diff options
Diffstat (limited to 'conf.d/python.d')
40 files changed, 791 insertions, 327 deletions
diff --git a/conf.d/python.d/apache.conf b/conf.d/python.d/apache.conf index 5b151ef7..3bbc3f78 100644 --- a/conf.d/python.d/apache.conf +++ b/conf.d/python.d/apache.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, apache also supports the following: # diff --git a/conf.d/python.d/beanstalk.conf b/conf.d/python.d/beanstalk.conf new file mode 100644 index 00000000..94080187 --- /dev/null +++ b/conf.d/python.d/beanstalk.conf @@ -0,0 +1,80 @@ +# netdata python.d.plugin configuration for beanstalk +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# chart_cleanup sets the default chart cleanup interval in iterations. +# A chart is marked as obsolete if it has not been updated +# 'chart_cleanup' iterations in a row. +# When a plugin sends the obsolete flag, the charts are not deleted +# from netdata immediately. +# They will be hidden immediately (not offered to dashboard viewer, +# streamed upstream and archived to backends) and deleted one hour +# later (configurable from netdata.conf). +# chart_cleanup: 10 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# chart_cleanup: 10 # the JOB's chart cleanup interval in iterations +# +# Additionally to the above, apache also supports the following: +# +# host: 'host' # Server ip address or hostname. Default: 127.0.0.1 +# port: port # Beanstalkd port. Default: +# +# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/bind_rndc.conf b/conf.d/python.d/bind_rndc.conf index e4f7ac82..71958ff9 100644 --- a/conf.d/python.d/bind_rndc.conf +++ b/conf.d/python.d/bind_rndc.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, bind_rndc also supports the following: # @@ -75,7 +82,7 @@ # chown bind bind/ # # 4. RELOAD (NOT restart) BIND -# systemctl reload bind9.serice +# systemctl reload bind9.service # # 5. Run as a root 'rndc stats' to dump (BIND will create named.stats in new directory) # @@ -101,9 +108,5 @@ # To test your logrotate conf file run as root: # # logrotate /etc/logrotate.d/bind-rndc -d (debug dry-run mode) -# ------------------------------------------------------------------------------------------------------------------ -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) # -#local: -# named_stats_path: '/var/log/bind/named.stats' +# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/chrony.conf b/conf.d/python.d/chrony.conf index 46229687..9ac906b5 100644 --- a/conf.d/python.d/chrony.conf +++ b/conf.d/python.d/chrony.conf @@ -31,7 +31,13 @@ update_every: 5 # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ update_every: 5 # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, chrony also supports the following: # diff --git a/conf.d/python.d/couchdb.conf b/conf.d/python.d/couchdb.conf new file mode 100644 index 00000000..5f6e75cf --- /dev/null +++ b/conf.d/python.d/couchdb.conf @@ -0,0 +1,91 @@ +# netdata python.d.plugin configuration for couchdb +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# By default, CouchDB only updates its stats every 10 seconds. +update_every: 10 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# +# Additionally to the above, the couchdb plugin also supports the following: +# +# host: 'ipaddress' # Server ip address or hostname. Default: 127.0.0.1 +# port: 'port' # CouchDB port. Default: 15672 +# scheme: 'scheme' # http or https. Default: http +# node: 'couchdb@127.0.0.1' # CouchDB node name. Same as -name vm.args argument. +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# +# if db-specific stats are desired, place their names in databases: +# databases: 'npm-registry animaldb' +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) +# +localhost: + name: 'local' + host: '127.0.0.1' + port: '5984' + node: 'couchdb@127.0.0.1' + scheme: 'http' +# user: 'admin' +# pass: 'password' diff --git a/conf.d/python.d/cpufreq.conf b/conf.d/python.d/cpufreq.conf index 10c96917..0890245d 100644 --- a/conf.d/python.d/cpufreq.conf +++ b/conf.d/python.d/cpufreq.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # The directory to search for the file scaling_cur_freq sys_dir: "/sys/devices" diff --git a/conf.d/python.d/dns_query_time.conf b/conf.d/python.d/dns_query_time.conf index f4d4dbf9..d32c6db8 100644 --- a/conf.d/python.d/dns_query_time.conf +++ b/conf.d/python.d/dns_query_time.