'lines': [ ['healthy_containers', 'healthy'] ] }, 'unhealthy_containers': { - 'options': [None, 'Number of unhealthy containers', 'unhealthy containers', 'unhealthy containers', + 'options': [None, 'Number of unhealthy containers', 'containers', 'unhealthy containers', 'docker.unhealthy_containers', 'line'], 'lines': [ ['unhealthy_containers', 'unhealthy'] @@ -47,15 +45,26 @@ CHARTS = { } +MIN_REQUIRED_VERSION = '3.2.0' + + class Service(SimpleService): def __init__(self, configuration=None, name=None): SimpleService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = CHARTS + self.client = None def check(self): if not HAS_DOCKER: - self.error('\'docker\' package is needed to use docker.chart.py') + self.error("'docker' package is needed to use dockerd module") + return False + + if StrictVersion(docker.__version__) < StrictVersion(MIN_REQUIRED_VERSION): + self.error("installed 'docker' package version {0}, minimum required version {1}, please upgrade".format( + docker.__version__, + MIN_REQUIRED_VERSION, + )) return False self.client = docker.DockerClient(base_url=self.configuration.get('url', 'unix://var/run/docker.sock')) @@ -70,6 +79,7 @@ class Service(SimpleService): def get_data(self): data = dict() + data['running_containers'] = len(self.client.containers.list(sparse=True)) data['healthy_containers'] = len(self.client.containers.list(filters={'health': 'healthy'}, sparse=True)) data['unhealthy_containers'] = len(self.client.containers.list(filters={'health': 'unhealthy'}, sparse=True)) diff --git a/collectors/python.d.plugin/dockerd/dockerd.conf b/collectors/python.d.plugin/dockerd/dockerd.conf index 5ef17a1f..96c8ee0d 100644 --- a/collectors/python.d.plugin/dockerd/dockerd.conf +++ b/collectors/python.d.plugin/dockerd/dockerd.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 10 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, dockerd plugin also supports the following: diff --git a/collectors/python.d.plugin/dovecot/README.md b/collectors/python.d.plugin/dovecot/README.md index 50950ecc..de8788b3 100644 --- a/collectors/python.d.plugin/dovecot/README.md +++ b/collectors/python.d.plugin/dovecot/README.md @@ -1,9 +1,13 @@ # dovecot This module provides statistics information from Dovecot server. + Statistics are taken from dovecot socket by executing `EXPORT global` command. More information about dovecot stats can be found on [project wiki page.](http://wiki2.dovecot.org/Statistics) +Module isn't compatible with new statistic api (v2.3), but you are still able to use the module with Dovecot v2.3 +by following [upgrading steps.](https://wiki2.dovecot.org/Upgrading/2.3). + **Requirement:** Dovecot UNIX socket with R/W permissions for user netdata or Dovecot with configured TCP/IP socket. @@ -71,3 +75,5 @@ localsocket: If no configuration is given, module will attempt to connect to dovecot using unix socket localized in `/var/run/dovecot/stats` --- + +[]() diff --git a/collectors/python.d.plugin/dovecot/dovecot.chart.py b/collectors/python.d.plugin/dovecot/dovecot.chart.py index 7fee3bfa..be1fa53d 100644 --- a/collectors/python.d.plugin/dovecot/dovecot.chart.py +++ b/collectors/python.d.plugin/dovecot/dovecot.chart.py @@ -5,12 +5,10 @@ from bases.FrameworkServices.SocketService import SocketService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 -# charts order (can be overridden if you want less charts, or different order) +UNIX_SOCKET = '/var/run/dovecot/stats' + + ORDER = [ 'sessions', 'logins', @@ -53,14 +51,14 @@ CHARTS = { ] }, 'context_switches': { - 'options': [None, 'Dovecot Context Switches', '', 'context switches', 'dovecot.context_switches', 'line'], + 'options': [None, 'Dovecot Context Switches', 'switches', 'context switches', 'dovecot.context_switches', 'line'], 'lines': [ ['vol_cs', 'voluntary', 'absolute'], ['invol_cs', 'involuntary', 'absolute'] ] }, 'io': { - 'options': [None, 'Dovecot Disk I/O', 'kilobytes/s', 'disk', 'dovecot.io', 'area'], + 'options': [None, 'Dovecot Disk I/O', 'KiB/s', 'disk', 'dovecot.io', 'area'], 'lines': [ ['disk_input', 'read', 'incremental', 1, 1024], ['disk_output', 'write', 'incremental', -1, 1024] @@ -69,8 +67,8 @@ CHARTS = { 'net': { 'options': [None, 'Dovecot Network Bandwidth', 'kilobits/s', 'network', 'dovecot.net', 'area'], 'lines': [ - ['read_bytes', 'read', 'incremental', 8, 1024], - ['write_bytes', 'write', 'incremental', -8, 1024] + ['read_bytes', 'read', 'incremental', 8, 1000], + ['write_bytes', 'write', 'incremental', -8, 1000] ] }, 'syscalls': { @@ -113,13 +111,12 @@ CHARTS = { class Service(SocketService): def __init__(self, configuration=None, name=None): SocketService.__init__(self, configuration=configuration, name=name) - self.request = 'EXPORT\tglobal\r\n' - self.host = None # localhost - self.port = None # 24242 - # self._keep_alive = True - self.unix_socket = '/var/run/dovecot/stats' self.order = ORDER self.definitions = CHARTS + self.host = None # localhost + self.port = None # 24242 + self.unix_socket = UNIX_SOCKET + self.request = 'EXPORT\tglobal\r\n' def _get_data(self): """ diff --git a/collectors/python.d.plugin/dovecot/dovecot.conf b/collectors/python.d.plugin/dovecot/dovecot.conf index 56c39499..451dbc9a 100644 --- a/collectors/python.d.plugin/dovecot/dovecot.conf +++ b/collectors/python.d.plugin/dovecot/dovecot.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, dovecot also supports the following: @@ -94,3 +92,7 @@ localsocket: name : 'local' socket : '/var/run/dovecot/stats' +localsocket_old: + name : 'local' + socket : '/var/run/dovecot/old-stats' + diff --git a/collectors/python.d.plugin/elasticsearch/README.md b/collectors/python.d.plugin/elasticsearch/README.md index 7ce6c0b7..6d25b02d 100644 --- a/collectors/python.d.plugin/elasticsearch/README.md +++ b/collectors/python.d.plugin/elasticsearch/README.md @@ -58,3 +58,5 @@ local: If no configuration is given, module will fail to run. --- + +[]() diff --git a/collectors/python.d.plugin/elasticsearch/elasticsearch.chart.py b/collectors/python.d.plugin/elasticsearch/elasticsearch.chart.py index 3f431f6e..f1ea03fe 100644 --- a/collectors/python.d.plugin/elasticsearch/elasticsearch.chart.py +++ b/collectors/python.d.plugin/elasticsearch/elasticsearch.chart.py @@ -159,17 +159,20 @@ ORDER = [ 'fielddata_evictions_tripped', 'cluster_health_status', 'cluster_health_nodes', + 'cluster_health_pending_tasks', + 'cluster_health_flight_fetch', 'cluster_health_shards', 'cluster_stats_nodes', 'cluster_stats_query_cache', 'cluster_stats_docs', 'cluster_stats_store', - 'cluster_stats_indices_shards', + 'cluster_stats_indices', + 'cluster_stats_shards_total', ] CHARTS = { 'search_performance_total': { - 'options': [None, 'Queries And Fetches', 'number of', 'search performance', + 'options': [None, 'Queries And Fetches', 'events/s', 'search performance', 'elastic.search_performance_total', 'stacked'], 'lines': [ ['indices_search_query_total', 'queries', 'incremental'], @@ -177,7 +180,7 @@ CHARTS = { ] }, 'search_performance_current': { - 'options': [None, 'Queries and Fetches In Progress', 'number of', 'search performance', + 'options': [None, 'Queries and Fetches In Progress', 'events', 'search performance', 'elastic.search_performance_current', 'stacked'], 'lines': [ ['indices_search_query_current', 'queries', 'absolute'], @@ -193,14 +196,14 @@ CHARTS = { ] }, 'search_latency': { - 'options': [None, 'Query And Fetch Latency', 'ms', 'search performance', 'elastic.search_latency', 'stacked'], + 'options': [None, 'Query And Fetch Latency', 'milliseconds', 'search performance', 'elastic.search_latency', 'stacked'], 'lines': [ ['query_latency', 'query', 'absolute', 1, 1000], ['fetch_latency', 'fetch', 'absolute', 1, 1000] ] }, 'index_performance_total': { - 'options': [None, 'Indexed Documents, Index Refreshes, Index Flushes To Disk', 'number of', + 'options': [None, 'Indexed Documents, Index Refreshes, Index Flushes To Disk', 'events/s', 'indexing performance', 'elastic.index_performance_total', 'stacked'], 'lines': [ ['indices_indexing_index_total', 'indexed', 'incremental'], @@ -225,7 +228,7 @@ CHARTS = { ] }, 'index_latency': { - 'options': [None, 'Indexing And Flushing Latency', 'ms', 'indexing performance', + 'options': [None, 'Indexing And Flushing Latency', 'milliseconds', 'indexing performance', 'elastic.index_latency', 'stacked'], 'lines': [ ['indexing_latency', 'indexing', 'absolute', 1, 1000], @@ -233,7 +236,7 @@ CHARTS = { ] }, 'index_translog_operations': { - 'options': [None, 'Translog Operations', 'count', 'translog', + 'options': [None, 'Translog Operations', 'operations', 'translog', 'elastic.index_translog_operations', 'area'], 'lines': [ ['indices_translog_operations', 'total', 'absolute'], @@ -241,7 +244,7 @@ CHARTS = { ] }, 'index_translog_size': { - 'options': [None, 'Translog Size', 'MB', 'translog', + 'options': [None, 'Translog Size', 'MiB', 'translog', 'elastic.index_translog_size', 'area'], 'lines': [ ['indices_translog_size_in_bytes', 'total', 'absolute', 1, 1048567], @@ -249,21 +252,21 @@ CHARTS = { ] }, 'index_segments_count': { - 'options': [None, 'Total Number Of Indices Segments', 'count', 'indices segments', + 'options': [None, 'Total Number Of Indices Segments', 'segments', 'indices segments', 'elastic.index_segments_count', 'line'], 'lines': [ ['indices_segments_count', 'segments', 'absolute'] ] }, 'index_segments_memory_writer': { - 'options': [None, 'Index Writer Memory Usage', 'MB', 'indices segments', + 'options': [None, 'Index Writer Memory Usage', 'MiB', 'indices segments', 'elastic.index_segments_memory_writer', 'area'], 'lines': [ ['indices_segments_index_writer_memory_in_bytes', 'total', 'absolute', 1, 1048567] ] }, 'index_segments_memory': { - 'options': [None, 'Indices Segments Memory Usage', 'MB', 'indices segments', + 'options': [None, 'Indices Segments Memory Usage', 'MiB', 'indices segments', 'elastic.index_segments_memory', 'stacked'], 'lines': [ ['indices_segments_terms_memory_in_bytes', 'terms', 'absolute', 1, 1048567], @@ -277,14 +280,14 @@ CHARTS = { ] }, 'jvm_mem_heap': { - 'options': [None, 'JVM Heap Percentage Currently in Use', 'percent', 'memory usage and gc', + 'options': [None, 'JVM Heap Percentage Currently in Use', 'percentage', 'memory usage and gc', 'elastic.jvm_heap', 'area'], 'lines': [ ['jvm_mem_heap_used_percent', 'inuse', 'absolute'] ] }, 'jvm_mem_heap_bytes': { - 'options': [None, 'JVM Heap Commit And Usage', 'MB', 'memory usage and gc', + 'options': [None, 'JVM Heap Commit And Usage', 'MiB', 'memory usage and gc', 'elastic.jvm_heap_bytes', 'area'], 'lines': [ ['jvm_mem_heap_committed_in_bytes', 'commited', 'absolute', 1, 1048576], @@ -292,7 +295,7 @@ CHARTS = { ] }, 'jvm_buffer_pool_count': { - 'options': [None, 'JVM Buffers', 'count', 'memory usage and gc', + 'options': [None, 'JVM Buffers', 'pools', 'memory usage and gc', 'elastic.jvm_buffer_pool_count', 'line'], 'lines': [ ['jvm_buffer_pools_direct_count', 'direct', 'absolute'], @@ -300,7 +303,7 @@ CHARTS = { ] }, 'jvm_direct_buffers_memory': { - 'options': [None, 'JVM Direct Buffers Memory', 'MB', 'memory usage and gc', + 'options': [None, 'JVM Direct Buffers Memory', 'MiB', 'memory usage and gc', 'elastic.jvm_direct_buffers_memory', 'area'], 'lines': [ ['jvm_buffer_pools_direct_used_in_bytes', 'used', 'absolute', 1, 1048567], @@ -308,7 +311,7 @@ CHARTS = { ] }, 'jvm_mapped_buffers_memory': { - 'options': [None, 'JVM Mapped Buffers Memory', 'MB', 'memory usage and gc', + 'options': [None, 'JVM Mapped Buffers Memory', 'MiB', 'memory usage and gc', 'elastic.jvm_mapped_buffers_memory', 'area'], 'lines': [ ['jvm_buffer_pools_mapped_used_in_bytes', 'used', 'absolute', 1, 1048567], @@ -316,14 +319,14 @@ CHARTS = { ] }, 'jvm_gc_count': { - 'options': [None, 'Garbage Collections', 'counts', 'memory usage and gc', 'elastic.gc_count', 'stacked'], + 'options': [None, 'Garbage Collections', 'events/s', 'memory usage and gc', 'elastic.gc_count', 'stacked'], 'lines': [ ['jvm_gc_collectors_young_collection_count', 'young', 'incremental'], ['jvm_gc_collectors_old_collection_count', 'old', 'incremental'] ] }, 'jvm_gc_time': { - 'options': [None, 'Time Spent On Garbage Collections', 'ms', 'memory usage and gc', + 'options': [None, 'Time Spent On Garbage Collections', 'milliseconds', 'memory usage and gc', 'elastic.gc_time', 'stacked'], 'lines': [ ['jvm_gc_collectors_young_collection_time_in_millis', 'young', 'incremental'], @@ -353,13 +356,13 @@ CHARTS = { ] }, 'fielddata_cache': { - 'options': [None, 'Fielddata Cache', 'MB', 'fielddata cache', 'elastic.fielddata_cache', 'line'], + 'options': [None, 'Fielddata Cache', 'MiB', 'fielddata cache', 'elastic.fielddata_cache', 'line'], 'lines': [ ['indices_fielddata_memory_size_in_bytes', 'cache', 'absolute', 1, 1048576] ] }, 'fielddata_evictions_tripped': { - 'options': [None, 'Fielddata Evictions And Circuit Breaker Tripped Count', 'number of events', + 'options': [None, 'Fielddata Evictions And Circuit Breaker Tripped Count', 'events/s', 'fielddata cache', 'elastic.fielddata_evictions_tripped', 'line'], 'lines': [ ['indices_fielddata_evictions', 'evictions', 'incremental'], @@ -367,12 +370,24 @@ CHARTS = { ] }, 'cluster_health_nodes': { - 'options': [None, 'Nodes And Tasks Statistics', 'units', 'cluster health API', + 'options': [None, 'Nodes Statistics', 'nodes', 'cluster health API', 'elastic.cluster_health_nodes', 'stacked'], 'lines': [ ['number_of_nodes', 'nodes', 'absolute'], ['number_of_data_nodes', 'data_nodes', 'absolute'], + ] + }, + 'cluster_health_pending_tasks': { + 'options': [None, 'Tasks Statistics', 'tasks', 'cluster health API', + 'elastic.cluster_health_pending_tasks', 'line'], + 'lines': [ ['number_of_pending_tasks', 'pending_tasks', 'absolute'], + ] + }, + 'cluster_health_flight_fetch': { + 'options': [None, 'In Flight Fetches Statistics', 'fetches', 'cluster health API', + 'elastic.cluster_health_flight_fetch', 'line'], + 'lines': [ ['number_of_in_flight_fetch', 'in_flight_fetch', 'absolute'] ] }, @@ -420,24 +435,30 @@ CHARTS = { ] }, 'cluster_stats_docs': { - 'options': [None, 'Docs Statistics', 'count', 'cluster stats API', + 'options': [None, 'Docs Statistics', 'docs', 'cluster stats API', 'elastic.cluster_docs', 'line'], 'lines': [ ['indices_docs_count', 'docs', 'absolute'] ] }, 'cluster_stats_store': { - 'options': [None, 'Store Statistics', 'MB', 'cluster stats API', + 'options': [None, 'Store Statistics', 'MiB', 'cluster stats API', 'elastic.cluster_store', 'line'], 'lines': [ ['indices_store_size_in_bytes', 'size', 'absolute', 1, 1048567] ] }, - 'cluster_stats_indices_shards': { - 'options': [None, 'Indices And Shards Statistics', 'count', 'cluster stats API', - 'elastic.cluster_indices_shards', 'stacked'], + 'cluster_stats_indices': { + 'options': [None, 'Indices Statistics', 'indices', 'cluster stats API', + 'elastic.cluster_indices', 'line'], 'lines': [ ['indices_count', 'indices', 'absolute'], + ] + }, + 'cluster_stats_shards_total': { + 'options': [None, 'Total Shards Statistics', 'shards', 'cluster stats API', + 'elastic.cluster_shards_total', 'line'], + 'lines': [ ['indices_shards_total', 'shards', 'absolute'] ] }, @@ -450,7 +471,7 @@ CHARTS = { ] }, 'host_metrics_file_descriptors': { - 'options': [None, 'Available File Descriptors In Percent', 'percent', 'host metrics', + 'options': [None, 'Available File Descriptors In Percent', 'percentage', 'host metrics', 'elastic.host_descriptors', 'area'], 'lines': [ ['file_descriptors_used', 'used', 'absolute', 1, 10] @@ -473,9 +494,11 @@ class Service(UrlService): self.definitions = CHARTS self.host = self.configuration.get('host') self.port = self.configuration.get('port', 9200) - self.url = '{scheme}://{host}:{port}'.format(scheme=self.configuration.get('scheme', 'http'), - host=self.host, - port=self.port) + self.url = '{scheme}://{host}:{port}'.format( + scheme=self.configuration.get('scheme', 'http'), + host=self.host, + port=self.port, + ) self.latency = dict() self.methods = list() diff --git a/collectors/python.d.plugin/elasticsearch/elasticsearch.conf b/collectors/python.d.plugin/elasticsearch/elasticsearch.conf index 213843bf..e5c97e7e 100644 --- a/collectors/python.d.plugin/elasticsearch/elasticsearch.conf +++ b/collectors/python.d.plugin/elasticsearch/elasticsearch.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, elasticsearch plugin also supports the following: diff --git a/collectors/python.d.plugin/example/README.md b/collectors/python.d.plugin/example/README.md index f9f314ac..d65f8cf9 100644 --- a/collectors/python.d.plugin/example/README.md +++ b/collectors/python.d.plugin/example/README.md @@ -1 +1,5 @@ -An example python data collection module.
\ No newline at end of file +# example + +An example python data collection module. + +[]() diff --git a/collectors/python.d.plugin/example/example.chart.py b/collectors/python.d.plugin/example/example.chart.py index 85defa4d..cc8c1875 100644 --- a/collectors/python.d.plugin/example/example.chart.py +++ b/collectors/python.d.plugin/example/example.chart.py @@ -7,12 +7,13 @@ from random import SystemRandom from bases.FrameworkServices.SimpleService import SimpleService -# default module values -# update_every = 4 + priority = 90000 -retries = 60 -ORDER = ['random'] +ORDER = [ + 'random', +] + CHARTS = { 'random': { 'options': [None, 'A random number', 'random number', 'random', 'random', 'line'], diff --git a/collectors/python.d.plugin/example/example.conf b/collectors/python.d.plugin/example/example.conf index e7fed9b5..3d843517 100644 --- a/collectors/python.d.plugin/example/example.conf +++ b/collectors/python.d.plugin/example/example.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, example also supports the following: diff --git a/collectors/python.d.plugin/exim/README.md b/collectors/python.d.plugin/exim/README.md index b9a62cad..1cebb27f 100644 --- a/collectors/python.d.plugin/exim/README.md +++ b/collectors/python.d.plugin/exim/README.md @@ -11,3 +11,5 @@ It produces only one chart: Configuration is not needed. --- + +[]() diff --git a/collectors/python.d.plugin/exim/exim.chart.py b/collectors/python.d.plugin/exim/exim.chart.py index 5431dd46..68b7b5cf 100644 --- a/collectors/python.d.plugin/exim/exim.chart.py +++ b/collectors/python.d.plugin/exim/exim.chart.py @@ -5,13 +5,12 @@ from bases.FrameworkServices.ExecutableService import ExecutableService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['qemails'] +EXIM_COMMAND = 'exim -bpc' + +ORDER = [ + 'qemails', +] CHARTS = { 'qemails': { @@ -26,9 +25,9 @@ CHARTS = { class Service(ExecutableService): def __init__(self, configuration=None, name=None): ExecutableService.__init__(self, configuration=configuration, name=name) - self.command = 'exim -bpc' self.order = ORDER self.definitions = CHARTS + self.command = EXIM_COMMAND def _get_data(self): """ diff --git a/collectors/python.d.plugin/exim/exim.conf b/collectors/python.d.plugin/exim/exim.conf index 2add7b2c..3b7e6592 100644 --- a/collectors/python.d.plugin/exim/exim.conf +++ b/collectors/python.d.plugin/exim/exim.conf @@ -28,11 +28,9 @@ update_every: 10 # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -59,7 +57,7 @@ update_every: 10 # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, exim also supports the following: diff --git a/collectors/python.d.plugin/fail2ban/README.md b/collectors/python.d.plugin/fail2ban/README.md index 2ab02196..26511986 100644 --- a/collectors/python.d.plugin/fail2ban/README.md +++ b/collectors/python.d.plugin/fail2ban/README.md @@ -21,3 +21,5 @@ If no configuration is given, module will attempt to read log file at `/var/log/ If conf file is not found default jail is `ssh`. --- + +[]() diff --git a/collectors/python.d.plugin/fail2ban/fail2ban.chart.py b/collectors/python.d.plugin/fail2ban/fail2ban.chart.py index 95468900..dfd2feab 100644 --- a/collectors/python.d.plugin/fail2ban/fail2ban.chart.py +++ b/collectors/python.d.plugin/fail2ban/fail2ban.chart.py @@ -35,8 +35,19 @@ def charts(jails): }, } for jail in jails: - ch[ORDER[0]]['lines'].append([jail, jail, 'incremental']) - ch[ORDER[1]]['lines'].append(['{0}_in_jail'.format(jail), jail, 'absolute']) + dim = [ + jail, + jail, + 'incremental', + ] + ch[ORDER[0]]['lines'].append(dim) + + dim = [ + '{0}_in_jail'.format(jail), + jail, + 'absolute', + ] + ch[ORDER[1]]['lines'].append(dim) return ch @@ -46,7 +57,8 @@ RE_JAILS = re.compile(r'\[([a-zA-Z0-9_-]+)\][^\[\]]+?enabled\s+= (true|false)') # Example: # 2018-09-12 11:45:53,715 fail2ban.actions[25029]: WARNING [ssh] Unban 195.201.88.33 # 2018-09-12 11:45:58,727 fail2ban.actions[25029]: WARNING [ssh] Ban 217.59.246.27 -RE_DATA = re.compile(r'\[(?P<jail>[A-Za-z-_0-9]+)\] (?P<action>Unban|Ban) (?P<ip>[a-f0-9.:]+)') +# 2018-09-12 11:45:58,727 fail2ban.actions[25029]: WARNING [ssh] Restore Ban 217.59.246.27 +RE_DATA = re.compile(r'\[(?P<jail>[A-Za-z-_0-9]+)\] (?P<action>Unban|Ban|Restore Ban) (?P<ip>[a-f0-9.:]+)') DEFAULT_JAILS = [ 'ssh', @@ -58,12 +70,10 @@ class Service(LogService): LogService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = dict() - self.log_path = self.configuration.get('log_path', '/var/log/fail2ban.log') self.conf_path = self.configuration.get('conf_path', '/etc/fail2ban/jail.local') self.conf_dir = self.configuration.get('conf_dir', '/etc/fail2ban/jail.d/') self.exclude = self.configuration.get('exclude', str()) - self.monitoring_jails = list() self.banned_ips = defaultdict(set) self.data = dict() @@ -116,7 +126,7 @@ class Service(LogService): jail, action, ip = match['jail'], match['action'], match['ip'] - if action == 'Ban': + if action == 'Ban' or action == 'Restore Ban': self.data[jail] += 1 if ip not in self.banned_ips[jail]: self.banned_ips[jail].add(ip) @@ -126,7 +136,7 @@ class Service(LogService): self.banned_ips[jail].remove(ip) self.data['{0}_in_jail'.format(jail)] -= 1 - return self.data + return self.data def get_files_from_dir(self, dir_path, suffix): """ diff --git a/collectors/python.d.plugin/fail2ban/fail2ban.conf b/collectors/python.d.plugin/fail2ban/fail2ban.conf index 60ca8723..a36436b5 100644 --- a/collectors/python.d.plugin/fail2ban/fail2ban.conf +++ b/collectors/python.d.plugin/fail2ban/fail2ban.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, fail2ban also supports the following: diff --git a/collectors/python.d.plugin/freeradius/README.md b/collectors/python.d.plugin/freeradius/README.md index e5fe88ec..00eb50df 100644 --- a/collectors/python.d.plugin/freeradius/README.md +++ b/collectors/python.d.plugin/freeradius/README.md @@ -68,3 +68,5 @@ To do this, create a link from the sites-enabled directory to the status file in and restart/reload your FREERADIUS server. --- + +[]() diff --git a/collectors/python.d.plugin/freeradius/freeradius.chart.py b/collectors/python.d.plugin/freeradius/freeradius.chart.py index 3126831b..8563660c 100644 --- a/collectors/python.d.plugin/freeradius/freeradius.chart.py +++ b/collectors/python.d.plugin/freeradius/freeradius.chart.py @@ -3,25 +3,37 @@ # Author: l2isbad # SPDX-License-Identifier: GPL-3.0-or-later -from re import findall +import re from subprocess import Popen, PIPE from bases.collection import find_binary from bases.FrameworkServices.SimpleService import SimpleService -# default module values (can be overridden per job in `config`) -priority = 60000 -retries = 60 update_every = 15 +PARSER = re.compile(r'((?<=-)[AP][a-zA-Z-]+) = (\d+)') + RADIUS_MSG = 'Message-Authenticator = 0x00, FreeRADIUS-Statistics-Type = 15, Response-Packet-Type = Access-Accept' -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['authentication', 'accounting', 'proxy-auth', 'proxy-acct'] +RADCLIENT_RETRIES = 1 +RADCLIENT_TIMEOUT = 1 + +DEFAULT_HOST = 'localhost' +DEFAULT_PORT = 18121 +DEFAULT_DO_ACCT = False +DEFAULT_DO_PROXY_AUTH = False +DEFAULT_DO_PROXY_ACCT = False + +ORDER = [ + 'authentication', + 'accounting', + 'proxy-auth', + 'proxy-acct', +] CHARTS = { 'authentication': { - 'options': [None, 'Authentication', 'packets/s', 'Authentication', 'freerad.auth', 'line'], + 'options': [None, 'Authentication', 'packets/s', 'authentication', 'freerad.auth', 'line'], 'lines': [ ['access-accepts', None, 'incremental'], ['access-rejects', None, 'incremental'], @@ -33,7 +45,7 @@ CHARTS = { ] }, 'accounting': { - 'options': [None, 'Accounting', 'packets/s', 'Accounting', 'freerad.acct', 'line'], + 'options': [None, 'Accounting', 'packets/s', 'accounting', 'freerad.acct', 'line'], 'lines': [ ['accounting-requests', 'requests', 'incremental'], ['accounting-responses', 'responses', 'incremental'], @@ -45,7 +57,7 @@ CHARTS = { ] }, 'proxy-auth': { - 'options': [None, 'Proxy Authentication', 'packets/s', 'Authentication', 'freerad.proxy.auth', 'line'], + 'options': [None, 'Proxy Authentication', 'packets/s', 'authentication', 'freerad.proxy.auth', 'line'], 'lines': [ ['proxy-access-accepts', 'access-accepts', 'incremental'], ['proxy-access-rejects', 'access-rejects', 'incremental'], @@ -57,7 +69,7 @@ CHARTS = { ] }, 'proxy-acct': { - 'options': [None, 'Proxy Accounting', 'packets/s', 'Accounting', 'freerad.proxy.acct', 'line'], + 'options': [None, 'Proxy Accounting', 'packets/s', 'accounting', 'freerad.proxy.acct', 'line'], 'lines': [ ['proxy-accounting-requests', 'requests', 'incremental'], ['proxy-accounting-responses', 'responses', 'incremental'], @@ -71,46 +83,80 @@ CHARTS = { } +def radclient_status(radclient, retries, timeout, host, port, secret): + # radclient -r 1 -t 1 -x 127.0.0.1:18121 status secret + + return '{radclient} -r {num_retries} -t {timeout} -x {host}:{port} status {secret}'.format( + radclient=radclient, + num_retries=retries, + timeout=timeout, + host=host, + port=port, + secret=secret, + ).split() + + class Service(SimpleService): def __init__(self, configuration=None, name=None): SimpleService.__init__(self, configuration=configuration, name=name) + self.order = ORDER self.definitions = CHARTS - self.host = self.configuration.get('host', 'localhost') - self.port = self.configuration.get('port', '18121') + self.host = self.configuration.get('host', DEFAULT_HOST) + self.port = self.configuration.get('port', DEFAULT_PORT) self.secret = self.configuration.get('secret') - self.acct = self.configuration.get('acct', False) - self.proxy_auth = self.configuration.get('proxy_auth', False) - self.proxy_acct = self.configuration.get('proxy_acct', False) - chart_choice = [True, bool(self.acct), bool(self.proxy_auth), bool(self.proxy_acct)] - self.order = [chart for chart, choice in zip(ORDER, chart_choice) if choice] + self.do_acct = self.configuration.get('acct', DEFAULT_DO_ACCT) + self.do_proxy_auth = self.configuration.get('proxy_auth', DEFAULT_DO_PROXY_AUTH) + self.do_proxy_acct = self.configuration.get('proxy_acct', DEFAULT_DO_PROXY_ACCT) self.echo = find_binary('echo') self.radclient = find_binary('radclient') self.sub_echo = [self.echo, RADIUS_MSG] - self.sub_radclient = [self.radclient, '-r', '1', '-t', '1', '-x', - ':'.join([self.host, self.port]), 'status', self.secret] + self.sub_radclient = radclient_status( + self.radclient, RADCLIENT_RETRIES, RADCLIENT_TIMEOUT, self.host, self.port, self.secret, + ) def check(self): - if not all([self.echo, self.radclient]): - self.error('Can\'t locate "radclient" binary or binary is not executable by netdata') + if not self.radclient: + self.error("Can't locate 'radclient' binary or binary is not executable by netdata user") return False + + if not self.echo: + self.error("Can't locate 'echo' binary or binary is not executable by netdata user") + return None + if not self.secret: - self.error('"secret" not set') + self.error("'secret' isn't set") return None - if self._get_raw_data(): - return True - self.error('Request returned no data. Is server alive?') - return False + if not self.get_raw_data(): + self.error('Request returned no data. Is server alive?') + return False - def _get_data(self): + if not self.do_acct: + self.order.remove('accounting') + + if not self.do_proxy_auth: + self.order.remove('proxy-auth') + + if not self.do_proxy_acct: + self.order.remove('proxy-acct') + + return True + + def get_data(self): """ Format data received from shell command :return: dict """ - result = self._get_raw_data() - return dict([(elem[0].lower(), int(elem[1])) for elem in findall(r'((?