summaryrefslogtreecommitdiffstats
path: root/daemon
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--daemon/README.md61
-rw-r--r--daemon/analytics.c28
-rwxr-xr-xdaemon/anonymous-statistics.sh.in6
-rw-r--r--daemon/buildinfo.c174
-rw-r--r--daemon/buildinfo.h8
-rw-r--r--daemon/commands.c8
-rw-r--r--daemon/common.h4
-rw-r--r--daemon/config/README.md89
-rw-r--r--daemon/daemon.c30
-rw-r--r--daemon/get-kubernetes-labels.sh.in21
-rw-r--r--daemon/global_statistics.c12
-rw-r--r--daemon/main.c53
-rw-r--r--daemon/service.c5
-rw-r--r--daemon/static_threads.c19
-rw-r--r--daemon/static_threads_linux.c9
-rwxr-xr-xdaemon/system-info.sh91
-rw-r--r--daemon/unit_test.c44
-rw-r--r--daemon/unit_test.h1
18 files changed, 395 insertions, 268 deletions
diff --git a/daemon/README.md b/daemon/README.md
index 1ea865f89..44abfa8e9 100644
--- a/daemon/README.md
+++ b/daemon/README.md
@@ -254,57 +254,14 @@ where:
See [debugging](#debugging).
-## OOM Score
-
-Netdata runs with `OOMScore = 1000`. This means Netdata will be the first to be killed when your server runs out of
-memory.
-
-You can set Netdata OOMScore in `netdata.conf`, like this:
-
-```conf
-[global]
- OOM score = 1000
-```
-
-Netdata logs its OOM score when it starts:
-
-```sh
-# grep OOM /var/log/netdata/error.log
-2017-10-15 03:47:31: netdata INFO : Adjusted my Out-Of-Memory (OOM) score from 0 to 1000.
-```
-
-### OOM score and systemd
-
-Netdata will not be able to lower its OOM Score below zero, when it is started as the `netdata` user (systemd case).
-
-To allow Netdata control its OOM Score in such cases, you will need to edit `netdata.service` and set:
-
-```sh
-[Service]
-# The minimum Netdata Out-Of-Memory (OOM) score.
-# Netdata (via [global].OOM score in netdata.conf) can only increase the value set here.
-# To decrease it, set the minimum here and set the same or a higher value in netdata.conf.
-# Valid values: -1000 (never kill netdata) to 1000 (always kill netdata).
-OOMScoreAdjust=-1000
-```
-
-Run `systemctl daemon-reload` to reload these changes.
-
-The above, sets and OOMScore for Netdata to `-1000`, so that Netdata can increase it via `netdata.conf`.
-
-If you want to control it entirely via systemd, you can set in `netdata.conf`:
-
-```conf
-[global]
- OOM score = keep
-```
-
-Using the above, whatever OOM Score you have set at `netdata.service` will be maintained by netdata.
-
## Netdata process scheduling policy
-By default Netdata runs with the `idle` process scheduling policy, so that it uses CPU resources, only when there is
-idle CPU to spare. On very busy servers (or weak servers), this can lead to gaps on the charts.
+By default Netdata versions prior to 1.34.0 run with the `idle` process scheduling policy, so that it uses CPU
+resources, only when there is idle CPU to spare. On very busy servers (or weak servers), this can lead to gaps on
+the charts.
+
+Starting with version 1.34.0, Netdata instead uses the `batch` scheduling policy by default. This largely eliminates
+issues with gaps in charts on busy systems while still keeping the impact on the rest of the system low.