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,26 +53,19 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, dns_query_time also supports the following: # -# dns_servers: 'dns servers' # list of dns servers to query -# domains: 'domains' # list of domains -# aggregate: yes/no # Default: yes. Aggregate all servers in one chart or not -# response_timeout: 4 # Defalt: 4. Dns query response timeout (query = -100 if response time > response_time) -# -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) -# +# dns_servers: 'dns servers' # List of dns servers to query +# domains: 'domains' # List of domains +# aggregate: yes/no # Aggregate all servers in one chart or not +# response_timeout: 4 # Dns query response timeout (query = -100 if response time > response_time) # -#aggregate: yes -#dns_servers: '8.8.8.8 8.8.4.4' -#domains: 'python.org distrowatch.com linuxmint.com linux.com rsyslog.com liblognorm.com archlinux.org cisco.com debian.org kernel.org gns3.com opera.com github.com youtube.com amazon.co.uk kde.org netdata.firehol.org ubuntu.com redhat.com opensuse.org wireshark.org vmware.com microsoft.com elastic.co' +# ----------------------------------------------------------------------
\ No newline at end of file diff --git a/conf.d/python.d/dnsdist.conf b/conf.d/python.d/dnsdist.conf new file mode 100644 index 00000000..aec58b8e --- /dev/null +++ b/conf.d/python.d/dnsdist.conf @@ -0,0 +1,85 @@ +# netdata python.d.plugin configuration for dnsdist +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +#update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +#retries: 600000 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +#autodetection_retry: 1 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds +# +# +# Additionally to the above, dnsdist also supports the following: +# +# url: 'URL' # the URL to fetch dnsdist performance statistics +# user: 'username' # username for basic auth +# pass: 'password' # password for basic auth +# header: +# X-API-Key: 'Key' # API key +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +# localhost: +# name : 'local' +# url : 'http://127.0.0.1:5053/jsonstat?command=stats' +# user : 'username' +# pass : 'password' +# header: +# X-API-Key: 'dnsdist-api-key' + + diff --git a/conf.d/python.d/dovecot.conf b/conf.d/python.d/dovecot.conf index 917c5272..56c39499 100644 --- a/conf.d/python.d/dovecot.conf +++ b/conf.d/python.d/dovecot.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, dovecot also supports the following: # diff --git a/conf.d/python.d/elasticsearch.conf b/conf.d/python.d/elasticsearch.conf index 7c35df22..213843bf 100644 --- a/conf.d/python.d/elasticsearch.conf +++ b/conf.d/python.d/elasticsearch.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, elasticsearch plugin also supports the following: # diff --git a/conf.d/python.d/example.conf b/conf.d/python.d/example.conf index 31f9a49a..e7fed9b5 100644 --- a/conf.d/python.d/example.conf +++ b/conf.d/python.d/example.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, example also supports the following: # diff --git a/conf.d/python.d/exim.conf b/conf.d/python.d/exim.conf index 07d72c5a..2add7b2c 100644 --- a/conf.d/python.d/exim.conf +++ b/conf.d/python.d/exim.conf @@ -32,7 +32,13 @@ update_every: 10 # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -48,12 +54,13 @@ update_every: 10 # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, exim also supports the following: # diff --git a/conf.d/python.d/fail2ban.conf b/conf.d/python.d/fail2ban.conf index 76277108..60ca8723 100644 --- a/conf.d/python.d/fail2ban.conf +++ b/conf.d/python.d/fail2ban.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,17 +53,18 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, fail2ban also supports the following: # -# log_path: 'path to fail2ban.log' # Default: '/var/log/fail2ban.log' -# conf_path: 'path to jail.local/jail.conf' # Default: '/etc/fail2ban/jail.local' -# conf_dir: 'path to jail.d/' # Default: '/etc/fail2ban/jail.d/' -# exclude: 'jails you want to exclude from autodetection' # Default: '[]' empty list +# log_path: 'path to fail2ban.log' # Default: '/var/log/fail2ban.log' +# conf_path: 'path to jail.local/jail.conf' # Default: '/etc/fail2ban/jail.local' +# conf_dir: 'path to jail.d/' # Default: '/etc/fail2ban/jail.d/' +# exclude: 'jails you want to exclude from autodetection' # Default: none #------------------------------------------------------------------------------------------------------------------ diff --git a/conf.d/python.d/freeradius.conf b/conf.d/python.d/freeradius.conf index b2c8abf6..3336d4c4 100644 --- a/conf.d/python.d/freeradius.conf +++ b/conf.d/python.d/freeradius.