diff options
Diffstat (limited to 'conf.d/python.d')
| -rw-r--r-- | conf.d/python.d/bind_rndc.conf | 109 | ||||
| -rw-r--r-- | conf.d/python.d/elasticsearch.conf | 72 | ||||
| -rw-r--r-- | conf.d/python.d/exim.conf | 4 | ||||
| -rw-r--r-- | conf.d/python.d/fail2ban.conf | 77 | ||||
| -rw-r--r-- | conf.d/python.d/freeradius.conf | 86 | ||||
| -rw-r--r-- | conf.d/python.d/gunicorn_log.conf | 73 | ||||
| -rw-r--r-- | conf.d/python.d/haproxy.conf | 78 | ||||
| -rw-r--r-- | conf.d/python.d/hddtemp.conf | 3 | ||||
| -rw-r--r-- | conf.d/python.d/isc_dhcpd.conf | 78 | ||||
| -rw-r--r-- | conf.d/python.d/mdstat.conf | 26 | ||||
| -rw-r--r-- | conf.d/python.d/mysql.conf | 97 | ||||
| -rw-r--r-- | conf.d/python.d/ovpn_status_log.conf | 86 | ||||
| -rw-r--r-- | conf.d/python.d/postgres.conf | 104 | ||||
| -rw-r--r-- | conf.d/python.d/redis.conf | 10 | ||||
| -rw-r--r-- | conf.d/python.d/sensors.conf | 4 | ||||
| -rw-r--r-- | conf.d/python.d/varnish.conf | 65 |
16 files changed, 967 insertions, 5 deletions
diff --git a/conf.d/python.d/bind_rndc.conf b/conf.d/python.d/bind_rndc.conf new file mode 100644 index 000000000..e4f7ac825 --- /dev/null +++ b/conf.d/python.d/bind_rndc.conf @@ -0,0 +1,109 @@ +# netdata python.d.plugin configuration for bind_rndc +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, bind_rndc also supports the following: +# +# named_stats_path: 'path to named.stats' # Default: '/var/log/bind/named.stats' +#------------------------------------------------------------------------------------------------------------------ +# IMPORTANT Information +# +# BIND APPEND logs at EVERY RUN. Its NOT RECOMMENDED to set update_every below 30 sec. +# STRONGLY RECOMMENDED to create a bind-rndc conf file for logrotate +# +# To set up your BIND to dump stats do the following: +# +# 1. add to 'named.conf.options' options {}: +# statistics-file "/var/log/bind/named.stats"; +# +# 2. Create bind/ directory in /var/log +# cd /var/log/ && mkdir bind +# +# 3. Change owner of directory to 'bind' user +# chown bind bind/ +# +# 4. RELOAD (NOT restart) BIND +# systemctl reload bind9.serice +# +# 5. Run as a root 'rndc stats' to dump (BIND will create named.stats in new directory) +# +# +# To ALLOW NETDATA TO RUN 'rndc stats' change '/etc/bind/rndc.key' group to netdata +# chown :netdata rndc.key +# +# The last BUT NOT least is to create bind-rndc.conf in logrotate.d/ +# The working one +# /var/log/bind/named.stats { +# +# daily +# rotate 4 +# compress +# delaycompress +# create 0644 bind bind +# missingok +# postrotate +# rndc reload > /dev/null +# endscript +# } +# +# To test your logrotate conf file run as root: +# +# logrotate /etc/logrotate.d/bind-rndc -d (debug dry-run mode) +# ------------------------------------------------------------------------------------------------------------------ +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) +# +#local: +# named_stats_path: '/var/log/bind/named.stats' diff --git a/conf.d/python.d/elasticsearch.conf b/conf.d/python.d/elasticsearch.conf new file mode 100644 index 000000000..1faee8582 --- /dev/null +++ b/conf.d/python.d/elasticsearch.conf @@ -0,0 +1,72 @@ +# netdata python.d.plugin configuration for elasticsearch stats +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, elasticsearch plugin also supports the following: +# +# host: 'ipaddress' # Server ip address or hostname. +# port: 'port' # Port on which elasticsearch listen. +# cluster_health: False/True # Calls to cluster health elasticsearch API. Enabled by default. +# cluster_stats: False/True # Calls to cluster stats elasticsearch API. Enabled by default. +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) +# +#local: +# host: '127.0.0.1' +# port: '9200' +# cluster_health: True +# cluster_stats: True diff --git a/conf.d/python.d/exim.conf b/conf.d/python.d/exim.conf index 6aca13c34..07d72c5a3 100644 --- a/conf.d/python.d/exim.conf +++ b/conf.d/python.d/exim.conf @@ -1,4 +1,4 @@ -# netdata python.d.plugin configuration for postfix +# netdata python.d.plugin configuration for exim # # This file is in YaML format. Generally the format is: # @@ -55,7 +55,7 @@ update_every: 10 # priority: 60000 # the JOB's order on the dashboard # retries: 5 # the JOB's number of restoration attempts # -# Additionally to the above, postfix also supports the following: +# Additionally to the above, exim also supports the following: # # command: 'exim -bpc' # the command to run # diff --git a/conf.d/python.d/fail2ban.conf b/conf.d/python.d/fail2ban.conf new file mode 100644 index 000000000..cd805be8d --- /dev/null +++ b/conf.d/python.d/fail2ban.conf @@ -0,0 +1,77 @@ +# netdata python.d.plugin configuration for fail2ban +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, fail2ban also supports the following: +# +# log_path: 'path to fail2ban.log' # Default: '/var/log/fail2ban.log' +# conf_path: 'path to jail.local/jail.conf' # Default: '/etc/fail2ban/jail.local' +# exclude: 'jails you want to exclude from autodetection' # Default: '[]' empty list +#------------------------------------------------------------------------------------------------------------------ +# IMPORTANT Information +# +# fail2ban.log file MUST BE readable by netdata. +# A good idea is to do this by adding the +# # create 0640 root netdata +# to fail2ban conf at logrotate.d +# +# ------------------------------------------------------------------------------------------------------------------ +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +#local: +# log_path: '/var/log/fail2ban.log' +# conf_path: '/etc/fail2ban/jail.local' +# exclude: 'dropbear apache' diff --git a/conf.d/python.d/freeradius.conf b/conf.d/python.d/freeradius.conf new file mode 100644 index 000000000..b2c8abf6b --- /dev/null +++ b/conf.d/python.d/freeradius.conf @@ -0,0 +1,86 @@ +# netdata python.d.plugin configuration for freeradius +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, freeradius also supports the following: +# +# host: 'host' # Default: 'localhost'. Server ip address or hostname. +# port: 'port' # Default: '18121'. Port on which freeradius server listen (type = status). +# secret: 'secret' # Default: 'adminsecret'. +# acct: True/False # Defalt: False. Freeradius accounting statistics. +# proxy_auth: True/False # Default: False. Freeradius proxy authentication statistics. +# proxy_acct: True/False # Default: False. Freeradius proxy accounting statistics. +# +# ------------------------------------------------------------------------------------------------------------------ +# Freeradius server configuration: +# The configuration for the status server is automatically created in the sites-available directory. +# By default, server is enabled and can be queried from every client. +# FreeRADIUS will only respond to status-server messages, if the status-server virtual server has been enabled. +# To do this, create a link from the sites-enabled directory to the status file in the sites-available directory: +# cd sites-enabled +# ln -s ../sites-available/status status +# and restart/reload your FREERADIUS server. +# ------------------------------------------------------------------------------------------------------------------ +# +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +local: + host: 'localhost' + port: '18121' + secret: 'adminsecret' +#acct: False +#proxy_auth: False +#proxy_acct: False diff --git a/conf.d/python.d/gunicorn_log.conf b/conf.d/python.d/gunicorn_log.conf new file mode 100644 index 000000000..8fea483f0 --- /dev/null +++ b/conf.d/python.d/gunicorn_log.conf @@ -0,0 +1,73 @@ +# netdata python.d.plugin configuration for nginx gunicorn log +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, gunicorn_log also supports the following: +# +# path: 'PATH' # the path to gunicorn's access.log +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +gunicorn_log: + name: 'local' + path: '/var/log/gunicorn/access.log' + +gunicorn_log2: + name: 'local' + path: '/var/log/gunicorn/gunicorn-access.log' + diff --git a/conf.d/python.d/haproxy.conf b/conf.d/python.d/haproxy.conf new file mode 100644 index 000000000..a9e048791 --- /dev/null +++ b/conf.d/python.d/haproxy.conf @@ -0,0 +1,78 @@ +# netdata python.d.plugin configuration for haproxy +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, haproxy also supports the following: +# +# IMPORTANT: socket MUST BE readable AND writable by netdata user +# +# socket: 'path/to/haproxy/sock' +# +# OR +# url: 'http://<ip.address>:<port>/<url>;csv;norefresh' +# [user: USERNAME] only if stats auth is used +# [pass: PASSWORD] only if stats auth is used + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +#via_url: +# user : 'admin' +# pass : 'password' +# url : 'http://127.0.0.1:7000/haproxy_stats;csv;norefresh' + +#via_socket: +# socket: '/var/run/haproxy/admin.sock' diff --git a/conf.d/python.d/hddtemp.conf b/conf.d/python.d/hddtemp.conf index 0c78449b4..f74a09803 100644 --- a/conf.d/python.d/hddtemp.conf +++ b/conf.d/python.d/hddtemp.conf @@ -58,6 +58,7 @@ # # host: 'IP or HOSTNAME' # the host to connect to # port: PORT # the port to connect to +# fahrenheit: True/False # fahrenheit instead of celsius. Default is False # # By default this module will try to autodetect disks @@ -77,11 +78,13 @@ localhost: name: 'local' host: 'localhost' + fahrenheit: False port: 7634 localipv4: name: 'local' host: '127.0.0.1' + fahrenheit: False port: 7634 localipv6: diff --git a/conf.d/python.d/isc_dhcpd.conf b/conf.d/python.d/isc_dhcpd.conf new file mode 100644 index 000000000..7c8fe3ceb --- /dev/null +++ b/conf.d/python.d/isc_dhcpd.conf @@ -0,0 +1,78 @@ +# netdata python.d.plugin configuration for isc dhcpd leases +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, isc_dhcpd supports the following: +# +# leases_path: 'PATH' # the path to dhcpd.leases file +# pools: 'dhcpd pools list' # Pools in CIDR format +# +#----------------------------------------------------------------------- +# IMPORTANT notes +# +# 1. Make sure leases file is readable by netdata. +# 2. Current implementation works only with 'default' db-time-format +# (weekday year/month/day hour:minute:second). +# This is the default, so it will work in most cases. +# 3. Pools MUST BE in CIDR format. +# +#----------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# This is disabled by default. +# To enable it, uncomment the following. +# +#leases: +# leases_path : '/var/lib/dhcp/dhcpd.leases' +# pools : '192.168.3.0/24 192.168.4.0/24 192.168.5.0/24' diff --git a/conf.d/python.d/mdstat.conf b/conf.d/python.d/mdstat.conf new file mode 100644 index 000000000..c89d463be --- /dev/null +++ b/conf.d/python.d/mdstat.conf @@ -0,0 +1,26 @@ +# netdata python.d.plugin configuration for mdstat +# +# This file is in YaML format. Generally the format is: +# +# name: value +# + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf index 8fbbe6513..63d635174 100644 --- a/conf.d/python.d/mysql.conf +++ b/conf.d/python.d/mysql.conf @@ -69,6 +69,23 @@ # # ---------------------------------------------------------------------- +# mySQL CONFIGURATION +# +# netdata does not need any privilege - only the ability to connect +# to the mysql server (netdata will not be able to see any data). +# +# Execute these commands to give the local user 'netdata' the ability +# to connect to the mysql server on localhost, without a password: +# +# > create user 'netdata'@'localhost'; +# > grant usage on *.