You can set Netdata scheduling policy in `netdata.conf`, like this:
@@ -315,9 +272,9 @@ You can set Netdata scheduling policy in `netdata.conf`, like this:
You can use the following:
-| policy | description |
+| policy | description |
| :-----------------------: | :---------- |
-| `idle` | use CPU only when there is spare - this is lower than nice 19 - it is the default for Netdata and it is so low that Netdata will run in "slow motion" under extreme system load, resulting in short (1-2 seconds) gaps at the charts. |
+| `idle` | use CPU only when there is spare - this is lower than nice 19 - it is the default for Netdata and it is so low that Netdata will run in "slow motion" under extreme system load, resulting in short (1-2 seconds) gaps at the charts. |
| `other`<br/>or<br/>`nice` | this is the default policy for all processes under Linux. It provides dynamic priorities based on the `nice` level of each process. Check below for setting this `nice` level for netdata. |
| `batch` | This policy is similar to `other` in that it schedules the thread according to its dynamic priority (based on the `nice` value). The difference is that this policy will cause the scheduler to always assume that the thread is CPU-intensive. Consequently, the scheduler will apply a small scheduling penalty with respect to wake-up behavior, so that this thread is mildly disfavored in scheduling decisions. |
| `fifo` | `fifo` can be used only with static priorities higher than 0, which means that when a `fifo` threads becomes runnable, it will always immediately preempt any currently running `other`, `batch`, or `idle` thread. `fifo` is a simple scheduling algorithm without time slicing. |
@@ -551,4 +508,4 @@ valgrind $(which netdata) -D
Netdata will start and it will be a lot slower. Now reproduce the crash and `valgrind` will dump on your console the
stack trace. Open a new github issue and post the output.
-[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdaemon%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)
+
diff --git a/daemon/analytics.c b/daemon/analytics.c
index 4501a46a5..0af41fdda 100644
--- a/daemon/analytics.c
+++ b/daemon/analytics.c
@@ -362,21 +362,15 @@ void analytics_alarms_notifications(void)
void analytics_get_install_type(void)
{
- struct install_type_info t = get_install_type();
-
- if (t.install_type == NULL) {
+ if (localhost->system_info->install_type == NULL) {
analytics_set_data_str(&analytics_data.netdata_install_type, "unknown");
} else {
- analytics_set_data_str(&analytics_data.netdata_install_type, t.install_type);
+ analytics_set_data_str(&analytics_data.netdata_install_type, localhost->system_info->install_type);
}
- if (t.prebuilt_distro != NULL) {
- analytics_set_data_str(&analytics_data.netdata_prebuilt_distro, t.prebuilt_distro);
+ if (localhost->system_info->prebuilt_dist != NULL) {
+ analytics_set_data_str(&analytics_data.netdata_prebuilt_distro, localhost->system_info->prebuilt_dist);
}