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,21 +53,22 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, freeradius also supports the following: # -# host: 'host' # Default: 'localhost'. Server ip address or hostname. -# port: 'port' # Default: '18121'. Port on which freeradius server listen (type = status). +# host: 'host' # Default: 'localhost'. Server ip address or hostname. +# port: 'port' # Default: '18121'. Port on which freeradius server listen (type = status). # secret: 'secret' # Default: 'adminsecret'. -# acct: True/False # Defalt: False. Freeradius accounting statistics. -# proxy_auth: True/False # Default: False. Freeradius proxy authentication statistics. -# proxy_acct: True/False # Default: False. Freeradius proxy accounting statistics. +# acct: yes/no # Default: no. Freeradius accounting statistics. +# proxy_auth: yes/no # Default: no. Freeradius proxy authentication statistics. +# proxy_acct: yes/no # Default: no. Freeradius proxy accounting statistics. # # ------------------------------------------------------------------------------------------------------------------ # Freeradius server configuration: @@ -73,14 +80,3 @@ # ln -s ../sites-available/status status # and restart/reload your FREERADIUS server. # ------------------------------------------------------------------------------------------------------------------ -# -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -local: - host: 'localhost' - port: '18121' - secret: 'adminsecret' -#acct: False -#proxy_auth: False -#proxy_acct: False diff --git a/conf.d/python.d/go_expvar.conf b/conf.d/python.d/go_expvar.conf index 5be4890d..c352b167 100644 --- a/conf.d/python.d/go_expvar.conf +++ b/conf.d/python.d/go_expvar.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -42,19 +48,17 @@ # predefined parameters. These are: # # job_name: -# name: my_name # the JOB's name as it will appear at the -# # dashboard. If name: is not supplied the -# # job_name: will be used (use _ for spaces) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, this plugin also supports the following: # # url: 'http://127.0.0.1/debug/vars' # the URL of the expvar endpoint -# ss_cert: # ignore HTTPS self-signed certificate -# proxy: # use HTTP proxy # # As the plugin cannot possibly know the port your application listens on, there is no default value. Please include # the whole path of the endpoint, as the expvar handler can be installed in a non-standard location. diff --git a/conf.d/python.d/haproxy.conf b/conf.d/python.d/haproxy.conf index a9e04879..a40dd76a 100644 --- a/conf.d/python.d/haproxy.conf +++ b/conf.d/python.d/haproxy.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, haproxy also supports the following: # diff --git a/conf.d/python.d/hddtemp.conf b/conf.d/python.d/hddtemp.conf index f74a0980..9165798a 100644 --- a/conf.d/python.d/hddtemp.conf +++ b/conf.d/python.d/hddtemp.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,18 +53,18 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, hddtemp also supports the following: # # host: 'IP or HOSTNAME' # the host to connect to # port: PORT # the port to connect to -# fahrenheit: True/False # fahrenheit instead of celsius. Default is False # # By default this module will try to autodetect disks @@ -78,13 +84,11 @@ localhost: name: 'local' host: 'localhost' - fahrenheit: False port: 7634 localipv4: name: 'local' host: '127.0.0.1' - fahrenheit: False port: 7634 localipv6: diff --git a/conf.d/python.d/ipfs.conf b/conf.d/python.d/ipfs.conf index e039026c..c247c1b7 100644 --- a/conf.d/python.d/ipfs.conf +++ b/conf.d/python.d/ipfs.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, ipfs also supports the following: # diff --git a/conf.d/python.d/isc_dhcpd.conf b/conf.d/python.d/isc_dhcpd.conf index 938ca6e7..4a4c4a5e 100644 --- a/conf.d/python.d/isc_dhcpd.conf +++ b/conf.d/python.d/isc_dhcpd.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, isc_dhcpd supports the following: # @@ -71,13 +78,4 @@ # This is the default, so it will work in most cases. # 3. Pools MUST BE in CIDR format. # -#----------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# This is disabled by default. -# To enable it, uncomment the following. -# -#leases: -# leases_path : '/var/lib/dhcp/dhcpd.leases' -# pools: -# office: '192.168.2.0/24' -# wifi: '192.168.3.0/24' +# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/mdstat.conf b/conf.d/python.d/mdstat.conf index c89d463b..66a2f153 100644 --- a/conf.d/python.d/mdstat.conf +++ b/conf.d/python.d/mdstat.conf @@ -23,4 +23,10 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 diff --git a/conf.d/python.d/memcached.conf b/conf.d/python.d/memcached.conf index f1723dc8..85c3daf6 100644 --- a/conf.d/python.d/memcached.conf +++ b/conf.d/python.d/memcached.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, memcached also supports the following: # diff --git a/conf.d/python.d/mongodb.conf b/conf.d/python.d/mongodb.conf index a19b6570..62faef68 100644 --- a/conf.d/python.d/mongodb.conf +++ b/conf.d/python.d/mongodb.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, mongodb also supports the following: # diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf index 63d63517..def9f7e9 100644 --- a/conf.d/python.d/mysql.conf +++ b/conf.d/python.d/mysql.