diff options
Diffstat (limited to '')
36 files changed, 2292 insertions, 68 deletions
diff --git a/conf.d/Makefile.am b/conf.d/Makefile.am index 381b546e3..02fe86b01 100644 --- a/conf.d/Makefile.am +++ b/conf.d/Makefile.am @@ -6,4 +6,52 @@ MAINTAINERCLEANFILES= $(srcdir)/Makefile.in dist_config_DATA = \ apps_groups.conf \ charts.d.conf \ + python.d.conf \ + $(NULL) + +chartsconfigdir=$(configdir)/charts.d +dist_chartsconfig_DATA = \ + $(NULL) + +nodeconfigdir=$(configdir)/node.d +dist_nodeconfig_DATA = \ + $(NULL) + +pythonconfigdir=$(configdir)/python.d +dist_pythonconfig_DATA = \ + python.d/apache.conf \ + python.d/apache_cache.conf \ + python.d/cpufreq.conf \ + python.d/dovecot.conf \ + python.d/example.conf \ + python.d/exim.conf \ + python.d/hddtemp.conf \ + python.d/ipfs.conf \ + python.d/memcached.conf \ + python.d/mysql.conf \ + python.d/nginx.conf \ + python.d/nginx_log.conf \ + python.d/phpfpm.conf \ + python.d/postfix.conf \ + python.d/redis.conf \ + python.d/sensors.conf \ + python.d/squid.conf \ + python.d/tomcat.conf \ + $(NULL) + +healthconfigdir=$(configdir)/health.d +dist_healthconfig_DATA = \ + health.d/apache.conf \ + health.d/cpu.conf \ + health.d/disks.conf \ + health.d/entropy.conf \ + health.d/memcached.conf \ + health.d/named.conf \ + health.d/net.conf \ + health.d/nginx.conf \ + health.d/qos.conf \ + health.d/ram.conf \ + health.d/redis.conf \ + health.d/swap.conf \ + health.d/squid.conf \ $(NULL) diff --git a/conf.d/Makefile.in b/conf.d/Makefile.in index 1938bd940..9356f60e2 100644 --- a/conf.d/Makefile.in +++ b/conf.d/Makefile.in @@ -80,7 +80,9 @@ build_triplet = @build@ host_triplet = @host@ subdir = conf.d DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(dist_config_DATA) + $(dist_chartsconfig_DATA) $(dist_config_DATA) \ + $(dist_healthconfig_DATA) $(dist_nodeconfig_DATA) \ + $(dist_pythonconfig_DATA) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_pthread.m4 \ $(top_srcdir)/configure.ac @@ -136,8 +138,12 @@ am__uninstall_files_from_dir = { \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } -am__installdirs = "$(DESTDIR)$(configdir)" -DATA = $(dist_config_DATA) +am__installdirs = "$(DESTDIR)$(chartsconfigdir)" \ + "$(DESTDIR)$(configdir)" "$(DESTDIR)$(healthconfigdir)" \ + "$(DESTDIR)$(nodeconfigdir)" "$(DESTDIR)$(pythonconfigdir)" +DATA = $(dist_chartsconfig_DATA) $(dist_config_DATA) \ + $(dist_healthconfig_DATA) $(dist_nodeconfig_DATA) \ + $(dist_pythonconfig_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ @@ -261,6 +267,8 @@ pluginsdir = @pluginsdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +pythondir = @pythondir@ +registrydir = @registrydir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -279,6 +287,54 @@ MAINTAINERCLEANFILES = $(srcdir)/Makefile.in dist_config_DATA = \ apps_groups.conf \ charts.d.conf \ + python.d.conf \ + $(NULL) + +chartsconfigdir = $(configdir)/charts.d +dist_chartsconfig_DATA = \ + $(NULL) + +nodeconfigdir = $(configdir)/node.d +dist_nodeconfig_DATA = \ + $(NULL) + +pythonconfigdir = $(configdir)/python.d +dist_pythonconfig_DATA = \ + python.d/apache.conf \ + python.d/apache_cache.conf \ + python.d/cpufreq.conf \ + python.d/dovecot.conf \ + python.d/example.conf \ + python.d/exim.conf \ + python.d/hddtemp.conf \ + python.d/ipfs.conf \ + python.d/memcached.conf \ + python.d/mysql.conf \ + python.d/nginx.conf \ + python.d/nginx_log.conf \ + python.d/phpfpm.conf \ + python.d/postfix.conf \ + python.d/redis.conf \ + python.d/sensors.conf \ + python.d/squid.conf \ + python.d/tomcat.conf \ + $(NULL) + +healthconfigdir = $(configdir)/health.d +dist_healthconfig_DATA = \ + health.d/apache.conf \ + health.d/cpu.conf \ + health.d/disks.conf \ + health.d/entropy.conf \ + health.d/memcached.conf \ + health.d/named.conf \ + health.d/net.conf \ + health.d/nginx.conf \ + health.d/qos.conf \ + health.d/ram.conf \ + health.d/redis.conf \ + health.d/swap.conf \ + health.d/squid.conf \ $(NULL) all: all-am @@ -314,6 +370,27 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): +install-dist_chartsconfigDATA: $(dist_chartsconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(chartsconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(chartsconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsconfigdir)" || exit $$?; \ + done + +uninstall-dist_chartsconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(chartsconfigdir)'; $(am__uninstall_files_from_dir) install-dist_configDATA: $(dist_config_DATA) @$(NORMAL_INSTALL) @list='$(dist_config_DATA)'; test -n "$(configdir)" || list=; \ @@ -335,6 +412,69 @@ uninstall-dist_configDATA: @list='$(dist_config_DATA)'; test -n "$(configdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(configdir)'; $(am__uninstall_files_from_dir) +install-dist_healthconfigDATA: $(dist_healthconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_healthconfig_DATA)'; test -n "$(healthconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(healthconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(healthconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(healthconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(healthconfigdir)" || exit $$?; \ + done + +uninstall-dist_healthconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_healthconfig_DATA)'; test -n "$(healthconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(healthconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_nodeconfigDATA: $(dist_nodeconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_nodeconfig_DATA)'; test -n "$(nodeconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(nodeconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(nodeconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(nodeconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(nodeconfigdir)" || exit $$?; \ + done + +uninstall-dist_nodeconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_nodeconfig_DATA)'; test -n "$(nodeconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(nodeconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_pythonconfigDATA: $(dist_pythonconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_pythonconfig_DATA)'; test -n "$(pythonconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pythonconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pythonconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pythonconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pythonconfigdir)" || exit $$?; \ + done + +uninstall-dist_pythonconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_pythonconfig_DATA)'; test -n "$(pythonconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pythonconfigdir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: @@ -376,7 +516,7 @@ check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: - for dir in "$(DESTDIR)$(configdir)"; do \ + for dir in "$(DESTDIR)$(chartsconfigdir)" "$(DESTDIR)$(configdir)" "$(DESTDIR)$(healthconfigdir)" "$(DESTDIR)$(nodeconfigdir)" "$(DESTDIR)$(pythonconfigdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am @@ -430,7 +570,9 @@ info: info-am info-am: -install-data-am: install-dist_configDATA +install-data-am: install-dist_chartsconfigDATA install-dist_configDATA \ + install-dist_healthconfigDATA install-dist_nodeconfigDATA \ + install-dist_pythonconfigDATA install-dvi: install-dvi-am @@ -474,21 +616,27 @@ ps: ps-am ps-am: -uninstall-am: uninstall-dist_configDATA +uninstall-am: uninstall-dist_chartsconfigDATA \ + uninstall-dist_configDATA uninstall-dist_healthconfigDATA \ + uninstall-dist_nodeconfigDATA uninstall-dist_pythonconfigDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic cscopelist-am \ ctags-am distclean distclean-generic distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ - install-data-am install-dist_configDATA install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \ - uninstall-am uninstall-dist_configDATA + install-data-am install-dist_chartsconfigDATA \ + install-dist_configDATA install-dist_healthconfigDATA \ + install-dist_nodeconfigDATA install-dist_pythonconfigDATA \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags-am \ + uninstall uninstall-am uninstall-dist_chartsconfigDATA \ + uninstall-dist_configDATA uninstall-dist_healthconfigDATA \ + uninstall-dist_nodeconfigDATA uninstall-dist_pythonconfigDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/conf.d/apps_groups.conf b/conf.d/apps_groups.conf index 887563c44..0a6f55cd7 100644 --- a/conf.d/apps_groups.conf +++ b/conf.d/apps_groups.conf @@ -28,7 +28,7 @@ # *name* substring mode: will search for 'name' in the whole command line (/proc/PID/cmdline) # # If you enter even just one *name* (substring), apps.plugin will process -# /proc/PID/cmdline for all processes, on every iteration. +# /proc/PID/cmdline for all processes, just once (when they are first seen). # # To add process names with single quotes, enclose them in double quotes # example: "process with this ' single quote" @@ -44,53 +44,176 @@ # You can add any number of groups you like. Only the ones found running will # affect the charts generated. However, producing charts with hundreds of # dimensions may slow down your web browser. +# +# The order of the entries in this list is important: the first that matches +# a process is used, so put important ones at the top. Processes not matched +# by any row, will inherit it from their parents or children. +# +# The order also controls the order of the dimensions on the generated charts +# (although applications started after apps.plugin is started, will be appended +# to the existing list of dimensions the netdata daemon maintains). + +# ----------------------------------------------------------------------------- +# NETDATA processes accounting + +# netdata main process +netdata: netdata + +# netdata known plugins +# plugins not defined here will be accumulated in netdata, above +apps.plugin: apps.plugin +charts.d.plugin: *charts.d.plugin* +node.d.plugin: *node.d.plugin* +python.d.plugin: *python.d.plugin* +tc-qos-helper: *tc-qos-helper.sh* -compile: cc1 cc1plus as gcc* ld make automake autoconf git -rsync: rsync -media: mplayer vlc xine mediatomb omxplayer* kodi* xbmc* mediacenter eventlircd -squid: squid* c-icap -apache: apache* httpd -mysql: mysql* -asterisk: asterisk -opensips: opensips* stund -radius: radius* +# ----------------------------------------------------------------------------- +# authentication/authorization related servers + +auth: radius* openldap* ldap* fail2ban: fail2ban* -mail: dovecot imapd pop3d -postfix: master -nginx: nginx + +# ----------------------------------------------------------------------------- +# web/ftp servers + +httpd: apache* httpd nginx* lighttpd +proxy: squid* c-icap squidGuard varnish* +php: php* +ftpd: proftpd in.tftpd vsftpd +uwsgi: uwsgi +unicorn: *unicorn* + +# ----------------------------------------------------------------------------- +# database servers + +sql: mysqld* mariad* postgres* +nosql: mongod redis* + +# ----------------------------------------------------------------------------- +# email servers + +email: dovecot imapd pop3d amavis* master zmstat* zmmailboxdmgr qmgr oqmgr + +# ----------------------------------------------------------------------------- +# networking and VPN servers + +ppp: ppp* +vpn: openvpn pptp* cjdroute +wifi: hostapd wpa_supplicant + +# ----------------------------------------------------------------------------- +# high availability and balancers + +camo: *camo* +balancer: ipvs_* haproxy +ha: corosync hs_logd ha_logd stonithd + +# ----------------------------------------------------------------------------- +# telephony + +pbx: asterisk safe_asterisk *vicidial* +sip: opensips* stund +murmur: murmurd +vines: *vines* + +# ----------------------------------------------------------------------------- +# monitoring + +logs: ulogd* syslog* rsyslog* logrotate +nms: snmpd vnstatd smokeping zabbix* monit munin* mon openhpid watchdog tailon nrpe splunk: splunkd -mongo: mongod -lighttpd: lighttpd -ftpd: proftpd in.tftpd + +# ----------------------------------------------------------------------------- +# file systems and file servers + samba: smbd nmbd winbindd nfs: rpcbind rpc.