-
- freez(t.prebuilt_arch);
- freez(t.prebuilt_distro);
- freez(t.install_type);
}
/*
@@ -422,12 +416,16 @@ void analytics_metrics(void)
rrdset_foreach_read(st, localhost)
{
rrdset_rdlock(st);
- rrddim_foreach_read(rd, st)
- {
- if (rrddim_flag_check(rd, RRDDIM_FLAG_HIDDEN) || rrddim_flag_check(rd, RRDDIM_FLAG_OBSOLETE))
- continue;
- dimensions++;
+
+ if (rrdset_is_available_for_viewers(st)) {
+ rrddim_foreach_read(rd, st)
+ {
+ if (rrddim_flag_check(rd, RRDDIM_FLAG_HIDDEN) || rrddim_flag_check(rd, RRDDIM_FLAG_OBSOLETE))
+ continue;
+ dimensions++;
+ }
}
+
rrdset_unlock(st);
}
{
diff --git a/daemon/anonymous-statistics.sh.in b/daemon/anonymous-statistics.sh.in
index 9167b7062..9f8df188d 100755
--- a/daemon/anonymous-statistics.sh.in
+++ b/daemon/anonymous-statistics.sh.in
@@ -18,7 +18,11 @@ ACTION_DATA=$(echo "${ACTION_DATA}" | tr '"' "'")
# -------------------------------------------------------------------------------------------------
# check opt-out
-if [ -f "@configdir_POST@/.opt-out-from-anonymous-statistics" ] || [ ! "${DO_NOT_TRACK:-0}" -eq 0 ] || [ -n "$DO_NOT_TRACK" ]; then
+if [ -f "@configdir_POST@/.opt-out-from-anonymous-statistics" ] ||
+ [ ! "${DISABLE_TELEMETRY:-0}" -eq 0 ] ||
+ [ -n "$DISABLE_TELEMETRY" ] ||
+ [ ! "${DO_NOT_TRACK:-0}" -eq 0 ] ||
+ [ -n "$DO_NOT_TRACK" ]; then
exit 0
fi
diff --git a/daemon/buildinfo.c b/daemon/buildinfo.c
index b64a78f29..86c586afc 100644
--- a/daemon/buildinfo.c
+++ b/daemon/buildinfo.c
@@ -60,7 +60,6 @@
// Optional libraries
#ifdef HAVE_PROTOBUF
-#if defined(ACLK_NG) || defined(ENABLE_PROMETHEUS_REMOTE_WRITE)
#define FEAT_PROTOBUF 1
#ifdef BUNDLED_PROTOBUF
#define FEAT_PROTOBUF_BUNDLED " (bundled)"
@@ -71,10 +70,6 @@
#define FEAT_PROTOBUF 0
#define FEAT_PROTOBUF_BUNDLED ""
#endif
-#else
-#define FEAT_PROTOBUF 0
-#define FEAT_PROTOBUF_BUNDLED ""
-#endif
#ifdef ENABLE_JSONC
#define FEAT_JSONC 1
@@ -222,9 +217,8 @@ char *get_value_from_key(char *buffer, char *key) {
return s;
}
-struct install_type_info get_install_type() {
+void get_install_type(char **install_type, char **prebuilt_arch, char **prebuilt_dist) {
char *install_type_filename;
- struct install_type_info ret = {.install_type = NULL, .prebuilt_arch = NULL, .prebuilt_distro = NULL};
int install_type_filename_len = (strlen(netdata_configured_user_config_dir) + strlen(".install-type") + 3);
install_type_filename = mallocz(sizeof(char) * install_type_filename_len);
@@ -237,41 +231,42 @@ struct install_type_info get_install_type() {
while ((s = fgets_trim_len(buf, 256, fp, &len))) {
if (!strncmp(buf, "INSTALL_TYPE='", 14))
- ret.install_type = strdupz((char *)get_value_from_key(buf, "INSTALL_TYPE"));
+ *install_type = strdupz((char *)get_value_from_key(buf, "INSTALL_TYPE"));
else if (!strncmp(buf, "PREBUILT_ARCH='", 15))
- ret.prebuilt_arch = strdupz((char *)get_value_from_key(buf, "PREBUILT_ARCH"));
+ *prebuilt_arch = strdupz((char *)get_value_from_key(buf, "PREBUILT_ARCH"));
else if (!strncmp(buf, "PREBUILT_DISTRO='", 17))