<=-)[AP][a-zA-Z-]+) = (\d+)', result)]) + result = self.get_raw_data() - def _get_raw_data(self): + if not result: + return None + + return dict( + (key.lower(), value) for key, value in PARSER.findall(result) + ) + + def get_raw_data(self): """ The following code is equivalent to 'echo "Message-Authenticator = 0x00, FreeRADIUS-Statistics-Type = 15, Response-Packet-Type = Access-Accept" @@ -124,6 +170,8 @@ class Service(SimpleService): raw_result = process_rad.communicate()[0] except OSError: return None + if process_rad.returncode is 0: return raw_result.decode() + return None diff --git a/collectors/python.d.plugin/freeradius/freeradius.conf b/collectors/python.d.plugin/freeradius/freeradius.conf index 3336d4c4..74b27377 100644 --- a/collectors/python.d.plugin/freeradius/freeradius.conf +++ b/collectors/python.d.plugin/freeradius/freeradius.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, freeradius also supports the following: diff --git a/collectors/python.d.plugin/go_expvar/README.md b/collectors/python.d.plugin/go_expvar/README.md index e3356e1f..3942a7be 100644 --- a/collectors/python.d.plugin/go_expvar/README.md +++ b/collectors/python.d.plugin/go_expvar/README.md @@ -169,7 +169,6 @@ and its base `UrlService` class. These are: update_every: 1 # the job's data collection frequency priority: 60000 # the job's order on the dashboard - retries: 60 # the job's number of restoration attempts user: admin # use when the expvar endpoint is protected by HTTP Basic Auth password: sekret # use when the expvar endpoint is protected by HTTP Basic Auth @@ -274,3 +273,5 @@ The images below show how do the final charts in netdata look.  + +[]() diff --git a/collectors/python.d.plugin/go_expvar/go_expvar.chart.py b/collectors/python.d.plugin/go_expvar/go_expvar.chart.py index 76e8b72e..e82a8776 100644 --- a/collectors/python.d.plugin/go_expvar/go_expvar.chart.py +++ b/collectors/python.d.plugin/go_expvar/go_expvar.chart.py @@ -6,17 +6,24 @@ from __future__ import division import json +from collections import namedtuple + from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 +MEMSTATS_ORDER = [ + 'memstats_heap', + 'memstats_stack', + 'memstats_mspan', + 'memstats_mcache', + 'memstats_sys', + 'memstats_live_objects', + 'memstats_gc_pauses', +] MEMSTATS_CHARTS = { 'memstats_heap': { - 'options': ['heap', 'memory: size of heap memory structures', 'kB', 'memstats', + 'options': ['heap', 'memory: size of heap memory structures', 'KiB', 'memstats', 'expvar.memstats.heap', 'line'], 'lines': [ ['memstats_heap_alloc', 'alloc', 'absolute', 1, 1024], @@ -24,21 +31,21 @@ MEMSTATS_CHARTS = { ] }, 'memstats_stack': { - 'options': ['stack', 'memory: size of stack memory structures', 'kB', 'memstats', + 'options': ['stack', 'memory: size of stack memory structures', 'KiB', 'memstats', 'expvar.memstats.stack', 'line'], 'lines': [ ['memstats_stack_inuse', 'inuse', 'absolute', 1, 1024] ] }, 'memstats_mspan': { - 'options': ['mspan', 'memory: size of mspan memory structures', 'kB', 'memstats', + 'options': ['mspan', 'memory: size of mspan memory structures', 'KiB', 'memstats', 'expvar.memstats.mspan', 'line'], 'lines': [ ['memstats_mspan_inuse', 'inuse', 'absolute', 1, 1024] ] }, 'memstats_mcache': { - 'options': ['mcache', 'memory: size of mcache memory structures', 'kB', 'memstats', + 'options': ['mcache', 'memory: size of mcache memory structures', 'KiB', 'memstats', 'expvar.memstats.mcache', 'line'], 'lines': [ ['memstats_mcache_inuse', 'inuse', 'absolute', 1, 1024] @@ -52,7 +59,7 @@ MEMSTATS_CHARTS = { ] }, 'memstats_sys': { - 'options': ['sys', 'memory: size of reserved virtual address space', 'kB', 'memstats', + 'options': ['sys', 'memory: size of reserved virtual address space', 'KiB', 'memstats', 'expvar.memstats.sys', 'line'], 'lines': [ ['memstats_sys', 'sys', 'absolute', 1, 1024] @@ -67,8 +74,14 @@ MEMSTATS_CHARTS = { } } -MEMSTATS_ORDER = ['memstats_heap', 'memstats_stack', 'memstats_mspan', 'memstats_mcache', - 'memstats_sys', 'memstats_live_objects', 'memstats_gc_pauses'] +EXPVAR = namedtuple( + "EXPVAR", + [ + "key", + "type", + "id", + ] +) def flatten(d, top='', sep='.'): @@ -85,7 +98,6 @@ def flatten(d, top='', sep='.'): class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - # if memstats collection is enabled, add the charts and their order if self.configuration.get('collect_memstats'): self.definitions = dict(MEMSTATS_CHARTS) @@ -118,7 +130,7 @@ class Service(UrlService): def _parse_extra_charts_config(self, extra_charts_config): # a place to store the expvar keys and their types - self.expvars = dict() + self.expvars = list() for chart in extra_charts_config: @@ -156,11 +168,8 @@ class Service(UrlService): self.info('Unsupported expvar_type "{0}". Must be "int" or "float"'.format(ev_type)) continue - if ev_key in self.expvars: - self.info('Duplicate expvar key {0}: skipping line.'.format(ev_key)) - continue - - self.expvars[ev_key] = (ev_type, line_id) + # self.expvars[ev_key] = (ev_type, line_id) + self.expvars.append(EXPVAR(ev_key, ev_type, line_id)) chart_dict['lines'].append( [ @@ -197,21 +206,21 @@ class Service(UrlService): # the rest of the data, thus avoiding needless iterating over the multiply nested memstats dict. del (data['memstats']) flattened = flatten(data) - for k, v in flattened.items(): - ev = self.expvars.get(k) - if not ev: - # expvar is not defined in config, skip it + + for ev in self.expvars: + v = flattened.get(ev.key) + + if v is None: continue + try: - key_type, line_id = ev - if key_type == 'int': - expvars[line_id] = int(v) - elif key_type == 'float': - # if the value type is float, multiply it by 1000 and set line divisor to 1000 - expvars[line_id] = float(v) * 100 + if ev.type == 'int': + expvars[ev.id] = int(v) + elif ev.type == 'float': + expvars[ev.id] = float(v) * 100 except ValueError: - self.info('Failed to parse value for key {0} as {1}, ignoring key.'.format(k, key_type)) - del self.expvars[k] + self.info('Failed to parse value for key {0} as {1}, ignoring key.'.format(ev.key, ev.type)) + return None return expvars diff --git a/collectors/python.d.plugin/go_expvar/go_expvar.conf b/collectors/python.d.plugin/go_expvar/go_expvar.conf index af89158a..4b821cde 100644 --- a/collectors/python.d.plugin/go_expvar/go_expvar.conf +++ b/collectors/python.d.plugin/go_expvar/go_expvar.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -53,7 +51,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, this plugin also supports the following: diff --git a/collectors/python.d.plugin/haproxy/README.md b/collectors/python.d.plugin/haproxy/README.md index 4bff2567..4bd80a23 100644 --- a/collectors/python.d.plugin/haproxy/README.md +++ b/collectors/python.d.plugin/haproxy/README.md @@ -47,3 +47,5 @@ via_socket: If no configuration is given, module will fail to run. --- + +[]() diff --git a/collectors/python.d.plugin/haproxy/haproxy.chart.py b/collectors/python.d.plugin/haproxy/haproxy.chart.py index a46689f5..d97d28d2 100644 --- a/collectors/python.d.plugin/haproxy/haproxy.chart.py +++ b/collectors/python.d.plugin/haproxy/haproxy.chart.py @@ -14,12 +14,6 @@ except ImportError: from bases.FrameworkServices.SocketService import SocketService from bases.FrameworkServices.UrlService import UrlService - -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 - # charts order (can be overridden if you want less charts, or different order) ORDER = [ 'fbin', @@ -56,11 +50,11 @@ ORDER = [ CHARTS = { 'fbin': { - 'options': [None, 'Kilobytes In', 'KB/s', 'frontend', 'haproxy_f.bin', 'line'], + 'options': [None, 'Kilobytes In', 'KiB/s', 'frontend', 'haproxy_f.bin', 'line'], 'lines': [] }, 'fbout': { - 'options': [None, 'Kilobytes Out', 'KB/s', 'frontend', 'haproxy_f.bout', 'line'], + 'options': [None, 'Kilobytes Out', 'KiB/s', 'frontend', 'haproxy_f.bout', 'line'], 'lines': [] }, 'fscur': { @@ -101,11 +95,11 @@ CHARTS = { 'lines': [] }, 'bbin': { - 'options': [None, 'Kilobytes In', 'KB/s', 'backend', 'haproxy_b.bin', 'line'], + 'options': [None, 'Kilobytes In', 'KiB/s', 'backend', 'haproxy_b.bin', 'line'], 'lines': [] }, 'bbout': { - 'options': [None, 'Kilobytes Out', 'KB/s', 'backend', 'haproxy_b.bout', 'line'], + 'options': [None, 'Kilobytes Out', 'KiB/s', 'backend', 'haproxy_b.bout', 'line'], 'lines': [] }, 'bscur': { @@ -146,41 +140,39 @@ CHARTS = { 'lines': [] }, 'bqtime': { - 'options': [None, 'The average queue time over the 1024 last requests', 'ms', 'backend', + 'options': [None, 'The average queue time over the 1024 last requests', 'milliseconds', 'backend', 'haproxy_b.qtime', 'line'], 'lines': [] }, 'bctime': { - 'options': [None, 'The average connect time over the 1024 last requests', 'ms', 'backend', + 'options': [None, 'The average connect time over the 1024 last requests', 'milliseconds', 'backend', 'haproxy_b.ctime', 'line'], 'lines': [] }, 'brtime': { - 'options': [None, 'The average response time over the 1024 last requests', 'ms', 'backend', + 'options': [None, 'The average response time over the 1024 last requests', 'milliseconds', 'backend', 'haproxy_b.rtime', 'line'], 'lines': [] }, 'bttime': { - 'options': [None, 'The average total session time over the 1024 last requests', 'ms', 'backend', + 'options': [None, 'The average total session time over the 1024 last requests', 'milliseconds', 'backend', 'haproxy_b.ttime', 'line'], 'lines': [] }, 'health_sdown': { - 'options': [None, 'Backend Servers In DOWN State', 'failed servers', 'health', - 'haproxy_hs.down', 'line'], + 'options': [None, 'Backend Servers In DOWN State', 'failed servers', 'health', 'haproxy_hs.down', 'line'], 'lines': [] }, 'health_sup': { - 'options': [None, 'Backend Servers In UP State', 'health servers', 'health', - 'haproxy_hs.up', 'line'], + 'options': [None, 'Backend Servers In UP State', 'health servers', 'health', 'haproxy_hs.up', 'line'], 'lines': [] }, 'health_bdown': { - 'options': [None, 'Is Backend Alive? 1 = DOWN', 'failed backend', 'health', 'haproxy_hb.down', 'line'], + 'options': [None, 'Is Backend Failed?', 'boolean', 'health', 'haproxy_hb.down', 'line'], 'lines': [] }, 'health_idle': { - 'options': [None, 'The Ratio Of Polling Time Vs Total Time', 'percent', 'health', 'haproxy.idle', 'line'], + 'options': [None, 'The Ratio Of Polling Time Vs Total Time', 'percentage', 'health', 'haproxy.idle', 'line'], 'lines': [ ['idle', None, 'absolute'] ] @@ -214,6 +206,7 @@ REGEX = dict(url=re_compile(r'idle = (?P<idle>[0-9]+)'), socket=re_compile(r'Idle_pct: (?P<idle>[0-9]+)')) +# TODO: the code is unreadable class Service(UrlService, SocketService): def __init__(self, configuration=None, name=None): if 'socket' in configuration: diff --git a/collectors/python.d.plugin/haproxy/haproxy.conf b/collectors/python.d.plugin/haproxy/haproxy.conf index a40dd76a..10a0df3c 100644 --- a/collectors/python.d.plugin/haproxy/haproxy.conf +++ b/collectors/python.d.plugin/haproxy/haproxy.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, haproxy also supports the following: diff --git a/collectors/python.d.plugin/hddtemp/README.md b/collectors/python.d.plugin/hddtemp/README.md index 1236186a..d9f254d5 100644 --- a/collectors/python.d.plugin/hddtemp/README.md +++ b/collectors/python.d.plugin/hddtemp/README.md @@ -20,3 +20,5 @@ port: 7634 If no configuration is given, module will attempt to connect to hddtemp daemon on `127.0.0.1:7634` address --- + +[]() diff --git a/collectors/python.d.plugin/hddtemp/hddtemp.chart.py b/collectors/python.d.plugin/hddtemp/hddtemp.chart.py index dea70117..810aaacc 100644 --- a/collectors/python.d.plugin/hddtemp/hddtemp.chart.py +++ b/collectors/python.d.plugin/hddtemp/hddtemp.chart.py @@ -12,7 +12,9 @@ from copy import deepcopy from bases.FrameworkServices.SocketService import SocketService -ORDER = ['temperatures'] +ORDER = [ + 'temperatures', +] CHARTS = { 'temperatures': { @@ -39,11 +41,11 @@ class Service(SocketService): SocketService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = deepcopy(CHARTS) + self.do_only = self.configuration.get('devices') self._keep_alive = False self.request = "" self.host = "127.0.0.1" self.port = 7634 - self.do_only = self.configuration.get('devices') def get_disks(self): r = self._get_raw_data() @@ -89,8 +91,7 @@ class Service(SocketService): return False for d in disks: - n = d.id if d.id.startswith('sd') else d.name - dim = [d.id, n] + dim = [d.id] self.definitions['temperatures']['lines'].append(dim) return True diff --git a/collectors/python.d.plugin/hddtemp/hddtemp.conf b/collectors/python.d.plugin/hddtemp/hddtemp.conf index 9165798a..b2d7aef6 100644 --- a/collectors/python.d.plugin/hddtemp/hddtemp.conf +++ b/collectors/python.d.plugin/hddtemp/hddtemp.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, hddtemp also supports the following: diff --git a/collectors/python.d.plugin/httpcheck/README.md b/collectors/python.d.plugin/httpcheck/README.md index 75910766..4cd024d1 100644 --- a/collectors/python.d.plugin/httpcheck/README.md +++ b/collectors/python.d.plugin/httpcheck/README.md @@ -39,3 +39,5 @@ server: response time is low and should be used as reference only. --- + +[]() diff --git a/collectors/python.d.plugin/httpcheck/httpcheck.chart.py b/collectors/python.d.plugin/httpcheck/httpcheck.chart.py index f046f33c..fd51370d 100644 --- a/collectors/python.d.plugin/httpcheck/httpcheck.chart.py +++ b/collectors/python.d.plugin/httpcheck/httpcheck.chart.py @@ -16,7 +16,6 @@ from bases.FrameworkServices.UrlService import UrlService # default module values (can be overridden per job in `config`) update_every = 3 priority = 60000 -retries = 60 # Response HTTP_RESPONSE_TIME = 'time' @@ -29,11 +28,15 @@ HTTP_BAD_STATUS = 'bad_status' HTTP_TIMEOUT = 'timeout' HTTP_NO_CONNECTION = 'no_connection' -ORDER = ['response_time', 'response_length', 'status'] +ORDER = [ + 'response_time', + 'response_length', + 'status', +] CHARTS = { 'response_time': { - 'options': [None, 'HTTP response time', 'ms', 'response', 'httpcheck.responsetime', 'line'], + 'options': [None, 'HTTP response time', 'milliseconds', 'response', 'httpcheck.responsetime', 'line'], 'lines': [ [HTTP_RESPONSE_TIME, 'time', 'absolute', 100, 1000] ] @@ -60,12 +63,12 @@ CHARTS = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) + self.order = ORDER + self.definitions = CHARTS pattern = self.configuration.get('regex') self.regex = re.compile(pattern) if pattern else None self.status_codes_accepted = self.configuration.get('status_accepted', [200]) self.follow_redirect = self.configuration.get('redirect', True) - self.order = ORDER - self.definitions = CHARTS def _get_data(self): """ diff --git a/collectors/python.d.plugin/httpcheck/httpcheck.conf b/collectors/python.d.plugin/httpcheck/httpcheck.conf index bd21b5af..1e1dd020 100644 --- a/collectors/python.d.plugin/httpcheck/httpcheck.conf +++ b/collectors/python.d.plugin/httpcheck/httpcheck.conf @@ -27,6 +27,10 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes + # chart_cleanup sets the default chart cleanup interval in iterations. # A chart is marked as obsolete if it has not been updated # 'chart_cleanup' iterations in a row. @@ -61,7 +65,7 @@ chart_cleanup: 0 # # JOBs sharing a name are mutually exclusive # update_every: 3 # [optional] the JOB's data collection frequency # priority: 60000 # [optional] the JOB's order on the dashboard -# retries: 60 # [optional] the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # timeout: 1 # [optional] the timeout when connecting, supports decimals (e.g. 0.5s) # url: 'http[s]://host-ip-or-dns[:port][path]' # # [required] the remote host url to connect to. If [:port] is missing, it defaults to 80 diff --git a/collectors/python.d.plugin/icecast/README.md b/collectors/python.d.plugin/icecast/README.md index a28a6c39..068da6a0 100644 --- a/collectors/python.d.plugin/icecast/README.md +++ b/collectors/python.d.plugin/icecast/README.md @@ -24,3 +24,5 @@ remote: Without configuration, module attempts to connect to `http://localhost:8443/status-json.xsl` --- + +[]() diff --git a/collectors/python.d.plugin/icecast/icecast.chart.py b/collectors/python.d.plugin/icecast/icecast.chart.py index d8813f9b..40eaf89b 100644 --- a/collectors/python.d.plugin/icecast/icecast.chart.py +++ b/collectors/python.d.plugin/icecast/icecast.chart.py @@ -8,11 +8,9 @@ import json from bases.FrameworkServices.UrlService import UrlService -priority = 60000 -retries = 60 - -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['listeners'] +ORDER = [ + 'listeners', +] CHARTS = { 'listeners': { diff --git a/collectors/python.d.plugin/icecast/icecast.conf b/collectors/python.d.plugin/icecast/icecast.conf index a900d06d..a33074ae 100644 --- a/collectors/python.d.plugin/icecast/icecast.conf +++ b/collectors/python.d.plugin/icecast/icecast.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, icecast also supports the following: diff --git a/collectors/python.d.plugin/ipfs/README.md b/collectors/python.d.plugin/ipfs/README.md index a30649a5..a8392037 100644 --- a/collectors/python.d.plugin/ipfs/README.md +++ b/collectors/python.d.plugin/ipfs/README.md @@ -23,3 +23,5 @@ localhost: --- + +[]() diff --git a/collectors/python.d.plugin/ipfs/ipfs.chart.py b/collectors/python.d.plugin/ipfs/ipfs.chart.py index 3f6794e4..8c89b4be 100644 --- a/collectors/python.d.plugin/ipfs/ipfs.chart.py +++ b/collectors/python.d.plugin/ipfs/ipfs.chart.py @@ -7,25 +7,17 @@ import json from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 -# default job configuration (overridden by python.d.plugin) -# config = {'local': { -# 'update_every': update_every, -# 'retries': retries, -# 'priority': priority, -# 'url': 'http://localhost:5001' -# }} - -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['bandwidth', 'peers', 'repo_size', 'repo_objects'] +ORDER = [ + 'bandwidth', + 'peers', + 'repo_size', + 'repo_objects', +] CHARTS = { 'bandwidth': { - 'options': [None, 'IPFS Bandwidth', 'kbits/s', 'Bandwidth', 'ipfs.bandwidth', 'line'], + 'options': [None, 'IPFS Bandwidth', 'kilobits/s', 'Bandwidth', 'ipfs.bandwidth', 'line'], 'lines': [ ['in', None, 'absolute', 8, 1000], ['out', None, 'absolute', -8, 1000] @@ -38,10 +30,10 @@ CHARTS = { ] }, 'repo_size': { - 'options': [None, 'IPFS Repo Size', 'GB', 'Size', 'ipfs.repo_size', 'area'], + 'options': [None, 'IPFS Repo Size', 'GiB', 'Size', 'ipfs.repo_size', 'area'], 'lines': [ - ['avail', None, 'absolute', 1, 1e9], - ['size', None, 'absolute', 1, 1e9], + ['avail', None, 'absolute', 1, 1 << 30], + ['size', None, 'absolute', 1, 1 << 30], ] }, 'repo_objects': { @@ -69,11 +61,11 @@ SI_zeroes = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - self.baseurl = self.configuration.get('url', 'http://localhost:5001') self.order = ORDER self.definitions = CHARTS - self.__storage_max = None + self.baseurl = self.configuration.get('url', 'http://localhost:5001') self.do_pinapi = self.configuration.get('pinapi') + self.__storage_max = None def _get_json(self, sub_url): """ @@ -135,6 +127,6 @@ class Service(UrlService): for new_key, orig_key, xmute in cfg[suburl]: try: r[new_key] = xmute(in_json[orig_key]) - except Exception: - continue + except Exception as error: + self.debug(error) return r or None diff --git a/collectors/python.d.plugin/ipfs/ipfs.conf b/collectors/python.d.plugin/ipfs/ipfs.conf index e3df0f6b..c7e18648 100644 --- a/collectors/python.d.plugin/ipfs/ipfs.conf +++ b/collectors/python.d.plugin/ipfs/ipfs.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, ipfs also supports the following: diff --git a/collectors/python.d.plugin/isc_dhcpd/README.md b/collectors/python.d.plugin/isc_dhcpd/README.md index 334d86e3..67547e2f 100644 --- a/collectors/python.d.plugin/isc_dhcpd/README.md +++ b/collectors/python.d.plugin/isc_dhcpd/README.md @@ -32,3 +32,5 @@ In case of python2 you need to install `py2-ipaddress` to make plugin work. The module will not work If no configuration is given. --- + +[]() diff --git a/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.chart.py b/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.chart.py index a9f27494..bbe7a936 100644 --- a/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.chart.py +++ b/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.chart.py @@ -19,14 +19,16 @@ from copy import deepcopy from bases.FrameworkServices.SimpleService import SimpleService -priority = 60000 -retries = 60 -ORDER = ['pools_utilization', 'pools_active_leases', 'leases_total'] +ORDER = [ + 'pools_utilization', + 'pools_active_leases', + 'leases_total', +] CHARTS = { 'pools_utilization': { - 'options': [None, 'Pools Utilization', '%', 'utilization', 'isc_dhcpd.utilization', 'line'], + 'options': [None, 'Pools Utilization', 'percentage', 'utilization', 'isc_dhcpd.utilization', 'line'], 'lines': [] }, 'pools_active_leases': { @@ -120,7 +122,6 @@ class Service(SimpleService): SimpleService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = deepcopy(CHARTS) - lease_path = self.configuration.get('leases_path', '/var/lib/dhcp/dhcpd.leases') self.dhcpd_leases = DhcpdLeasesFile(path=lease_path) self.pools = list() @@ -131,7 +132,7 @@ class Service(SimpleService): def check(self): if not HAVE_IP_ADDRESS: - self.error("'python-ipaddress' module is needed") + self.error("'python-ipaddress' package is needed") return False if not self.dhcpd_leases.is_valid(): @@ -190,6 +191,17 @@ class Service(SimpleService): def create_charts(self): for pool in self.pools: - self.definitions['pools_utilization']['lines'].append([pool.id + '_utilization', pool.name, - 'absolute', 1, 100]) - self.definitions['pools_active_leases']['lines'].append([pool.id + '_active_leases', pool.name]) + dim = [ + pool.id + '_utilization', + pool.name, + 'absolute', + 1, + 100, + ] + self.definitions['pools_utilization']['lines'].append(dim) + + dim = [ + pool.id + '_active_leases', + pool.name, + ] + self.definitions['pools_active_leases']['lines'].append(dim) diff --git a/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.conf b/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.conf index 4a4c4a5e..8dcb5082 100644 --- a/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.conf +++ b/collectors/python.d.plugin/isc_dhcpd/isc_dhcpd.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, isc_dhcpd supports the following: diff --git a/collectors/python.d.plugin/linux_power_supply/README.md b/collectors/python.d.plugin/linux_power_supply/README.md index 5cfbe41c..f5b05d19 100644 --- a/collectors/python.d.plugin/linux_power_supply/README.md +++ b/collectors/python.d.plugin/linux_power_supply/README.md @@ -1,4 +1,9 @@ -# linux\_power\_supply +# Linux power supply + +> THIS MODULE IS OBSOLETE. +> USE THE [PROC PLUGIN](../../proc.plugin) - IT IS MORE EFFICIENT + +--- This module monitors variosu metrics reported by power supply drivers on Linux. This allows tracking and alerting on things like remaining @@ -65,3 +70,5 @@ the corresponding `min` or `empty`, which will then always read as zero. This way, alerts which match on these will still work. --- + +[]() diff --git a/collectors/python.d.plugin/linux_power_supply/linux_power_supply.conf b/collectors/python.d.plugin/linux_power_supply/linux_power_supply.conf index 3cb610f7..96eeef44 100644 --- a/collectors/python.d.plugin/linux_power_supply/linux_power_supply.conf +++ b/collectors/python.d.plugin/linux_power_supply/linux_power_supply.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_everye -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # In addition to the above parameters, linux_power_supply also supports diff --git a/collectors/python.d.plugin/litespeed/README.md b/collectors/python.d.plugin/litespeed/README.md index d1482f33..88b67253 100644 --- a/collectors/python.d.plugin/litespeed/README.md +++ b/collectors/python.d.plugin/litespeed/README.md @@ -45,3 +45,5 @@ local: If no configuration is given, module will use "/tmp/lshttpd/". --- + +[]() diff --git a/collectors/python.d.plugin/litespeed/litespeed.chart.py b/collectors/python.d.plugin/litespeed/litespeed.chart.py index efdc6869..9da94213 100644 --- a/collectors/python.d.plugin/litespeed/litespeed.chart.py +++ b/collectors/python.d.plugin/litespeed/litespeed.chart.py @@ -16,11 +16,15 @@ update_every = 10 # charts order (can be overridden if you want less charts, or different order) ORDER = [ - 'net_throughput_http', 'net_throughput_https', # net throughput - 'connections_http', 'connections_https', # connections - 'requests', 'requests_processing', # requests - 'pub_cache_hits', 'private_cache_hits', # cache - 'static_hits' # static + 'net_throughput_http', # net throughput + 'net_throughput_https', # net throughput + 'connections_http', # connections + 'connections_https', # connections + 'requests', # requests + 'requests_processing', # requests + 'pub_cache_hits', # cache + 'private_cache_hits', # cache + 'static_hits', # static ] CHARTS = { diff --git a/collectors/python.d.plugin/litespeed/litespeed.conf b/collectors/python.d.plugin/litespeed/litespeed.conf index 17d0f690..a326e184 100644 --- a/collectors/python.d.plugin/litespeed/litespeed.conf +++ b/collectors/python.d.plugin/litespeed/litespeed.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, lightspeed also supports the following: diff --git a/collectors/python.d.plugin/logind/README.md b/collectors/python.d.plugin/logind/README.md index 8f8670d4..c35630c8 100644 --- a/collectors/python.d.plugin/logind/README.md +++ b/collectors/python.d.plugin/logind/README.md @@ -52,3 +52,5 @@ is currently disabled by default, and needs to be explicitly enabled in `/etc/netdata/python.d.conf` before it will run. --- + +[]() diff --git a/collectors/python.d.plugin/logind/logind.chart.py b/collectors/python.d.plugin/logind/logind.chart.py index bfc486c7..70866864 100644 --- a/collectors/python.d.plugin/logind/logind.chart.py +++ b/collectors/python.d.plugin/logind/logind.chart.py @@ -8,7 +8,13 @@ from bases.FrameworkServices.ExecutableService import ExecutableService priority = 59999 disabled_by_default = True -ORDER = ['sessions', 'users', 'seats'] +LOGINCTL_COMMAND = 'loginctl list-sessions --no-legend' + +ORDER = [ + 'sessions', + 'users', + 'seats', +] CHARTS = { 'sessions': { @@ -39,9 +45,9 @@ CHARTS = { class Service(ExecutableService): def __init__(self, configuration=None, name=None): ExecutableService.__init__(self, configuration=configuration, name=name) - self.command = 'loginctl list-sessions --no-legend' self.order = ORDER self.definitions = CHARTS + self.command = LOGINCTL_COMMAND def _get_data(self): ret = { diff --git a/collectors/python.d.plugin/logind/logind.conf b/collectors/python.d.plugin/logind/logind.conf index 0623493d..01a859d2 100644 --- a/collectors/python.d.plugin/logind/logind.conf +++ b/collectors/python.d.plugin/logind/logind.