* nfs* +zfs: spl_* z_* txg_* zil_* arc_* l2arc* +btrfs: btrfs* + +# ----------------------------------------------------------------------------- +# containers & virtual machines + +containers: lxc* docker* +VMs: vbox* VBox* qemu* + +# ----------------------------------------------------------------------------- +# ssh servers and clients + ssh: ssh* scp -X: X lightdm xdm pulseaudio gkrellm -xfce: xfwm4 xfdesktop xfce* Thunar xfsettingsd -gnome: gnome-* gdm gconfd-2 -named: named rncd -clam: clam* *clam -cups: cups* -ntp: ntp* -deluge: deluge* -vbox: vbox* VBox* -log: ulogd syslog* rsyslog* logrotate -nms: snmpd vnstatd smokeping zabbix* monit munin* mon openhpid -ppp: ppp* pptp* -inetd: inetd xinetd -openvpn: openvpn -cjdns: cjdroute -cron: cron atd -ha: corosync hs_logd ha_logd stonithd -ipvs: ipvs_* + +# ----------------------------------------------------------------------------- +# print servers and clients + +print: cups* lpd lpq + +# ----------------------------------------------------------------------------- +# time servers and clients + +time: ntp* + +# ----------------------------------------------------------------------------- +# dhcp servers and clients + +dhcp: *dhcp* + +# ----------------------------------------------------------------------------- +# name servers and clients + +named: named rncd dig + +# ----------------------------------------------------------------------------- +# installation / compilation / debugging + +build: cc1 cc1plus as gcc* ld make automake autoconf autoreconf git valgrind* + +# ----------------------------------------------------------------------------- +# antivirus + +antivirus: clam* *clam + +# ----------------------------------------------------------------------------- +# torrent clients + +torrents: *deluge* transmission* *SickBeard* + +# ----------------------------------------------------------------------------- +# backup servers and clients + +backup: rsync bacula* + +# ----------------------------------------------------------------------------- +# cron + +cron: cron atd anacron + +# ----------------------------------------------------------------------------- +# UPS + +ups: upsmon upsd */nut/* + +# ----------------------------------------------------------------------------- +# Kernel / System + +system: systemd* udisks* udevd* *udevd connmand ipv6_addrconf dbus-* inetd xinetd mdadm kernel: kthreadd kauditd lockd khelper kdevtmpfs khungtaskd rpciod fsnotify_mark kthrotld iscsi_eh deferwq -netdata: netdata -crsproxy: crsproxy -wifi: hostapd wpa_supplicant -system: systemd* udisks* udevd connmand ipv6_addrconf dbus-* ksmd: ksmd -lxc: lxc* -zfs-spl: spl_* -zfs-posix: z_* -zfs-txg: txg_* zil_* -zfs-arc: arc_* l2arc* + +# ----------------------------------------------------------------------------- +# media players, servers, clients + +media: mplayer vlc xine mediatomb omxplayer* kodi* xbmc* mediacenter eventlircd mpd minidlnad mt-daapd avahi* + +# ----------------------------------------------------------------------------- +# X + +X: X lightdm xdm pulseaudio gkrellm xfwm4 xfdesktop xfce* Thunar xfsettingsd xfconfd gnome-* gdm gconfd-2 *gvfsd gvfsd* kdm slim + +# ----------------------------------------------------------------------------- +# other application servers + +crsproxy: crsproxy +sidekiq: *sidekiq* +java: java +chat: irssi +ipfs: ipfs diff --git a/conf.d/charts.d.conf b/conf.d/charts.d.conf index daec33251..acb2a6fae 100644 --- a/conf.d/charts.d.conf +++ b/conf.d/charts.d.conf @@ -29,14 +29,35 @@ # ----------------------------------------------------------------------------- # the default enable/disable for all charts.d collectors -#enable_all_charts="yes" - -# per charts.d collector enable/disable -#nut=yes -#squid=yes -#postfix=yes -#sensors=yes -#cpufreq=yes -#mysql=yes -#example=yes -#load_average=yes +# the default is "yes" +# enable_all_charts="yes" + +# BY DEFAULT ENABLED MODULES +# ap=yes +# nut=yes +# opensips=yes + +# ----------------------------------------------------------------------------- +# THESE NEED TO BE SET TO "force" TO BE ENABLED + +# Nothing useful. +# Just an example charts.d plugin you can use as a template. +# example=force + +# OLD MODULES THAT ARE NOW SERVED BY python.d.plugin +# apache=force +# cpufreq=force +# exim=force +# hddtemp=force +# mysql=force +# nginx=force +# phpfpm=force +# postfix=force +# sensors=force +# squid=force +# tomcat=force + +# OLD MODULES THAT ARE NOW SERVED BY NETDATA DAEMON +# cpu_apps=force +# mem_apps=force +# load_average=force diff --git a/conf.d/health.d/apache.conf b/conf.d/health.d/apache.conf new file mode 100644 index 000000000..1fddbc99f --- /dev/null +++ b/conf.d/health.d/apache.conf @@ -0,0 +1,13 @@ + +# make sure apache is running + +template: apache_last_collected_secs + on: apache.requests + calc: $now - $last_collected_t + every: 10s + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) + units: seconds ago + info: number of seconds since the last successful data collection + + diff --git a/conf.d/health.d/cpu.conf b/conf.d/health.d/cpu.conf new file mode 100644 index 000000000..9332e508a --- /dev/null +++ b/conf.d/health.d/cpu.conf @@ -0,0 +1,24 @@ + +template: 5min_cpu_pcent + on: system.cpu + lookup: average -5m unaligned of user,system,nice,softirq,irq,guest,guest_nice + every: 1m + warn: $this > 90 + units: % + info: average cpu utilization for the last 5 minutes + +template: 5min_iowait_cpu_pcent + on: system.cpu + lookup: average -5m unaligned of iowait + every: 1m + warn: $this > 10 + units: % + info: average wait I/O for the last 5 minutes + +template: 20min_steal_cpu_pcent + on: system.cpu + lookup: average -20m unaligned of steal + every: 5m + warn: $this > 10 + units: % + info: average stolen CPU time for the last 20 minutes diff --git a/conf.d/health.d/disks.conf b/conf.d/health.d/disks.conf new file mode 100644 index 000000000..c38f1a0a0 --- /dev/null +++ b/conf.d/health.d/disks.conf @@ -0,0 +1,85 @@ +# ----------------------------------------------------------------------------- +# low disk space + +# checking the latest collected values +# raise an alarm if the disk is low on +# available disk space + +template: disk_full_percent + on: disk.space + calc: $used * 100 / ($avail + $used) + every: 1m + warn: $this > 80 + crit: $this > 95 + units: % + info: current disk space usage + + +# ----------------------------------------------------------------------------- +# disk fill rate + +# calculate the rate the disk fills +# use as base, the available space change +# during the last 30 minutes + +# this is just a calculation - it has no alarm +# we will use it in the next template to find +# the hours remaining + +template: disk_fill_rate + on: disk.space + lookup: max -1s at -30m unaligned of avail + calc: ($this - $avail) / ($now - $after) + every: 15s + units: MB/s + info: average rate the disk fills up (positive), or frees up (negative) space, for the last 30 minutes + + +# calculate the hours remaining +# if the disk continues to fill +# in this rate + +template: disk_full_after_hours + on: disk.space + calc: $avail / $disk_fill_rate / 3600 + every: 10s + warn: $this > 0 and $this < 48 + crit: $this > 0 and $this < 24 + units: hours + info: estimated time the disk will run out of space, if the system continues to add data with the rate of the last 30 minutes + + +# ----------------------------------------------------------------------------- +# disk congestion + +# raise an alarm if the disk is congested +# by calculating the average disk utilization +# for the last 10 minutes + +template: 10min_disk_utilization + on: disk.util + lookup: average -10m unaligned + every: 1m + green: 90 + red: 98 + warn: $this > $green + crit: $this > $red + units: % + info: the percentage of time the disk was busy, during the last 10 minutes + + +# raise an alarm if the disk backlog +# is above 1000ms (1s) per second +# for 10 minutes +# (i.e. the disk cannot catch up) + +template: 10min_disk_backlog + on: disk.backlog + lookup: average -10m unaligned + every: 1m + green: 1000 + red: 2000 + warn: $this > $green + crit: $this > $red + units: ms + info: average of the kernel estimated disk backlog, for the last 10 minutes diff --git a/conf.d/health.d/entropy.conf b/conf.d/health.d/entropy.conf new file mode 100644 index 000000000..6f8b6e851 --- /dev/null +++ b/conf.d/health.d/entropy.conf @@ -0,0 +1,13 @@ + +# check if entropy is too low +# the alarm is checked every 1 minute +# and examines the last 30 minutes of data + + alarm: min_30min_entropy + on: system.entropy + lookup: min -30m unaligned + every: 1m + warn: $this < 200 + crit: $this < 100 + units: entries + info: minimum entries in the random numbers pool (entropy), for the last 30 minutes diff --git a/conf.d/health.d/memcached.conf b/conf.d/health.d/memcached.conf new file mode 100644 index 000000000..05ff14711 --- /dev/null +++ b/conf.d/health.d/memcached.conf @@ -0,0 +1,46 @@ + +# make sure memcached is running + +template: memcached_last_collected_secs + on: memcached.cache + calc: $now - $last_collected_t + every: 10s + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) + units: seconds ago + info: number of seconds since the last successful data collection + + +# detect if memcached cache is full + +template: cache_full_pcent + on: memcached.cache + calc: $used * 100 / ($used + $available) + every: 10s + warn: $this > 80 + crit: $this > 90 + units: % + info: current cache memory usage + + +# find the rate memcached cache is filling + +template: cache_fill_rate + on: memcached.cache + lookup: max -1s at -30m unaligned of available + calc: ($this - $available) / ($now - $after) + every: 15s + units: KB/s + info: average rate the cache fills up (positive), or frees up (negative) space, for the last 30 minutes + + +# find the hours remaining until memcached cache is full + +template: cache_full_after_hours + on: memcached.cache + calc: $available / $cache_fill_rate / 3600 + every: 10s + warn: $this > 0 and $this < 48 + crit: $this > 0 and $this < 24 + units: hours + info: estimated time the cache will run out of space, if the system continues to add data with the rate of the last 30 minutes diff --git a/conf.d/health.d/named.conf b/conf.d/health.d/named.conf new file mode 100644 index 000000000..e46d1d330 --- /dev/null +++ b/conf.d/health.d/named.conf @@ -0,0 +1,12 @@ + +# make sure named is running + +template: named_last_collected_secs + on: named.global_queries + calc: $now - $last_collected_t + every: 10s + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) + units: seconds ago + info: number of seconds since the last successful data collection + diff --git a/conf.d/health.d/net.conf b/conf.d/health.d/net.conf new file mode 100644 index 000000000..f65bc4fcb --- /dev/null +++ b/conf.d/health.d/net.conf @@ -0,0 +1,27 @@ + +# check if an interface is dropping packets +# the alarm is checked every 10 seconds +# and examines the last 30 minutes of data + +template: 30min_packet_drops + on: net.drops + lookup: sum -30m unaligned absolute + every: 1m + crit: $this > 0 + units: packets + info: dropped packets in the last 30 minutes + + +# check if an interface is having FIFO +# buffer errors +# the alarm is checked every 10 seconds +# and examines the last 30 minutes of data + +template: 30min_fifo_errors + on: net.fifo + lookup: sum -30m unaligned absolute + every: 1m + crit: $this > 0 + units: errors + info: network interface fifo errors in the last 30 minutes + diff --git a/conf.d/health.d/nginx.conf b/conf.d/health.d/nginx.conf new file mode 100644 index 000000000..da13008e3 --- /dev/null +++ b/conf.d/health.d/nginx.conf @@ -0,0 +1,12 @@ + +# make sure nginx is running + +template: nginx_last_collected_secs + on: nginx.requests + calc: $now - $last_collected_t + every: 10s + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) + units: seconds ago + info: number of seconds since the last successful data collection + diff --git a/conf.d/health.d/qos.conf b/conf.d/health.d/qos.conf new file mode 100644 index 000000000..ac3bf8ff4 --- /dev/null +++ b/conf.d/health.d/qos.conf @@ -0,0 +1,12 @@ + +# check if a QoS class is dropping packets +# the alarm is checked every 10 seconds +# and examines the last minute of data + +#template: 10min_qos_packet_drops +# on: tc.qos_dropped +# lookup: sum -10m unaligned absolute +# every: 30s +# warn: $this > 0 +# units: packets +# info: dropped packets in the last 30 minutes diff --git a/conf.d/health.d/ram.conf b/conf.d/health.d/ram.conf new file mode 100644 index 000000000..1d3681128 --- /dev/null +++ b/conf.d/health.d/ram.conf @@ -0,0 +1,9 @@ + + alarm: used_ram_pcent + on: system.ram + calc: $used * 100 / ($used + $cached + $free) + every: 10s + warn: $this > 80 + crit: $this > 90 + units: % + info: system RAM usage diff --git a/conf.d/health.d/redis.conf b/conf.d/health.d/redis.conf new file mode 100644 index 000000000..3750176c5 --- /dev/null +++ b/conf.d/health.d/redis.conf @@ -0,0 +1,12 @@ + +# make sure redis is running + +template: redis_last_collected_secs + on: redis.operations + calc: $now - $last_collected_t + every: 10s + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) + units: seconds ago + info: number of seconds since the last successful data collection + diff --git a/conf.d/health.d/squid.conf b/conf.d/health.d/squid.conf new file mode 100644 index 000000000..cc5ce1c3a --- /dev/null +++ b/conf.d/health.d/squid.conf @@ -0,0 +1,12 @@ + +# make sure squid is running + +template: squid_last_collected_secs + on: squid.clients_requests + calc: $now - $last_collected_t + every: 10s + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) + units: seconds ago + info: number of seconds since the last successful data collection + diff --git a/conf.d/health.d/swap.conf b/conf.d/health.d/swap.conf new file mode 100644 index 000000000..552dd310a --- /dev/null +++ b/conf.d/health.d/swap.conf @@ -0,0 +1,20 @@ + + alarm: 30min_ram_swapped_out + on: system.swapio + lookup: sum -30m unaligned absolute of out + # we have to convert KB to MB by dividing $this (i.e. the result of the lookup) with 1024 + calc: $this / 1024 * 100 / ( $system.ram.used + $system.ram.cached + $system.ram.free ) + every: 1m + warn: $this > 1 + crit: $this > 10 + units: % of RAM + info: the sum of all memory swapped out during the last 30 minutes, as a percentage of the available RAM + + alarm: pcent_of_ram_in_swap + on: system.swap + calc: $used * 100 / ( $system.ram.used + $system.ram.cached + $system.ram.free ) + every: 10s + warn: $this > 10 + crit: $this > 50 + units: % of RAM + info: the currently used swap space, as a percentage of the available RAM diff --git a/conf.d/python.d.conf b/conf.d/python.d.conf new file mode 100644 index 000000000..940bd9183 --- /dev/null +++ b/conf.d/python.d.conf @@ -0,0 +1,42 @@ +# netdata python.d.plugin configuration +# +# This file is in YaML format. +# Generally the format is: +# +# name: value +# + +# Enable / disable the whole python.d.plugin (all its modules) +enabled: yes + +# Prevent log flood +# Define how many log messages can be written to log file in one log_interval +logs_per_interval: 200 + +# Define how long is one logging interval (in seconds) +log_interval: 3600 + +# ---------------------------------------------------------------------- +# Enable / Disable python.d.plugin modules +# +# The default for all modules is enabled (yes). +# Setting any of these to no will disable it. + +# apache: yes +# apache_cache: yes +# cpufreq: yes +# dovecot: yes +example: no +# exim: yes +# hddtemp: yes +# ipfs: yes +# memcached: yes +# mysql: yes +# nginx: yes +# nginx_log: yes +# phpfpm: yes +# postfix: yes +# redis: yes +# sensors: yes +# squid: yes +# tomcat: yes diff --git a/conf.d/python.d/apache.conf b/conf.d/python.d/apache.conf new file mode 100644 index 000000000..5b151ef70 --- /dev/null +++ b/conf.d/python.d/apache.conf @@ -0,0 +1,80 @@ +# netdata python.d.plugin configuration for apache +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, apache also supports the following: +# +# url: 'URL' # the URL to fetch apache's mod_status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost/server-status?auto' + +localipv4: + name : 'local' + url : 'http://127.0.0.1/server-status?auto' + +localipv6: + name : 'local' + url : 'http://::1/server-status?auto' diff --git a/conf.d/python.d/apache_cache.conf b/conf.d/python.d/apache_cache.conf new file mode 100644 index 000000000..98eecd0e8 --- /dev/null +++ b/conf.d/python.d/apache_cache.conf @@ -0,0 +1,76 @@ +# netdata python.d.plugin configuration for apache cache +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, apache_cache also supports the following: +# +# path: 'PATH' # the path to apache's cache.log +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +apache: + name: 'local' + path: '/var/log/apache/cache.log' + +apache2: + name: 'local' + path: '/var/log/apache2/cache.log' + +httpd: + name: 'local' + path: '/var/log/httpd/cache.log' diff --git a/conf.d/python.d/cpufreq.conf b/conf.d/python.d/cpufreq.conf new file mode 100644 index 000000000..10c96917f --- /dev/null +++ b/conf.d/python.d/cpufreq.conf @@ -0,0 +1,37 @@ +# netdata python.d.plugin configuration for cpufreq +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# The directory to search for the file scaling_cur_freq +sys_dir: "/sys/devices" diff --git a/conf.d/python.d/dovecot.conf b/conf.d/python.d/dovecot.conf new file mode 100644 index 000000000..917c5272e --- /dev/null +++ b/conf.d/python.d/dovecot.conf @@ -0,0 +1,89 @@ +# netdata python.d.plugin configuration for dovecot +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, dovecot also supports the following: +# +# socket: 'path/to/dovecot/stats' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + host : 'localhost' + port : 24242 + +localipv4: + name : 'local' + host : '127.0.0.1' + port : 24242 + +localipv6: + name : 'local' + host : '::1' + port : 24242 + +localsocket: + name : 'local' + socket : '/var/run/dovecot/stats' + diff --git a/conf.d/python.d/example.conf b/conf.d/python.d/example.conf new file mode 100644 index 000000000..31f9a49a0 --- /dev/null +++ b/conf.d/python.d/example.conf @@ -0,0 +1,63 @@ +# netdata python.d.plugin configuration for example +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, example also supports the following: +# +# - none +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) diff --git a/conf.d/python.d/exim.conf b/conf.d/python.d/exim.conf new file mode 100644 index 000000000..6aca13c34 --- /dev/null +++ b/conf.d/python.d/exim.conf @@ -0,0 +1,86 @@ +# netdata python.d.plugin configuration for postfix +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# exim is slow, so once every 10 seconds +update_every: 10 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, postfix also supports the following: +# +# command: 'exim -bpc' # the command to run +# + +# ---------------------------------------------------------------------- +# REQUIRED exim CONFIGURATION +# +# netdata will query exim as user netdata. +# By default exim will refuse to respond. +# +# To allow querying exim as non-admin user, please set the following +# to your exim configuration: +# +# queue_list_requires_admin = false +# +# Your exim configuration should be in +# +# /etc/exim/exim4.conf +# or +# /etc/exim4/conf.d/main/000_local_options +# +# Please consult your distribution information to find the exact file. + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS + +local: + command: 'exim -bpc' diff --git a/conf.d/python.d/hddtemp.conf b/conf.d/python.d/hddtemp.conf new file mode 100644 index 000000000..0c78449b4 --- /dev/null +++ b/conf.d/python.d/hddtemp.conf @@ -0,0 +1,90 @@ +# netdata python.d.plugin configuration for hddtemp +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, hddtemp also supports the following: +# +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# + +# By default this module will try to autodetect disks +# (autodetection works only for disk which names start with "sd"). +# However this can be overridden by setting variable `disks` to +# array of desired disks. Example for two disks: +# +# devices: +# - sda +# - sdb +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name: 'local' + host: 'localhost' + port: 7634 + +localipv4: + name: 'local' + host: '127.0.0.1' + port: 7634 + +localipv6: + name: 'local' + host: '::1' + port: 7634 diff --git a/conf.d/python.d/ipfs.conf b/conf.d/python.d/ipfs.conf new file mode 100644 index 000000000..e039026cc --- /dev/null +++ b/conf.d/python.d/ipfs.conf @@ -0,0 +1,67 @@ +# netdata python.d.plugin configuration for ipfs +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, ipfs also supports the following: +# +# url: 'URL' # URL to the IPFS API +# +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost:5001' diff --git a/conf.d/python.d/memcached.conf b/conf.d/python.d/memcached.conf new file mode 100644 index 000000000..f1723dc81 --- /dev/null +++ b/conf.d/python.d/memcached.conf @@ -0,0 +1,85 @@ +# netdata python.d.plugin configuration for memcached +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, memcached also supports the following: +# +# socket: 'path/to/memcached.sock' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + host : 'localhost' + port : 11211 + +localipv4: + name : 'local' + host : '127.0.0.1' + port : 11211 + +localipv6: + name : 'local' + host : '::1' + port : 11211 + diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf new file mode 100644 index 000000000..d247b89a0 --- /dev/null +++ b/conf.d/python.d/mysql.conf @@ -0,0 +1,175 @@ +# netdata python.d.plugin configuration for mysql +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, mysql also supports the following: +# +# socket: 'path/to/mysql.sock' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# in all