- ret.prebuilt_distro = strdupz((char *)get_value_from_key(buf, "PREBUILT_DISTRO"));
+ *prebuilt_dist = strdupz((char *)get_value_from_key(buf, "PREBUILT_DISTRO"));
}
fclose(fp);
}
freez(install_type_filename);
-
- return ret;
}
void print_build_info(void) {
- struct install_type_info t = get_install_type();
+ char *install_type = NULL;
+ char *prebuilt_arch = NULL;
+ char *prebuilt_distro = NULL;
+ get_install_type(&install_type, &prebuilt_arch, &prebuilt_distro);
printf("Configure options: %s\n", CONFIGURE_COMMAND);
- if (t.install_type == NULL) {
+ if (install_type == NULL) {
printf("Install type: unknown\n");
} else {
- printf("Install type: %s\n", t.install_type);
+ printf("Install type: %s\n", install_type);
}
- if (t.prebuilt_arch != NULL) {
- printf(" Binary architecture: %s\n", t.prebuilt_arch);
+ if (prebuilt_arch != NULL) {
+ printf(" Binary architecture: %s\n", prebuilt_arch);
}
- if (t.prebuilt_distro != NULL) {
- printf(" Packaging distro: %s\n", t.prebuilt_distro);
+ if (prebuilt_distro != NULL) {
+ printf(" Packaging distro: %s\n", prebuilt_distro);
}
- freez(t.install_type);
- freez(t.prebuilt_arch);
- freez(t.prebuilt_distro);
+ freez(install_type);
+ freez(prebuilt_arch);
+ freez(prebuilt_distro);
printf("Features:\n");
printf(" dbengine: %s\n", FEAT_YES_NO(FEAT_DBENGINE));
@@ -372,41 +367,104 @@ void print_build_info_json(void) {
printf("}\n");
};
-//return a list of enabled features for use in analytics
-//find a way to have proper |
+#define add_to_bi(buffer, str) \
+ { if(first) { \
+ buffer_strcat (b, str); \
+ first = 0; \
+ } else \
+ buffer_strcat (b, "|" str); }
+
void analytics_build_info(BUFFER *b) {
- if(FEAT_DBENGINE) buffer_strcat (b, "dbengine");
- if(FEAT_NATIVE_HTTPS) buffer_strcat (b, "|Native HTTPS");
- if(FEAT_CLOUD) buffer_strcat (b, "|Netdata Cloud");
- if(FEAT_CLOUD) buffer_strcat (b, "|ACLK Next Generation");
- if(NEW_CLOUD_PROTO) buffer_strcat (b, "|New Cloud Protocol Support");
- if(FEAT_TLS_HOST_VERIFY) buffer_strcat (b, "|TLS Host Verification");
- if(FEAT_ML) buffer_strcat (b, "|Machine Learning");
- if(FEAT_STREAM_COMPRESSION) buffer_strcat (b, "|Stream Compression");
-
- if(FEAT_PROTOBUF) buffer_strcat (b, "|protobuf");
- if(FEAT_JEMALLOC) buffer_strcat (b, "|jemalloc");
- if(FEAT_JSONC) buffer_strcat (b, "|JSON-C");
- if(FEAT_LIBCAP) buffer_strcat (b, "|libcap");
- if(FEAT_CRYPTO) buffer_strcat (b, "|libcrypto");
- if(FEAT_LIBM) buffer_strcat (b, "|libm");
-
- if(FEAT_TCMALLOC) buffer_strcat(b, "|tcalloc");
- if(FEAT_ZLIB) buffer_strcat(b, "|zlib");
-
- if(FEAT_APPS_PLUGIN) buffer_strcat(b, "|apps");
- if(FEAT_CGROUP_NET) buffer_strcat(b, "|cgroup Network Tracking");
- if(FEAT_CUPS) buffer_strcat(b, "|CUPS");
- if(FEAT_EBPF) buffer_strcat(b, "|EBPF");
- if(FEAT_IPMI) buffer_strcat(b, "|IPMI");
- if(FEAT_NFACCT) buffer_strcat(b, "|NFACCT");
- if(FEAT_PERF) buffer_strcat(b, "|perf");
- if(FEAT_SLABINFO) buffer_strcat(b, "|slabinfo");