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,5 +56,5 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds diff --git a/collectors/python.d.plugin/mdstat/README.md b/collectors/python.d.plugin/mdstat/README.md index 1ff8f7da..f88346ee 100644 --- a/collectors/python.d.plugin/mdstat/README.md +++ b/collectors/python.d.plugin/mdstat/README.md @@ -1,5 +1,10 @@ # mdstat +> THIS MODULE IS OBSOLETE. +> USE THE [PROC PLUGIN](../../proc.plugin) - IT IS MORE EFFICIENT + +--- + Module monitor /proc/mdstat It produces: @@ -24,3 +29,5 @@ It produces: No configuration is needed. --- + +[]() diff --git a/collectors/python.d.plugin/mdstat/mdstat.conf b/collectors/python.d.plugin/mdstat/mdstat.conf index 66a2f153..c72b6383 100644 --- a/collectors/python.d.plugin/mdstat/mdstat.conf +++ b/collectors/python.d.plugin/mdstat/mdstat.conf @@ -19,11 +19,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. diff --git a/collectors/python.d.plugin/megacli/README.md b/collectors/python.d.plugin/megacli/README.md index d288a635..e96015dd 100644 --- a/collectors/python.d.plugin/megacli/README.md +++ b/collectors/python.d.plugin/megacli/README.md @@ -46,3 +46,5 @@ do_battery: yes ``` --- + +[]() diff --git a/collectors/python.d.plugin/megacli/megacli.chart.py b/collectors/python.d.plugin/megacli/megacli.chart.py index 41a1079f..e1a05e41 100644 --- a/collectors/python.d.plugin/megacli/megacli.chart.py +++ b/collectors/python.d.plugin/megacli/megacli.chart.py @@ -66,7 +66,7 @@ def battery_charts(bats): charts.update( { 'bbu_{0}_relative_charge'.format(b.id): { - 'options': [None, 'Relative State of Charge', '%', 'battery', + 'options': [None, 'Relative State of Charge', 'percentage', 'battery', 'megacli.bbu_relative_charge', 'line'], 'lines': [ ['bbu_{0}_relative_charge'.format(b.id), 'adapter {0}'.format(b.id)], @@ -180,8 +180,8 @@ class Service(ExecutableService): ExecutableService.__init__(self, configuration=configuration, name=name) self.order = list() self.definitions = dict() - self.megacli = Megacli() self.do_battery = self.configuration.get('do_battery') + self.megacli = Megacli() def check_sudo(self): err = self._get_raw_data(command=self.megacli.sudo_check, stderr=True) diff --git a/collectors/python.d.plugin/megacli/megacli.conf b/collectors/python.d.plugin/megacli/megacli.conf index 73afb2f7..1af4292d 100644 --- a/collectors/python.d.plugin/megacli/megacli.conf +++ b/collectors/python.d.plugin/megacli/megacli.conf @@ -19,11 +19,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -50,7 +48,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, megacli also supports the following: diff --git a/collectors/python.d.plugin/memcached/README.md b/collectors/python.d.plugin/memcached/README.md index 3521c109..98627c4a 100644 --- a/collectors/python.d.plugin/memcached/README.md +++ b/collectors/python.d.plugin/memcached/README.md @@ -67,3 +67,5 @@ localtcpip: If no configuration is given, module will attempt to connect to memcached instance on `127.0.0.1:11211` address. --- + +[]() diff --git a/collectors/python.d.plugin/memcached/memcached.chart.py b/collectors/python.d.plugin/memcached/memcached.chart.py index 3c310ec6..9803dbb0 100644 --- a/collectors/python.d.plugin/memcached/memcached.chart.py +++ b/collectors/python.d.plugin/memcached/memcached.chart.py @@ -5,37 +5,37 @@ from bases.FrameworkServices.SocketService import SocketService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 - -# default job configuration (overridden by python.d.plugin) -# config = {'local': { -# 'update_every': update_every, -# 'retries': retries, -# 'priority': priority, -# 'host': 'localhost', -# 'port': 11211, -# 'unix_socket': None -# }} - -ORDER = ['cache', 'net', 'connections', 'items', 'evicted_reclaimed', - 'get', 'get_rate', 'set_rate', 'cas', 'delete', 'increment', 'decrement', 'touch', 'touch_rate'] + +ORDER = [ + 'cache', + 'net', + 'connections', + 'items', + 'evicted_reclaimed', + 'get', + 'get_rate', + 'set_rate', + 'cas', + 'delete', + 'increment', + 'decrement', + 'touch', + 'touch_rate', +] CHARTS = { 'cache': { - 'options': [None, 'Cache Size', 'megabytes', 'cache', 'memcached.cache', 'stacked'], + 'options': [None, 'Cache Size', 'MiB', 'cache', 'memcached.cache', 'stacked'], 'lines': [ - ['avail', 'available', 'absolute', 1, 1048576], - ['used', 'used', 'absolute', 1, 1048576] + ['avail', 'available', 'absolute', 1, 1 << 20], + ['used', 'used', 'absolute', 1, 1 << 20] ] }, 'net': { 'options': [None, 'Network', 'kilobits/s', 'network', 'memcached.net', 'area'], 'lines': [ - ['bytes_read', 'in', 'incremental', 8, 1024], - ['bytes_written', 'out', 'incremental', -8, 1024] + ['bytes_read', 'in', 'incremental', 8, 1000], + ['bytes_written', 'out', 'incremental', -8, 1000], ] }, 'connections': { @@ -127,13 +127,13 @@ CHARTS = { class Service(SocketService): def __init__(self, configuration=None, name=None): SocketService.__init__(self, configuration=configuration, name=name) + self.order = ORDER + self.definitions = CHARTS self.request = 'stats\r\n' self.host = 'localhost' self.port = 11211 self._keep_alive = True self.unix_socket = None - self.order = ORDER - self.definitions = CHARTS def _get_data(self): """ diff --git a/collectors/python.d.plugin/memcached/memcached.conf b/collectors/python.d.plugin/memcached/memcached.conf index 85c3daf6..3286b462 100644 --- a/collectors/python.d.plugin/memcached/memcached.conf +++ b/collectors/python.d.plugin/memcached/memcached.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, memcached also supports the following: diff --git a/collectors/python.d.plugin/mongodb/README.md b/collectors/python.d.plugin/mongodb/README.md index 8e5f652c..ac8930dd 100644 --- a/collectors/python.d.plugin/mongodb/README.md +++ b/collectors/python.d.plugin/mongodb/README.md @@ -121,6 +121,33 @@ Number of charts depends on mongodb version, storage engine and other features ( 26. **Replication set member heartbeat latency** * member (time when last heartbeat was received from replica set member) +### prerequisite +Create a read-only user for the netdata in the admin database. + +1. Authenticate as the admin user. + +``` +use admin +db.auth("admin", "<MONGODB_ADMIN_PASSWORD>") +``` + +2. Create a user. + +``` +# MongoDB 2.x. +db.addUser("netdata", "<UNIQUE_PASSWORD>", true) + +# MongoDB 3.x or higher. +db.createUser({ + "user":"netdata", + "pwd": "<UNIQUE_PASSWORD>", + "roles" : [ + {role: 'read', db: 'admin' }, + {role: 'clusterMonitor', db: 'admin'}, + {role: 'read', db: 'local' } + ] +}) +``` ### configuration @@ -139,3 +166,5 @@ local: If no configuration is given, module will attempt to connect to mongodb daemon on `127.0.0.1:27017` address --- + +[]() diff --git a/collectors/python.d.plugin/mongodb/mongodb.chart.py b/collectors/python.d.plugin/mongodb/mongodb.chart.py index 10344342..92740ff8 100644 --- a/collectors/python.d.plugin/mongodb/mongodb.chart.py +++ b/collectors/python.d.plugin/mongodb/mongodb.chart.py @@ -16,10 +16,6 @@ except ImportError: from bases.FrameworkServices.SimpleService import SimpleService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 REPL_SET_STATES = [ ('1', 'primary'), @@ -209,21 +205,21 @@ CHARTS = { ] }, 'journaling_volume': { - 'options': [None, 'Volume of data written to the journal', 'MB', 'database performance', + 'options': [None, 'Volume of data written to the journal', 'MiB', 'database performance', 'mongodb.journaling_volume', 'line'], 'lines': [ ['journaledMB', 'volume', 'absolute', 1, 100] ] }, 'background_flush_average': { - 'options': [None, 'Average time taken by flushes to execute', 'ms', 'database performance', + 'options': [None, 'Average time taken by flushes to execute', 'milliseconds', 'database performance', 'mongodb.background_flush_average', 'line'], 'lines': [ ['average_ms', 'time', 'absolute', 1, 100] ] }, 'background_flush_last': { - 'options': [None, 'Time taken by the last flush operation to execute', 'ms', 'database performance', + 'options': [None, 'Time taken by the last flush operation to execute', 'milliseconds', 'database performance', 'mongodb.background_flush_last', 'line'], 'lines': [ ['last_ms', 'time', 'absolute', 1, 100] @@ -269,7 +265,7 @@ CHARTS = { ] }, 'memory': { - 'options': [None, 'Memory metrics', 'MB', 'resource utilization', 'mongodb.memory', 'stacked'], + 'options': [None, 'Memory metrics', 'MiB', 'resource utilization', 'mongodb.memory', 'stacked'], 'lines': [ ['virtual', None, 'absolute', 1, 1], ['resident', None, 'absolute', 1, 1], @@ -313,7 +309,7 @@ CHARTS = { }, 'wiredtiger_cache': { 'options': [None, 'The percentage of the wiredTiger cache that is in use and cache with dirty bytes', - 'percent', 'resource utilization', 'mongodb.wiredtiger_cache', 'stacked'], + 'percentage', 'resource utilization', 'mongodb.wiredtiger_cache', 'stacked'], 'lines': [ ['wiredTiger_percent_clean', 'inuse', 'absolute', 1, 1000], ['wiredTiger_percent_dirty', 'dirty', 'absolute', 1, 1000] @@ -333,14 +329,14 @@ CHARTS = { 'lines': [] }, 'tcmalloc_generic': { - 'options': [None, 'Tcmalloc generic metrics', 'MB', 'tcmalloc', 'mongodb.tcmalloc_generic', 'stacked'], + 'options': [None, 'Tcmalloc generic metrics', 'MiB', 'tcmalloc', 'mongodb.tcmalloc_generic', 'stacked'], 'lines': [ - ['current_allocated_bytes', 'allocated', 'absolute', 1, 1048576], - ['heap_size', 'heap_size', 'absolute', 1, 1048576] + ['current_allocated_bytes', 'allocated', 'absolute', 1, 1 << 20], + ['heap_size', 'heap_size', 'absolute', 1, 1 << 20] ] }, 'tcmalloc_metrics': { - 'options': [None, 'Tcmalloc metrics', 'KB', 'tcmalloc', 'mongodb.tcmalloc_metrics', 'stacked'], + 'options': [None, 'Tcmalloc metrics', 'KiB', 'tcmalloc', 'mongodb.tcmalloc_metrics', 'stacked'], 'lines': [ ['central_cache_free_bytes', 'central_cache_free', 'absolute', 1, 1024], ['current_total_thread_cache_bytes', 'current_total_thread_cache', 'absolute', 1, 1024], diff --git a/collectors/python.d.plugin/mongodb/mongodb.conf b/collectors/python.d.plugin/mongodb/mongodb.conf index 62faef68..f69acac7 100644 --- a/collectors/python.d.plugin/mongodb/mongodb.conf +++ b/collectors/python.d.plugin/mongodb/mongodb.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, mongodb also supports the following: diff --git a/collectors/python.d.plugin/monit/README.md b/collectors/python.d.plugin/monit/README.md index 6d10240c..0f69aff2 100644 --- a/collectors/python.d.plugin/monit/README.md +++ b/collectors/python.d.plugin/monit/README.md @@ -31,3 +31,5 @@ local: If no configuration is given, module will attempt to connect to monit as `http://localhost:2812`. --- + +[]() diff --git a/collectors/python.d.plugin/monit/monit.chart.py b/collectors/python.d.plugin/monit/monit.chart.py index 51943c0e..3ac0032c 100644 --- a/collectors/python.d.plugin/monit/monit.chart.py +++ b/collectors/python.d.plugin/monit/monit.chart.py @@ -6,13 +6,20 @@ import xml.etree.ElementTree as ET from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 # see enum State_Type from monit.h (https://bitbucket.org/tildeslash/monit/src/master/src/monit.h) -MONIT_SERVICE_NAMES = ['Filesystem', 'Directory', 'File', 'Process', 'Host', 'System', 'Fifo', 'Program', 'Net'] +MONIT_SERVICE_NAMES = [ + 'Filesystem', + 'Directory', + 'File', + 'Process', + 'Host', + 'System', + 'Fifo', + 'Program', + 'Net', +] + DEFAULT_SERVICES_IDS = [0, 1, 2, 3, 4, 6, 7, 8] # charts order (can be overridden if you want less charts, or different order) @@ -90,10 +97,10 @@ CHARTS = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - base_url = self.configuration.get('url', 'http://localhost:2812') - self.url = '{0}/_status?format=xml&level=full'.format(base_url) self.order = ORDER self.definitions = CHARTS + base_url = self.configuration.get('url', 'http://localhost:2812') + self.url = '{0}/_status?format=xml&level=full'.format(base_url) def parse(self, data): try: @@ -105,15 +112,19 @@ class Service(UrlService): def check(self): self._manager = self._build_manager() + raw_data = self._get_raw_data() if not raw_data: return None + return bool(self.parse(raw_data)) def _get_data(self): raw_data = self._get_raw_data() + if not raw_data: return None + xml = self.parse(raw_data) if not xml: return None @@ -121,6 +132,7 @@ class Service(UrlService): data = {} for service_id in DEFAULT_SERVICES_IDS: service_category = MONIT_SERVICE_NAMES[service_id].lower() + if service_category == 'system': self.debug("Skipping service from 'System' category, because it's useless in graphs") continue diff --git a/collectors/python.d.plugin/monit/monit.conf b/collectors/python.d.plugin/monit/monit.conf index f9c26dbc..9a3fb693 100644 --- a/collectors/python.d.plugin/monit/monit.conf +++ b/collectors/python.d.plugin/monit/monit.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, this plugin also supports the following: diff --git a/collectors/python.d.plugin/mysql/README.md b/collectors/python.d.plugin/mysql/README.md index e38098e7..498493a3 100644 --- a/collectors/python.d.plugin/mysql/README.md +++ b/collectors/python.d.plugin/mysql/README.md @@ -65,7 +65,6 @@ Here is an example for 3 servers: ```yaml update_every : 10 priority : 90100 -retries : 5 local: 'my.cnf' : '/etc/mysql/my.cnf' @@ -82,9 +81,10 @@ remote: pass : 'bla' host : 'example.org' port : 9000 - retries : 20 ``` If no configuration is given, module will attempt to connect to mysql server via unix socket at `/var/run/mysqld/mysqld.sock` without password and with username `root` --- + +[]() diff --git a/collectors/python.d.plugin/mysql/mysql.chart.py b/collectors/python.d.plugin/mysql/mysql.chart.py index c4d1e8b3..20d32f81 100644 --- a/collectors/python.d.plugin/mysql/mysql.chart.py +++ b/collectors/python.d.plugin/mysql/mysql.chart.py @@ -6,10 +6,6 @@ from bases.FrameworkServices.MySQLService import MySQLService -# default module values (can be overridden per job in `config`) -# update_every = 3 -priority = 60000 -retries = 60 # query executed on MySQL server QUERY_GLOBAL = 'SHOW GLOBAL STATUS;' @@ -172,16 +168,19 @@ ORDER = [ 'binlog_cache', 'binlog_stmt_cache', 'threads', + 'threads_creation_rate', 'thread_cache_misses', 'innodb_io', 'innodb_io_ops', 'innodb_io_pending_ops', 'innodb_log', 'innodb_os_log', + 'innodb_os_log_fsync_writes', 'innodb_os_log_io', 'innodb_cur_row_lock', 'innodb_rows', 'innodb_buffer_pool_pages', + 'innodb_buffer_pool_flush_pages_requests', 'innodb_buffer_pool_bytes', 'innodb_buffer_pool_read_ahead', 'innodb_buffer_pool_reqs', @@ -206,14 +205,14 @@ ORDER = [ CHARTS = { 'net': { - 'options': [None, 'mysql Bandwidth', 'kilobits/s', 'bandwidth', 'mysql.net', 'area'], + 'options': [None, 'Bandwidth', 'kilobits/s', 'bandwidth', 'mysql.net', 'area'], 'lines': [ - ['Bytes_received', 'in', 'incremental', 8, 1024], - ['Bytes_sent', 'out', 'incremental', -8, 1024] + ['Bytes_received', 'in', 'incremental', 8, 1000], + ['Bytes_sent', 'out', 'incremental', -8, 1000] ] }, 'queries': { - 'options': [None, 'mysql Queries', 'queries/s', 'queries', 'mysql.queries', 'line'], + 'options': [None, 'Queries', 'queries/s', 'queries', 'mysql.queries', 'line'], 'lines': [ ['Queries', 'queries', 'incremental'], ['Questions', 'questions', 'incremental'], @@ -221,7 +220,7 @@ CHARTS = { ] }, 'queries_type': { - 'options': [None, 'mysql Query type', 'queries/s', 'query_types', 'mysql.queries_type', 'stacked'], + 'options': [None, 'Query Type', 'queries/s', 'query_types', 'mysql.queries_type', 'stacked'], 'lines': [ ['Com_select', 'select', 'incremental'], ['Com_delete', 'delete', 'incremental'], @@ -232,7 +231,7 @@ CHARTS = { ] }, 'handlers': { - 'options': [None, 'mysql Handlers', 'handlers/s', 'handlers', 'mysql.handlers', 'line'], + 'options': [None, 'Handlers', 'handlers/s', 'handlers', 'mysql.handlers', 'line'], 'lines': [ ['Handler_commit', 'commit', 'incremental'], ['Handler_delete', 'delete', 'incremental'], @@ -251,14 +250,14 @@ CHARTS = { ] }, 'table_locks': { - 'options': [None, 'mysql Tables Locks', 'locks/s', 'locks', 'mysql.table_locks', 'line'], + 'options': [None, 'Tables Locks', 'locks/s', 'locks', 'mysql.table_locks', 'line'], 'lines': [ ['Table_locks_immediate', 'immediate', 'incremental'], ['Table_locks_waited', 'waited', 'incremental', -1, 1] ] }, 'join_issues': { - 'options': [None, 'mysql Select Join Issues', 'joins/s', 'issues', 'mysql.join_issues', 'line'], + 'options': [None, 'Select Join Issues', 'joins/s', 'issues', 'mysql.join_issues', 'line'], 'lines': [ ['Select_full_join', 'full_join', 'incremental'], ['Select_full_range_join', 'full_range_join', 'incremental'], @@ -268,7 +267,7 @@ CHARTS = { ] }, 'sort_issues': { - 'options': [None, 'mysql Sort Issues', 'issues/s', 'issues', 'mysql.sort_issues', 'line'], + 'options': [None, 'Sort Issues', 'issues/s', 'issues', 'mysql.sort_issues', 'line'], 'lines': [ ['Sort_merge_passes', 'merge_passes', 'incremental'], ['Sort_range', 'range', 'incremental'], @@ -276,7 +275,7 @@ CHARTS = { ] }, 'tmp': { - 'options': [None, 'mysql Tmp Operations', 'counter', 'temporaries', 'mysql.tmp', 'line'], + 'options': [None, 'Tmp Operations', 'counter', 'temporaries', 'mysql.tmp', 'line'], 'lines': [ ['Created_tmp_disk_tables', 'disk_tables', 'incremental'], ['Created_tmp_files', 'files', 'incremental'], @@ -284,14 +283,14 @@ CHARTS = { ] }, 'connections': { - 'options': [None, 'mysql Connections', 'connections/s', 'connections', 'mysql.connections', 'line'], + 'options': [None, 'Connections', 'connections/s', 'connections', 'mysql.connections', 'line'], 'lines': [ ['Connections', 'all', 'incremental'], ['Aborted_connects', 'aborted', 'incremental'] ] }, 'connections_active': { - 'options': [None, 'mysql Connections Active', 'connections', 'connections', 'mysql.connections_active', 'line'], + 'options': [None, 'Connections Active', 'connections', 'connections', 'mysql.connections_active', 'line'], 'lines': [ ['Threads_connected', 'active', 'absolute'], ['max_connections', 'limit', 'absolute'], @@ -299,21 +298,26 @@ CHARTS = { ] }, 'binlog_cache': { - 'options': [None, 'mysql Binlog Cache', 'transactions/s', 'binlog', 'mysql.binlog_cache', 'line'], + 'options': [None, 'Binlog Cache', 'transactions/s', 'binlog', 'mysql.binlog_cache', 'line'], 'lines': [ ['Binlog_cache_disk_use', 'disk', 'incremental'], ['Binlog_cache_use', 'all', 'incremental'] ] }, 'threads': { - 'options': [None, 'mysql Threads', 'threads', 'threads', 'mysql.threads', 'line'], + 'options': [None, 'Threads', 'threads', 'threads', 'mysql.threads', 'line'], 'lines': [ ['Threads_connected', 'connected', 'absolute'], - ['Threads_created', 'created', 'incremental'], ['Threads_cached', 'cached', 'absolute', -1, 1], ['Threads_running', 'running', 'absolute'], ] }, + 'threads_creation_rate': { + 'options': [None, 'Threads Creation Rate', 'threads', 'threads/s', 'mysql.threads', 'line'], + 'lines': [ + ['Threads_created', 'created', 'incremental'], + ] + }, 'thread_cache_misses': { 'options': [None, 'mysql Threads Cache Misses', 'misses', 'threads', 'mysql.thread_cache_misses', 'area'], 'lines': [ @@ -321,14 +325,14 @@ CHARTS = { ] }, 'innodb_io': { - 'options': [None, 'mysql InnoDB I/O Bandwidth', 'kilobytes/s', 'innodb', 'mysql.innodb_io', 'area'], + 'options': [None, 'InnoDB I/O Bandwidth', 'KiB/s', 'innodb', 'mysql.innodb_io', 'area'], 'lines': [ ['Innodb_data_read', 'read', 'incremental', 1, 1024], ['Innodb_data_written', 'write', 'incremental', -1, 1024] ] }, 'innodb_io_ops': { - 'options': [None, 'mysql InnoDB I/O Operations', 'operations/s', 'innodb', 'mysql.innodb_io_ops', 'line'], + 'options': [None, 'InnoDB I/O Operations', 'operations/s', 'innodb', 'mysql.innodb_io_ops', 'line'], 'lines': [ ['Innodb_data_reads', 'reads', 'incremental'], ['Innodb_data_writes', 'writes', 'incremental', -1, 1], @@ -336,7 +340,7 @@ CHARTS = { ] }, 'innodb_io_pending_ops': { - 'options': [None, 'mysql InnoDB Pending I/O Operations', 'operations', 'innodb', + 'options': [None, 'InnoDB Pending I/O Operations', 'operations', 'innodb', 'mysql.innodb_io_pending_ops', 'line'], 'lines': [ ['Innodb_data_pending_reads', 'reads', 'absolute'], @@ -345,7 +349,7 @@ CHARTS = { ] }, 'innodb_log': { - 'options': [None, 'mysql InnoDB Log Operations', 'operations/s', 'innodb', 'mysql.innodb_log', 'line'], + 'options': [None, 'InnoDB Log Operations', 'operations/s', 'innodb', 'mysql.innodb_log', 'line'], 'lines': [ ['Innodb_log_waits', 'waits', 'incremental'], ['Innodb_log_write_requests', 'write_requests', 'incremental', -1, 1], @@ -353,28 +357,33 @@ CHARTS = { ] }, 'innodb_os_log': { - 'options': [None, 'mysql InnoDB OS Log Operations', 'operations', 'innodb', 'mysql.innodb_os_log', 'line'], + 'options': [None, 'InnoDB OS Log Pending Operations', 'operations', 'innodb', 'mysql.innodb_os_log', 'line'], + 'lines': [ + ['Innodb_os_log_pending_fsyncs', 'fsyncs', 'absolute'], + ['Innodb_os_log_pending_writes', 'writes', 'absolute', -1, 1], + ] + }, + 'innodb_os_log_fsync_writes': { + 'options': [None, 'InnoDB OS Log Operations', 'operations/s', 'innodb', 'mysql.innodb_os_log', 'line'], 'lines': [ ['Innodb_os_log_fsyncs', 'fsyncs', 'incremental'], - ['Innodb_os_log_pending_fsyncs', 'pending_fsyncs', 'absolute'], - ['Innodb_os_log_pending_writes', 'pending_writes', 'absolute', -1, 1], ] }, 'innodb_os_log_io': { - 'options': [None, 'mysql InnoDB OS Log Bandwidth', 'kilobytes/s', 'innodb', 'mysql.innodb_os_log_io', 'area'], + 'options': [None, 'InnoDB OS Log Bandwidth', 'KiB/s', 'innodb', 'mysql.innodb_os_log_io', 'area'], 'lines': [ ['Innodb_os_log_written', 'write', 'incremental', -1, 1024], ] }, 'innodb_cur_row_lock': { - 'options': [None, 'mysql InnoDB Current Row Locks', 'operations', 'innodb', + 'options': [None, 'InnoDB Current Row Locks', 'operations', 'innodb', 'mysql.innodb_cur_row_lock', 'area'], 'lines': [ ['Innodb_row_lock_current_waits', 'current_waits', 'absolute'] ] }, 'innodb_rows': { - 'options': [None, 'mysql InnoDB Row Operations', 'operations/s', 'innodb', 'mysql.innodb_rows', 'area'], + 'options': [None, 'InnoDB Row Operations', 'operations/s', 'innodb', 'mysql.innodb_rows', 'area'], 'lines': [ ['Innodb_rows_inserted', 'inserted', 'incremental'], ['Innodb_rows_read', 'read', 'incremental', 1, 1], @@ -383,19 +392,25 @@ CHARTS = { ] }, 'innodb_buffer_pool_pages': { - 'options': [None, 'mysql InnoDB Buffer Pool Pages', 'pages', 'innodb', + 'options': [None, 'InnoDB Buffer Pool Pages', 'pages', 'innodb', 'mysql.innodb_buffer_pool_pages', 'line'], 'lines': [ ['Innodb_buffer_pool_pages_data', 'data', 'absolute'], ['Innodb_buffer_pool_pages_dirty', 'dirty', 'absolute', -1, 1], ['Innodb_buffer_pool_pages_free', 'free', 'absolute'], - ['Innodb_buffer_pool_pages_flushed', 'flushed', 'incremental', -1, 1], ['Innodb_buffer_pool_pages_misc', 'misc', 'absolute', -1, 1], ['Innodb_buffer_pool_pages_total', 'total', 'absolute'] ] }, + 'innodb_buffer_pool_flush_pages_requests': { + 'options': [None, 'InnoDB Buffer Pool Flush Pages Requests', 'requests/s', 'innodb', + 'mysql.innodb_buffer_pool_pages', 'line'], + 'lines': [ + ['Innodb_buffer_pool_pages_flushed', 'flush pages', 'incremental'], + ] + }, 'innodb_buffer_pool_bytes': { - 'options': [None, 'mysql InnoDB Buffer Pool Bytes', 'MB', 'innodb', 'mysql.innodb_buffer_pool_bytes', 'area'], + 'options': [None, 'InnoDB Buffer Pool Bytes', 'MiB', 'innodb', 'mysql.innodb_buffer_pool_bytes', 'area'], 'lines': [ ['Innodb_buffer_pool_bytes_data', 'data', 'absolute', 1, 1024 * 1024], ['Innodb_buffer_pool_bytes_dirty', 'dirty', 'absolute', -1, 1024 * 1024] @@ -411,7 +426,7 @@ CHARTS = { ] }, 'innodb_buffer_pool_reqs': { - 'options': [None, 'mysql InnoDB Buffer Pool Requests', 'requests/s', 'innodb', + 'options': [None, 'InnoDB Buffer Pool Requests', 'requests/s', 'innodb', 'mysql.innodb_buffer_pool_reqs', 'area'], 'lines': [ ['Innodb_buffer_pool_read_requests', 'reads', 'incremental'], @@ -419,7 +434,7 @@ CHARTS = { ] }, 'innodb_buffer_pool_ops': { - 'options': [None, 'mysql InnoDB Buffer Pool Operations', 'operations/s', 'innodb', + 'options': [None, 'InnoDB Buffer Pool Operations', 'operations/s', 'innodb', 'mysql.innodb_buffer_pool_ops', 'area'], 'lines': [ ['Innodb_buffer_pool_reads', 'disk reads', 'incremental'], @@ -427,7 +442,7 @@ CHARTS = { ] }, 'qcache_ops': { - 'options': [None, 'mysql QCache Operations', 'queries/s', 'qcache', 'mysql.qcache_ops', 'line'], + 'options': [None, 'QCache Operations', 'queries/s', 'qcache', 'mysql.qcache_ops', 'line'], 'lines': [ ['Qcache_hits', 'hits', 'incremental'], ['Qcache_lowmem_prunes', 'lowmem prunes', 'incremental', -1, 1], @@ -436,26 +451,26 @@ CHARTS = { ] }, 'qcache': { - 'options': [None, 'mysql QCache Queries in Cache', 'queries', 'qcache', 'mysql.qcache', 'line'], + 'options': [None, 'QCache Queries in Cache', 'queries', 'qcache', 'mysql.qcache', 'line'], 'lines': [ ['Qcache_queries_in_cache', 'queries', 'absolute'] ] }, 'qcache_freemem': { - 'options': [None, 'mysql QCache Free Memory', 'MB', 'qcache', 'mysql.qcache_freemem', 'area'], + 'options': [None, 'QCache Free Memory', 'MiB', 'qcache', 'mysql.qcache_freemem', 'area'], 'lines': [ ['Qcache_free_memory', 'free', 'absolute', 1, 1024 * 1024] ] }, 'qcache_memblocks': { - 'options': [None, 'mysql QCache Memory Blocks', 'blocks', 'qcache', 'mysql.qcache_memblocks', 'line'], + 'options': [None, 'QCache Memory Blocks', 'blocks', 'qcache', 'mysql.qcache_memblocks', 'line'], 'lines': [ ['Qcache_free_blocks', 'free', 'absolute'], ['Qcache_total_blocks', 'total', 'absolute'] ] }, 'key_blocks': { - 'options': [None, 'mysql MyISAM Key Cache Blocks', 'blocks', 'myisam', 'mysql.key_blocks', 'line'], + 'options': [None, 'MyISAM Key Cache Blocks', 'blocks', 'myisam', 'mysql.key_blocks', 'line'], 'lines': [ ['Key_blocks_unused', 'unused', 'absolute'], ['Key_blocks_used', 'used', 'absolute', -1, 1], @@ -463,14 +478,14 @@ CHARTS = { ] }, 'key_requests': { - 'options': [None, 'mysql MyISAM Key Cache Requests', 'requests/s', 'myisam', 'mysql.key_requests', 'area'], + 'options': [None, 'MyISAM Key Cache Requests', 'requests/s', 'myisam', 'mysql.key_requests', 'area'], 'lines': [ ['Key_read_requests', 'reads', 'incremental'], ['Key_write_requests', 'writes', 'incremental', -1, 1] ] }, 'key_disk_ops': { - 'options': [None, 'mysql MyISAM Key Cache Disk Operations', 'operations/s', + 'options': [None, 'MyISAM Key Cache Disk Operations', 'operations/s', 'myisam', 'mysql.key_disk_ops', 'area'], 'lines': [ ['Key_reads', 'reads', 'incremental'], @@ -478,19 +493,19 @@ CHARTS = { ] }, 'files': { - 'options': [None, 'mysql Open Files', 'files', 'files', 'mysql.files', 'line'], + 'options': [None, 'Open Files', 'files', 'files', 'mysql.files', 'line'], 'lines': [ ['Open_files', 'files', 'absolute'] ] }, 'files_rate': { - 'options': [None, 'mysql Opened Files Rate', 'files/s', 'files', 'mysql.files_rate', 'line'], + 'options': [None, 'Opened Files Rate', 'files/s', 'files', 'mysql.files_rate', 'line'], 'lines': [ ['Opened_files', 'files', 'incremental'] ] }, 'binlog_stmt_cache': { - 'options': [None, 'mysql Binlog Statement Cache', 'statements/s', 'binlog', + 'options': [None, 'Binlog Statement Cache', 'statements/s', 'binlog', 'mysql.binlog_stmt_cache', 'line'], 'lines': [ ['Binlog_stmt_cache_disk_use', 'disk', 'incremental'], @@ -498,7 +513,7 @@ CHARTS = { ] }, 'connection_errors': { - 'options': [None, 'mysql Connection Errors', 'connections/s', 'connections', + 'options': [None, 'Connection Errors', 'connections/s', 'connections', 'mysql.connection_errors', 'line'], 'lines': [ ['Connection_errors_accept', 'accept', 'incremental'], @@ -523,35 +538,35 @@ CHARTS = { ] }, 'galera_writesets': { - 'options': [None, 'Replicated writesets', 'writesets/s', 'galera', 'mysql.galera_writesets', 'line'], + 'options': [None, 'Replicated Writesets', 'writesets/s', 'galera', 'mysql.galera_writesets', 'line'], 'lines': [ ['wsrep_received', 'rx', 'incremental'], ['wsrep_replicated', 'tx', 'incremental', -1, 1], ] }, 'galera_bytes': { - 'options': [None, 'Replicated bytes', 'KB/s', 'galera', 'mysql.galera_bytes', 'area'], + 'options': [None, 'Replicated Bytes', 'KiB/s', 'galera', 'mysql.galera_bytes', 'area'], 'lines': [ ['wsrep_received_bytes', 'rx', 'incremental', 1, 1024], ['wsrep_replicated_bytes', 'tx', 'incremental', -1, 1024], ] }, 'galera_queue': { - 'options': [None, 'Galera queue', 'writesets', 'galera', 'mysql.galera_queue', 'line'], + 'options': [None, 'Galera Queue', 'writesets', 'galera', 'mysql.galera_queue', 'line'], 'lines': [ ['wsrep_local_recv_queue', 'rx', 'absolute'], ['wsrep_local_send_queue', 'tx', 'absolute', -1, 1], ] }, 'galera_conflicts': { - 'options': [None, 'Replication conflicts', 'transactions', 'galera', 'mysql.galera_conflicts', 'area'], + 'options': [None, 'Replication Conflicts', 'transactions', 'galera', 'mysql.galera_conflicts', 'area'], 'lines': [ ['wsrep_local_bf_aborts', 'bf_aborts', 'incremental'], ['wsrep_local_cert_failures', 'cert_fails', 'incremental', -1, 1], ] }, 'galera_flow_control': { - 'options': [None, 'Flow control', 'millisec', 'galera', 'mysql.galera_flow_control', 'area'], + 'options': [None, 'Flow Control', 'millisec', 'galera', 'mysql.galera_flow_control', 'area'], 'lines': [ ['wsrep_flow_control_paused_ns', 'paused', 'incremental', 1, 1000000], ] @@ -564,7 +579,11 @@ class Service(MySQLService): MySQLService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = CHARTS - self.queries = dict(global_status=QUERY_GLOBAL, slave_status=QUERY_SLAVE, variables=QUERY_VARIABLES) + self.queries = dict( + global_status=QUERY_GLOBAL, + slave_status=QUERY_SLAVE, + variables=QUERY_VARIABLES, + ) def _get_data(self): diff --git a/collectors/python.d.plugin/mysql/mysql.conf b/collectors/python.d.plugin/mysql/mysql.conf index b5956a2c..ac9b505b 100644 --- a/collectors/python.d.plugin/mysql/mysql.conf +++ b/collectors/python.d.plugin/mysql/mysql.conf @@ -27,11 +27,10 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes + # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +57,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, mysql also supports the following: diff --git a/collectors/python.d.plugin/nginx/README.md b/collectors/python.d.plugin/nginx/README.md index 007f45c7..7854105b 100644 --- a/collectors/python.d.plugin/nginx/README.md +++ b/collectors/python.d.plugin/nginx/README.md @@ -37,9 +37,10 @@ priority : 90100 local: url : 'http://localhost/stub_status' - retries : 10 ``` Without configuration, module attempts to connect to `http://localhost/stub_status` --- + +[]() diff --git a/collectors/python.d.plugin/nginx/nginx.chart.py b/collectors/python.d.plugin/nginx/nginx.chart.py index 09c6bbd3..84a5985e 100644 --- a/collectors/python.d.plugin/nginx/nginx.chart.py +++ b/collectors/python.d.plugin/nginx/nginx.chart.py @@ -5,38 +5,30 @@ from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 -# default job configuration (overridden by python.d.plugin) -# config = {'local': { -# 'update_every': update_every, -# 'retries': retries, -# 'priority': priority, -# 'url': 'http://localhost/stub_status' -# }} - -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['connections', 'requests', 'connection_status', 'connect_rate'] +ORDER = [ + 'connections', + 'requests', + 'connection_status', + 'connect_rate', +] CHARTS = { 'connections': { - 'options': [None, 'nginx Active Connections', 'connections', 'active connections', + 'options': [None, 'Active Connections', 'connections', 'active connections', 'nginx.connections', 'line'], 'lines': [ ['active'] ] }, 'requests': { - 'options': [None, 'nginx Requests', 'requests/s', 'requests', 'nginx.requests', 'line'], + 'options': [None, 'Requests', 'requests/s', 'requests', 'nginx.requests', 'line'], 'lines': [ ['requests', None, 'incremental'] ] }, 'connection_status': { - 'options': [None, 'nginx Active Connections by Status', 'connections', 'status', + 'options': [None, 'Active Connections by Status', 'connections', 'status', 'nginx.connection_status', 'line'], 'lines': [ ['reading'], @@ -45,7 +37,7 @@ CHARTS = { ] }, 'connect_rate': { - 'options': [None, 'nginx Connections Rate', 'connections/s', 'connections rate', + 'options': [None, 'Connections Rate', 'connections/s', 'connections rate', 'nginx.connect_rate', 'line'], 'lines': [ ['accepts', 'accepted', 'incremental'], @@ -58,9 +50,9 @@ CHARTS = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - self.url = self.configuration.get('url', 'http://localhost/stub_status') self.order = ORDER self.definitions = CHARTS + self.url = self.configuration.get('url', 'http://localhost/stub_status') def _get_data(self): """ diff --git a/collectors/python.d.plugin/nginx/nginx.conf b/collectors/python.d.plugin/nginx/nginx.conf index 71c52106..4001b4bb 100644 --- a/collectors/python.d.plugin/nginx/nginx.conf +++ b/collectors/python.d.plugin/nginx/nginx.conf @@ -39,11 +39,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -70,7 +68,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, this plugin also supports the following: diff --git a/collectors/python.d.plugin/nginx_plus/README.md b/collectors/python.d.plugin/nginx_plus/README.md index 43ec867a..c20ce30a 100644 --- a/collectors/python.d.plugin/nginx_plus/README.md +++ b/collectors/python.d.plugin/nginx_plus/README.md @@ -123,3 +123,5 @@ local: Without configuration, module fail to start. --- + +[]() diff --git a/collectors/python.d.plugin/nginx_plus/nginx_plus.chart.py b/collectors/python.d.plugin/nginx_plus/nginx_plus.chart.py index 1392f5a5..3082fdbe 100644 --- a/collectors/python.d.plugin/nginx_plus/nginx_plus.chart.py +++ b/collectors/python.d.plugin/nginx_plus/nginx_plus.chart.py @@ -16,12 +16,7 @@ except ImportError: from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -update_every = 1 -priority = 60000 -retries = 60 -# charts order (can be overridden if you want less charts, or different order) ORDER = [ 'requests_total', 'requests_current', @@ -76,7 +71,7 @@ CHARTS = { ] }, 'ssl_memory_usage': { - 'options': [None, 'Memory Usage', '%', 'ssl', 'nginx_plus.ssl_memory_usage', 'area'], + 'options': [None, 'Memory Usage', 'percentage', 'ssl', 'nginx_plus.ssl_memory_usage', 'area'], 'lines': [ ['ssl_memory_usage', 'usage', 'absolute', 1, 100] ] @@ -95,7 +90,7 @@ def cache_charts(cache): charts = OrderedDict() charts['{0}_traffic'.format(cache.name)] = { - 'options': [None, 'Traffic', 'KB', family, 'nginx_plus.cache_traffic', 'stacked'], + 'options': [None, 'Traffic', 'KiB', family, 'nginx_plus.cache_traffic', 'stacked'], 'lines': [ ['_'.join([cache.name, 'hit_bytes']), 'served', 'absolute', 1, 1024], ['_'.join([cache.name, 'miss_bytes_written']), 'written', 'absolute', 1, 1024], @@ -103,7 +98,7 @@ def cache_charts(cache): ] } charts['{0}_memory_usage'.format(cache.name)] = { - 'options': [None, 'Memory Usage', '%', family, 'nginx_plus.cache_memory_usage', 'area'], + 'options': [None, 'Memory Usage', 'percentage', family, 'nginx_plus.cache_memory_usage', 'area'], 'lines': [ ['_'.join([cache.name, 'memory_usage']), 'usage', 'absolute', 1, 100], ] @@ -200,7 +195,8 @@ def web_upstream_charts(wu): 'lines': dimensions('active') } charts['web_upstream_{name}_connections_usage'.format(name=wu.name)] = { - 'options': [None, 'Peers Connections Usage', '%', family, 'nginx_plus.web_upstream_connections_usage', 'line'], + 'options': [None, 'Peers Connections Usage', 'percentage', family, + 'nginx_plus.web_upstream_connections_usage', 'line'], 'lines': dimensions('connections_usage', d=100) } # Traffic @@ -223,7 +219,7 @@ def web_upstream_charts(wu): # Response Time for peer in wu: charts['web_upstream_{0}_{1}_timings'.format(wu.name, peer.server)] = { - 'options': [None, 'Peer "{0}" Timings'.format(peer.real_server), 'ms', family, + 'options': [None, 'Peer "{0}" Timings'.format(peer.real_server), 'milliseconds', family, 'nginx_plus.web_upstream_peer_timings', 'line'], 'lines': [ ['_'.join([wu.name, peer.server, 'header_time']), 'header'], @@ -232,7 +228,7 @@ def web_upstream_charts(wu): } # Memory Usage charts['web_upstream_{name}_memory_usage'.format(name=wu.name)] = { - 'options': [None, 'Memory Usage', '%', family, 'nginx_plus.web_upstream_memory_usage', 'area'], + 'options': [None, 'Memory Usage', 'percentage', family, 'nginx_plus.web_upstream_memory_usage', 'area'], 'lines': [ ['_'.join([wu.name, 'memory_usage']), 'usage', 'absolute', 1, 100] ] diff --git a/collectors/python.d.plugin/nginx_plus/nginx_plus.conf b/collectors/python.d.plugin/nginx_plus/nginx_plus.conf index 7b5c8f43..201eb0eb 100644 --- a/collectors/python.d.plugin/nginx_plus/nginx_plus.conf +++ b/collectors/python.d.plugin/nginx_plus/nginx_plus.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, nginx_plus also supports the following: diff --git a/collectors/python.d.plugin/nsd/README.md b/collectors/python.d.plugin/nsd/README.md index 02c302f4..b118657d 100644 --- a/collectors/python.d.plugin/nsd/README.md +++ b/collectors/python.d.plugin/nsd/README.md @@ -52,3 +52,5 @@ It produces: Configuration is not needed. --- + +[]() diff --git a/collectors/python.d.plugin/nsd/nsd.chart.py b/collectors/python.d.plugin/nsd/nsd.chart.py index d713f46b..77b0d7bb 100644 --- a/collectors/python.d.plugin/nsd/nsd.chart.py +++ b/collectors/python.d.plugin/nsd/nsd.chart.py @@ -7,13 +7,20 @@ import re from bases.FrameworkServices.ExecutableService import ExecutableService -# default module values (can be overridden per job in `config`) -priority = 60000 -retries = 5 + update_every = 30 -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['queries', 'zones', 'protocol', 'type', 'transfer', 'rcode'] +NSD_CONTROL_COMMAND = 'nsd-control stats_noreset' +REGEX = re.compile(r'([A-Za-z0-9.]+)=(\d+)') + +ORDER = [ + 'queries', + 'zones', + 'protocol', + 'type', + 'transfer', + 'rcode', +] CHARTS = { 'queries': { @@ -79,22 +86,21 @@ CHARTS = { class Service(ExecutableService): def __init__(self, configuration=None, name=None): - ExecutableService.__init__( - self, configuration=configuration, name=name) - self.command = 'nsd-control stats_noreset' + ExecutableService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = CHARTS - self.regex = re.compile(r'([A-Za-z0-9.]+)=(\d+)') + self.command = NSD_CONTROL_COMMAND def _get_data(self): lines = self._get_raw_data() if not lines: return None - r = self.regex - stats = dict((k.replace('.', '_'), int(v)) - for k, v in r.findall(''.join(lines))) + stats = dict( + (k.replace('.', '_'), int(v)) for k, v in REGEX.findall(''.join(lines)) + ) stats.setdefault('num_opcode_NOTIFY', 0) stats.setdefault('num_type_TYPE252', 0) stats.setdefault('num_type_TYPE255', 0) + return stats diff --git a/collectors/python.d.plugin/nsd/nsd.conf b/collectors/python.d.plugin/nsd/nsd.conf index 078e9721..77a8a317 100644 --- a/collectors/python.d.plugin/nsd/nsd.conf +++ b/collectors/python.d.plugin/nsd/nsd.conf @@ -28,11 +28,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -59,7 +57,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, nsd also supports the following: diff --git a/collectors/python.d.plugin/ntpd/README.md b/collectors/python.d.plugin/ntpd/README.md index b0fa17fd..d33fd877 100644 --- a/collectors/python.d.plugin/ntpd/README.md +++ b/collectors/python.d.plugin/ntpd/README.md @@ -69,3 +69,5 @@ otherhost: If no configuration is given, module will attempt to connect to `ntpd` on `::1:123` or `127.0.0.1:123` and show charts for the systemvars. Use `show_peers: yes` to also show the charts for configured peers. Local peers in the range `127.0.0.0/8` are hidden by default, use `peer_filter: ''` to show all peers. --- + +[]() diff --git a/collectors/python.d.plugin/ntpd/ntpd.chart.py b/collectors/python.d.plugin/ntpd/ntpd.chart.py index 79d557c8..5a5477e6 100644 --- a/collectors/python.d.plugin/ntpd/ntpd.chart.py +++ b/collectors/python.d.plugin/ntpd/ntpd.chart.py @@ -9,10 +9,6 @@ import re from bases.FrameworkServices.SocketService import SocketService -# default module values -update_every = 1 -priority = 60000 -retries = 60 # NTP Control Message Protocol constants MODE = 6 @@ -54,13 +50,15 @@ ORDER = [ CHARTS = { 'sys_offset': { - 'options': [None, 'Combined offset of server relative to this host', 'ms', 'system', 'ntpd.sys_offset', 'area'], + 'options': [None, 'Combined offset of server relative to this host', 'milliseconds', + 'system', 'ntpd.sys_offset', 'area'], 'lines': [ ['offset', 'offset', 'absolute', 1, PRECISION] ] }, 'sys_jitter': { - 'options': [None, 'Combined system jitter and clock jitter', 'ms', 'system', 'ntpd.sys_jitter', 'line'], + 'options': [None, 'Combined system jitter and clock jitter', 'milliseconds', + 'system', 'ntpd.sys_jitter', 'line'], 'lines': [ ['sys_jitter', 'system', 'absolute', 1, PRECISION], ['clk_jitter', 'clock', 'absolute', 1, PRECISION] @@ -79,14 +77,14 @@ CHARTS = { ] }, 'sys_rootdelay': { - 'options': [None, 'Total roundtrip delay to the primary reference clock', 'ms', 'system', + 'options': [None, 'Total roundtrip delay to the primary reference clock', 'milliseconds', 'system', 'ntpd.sys_rootdelay', 'area'], 'lines': [ ['rootdelay', 'delay', 'absolute', 1, PRECISION] ] }, 'sys_rootdisp': { - 'options': [None, 'Total root dispersion to the primary reference clock', 'ms', 'system', + 'options': [None, 'Total root dispersion to the primary reference clock', 'milliseconds', 'system', 'ntpd.sys_rootdisp', 'area'], 'lines': [ ['rootdisp', 'dispersion', 'absolute', 1, PRECISION] @@ -115,27 +113,27 @@ CHARTS = { PEER_CHARTS = { 'peer_offset': { - 'options': [None, 'Filter offset', 'ms', 'peers', 'ntpd.peer_offset', 'line'], + 'options': [None, 'Filter offset', 'milliseconds', 'peers', 'ntpd.peer_offset', 'line'], 'lines': [] }, 'peer_delay': { - 'options': [None, 'Filter delay', 'ms', 'peers', 'ntpd.peer_delay', 'line'], + 'options': [None, 'Filter delay', 'milliseconds', 'peers', 'ntpd.peer_delay', 'line'], 'lines': [] }, 'peer_dispersion': { - 'options': [None, 'Filter dispersion', 'ms', 'peers', 'ntpd.peer_dispersion', 'line'], + 'options': [None, 'Filter dispersion', 'milliseconds', 'peers', 'ntpd.peer_dispersion', 'line'], 'lines': [] }, 'peer_jitter': { - 'options': [None, 'Filter jitter', 'ms', 'peers', 'ntpd.peer_jitter', 'line'], + 'options': [None, 'Filter jitter', 'milliseconds', 'peers', 'ntpd.peer_jitter', 'line'], 'lines': [] }, 'peer_xleave': { - 'options': [None, 'Interleave delay', 'ms', 'peers', 'ntpd.peer_xleave', 'line'], + 'options': [None, 'Interleave delay', 'milliseconds', 'peers', 'ntpd.peer_xleave', 'line'], 'lines': [] }, 'peer_rootdelay': { - 'options': [None, 'Total roundtrip delay to the primary reference clock', 'ms', 'peers', + 'options': [None, 'Total roundtrip delay to the primary reference clock', 'milliseconds', 'peers', 'ntpd.peer_rootdelay', 'line'], 'lines': [] }, @@ -235,7 +233,6 @@ class Service(SocketService): SocketService.__init__(self, configuration=configuration, name=name) self.order = list(ORDER) self.definitions = dict(CHARTS) - self.port = 'ntp' self.dgram_socket = True self.system = System() @@ -244,7 +241,6 @@ class Service(SocketService): self.retries = 0 self.show_peers = self.configuration.get('show_peers', False) self.peer_rescan = self.configuration.get('peer_rescan', 60) - if self.show_peers: self.definitions.update(PEER_CHARTS) diff --git a/collectors/python.d.plugin/ntpd/ntpd.conf b/collectors/python.d.plugin/ntpd/ntpd.conf index 7adc4074..80bd468d 100644 --- a/collectors/python.d.plugin/ntpd/ntpd.conf +++ b/collectors/python.d.plugin/ntpd/ntpd.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -52,7 +50,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # # Additionally to the above, ntp also supports the following: # diff --git a/collectors/python.d.plugin/nvidia_smi/README.md b/collectors/python.d.plugin/nvidia_smi/README.md index 06acfc29..48b61195 100644 --- a/collectors/python.d.plugin/nvidia_smi/README.md +++ b/collectors/python.d.plugin/nvidia_smi/README.md @@ -36,4 +36,5 @@ Sample: ```yaml poll_seconds: 1 -```
\ No newline at end of file +``` +[]() diff --git a/collectors/python.d.plugin/nvidia_smi/nvidia_smi.chart.py b/collectors/python.d.plugin/nvidia_smi/nvidia_smi.chart.py index c3fff621..7cb816c0 100644 --- a/collectors/python.d.plugin/nvidia_smi/nvidia_smi.chart.py +++ b/collectors/python.d.plugin/nvidia_smi/nvidia_smi.chart.py @@ -15,6 +15,8 @@ disabled_by_default = True NVIDIA_SMI = 'nvidia-smi' +BAD_VALUE = 'N/A' + EMPTY_ROW = '' EMPTY_ROW_LIMIT = 500 POLLER_BREAK_ROW = '</nvidia_smi_log>' @@ -47,39 +49,39 @@ def gpu_charts(gpu): charts = { PCI_BANDWIDTH: { - 'options': [None, 'PCI Express Bandwidth Utilization', 'KB/s', fam, 'nvidia_smi.pci_bandwidth', 'area'], + 'options': [None, 'PCI Express Bandwidth Utilization', 'KiB/s', fam, 'nvidia_smi.pci_bandwidth', 'area'], 'lines': [ ['rx_util', 'rx', 'absolute', 1, 1], ['tx_util', 'tx', 'absolute', 1, -1], ] }, FAN_SPEED: { - 'options': [None, 'Fan Speed', '%', fam, 'nvidia_smi.fan_speed', 'line'], + 'options': [None, 'Fan Speed', 'percentage', fam, 'nvidia_smi.fan_speed', 'line'], 'lines': [ ['fan_speed', 'speed'], ] }, GPU_UTIL: { - 'options': [None, 'GPU Utilization', '%', fam, 'nvidia_smi.gpu_utilization', 'line'], + 'options': [None, 'GPU Utilization', 'percentage', fam, 'nvidia_smi.gpu_utilization', 'line'], 'lines': [ ['gpu_util', 'utilization'], ] }, MEM_UTIL: { - 'options': [None, 'Memory Bandwidth Utilization', '%', fam, 'nvidia_smi.mem_utilization', 'line'], + 'options': [None, 'Memory Bandwidth Utilization', 'percentage', fam, 'nvidia_smi.mem_utilization', 'line'], 'lines': [ ['memory_util', 'utilization'], ] }, ENCODER_UTIL: { - 'options': [None, 'Encoder/Decoder Utilization', '%', fam, 'nvidia_smi.encoder_utilization', 'line'], + 'options': [None, 'Encoder/Decoder Utilization', 'percentage', fam, 'nvidia_smi.encoder_utilization', 'line'], 'lines': [ ['encoder_util', 'encoder'], ['decoder_util', 'decoder'], ] }, MEM_ALLOCATED: { - 'options': [None, 'Memory Allocated', 'MB', fam, 'nvidia_smi.memory_allocated', 'line'], + 'options': [None, 'Memory Allocated', 'MiB', fam, 'nvidia_smi.memory_allocated', 'line'], 'lines': [ ['fb_memory_usage', 'used'], ] @@ -206,6 +208,15 @@ def handle_attr_error(method): return on_call +def handle_value_error(method): + def on_call(*args, **kwargs): + try: + return method(*args, **kwargs) + except ValueError: + return None + return on_call + + class GPU: def __init__(self, num, root): self.num = num @@ -272,6 +283,7 @@ class GPU: def mem_clock(self): return self.root.find('clocks').find('mem_clock').text.split()[0] + @handle_value_error @handle_attr_error def power_draw(self): return float(self.root.find('power_readings').find('power_draw').text.split()[0]) * 100 @@ -294,7 +306,9 @@ class GPU: 'power_draw': self.power_draw(), } - return dict(('gpu{0}_{1}'.format(self.num, k), v) for k, v in data.items() if v is not None) + return dict( + ('gpu{0}_{1}'.format(self.num, k), v) for k, v in data.items() if v is not None and v != BAD_VALUE + ) class Service(SimpleService): @@ -302,7 +316,6 @@ class Service(SimpleService): super(Service, self).__init__(configuration=configuration, name=name) self.order = list() self.definitions = dict() - poll = int(configuration.get('poll_seconds', 1)) self.poller = NvidiaSMIPoller(poll) diff --git a/collectors/python.d.plugin/nvidia_smi/nvidia_smi.conf b/collectors/python.d.plugin/nvidia_smi/nvidia_smi.conf index e1bcf3fa..53e544a5 100644 --- a/collectors/python.d.plugin/nvidia_smi/nvidia_smi.conf +++ b/collectors/python.d.plugin/nvidia_smi/nvidia_smi.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, example also supports the following: diff --git a/collectors/python.d.plugin/openldap/README.md b/collectors/python.d.plugin/openldap/README.md index 938535bc..629cc153 100644 --- a/collectors/python.d.plugin/openldap/README.md +++ b/collectors/python.d.plugin/openldap/README.md @@ -55,3 +55,5 @@ openldap: ``` --- + +[]() diff --git a/collectors/python.d.plugin/openldap/openldap.chart.py b/collectors/python.d.plugin/openldap/openldap.chart.py index 6342d386..768ed01e 100644 --- a/collectors/python.d.plugin/openldap/openldap.chart.py +++ b/collectors/python.d.plugin/openldap/openldap.chart.py @@ -11,8 +11,6 @@ except ImportError: from bases.FrameworkServices.SimpleService import SimpleService -# default module values (can be overridden per job in `config`) -priority = 60000 DEFAULT_SERVER = 'localhost' DEFAULT_PORT = '389' @@ -36,7 +34,7 @@ CHARTS = { ] }, 'bytes_sent': { - 'options': [None, 'Traffic', 'KB/s', 'ldap', 'openldap.traffic_stats', 'line'], + 'options': [None, 'Traffic', 'KiB/s', 'ldap', 'openldap.traffic_stats', 'line'], 'lines': [ ['bytes_sent', 'sent', 'incremental', 1, 1024] ] @@ -136,13 +134,11 @@ class Service(SimpleService): SimpleService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = CHARTS - self.server = configuration.get('server', DEFAULT_SERVER) self.port = configuration.get('port', DEFAULT_PORT) self.username = configuration.get('username') self.password = configuration.get('password') self.timeout = configuration.get('timeout', DEFAULT_TIMEOUT) - self.alive = False self.conn = None diff --git a/collectors/python.d.plugin/openldap/openldap.conf b/collectors/python.d.plugin/openldap/openldap.conf index 662cc58c..6182b3ee 100644 --- a/collectors/python.d.plugin/openldap/openldap.conf +++ b/collectors/python.d.plugin/openldap/openldap.conf @@ -28,11 +28,9 @@ update_every: 10 # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -59,7 +57,7 @@ update_every: 10 # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # ---------------------------------------------------------------------- diff --git a/collectors/python.d.plugin/ovpn_status_log/README.md b/collectors/python.d.plugin/ovpn_status_log/README.md index be1ea279..bcd1f00e 100644 --- a/collectors/python.d.plugin/ovpn_status_log/README.md +++ b/collectors/python.d.plugin/ovpn_status_log/README.md @@ -30,3 +30,5 @@ default ``` --- + +[]() diff --git a/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.chart.py b/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.chart.py index 64d7062d..dc7a6002 100644 --- a/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.chart.py +++ b/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.chart.py @@ -3,15 +3,18 @@ # Author: l2isbad # SPDX-License-Identifier: GPL-3.0-or-later -from re import compile as r_compile +import re from bases.FrameworkServices.SimpleService import SimpleService -priority = 60000 -retries = 60 + update_every = 10 -ORDER = ['users', 'traffic'] +ORDER = [ + 'users', + 'traffic', +] + CHARTS = { 'users': { 'options': [None, 'OpenVPN Active Users', 'active users', 'users', 'openvpn_status.users', 'line'], @@ -20,15 +23,20 @@ CHARTS = { ] }, 'traffic': { - 'options': [None, 'OpenVPN Traffic', 'KB/s', 'traffic', 'openvpn_status.traffic', 'area'], + 'options': [None, 'OpenVPN Traffic', 'KiB/s', 'traffic', 'openvpn_status.traffic', 'area'], 'lines': [ - ['bytes_in', 'in', 'incremental', 1, 1 << 10], ['bytes_out', 'out', 'incremental', 1, -1 << 10] + ['bytes_in', 'in', 'incremental', 1, 1 << 10], + ['bytes_out', 'out', 'incremental', -1, 1 << 10] ] } } -TLS_REGEX = r_compile(r'(?:[0-9a-f:]+|(?:\d{1,3}(?:\.\d{1,3}){3}(?::\d+)?)) (?P<bytes_in>\d+) (?P<bytes_out>\d+)') -STATIC_KEY_REGEX = r_compile(r'TCP/[A-Z]+ (?P<direction>(?:read|write)) bytes,(?P<bytes>\d+)') +TLS_REGEX = re.compile( + r'(?:[0-9a-f]+:[0-9a-f:]+|(?:\d{1,3}(?:\.\d{1,3}){3}(?::\d+)?)) (?P<bytes_in>\d+) (?P<bytes_out>\d+)' +) +STATIC_KEY_REGEX = re.compile( + r'TCP/[A-Z]+ (?P<direction>(?:read|write)) bytes,(?P<bytes>\d+)' +) class Service(SimpleService): diff --git a/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.conf b/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.conf index 6fb35a53..1d71f6b8 100644 --- a/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.conf +++ b/collectors/python.d.plugin/ovpn_status_log/ovpn_status_log.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, openvpn status log also supports the following: diff --git a/collectors/python.d.plugin/phpfpm/README.md b/collectors/python.d.plugin/phpfpm/README.md index 66930463..d3aa85a7 100644 --- a/collectors/python.d.plugin/phpfpm/README.md +++ b/collectors/python.d.plugin/phpfpm/README.md @@ -32,9 +32,10 @@ priority : 90100 local: url : 'http://localhost/status' - retries : 10 ``` Without configuration, module attempts to connect to `http://localhost/status` --- + +[]() diff --git a/collectors/python.d.plugin/phpfpm/phpfpm.chart.py b/collectors/python.d.plugin/phpfpm/phpfpm.chart.py index a3f0963f..70091e23 100644 --- a/collectors/python.d.plugin/phpfpm/phpfpm.chart.py +++ b/collectors/python.d.plugin/phpfpm/phpfpm.chart.py @@ -9,20 +9,8 @@ import re from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 -# default job configuration (overridden by python.d.plugin) -# config = {'local': { -# 'update_every': update_every, -# 'retries': retries, -# 'priority': priority, -# 'url': 'http://localhost/status?full&json' -# }} - -# charts order (can be overridden if you want less charts, or different order) +REGEX = re.compile(r'([a-z][a-z ]+): ([\d.]+)') POOL_INFO = [ ('active processes', 'active'), @@ -50,7 +38,14 @@ CALC = [ ('avg', average) ] -ORDER = ['connections', 'requests', 'performance', 'request_duration', 'request_cpu', 'request_mem'] +ORDER = [ + 'connections', + 'requests', + 'performance', + 'request_duration', + 'request_cpu', + 'request_mem', +] CHARTS = { 'connections': { @@ -85,7 +80,7 @@ CHARTS = { ] }, 'request_cpu': { - 'options': [None, 'PHP-FPM Request CPU', 'percent', 'request CPU', 'phpfpm.request_cpu', 'line'], + 'options': [None, 'PHP-FPM Request CPU', 'percentage', 'request CPU', 'phpfpm.request_cpu', 'line'], 'lines': [ ['minReqCpu', 'min'], ['maxReqCpu', 'max'], @@ -93,7 +88,7 @@ CHARTS = { ] }, 'request_mem': { - 'options': [None, 'PHP-FPM Request Memory', 'kilobytes', 'request memory', 'phpfpm.request_mem', 'line'], + 'options': [None, 'PHP-FPM Request Memory', 'KB', 'request memory', 'phpfpm.request_mem', 'line'], 'lines': [ ['minReqMem', 'min', 'absolute', 1, 1024], ['maxReqMem', 'max', 'absolute', 1, 1024], @@ -106,14 +101,14 @@ CHARTS = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - self.url = self.configuration.get('url', 'http://localhost/status?full&json') self.order = ORDER self.definitions = CHARTS - self.regex = re.compile(r'([a-z][a-z ]+): ([\d.]+)') + self.url = self.configuration.get('url', 'http://localhost/status?full&json') self.json = '&json' in self.url or '?json' in self.url self.json_full = self.url.endswith(('?full&json', '?json&full')) - self.if_all_processes_running = dict([(c_name + p_name, 0) for c_name, func in CALC - for metric, p_name in PER_PROCESS_INFO]) + self.if_all_processes_running = dict( + [(c_name + p_name, 0) for c_name, func in CALC for metric, p_name in PER_PROCESS_INFO] + ) def _get_data(self): """ @@ -124,7 +119,7 @@ class Service(UrlService): if not raw: return None - raw_json = parse_raw_data_(is_json=self.json, regex=self.regex, raw_data=raw) + raw_json = parse_raw_data_(is_json=self.json, raw_data=raw) # Per Pool info: active connections, requests and performance charts to_netdata = fetch_data_(raw_data=raw_json, metrics_list=POOL_INFO) @@ -160,7 +155,7 @@ def fetch_data_(raw_data, metrics_list, pid=''): return result -def parse_raw_data_(is_json, regex, raw_data): +def parse_raw_data_(is_json, raw_data): """ :param is_json: bool :param regex: compiled regular expr @@ -174,4 +169,4 @@ def parse_raw_data_(is_json, regex, raw_data): return dict() else: raw_data = ' '.join(raw_data.split()) - return dict(regex.findall(raw_data)) + return dict(REGEX.findall(raw_data)) diff --git a/collectors/python.d.plugin/phpfpm/phpfpm.conf b/collectors/python.d.plugin/phpfpm/phpfpm.conf index 571eb915..d3185390 100644 --- a/collectors/python.d.plugin/phpfpm/phpfpm.conf +++ b/collectors/python.d.plugin/phpfpm/phpfpm.