diff options
Diffstat (limited to '')
| -rw-r--r-- | conf.d/python.d.conf | 9 | ||||
| -rw-r--r-- | conf.d/python.d/ceph.conf | 75 | ||||
| -rw-r--r-- | conf.d/python.d/httpcheck.conf | 99 | ||||
| -rw-r--r-- | conf.d/python.d/icecast.conf | 83 | ||||
| -rw-r--r-- | conf.d/python.d/mysql.conf | 9 | ||||
| -rw-r--r-- | conf.d/python.d/nginx_plus.conf | 87 | ||||
| -rw-r--r-- | conf.d/python.d/ntpd.conf | 91 | ||||
| -rw-r--r-- | conf.d/python.d/portcheck.conf | 70 | ||||
| -rw-r--r-- | conf.d/python.d/postgres.conf | 15 | ||||
| -rw-r--r-- | conf.d/python.d/springboot.conf | 120 | ||||
| -rw-r--r-- | conf.d/python.d/traefik.conf | 79 | ||||
| -rw-r--r-- | conf.d/python.d/web_log.conf | 1 |
12 files changed, 732 insertions, 6 deletions
diff --git a/conf.d/python.d.conf b/conf.d/python.d.conf index 2c3d400c..bb57738b 100644 --- a/conf.d/python.d.conf +++ b/conf.d/python.d.conf @@ -15,7 +15,7 @@ enabled: yes # # If "default_run" = "yes" the default for all modules is enabled (yes). # Setting any of these to "no" will disable it. -# +# # If "default_run" = "no" the default for all modules is disabled (no). # Setting any of these to "yes" will enable it. @@ -24,6 +24,7 @@ apache_cache: no # apache: yes # beanstalk: yes # bind_rndc: yes +# ceph: yes chrony: no # couchdb: yes # cpufreq: yes @@ -45,6 +46,7 @@ gunicorn_log: no go_expvar: no # haproxy: yes # hddtemp: yes +# icecast: yes # ipfs: yes # isc_dhcpd: yes # mdstat: yes @@ -52,11 +54,13 @@ go_expvar: no # mongodb: yes # mysql: yes # nginx: yes +# nginx_plus: yes # nsd: yes +# ntpd: yes # nginx_log has been replaced by web_log nginx_log: no - +# ntpd: yes # ovpn_status_log: yes # phpfpm: yes # postfix: yes @@ -69,6 +73,7 @@ nginx_log: no # samba: yes # smartd_log: yes # squid: yes +# springboot: yes # tomcat: yes # varnish: yes # web_log: yes diff --git a/conf.d/python.d/ceph.conf b/conf.d/python.d/ceph.conf new file mode 100644 index 00000000..78ac1e25 --- /dev/null +++ b/conf.d/python.d/ceph.conf @@ -0,0 +1,75 @@ +# netdata python.d.plugin configuration for ceph stats +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 10 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 10 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# +# Additionally to the above, ceph plugin also supports the following: +# +# config_file: 'config_file' # Ceph config file. +# keyring_file: 'keyring_file' # Ceph keyring file. netdata user must be added into ceph group +# # and keyring file must be read group permission. +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) +# +config_file: '/etc/ceph/ceph.conf' +keyring_file: '/etc/ceph/ceph.client.admin.keyring' + diff --git a/conf.d/python.d/httpcheck.conf b/conf.d/python.d/httpcheck.conf new file mode 100644 index 00000000..058e057a --- /dev/null +++ b/conf.d/python.d/httpcheck.conf @@ -0,0 +1,99 @@ +# netdata python.d.plugin configuration for httpcheck +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the httpcheck default is used, which is at 3 seconds. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# chart_cleanup sets the default chart cleanup interval in iterations. +# A chart is marked as obsolete if it has not been updated +# 'chart_cleanup' iterations in a row. +# They will be hidden immediately (not offered to dashboard viewer, +# streamed upstream and archived to backends) and deleted one hour +# later (configurable from netdata.conf). +# -- For this plugin, cleanup MUST be disabled, otherwise we lose response +# time charts +chart_cleanup: 0 + +# Autodetection and retries do not work for this plugin + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# ------------------------------- +# ATTENTION: Any valid configuration will be accepted, even if initial connection fails! +# ------------------------------- +# +# There is intentionally no default config, e.g. for 'localhost' + +# job_name: +# name: myname # [optional] the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 3 # [optional] the JOB's data collection frequency +# priority: 60000 # [optional] the JOB's order on the dashboard +# retries: 60 # [optional] the JOB's number of restoration attempts +# timeout: 1 # [optional] the timeout when connecting, supports decimals (e.g. 0.5s) +# url: 'http[s]://host-ip-or-dns[:port][path]' +# # [required] the remote host url to connect to. If [:port] is missing, it defaults to 80 +# # for HTTP and 443 for HTTPS. [path] is optional too, defaults to / +# redirect: yes # [optional] If the remote host returns 3xx status codes, the redirection url will be +# # followed (default). +# status_accepted: # [optional] By default, 200 is accepted. Anything else will result in 'bad status' in the +# # status chart, however: The response time will still be > 0, since the +# # host responded with something. +# # If redirect is enabled, the accepted status will be checked against the redirected page. +# - 200 # Multiple status codes are possible. If you specify 'status_accepted', you would still +# # need to add '200'. E.g. 'status_accepted: [301]' will trigger an error in 'bad status' +# # if code is 200. Do specify numerical entries such as 200, not 'OK'. +# regex: None # [optional] If the status code is accepted, the content of the response will be searched for this +# # regex (if defined). Be aware that you may need to escape the regex string. If redirect is enabled, +# # the regex will be matched to the redirected page, not the initial 3xx response. + +# Simple example: +# +# jira: +# url: 'https://jira.localdomain/' + + +# Complex example: +# +# cool_website: +# url: 'http://cool.website:8080/home' +# status_accepted: +# - 200 +# - 204 +# regex: <title>My cool website!<\/title> +# timeout: 2 + +# This plugin is intended for simple cases. Currently, the accuracy of the response time is low and should be used as reference only. + diff --git a/conf.d/python.d/icecast.conf b/conf.d/python.d/icecast.conf new file mode 100644 index 00000000..a900d06d --- /dev/null +++ b/conf.d/python.d/icecast.conf @@ -0,0 +1,83 @@ +# netdata python.d.plugin configuration for icecast +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# +# Additionally to the above, icecast also supports the following: +# +# url: 'URL' # the URL to fetch icecast's stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost:8443/status-json.xsl' + +localipv4: + name : 'local' + url : 'http://127.0.0.1:8443/status-json.xsl'
\ No newline at end of file diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf index def9f7e9..b5956a2c 100644 --- a/conf.d/python.d/mysql.conf +++ b/conf.d/python.d/mysql.conf @@ -85,12 +85,19 @@ # to connect to the mysql server on localhost, without a password: # # > create user 'netdata'@'localhost'; -# > grant usage on *.* to 'netdata'@'localhost' with grant option; +# > grant usage on *.* to 'netdata'@'localhost'; # > flush privileges; # # with the above statements, netdata will be able to gather mysql # statistics, without the ability to see or alter any data or affect # mysql operation in any way. No change is required below. +# +# If you need to monitor mysql replication too, use this instead: +# +# > create user 'netdata'@'localhost'; +# > grant replication client on *.