cases, the following can also be set: +# +# user: 'username' # the mysql username to use +# pass: 'password' # the mysql password to use +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +mycnf1: + name : 'local' + 'my.cnf' : '/etc/my.cnf' + +mycnf2: + name : 'local' + 'my.cnf' : '/etc/mysql/my.cnf' + +socket1: + name : 'local' + # user : '' + # pass : '' + socket : '/var/run/mysqld/mysqld.sock' + +socket2: + name : 'local' + # user : '' + # pass : '' + socket : '/var/lib/mysql/mysql.sock' + +socket3: + name : 'local' + # user : '' + # pass : '' + socket : '/tmp/mysql.sock' + +tcp: + name : 'local' + # user : '' + # pass : '' + host : 'localhost' + port : '3306' + +tcpipv4: + name : 'local' + # user : '' + # pass : '' + host : '127.0.0.1' + port : '3306' + +tcpipv6: + name : 'local' + # user : '' + # pass : '' + host : '::1' + port : '3306' + + +# Now we try the same as above with user: root +# A few systems configure mysql to accept passwordless +# root access. + +mycnf1_root: + name : 'local' + user : 'root' + 'my.cnf' : '/etc/my.cnf' + +mycnf2_root: + name : 'local' + user : 'root' + 'my.cnf' : '/etc/mysql/my.cnf' + +socket1_root: + name : 'local' + user : 'root' + # pass : '' + socket : '/var/run/mysqld/mysqld.sock' + +socket2_root: + name : 'local' + user : 'root' + # pass : '' + socket : '/var/lib/mysql/mysql.sock' + +socket3_root: + name : 'local' + user : 'root' + # pass : '' + socket : '/tmp/mysql.sock' + +tcp_root: + name : 'local' + user : 'root' + # pass : '' + host : 'localhost' + port : '3306' + +tcpipv4_root: + name : 'local' + user : 'root' + # pass : '' + host : '127.0.0.1' + port : '3306' + +tcpipv6_root: + name : 'local' + user : 'root' + # pass : '' + host : '::1' + port : '3306' + diff --git a/conf.d/python.d/nginx.conf b/conf.d/python.d/nginx.conf new file mode 100644 index 000000000..1a27d67c5 --- /dev/null +++ b/conf.d/python.d/nginx.conf @@ -0,0 +1,82 @@ +# netdata python.d.plugin configuration for nginx +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, nginx also supports the following: +# +# url: 'URL' # the URL to fetch nginx's status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost/stub_status' + +localipv4: + name : 'local' + url : 'http://127.0.0.1/stub_status' + +localipv6: + name : 'local' + url : 'http://::1/stub_status' + diff --git a/conf.d/python.d/nginx_log.conf b/conf.d/python.d/nginx_log.conf new file mode 100644 index 000000000..6a53c5204 --- /dev/null +++ b/conf.d/python.d/nginx_log.conf @@ -0,0 +1,72 @@ +# netdata python.d.plugin configuration for nginx log +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, nginx_log also supports the following: +# +# path: 'PATH' # the path to nginx's access.log +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +nginx_log: + name: 'local' + path: '/var/log/nginx/access.log' + +nginx_log2: + name: 'local' + path: '/var/log/nginx/nginx-access.log' diff --git a/conf.d/python.d/phpfpm.conf b/conf.d/python.d/phpfpm.conf new file mode 100644 index 000000000..06d2367ae --- /dev/null +++ b/conf.d/python.d/phpfpm.conf @@ -0,0 +1,82 @@ +# netdata python.d.plugin configuration for PHP-FPM +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, PHP-FPM also supports the following: +# +# url: 'URL' # the URL to fetch nginx's status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : "http://localhost/status" + +localipv4: + name : 'local' + url : "http://127.0.0.1/status" + +localipv6: + name : 'local' + url : "http://::1/status" + diff --git a/conf.d/python.d/postfix.conf b/conf.d/python.d/postfix.conf new file mode 100644 index 000000000..ca9d8fada --- /dev/null +++ b/conf.d/python.d/postfix.conf @@ -0,0 +1,67 @@ +# netdata python.d.plugin configuration for postfix +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# postfix is slow, so once every 10 seconds +update_every: 10 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, postfix also supports the following: +# +# command: 'postqueue -p' # the command to run +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS + +local: + command: 'postqueue -p' diff --git a/conf.d/python.d/redis.conf b/conf.d/python.d/redis.conf new file mode 100644 index 000000000..9935bff77 --- /dev/null +++ b/conf.d/python.d/redis.conf @@ -0,0 +1,97 @@ +# netdata python.d.plugin configuration for redis +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, redis also supports the following: +# +# socket: 'path/to/mysql.sock' +# +# or +# host: 'IP or HOSTNAME' # the host to connect to +# port: PORT # the port to connect to +# +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +socket1: + name : 'local' + socket : '/tmp/redis.sock' + +socket2: + name : 'local' + socket : '/var/run/redis/redis.sock' + +socket3: + name : 'local' + socket : '/var/lib/redis/redis.sock' + +localhost: + name : 'local' + host : 'localhost' + port : 6379 + +localipv4: + name : 'local' + host : '127.0.0.1' + port : 6379 + +localipv6: + name : 'local' + host : '::1' + port : 6379 + diff --git a/conf.d/python.d/sensors.conf b/conf.d/python.d/sensors.conf new file mode 100644 index 000000000..7d895c348 --- /dev/null +++ b/conf.d/python.d/sensors.conf @@ -0,0 +1,54 @@ +# netdata python.d.plugin configuration for sensors +# +# This file is in YaML format. Generally the format is: +# +# name: value +# + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# Limit the number of sensors types. +# Comment the ones you want to disable. +# Also, re-arranging this list controls the order of the charts at the +# netdata dashboard. + +types: + - temperature + - fan + - voltage + - current + - power + - energy + - humidity + +# ---------------------------------------------------------------------- +# Limit