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, PHP-FPM also supports the following: diff --git a/collectors/python.d.plugin/portcheck/README.md b/collectors/python.d.plugin/portcheck/README.md index f1338d57..8f289c8d 100644 --- a/collectors/python.d.plugin/portcheck/README.md +++ b/collectors/python.d.plugin/portcheck/README.md @@ -33,3 +33,5 @@ server: * Currently, the accuracy of the latency is low and should be used as reference only. --- + +[]() diff --git a/collectors/python.d.plugin/portcheck/portcheck.chart.py b/collectors/python.d.plugin/portcheck/portcheck.chart.py index e86f8254..8479e38e 100644 --- a/collectors/python.d.plugin/portcheck/portcheck.chart.py +++ b/collectors/python.d.plugin/portcheck/portcheck.chart.py @@ -12,9 +12,6 @@ except ImportError: from bases.FrameworkServices.SimpleService import SimpleService -# default module values (can be overridden per job in `config`) -priority = 60000 -retries = 60 PORT_LATENCY = 'connect' @@ -26,7 +23,7 @@ ORDER = ['latency', 'status'] CHARTS = { 'latency': { - 'options': [None, 'TCP connect latency', 'ms', 'latency', 'portcheck.latency', 'line'], + 'options': [None, 'TCP connect latency', 'milliseconds', 'latency', 'portcheck.latency', 'line'], 'lines': [ [PORT_LATENCY, 'connect', 'absolute', 100, 1000] ] @@ -121,7 +118,7 @@ class Service(SimpleService): :return: dict """ - af, _, proto, _, sa = socket_config + _, _, _, _, sa = socket_config port = str(sa[1]) try: self.debug('Connecting socket to "{address}", port {port}'.format(address=sa[0], port=port)) diff --git a/collectors/python.d.plugin/portcheck/portcheck.conf b/collectors/python.d.plugin/portcheck/portcheck.conf index b3dd8bd3..df67824b 100644 --- a/collectors/python.d.plugin/portcheck/portcheck.conf +++ b/collectors/python.d.plugin/portcheck/portcheck.conf @@ -27,6 +27,10 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes + # chart_cleanup sets the default chart cleanup interval in iterations. # A chart is marked as obsolete if it has not been updated # 'chart_cleanup' iterations in a row. @@ -60,7 +64,7 @@ chart_cleanup: 0 # # JOBs sharing a name are mutually exclusive # update_every: 1 # [optional] the JOB's data collection frequency # priority: 60000 # [optional] the JOB's order on the dashboard -# retries: 60 # [optional] the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # timeout: 1 # [optional] the socket timeout when connecting # host: 'dns or ip' # [required] the remote host address in either IPv4, IPv6 or as DNS name. # port: 22 # [required] the port number to check. Specify an integer, not service name. diff --git a/collectors/python.d.plugin/postfix/README.md b/collectors/python.d.plugin/postfix/README.md index 77c95ff4..e2147ac9 100644 --- a/collectors/python.d.plugin/postfix/README.md +++ b/collectors/python.d.plugin/postfix/README.md @@ -13,3 +13,5 @@ It produces only two charts: Configuration is not needed. --- + +[]() diff --git a/collectors/python.d.plugin/postfix/postfix.chart.py b/collectors/python.d.plugin/postfix/postfix.chart.py index bdbd0fee..b650514e 100644 --- a/collectors/python.d.plugin/postfix/postfix.chart.py +++ b/collectors/python.d.plugin/postfix/postfix.chart.py @@ -5,13 +5,12 @@ from bases.FrameworkServices.ExecutableService import ExecutableService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 +POSTQUEUE_COMMAND = 'postqueue -p' -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['qemails', 'qsize'] +ORDER = [ + 'qemails', + 'qsize', +] CHARTS = { 'qemails': { @@ -21,7 +20,7 @@ CHARTS = { ] }, 'qsize': { - 'options': [None, 'Postfix Queue Emails Size', 'emails size in KB', 'queue', 'postfix.qsize', 'area'], + 'options': [None, 'Postfix Queue Emails Size', 'KiB', 'queue', 'postfix.qsize', 'area'], 'lines': [ ['size', None, 'absolute'] ] @@ -32,9 +31,9 @@ CHARTS = { class Service(ExecutableService): def __init__(self, configuration=None, name=None): ExecutableService.__init__(self, configuration=configuration, name=name) - self.command = 'postqueue -p' self.order = ORDER self.definitions = CHARTS + self.command = POSTQUEUE_COMMAND def _get_data(self): """ diff --git a/collectors/python.d.plugin/postfix/postfix.conf b/collectors/python.d.plugin/postfix/postfix.conf index e0d5a5f8..a4d2472e 100644 --- a/collectors/python.d.plugin/postfix/postfix.conf +++ b/collectors/python.d.plugin/postfix/postfix.conf @@ -28,11 +28,9 @@ update_every: 10 # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -59,7 +57,7 @@ update_every: 10 # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, postfix also supports the following: diff --git a/collectors/python.d.plugin/postgres/README.md b/collectors/python.d.plugin/postgres/README.md index e7b108d3..9939a0c4 100644 --- a/collectors/python.d.plugin/postgres/README.md +++ b/collectors/python.d.plugin/postgres/README.md @@ -66,3 +66,5 @@ tcp: When no configuration file is found, module tries to connect to TCP/IP socket: `localhost:5432`. --- + +[]() diff --git a/collectors/python.d.plugin/postgres/postgres.chart.py b/collectors/python.d.plugin/postgres/postgres.chart.py index 7f43877c..e988eec3 100644 --- a/collectors/python.d.plugin/postgres/postgres.chart.py +++ b/collectors/python.d.plugin/postgres/postgres.chart.py @@ -16,13 +16,34 @@ except ImportError: from bases.FrameworkServices.SimpleService import SimpleService -# default module values -update_every = 1 -priority = 60000 -retries = 60 + +DEFAULT_PORT = 5432 +DEFAULT_USER = 'postgres' +DEFAULT_CONNECT_TIMEOUT = 2 # seconds +DEFAULT_STATEMENT_TIMEOUT = 5000 # ms + + +WAL = 'WAL' +ARCHIVE = 'ARCHIVE' +BACKENDS = 'BACKENDS' +TABLE_STATS = 'TABLE_STATS' +INDEX_STATS = 'INDEX_STATS' +DATABASE = 'DATABASE' +BGWRITER = 'BGWRITER' +LOCKS = 'LOCKS' +DATABASES = 'DATABASES' +STANDBY = 'STANDBY' +REPLICATION_SLOT = 'REPLICATION_SLOT' +STANDBY_DELTA = 'STANDBY_DELTA' +REPSLOT_FILES = 'REPSLOT_FILES' +IF_SUPERUSER = 'IF_SUPERUSER' +SERVER_VERSION = 'SERVER_VERSION' +AUTOVACUUM = 'AUTOVACUUM' +DIFF_LSN = 'DIFF_LSN' +WAL_WRITES = 'WAL_WRITES' METRICS = { - 'DATABASE': [ + DATABASE: [ 'connections', 'xact_commit', 'xact_rollback', @@ -38,32 +59,32 @@ METRICS = { 'temp_bytes', 'size' ], - 'BACKENDS': [ + BACKENDS: [ 'backends_active', 'backends_idle' ], - 'INDEX_STATS': [ + INDEX_STATS: [ 'index_count', 'index_size' ], - 'TABLE_STATS': [ + TABLE_STATS: [ 'table_size', 'table_count' ], - 'WAL': [ + WAL: [ 'written_wal', 'recycled_wal', 'total_wal' ], - 'WAL_WRITES': [ + WAL_WRITES: [ 'wal_writes' ], - 'ARCHIVE': [ + ARCHIVE: [ 'ready_count', 'done_count', 'file_count' ], - 'BGWRITER': [ + BGWRITER: [ 'checkpoint_scheduled', 'checkpoint_requested', 'buffers_checkpoint', @@ -73,7 +94,7 @@ METRICS = { 'buffers_alloc', 'buffers_backend_fsync' ], - 'LOCKS': [ + LOCKS: [ 'ExclusiveLock', 'RowShareLock', 'SIReadLock', @@ -84,27 +105,61 @@ METRICS = { 'ShareLock', 'RowExclusiveLock' ], - 'AUTOVACUUM': [ + AUTOVACUUM: [ 'analyze', 'vacuum_analyze', 'vacuum', 'vacuum_freeze', 'brin_summarize' ], - 'STANDBY_DELTA': [ + STANDBY_DELTA: [ 'sent_delta', 'write_delta', 'flush_delta', 'replay_delta' ], - 'REPSLOT_FILES': [ + REPSLOT_FILES: [ 'replslot_wal_keep', 'replslot_files' ] } -QUERIES = { - 'WAL': """ +NO_VERSION = 0 +DEFAULT = 'DEFAULT' +V96 = 'V96' +V10 = 'V10' +V11 = 'V11' + + +QUERY_WAL = { + DEFAULT: """ +SELECT + count(*) as total_wal, + count(*) FILTER (WHERE type = 'recycled') AS recycled_wal, + count(*) FILTER (WHERE type = 'written') AS written_wal +FROM + (SELECT + wal.name, + pg_walfile_name( + CASE pg_is_in_recovery() + WHEN true THEN NULL + ELSE pg_current_wal_lsn() + END ), + CASE + WHEN wal.name > pg_walfile_name( + CASE pg_is_in_recovery() + WHEN true THEN NULL + ELSE pg_current_wal_lsn() + END ) THEN 'recycled' + ELSE 'written' + END AS type + FROM pg_catalog.pg_ls_dir('pg_wal') AS wal(name) + WHERE name ~ '^[0-9A-F]{24}$' + ORDER BY + (pg_stat_file('pg_wal/'||name)).modification, + wal.name DESC) sub; +""", + V96: """ SELECT count(*) as total_wal, count(*) FILTER (WHERE type = 'recycled') AS recycled_wal, @@ -112,34 +167,49 @@ SELECT FROM (SELECT wal.name, - pg_{0}file_name( + pg_xlogfile_name( CASE pg_is_in_recovery() WHEN true THEN NULL - ELSE pg_current_{0}_{1}() + ELSE pg_current_xlog_location() END ), CASE - WHEN wal.name > pg_{0}file_name( + WHEN wal.name > pg_xlogfile_name( CASE pg_is_in_recovery() WHEN true THEN NULL - ELSE pg_current_{0}_{1}() + ELSE pg_current_xlog_location() END ) THEN 'recycled' ELSE 'written' END AS type - FROM pg_catalog.pg_ls_dir('pg_{0}') AS wal(name) - WHERE name ~ '^[0-9A-F]{{24}}$' + FROM pg_catalog.pg_ls_dir('pg_xlog') AS wal(name) + WHERE name ~ '^[0-9A-F]{24}$' ORDER BY - (pg_stat_file('pg_{0}/'||name)).modification, + (pg_stat_file('pg_xlog/'||name)).modification, wal.name DESC) sub; """, - 'ARCHIVE': """ +} + +QUERY_ARCHIVE = { + DEFAULT: """ +SELECT + CAST(COUNT(*) AS INT) AS file_count, + CAST(COALESCE(SUM(CAST(archive_file ~ $r$\.ready$$r$ as INT)),0) AS INT) AS ready_count, + CAST(COALESCE(SUM(CAST(archive_file ~ $r$\.done$$r$ AS INT)),0) AS INT) AS done_count +FROM + pg_catalog.pg_ls_dir('pg_wal/archive_status') AS archive_files (archive_file); +""", + V96: """ SELECT CAST(COUNT(*) AS INT) AS file_count, CAST(COALESCE(SUM(CAST(archive_file ~ $r$\.ready$$r$ as INT)),0) AS INT) AS ready_count, CAST(COALESCE(SUM(CAST(archive_file ~ $r$\.done$$r$ AS INT)),0) AS INT) AS done_count FROM - pg_catalog.pg_ls_dir('pg_{0}/archive_status') AS archive_files (archive_file); + pg_catalog.pg_ls_dir('pg_xlog/archive_status') AS archive_files (archive_file); + """, - 'BACKENDS': """ +} + +QUERY_BACKEND = { + DEFAULT: """ SELECT count(*) - (SELECT count(*) FROM pg_stat_activity @@ -151,21 +221,30 @@ SELECT AS backends_idle FROM pg_stat_activity; """, - 'TABLE_STATS': """ +} + +QUERY_TABLE_STATS = { + DEFAULT: """ SELECT ((sum(relpages) * 8) * 1024) AS table_size, count(1) AS table_count FROM pg_class WHERE relkind IN ('r', 't'); """, - 'INDEX_STATS': """ +} + +QUERY_INDEX_STATS = { + DEFAULT: """ SELECT ((sum(relpages) * 8) * 1024) AS index_size, count(1) AS index_count FROM pg_class WHERE relkind = 'i'; """, - 'DATABASE': """ +} + +QUERY_DATABASE = { + DEFAULT: """ SELECT datname AS database_name, numbackends AS connections, @@ -185,7 +264,10 @@ SELECT FROM pg_stat_database WHERE datname IN %(databases)s ; """, - 'BGWRITER': """ +} + +QUERY_BGWRITER = { + DEFAULT: """ SELECT checkpoints_timed AS checkpoint_scheduled, checkpoints_req AS checkpoint_requested, @@ -197,7 +279,10 @@ SELECT buffers_backend_fsync FROM pg_stat_bgwriter; """, - 'LOCKS': """ +} + +QUERY_LOCKS = { + DEFAULT: """ SELECT pg_database.datname as database_name, mode, @@ -208,7 +293,10 @@ INNER JOIN pg_database GROUP BY datname, mode ORDER BY datname, mode; """, - 'FIND_DATABASES': """ +} + +QUERY_DATABASES = { + DEFAULT: """ SELECT datname FROM pg_stat_database @@ -217,48 +305,129 @@ WHERE (SELECT current_user), datname, 'connect') AND NOT datname ~* '^template\d '; """, - 'FIND_STANDBY': """ +} + +QUERY_STANDBY = { + DEFAULT: """ SELECT application_name FROM pg_stat_replication WHERE application_name IS NOT NULL GROUP BY application_name; """, - 'FIND_REPLICATION_SLOT': """ +} + +QUERY_REPLICATION_SLOT = { + DEFAULT: """ SELECT slot_name FROM pg_replication_slots; +""" +} + +QUERY_STANDBY_DELTA = { + DEFAULT: """ +SELECT + application_name, + pg_wal_lsn_diff( + CASE pg_is_in_recovery() + WHEN true THEN pg_last_wal_receive_lsn() + ELSE pg_current_wal_lsn() + END, + sent_lsn) AS sent_delta, + pg_wal_lsn_diff( + CASE pg_is_in_recovery() + WHEN true THEN pg_last_wal_receive_lsn() + ELSE pg_current_wal_lsn() + END, + write_lsn) AS write_delta, + pg_wal_lsn_diff( + CASE pg_is_in_recovery() + WHEN true THEN pg_last_wal_receive_lsn() + ELSE pg_current_wal_lsn() + END, + flush_lsn) AS flush_delta, + pg_wal_lsn_diff( + CASE pg_is_in_recovery() + WHEN true THEN pg_last_wal_receive_lsn() + ELSE pg_current_wal_lsn() + END, + replay_lsn) AS replay_delta +FROM pg_stat_replication +WHERE application_name IS NOT NULL; """, - 'STANDBY_DELTA': """ + V96: """ SELECT application_name, - pg_{0}_{1}_diff( + pg_xlog_location_diff( CASE pg_is_in_recovery() - WHEN true THEN pg_last_{0}_receive_{1}() - ELSE pg_current_{0}_{1}() + WHEN true THEN pg_last_xlog_receive_location() + ELSE pg_current_xlog_location() END, - sent_{1}) AS sent_delta, - pg_{0}_{1}_diff( + sent_location) AS sent_delta, + pg_xlog_location_diff( CASE pg_is_in_recovery() - WHEN true THEN pg_last_{0}_receive_{1}() - ELSE pg_current_{0}_{1}() + WHEN true THEN pg_last_xlog_receive_location() + ELSE pg_current_xlog_location() END, - write_{1}) AS write_delta, - pg_{0}_{1}_diff( + write_location) AS write_delta, + pg_xlog_location_diff( CASE pg_is_in_recovery() - WHEN true THEN pg_last_{0}_receive_{1}() - ELSE pg_current_{0}_{1}() + WHEN true THEN pg_last_xlog_receive_location() + ELSE pg_current_xlog_location() END, - flush_{1}) AS flush_delta, - pg_{0}_{1}_diff( + flush_location) AS flush_delta, + pg_xlog_location_diff( CASE pg_is_in_recovery() - WHEN true THEN pg_last_{0}_receive_{1}() - ELSE pg_current_{0}_{1}() + WHEN true THEN pg_last_xlog_receive_location() + ELSE pg_current_xlog_location() END, - replay_{1}) AS replay_delta + replay_location) AS replay_delta FROM pg_stat_replication WHERE application_name IS NOT NULL; """, - 'REPSLOT_FILES': """ +} + +QUERY_REPSLOT_FILES = { + DEFAULT: """ +WITH wal_size AS ( + SELECT + setting::int AS val + FROM pg_settings + WHERE name = 'wal_segment_size' + ) +SELECT + slot_name, + slot_type, + replslot_wal_keep, + count(slot_file) AS replslot_files +FROM + (SELECT + slot.slot_name, + CASE + WHEN slot_file <> 'state' THEN 1 + END AS slot_file , + slot_type, + COALESCE ( + floor( + (pg_wal_lsn_diff(pg_current_wal_lsn (),slot.restart_lsn) + - (pg_walfile_name_offset (restart_lsn)).file_offset) / (s.val) + ),0) AS replslot_wal_keep + FROM pg_replication_slots slot + LEFT JOIN ( + SELECT + slot2.slot_name, + pg_ls_dir('pg_replslot/' || slot2.slot_name) AS slot_file + FROM pg_replication_slots slot2 + ) files (slot_name, slot_file) + ON slot.slot_name = files.slot_name + CROSS JOIN wal_size s + ) AS d +GROUP BY + slot_name, + slot_type, + replslot_wal_keep; +""", + V10: """ WITH wal_size AS ( SELECT current_setting('wal_block_size')::INT * setting::INT AS val @@ -297,13 +466,22 @@ GROUP BY slot_type, replslot_wal_keep; """, - 'IF_SUPERUSER': """ +} + +QUERY_SUPERUSER = { + DEFAULT: """ SELECT current_setting('is_superuser') = 'on' AS is_superuser; """, - 'DETECT_SERVER_VERSION': """ +} + +QUERY_SHOW_VERSION = { + DEFAULT: """ SHOW server_version_num; """, - 'AUTOVACUUM': """ +} + +QUERY_AUTOVACUUM = { + DEFAULT: """ SELECT count(*) FILTER (WHERE query LIKE 'autovacuum: ANALYZE%%') AS analyze, count(*) FILTER (WHERE query LIKE 'autovacuum: VACUUM ANALYZE%%') AS vacuum_analyze, @@ -315,23 +493,78 @@ SELECT FROM pg_stat_activity WHERE query NOT LIKE '%%pg_stat_activity%%'; """, - 'DIFF_LSN': """ +} + +QUERY_DIFF_LSN = { + DEFAULT: """ SELECT - pg_{0}_{1}_diff( + pg_wal_lsn_diff( CASE pg_is_in_recovery() - WHEN true THEN pg_last_{0}_receive_{1}() - ELSE pg_current_{0}_{1}() + WHEN true THEN pg_last_wal_receive_lsn() + ELSE pg_current_wal_lsn() END, '0/0') as wal_writes ; -""" +""", + V96: """ +SELECT + pg_xlog_location_diff( + CASE pg_is_in_recovery() + WHEN true THEN pg_last_xlog_receive_location() + ELSE pg_current_xlog_location() + END, + '0/0') as wal_writes ; +""", } -QUERY_STATS = { - QUERIES['DATABASE']: METRICS['DATABASE'], - QUERIES['BACKENDS']: METRICS['BACKENDS'], - QUERIES['LOCKS']: METRICS['LOCKS'] -} +def query_factory(name, version=NO_VERSION): + if name == BACKENDS: + return QUERY_BACKEND[DEFAULT] + elif name == TABLE_STATS: + return QUERY_TABLE_STATS[DEFAULT] + elif name == INDEX_STATS: + return QUERY_INDEX_STATS[DEFAULT] + elif name == DATABASE: + return QUERY_DATABASE[DEFAULT] + elif name == BGWRITER: + return QUERY_BGWRITER[DEFAULT] + elif name == LOCKS: + return QUERY_LOCKS[DEFAULT] + elif name == DATABASES: + return QUERY_DATABASES[DEFAULT] + elif name == STANDBY: + return QUERY_STANDBY[DEFAULT] + elif name == REPLICATION_SLOT: + return QUERY_REPLICATION_SLOT[DEFAULT] + elif name == IF_SUPERUSER: + return QUERY_SUPERUSER[DEFAULT] + elif name == SERVER_VERSION: + return QUERY_SHOW_VERSION[DEFAULT] + elif name == AUTOVACUUM: + return QUERY_AUTOVACUUM[DEFAULT] + elif name == WAL: + if version < 100000: + return QUERY_WAL[V96] + return QUERY_WAL[DEFAULT] + elif name == ARCHIVE: + if version < 100000: + return QUERY_ARCHIVE[V96] + return QUERY_ARCHIVE[DEFAULT] + elif name == STANDBY_DELTA: + if version < 100000: + return QUERY_STANDBY_DELTA[V96] + return QUERY_STANDBY_DELTA[DEFAULT] + elif name == REPSLOT_FILES: + if version < 110000: + return QUERY_REPSLOT_FILES[V10] + return QUERY_REPSLOT_FILES[DEFAULT] + elif name == DIFF_LSN: + if version < 100000: + return QUERY_DIFF_LSN[V96] + return QUERY_DIFF_LSN[DEFAULT] + + raise ValueError('unknown query') + ORDER = [ 'db_stat_temp_files', @@ -403,7 +636,7 @@ CHARTS = { ] }, 'db_stat_temp_bytes': { - 'options': [None, 'Temp files written to disk', 'KB/s', 'db statistics', 'postgres.db_stat_temp_bytes', + 'options': [None, 'Temp files written to disk', 'KiB/s', 'db statistics', 'postgres.db_stat_temp_bytes', 'line'], 'lines': [ ['temp_bytes', 'size', 'incremental', 1, 1024] @@ -417,7 +650,7 @@ CHARTS = { ] }, 'database_size': { - 'options': [None, 'Database size', 'MB', 'database size', 'postgres.db_size', 'stacked'], + 'options': [None, 'Database size', 'MiB', 'database size', 'postgres.db_size', 'stacked'], 'lines': [ ] }, @@ -436,7 +669,7 @@ CHARTS = { ] }, 'index_size': { - 'options': [None, 'Indexes size', 'MB', 'indexes', 'postgres.index_size', 'line'], + 'options': [None, 'Indexes size', 'MiB', 'indexes', 'postgres.index_size', 'line'], 'lines': [ ['index_size', 'size', 'absolute', 1, 1024 * 1024] ] @@ -448,7 +681,7 @@ CHARTS = { ] }, 'table_size': { - 'options': [None, 'Tables size', 'MB', 'tables', 'postgres.table_size', 'line'], + 'options': [None, 'Tables size', 'MiB', 'tables', 'postgres.table_size', 'line'], 'lines': [ ['table_size', 'size', 'absolute', 1, 1024 * 1024] ] @@ -462,7 +695,7 @@ CHARTS = { ] }, 'wal_writes': { - 'options': [None, 'Write-Ahead Logs', 'kilobytes/s', 'wal_writes', 'postgres.wal_writes', 'line'], + 'options': [None, 'Write-Ahead Logs', 'KiB/s', 'wal_writes', 'postgres.wal_writes', 'line'], 'lines': [ ['wal_writes', 'writes', 'incremental', 1, 1024] ] @@ -483,20 +716,20 @@ CHARTS = { ] }, 'stat_bgwriter_alloc': { - 'options': [None, 'Buffers allocated', 'kilobytes/s', 'bgwriter', 'postgres.stat_bgwriter_alloc', 'line'], + 'options': [None, 'Buffers allocated', 'KiB/s', 'bgwriter', 'postgres.stat_bgwriter_alloc', 'line'], 'lines': [ ['buffers_alloc', 'alloc', 'incremental', 1, 1024] ] }, 'stat_bgwriter_checkpoint': { - 'options': [None, 'Buffers written during checkpoints', 'kilobytes/s', 'bgwriter', + 'options': [None, 'Buffers written during checkpoints', 'KiB/s', 'bgwriter', 'postgres.stat_bgwriter_checkpoint', 'line'], 'lines': [ ['buffers_checkpoint', 'checkpoint', 'incremental', 1, 1024] ] }, 'stat_bgwriter_backend': { - 'options': [None, 'Buffers written directly by a backend', 'kilobytes/s', 'bgwriter', + 'options': [None, 'Buffers written directly by a backend', 'KiB/s', 'bgwriter', 'postgres.stat_bgwriter_backend', 'line'], 'lines': [ ['buffers_backend', 'backend', 'incremental', 1, 1024] @@ -509,7 +742,7 @@ CHARTS = { ] }, 'stat_bgwriter_bgwriter': { - 'options': [None, 'Buffers written by the background writer', 'kilobytes/s', 'bgwriter', + 'options': [None, 'Buffers written by the background writer', 'KiB/s', 'bgwriter', 'postgres.bgwriter_bgwriter', 'line'], 'lines': [ ['buffers_clean', 'clean', 'incremental', 1, 1024] @@ -533,7 +766,7 @@ CHARTS = { ] }, 'standby_delta': { - 'options': [None, 'Standby delta', 'kilobytes', 'replication delta', 'postgres.standby_delta', 'line'], + 'options': [None, 'Standby delta', 'KiB', 'replication delta', 'postgres.standby_delta', 'line'], 'lines': [ ['sent_delta', 'sent delta', 'absolute', 1, 1024], ['write_delta', 'write delta', 'absolute', 1, 1024], @@ -554,186 +787,218 @@ CHARTS = { class Service(SimpleService): def __init__(self, configuration=None, name=None): SimpleService.__init__(self, configuration=configuration, name=name) - self.order = ORDER[:] + self.order = list(ORDER) self.definitions = deepcopy(CHARTS) - self.table_stats = configuration.pop('table_stats', False) - self.index_stats = configuration.pop('index_stats', False) - self.database_poll = configuration.pop('database_poll', None) + self.do_table_stats = configuration.pop('table_stats', False) + self.do_index_stats = configuration.pop('index_stats', False) + self.databases_to_poll = configuration.pop('database_poll', None) + self.statement_timeout = configuration.pop('statement_timeout', DEFAULT_STATEMENT_TIMEOUT) self.configuration = configuration - self.connection = False + self.conn = None self.server_version = None - self.data = dict() - self.locks_zeroed = dict() + self.is_superuser = False + self.alive = False self.databases = list() self.secondaries = list() self.replication_slots = list() - self.queries = QUERY_STATS.copy() - - def _connect(self): - params = dict(user='postgres', - database=None, - password=None, - host=None, - port=5432) - params.update(self.configuration) - - if not self.connection: - try: - self.connection = psycopg2.connect(**params) - self.connection.set_isolation_level(extensions.ISOLATION_LEVEL_AUTOCOMMIT) - self.connection.set_session(readonly=True) - except OperationalError as error: - return False, str(error) - return True, True + self.queries = dict() + self.data = dict() + + def reconnect(self): + return self.connect() + + def connect(self): + if self.conn: + self.conn.close() + self.conn = None + + try: + params = dict( + host=None, + port=DEFAULT_PORT, + database=None, + user=DEFAULT_USER, + password=None, + connect_timeout=DEFAULT_CONNECT_TIMEOUT, + options='-c statement_timeout={0}'.format(self.statement_timeout), + ) + params.update(self.configuration) + + self.conn = psycopg2.connect(**params) + self.conn.set_isolation_level(extensions.ISOLATION_LEVEL_AUTOCOMMIT) + self.conn.set_session(readonly=True) + except OperationalError as error: + self.error(error) + self.alive = False + else: + self.alive = True + + return self.alive def check(self): if not PSYCOPG2: - self.error('\'python-psycopg2\' module is needed to use postgres.chart.py') + self.error("'python-psycopg2' package is needed to use postgres module") return False - result, error = self._connect() - if not result: - conf = dict((k, (lambda k, v: v if k != 'password' else '*****')(k, v)) - for k, v in self.configuration.items()) - self.error('Failed to connect to %s. Error: %s' % (str(conf), error)) + + if not self.connect(): + self.error('failed to connect to {0}'.format(hide_password(self.configuration))) return False + try: - cursor = self.connection.cursor() - self.databases = discover_databases_(cursor, QUERIES['FIND_DATABASES']) - is_superuser = check_if_superuser_(cursor, QUERIES['IF_SUPERUSER']) - self.secondaries = discover_secondaries_(cursor, QUERIES['FIND_STANDBY']) - self.server_version = detect_server_version(cursor, QUERIES['DETECT_SERVER_VERSION']) - if self.server_version >= 94000: - self.replication_slots = discover_replication_slots_(cursor, QUERIES['FIND_REPLICATION_SLOT']) - cursor.close() - - if self.database_poll and isinstance(self.database_poll, str): - self.databases = [dbase for dbase in self.databases if dbase in self.database_poll.split()] \ - or self.databases - - self.locks_zeroed = populate_lock_types(self.databases) - self.add_additional_queries_(is_superuser) - self.create_dynamic_charts_() - return True + self.check_queries() except Exception as error: - self.error(str(error)) + self.error(error) return False - def add_additional_queries_(self, is_superuser): + self.populate_queries() + self.create_dynamic_charts() - if self.server_version >= 100000: - wal = 'wal' - lsn = 'lsn' - else: - wal = 'xlog' - lsn = 'location' - self.queries[QUERIES['BGWRITER']] = METRICS['BGWRITER'] - self.queries[QUERIES['DIFF_LSN'].format(wal, lsn)] = METRICS['WAL_WRITES'] - self.queries[QUERIES['STANDBY_DELTA'].format(wal, lsn)] = METRICS['STANDBY_DELTA'] - - if self.index_stats: - self.queries[QUERIES['INDEX_STATS']] = METRICS['INDEX_STATS'] - if self.table_stats: - self.queries[QUERIES['TABLE_STATS']] = METRICS['TABLE_STATS'] - if is_superuser: - self.queries[QUERIES['ARCHIVE'].format(wal)] = METRICS['ARCHIVE'] - if self.server_version >= 90400: - self.queries[QUERIES['WAL'].format(wal, lsn)] = METRICS['WAL'] - if self.server_version >= 100000: - self.queries[QUERIES['REPSLOT_FILES']] = METRICS['REPSLOT_FILES'] - if self.server_version >= 90400: - self.queries[QUERIES['AUTOVACUUM']] = METRICS['AUTOVACUUM'] + return True - def create_dynamic_charts_(self): + def get_data(self): + if not self.alive and not self.reconnect(): + return None - for database_name in self.databases[::-1]: - self.definitions['database_size']['lines'].append( - [database_name + '_size', database_name, 'absolute', 1, 1024 * 1024]) - for chart_name in [name for name in self.order if name.startswith('db_stat')]: - add_database_stat_chart_(order=self.order, definitions=self.definitions, - name=chart_name, database_name=database_name) + try: + cursor = self.conn.cursor(cursor_factory=DictCursor) - add_database_lock_chart_(order=self.order, definitions=self.definitions, database_name=database_name) + self.data.update(zero_lock_types(self.databases)) - for application_name in self.secondaries[::-1]: - add_replication_delta_chart_( - order=self.order, - definitions=self.definitions, - name='standby_delta', - application_name=application_name) + for query, metrics in self.queries.items(): + self.query_stats(cursor, query, metrics) - for slot_name in self.replication_slots[::-1]: - add_replication_slot_chart_( - order=self.order, - definitions=self.definitions, - name='replication_slot', - slot_name=slot_name) - - def _get_data(self): - result, _ = self._connect() - if result: - cursor = self.connection.cursor(cursor_factory=DictCursor) - try: - self.data.update(self.locks_zeroed) - for query, metrics in self.queries.items(): - self.query_stats_(cursor, query, metrics) - - except OperationalError: - self.connection = False - cursor.close() - return None - else: - cursor.close() - return self.data - else: + except OperationalError: + self.alive = False return None - def query_stats_(self, cursor, query, metrics): + cursor.close() + + return self.data + + def query_stats(self, cursor, query, metrics): cursor.execute(query, dict(databases=tuple(self.databases))) + for row in cursor: for metric in metrics: + # databases if 'database_name' in row: dimension_id = '_'.join([row['database_name'], metric]) + # secondaries elif 'application_name' in row: dimension_id = '_'.join([row['application_name'], metric]) + # replication slots elif 'slot_name' in row: dimension_id = '_'.join([row['slot_name'], metric]) + # other else: dimension_id = metric + if metric in row: if row[metric] is not None: self.data[dimension_id] = int(row[metric]) elif 'locks_count' in row: - self.data[dimension_id] = row['locks_count'] if metric == row['mode'] else 0 + if metric == row['mode']: + self.data[dimension_id] = row['locks_count'] + def check_queries(self): + cursor = self.conn.cursor() -def discover_databases_(cursor, query): - cursor.execute(query) - result = list() - for db in [database[0] for database in cursor]: - if db not in result: - result.append(db) - return result + self.server_version = detect_server_version(cursor, query_factory(SERVER_VERSION)) + self.debug('server version: {0}'.format(self.server_version)) + self.is_superuser = check_if_superuser(cursor, query_factory(IF_SUPERUSER)) + self.debug('superuser: {0}'.format(self.is_superuser)) -def discover_secondaries_(cursor, query): - cursor.execute(query) - result = list() - for sc in [standby[0] for standby in cursor]: - if sc not in result: - result.append(sc) - return result + self.databases = discover(cursor, query_factory(DATABASES)) + self.debug('discovered databases {0}'.format(self.databases)) + if self.databases_to_poll: + to_poll = self.databases_to_poll.split() + self.databases = [db for db in self.databases if db in to_poll] or self.databases + + self.secondaries = discover(cursor, query_factory(STANDBY)) + self.debug('discovered secondaries: {0}'.format(self.secondaries)) + + if self.server_version >= 94000: + self.replication_slots = discover(cursor, query_factory(REPLICATION_SLOT)) + self.debug('discovered replication slots: {0}'.format(self.replication_slots)) + + cursor.close() + + def populate_queries(self): + self.queries[query_factory(DATABASE)] = METRICS[DATABASE] + self.queries[query_factory(BACKENDS)] = METRICS[BACKENDS] + self.queries[query_factory(LOCKS)] = METRICS[LOCKS] + self.queries[query_factory(BGWRITER)] = METRICS[BGWRITER] + self.queries[query_factory(DIFF_LSN, self.server_version)] = METRICS[WAL_WRITES] + self.queries[query_factory(STANDBY_DELTA, self.server_version)] = METRICS[STANDBY_DELTA] + + if self.do_index_stats: + self.queries[query_factory(INDEX_STATS)] = METRICS[INDEX_STATS] + if self.do_table_stats: + self.queries[query_factory(TABLE_STATS)] = METRICS[TABLE_STATS] + + if self.is_superuser: + self.queries[query_factory(ARCHIVE, self.server_version)] = METRICS[ARCHIVE] + + if self.server_version >= 90400: + self.queries[query_factory(WAL, self.server_version)] = METRICS[WAL] + + if self.server_version >= 100000: + self.queries[query_factory(REPSLOT_FILES, self.server_version)] = METRICS[REPSLOT_FILES] + + if self.server_version >= 90400: + self.queries[query_factory(AUTOVACUUM)] = METRICS[AUTOVACUUM] + + def create_dynamic_charts(self): + for database_name in self.databases[::-1]: + dim = [ + database_name + '_size', + database_name, + 'absolute', + 1, + 1024 * 1024, + ] + self.definitions['database_size']['lines'].append(dim) + for chart_name in [name for name in self.order if name.startswith('db_stat')]: + add_database_stat_chart( + order=self.order, + definitions=self.definitions, + name=chart_name, + database_name=database_name, + ) + add_database_lock_chart( + order=self.order, + definitions=self.definitions, + database_name=database_name, + ) + + for application_name in self.secondaries[::-1]: + add_replication_delta_chart( + order=self.order, + definitions=self.definitions, + name='standby_delta', + application_name=application_name, + ) + + for slot_name in self.replication_slots[::-1]: + add_replication_slot_chart( + order=self.order, + definitions=self.definitions, + name='replication_slot', + slot_name=slot_name, + ) -def discover_replication_slots_(cursor, query): +def discover(cursor, query): cursor.execute(query) result = list() - for slot in [replication_slot[0] for replication_slot in cursor]: - if slot not in result: - result.append(slot) + for v in [value[0] for value in cursor]: + if v not in result: + result.append(v) return result -def check_if_superuser_(cursor, query): +def check_if_superuser(cursor, query): cursor.execute(query) return cursor.fetchone()[0] @@ -743,7 +1008,7 @@ def detect_server_version(cursor, query): return int(cursor.fetchone()[0]) -def populate_lock_types(databases): +def zero_lock_types(databases): result = dict() for database in databases: for lock_type in METRICS['LOCKS']: @@ -753,7 +1018,11 @@ def populate_lock_types(databases): return result -def add_database_lock_chart_(order, definitions, database_name): +def hide_password(config): + return dict((k, v if k != 'password' else '*****') for k, v in config.items()) + + +def add_database_lock_chart(order, definitions, database_name): def create_lines(database): result = list() for lock_type in METRICS['LOCKS']: @@ -770,7 +1039,7 @@ def add_database_lock_chart_(order, definitions, database_name): } -def add_database_stat_chart_(order, definitions, name, database_name): +def add_database_stat_chart(order, definitions, name, database_name): def create_lines(database, lines): result = list() for line in lines: @@ -787,7 +1056,7 @@ def add_database_stat_chart_(order, definitions, name, database_name): 'lines': create_lines(database_name, chart_template['lines'])} -def add_replication_delta_chart_(order, definitions, name, application_name): +def add_replication_delta_chart(order, definitions, name, application_name): def create_lines(standby, lines): result = list() for line in lines: @@ -799,13 +1068,13 @@ def add_replication_delta_chart_(order, definitions, name, application_name): chart_name = '_'.join([application_name, name]) position = order.index('database_size') order.insert(position, chart_name) - name, title, units, family, context, chart_type = chart_template['options'] + name, title, units, _, context, chart_type = chart_template['options'] definitions[chart_name] = { 'options': [name, title + ': ' + application_name, units, 'replication delta', context, chart_type], 'lines': create_lines(application_name, chart_template['lines'])} -def add_replication_slot_chart_(order, definitions, name, slot_name): +def add_replication_slot_chart(order, definitions, name, slot_name): def create_lines(slot, lines): result = list() for line in lines: @@ -817,7 +1086,7 @@ def add_replication_slot_chart_(order, definitions, name, slot_name): chart_name = '_'.join([slot_name, name]) position = order.index('database_size') order.insert(position, chart_name) - name, title, units, family, context, chart_type = chart_template['options'] + name, title, units, _, context, chart_type = chart_template['options'] definitions[chart_name] = { 'options': [name, title + ': ' + slot_name, units, 'replication slot files', context, chart_type], 'lines': create_lines(slot_name, chart_template['lines'])} diff --git a/collectors/python.d.plugin/postgres/postgres.conf b/collectors/python.d.plugin/postgres/postgres.conf index b69ca371..cde698f3 100644 --- a/collectors/python.d.plugin/postgres/postgres.conf +++ b/collectors/python.d.plugin/postgres/postgres.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,18 +56,20 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # A single connection is required in order to pull statistics. # # Connections can be configured with the following options: # -# database : 'example_db_name' -# user : 'example_user' -# password : 'example_pass' -# host : 'localhost' -# port : 5432 +# database : 'example_db_name' +# user : 'example_user' +# password : 'example_pass' +# host : 'localhost' +# port : 5432 +# connect_timeout : 2 # in seconds, default is 2 +# statement_timeout : 2000 # in ms, default is 2000 # # Additionally, the following options allow selective disabling of charts # diff --git a/collectors/python.d.plugin/powerdns/README.md b/collectors/python.d.plugin/powerdns/README.md index 3c4b145e..61aa5f6b 100644 --- a/collectors/python.d.plugin/powerdns/README.md +++ b/collectors/python.d.plugin/powerdns/README.md @@ -75,3 +75,5 @@ local: ``` --- + +[]() diff --git a/collectors/python.d.plugin/powerdns/powerdns.chart.py b/collectors/python.d.plugin/powerdns/powerdns.chart.py index 4264621b..7ed1554f 100644 --- a/collectors/python.d.plugin/powerdns/powerdns.chart.py +++ b/collectors/python.d.plugin/powerdns/powerdns.chart.py @@ -8,11 +8,14 @@ from json import loads from bases.FrameworkServices.UrlService import UrlService -priority = 60000 -retries = 60 -# update_every = 3 -ORDER = ['questions', 'cache_usage', 'cache_size', 'latency'] +ORDER = [ + 'questions', + 'cache_usage', + 'cache_size', + 'latency', +] + CHARTS = { 'questions': { 'options': [None, 'PowerDNS Queries and Answers', 'count', 'questions', 'powerdns.questions', 'line'], diff --git a/collectors/python.d.plugin/powerdns/powerdns.conf b/collectors/python.d.plugin/powerdns/powerdns.conf index ca6200df..559bf175 100644 --- a/collectors/python.d.plugin/powerdns/powerdns.conf +++ b/collectors/python.d.plugin/powerdns/powerdns.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, apache also supports the following: diff --git a/collectors/python.d.plugin/proxysql/README.md b/collectors/python.d.plugin/proxysql/README.md index 02388276..6e5a2127 100644 --- a/collectors/python.d.plugin/proxysql/README.md +++ b/collectors/python.d.plugin/proxysql/README.md @@ -60,3 +60,5 @@ tcpipv4: If no configuration is given, module will fail to run. --- + +[]() diff --git a/collectors/python.d.plugin/proxysql/proxysql.chart.py b/collectors/python.d.plugin/proxysql/proxysql.chart.py index f7e3d49f..c9714748 100644 --- a/collectors/python.d.plugin/proxysql/proxysql.chart.py +++ b/collectors/python.d.plugin/proxysql/proxysql.chart.py @@ -5,11 +5,6 @@ from bases.FrameworkServices.MySQLService import MySQLService -# default module values (can be overridden per job in `config`) -# update_every = 3 -priority = 60000 -retries = 60 - def query(table, *params): return 'SELECT {params} FROM {table}'.format(table=table, params=', '.join(params)) @@ -133,8 +128,8 @@ CHARTS = { 'options': [None, 'ProxySQL Backend Overall Bandwidth', 'kilobits/s', 'overall_bandwidth', 'proxysql.pool_overall_net', 'area'], 'lines': [ - ['bytes_data_recv', 'in', 'incremental', 8, 1024], - ['bytes_data_sent', 'out', 'incremental', -8, 1024] + ['bytes_data_recv', 'in', 'incremental', 8, 1000], + ['bytes_data_sent', 'out', 'incremental', -8, 1000] ] }, 'questions': { @@ -156,7 +151,7 @@ CHARTS = { ] }, 'pool_latency': { - 'options': [None, 'ProxySQL Backend Latency', 'ms', 'latency', 'proxysql.latency', 'line'], + 'options': [None, 'ProxySQL Backend Latency', 'milliseconds', 'latency', 'proxysql.latency', 'line'], 'lines': [] }, 'connections': { @@ -194,7 +189,7 @@ CHARTS = { 'lines': [] }, 'commands_duration': { - 'options': [None, 'ProxySQL Commands Duration', 'ms', 'commands', 'proxysql.commands_duration', 'line'], + 'options': [None, 'ProxySQL Commands Duration', 'milliseconds', 'commands', 'proxysql.commands_duration', 'line'], 'lines': [] } } diff --git a/collectors/python.d.plugin/proxysql/proxysql.conf b/collectors/python.d.plugin/proxysql/proxysql.conf index d29c2e5b..3c503a89 100644 --- a/collectors/python.d.plugin/proxysql/proxysql.conf +++ b/collectors/python.d.plugin/proxysql/proxysql.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, proxysql also supports the following: diff --git a/collectors/python.d.plugin/puppet/README.md b/collectors/python.d.plugin/puppet/README.md index 8304c831..b97eb70c 100644 --- a/collectors/python.d.plugin/puppet/README.md +++ b/collectors/python.d.plugin/puppet/README.md @@ -26,16 +26,13 @@ puppetdb: tls_cert_file: /path/to/client.crt tls_key_file: /path/to/client.key autodetection_retry: 1 - retries: 3600 puppetserver: url: 'https://fqdn.example.com:8140' autodetection_retry: 1 - retries: 3600 ``` -When no configuration is given then `https://fqdn.example.com:8140` is -tried without any retries. +When no configuration is given, module uses `https://fqdn.example.com:8140`. ### notes @@ -46,3 +43,5 @@ tried without any retries. to default PuppetDB configuration though. --- + +[]() diff --git a/collectors/python.d.plugin/puppet/puppet.chart.py b/collectors/python.d.plugin/puppet/puppet.chart.py index 5c8e48bd..30e219da 100644 --- a/collectors/python.d.plugin/puppet/puppet.chart.py +++ b/collectors/python.d.plugin/puppet/puppet.chart.py @@ -11,29 +11,31 @@ # and tls_cert_file options then. # -from bases.FrameworkServices.UrlService import UrlService -from json import loads import socket +from json import loads + +from bases.FrameworkServices.UrlService import UrlService + update_every = 5 -priority = 60000 -# very long clojure-based service startup time -retries = 180 -MB = 1048576 + +MiB = 1 << 20 CPU_SCALE = 1000 + ORDER = [ 'jvm_heap', 'jvm_nonheap', 'cpu', 'fd_open', ] + CHARTS = { 'jvm_heap': { - 'options': [None, 'JVM Heap', 'MB', 'resources', 'puppet.jvm', 'area'], + 'options': [None, 'JVM Heap', 'MiB', 'resources', 'puppet.jvm', 'area'], 'lines': [ - ['jvm_heap_committed', 'committed', 'absolute', 1, MB], - ['jvm_heap_used', 'used', 'absolute', 1, MB], + ['jvm_heap_committed', 'committed', 'absolute', 1, MiB], + ['jvm_heap_used', 'used', 'absolute', 1, MiB], ], 'variables': [ ['jvm_heap_max'], @@ -41,10 +43,10 @@ CHARTS = { ], }, 'jvm_nonheap': { - 'options': [None, 'JVM Non-Heap', 'MB', 'resources', 'puppet.jvm', 'area'], + 'options': [None, 'JVM Non-Heap', 'MiB', 'resources', 'puppet.jvm', 'area'], 'lines': [ - ['jvm_nonheap_committed', 'committed', 'absolute', 1, MB], - ['jvm_nonheap_used', 'used', 'absolute', 1, MB], + ['jvm_nonheap_committed', 'committed', 'absolute', 1, MiB], + ['jvm_nonheap_used', 'used', 'absolute', 1, MiB], ], 'variables': [ ['jvm_nonheap_max'], @@ -73,9 +75,9 @@ CHARTS = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - self.url = 'https://{0}:8140'.format(socket.getfqdn()) self.order = ORDER self.definitions = CHARTS + self.url = 'https://{0}:8140'.format(socket.getfqdn()) def _get_data(self): # NOTE: there are several ways to retrieve data diff --git a/collectors/python.d.plugin/puppet/puppet.conf b/collectors/python.d.plugin/puppet/puppet.conf index 991bfabe..ff5c3d02 100644 --- a/collectors/python.d.plugin/puppet/puppet.conf +++ b/collectors/python.d.plugin/puppet/puppet.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # These configuration comes from UrlService base: @@ -89,10 +87,8 @@ # tls_cert_file: /path/to/client.crt # tls_key_file: /path/to/client.key # autodetection_retry: 1 -# retries: 3600 # # puppetserver: # url: 'https://fqdn.example.com:8140' # autodetection_retry: 1 -# retries: 3600 # diff --git a/collectors/python.d.plugin/python.d.conf b/collectors/python.d.plugin/python.d.conf index 40c8c033..72236209 100644 --- a/collectors/python.d.plugin/python.d.conf +++ b/collectors/python.d.plugin/python.d.conf @@ -28,6 +28,7 @@ gc_interval: 300 # apache: yes # apache_cache has been replaced by web_log +# adaptec_raid: yes apache_cache: no # beanstalk: yes # bind_rndc: yes @@ -39,6 +40,7 @@ chrony: no # cpuidle: yes # dns_query_time: yes # dnsdist: yes +# dockerd: yes # dovecot: yes # elasticsearch: yes @@ -54,6 +56,7 @@ go_expvar: no gunicorn_log: no # haproxy: yes # hddtemp: yes +# httpcheck: yes # icecast: yes # ipfs: yes # isc_dhcpd: yes @@ -61,6 +64,7 @@ gunicorn_log: no # litespeed: yes logind: no # mdstat: yes +# megacli: yes # memcached: yes # mongodb: yes # monit: yes @@ -76,6 +80,7 @@ nginx_log: no # openldap: yes # ovpn_status_log: yes # phpfpm: yes +# portcheck: yes # postfix: yes # postgres: yes # powerdns: yes @@ -91,6 +96,7 @@ nginx_log: no # spigotmc: yes # springboot: yes # squid: yes +# traefik: yes # tomcat: yes # tor: yes unbound: no diff --git a/collectors/python.d.plugin/python.d.plugin b/collectors/python.d.plugin/python.d.plugin deleted file mode 100644 index efff2273..00000000 --- a/collectors/python.d.plugin/python.d.plugin +++ /dev/null @@ -1,427 +0,0 @@ -#!/usr/bin/env bash -'''':; exec "$(command -v python || command -v python3 || command -v python2 || -echo "ERROR python IS NOT AVAILABLE IN THIS SYSTEM")" "$0" "$@" # ''' - -# -*- coding: utf-8 -*- -# Description: -# Author: Pawel Krupa (paulfantom) -# Author: Ilya Mashchenko (l2isbad) -# SPDX-License-Identifier: GPL-3.0-or-later - -import gc -import os -import sys -import threading - -from re import sub -from sys import version_info, argv -from time import sleep - -GC_RUN = True -GC_COLLECT_EVERY = 300 - -PY_VERSION = version_info[:2] - -USER_CONFIG_DIR = os.getenv('NETDATA_USER_CONFIG_DIR', '/usr/local/etc/netdata') -STOCK_CONFIG_DIR = os.getenv('NETDATA_STOCK_CONFIG_DIR', '/usr/local/lib/netdata/conf.d') - -PLUGINS_USER_CONFIG_DIR = os.path.join(USER_CONFIG_DIR, 'python.d') -PLUGINS_STOCK_CONFIG_DIR = os.path.join(STOCK_CONFIG_DIR, 'python.d') - - -PLUGINS_DIR = os.path.abspath(os.getenv( - 'NETDATA_PLUGINS_DIR', - os.path.dirname(__file__)) + '/../python.d') - - -PYTHON_MODULES_DIR = os.path.join(PLUGINS_DIR, 'python_modules') - -sys.path.append(PYTHON_MODULES_DIR) - -from bases.loaders import ModuleAndConfigLoader # noqa: E402 -from bases.loggers import PythonDLogger # noqa: E402 -from bases.collection import setdefault_values, run_and_exit # noqa: E402 - -try: - from collections import OrderedDict -except ImportError: - from third_party.ordereddict import OrderedDict - -BASE_CONFIG = {'update_every': os.getenv('NETDATA_UPDATE_EVERY', 1), - 'retries': 60, - 'priority': 60000, - 'autodetection_retry': 0, - 'chart_cleanup': 10, - 'name': str()} - - -MODULE_EXTENSION = '.chart.py' -OBSOLETE_MODULES = ['apache_cache', 'gunicorn_log', 'nginx_log', 'cpufreq'] - - -def module_ok(m): - return m.endswith(MODULE_EXTENSION) and m[:-len(MODULE_EXTENSION)] not in OBSOLETE_MODULES - - -ALL_MODULES = [m for m in sorted(os.listdir(PLUGINS_DIR)) if module_ok(m)] - - -def parse_cmd(): - debug = 'debug' in argv[1:] - trace = 'trace' in argv[1:] - override_update_every = next((arg for arg in argv[1:] if arg.isdigit() and int(arg) > 1), False) - modules = [''.join([m, MODULE_EXTENSION]) for m in argv[1:] if ''.join([m, MODULE_EXTENSION]) in ALL_MODULES] - return debug, trace, override_update_every, modules or ALL_MODULES - - -def multi_job_check(config): - return next((True for key in config if isinstance(config[key], dict)), False) - - -class RawModule: - def __init__(self, name, path, explicitly_enabled=True): - self.name = name - self.path = path - self.explicitly_enabled = explicitly_enabled - - -class Job(object): - def __init__(self, initialized_job, job_id): - """ - :param initialized_job: instance of <Class Service> - :param job_id: <str> - """ - self.job = initialized_job - self.id = job_id # key in Modules.jobs() - self.module_name = self.job.__module__ # used in Plugin.delete_job() - self.recheck_every = self.job.configuration.pop('autodetection_retry') - self.checked = False # used in Plugin.check_job() - self.created = False # used in Plugin.create_job_charts() - if self.job.update_every < int(OVERRIDE_UPDATE_EVERY): - self.job.update_every = int(OVERRIDE_UPDATE_EVERY) - - def __getattr__(self, item): - return getattr(self.job, item) - - def __repr__(self): - return self.job.__repr__() - - def is_dead(self): - return bool(self.ident) and not self.is_alive() - - def not_launched(self): - return not bool(self.ident) - - def is_autodetect(self): - return self.recheck_every - - -class Module(object): - def __init__(self, service, config): - """ - :param service: <Module> - :param config: <dict> - """ - self.service = service - self.name = service.__name__ - self.config = self.jobs_configurations_builder(config) - self.jobs = OrderedDict() - self.counter = 1 - - self.initialize_jobs() - - def __repr__(self): - return "<Class Module '{name}'>".format(name=self.name) - - def __iter__(self): - return iter(OrderedDict(self.jobs).values()) - - def __getitem__(self, item): - return self.jobs[item] - - def __delitem__(self, key): - del self.jobs[key] - - def __len__(self): - return len(self.jobs) - - def __bool__(self): - return bool(self.jobs) - - def __nonzero__(self): - return self.__bool__() - - def jobs_configurations_builder(self, config): - """ - :param config: <dict> - :return: - """ - counter = 0 - job_base_config = dict() - - for attr in BASE_CONFIG: - job_base_config[attr] = config.pop(attr, getattr(self.service, attr, BASE_CONFIG[attr])) - - if not config: - config = {str(): dict()} - elif not multi_job_check(config): - config = {str(): config} - - for job_name in config: - if not isinstance(config[job_name], dict): - continue - - job_config = setdefault_values(config[job_name], base_dict=job_base_config) - job_name = sub(r'\s+', '_', job_name) - config[job_name]['name'] = sub(r'\s+', '_', config[job_name]['name']) - counter += 1 - job_id = 'job' + str(counter).zfill(3) - - yield job_id, job_name, job_config - - def initialize_jobs(self): - """ - :return: - """ - for job_id, job_name, job_config in self.config: - job_config['job_name'] = job_name - job_config['override_name'] = job_config.pop('name') - - try: - initialized_job = self.service.Service(configuration=job_config) - except Exception as error: - Logger.error("job initialization: '{module_name} {job_name}' " - "=> ['FAILED'] ({error})".format(module_name=self.name, - job_name=job_name, - error=error)) - continue - else: - Logger.debug("job initialization: '{module_name} {job_name}' " - "=> ['OK']".format(module_name=self.name, - job_name=job_name or self.name)) - self.jobs[job_id] = Job(initialized_job=initialized_job, - job_id=job_id) - del self.config - del self.service - - -class Plugin(object): - def __init__(self): - self.loader = ModuleAndConfigLoader() - self.modules = OrderedDict() - self.sleep_time = 1 - self.runs_counter = 0 - - user_config = os.path.join(USER_CONFIG_DIR, 'python.d.conf') - stock_config = os.path.join(STOCK_CONFIG_DIR, 'python.d.conf') - - Logger.debug("loading '{0}'".format(user_config)) - self.config, error = self.loader.load_config_from_file(user_config) - - if error: - Logger.error("cannot load '{0}': {1}. Will try stock version.".format(user_config, error)) - Logger.debug("loading '{0}'".format(stock_config)) - self.config, error = self.loader.load_config_from_file(stock_config) - if error: - Logger.error("cannot load '{0}': {1}".format(stock_config, error)) - - self.do_gc = self.config.get("gc_run", GC_RUN) - self.gc_interval = self.config.get("gc_interval", GC_COLLECT_EVERY) - - if not self.config.get('enabled', True): - run_and_exit(Logger.info)('DISABLED in configuration file.') - - self.load_and_initialize_modules() - if not self.modules: - run_and_exit(Logger.info)('No modules to run. Exit...') - - def __iter__(self): - return iter(OrderedDict(self.modules).values()) - - @property - def jobs(self): - return (job for mod in self for job in mod) - - @property - def dead_jobs(self): - return (job for job in self.jobs if job.is_dead()) - - @property - def autodetect_jobs(self): - return [job for job in self.jobs if job.not_launched()] - - def enabled_modules(self): - for mod in MODULES_TO_RUN: - mod_name = mod[:-len(MODULE_EXTENSION)] - mod_path = os.path.join(PLUGINS_DIR, mod) - if any( - [ - self.config.get('default_run', True) and self.config.get(mod_name, True), - (not self.config.get('default_run')) and self.config.get(mod_name), - ] - ): - yield RawModule( - name=mod_name, - path=mod_path, - explicitly_enabled=self.config.get(mod_name), - ) - - def load_and_initialize_modules(self): - for mod in self.enabled_modules(): - - # Load module from file ------------------------------------------------------------ - loaded_module, error = self.loader.load_module_from_file(mod.name, mod.path) - log = Logger.error if error else Logger.debug - log("module load source: '{module_name}' => [{status}]".format(status='FAILED' if error else 'OK', - module_name=mod.name)) - if error: - Logger.error("load source error : {0}".format(error)) - continue - - # Load module config from file ------------------------------------------------------ - user_config = os.path.join(PLUGINS_USER_CONFIG_DIR, mod.name + '.conf') - stock_config = os.path.join(PLUGINS_STOCK_CONFIG_DIR, mod.name + '.conf') - - Logger.debug("loading '{0}'".format(user_config)) - loaded_config, error = self.loader.load_config_from_file(user_config) - if error: - Logger.error("cannot load '{0}' : {1}. Will try stock version.".format(user_config, error)) - Logger.debug("loading '{0}'".format(stock_config)) - loaded_config, error = self.loader.load_config_from_file(stock_config) - - if error: - Logger.error("cannot load '{0}': {1}".format(stock_config, error)) - - # Skip disabled modules - if getattr(loaded_module, 'disabled_by_default', False) and not mod.explicitly_enabled: - Logger.info("module '{0}' disabled by default".format(loaded_module.__name__)) - continue - - # Module initialization --------------------------------------------------- - - initialized_module = Module(service=loaded_module, config=loaded_config) - Logger.debug("module status: '{module_name}' => [{status}] " - "(jobs: {jobs_number})".format(status='OK' if initialized_module else 'FAILED', - module_name=initialized_module.name, - jobs_number=len(initialized_module))) - if initialized_module: - self.modules[initialized_module.name] = initialized_module - - @staticmethod - def check_job(job): - """ - :param job: <Job> - :return: - """ - try: - check_ok = bool(job.check()) - except Exception as error: - job.error('check() unhandled exception: {error}'.format(error=error)) - return None - else: - return check_ok - - @staticmethod - def create_job_charts(job): - """ - :param job: <Job> - :return: - """ - try: - create_ok = job.create() - except Exception as error: - job.error('create() unhandled exception: {error}'.format(error=error)) - return False - else: - return create_ok - - def delete_job(self, job): - """ - :param job: <Job> - :return: - """ - del self.modules[job.module_name][job.id] - - def run_check(self): - checked = list() - for job in self.jobs: - if job.name in checked: - job.info('check() => [DROPPED] (already served by another job)') - self.delete_job(job) - continue - ok = self.check_job(job) - if ok: - job.info('check() => [OK]') - checked.append(job.name) - job.checked = True - continue - if not job.is_autodetect() or ok is None: - job.info('check() => [FAILED]') - self.delete_job(job) - else: - job.info('check() => [RECHECK] (autodetection_retry: {0})'.format(job.recheck_every)) - - def run_create(self): - for job in self.jobs: - if not job.checked: - # skip autodetection_retry jobs - continue - ok = self.create_job_charts(job) - if ok: - job.debug('create() => [OK] (charts: {0})'.format(len(job.charts))) - job.created = True - continue - job.error('create() => [FAILED] (charts: {0})'.format(len(job.charts))) - self.delete_job(job) - - def start(self): - self.run_check() - self.run_create() - for job in self.jobs: - if job.created: - job.start() - - while True: - if threading.active_count() <= 1 and not self.autodetect_jobs: - run_and_exit(Logger.info)('FINISHED') - - sleep(self.sleep_time) - self.cleanup() - self.autodetect_retry() - - # FIXME: https://github.com/netdata/netdata/issues/3817 - if self.do_gc and self.runs_counter % self.gc_interval == 0: - v = gc.collect() - Logger.debug("GC full collection run result: {0}".format(v)) - - def cleanup(self): - for job in self.dead_jobs: - self.delete_job(job) - for mod in self: - if not mod: - del self.modules[mod.name] - - def autodetect_retry(self): - self.runs_counter += self.sleep_time - for job in self.autodetect_jobs: - if self.runs_counter % job.recheck_every == 0: - checked = self.check_job(job) - if checked: - created = self.create_job_charts(job) - if not created: - self.delete_job(job) - continue - job.start() - - -if __name__ == '__main__': - DEBUG, TRACE, OVERRIDE_UPDATE_EVERY, MODULES_TO_RUN = parse_cmd() - Logger = PythonDLogger() - if DEBUG: - Logger.logger.severity = 'DEBUG' - if TRACE: - Logger.log_traceback = True - Logger.info('Using python {version}'.format(version=PY_VERSION[0])) - - plugin = Plugin() - plugin.start() diff --git a/collectors/python.d.plugin/python.d.plugin.in b/collectors/python.d.plugin/python.d.plugin.in index 8b55ad41..6521fed9 100755..100644 --- a/collectors/python.d.plugin/python.d.plugin.in +++ b/collectors/python.d.plugin/python.d.plugin.in @@ -48,15 +48,15 @@ except ImportError: from third_party.ordereddict import OrderedDict BASE_CONFIG = {'update_every': os.getenv('NETDATA_UPDATE_EVERY', 1), - 'retries': 60, 'priority': 60000, 'autodetection_retry': 0, 'chart_cleanup': 10, + 'penalty': True, 'name': str()} MODULE_EXTENSION = '.chart.py' -OBSOLETE_MODULES = ['apache_cache', 'gunicorn_log', 'nginx_log', 'cpufreq'] +OBSOLETE_MODULES = ['apache_cache', 'gunicorn_log', 'nginx_log', 'cpufreq', 'cpuidle', 'mdstat', 'linux_power_supply'] def module_ok(m): diff --git a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/MySQLService.py b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/MySQLService.py index 53807e2c..9a694aa8 100644 --- a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/MySQLService.py +++ b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/MySQLService.py @@ -131,20 +131,22 @@ class MySQLService(SimpleService): raw_data = dict() queries = dict(self.queries) try: - with self.