* to 'netdata'@'localhost' with grant option; +# > flush privileges; +# +# with the above statements, netdata will be able to gather mysql +# statistics, without the ability to see or alter any data or affect +# mysql operation in any way. No change is required below. + +# ---------------------------------------------------------------------- # AUTO-DETECTION JOBS # only one of them will run (they have the same name) @@ -80,6 +97,10 @@ mycnf2: name : 'local' 'my.cnf' : '/etc/mysql/my.cnf' +debiancnf: + name : 'local' + 'my.cnf' : '/etc/mysql/debian.cnf' + socket1: name : 'local' # user : '' @@ -90,12 +111,18 @@ socket2: name : 'local' # user : '' # pass : '' - socket : '/var/lib/mysql/mysql.sock' + socket : '/var/run/mysqld/mysql.sock' socket3: name : 'local' # user : '' # pass : '' + socket : '/var/lib/mysql/mysql.sock' + +socket4: + name : 'local' + # user : '' + # pass : '' socket : '/tmp/mysql.sock' tcp: @@ -146,12 +173,18 @@ socket2_root: name : 'local' user : 'root' # pass : '' - socket : '/var/lib/mysql/mysql.sock' + socket : '/var/run/mysqld/mysql.sock' socket3_root: name : 'local' user : 'root' # pass : '' + socket : '/var/lib/mysql/mysql.sock' + +socket4_root: + name : 'local' + user : 'root' + # pass : '' socket : '/tmp/mysql.sock' tcp_root: @@ -177,3 +210,63 @@ tcpipv6_root: host : '::1' port : '3306' + +# Now we try the same as above with user: netdata + +mycnf1_netdata: + name : 'local' + user : 'netdata' + 'my.cnf' : '/etc/my.cnf' + +mycnf2_netdata: + name : 'local' + user : 'netdata' + 'my.cnf' : '/etc/mysql/my.cnf' + +socket1_netdata: + name : 'local' + user : 'netdata' + # pass : '' + socket : '/var/run/mysqld/mysqld.sock' + +socket2_netdata: + name : 'local' + user : 'netdata' + # pass : '' + socket : '/var/run/mysqld/mysql.sock' + +socket3_netdata: + name : 'local' + user : 'netdata' + # pass : '' + socket : '/var/lib/mysql/mysql.sock' + +socket4_netdata: + name : 'local' + user : 'netdata' + # pass : '' + socket : '/tmp/mysql.sock' + +tcp_netdata: + name : 'local' + user : 'netdata' + # pass : '' + host : 'localhost' + port : '3306' + # keep in mind port might be ignored by mysql, if host = 'localhost' + # http://serverfault.com/questions/337818/how-to-force-mysql-to-connect-by-tcp-instead-of-a-unix-socket/337844#337844 + +tcpipv4_netdata: + name : 'local' + user : 'netdata' + # pass : '' + host : '127.0.0.1' + port : '3306' + +tcpipv6_netdata: + name : 'local' + user : 'netdata' + # pass : '' + host : '::1' + port : '3306' + diff --git a/conf.d/python.d/ovpn_status_log.conf b/conf.d/python.d/ovpn_status_log.conf new file mode 100644 index 000000000..39bc8e9d4 --- /dev/null +++ b/conf.d/python.d/ovpn_status_log.conf @@ -0,0 +1,86 @@ +# netdata python.d.plugin configuration for openvpn status log +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, openvpn status log also supports the following: +# +# log_path: 'PATH' # the path to openvpn status log file +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) +# +# IMPORTANT information +# +# 1. If you are running multiple OpenVPN instances out of the same directory, MAKE SURE TO EDIT DIRECTIVES which create output files +# so that multiple instances do not overwrite each other's output files. +# 2. Make sure NETDATA USER CAN READ openvpn-status.log +# +# * cd into directory with openvpn-status.log and run the following commands as root +# * #chown :netdata openvpn-status.log && chmod 640 openvpn-status.log +# * To check permission and group membership run +# * #ls -l openvpn-status.log +# -rw-r----- 1 root netdata 359 dec 21 21:22 openvpn-status.log +# +# 3. Update_every