* to 'netdata'@'localhost'; +# > flush privileges; +# # ---------------------------------------------------------------------- # AUTO-DETECTION JOBS diff --git a/conf.d/python.d/nginx_plus.conf b/conf.d/python.d/nginx_plus.conf new file mode 100644 index 00000000..7b5c8f43 --- /dev/null +++ b/conf.d/python.d/nginx_plus.conf @@ -0,0 +1,87 @@ +# netdata python.d.plugin configuration for nginx_plus +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# +# Additionally to the above, nginx_plus also supports the following: +# +# url: 'URL' # the URL to fetch nginx_plus's stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost/status' + +localipv4: + name : 'local' + url : 'http://127.0.0.1/status' + +localipv6: + name : 'local' + url : 'http://[::1]/status' diff --git a/conf.d/python.d/ntpd.conf b/conf.d/python.d/ntpd.conf new file mode 100644 index 00000000..7adc4074 --- /dev/null +++ b/conf.d/python.d/ntpd.conf @@ -0,0 +1,91 @@ +# netdata python.d.plugin configuration for ntpd +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# +# Additionally to the above, ntp also supports the following: +# +# host: 'localhost' # the host to query +# port: '123' # the UDP port where `ntpd` listens +# show_peers: no # use `yes` to show peer charts. enabling this +# # option is recommended only for debugging, as +# # it could possibly imply memory leaks if the +# # peers change frequently. +# peer_filter: '127\..*' # regex to exclude peers +# # by default local peers are hidden +# # use `''` to show all peers. +# peer_rescan: 60 # interval (>0) to check for new/changed peers +# # use `1` to check on every update +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name: 'local' + host: 'localhost' + port: '123' + show_peers: no + +localhost_ipv4: + name: 'local' + host: '127.0.0.1' + port: '123' + show_peers: no + +localhost_ipv6: + name: 'local' + host: '::1' + port: '123' + show_peers: no diff --git a/conf.d/python.d/portcheck.conf b/conf.d/python.d/portcheck.conf new file mode 100644 index 00000000..b3dd8bd3 --- /dev/null +++ b/conf.d/python.d/portcheck.conf @@ -0,0 +1,70 @@ +# netdata python.d.plugin configuration for portcheck +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# chart_cleanup sets the default chart cleanup interval in iterations. +# A chart is marked as obsolete if it has not been updated +# 'chart_cleanup' iterations in a row. +# They will be hidden immediately (not offered to dashboard viewer, +# streamed upstream and archived to backends) and deleted one hour +# later (configurable from netdata.conf). +# -- For this plugin, cleanup MUST be disabled, otherwise we lose latency chart +chart_cleanup: 0 + +# Autodetection and retries do not work for this plugin + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# ------------------------------- +# ATTENTION: Any valid configuration will be accepted, even if initial connection fails! +# ------------------------------- +# +# There is intentionally no default config for 'localhost' + +# job_name: +# name: myname # [optional] the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # [optional] the JOB's data collection frequency +# priority: 60000 # [optional] the JOB's order on the dashboard +# retries: 60 # [optional] the JOB's number of restoration attempts +# timeout: 1 # [optional] the socket timeout when connecting +# host: 'dns or ip' # [required] the remote host address in either IPv4, IPv6 or as DNS name. +# port: 22 # [required] the port number to check. Specify an integer, not service name. + +# You just have been warned about possible portscan blocking. The portcheck plugin is meant for simple use cases. +# Currently, the accuracy of the latency is low and should be used as reference only. + diff --git a/conf.d/python.d/postgres.conf b/conf.d/python.d/postgres.conf index 3a70a718..b69ca371 100644 --- a/conf.d/python.d/postgres.conf +++ b/conf.d/python.d/postgres.conf @@ -82,9 +82,18 @@ # a postgres user for netdata and add its password below to allow # netdata connect. # -# Without superuser access, netdata won't be able to generate the write -# ahead log and the background writer charts. -# +# Postgres supported versions are : +# - 9.3 (without autovacuum) +# - 9.4 +# - 9.5 +# - 9.6 +# - 10 +# +# Superuser access is needed for theses charts: +# Write-Ahead Logs +# Archive Write-Ahead Logs +# +# Autovacuum charts is allowed since Postgres 9.4 # ---------------------------------------------------------------------- socket: diff --git a/conf.d/python.d/springboot.conf b/conf.d/python.d/springboot.conf new file mode 100644 index 00000000..40b5fb43 --- /dev/null +++ b/conf.d/python.d/springboot.conf @@ -0,0 +1,120 @@ +# netdata python.d.plugin configuration for springboot +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# +# Additionally to the above, this plugin also supports the following: +# +# url: 'http://127.0.0.1/metrics' # the URL of the spring boot actuator metrics +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# +# defaults: +# [chart_id]: true | false # enables/disables default charts, defaults true. +# extras: {} # defines extra charts to monitor, please see the example below +# - id: [chart_id] +# options: {} +# lines: [] +# +# If all defaults is disabled and no extra charts are defined, this module will disable itself, as it has no data to +# collect. +# +# Configuration example +# --------------------- +# expample: +# name: 'example' +# url: 'http://localhost:8080/metrics' +# defaults: +# response_code: true +# threads: true +# gc_time: true +# gc_ope: true +# heap: false +# extras: +# - id: 'heap' +# options: { title: 'Heap Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap', charttype: 'stacked' } +# lines: +# - { dimension: 'mem_free', name: 'free'} +# - { dimension: 'mempool_eden_used', name: 'eden', algorithm: 'absolute', multiplier: 1, divisor: 1} +# - { dimension: 'mempool_survivor_used', name: 'survivor', algorithm: 'absolute', multiplier: 1, divisor: 1} +# - { dimension: 'mempool_tenured_used', name: 'tenured', algorithm: 'absolute', multiplier: 1, divisor: 1} +# - id: 'heap_eden' +# options: { title: 'Eden Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_eden', charttype: 'area' } +# lines: +# - { dimension: 'mempool_eden_used', name: 'used'} +# - { dimension: 'mempool_eden_committed', name: 'commited'} +# - id: 'heap_survivor' +# options: { title: 'Survivor Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_survivor', charttype: 'area' } +# lines: +# - { dimension: 'mempool_survivor_used', name: 'used'} +# - { dimension: 'mempool_survivor_committed', name: 'commited'} +# - id: 'heap_tenured' +# options: { title: 'Tenured Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_tenured', charttype: 'area' } +# lines: +# - { dimension: 'mempool_tenured_used', name: 'used'} +# - { dimension: 'mempool_tenured_committed', name: 'commited'} + + +local: + name: 'local' + url: 'http://localhost:8080/metrics' + +local_ip: + name: 'local' + url: 'http://127.0.0.1:8080/metrics' diff --git a/conf.d/python.d/traefik.conf b/conf.d/python.d/traefik.conf new file mode 100644 index 00000000..909b9e54 --- /dev/null +++ b/conf.d/python.d/traefik.conf @@ -0,0 +1,79 @@ +# netdata python.d.plugin configuration for traefik health data API +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 10 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# +# Additionally to the above, traefik plugin also supports the following: +# +# url: '<scheme>://<host>:<port>/<health_page_api>' +# # http://localhost:8080/health +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) +# +local: + url: 'http://localhost:8080/health' diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf index dd1fff07..c185f8d8 100644 --- a/conf.d/python.d/web_log.conf +++ b/conf.d/python.d/web_log.conf @@ -85,6 +85,7 @@ # custom_log_format: # define a custom log format # pattern: '(?P<address>[\da-f.:]+) -.*?"(?P<method>[A-Z]+) (?P<url>.*?)" (?P<code>[1-9]\d{2}) (?P<bytes_sent>\d+) (?P<resp_length>\d+) (?P<resp_time>\d+\.\d+) ' # time_multiplier: 1000000 # type <int> - convert time to microseconds +# histogram: [1,3,10,30,100, ...] # type list of int - Cumulative histogram of response time in milli seconds # ---------------------------------------------------------------------- # WEB SERVER CONFIGURATION |