diff options
Diffstat (limited to '')
| -rw-r--r-- | conf.d/python.d.conf | 42 | ||||
| -rw-r--r-- | conf.d/python.d/apache.conf | 80 | ||||
| -rw-r--r-- | conf.d/python.d/apache_cache.conf | 76 | ||||
| -rw-r--r-- | conf.d/python.d/cpufreq.conf | 37 | ||||
| -rw-r--r-- | conf.d/python.d/dovecot.conf | 89 | ||||
| -rw-r--r-- | conf.d/python.d/example.conf | 63 | ||||
| -rw-r--r-- | conf.d/python.d/exim.conf | 86 | ||||
| -rw-r--r-- | conf.d/python.d/hddtemp.conf | 90 | ||||
| -rw-r--r-- | conf.d/python.d/ipfs.conf | 67 | ||||
| -rw-r--r-- | conf.d/python.d/memcached.conf | 85 | ||||
| -rw-r--r-- | conf.d/python.d/mysql.conf | 175 | ||||
| -rw-r--r-- | conf.d/python.d/nginx.conf | 82 | ||||
| -rw-r--r-- | conf.d/python.d/nginx_log.conf | 72 | ||||
| -rw-r--r-- | conf.d/python.d/phpfpm.conf | 82 | ||||
| -rw-r--r-- | conf.d/python.d/postfix.conf | 67 | ||||
| -rw-r--r-- | conf.d/python.d/redis.conf | 97 | ||||
| -rw-r--r-- | conf.d/python.d/sensors.conf | 54 | ||||
| -rw-r--r-- | conf.d/python.d/squid.conf | 162 | ||||
| -rw-r--r-- | conf.d/python.d/tomcat.conf | 81 |
19 files changed, 1587 insertions, 0 deletions
diff --git a/conf.d/python.d.conf b/conf.d/python.d.conf new file mode 100644 index 00000000..940bd918 --- /dev/null +++ b/conf.d/python.d.conf @@ -0,0 +1,42 @@ +# netdata python.d.plugin configuration +# +# This file is in YaML format. +# Generally the format is: +# +# name: value +# + +# Enable / disable the whole python.d.plugin (all its modules) +enabled: yes + +# Prevent log flood +# Define how many log messages can be written to log file in one log_interval +logs_per_interval: 200 + +# Define how long is one logging interval (in seconds) +log_interval: 3600 + +# ---------------------------------------------------------------------- +# Enable / Disable python.d.plugin modules +# +# The default for all modules is enabled (yes). +# Setting any of these to no will disable it. + +# apache: yes +# apache_cache: yes +# cpufreq: yes +# dovecot: yes +example: no +# exim: yes +# hddtemp: yes +# ipfs: yes +# memcached: yes +# mysql: yes +# nginx: yes +# nginx_log: yes +# phpfpm: yes +# postfix: yes +# redis: yes +# sensors: yes +# squid: yes +# tomcat: yes diff --git a/conf.d/python.d/apache.conf b/conf.d/python.d/apache.conf new file mode 100644 index 00000000..5b151ef7 --- /dev/null +++ b/conf.d/python.d/apache.conf @@ -0,0 +1,80 @@ +# netdata python.d.plugin configuration for apache +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, apache also supports the following: +# +# url: 'URL' # the URL to fetch apache's mod_status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost/server-status?auto' + +localipv4: + name : 'local' + url : 'http://127.0.0.1/server-status?auto' + +localipv6: + name : 'local' + url : 'http://::1/server-status?auto' diff --git a/conf.d/python.d/apache_cache.conf b/conf.d/python.d/apache_cache.conf new file mode 100644 index 00000000..98eecd0e --- /dev/null +++ b/conf.d/python.d/apache_cache.conf @@ -0,0 +1,76 @@ +# netdata python.d.plugin configuration for apache cache +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, apache_cache also supports the following: +# +# path: 'PATH' # the path to apache's cache.log +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +apache: + name: 'local' + path: '/var/log/apache/cache.log' + +apache2: + name: 'local' + path: '/var/log/apache2/cache.log' + +httpd: + name: 'local' + path: '/var/log/httpd/cache.log' diff --git a/conf.d/python.d/cpufreq.conf b/conf.d/python.d/cpufreq.conf new file mode 100644 index 00000000..10c96917 --- /dev/null +++ b/conf.d/python.d/cpufreq.conf @@ -0,0 +1,37 @@ +# netdata python.d.plugin configuration for cpufreq +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# The directory to search for the file scaling_cur_freq +sys_dir: "/sys/devices" diff --git a/conf.d/python.d/dovecot.conf b/conf.d/python.d/dovecot.conf new file mode 100644 index 00000000..917c5272 --- /dev/null +++ b/conf.d/python.d/dovecot.conf @@ -0,0 +1,89 @@ +# netdata python.d.plugin configuration for dovecot +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, dovecot also supports the following: +# +# socket: 'path/to/dovecot/stats' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + host : 'localhost' + port : 24242 + +localipv4: + name : 'local' + host : '127.0.0.1' + port : 24242 + +localipv6: + name : 'local' + host : '::1' + port : 24242 + +localsocket: + name : 'local' + socket : '/var/run/dovecot/stats' + diff --git a/conf.d/python.d/example.conf b/conf.d/python.d/example.conf new file mode 100644 index 00000000..31f9a49a --- /dev/null +++ b/conf.d/python.d/example.conf @@ -0,0 +1,63 @@ +# netdata python.d.plugin configuration for example +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, example also supports the following: +# +# - none +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) diff --git a/conf.d/python.d/exim.conf b/conf.d/python.d/exim.conf new file mode 100644 index 00000000..6aca13c3 --- /dev/null +++ b/conf.d/python.d/exim.conf @@ -0,0 +1,86 @@ +# netdata python.d.plugin configuration for postfix +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# exim is slow, so once every 10 seconds +update_every: 10 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, postfix also supports the following: +# +# command: 'exim -bpc' # the command to run +# + +# ---------------------------------------------------------------------- +# REQUIRED exim CONFIGURATION +# +# netdata will query exim as user netdata. +# By default exim will refuse to respond. +# +# To allow querying exim as non-admin user, please set the following +# to your exim configuration: +# +# queue_list_requires_admin = false +# +# Your exim configuration should be in +# +# /etc/exim/exim4.conf +# or +# /etc/exim4/conf.d/main/000_local_options +# +# Please consult your distribution information to find the exact file. + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS + +local: + command: 'exim -bpc' diff --git a/conf.d/python.d/hddtemp.conf b/conf.d/python.d/hddtemp.conf new file mode 100644 index 00000000..0c78449b --- /dev/null +++ b/conf.d/python.d/hddtemp.conf @@ -0,0 +1,90 @@ +# netdata python.d.plugin configuration for hddtemp +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, hddtemp also supports the following: +# +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# + +# By default this module will try to autodetect disks +# (autodetection works only for disk which names start with "sd"). +# However this can be overridden by setting variable `disks` to +# array of desired disks. Example for two disks: +# +# devices: +# - sda +# - sdb +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name: 'local' + host: 'localhost' + port: 7634 + +localipv4: + name: 'local' + host: '127.0.0.1' + port: 7634 + +localipv6: + name: 'local' + host: '::1' + port: 7634 diff --git a/conf.d/python.d/ipfs.conf b/conf.d/python.d/ipfs.conf new file mode 100644 index 00000000..e039026c --- /dev/null +++ b/conf.d/python.d/ipfs.conf @@ -0,0 +1,67 @@ +# netdata python.d.plugin configuration for ipfs +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, ipfs also supports the following: +# +# url: 'URL' # URL to the IPFS API +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost:5001' diff --git a/conf.d/python.d/memcached.conf b/conf.d/python.d/memcached.conf new file mode 100644 index 00000000..f1723dc8 --- /dev/null +++ b/conf.d/python.d/memcached.conf @@ -0,0 +1,85 @@ +# netdata python.d.plugin configuration for memcached +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, memcached also supports the following: +# +# socket: 'path/to/memcached.sock' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + host : 'localhost' + port : 11211 + +localipv4: + name : 'local' + host : '127.0.0.1' + port : 11211 + +localipv6: + name : 'local' + host : '::1' + port : 11211 + diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf new file mode 100644 index 00000000..d247b89a --- /dev/null +++ b/conf.d/python.d/mysql.conf @@ -0,0 +1,175 @@ +# netdata python.d.plugin configuration for mysql +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, mysql also supports the following: +# +# socket: 'path/to/mysql.sock' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# in all cases, the following can also be set: +# +# user: 'username' # the mysql username to use +# pass: 'password' # the mysql password to use +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +mycnf1: + name : 'local' + 'my.cnf' : '/etc/my.cnf' + +mycnf2: + name : 'local' + 'my.cnf' : '/etc/mysql/my.cnf' + +socket1: + name : 'local' + # user : '' + # pass : '' + socket : '/var/run/mysqld/mysqld.sock' + +socket2: + name : 'local' + # user : '' + # pass : '' + socket : '/var/lib/mysql/mysql.sock' + +socket3: + name : 'local' + # user : '' + # pass : '' + socket : '/tmp/mysql.sock' + +tcp: + name : 'local' + # user : '' + # pass : '' + host : 'localhost' + port : '3306' + +tcpipv4: + name : 'local' + # user : '' + # pass : '' + host : '127.0.0.1' + port : '3306' + +tcpipv6: + name : 'local' + # user : '' + # pass : '' + host : '::1' + port : '3306' + + +# Now we try the same as above with user: root +# A few systems configure mysql to accept passwordless +# root access. + +mycnf1_root: + name : 'local' + user : 'root' + 'my.cnf' : '/etc/my.cnf' + +mycnf2_root: + name : 'local' + user : 'root' + 'my.cnf' : '/etc/mysql/my.cnf' + +socket1_root: + name : 'local' + user : 'root' + # pass : '' + socket : '/var/run/mysqld/mysqld.sock' + +socket2_root: + name : 'local' + user : 'root' + # pass : '' + socket : '/var/lib/mysql/mysql.sock' + +socket3_root: + name : 'local' + user : 'root' + # pass : '' + socket : '/tmp/mysql.sock' + +tcp_root: + name : 'local' + user : 'root' + # pass : '' + host : 'localhost' + port : '3306' + +tcpipv4_root: + name : 'local' + user : 'root' + # pass : '' + host : '127.0.0.1' + port : '3306' + +tcpipv6_root: + name : 'local' + user : 'root' + # pass : '' + host : '::1' + port : '3306' + diff --git a/conf.d/python.d/nginx.conf b/conf.d/python.d/nginx.conf new file mode 100644 index 00000000..1a27d67c --- /dev/null +++ b/conf.d/python.d/nginx.conf @@ -0,0 +1,82 @@ +# netdata python.d.plugin configuration for nginx +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, nginx also supports the following: +# +# url: 'URL' # the URL to fetch nginx's status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost/stub_status' + +localipv4: + name : 'local' + url : 'http://127.0.0.1/stub_status' + +localipv6: + name : 'local' + url : 'http://::1/stub_status' + diff --git a/conf.d/python.d/nginx_log.conf b/conf.d/python.d/nginx_log.conf new file mode 100644 index 00000000..6a53c520 --- /dev/null +++ b/conf.d/python.d/nginx_log.conf @@ -0,0 +1,72 @@ +# netdata python.d.plugin configuration for nginx log +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, nginx_log also supports the following: +# +# path: 'PATH' # the path to nginx's access.log +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +nginx_log: + name: 'local' + path: '/var/log/nginx/access.log' + +nginx_log2: + name: 'local' + path: '/var/log/nginx/nginx-access.log' diff --git a/conf.d/python.d/phpfpm.conf b/conf.d/python.d/phpfpm.conf new file mode 100644 index 00000000..06d2367a --- /dev/null +++ b/conf.d/python.d/phpfpm.conf @@ -0,0 +1,82 @@ +# netdata python.d.plugin configuration for PHP-FPM +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, PHP-FPM also supports the following: +# +# url: 'URL' # the URL to fetch nginx's status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : "http://localhost/status" + +localipv4: + name : 'local' + url : "http://127.0.0.1/status" + +localipv6: + name : 'local' + url : "http://::1/status" + diff --git a/conf.d/python.d/postfix.conf b/conf.d/python.d/postfix.conf new file mode 100644 index 00000000..ca9d8fad --- /dev/null +++ b/conf.d/python.d/postfix.conf @@ -0,0 +1,67 @@ +# netdata python.d.plugin configuration for postfix +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# postfix is slow, so once every 10 seconds +update_every: 10 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, postfix also supports the following: +# +# command: 'postqueue -p' # the command to run +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS + +local: + command: 'postqueue -p' diff --git a/conf.d/python.d/redis.conf b/conf.d/python.d/redis.conf new file mode 100644 index 00000000..9935bff7 --- /dev/null +++ b/conf.d/python.d/redis.conf @@ -0,0 +1,97 @@ +# netdata python.d.plugin configuration for redis +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, redis also supports the following: +# +# socket: 'path/to/mysql.sock' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +socket1: + name : 'local' + socket : '/tmp/redis.sock' + +socket2: + name : 'local' + socket : '/var/run/redis/redis.sock' + +socket3: + name : 'local' + socket : '/var/lib/redis/redis.sock' + +localhost: + name : 'local' + host : 'localhost' + port : 6379 + +localipv4: + name : 'local' + host : '127.0.0.1' + port : 6379 + +localipv6: + name : 'local' + host : '::1' + port : 6379 + diff --git a/conf.d/python.d/sensors.conf b/conf.d/python.d/sensors.conf new file mode 100644 index 00000000..7d895c34 --- /dev/null +++ b/conf.d/python.d/sensors.conf @@ -0,0 +1,54 @@ +# netdata python.d.plugin configuration for sensors +# +# This file is in YaML format. Generally the format is: +# +# name: value +# + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# Limit the number of sensors types. +# Comment the ones you want to disable. +# Also, re-arranging this list controls the order of the charts at the +# netdata dashboard. + +types: + - temperature + - fan + - voltage + - current + - power + - energy + - humidity + +# ---------------------------------------------------------------------- +# Limit the number of sensors chips. +# Uncomment the first line (chips:) and add chip names below it. +# The chip names that start with like that will be matched. +# You can find the chip names using the sensors command. + +#chips: +# - i8k +# - coretemp +# +# chip names can be found using the sensors shell command +# the prefix is matched (anything that starts like that) diff --git a/conf.d/python.d/squid.conf b/conf.d/python.d/squid.conf new file mode 100644 index 00000000..27800bde --- /dev/null +++ b/conf.d/python.d/squid.conf @@ -0,0 +1,162 @@ +# netdata python.d.plugin configuration for squid +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, squid also supports the following: +# +# host : 'IP or HOSTNAME' # the host to connect to +# port : PORT # the port to connect to +# request: 'URL' # the URL to request from squid +# + +# ---------------------------------------------------------------------- +# SQUID CONFIGURATION +# +# See: +# http://wiki.squid-cache.org/Features/CacheManager +# +# In short, add to your squid configuration these: +# +# http_access allow localhost manager +# http_access deny manager +# +# To remotely monitor a squid: +# +# acl managerAdmin src 192.0.2.1 +# http_access allow localhost manager +# http_access allow managerAdmin manager +# http_access deny manager +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +tcp3128old: + name : 'local' + host : 'localhost' + port : 3128 + request : 'cache_object://localhost:3128/counters' + +tcp8080old: + name : 'local' + host : 'localhost' + port : 8080 + request : 'cache_object://localhost:3128/counters' + +tcp3128new: + name : 'local' + host : 'localhost' + port : 3128 + request : '/squid-internal-mgr/counters' + +tcp8080new: + name : 'local' + host : 'localhost' + port : 8080 + request : '/squid-internal-mgr/counters' + +# IPv4 + +tcp3128oldipv4: + name : 'local' + host : '127.0.0.1' + port : 3128 + request : 'cache_object://127.0.0.1:3128/counters' + +tcp8080oldipv4: + name : 'local' + host : '127.0.0.1' + port : 8080 + request : 'cache_object://127.0.0.1:3128/counters' + +tcp3128newipv4: + name : 'local' + host : '127.0.0.1' + port : 3128 + request : '/squid-internal-mgr/counters' + +tcp8080newipv4: + name : 'local' + host : '127.0.0.1' + port : 8080 + request : '/squid-internal-mgr/counters' + +# IPv6 + +tcp3128oldipv6: + name : 'local' + host : '::1' + port : 3128 + request : 'cache_object://[::1]:3128/counters' + +tcp8080oldipv6: + name : 'local' + host : '::1' + port : 8080 + request : 'cache_object://[::1]:3128/counters' + +tcp3128newipv6: + name : 'local' + host : '::1' + port : 3128 + request : '/squid-internal-mgr/counters' + +tcp8080newipv6: + name : 'local' + host : '::1' + port : 8080 + request : '/squid-internal-mgr/counters' + diff --git a/conf.d/python.d/tomcat.conf b/conf.d/python.d/tomcat.conf new file mode 100644 index 00000000..aef9631b --- /dev/null +++ b/conf.d/python.d/tomcat.conf @@ -0,0 +1,81 @@ +# netdata python.d.plugin configuration for tomcat +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, tomcat also supports the following: +# +# url: 'URL' # the URL to fetch nginx's status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost:8080/manager/status?XML=true' + +localipv4: + name : 'local' + url : 'http://127.0.0.1:8080/manager/status?XML=true' + +localipv6: + name : 'local' + url : 'http://[::1]:8080/manager/status?XML=true' |