interval MUST MATCH interval on which OpenVPN writes operational status to log file. +# If its not true traffic chart WILL DISPLAY WRONG values +# +# Default OpenVPN update interval is 10 second on Debian 8 +# # ps -C openvpn -o command= +# /usr/sbin/openvpn --daemon ovpn-server --status /run/openvpn/server.status 10 --cd /etc/openvpn --config /etc/openvpn/server.conf +# +# +#default: +# log_path: '/var/log/openvpn-status.log' diff --git a/conf.d/python.d/postgres.conf b/conf.d/python.d/postgres.conf new file mode 100644 index 000000000..d4d2bafcc --- /dev/null +++ b/conf.d/python.d/postgres.conf @@ -0,0 +1,104 @@ +# netdata python.d.plugin configuration for postgresql +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# A single connection is required in order to pull statistics. +# +# Connections can be configured with the following options: +# +# database : 'example_db_name' +# user : 'example_user' +# password : 'example_pass' +# host : 'localhost' +# port : 5432 +# +# Additionally, the following options allow selective disabling of charts +# +# table_stats : false +# index_stats : false +# +# Postfix permissions are configured at its pg_hba.conf file. You can +# "trust" local clients to allow netdata to connect, or you can create +# a postgres user for netdata and add its password below to allow +# netdata connect. +# +# ---------------------------------------------------------------------- + +socket: + name : 'local' + user : 'postgres' + database : 'postgres' + +tcp: + name : 'local' + database : 'postgres' + user : 'postgres' + host : 'localhost' + port : 5432 + +tcpipv4: + name : 'local' + database : 'postgres' + user : 'postgres' + host : '127.0.0.1' + port : 5432 + +tcpipv6: + name : 'local' + database : 'postgres' + user : 'postgres' + host : '::1' + port : 5432 + diff --git a/conf.d/python.d/redis.conf b/conf.d/python.d/redis.conf index 9935bff77..983fbfbdb 100644 --- a/conf.d/python.d/redis.conf +++ b/conf.d/python.d/redis.conf @@ -56,12 +56,14 @@ # # Additionally to the above, redis also supports the following: # -# socket: 'path/to/mysql.sock' +# socket: 'path/to/redis.sock' # # or # host: 'IP or HOSTNAME' # the host to connect to # port: PORT # the port to connect to # +# and +# pass: 'password' # the redis password to use for AUTH command # # ---------------------------------------------------------------------- @@ -71,27 +73,33 @@ socket1: name : 'local' socket : '/tmp/redis.sock' + # pass : '' socket2: name : 'local' socket : '/var/run/redis/redis.sock' + # pass : '' socket3: name : 'local' socket : '/var/lib/redis/redis.sock' + # pass : '' localhost: name : 'local' host : 'localhost' port : 6379 + # pass : '' localipv4: name : 'local' host : '127.0.0.1' port : 6379 + # pass : '' localipv6: name : 'local' host : '::1' port : 6379 + # pass : '' diff --git a/conf.d/python.d/sensors.conf b/conf.d/python.d/sensors.conf index 7d895c348..2e9a41338 100644 --- a/conf.d/python.d/sensors.conf +++ b/conf.d/python.d/sensors.conf @@ -52,3 +52,7 @@ types: # # chip names can be found using the sensors shell command # the prefix is matched (anything that starts like that) +# +#---------------------------------------------------------------------- +# To change celsius to fahrenheit uncomment line below +#fahrenheit: True diff --git a/conf.d/python.d/varnish.conf b/conf.d/python.d/varnish.conf new file mode 100644 index 000000000..56dc6334d --- /dev/null +++ b/conf.d/python.d/varnish.conf @@ -0,0 +1,65 @@ +# netdata python.d.plugin configuration for varnish +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# +# +# The only you need is to add netdata to 'varnish' group +# +# Check it from cmd +# id netdata +# +# uid=999(netdata) gid=999(netdata) группы=999(netdata),118(varnish) +# |