the number of sensors chips. +# Uncomment the first line (chips:) and add chip names below it. +# The chip names that start with like that will be matched. +# You can find the chip names using the sensors command. + +#chips: +# - i8k +# - coretemp +# +# chip names can be found using the sensors shell command +# the prefix is matched (anything that starts like that) diff --git a/conf.d/python.d/squid.conf b/conf.d/python.d/squid.conf new file mode 100644 index 000000000..27800bde7 --- /dev/null +++ b/conf.d/python.d/squid.conf @@ -0,0 +1,162 @@ +# netdata python.d.plugin configuration for squid +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, squid also supports the following: +# +# host : 'IP or HOSTNAME' # the host to connect to +# port : PORT # the port to connect to +# request: 'URL' # the URL to request from squid +# + +# ---------------------------------------------------------------------- +# SQUID CONFIGURATION +# +# See: +# http://wiki.squid-cache.org/Features/CacheManager +# +# In short, add to your squid configuration these: +# +# http_access allow localhost manager +# http_access deny manager +# +# To remotely monitor a squid: +# +# acl managerAdmin src 192.0.2.1 +# http_access allow localhost manager +# http_access allow managerAdmin manager +# http_access deny manager +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +tcp3128old: + name : 'local' + host : 'localhost' + port : 3128 + request : 'cache_object://localhost:3128/counters' + +tcp8080old: + name : 'local' + host : 'localhost' + port : 8080 + request : 'cache_object://localhost:3128/counters' + +tcp3128new: + name : 'local' + host : 'localhost' + port : 3128 + request : '/squid-internal-mgr/counters' + +tcp8080new: + name : 'local' + host : 'localhost' + port : 8080 + request : '/squid-internal-mgr/counters' + +# IPv4 + +tcp3128oldipv4: + name : 'local' + host : '127.0.0.1' + port : 3128 + request : 'cache_object://127.0.0.1:3128/counters' + +tcp8080oldipv4: + name : 'local' + host : '127.0.0.1' + port : 8080 + request : 'cache_object://127.0.0.1:3128/counters' + +tcp3128newipv4: + name : 'local' + host : '127.0.0.1' + port : 3128 + request : '/squid-internal-mgr/counters' + +tcp8080newipv4: + name : 'local' + host : '127.0.0.1' + port : 8080 + request : '/squid-internal-mgr/counters' + +# IPv6 + +tcp3128oldipv6: + name : 'local' + host : '::1' + port : 3128 + request : 'cache_object://[::1]:3128/counters' + +tcp8080oldipv6: + name : 'local' + host : '::1' + port : 8080 + request : 'cache_object://[::1]:3128/counters' + +tcp3128newipv6: + name : 'local' + host : '::1' + port : 3128 + request : '/squid-internal-mgr/counters' + +tcp8080newipv6: + name : 'local' + host : '::1' + port : 8080 + request : '/squid-internal-mgr/counters' + diff --git a/conf.d/python.d/tomcat.conf b/conf.d/python.d/tomcat.conf new file mode 100644 index 000000000..aef9631b9 --- /dev/null +++ b/conf.d/python.d/tomcat.conf @@ -0,0 +1,81 @@ +# netdata python.d.plugin configuration for tomcat +# +# This file is in YaML format. Generally the format is: +# +# name: value +# +# There are 2 sections: +# - global variables +# - one or more JOBS +# +# JOBS allow you to collect values from multiple sources. +# Each source will have its own set of charts. +# +# JOB parameters have to be indented (using spaces only, example below). + +# ---------------------------------------------------------------------- +# Global Variables +# These variables set the defaults for all JOBs, however each JOB +# may define its own, overriding the defaults. + +# update_every sets the default data collection frequency. +# If unset, the python.d.plugin default is used. +# update_every: 1 + +# priority controls the order of charts at the netdata dashboard. +# Lower numbers move the charts towards the top of the page. +# If unset, the default for python.d.plugin is used. +# priority: 60000 + +# retries sets the number of retries to be made in case of failures. +# If unset, the default for python.d.plugin is used. +# Attempts to restore the service are made once every update_every +# and only if the module has collected values in the past. +# retries: 5 + +# ---------------------------------------------------------------------- +# JOBS (data collection sources) +# +# The default JOBS share the same *name*. JOBS with the same name +# are mutually exclusive. Only one of them will be allowed running at +# any time. This allows autodetection to try several alternatives and +# pick the one that works. +# +# Any number of jobs is supported. +# +# All python.d.plugin JOBS (for all its modules) support a set of +# predefined parameters. These are: +# +# job_name: +# name: myname # the JOB's name as it will appear at the +# # dashboard (by default is the job_name) +# # JOBs sharing a name are mutually exclusive +# update_every: 1 # the JOB's data collection frequency +# priority: 60000 # the JOB's order on the dashboard +# retries: 5 # the JOB's number of restoration attempts +# +# Additionally to the above, tomcat also supports the following: +# +# url: 'URL' # the URL to fetch nginx's status stats +# +# if the URL is password protected, the following are supported: +# +# user: 'username' +# pass: 'password' +# + +# ---------------------------------------------------------------------- +# AUTO-DETECTION JOBS +# only one of them will run (they have the same name) + +localhost: + name : 'local' + url : 'http://localhost:8080/manager/status?XML=true' + +localipv4: + name : 'local' + url : 'http://127.0.0.1:8080/manager/status?XML=true' + +localipv6: + name : 'local' + url : 'http://[::1]:8080/manager/status?XML=true' |