- if(FEAT_XEN) buffer_strcat(b, "|Xen");
- if(FEAT_XEN_VBD_ERROR) buffer_strcat(b, "|Xen VBD Error Tracking");
-
- if(FEAT_KINESIS) buffer_strcat(b, "|AWS Kinesis");
- if(FEAT_PUBSUB) buffer_strcat(b, "|GCP PubSub");
- if(FEAT_MONGO) buffer_strcat(b, "|MongoDB");
- if(FEAT_REMOTE_WRITE) buffer_strcat(b, "|Prometheus Remote Write");
+ int first = 1;
+#ifdef ENABLE_DBENGINE
+ add_to_bi(b, "dbengine");
+#endif
+#ifdef ENABLE_HTTPS
+ add_to_bi(b, "Native HTTPS");
+#endif
+#ifdef ENABLE_ACLK
+ add_to_bi(b, "Netdata Cloud|ACLK Next Generation");
+#endif
+#ifdef ENABLE_NEW_CLOUD_PROTOCOL
+ add_to_bi(b, "New Cloud Protocol Support");
+#endif
+#if (FEAT_TLS_HOST_VERIFY!=0)
+ add_to_bi(b, "TLS Host Verification");
+#endif
+#ifdef ENABLE_ML
+ add_to_bi(b, "Machine Learning");
+#endif
+#ifdef ENABLE_COMPRESSION
+ add_to_bi(b, "Stream Compression");
+#endif
+
+#ifdef HAVE_PROTOBUF
+ add_to_bi(b, "protobuf");
+#endif
+#ifdef ENABLE_JEMALLOC
+ add_to_bi(b, "jemalloc");
+#endif
+#ifdef ENABLE_JSONC
+ add_to_bi(b, "JSON-C");
+#endif
+#ifdef HAVE_CAPABILITY
+ add_to_bi(b, "libcap");
+#endif
+#ifdef HAVE_CRYPTO
+ add_to_bi(b, "libcrypto");
+#endif
+#ifdef STORAGE_WITH_MATH
+ add_to_bi(b, "libm");
+#endif
+
+#ifdef ENABLE_TCMALLOC
+ add_to_bi(b, "tcalloc");
+#endif
+#ifdef NETDATA_WITH_ZLIB
+ add_to_bi(b, "zlib");
+#endif
+
+#ifdef ENABLE_APPS_PLUGIN
+ add_to_bi(b, "apps");
+#endif
+#ifdef HAVE_SETNS
+ add_to_bi(b, "cgroup Network Tracking");
+#endif
+#ifdef HAVE_CUPS
+ add_to_bi(b, "CUPS");
+#endif
+#ifdef HAVE_LIBBPF
+ add_to_bi(b, "EBPF");
+#endif
+#ifdef HAVE_FREEIPMI
+ add_to_bi(b, "IPMI");
+#endif
+#ifdef HAVE_NFACCT
+ add_to_bi(b, "NFACCT");
+#endif
+#ifdef ENABLE_PERF_PLUGIN
+ add_to_bi(b, "perf");
+#endif
+#ifdef ENABLE_SLABINFO
+ add_to_bi(b, "slabinfo");
+#endif
+#ifdef HAVE_LIBXENSTAT
+ add_to_bi(b, "Xen");
+#endif
+#ifdef HAVE_XENSTAT_VBD_ERROR
+ add_to_bi(b, "Xen VBD Error Tracking");
+#endif
+
+#ifdef HAVE_KINESIS
+ add_to_bi(b, "AWS Kinesis");
+#endif
+#ifdef ENABLE_EXPORTING_PUBSUB
+ add_to_bi(b, "GCP PubSub");
+#endif
+#ifdef HAVE_MONGOC
+ add_to_bi(b, "MongoDB");
+#endif
+#ifdef ENABLE_PROMETHEUS_REMOTE_WRITE
+ add_to_bi(b, "Prometheus Remote Write");
+#endif
}
diff --git a/daemon/buildinfo.h b/daemon/buildinfo.h
index e2a31c94a..542a0e92e 100644
--- a/daemon/buildinfo.h
+++ b/daemon/buildinfo.h
@@ -3,18 +3,12 @@
#ifndef NETDATA_BUILDINFO_H
#define NETDATA_BUILDINFO_H 1
-struct install_type_info {
- char *install_type;
- char *prebuilt_arch;
- char *prebuilt_distro;
-};
-
extern void print_build_info(void);
extern void print_build_info_json(void);
extern char *get_value_from_key(char *buffer, char *key);
-extern struct install_type_info get_install_type();
+extern void get_install_type(char **install_type, char **prebuilt_arch, char **prebuilt_dist);
#endif // NETDATA_BUILDINFO_H
diff --git a/daemon/commands.c b/daemon/commands.c
index ddf20fe0b..6efc37c96 100644
--- a/daemon/commands.c
+++ b/daemon/commands.c