__connection as cursor: - for name, query in queries.items(): - try: - cursor.execute(query) - except (MySQLdb.ProgrammingError, MySQLdb.OperationalError) as error: - if self.__is_error_critical(err_class=exc_info()[0], err_text=str(error)): - raise RuntimeError - self.error('Removed query: {name}[{query}]. Error: error'.format(name=name, - query=query, - error=error)) - self.queries.pop(name) - continue - else: - raw_data[name] = (cursor.fetchall(), cursor.description) if description else cursor.fetchall() + cursor = self.__connection.cursor() + for name, query in queries.items(): + try: + cursor.execute(query) + except (MySQLdb.ProgrammingError, MySQLdb.OperationalError) as error: + if self.__is_error_critical(err_class=exc_info()[0], err_text=str(error)): + cursor.close() + raise RuntimeError + self.error('Removed query: {name}[{query}]. Error: error'.format(name=name, + query=query, + error=error)) + self.queries.pop(name) + continue + else: + raw_data[name] = (cursor.fetchall(), cursor.description) if description else cursor.fetchall() + cursor.close() self.__connection.commit() except (MySQLdb.MySQLError, RuntimeError, TypeError, AttributeError): self.__connection.close() diff --git a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SimpleService.py b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SimpleService.py index dd53fbc1..c7ab7f24 100644 --- a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SimpleService.py +++ b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SimpleService.py @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-3.0-or-later from threading import Thread -from time import sleep +from time import sleep, time from third_party.monotonic import monotonic @@ -17,25 +17,42 @@ RUNTIME_CHART_UPDATE = 'BEGIN netdata.runtime_{job_name} {since_last}\n' \ 'SET run_time = {elapsed}\n' \ 'END\n' +PENALTY_EVERY = 5 +MAX_PENALTY = 10 * 60 # 10 minutes + class RuntimeCounters: def __init__(self, configuration): """ :param configuration: <dict> """ - self.FREQ = int(configuration.pop('update_every')) - self.START_RUN = 0 - self.NEXT_RUN = 0 - self.PREV_UPDATE = 0 - self.SINCE_UPDATE = 0 - self.ELAPSED = 0 - self.RETRIES = 0 - self.RETRIES_MAX = configuration.pop('retries') - self.PENALTY = 0 - self.RUNS = 1 + self.update_every = int(configuration.pop('update_every')) + self.do_penalty = configuration.pop('penalty') + + self.start_mono = 0 + self.start_real = 0 + self.retries = 0 + self.penalty = 0 + self.elapsed = 0 + self.prev_update = 0 + + self.runs = 1 - def is_sleep_time(self): - return self.START_RUN < self.NEXT_RUN + def calc_next(self): + self.start_mono = monotonic() + return self.start_mono - (self.start_mono % self.update_every) + self.update_every + self.penalty + + def sleep_until_next(self): + next_time = self.calc_next() + while self.start_mono < next_time: + sleep(next_time - self.start_mono) + self.start_mono = monotonic() + self.start_real = time() + + def handle_retries(self): + self.retries += 1 + if self.do_penalty and self.retries % PENALTY_EVERY == 0: + self.penalty = round(min(self.retries * self.update_every / 2, MAX_PENALTY)) class SimpleService(Thread, PythonDLimitedLogger, OldVersionCompatibility, object): @@ -83,11 +100,11 @@ class SimpleService(Thread, PythonDLimitedLogger, OldVersionCompatibility, objec @property def runs_counter(self): - return self._runtime_counters.RUNS + return self._runtime_counters.runs @property def update_every(self): - return self._runtime_counters.FREQ + return self._runtime_counters.update_every @update_every.setter def update_every(self, value): @@ -95,7 +112,7 @@ class SimpleService(Thread, PythonDLimitedLogger, OldVersionCompatibility, objec :param value: <int> :return: """ - self._runtime_counters.FREQ = value + self._runtime_counters.update_every = value def get_update_every(self): return self.update_every @@ -163,41 +180,36 @@ class SimpleService(Thread, PythonDLimitedLogger, OldVersionCompatibility, objec :return: None """ job = self._runtime_counters - self.debug('started, update frequency: {freq}, ' - 'retries: {retries}'.format(freq=job.FREQ, retries=job.RETRIES_MAX - job.RETRIES)) + self.debug('started, update frequency: {freq}'.format(freq=job.update_every)) while True: - job.START_RUN = monotonic() - - job.NEXT_RUN = job.START_RUN - (job.START_RUN % job.FREQ) + job.FREQ + job.PENALTY + job.sleep_until_next() - self.sleep_until_next_run() - - if job.PREV_UPDATE: - job.SINCE_UPDATE = int((job.START_RUN - job.PREV_UPDATE) * 1e6) + since = 0 + if job.prev_update: + since = int((job.start_real - job.prev_update) * 1e6) try: - updated = self.update(interval=job.SINCE_UPDATE) + updated = self.update(interval=since) except Exception as error: self.error('update() unhandled exception: {error}'.format(error=error)) updated = False - job.RUNS += 1 + job.runs += 1 if not updated: - if not self.manage_retries(): - return + job.handle_retries() else: - job.ELAPSED = int((monotonic() - job.START_RUN) * 1e3) - job.PREV_UPDATE = job.START_RUN - job.RETRIES, job.PENALTY = 0, 0 + job.elapsed = int((monotonic() - job.start_mono) * 1e3) + job.prev_update = job.start_real + job.retries, job.penalty = 0, 0 safe_print(RUNTIME_CHART_UPDATE.format(job_name=self.name, - since_last=job.SINCE_UPDATE, - elapsed=job.ELAPSED)) - self.debug('update => [{status}] (elapsed time: {elapsed}, ' - 'retries left: {retries})'.format(status='OK' if updated else 'FAILED', - elapsed=job.ELAPSED if updated else '-', - retries=job.RETRIES_MAX - job.RETRIES)) + since_last=since, + elapsed=job.elapsed)) + self.debug('update => [{status}] (elapsed time: {elapsed}, failed retries in a row: {retries})'.format( + status='OK' if updated else 'FAILED', + elapsed=job.elapsed if updated else '-', + retries=job.retries)) def update(self, interval): """ @@ -233,27 +245,6 @@ class SimpleService(Thread, PythonDLimitedLogger, OldVersionCompatibility, objec return updated - def manage_retries(self): - rc = self._runtime_counters - rc.RETRIES += 1 - if rc.RETRIES % 5 == 0: - rc.PENALTY = int(rc.RETRIES * self.update_every / 2) - if rc.RETRIES >= rc.RETRIES_MAX: - self.error('stopped after {0} data collection failures in a row'.format(rc.RETRIES_MAX)) - return False - return True - - def sleep_until_next_run(self): - job = self._runtime_counters - - # sleep() is interruptable - while job.is_sleep_time(): - sleep_time = job.NEXT_RUN - job.START_RUN - self.debug('sleeping for {sleep_time} to reach frequency of {freq} sec'.format(sleep_time=sleep_time, - freq=job.FREQ + job.PENALTY)) - sleep(sleep_time) - job.START_RUN = monotonic() - def get_data(self): return self._get_data() diff --git a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SocketService.py b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SocketService.py index e8545530..f5e6380b 100644 --- a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SocketService.py +++ b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/SocketService.py @@ -75,9 +75,11 @@ class SocketService(SimpleService): keyfile=self.key, certfile=self.cert, server_side=False, - cert_reqs=ssl.CERT_NONE) + cert_reqs=ssl.CERT_NONE, + ssl_version=ssl.PROTOCOL_TLS, + ) except (socket.error, ssl.SSLError) as error: - self.error('Failed to wrap socket.') + self.error('failed to wrap socket : {0}'.format(error)) self._disconnect() self.__socket_config = None return False @@ -169,8 +171,8 @@ class SocketService(SimpleService): self.debug('closing socket') self._sock.shutdown(2) # 0 - read, 1 - write, 2 - all self._sock.close() - except Exception: - pass + except Exception as error: + self.error(error) self._sock = None def _send(self, request=None): diff --git a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/UrlService.py b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/UrlService.py index 856f3885..011efff9 100644 --- a/collectors/python.d.plugin/python_modules/bases/FrameworkServices/UrlService.py +++ b/collectors/python.d.plugin/python_modules/bases/FrameworkServices/UrlService.py @@ -26,6 +26,7 @@ class UrlService(SimpleService): self.method = self.configuration.get('method', 'GET') self.header = self.configuration.get('header') self.request_timeout = self.configuration.get('timeout', 1) + self.respect_retry_after_header = self.configuration.get('respect_retry_after_header') self.tls_verify = self.configuration.get('tls_verify') self.tls_ca_file = self.configuration.get('tls_ca_file') self.tls_key_file = self.configuration.get('tls_key_file') @@ -111,12 +112,18 @@ class UrlService(SimpleService): """ url = url or self.url manager = manager or self._manager - response = manager.request(method=self.method, - url=url, - timeout=self.request_timeout, - retries=retries, - headers=manager.headers, - redirect=redirect) + retry = urllib3.Retry(retries) + if hasattr(retry, 'respect_retry_after_header'): + retry.respect_retry_after_header = bool(self.respect_retry_after_header) + + response = manager.request( + method=self.method, + url=url, + timeout=self.request_timeout, + retries=retry, + headers=manager.headers, + redirect=redirect, + ) if isinstance(response.data, str): return response.status, response.data return response.status, response.data.decode() diff --git a/collectors/python.d.plugin/python_modules/bases/charts.py b/collectors/python.d.plugin/python_modules/bases/charts.py index 2963739e..0a071905 100644 --- a/collectors/python.d.plugin/python_modules/bases/charts.py +++ b/collectors/python.d.plugin/python_modules/bases/charts.py @@ -45,7 +45,7 @@ def create_runtime_chart(func): ok = func(*args, **kwargs) if ok: safe_print(RUNTIME_CHART_CREATE.format(job_name=self.name, - update_every=self._runtime_counters.FREQ)) + update_every=self._runtime_counters.update_every)) return ok return wrapper diff --git a/collectors/python.d.plugin/python_modules/bases/loggers.py b/collectors/python.d.plugin/python_modules/bases/loggers.py index 39be77a7..098294d3 100644 --- a/collectors/python.d.plugin/python_modules/bases/loggers.py +++ b/collectors/python.d.plugin/python_modules/bases/loggers.py @@ -34,7 +34,7 @@ def limiter(log_max_count=30, allowed_in_seconds=60): def on_decorator(func): def on_call(*args): - current_time = args[0]._runtime_counters.START_RUN + current_time = args[0]._runtime_counters.start_mono lc = args[0]._logger_counters if lc.logged and lc.logged % log_max_count == 0: diff --git a/collectors/python.d.plugin/rabbitmq/README.md b/collectors/python.d.plugin/rabbitmq/README.md index 22d367c4..4ac60605 100644 --- a/collectors/python.d.plugin/rabbitmq/README.md +++ b/collectors/python.d.plugin/rabbitmq/README.md @@ -54,3 +54,5 @@ socket: When no configuration file is found, module tries to connect to: `localhost:15672`. --- + +[]() diff --git a/collectors/python.d.plugin/rabbitmq/rabbitmq.chart.py b/collectors/python.d.plugin/rabbitmq/rabbitmq.chart.py index 8298b403..a8f72592 100644 --- a/collectors/python.d.plugin/rabbitmq/rabbitmq.chart.py +++ b/collectors/python.d.plugin/rabbitmq/rabbitmq.chart.py @@ -3,23 +3,12 @@ # Author: l2isbad # SPDX-License-Identifier: GPL-3.0-or-later -from collections import namedtuple from json import loads -from socket import gethostbyname, gaierror -from threading import Thread -try: - from queue import Queue -except ImportError: - from Queue import Queue from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -update_every = 1 -priority = 60000 -retries = 60 - -METHODS = namedtuple('METHODS', ['get_data', 'url', 'stats']) +API_NODE = 'api/nodes' +API_OVERVIEW = 'api/overview' NODE_STATS = [ 'fd_used', @@ -64,15 +53,15 @@ CHARTS = { ] }, 'memory': { - 'options': [None, 'Memory', 'MB', 'overview', 'rabbitmq.memory', 'line'], + 'options': [None, 'Memory', 'MiB', 'overview', 'rabbitmq.memory', 'area'], 'lines': [ - ['mem_used', 'used', 'absolute', 1, 1024 << 10] + ['mem_used', 'used', 'absolute', 1, 1 << 20] ] }, 'disk_space': { - 'options': [None, 'Disk Space', 'GB', 'overview', 'rabbitmq.disk_space', 'line'], + 'options': [None, 'Disk Space', 'GiB', 'overview', 'rabbitmq.disk_space', 'area'], 'lines': [ - ['disk_free', 'free', 'absolute', 1, 1024 ** 3] + ['disk_free', 'free', 'absolute', 1, 1 << 30] ] }, 'socket_descriptors': { @@ -111,7 +100,7 @@ CHARTS = { ] }, 'message_rates': { - 'options': [None, 'Message Rates', 'messages/s', 'overview', 'rabbitmq.message_rates', 'stacked'], + 'options': [None, 'Message Rates', 'messages/s', 'overview', 'rabbitmq.message_rates', 'line'], 'lines': [ ['message_stats_ack', 'ack', 'incremental'], ['message_stats_redeliver', 'redeliver', 'incremental'], @@ -127,74 +116,62 @@ class Service(UrlService): UrlService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = CHARTS - self.host = self.configuration.get('host', '127.0.0.1') - self.port = self.configuration.get('port', 15672) - self.scheme = self.configuration.get('scheme', 'http') + self.url = '{0}://{1}:{2}'.format( + configuration.get('scheme', 'http'), + configuration.get('host', '127.0.0.1'), + configuration.get('port', 15672), + ) + self.node_name = str() - def check(self): - # We can't start if <host> AND <port> not specified - if not (self.host and self.port): - self.error('Host is not defined in the module configuration file') - return False + def _get_data(self): + data = dict() - # Hostname -> ip address - try: - self.host = gethostbyname(self.host) - except gaierror as error: - self.error(str(error)) - return False - - # Add handlers (auth, self signed cert accept) - self.url = '{scheme}://{host}:{port}/api'.format(scheme=self.scheme, - host=self.host, - port=self.port) - # Add methods - api_node = self.url + '/nodes' - api_overview = self.url + '/overview' - self.methods = [METHODS(get_data=self._get_overview_stats, - url=api_node, - stats=NODE_STATS), - METHODS(get_data=self._get_overview_stats, - url=api_overview, - stats=OVERVIEW_STATS)] - return UrlService.check(self) + stats = self.get_overview_stats() - def _get_data(self): - threads = list() - queue = Queue() - result = dict() + if not stats: + return None + + data.update(stats) + + stats = self.get_nodes_stats() + + if not stats: + return None + + data.update(stats) - for method in self.methods: - th = Thread(target=method.get_data, - args=(queue, method.url, method.stats)) - th.start() - threads.append(th) + return data or None - for thread in threads: - thread.join() - result.update(queue.get()) + def get_overview_stats(self): + url = '{0}/{1}'.format(self.url, API_OVERVIEW) - return result or None + raw = self._get_raw_data(url) - def _get_overview_stats(self, queue, url, stats): - """ - Format data received from http request - :return: dict - """ + if not raw: + return None - raw_data = self._get_raw_data(url) + data = loads(raw) - if not raw_data: - return queue.put(dict()) - data = loads(raw_data) - data = data[0] if isinstance(data, list) else data + self.node_name = data['node'] - to_netdata = fetch_data(raw_data=data, metrics=stats) - return queue.put(to_netdata) + return fetch_data(raw_data=data, metrics=OVERVIEW_STATS) + + def get_nodes_stats(self): + url = '{0}/{1}/{2}'.format(self.url, API_NODE, self.node_name) + + raw = self._get_raw_data(url) + + if not raw: + return None + + data = loads(raw) + + return fetch_data(raw_data=data, metrics=NODE_STATS) def fetch_data(raw_data, metrics): data = dict() + for metric in metrics: value = raw_data metrics_list = metric.split('.') @@ -204,4 +181,5 @@ def fetch_data(raw_data, metrics): except KeyError: continue data['_'.join(metrics_list)] = value + return data diff --git a/collectors/python.d.plugin/rabbitmq/rabbitmq.conf b/collectors/python.d.plugin/rabbitmq/rabbitmq.conf index 3f90da8a..ae0dbdb7 100644 --- a/collectors/python.d.plugin/rabbitmq/rabbitmq.conf +++ b/collectors/python.d.plugin/rabbitmq/rabbitmq.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, rabbitmq plugin also supports the following: diff --git a/collectors/python.d.plugin/redis/README.md b/collectors/python.d.plugin/redis/README.md index 8d21df0c..0bea0376 100644 --- a/collectors/python.d.plugin/redis/README.md +++ b/collectors/python.d.plugin/redis/README.md @@ -40,3 +40,5 @@ localhost: When no configuration file is found, module tries to connect to TCP/IP socket: `localhost:6379`. --- + +[]() diff --git a/collectors/python.d.plugin/redis/redis.chart.py b/collectors/python.d.plugin/redis/redis.chart.py index 37d55ebf..9dbb2c16 100644 --- a/collectors/python.d.plugin/redis/redis.chart.py +++ b/collectors/python.d.plugin/redis/redis.chart.py @@ -47,13 +47,13 @@ CHARTS = { ] }, 'hit_rate': { - 'options': [None, 'Hit rate', 'percent', 'hits', 'redis.hit_rate', 'line'], + 'options': [None, 'Hit rate', 'percentage', 'hits', 'redis.hit_rate', 'line'], 'lines': [ ['hit_rate', 'rate', 'absolute'] ] }, 'memory': { - 'options': [None, 'Memory utilization', 'kilobytes', 'memory', 'redis.memory', 'line'], + 'options': [None, 'Memory utilization', 'KiB', 'memory', 'redis.memory', 'line'], 'lines': [ ['used_memory', 'total', 'absolute', 1, 1024], ['used_memory_lua', 'lua', 'absolute', 1, 1024] @@ -62,8 +62,8 @@ CHARTS = { 'net': { 'options': [None, 'Bandwidth', 'kilobits/s', 'network', 'redis.net', 'area'], 'lines': [ - ['total_net_input_bytes', 'in', 'incremental', 8, 1024], - ['total_net_output_bytes', 'out', 'incremental', -8, 1024] + ['total_net_input_bytes', 'in', 'incremental', 8, 1000], + ['total_net_output_bytes', 'out', 'incremental', -8, 1000] ] }, 'keys_redis': { @@ -146,16 +146,13 @@ RE = re.compile(r'\n([a-z_0-9 ]+):(?:keys=)?([^,\r]+)') class Service(SocketService): def __init__(self, configuration=None, name=None): SocketService.__init__(self, configuration=configuration, name=name) - self._keep_alive = True - self.order = list() self.definitions = dict() - + self._keep_alive = True self.host = self.configuration.get('host', 'localhost') self.port = self.configuration.get('port', 6379) self.unix_socket = self.configuration.get('socket') p = self.configuration.get('pass') - self.auth_request = 'AUTH {0} \r\n'.format(p).encode() if p else None self.request = 'INFO\r\n'.encode() self.bgsave_time = 0 diff --git a/collectors/python.d.plugin/redis/redis.conf b/collectors/python.d.plugin/redis/redis.conf index 6363f6da..b456d75d 100644 --- a/collectors/python.d.plugin/redis/redis.conf +++ b/collectors/python.d.plugin/redis/redis.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, redis also supports the following: diff --git a/collectors/python.d.plugin/rethinkdbs/README.md b/collectors/python.d.plugin/rethinkdbs/README.md index 5d357fa4..183c7f73 100644 --- a/collectors/python.d.plugin/rethinkdbs/README.md +++ b/collectors/python.d.plugin/rethinkdbs/README.md @@ -32,3 +32,5 @@ localhost: When no configuration file is found, module tries to connect to `127.0.0.1:28015`. --- + +[]() diff --git a/collectors/python.d.plugin/rethinkdbs/rethinkdbs.chart.py b/collectors/python.d.plugin/rethinkdbs/rethinkdbs.chart.py index 127e9ad4..da2f26f4 100644 --- a/collectors/python.d.plugin/rethinkdbs/rethinkdbs.chart.py +++ b/collectors/python.d.plugin/rethinkdbs/rethinkdbs.chart.py @@ -136,13 +136,11 @@ class Service(SimpleService): SimpleService.__init__(self, configuration=configuration, name=name) self.order = list(ORDER) self.definitions = cluster_charts() - self.host = self.configuration.get('host', '127.0.0.1') self.port = self.configuration.get('port', 28015) self.user = self.configuration.get('user', 'admin') self.password = self.configuration.get('password') self.timeout = self.configuration.get('timeout', 2) - self.conn = None self.alive = True diff --git a/collectors/python.d.plugin/rethinkdbs/rethinkdbs.conf b/collectors/python.d.plugin/rethinkdbs/rethinkdbs.conf index 73544fc2..d671acbb 100644 --- a/collectors/python.d.plugin/rethinkdbs/rethinkdbs.conf +++ b/collectors/python.d.plugin/rethinkdbs/rethinkdbs.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, rethinkdb also supports the following: diff --git a/collectors/python.d.plugin/retroshare/README.md b/collectors/python.d.plugin/retroshare/README.md index e95095c6..a8a58880 100644 --- a/collectors/python.d.plugin/retroshare/README.md +++ b/collectors/python.d.plugin/retroshare/README.md @@ -1 +1,3 @@ # retroshare + +[]() diff --git a/collectors/python.d.plugin/retroshare/retroshare.chart.py b/collectors/python.d.plugin/retroshare/retroshare.chart.py index 1d8e3505..feb871fb 100644 --- a/collectors/python.d.plugin/retroshare/retroshare.chart.py +++ b/collectors/python.d.plugin/retroshare/retroshare.chart.py @@ -7,26 +7,25 @@ import json from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['bandwidth', 'peers', 'dht'] +ORDER = [ + 'bandwidth', + 'peers', + 'dht', +] CHARTS = { 'bandwidth': { - 'options': [None, 'RetroShare Bandwidth', 'kB/s', 'RetroShare', 'retroshare.bandwidth', 'area'], + 'options': [None, 'RetroShare Bandwidth', 'kilobits/s', 'RetroShare', 'retroshare.bandwidth', 'area'], 'lines': [ - ['bandwidth_up_kb', 'Upload'], + ['bandwidth_up_kb', 'Upload'], ['bandwidth_down_kb', 'Download'] ] }, 'peers': { 'options': [None, 'RetroShare Peers', 'peers', 'RetroShare', 'retroshare.peers', 'line'], 'lines': [ - ['peers_all', 'All friends'], + ['peers_all', 'All friends'], ['peers_connected', 'Connected friends'] ] }, @@ -34,7 +33,7 @@ CHARTS = { 'options': [None, 'Retroshare DHT', 'peers', 'RetroShare', 'retroshare.dht', 'line'], 'lines': [ ['dht_size_all', 'DHT nodes estimated'], - ['dht_size_rs', 'RS nodes estimated'] + ['dht_size_rs', 'RS nodes estimated'] ] } } @@ -43,9 +42,9 @@ CHARTS = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - self.baseurl = self.configuration.get('url', 'http://localhost:9090') self.order = ORDER self.definitions = CHARTS + self.baseurl = self.configuration.get('url', 'http://localhost:9090') def _get_stats(self): """ diff --git a/collectors/python.d.plugin/retroshare/retroshare.conf b/collectors/python.d.plugin/retroshare/retroshare.conf index 9c92583f..3d0af538 100644 --- a/collectors/python.d.plugin/retroshare/retroshare.conf +++ b/collectors/python.d.plugin/retroshare/retroshare.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, RetroShare also supports the following: diff --git a/collectors/python.d.plugin/samba/README.md b/collectors/python.d.plugin/samba/README.md index 44610d37..97f2e3d3 100644 --- a/collectors/python.d.plugin/samba/README.md +++ b/collectors/python.d.plugin/samba/README.md @@ -65,3 +65,5 @@ samba: yes ``` --- + +[]() diff --git a/collectors/python.d.plugin/samba/samba.chart.py b/collectors/python.d.plugin/samba/samba.chart.py index b2278de9..ac89c29b 100644 --- a/collectors/python.d.plugin/samba/samba.chart.py +++ b/collectors/python.d.plugin/samba/samba.chart.py @@ -24,10 +24,7 @@ from bases.FrameworkServices.ExecutableService import ExecutableService disabled_by_default = True -# default module values (can be overridden per job in `config`) update_every = 5 -priority = 60000 -retries = 60 ORDER = [ 'syscall_rw', @@ -41,14 +38,14 @@ ORDER = [ CHARTS = { 'syscall_rw': { - 'options': [None, 'R/Ws', 'kilobytes/s', 'syscall', 'syscall.rw', 'area'], + 'options': [None, 'R/Ws', 'KiB/s', 'syscall', 'syscall.rw', 'area'], 'lines': [ ['syscall_sendfile_bytes', 'sendfile', 'incremental', 1, 1024], ['syscall_recvfile_bytes', 'recvfile', 'incremental', -1, 1024] ] }, 'smb2_rw': { - 'options': [None, 'R/Ws', 'kilobytes/s', 'smb2', 'smb2.rw', 'area'], + 'options': [None, 'R/Ws', 'KiB/s', 'smb2', 'smb2.rw', 'area'], 'lines': [ ['smb2_read_outbytes', 'readout', 'incremental', 1, 1024], ['smb2_write_inbytes', 'writein', 'incremental', -1, 1024], diff --git a/collectors/python.d.plugin/samba/samba.conf b/collectors/python.d.plugin/samba/samba.conf index ee513c60..db15d4e9 100644 --- a/collectors/python.d.plugin/samba/samba.conf +++ b/collectors/python.d.plugin/samba/samba.conf @@ -27,11 +27,9 @@ update_every: 5 # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,5 +56,5 @@ update_every: 5 # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds
\ No newline at end of file diff --git a/collectors/python.d.plugin/sensors/README.md b/collectors/python.d.plugin/sensors/README.md index eb1642d9..e3f956f1 100644 --- a/collectors/python.d.plugin/sensors/README.md +++ b/collectors/python.d.plugin/sensors/README.md @@ -15,3 +15,5 @@ We are tracking such cases in issue [#827](https://github.com/netdata/netdata/is Please join this discussion for help. --- + +[]() diff --git a/collectors/python.d.plugin/sensors/sensors.chart.py b/collectors/python.d.plugin/sensors/sensors.chart.py index d70af3b0..e622eb8e 100644 --- a/collectors/python.d.plugin/sensors/sensors.chart.py +++ b/collectors/python.d.plugin/sensors/sensors.chart.py @@ -7,8 +7,6 @@ from third_party import lm_sensors as sensors from bases.FrameworkServices.SimpleService import SimpleService -# default module values (can be overridden per job in `config`) -# update_every = 2 ORDER = [ 'temperature', @@ -139,7 +137,7 @@ class Service(SimpleService): except sensors.SensorsError as error: self.error('{0}: {1}'.format(sf.name, error)) continue - if not vals or vals[0] == 0: + if not vals or (vals[0] == 0 and feature.type != 1): continue if TYPE_MAP[feature.type] == sensor: # create chart diff --git a/collectors/python.d.plugin/sensors/sensors.conf b/collectors/python.d.plugin/sensors/sensors.conf index 83bbffd7..d3369ba6 100644 --- a/collectors/python.d.plugin/sensors/sensors.conf +++ b/collectors/python.d.plugin/sensors/sensors.conf @@ -19,11 +19,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. diff --git a/collectors/python.d.plugin/smartd_log/README.md b/collectors/python.d.plugin/smartd_log/README.md index a31ad0c7..3b0816fb 100644 --- a/collectors/python.d.plugin/smartd_log/README.md +++ b/collectors/python.d.plugin/smartd_log/README.md @@ -99,3 +99,5 @@ local: If no configuration is given, module will attempt to read log files in `/var/log/smartd/` directory. --- + +[]() diff --git a/collectors/python.d.plugin/smartd_log/smartd_log.chart.py b/collectors/python.d.plugin/smartd_log/smartd_log.chart.py index 13762fab..871025a4 100644 --- a/collectors/python.d.plugin/smartd_log/smartd_log.chart.py +++ b/collectors/python.d.plugin/smartd_log/smartd_log.chart.py @@ -268,7 +268,7 @@ CHARTS = { 'algo': INCREMENTAL, }, 'reserved_block_count': { - 'options': [None, 'Reserved Block Count', '%', 'wear', 'smartd_log.reserved_block_count', 'line'], + 'options': [None, 'Reserved Block Count', 'percentage', 'wear', 'smartd_log.reserved_block_count', 'line'], 'lines': [], 'attrs': [ATTR170], 'algo': ABSOLUTE, @@ -321,7 +321,7 @@ CHARTS = { }, 'percent_lifetime_used': { - 'options': [None, 'Percent Lifetime Used', '%', 'wear', 'smartd_log.percent_lifetime_used', 'line'], + 'options': [None, 'Percent Lifetime Used', 'percentage', 'wear', 'smartd_log.percent_lifetime_used', 'line'], 'lines': [], 'attrs': [ATTR202], 'algo': ABSOLUTE, @@ -453,6 +453,11 @@ class Ata190(BaseAtaSmartAttribute): return 100 - int(self.normalized_value) +class Ata194(BaseAtaSmartAttribute): + def value(self): + return min(int(self.normalized_value), int(self.raw_value)) + + class BaseSCSISmartAttribute: def __init__(self, name, raw_value): self.name = name @@ -474,10 +479,11 @@ def ata_attribute_factory(value): return Ata9(*value) elif name == ATTR190: return Ata190(*value) + elif name == ATTR194: + return Ata194(*value) elif name in [ ATTR1, ATTR7, - ATTR194, ATTR202, ATTR206, ]: @@ -580,11 +586,9 @@ class Service(SimpleService): SimpleService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = deepcopy(CHARTS) - self.log_path = configuration.get('log_path', DEF_PATH) self.age = configuration.get('age', DEF_AGE) self.exclude = configuration.get('exclude_disks', str()).split() - self.disks = list() self.runs = 0 @@ -646,6 +650,10 @@ class Service(SimpleService): return len(self.disks) def create_disk_from_file(self, full_name, current_time): + if not full_name.endswith(CSV): + self.debug('skipping {0}: not a csv file'.format(full_name)) + return None + name = os.path.basename(full_name).split('.')[-3] path = os.path.join(self.log_path, full_name) @@ -655,10 +663,6 @@ class Service(SimpleService): if [p for p in self.exclude if p in name]: return None - if not full_name.endswith(CSV): - self.debug('skipping {0}: not a csv file'.format(full_name)) - return None - if not os.access(path, os.R_OK): self.debug('skipping {0}: not readable'.format(full_name)) return None diff --git a/collectors/python.d.plugin/smartd_log/smartd_log.conf b/collectors/python.d.plugin/smartd_log/smartd_log.conf index ab7f45b0..4f138d17 100644 --- a/collectors/python.d.plugin/smartd_log/smartd_log.conf +++ b/collectors/python.d.plugin/smartd_log/smartd_log.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, smartd_log also supports the following: diff --git a/collectors/python.d.plugin/spigotmc/README.md b/collectors/python.d.plugin/spigotmc/README.md index ae560258..c3893055 100644 --- a/collectors/python.d.plugin/spigotmc/README.md +++ b/collectors/python.d.plugin/spigotmc/README.md @@ -20,3 +20,5 @@ password: pass By default, a connection to port 25575 on the local system is attempted with an empty password. --- + +[]() diff --git a/collectors/python.d.plugin/spigotmc/spigotmc.chart.py b/collectors/python.d.plugin/spigotmc/spigotmc.chart.py index a5e5ee0e..09674f5c 100644 --- a/collectors/python.d.plugin/spigotmc/spigotmc.chart.py +++ b/collectors/python.d.plugin/spigotmc/spigotmc.chart.py @@ -16,7 +16,10 @@ update_every = 5 PRECISION = 100 -ORDER = ['tps', 'users'] +ORDER = [ + 'tps', + 'users', +] CHARTS = { 'tps': { diff --git a/collectors/python.d.plugin/spigotmc/spigotmc.conf b/collectors/python.d.plugin/spigotmc/spigotmc.conf index 3ba492de..ccb5e263 100644 --- a/collectors/python.d.plugin/spigotmc/spigotmc.conf +++ b/collectors/python.d.plugin/spigotmc/spigotmc.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # In addition to the above, spigotmc supports the following: diff --git a/collectors/python.d.plugin/springboot/README.md b/collectors/python.d.plugin/springboot/README.md index a1817cc2..b5b776dd 100644 --- a/collectors/python.d.plugin/springboot/README.md +++ b/collectors/python.d.plugin/springboot/README.md @@ -120,3 +120,5 @@ You can disable the default charts by set `defaults.<chart-id>: false`. The dimension name of extras charts should replace `.` to `_`. Please check [springboot.conf](springboot.conf) for more examples. + +[]() diff --git a/collectors/python.d.plugin/springboot/springboot.chart.py b/collectors/python.d.plugin/springboot/springboot.chart.py index 7df37e1d..eec870eb 100644 --- a/collectors/python.d.plugin/springboot/springboot.chart.py +++ b/collectors/python.d.plugin/springboot/springboot.chart.py @@ -6,13 +6,14 @@ import json from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 - -DEFAULT_ORDER = ['response_code', 'threads', 'gc_time', 'gc_ope', 'heap'] +DEFAULT_ORDER = [ + 'response_code', + 'threads', + 'gc_time', + 'gc_ope', + 'heap', +] DEFAULT_CHARTS = { 'response_code': { @@ -60,7 +61,7 @@ DEFAULT_CHARTS = { ] }, 'heap': { - 'options': [None, "Heap Memory Usage", "KB", "heap memory", "springboot.heap", "area"], + 'options': [None, "Heap Memory Usage", "KiB", "heap memory", "springboot.heap", "area"], 'lines': [ ["heap_committed", 'committed', "absolute"], ["heap_used", 'used', "absolute"], diff --git a/collectors/python.d.plugin/springboot/springboot.conf b/collectors/python.d.plugin/springboot/springboot.conf index 40b5fb43..13a39895 100644 --- a/collectors/python.d.plugin/springboot/springboot.conf +++ b/collectors/python.d.plugin/springboot/springboot.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -53,7 +51,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, this plugin also supports the following: diff --git a/collectors/python.d.plugin/squid/README.md b/collectors/python.d.plugin/squid/README.md index 9c9b62f2..b278f419 100644 --- a/collectors/python.d.plugin/squid/README.md +++ b/collectors/python.d.plugin/squid/README.md @@ -36,3 +36,5 @@ local: Without any configuration module will try to autodetect where squid presents its `counters` data --- + +[]() diff --git a/collectors/python.d.plugin/squid/squid.chart.py b/collectors/python.d.plugin/squid/squid.chart.py index fd54168f..c00556b5 100644 --- a/collectors/python.d.plugin/squid/squid.chart.py +++ b/collectors/python.d.plugin/squid/squid.chart.py @@ -6,13 +6,12 @@ from bases.FrameworkServices.SocketService import SocketService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 - -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['clients_net', 'clients_requests', 'servers_net', 'servers_requests'] +ORDER = [ + 'clients_net', + 'clients_requests', + 'servers_net', + 'servers_requests', +] CHARTS = { 'clients_net': { diff --git a/collectors/python.d.plugin/squid/squid.conf b/collectors/python.d.plugin/squid/squid.conf index 564187f0..b90a52c0 100644 --- a/collectors/python.d.plugin/squid/squid.conf +++ b/collectors/python.d.plugin/squid/squid.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, squid also supports the following: diff --git a/collectors/python.d.plugin/tomcat/README.md b/collectors/python.d.plugin/tomcat/README.md index e548bd33..21e3896a 100644 --- a/collectors/python.d.plugin/tomcat/README.md +++ b/collectors/python.d.plugin/tomcat/README.md @@ -31,3 +31,5 @@ Without configuration, module attempts to connect to `http://localhost:8080/mana So it will probably fail. --- + +[]() diff --git a/collectors/python.d.plugin/tomcat/tomcat.chart.py b/collectors/python.d.plugin/tomcat/tomcat.chart.py index 3c2d0ed4..01578c56 100644 --- a/collectors/python.d.plugin/tomcat/tomcat.chart.py +++ b/collectors/python.d.plugin/tomcat/tomcat.chart.py @@ -8,13 +8,18 @@ import xml.etree.ElementTree as ET from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 +MiB = 1 << 20 -# charts order (can be overridden if you want less charts, or different order) -ORDER = ['accesses', 'bandwidth', 'processing_time', 'threads', 'jvm', 'jvm_eden', 'jvm_survivor', 'jvm_tenured'] +ORDER = [ + 'accesses', + 'bandwidth', + 'processing_time', + 'threads', + 'jvm', + 'jvm_eden', + 'jvm_survivor', + 'jvm_tenured', +] CHARTS = { 'accesses': { @@ -25,7 +30,7 @@ CHARTS = { ] }, 'bandwidth': { - 'options': [None, 'Bandwidth', 'KB/s', 'statistics', 'tomcat.bandwidth', 'area'], + 'options': [None, 'Bandwidth', 'KiB/s', 'statistics', 'tomcat.bandwidth', 'area'], 'lines': [ ['bytesSent', 'sent', 'incremental', 1, 1024], ['bytesReceived', 'received', 'incremental', 1, 1024], @@ -45,39 +50,39 @@ CHARTS = { ] }, 'jvm': { - 'options': [None, 'JVM Memory Pool Usage', 'MB', 'memory', 'tomcat.jvm', 'stacked'], + 'options': [None, 'JVM Memory Pool Usage', 'MiB', 'memory', 'tomcat.jvm', 'stacked'], 'lines': [ - ['free', 'free', 'absolute', 1, 1048576], - ['eden_used', 'eden', 'absolute', 1, 1048576], - ['survivor_used', 'survivor', 'absolute', 1, 1048576], - ['tenured_used', 'tenured', 'absolute', 1, 1048576], - ['code_cache_used', 'code cache', 'absolute', 1, 1048576], - ['compressed_used', 'compressed', 'absolute', 1, 1048576], - ['metaspace_used', 'metaspace', 'absolute', 1, 1048576], + ['free', 'free', 'absolute', 1, MiB], + ['eden_used', 'eden', 'absolute', 1, MiB], + ['survivor_used', 'survivor', 'absolute', 1, MiB], + ['tenured_used', 'tenured', 'absolute', 1, MiB], + ['code_cache_used', 'code cache', 'absolute', 1, MiB], + ['compressed_used', 'compressed', 'absolute', 1, MiB], + ['metaspace_used', 'metaspace', 'absolute', 1, MiB], ] }, 'jvm_eden': { - 'options': [None, 'Eden Memory Usage', 'MB', 'memory', 'tomcat.jvm_eden', 'area'], + 'options': [None, 'Eden Memory Usage', 'MiB', 'memory', 'tomcat.jvm_eden', 'area'], 'lines': [ - ['eden_used', 'used', 'absolute', 1, 1048576], - ['eden_committed', 'committed', 'absolute', 1, 1048576], - ['eden_max', 'max', 'absolute', 1, 1048576] + ['eden_used', 'used', 'absolute', 1, MiB], + ['eden_committed', 'committed', 'absolute', 1, MiB], + ['eden_max', 'max', 'absolute', 1, MiB] ] }, 'jvm_survivor': { - 'options': [None, 'Survivor Memory Usage', 'MB', 'memory', 'tomcat.jvm_survivor', 'area'], + 'options': [None, 'Survivor Memory Usage', 'MiB', 'memory', 'tomcat.jvm_survivor', 'area'], 'lines': [ - ['survivor_used', 'used', 'absolute', 1, 1048576], - ['survivor_committed', 'committed', 'absolute', 1, 1048576], - ['survivor_max', 'max', 'absolute', 1, 1048576] + ['survivor_used', 'used', 'absolute', 1, MiB], + ['survivor_committed', 'committed', 'absolute', 1, MiB], + ['survivor_max', 'max', 'absolute', 1, MiB], ] }, 'jvm_tenured': { - 'options': [None, 'Tenured Memory Usage', 'MB', 'memory', 'tomcat.jvm_tenured', 'area'], + 'options': [None, 'Tenured Memory Usage', 'MiB', 'memory', 'tomcat.jvm_tenured', 'area'], 'lines': [ - ['tenured_used', 'used', 'absolute', 1, 1048576], - ['tenured_committed', 'committed', 'absolute', 1, 1048576], - ['tenured_max', 'max', 'absolute', 1, 1048576] + ['tenured_used', 'used', 'absolute', 1, MiB], + ['tenured_committed', 'committed', 'absolute', 1, MiB], + ['tenured_max', 'max', 'absolute', 1, MiB] ] } } @@ -86,10 +91,10 @@ CHARTS = { class Service(UrlService): def __init__(self, configuration=None, name=None): UrlService.__init__(self, configuration=configuration, name=name) - self.url = self.configuration.get('url', 'http://127.0.0.1:8080/manager/status?XML=true') - self.connector_name = self.configuration.get('connector_name', None) self.order = ORDER self.definitions = CHARTS + self.url = self.configuration.get('url', 'http://127.0.0.1:8080/manager/status?XML=true') + self.connector_name = self.configuration.get('connector_name', None) def _get_data(self): """ diff --git a/collectors/python.d.plugin/tomcat/tomcat.conf b/collectors/python.d.plugin/tomcat/tomcat.conf index c63f06cf..009591bd 100644 --- a/collectors/python.d.plugin/tomcat/tomcat.conf +++ b/collectors/python.d.plugin/tomcat/tomcat.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, tomcat also supports the following: diff --git a/collectors/python.d.plugin/tor/README.md b/collectors/python.d.plugin/tor/README.md index 4a883373..2ce0f25f 100644 --- a/collectors/python.d.plugin/tor/README.md +++ b/collectors/python.d.plugin/tor/README.md @@ -44,3 +44,5 @@ For more options please read the manual. Without configuration, module attempts to connect to `127.0.0.1:9051`. --- + +[]() diff --git a/collectors/python.d.plugin/tor/tor.chart.py b/collectors/python.d.plugin/tor/tor.chart.py index b77632bd..dd61e6e9 100644 --- a/collectors/python.d.plugin/tor/tor.chart.py +++ b/collectors/python.d.plugin/tor/tor.chart.py @@ -24,7 +24,7 @@ ORDER = [ CHARTS = { 'traffic': { - 'options': [None, 'Tor Traffic', 'KB/s', 'traffic', 'tor.traffic', 'area'], + 'options': [None, 'Tor Traffic', 'KiB/s', 'traffic', 'tor.traffic', 'area'], 'lines': [ ['read', 'read', 'incremental', 1, 1024], ['write', 'write', 'incremental', 1, -1024], @@ -39,10 +39,8 @@ class Service(SimpleService): super(Service, self).__init__(configuration=configuration, name=name) self.order = ORDER self.definitions = CHARTS - self.port = self.configuration.get('control_port', DEF_PORT) self.password = self.configuration.get('password') - self.use_socket = isinstance(self.port, str) and self.port != DEF_PORT and not self.port.isdigit() self.conn = None self.alive = False diff --git a/collectors/python.d.plugin/tor/tor.conf b/collectors/python.d.plugin/tor/tor.conf index 8245414f..91b517a6 100644 --- a/collectors/python.d.plugin/tor/tor.conf +++ b/collectors/python.d.plugin/tor/tor.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 10 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, tor plugin also supports the following: diff --git a/collectors/python.d.plugin/traefik/README.md b/collectors/python.d.plugin/traefik/README.md index 9b4a1820..61e0fdb7 100644 --- a/collectors/python.d.plugin/traefik/README.md +++ b/collectors/python.d.plugin/traefik/README.md @@ -46,9 +46,10 @@ priority : 60000 local: url : 'http://localhost:8080/health' - retries : 10 ``` Without configuration, module attempts to connect to `http://localhost:8080/health`. --- + +[]() diff --git a/collectors/python.d.plugin/traefik/traefik.chart.py b/collectors/python.d.plugin/traefik/traefik.chart.py index dc893322..570339d0 100644 --- a/collectors/python.d.plugin/traefik/traefik.chart.py +++ b/collectors/python.d.plugin/traefik/traefik.chart.py @@ -3,16 +3,13 @@ # Author: Alexandre Menezes (@ale_menezes) # SPDX-License-Identifier: GPL-3.0-or-later -from json import loads from collections import defaultdict + +from json import loads + from bases.FrameworkServices.UrlService import UrlService -# default module values (can be overridden per job in `config`) -update_every = 1 -priority = 60000 -retries = 10 -# charts order (can be overridden if you want less charts, or different order) ORDER = [ 'response_statuses', 'response_codes', @@ -99,14 +96,22 @@ class Service(UrlService): self.url = self.configuration.get('url', 'http://localhost:8080/health') self.order = ORDER self.definitions = CHARTS - self.data = { - 'successful_requests': 0, 'redirects': 0, 'bad_requests': 0, - 'server_errors': 0, 'other_requests': 0, '1xx': 0, '2xx': 0, - '3xx': 0, '4xx': 0, '5xx': 0, 'other': 0, - 'average_response_time_per_iteration_sec': 0 - } self.last_total_response_time = 0 self.last_total_count = 0 + self.data = { + 'successful_requests': 0, + 'redirects': 0, + 'bad_requests': 0, + 'server_errors': 0, + 'other_requests': 0, + '1xx': 0, + '2xx': 0, + '3xx': 0, + '4xx': 0, + '5xx': 0, + 'other': 0, + 'average_response_time_per_iteration_sec': 0, + } def _get_data(self): data = self._get_raw_data() diff --git a/collectors/python.d.plugin/traefik/traefik.conf b/collectors/python.d.plugin/traefik/traefik.conf index 909b9e54..e3f182d3 100644 --- a/collectors/python.d.plugin/traefik/traefik.conf +++ b/collectors/python.d.plugin/traefik/traefik.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 10 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, traefik plugin also supports the following: diff --git a/collectors/python.d.plugin/unbound/README.md b/collectors/python.d.plugin/unbound/README.md index 3b4fa16f..e213683c 100644 --- a/collectors/python.d.plugin/unbound/README.md +++ b/collectors/python.d.plugin/unbound/README.md @@ -74,3 +74,5 @@ While it's a bit more complicated to set up correctly, it is recommended that you use a UNIX socket as it provides far better performance. --- + +[]() diff --git a/collectors/python.d.plugin/unbound/unbound.chart.py b/collectors/python.d.plugin/unbound/unbound.chart.py index 52fcbf7e..adb58d41 100644 --- a/collectors/python.d.plugin/unbound/unbound.chart.py +++ b/collectors/python.d.plugin/unbound/unbound.chart.py @@ -13,7 +13,11 @@ from bases.loaders import YamlOrderedLoader PRECISION = 1000 -ORDER = ['queries', 'recursion', 'reqlist'] +ORDER = [ + 'queries', + 'recursion', + 'reqlist', +] CHARTS = { 'queries': { diff --git a/collectors/python.d.plugin/unbound/unbound.conf b/collectors/python.d.plugin/unbound/unbound.conf index 46c4b097..68561366 100644 --- a/collectors/python.d.plugin/unbound/unbound.conf +++ b/collectors/python.d.plugin/unbound/unbound.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_everye -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, unbound also supports the following: diff --git a/collectors/python.d.plugin/uwsgi/README.md b/collectors/python.d.plugin/uwsgi/README.md index a062710d..9d455cfc 100644 --- a/collectors/python.d.plugin/uwsgi/README.md +++ b/collectors/python.d.plugin/uwsgi/README.md @@ -35,3 +35,5 @@ localhost: ``` When no configuration file is found, module tries to connect to TCP/IP socket: `localhost:1717`. + +[]() diff --git a/collectors/python.d.plugin/uwsgi/uwsgi.chart.py b/collectors/python.d.plugin/uwsgi/uwsgi.chart.py index 5ebcfb55..511b770c 100644 --- a/collectors/python.d.plugin/uwsgi/uwsgi.chart.py +++ b/collectors/python.d.plugin/uwsgi/uwsgi.chart.py @@ -7,10 +7,6 @@ import json from copy import deepcopy from bases.FrameworkServices.SocketService import SocketService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 ORDER = [ 'requests', @@ -40,27 +36,27 @@ CHARTS = { ] }, 'tx': { - 'options': [None, 'Transmitted data', 'KB/s', 'requests', 'uwsgi.tx', 'stacked'], + 'options': [None, 'Transmitted data', 'KiB/s', 'requests', 'uwsgi.tx', 'stacked'], 'lines': [ ['tx', 'tx', 'incremental'] ] }, 'avg_rt': { - 'options': [None, 'Average request time', 'ms', 'requests', 'uwsgi.avg_rt', 'line'], + 'options': [None, 'Average request time', 'milliseconds', 'requests', 'uwsgi.avg_rt', 'line'], 'lines': [ ['avg_rt', 'avg_rt', 'absolute'] ] }, 'memory_rss': { - 'options': [None, 'RSS (Resident Set Size)', 'MB', 'memory', 'uwsgi.memory_rss', 'stacked'], + 'options': [None, 'RSS (Resident Set Size)', 'MiB', 'memory', 'uwsgi.memory_rss', 'stacked'], 'lines': [ - ['memory_rss', 'memory_rss', 'absolute', 1, 1024 * 1024] + ['memory_rss', 'memory_rss', 'absolute', 1, 1 << 20] ] }, 'memory_vsz': { - 'options': [None, 'VSZ (Virtual Memory Size)', 'MB', 'memory', 'uwsgi.memory_vsz', 'stacked'], + 'options': [None, 'VSZ (Virtual Memory Size)', 'MiB', 'memory', 'uwsgi.memory_vsz', 'stacked'], 'lines': [ - ['memory_vsz', 'memory_vsz', 'absolute', 1, 1024 * 1024] + ['memory_vsz', 'memory_vsz', 'absolute', 1, 1 << 20] ] }, 'exceptions': { @@ -87,15 +83,13 @@ CHARTS = { class Service(SocketService): def __init__(self, configuration=None, name=None): super(Service, self).__init__(configuration=configuration, name=name) - self.url = self.configuration.get('host', 'localhost') - self.port = self.configuration.get('port', 1717) self.order = ORDER self.definitions = deepcopy(CHARTS) - + self.url = self.configuration.get('host', 'localhost') + self.port = self.configuration.get('port', 1717) # Clear dynamic dimensions, these are added during `_get_data()` to allow adding workers at run-time for chart in DYNAMIC_CHARTS: self.definitions[chart]['lines'] = [] - self.last_result = {} self.workers = [] diff --git a/collectors/python.d.plugin/uwsgi/uwsgi.conf b/collectors/python.d.plugin/uwsgi/uwsgi.conf index be1c2ada..7d09e733 100644 --- a/collectors/python.d.plugin/uwsgi/uwsgi.conf +++ b/collectors/python.d.plugin/uwsgi/uwsgi.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, uwsgi also supports the following: diff --git a/collectors/python.d.plugin/varnish/README.md b/collectors/python.d.plugin/varnish/README.md index 96c7cafa..44d64efe 100644 --- a/collectors/python.d.plugin/varnish/README.md +++ b/collectors/python.d.plugin/varnish/README.md @@ -64,6 +64,14 @@ It produces: ### configuration -No configuration is needed. +Only one parameter is supported: + +```yaml +instance_name: 'name' +``` + +The name of the varnishd instance to get logs from. If not specified, the host name is used. --- + +[]() diff --git a/collectors/python.d.plugin/varnish/varnish.chart.py b/collectors/python.d.plugin/varnish/varnish.chart.py index d889c2b3..da678157 100644 --- a/collectors/python.d.plugin/varnish/varnish.chart.py +++ b/collectors/python.d.plugin/varnish/varnish.chart.py @@ -8,10 +8,6 @@ import re from bases.collection import find_binary from bases.FrameworkServices.ExecutableService import ExecutableService -# default module values (can be overridden per job in `config`) -# update_every = 2 -priority = 60000 -retries = 60 ORDER = [ 'session_connections', @@ -47,7 +43,7 @@ CHARTS = { ] }, 'all_time_hit_rate': { - 'options': [None, 'All History Hit Rate Ratio', 'percent', 'cache performance', + 'options': [None, 'All History Hit Rate Ratio', 'percentage', 'cache performance', 'varnish.all_time_hit_rate', 'stacked'], 'lines': [ ['cache_hit', 'hit', 'percentage-of-absolute-row'], @@ -55,7 +51,7 @@ CHARTS = { ['cache_hitpass', 'hitpass', 'percentage-of-absolute-row']] }, 'current_poll_hit_rate': { - 'options': [None, 'Current Poll Hit Rate Ratio', 'percent', 'cache performance', + 'options': [None, 'Current Poll Hit Rate Ratio', 'percentage', 'cache performance', 'varnish.current_poll_hit_rate', 'stacked'], 'lines': [ ['cache_hit', 'hit', 'percentage-of-incremental-row'], @@ -127,7 +123,7 @@ CHARTS = { ] }, 'memory_usage': { - 'options': [None, 'Memory Usage', 'MB', 'memory usage', 'varnish.memory_usage', 'stacked'], + 'options': [None, 'Memory Usage', 'MiB', 'memory usage', 'varnish.memory_usage', 'stacked'], 'lines': [ ['memory_free', 'free', 'absolute', 1, 1 << 20], ['memory_allocated', 'allocated', 'absolute', 1, 1 << 20]] @@ -140,6 +136,8 @@ CHARTS = { } } +VARNISHSTAT = 'varnishstat' + class Parser: _backend_new = re.compile(r'VBE.([\d\w_.]+)\(.*?\).(beresp[\w_]+)\s+(\d+)') @@ -176,19 +174,31 @@ class Service(ExecutableService): ExecutableService.__init__(self, configuration=configuration, name=name) self.order = ORDER self.definitions = CHARTS - varnishstat = find_binary('varnishstat') - self.command = [varnishstat, '-1'] if varnishstat else None + self.instance_name = configuration.get('instance_name') self.parser = Parser() + self.command = None + + def create_command(self): + varnishstat = find_binary(VARNISHSTAT) + + if not varnishstat: + self.error("can't locate '{0}' binary or binary is not executable by user netdata".format(VARNISHSTAT)) + return False + + if self.instance_name: + self.command = [varnishstat, '-1', '-n', self.instance_name, '-t', '1'] + else: + self.command = [varnishstat, '-1', '-t', '1'] + return True def check(self): - if not self.command: - self.error("Can't locate 'varnishstat' binary or binary is not executable by user netdata") + if not self.create_command(): return False # STDOUT is not empty reply = self._get_raw_data() if not reply: - self.error("No output from 'varnishstat'. Not enough privileges?") + self.error("No output from 'varnishstat'. Is it running? Not enough privileges?") return False self.parser.init(reply) diff --git a/collectors/python.d.plugin/varnish/varnish.conf b/collectors/python.d.plugin/varnish/varnish.conf index 4b069d51..54bfe4de 100644 --- a/collectors/python.d.plugin/varnish/varnish.conf +++ b/collectors/python.d.plugin/varnish/varnish.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,11 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # +# Additionally to the above, varnish also supports the following: +# +# instance_name: 'name' # the name of the varnishd instance to get logs from. If not specified, the host name is used. +# # ---------------------------------------------------------------------- diff --git a/collectors/python.d.plugin/w1sensor/README.md b/collectors/python.d.plugin/w1sensor/README.md index b18f0835..94717c81 100644 --- a/collectors/python.d.plugin/w1sensor/README.md +++ b/collectors/python.d.plugin/w1sensor/README.md @@ -11,3 +11,5 @@ Charts are created dynamically based on the number of detected sensors. For detailed configuration information please read [`w1sensor.conf`](w1sensor.conf) file. --- + +[]() diff --git a/collectors/python.d.plugin/w1sensor/w1sensor.chart.py b/collectors/python.d.plugin/w1sensor/w1sensor.chart.py index 493c4a13..e50312fc 100644 --- a/collectors/python.d.plugin/w1sensor/w1sensor.chart.py +++ b/collectors/python.d.plugin/w1sensor/w1sensor.chart.py @@ -16,7 +16,9 @@ W1_DIR = '/sys/bus/w1/devices/' # Lines matching the following regular expression contain a temperature value RE_TEMP = re.compile(r' t=(\d+)') -ORDER = ['temp'] +ORDER = [ + 'temp', +] CHARTS = { 'temp': { diff --git a/collectors/python.d.plugin/w1sensor/w1sensor.conf b/collectors/python.d.plugin/w1sensor/w1sensor.conf index a4aed8dd..17271001 100644 --- a/collectors/python.d.plugin/w1sensor/w1sensor.conf +++ b/collectors/python.d.plugin/w1sensor/w1sensor.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -58,7 +56,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 5 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, example also supports the following: diff --git a/collectors/python.d.plugin/web_log/README.md b/collectors/python.d.plugin/web_log/README.md index e25a03fb..176551cf 100644 --- a/collectors/python.d.plugin/web_log/README.md +++ b/collectors/python.d.plugin/web_log/README.md @@ -21,7 +21,7 @@ netdata turns this "useless" log file, into a powerful performance and health mo If netdata is installed on a system running a web server, it will detect it and it will automatically present a series of charts, with information obtained from the web server API, like these (*these do not come from the web server log file*):  -*[**netdata**](https://my-netdata.io/) charts based on metrics collected by querying the `nginx` API (i.e. `/stab_status`).* +*[**netdata**](https://my-netdata.io/) charts based on metrics collected by querying the `nginx` API (i.e. `/stub_status`).* > [**netdata**](https://my-netdata.io/) supports `apache`, `nginx`, `lighttpd` and `tomcat`. To obtain real-time information from a web server API, the web server needs to expose it. For directions on configuring your web server, check the config files for each web server. There is a directory with a config file for each web server under [`/etc/netdata/python.d/`](../). @@ -199,3 +199,5 @@ The column `minimum requests` state the minimum number of requests required for [**netdata**](https://my-netdata.io/) alarms are user configurable. Sample config files can be found under directory `health/health.d` of the netdata github repository. So, even [`web_log` alarms can be adapted to your needs](../../../health/health.d/web_log.conf). + +[]() diff --git a/collectors/python.d.plugin/web_log/web_log.chart.py b/collectors/python.d.plugin/web_log/web_log.chart.py index 20e15f4c..99279046 100644 --- a/collectors/python.d.plugin/web_log/web_log.chart.py +++ b/collectors/python.d.plugin/web_log/web_log.chart.py @@ -25,7 +25,9 @@ from bases.collection import read_last_line from bases.FrameworkServices.LogService import LogService -ORDER_APACHE_CACHE = ['apache_cache'] +ORDER_APACHE_CACHE = [ + 'apache_cache', +] ORDER_WEB = [ 'response_statuses', @@ -182,7 +184,7 @@ CHARTS_WEB = { CHARTS_APACHE_CACHE = { 'apache_cache': { - 'options': [None, 'Apache Cached Responses', 'percent cached', 'cached', 'web_log.apache_cache_cache', + 'options': [None, 'Apache Cached Responses', 'percentage', 'cached', 'web_log.apache_cache_cache', 'stacked'], 'lines': [ ['hit', 'cache', 'percentage-of-absolute-row'], diff --git a/collectors/python.d.plugin/web_log/web_log.conf b/collectors/python.d.plugin/web_log/web_log.conf index a67957ae..0ac17f66 100644 --- a/collectors/python.d.plugin/web_log/web_log.conf +++ b/collectors/python.d.plugin/web_log/web_log.conf @@ -27,11 +27,9 @@ # If unset, the default for python.d.plugin is used. # priority: 60000 -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 +# penalty indicates whether to apply penalty to update_every in case of failures. +# Penalty will increase every 5 failed updates in a row. Maximum penalty is 10 minutes. +# penalty: yes # autodetection_retry sets the job re-check interval in seconds. # The job is not deleted if check fails. @@ -61,7 +59,7 @@ # # JOBs sharing a name are mutually exclusive # update_every: 1 # the JOB's data collection frequency # priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts +# penalty: yes # the JOB's penalty # autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, web_log also supports the following: |