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, mysql also supports the following: # diff --git a/conf.d/python.d/nginx.conf b/conf.d/python.d/nginx.conf index 645925a5..71c52106 100644 --- a/conf.d/python.d/nginx.conf +++ b/conf.d/python.d/nginx.conf @@ -43,7 +43,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -59,13 +65,13 @@ # predefined parameters. These are: # # job_name: -# name: my_name # the JOB's name as it will appear at the -# # dashboard. If name: is not supplied the -# # job_name: will be used (use _ for spaces) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, this plugin also supports the following: # @@ -99,5 +105,5 @@ localipv4: localipv6: name : 'local' - url : 'http://::1/stub_status' + url : 'http://[::1]/stub_status' diff --git a/conf.d/python.d/nsd.conf b/conf.d/python.d/nsd.conf index 7566fe85..078e9721 100644 --- a/conf.d/python.d/nsd.conf +++ b/conf.d/python.d/nsd.conf @@ -32,7 +32,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -48,12 +54,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, nsd also supports the following: # diff --git a/conf.d/python.d/ovpn_status_log.conf b/conf.d/python.d/ovpn_status_log.conf index 39bc8e9d..907f014f 100644 --- a/conf.d/python.d/ovpn_status_log.conf +++ b/conf.d/python.d/ovpn_status_log.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, openvpn status log also supports the following: # @@ -84,3 +91,5 @@ # #default: # log_path: '/var/log/openvpn-status.log' +# +# ----------------------------------------------------------------------
\ No newline at end of file diff --git a/conf.d/python.d/phpfpm.conf b/conf.d/python.d/phpfpm.conf index f5d067cc..08688e2f 100644 --- a/conf.d/python.d/phpfpm.conf +++ b/conf.d/python.d/phpfpm.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, PHP-FPM also supports the following: # diff --git a/conf.d/python.d/postfix.conf b/conf.d/python.d/postfix.conf index ca9d8fad..e0d5a5f8 100644 --- a/conf.d/python.d/postfix.conf +++ b/conf.d/python.d/postfix.conf @@ -32,7 +32,13 @@ update_every: 10 # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -48,12 +54,13 @@ update_every: 10 # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, postfix also supports the following: # diff --git a/conf.d/python.d/postgres.conf b/conf.d/python.d/postgres.conf index 1dbb64f4..3a70a718 100644 --- a/conf.d/python.d/postgres.conf +++ b/conf.d/python.d/postgres.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # A single connection is required in order to pull statistics. # @@ -70,7 +77,7 @@ # index_stats : false # database_poll : 'dbase_name1 dbase_name2' # poll only specified databases (all other will be excluded from charts) # -# Postfix permissions are configured at its pg_hba.conf file. You can +# Postgres permissions are configured at its pg_hba.conf file. You can # "trust" local clients to allow netdata to connect, or you can create # a postgres user for netdata and add its password below to allow # netdata connect. diff --git a/conf.d/python.d/apache_cache.conf b/conf.d/python.d/powerdns.conf index 98eecd0e..ca6200df 100644 --- a/conf.d/python.d/apache_cache.conf +++ b/conf.d/python.d/powerdns.conf @@ -1,4 +1,4 @@ -# netdata python.d.plugin configuration for apache cache +# netdata python.d.plugin configuration for powerdns # # This file is in YaML format. Generally the format is: # @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,30 +53,26 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # -# Additionally to the above, apache_cache also supports the following: +# Additionally to the above, apache also supports the following: # -# path: 'PATH' # the path to apache's cache.log +# url: 'URL' # the URL to fetch powerdns performance statistics +# header: +# X-API-Key: 'Key' # API key # - # ---------------------------------------------------------------------- # AUTO-DETECTION JOBS # only one of them will run (they have the same name) -apache: - name: 'local' - path: '/var/log/apache/cache.log' - -apache2: - name: 'local' - path: '/var/log/apache2/cache.log' - -httpd: - name: 'local' - path: '/var/log/httpd/cache.log' +# localhost: +# name : 'local' +# url : 'http://127.0.0.1:8081/api/v1/servers/localhost/statistics' +# header: +# X-API-Key: 'change_me' diff --git a/conf.d/python.d/rabbitmq.conf b/conf.d/python.d/rabbitmq.conf index eccf65df..3f90da8a 100644 --- a/conf.d/python.d/rabbitmq.conf +++ b/conf.d/python.d/rabbitmq.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, rabbitmq plugin also supports the following: # diff --git a/conf.d/python.d/redis.conf b/conf.d/python.d/redis.conf index 983fbfbd..6363f6da 100644 --- a/conf.d/python.d/redis.conf +++ b/conf.d/python.d/redis.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, redis also supports the following: # diff --git a/conf.d/python.d/retroshare.conf b/conf.d/python.d/retroshare.conf index 79614373..9c92583f 100644 --- a/conf.d/python.d/retroshare.conf +++ b/conf.d/python.d/retroshare.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, RetroShare also supports the following: # diff --git a/conf.d/python.d/samba.conf b/conf.d/python.d/samba.conf index 865281cd..ee513c60 100644 --- a/conf.d/python.d/samba.conf +++ b/conf.d/python.d/samba.conf @@ -31,7 +31,13 @@ update_every: 5 # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,10 @@ update_every: 5 # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts -# -# - +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds
\ No newline at end of file diff --git a/conf.d/python.d/sensors.conf b/conf.d/python.d/sensors.conf index 2e9a4133..83bbffd7 100644 --- a/conf.d/python.d/sensors.conf +++ b/conf.d/python.d/sensors.conf @@ -23,7 +23,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # Limit the number of sensors types. @@ -54,5 +60,4 @@ types: # the prefix is matched (anything that starts like that) # #---------------------------------------------------------------------- -# To change celsius to fahrenheit uncomment line below -#fahrenheit: True + diff --git a/conf.d/python.d/smartd_log.conf b/conf.d/python.d/smartd_log.conf index 8764ffd3..3fab3f1c 100644 --- a/conf.d/python.d/smartd_log.conf +++ b/conf.d/python.d/smartd_log.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,18 +53,20 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, smartd_log also supports the following: # -# log_path: '/path/to/smartdlogs' # path to smartd log files. Default is /var/log/smartd -# raw_values: no # raw or normalized values on charts. Default is normalized. -# smart_attributes: '1 2 3 4 44' # smart attributes charts. Default are ['1', '4', '5', '7', '9', '12', '193', '194', '197', '198', '200']. +# log_path: '/path/to/smartdlogs' # path to smartd log files. Default is /var/log/smartd +# raw_values: yes # enable/disable raw values charts. Enabled by default. +# smart_attributes: '1 2 3 4 44' # smart attributes charts. Default are ['1', '4', '5', '7', '9', '12', '193', '194', '197', '198', '200']. +# exclude_disks: 'PATTERN1 PATTERN2' # space separated patterns. If the pattern is in the drive name, the module will not collect data for it. # # ---------------------------------------------------------------------- # Additional information @@ -79,7 +87,4 @@ # Some raw numbers provide valuable insight when properly interpreted. These cases will be discussed later on. # Raw values are typically listed in hexadecimal numbers. The raw value has different structure for different vendors and is often not meaningful as a decimal number. # -# -# JOB configuration -# -log_path: '/var/log/smartd' +# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/squid.conf b/conf.d/python.d/squid.conf index 27800bde..564187f0 100644 --- a/conf.d/python.d/squid.conf +++ b/conf.d/python.d/squid.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, squid also supports the following: # diff --git a/conf.d/python.d/tomcat.conf b/conf.d/python.d/tomcat.conf index ce89175f..c63f06cf 100644 --- a/conf.d/python.d/tomcat.conf +++ b/conf.d/python.d/tomcat.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,12 +53,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, tomcat also supports the following: # diff --git a/conf.d/python.d/varnish.conf b/conf.d/python.d/varnish.conf index c25f3010..4b069d51 100644 --- a/conf.d/python.d/varnish.conf +++ b/conf.d/python.d/varnish.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -47,11 +53,12 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts -# +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # +# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf index cd1f1af0..dd1fff07 100644 --- a/conf.d/python.d/web_log.conf +++ b/conf.d/python.d/web_log.conf @@ -31,7 +31,13 @@ # If unset, the default for python.d.plugin is used. # Attempts to restore the service are made once every update_every # and only if the module has collected values in the past. -# retries: 5 +# retries: 60 + +# autodetection_retry sets the job re-check interval in seconds. +# The job is not deleted if check fails. +# Attempts to start the job are made once every autodetection_retry. +# This feature is disabled by default. +# autodetection_retry: 0 # ---------------------------------------------------------------------- # JOBS (data collection sources) @@ -50,12 +56,13 @@ # predefined parameters. These are: # # job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 5 # the JOB's number of restoration attempts +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 60 # the JOB's number of restoration attempts +# autodetection_retry: 0 # the JOB's re-check interval in seconds # # Additionally to the above, web_log also supports the following: # |