@@ -387,6 +387,7 @@ static void pipe_write_cb(uv_write_t* req, int status)
uv_close((uv_handle_t *)client, pipe_close_cb);
--clients;
+ freez(client->data);
info("Command Clients = %u\n", clients);
}
@@ -400,6 +401,10 @@ static inline void add_string_to_command_reply(char *reply_string, unsigned *rep
unsigned len;
len = strlen(str);
+
+ if (MAX_COMMAND_LENGTH - 1 < len + *reply_string_size)
+ len = MAX_COMMAND_LENGTH - *reply_string_size - 1;
+
strncpyz(reply_string + *reply_string_size, str, len);
*reply_string_size += len;
}
@@ -407,7 +412,7 @@ static inline void add_string_to_command_reply(char *reply_string, unsigned *rep
static void send_command_reply(struct command_context *cmd_ctx, cmd_status_t status, char *message)
{
int ret;
- char reply_string[MAX_COMMAND_LENGTH] = {'\0', };
+ char *reply_string = mallocz(MAX_COMMAND_LENGTH);
char exit_status_string[MAX_EXIT_STATUS_LENGTH + 1] = {'\0', };
unsigned reply_string_size = 0;
uv_buf_t write_buf;
@@ -424,6 +429,7 @@ static void send_command_reply(struct command_context *cmd_ctx, cmd_status_t sta
}
cmd_ctx->write_req.data = client;
+ client->data = reply_string;
write_buf.base = reply_string;
write_buf.len = reply_string_size;
ret = uv_write(&cmd_ctx->write_req, (uv_stream_t *)client, &write_buf, 1, pipe_write_cb);
diff --git a/daemon/common.h b/daemon/common.h
index 5354e2ae0..e11a6d6b6 100644
--- a/daemon/common.h
+++ b/daemon/common.h
@@ -51,9 +51,7 @@
// the registry is actually an API feature
#include "registry/registry.h"
-// backends for archiving the metrics
-#include "backends/backends.h"
-// the new exporting engine for archiving the metrics
+// exporting engine for archiving the metrics
#include "exporting/exporting_engine.h"
// the netdata API
diff --git a/daemon/config/README.md b/daemon/config/README.md
index cc755af78..c3c639923 100644
--- a/daemon/config/README.md
+++ b/daemon/config/README.md
@@ -19,10 +19,9 @@ This config file **is not needed by default**. Netdata works fine out of the box
settings.
4. `[health]` to [configure](#health-section-options) general settings for [health monitoring](/health/README.md)
5. `[registry]` for the [Netdata registry](/registry/README.md).
-6. `[backend]` to set up [streaming and replication](/streaming/README.md) options.
-7. `[statsd]` for the general settings of the [stats.d.plugin](/collectors/statsd.plugin/README.md).
-8. `[plugin:NAME]` sections for each collector plugin, under the comment [Per plugin configuration](#per-plugin-configuration).
-9. `[CHART_NAME]` sections for each chart defined, under the comment [Per chart configuration](#per-chart-configuration).
+6. `[statsd]` for the general settings of the [stats.d.plugin](/collectors/statsd.plugin/README.md).
+7. `[plugin:NAME]` sections for each collector plugin, under the comment [Per plugin configuration](#per-plugin-configuration).
+8. `[CHART_NAME]` sections for each chart defined, under the comment [Per chart configuration](#per-chart-configuration).
The configuration file is a `name = value` dictionary. Netdata will not complain if you set options unknown to it. When you check the running configuration by accessing the URL `/netdata.conf` on your Netdata server, Netdata will add a comment on settings it does not currently use.
@@ -47,45 +46,45 @@ Please note that your data history will be lost if you have modified `history` p
### [global] section options
-| setting|default|info|||
-|:-----:|:-----:|:---|---|---|
-| process scheduling policy|`keep`|See [Netdata process scheduling policy](/daemon/README.md#netdata-process-scheduling-policy)|||
-| OOM score|`1000`|See [OOM score](/daemon/README.md#oom-score)|||
-| glibc malloc arena max for plugins|`1`|See [Virtual memory](/daemon/README.md#virtual-memory).|||
-| glibc malloc arena max for Netdata|`1`|See [Virtual memory](/daemon/README.md#virtual-memory).|||
-| hostname|auto-detected|The hostname of the computer running Netdata.|||
-| history|`3996`| Used with `memory mode = save/map/ram/alloc`, not the default `memory mode = dbengine`. This number reflects the number of entries the `netdata` daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](/database/README.md) for more information. |||
-| update every|`1`|The frequency in seconds, for data collection. For more information see the [performance guide](/docs/guides/configure/performance.md).|||
-| config directory|`/etc/netdata`|The directory configuration files are kept.|||
-| stock config directory|`/usr/lib/netdata/conf.d`||||
-| log directory|`/var/log/netdata`|The directory in which the [log files](/daemon/README.md#log-files) are kept.|||
-| web files directory|`/usr/share/netdata/web`|The directory the web static files are kept.|||
-| cache directory|`/var/cache/netdata`|The directory the memory database will be stored if and when Netdata exits. Netdata will re-read the database when it will start again, to continue from the same point.|||
-| lib directory|`/var/lib/netdata`|Contains the alarm log and the Netdata instance guid.|||
-| home directory|`/var/cache/netdata`|Contains the db files for the collected metrics|||
-| plugins directory|`"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"`|The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes.|||
+| setting|default|info|
+|:-----:|:-----:|:---|
+| process scheduling policy|`keep`|See [Netdata process scheduling policy](/daemon/README.md#netdata-process-scheduling-policy)|
+| OOM score|`0`||
+| glibc malloc arena max for plugins|`1`|See [Virtual memory](/daemon/README.md#virtual-memory).|
+| glibc malloc arena max for Netdata|`1`|See [Virtual memory](/daemon/README.md#virtual-memory).|
+| hostname|auto-detected|The hostname of the computer running Netdata.|
+| history|`3996`| Used with `memory mode = save/map/ram/alloc`, not the default `memory mode = dbengine`. This number reflects the number of entries the `netdata` daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](/database/README.md) for more information. |
+| update every|`1`|The frequency in seconds, for data collection. For more information see the [performance guide](/docs/guides/configure/performance.md).|
+| config directory|`/etc/netdata`|The directory configuration files are kept.|
+| stock config directory|`/usr/lib/netdata/conf.d`||
+| log directory|`/var/log/netdata`|The directory in which the [log files](/daemon/README.md#log-files) are kept.|
+| web files directory|`/usr/share/netdata/web`|The directory the web static files are kept.|
+| cache directory|`/var/cache/netdata`|The directory the memory database will be stored if and when Netdata exits. Netdata will re-read the database when it will start again, to continue from the same point.|
+| lib directory|`/var/lib/netdata`|Contains the alarm log and the Netdata instance guid.|
+| home directory|`/var/cache/netdata`|Contains the db files for the collected metrics|
+| plugins directory|`"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"`|The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes.|
| memory mode | `dbengine` | `dbengine`: The default for long-term metrics storage with efficient RAM and disk usage. Can be extended with `page cache size` and `dbengine disk space`. <br />`save`: Netdata will save its round robin database on exit and load it on startup. <br />`map`: Cache files will be updated in real-time. Not ideal for systems with high load or slow disks (check `man mmap`). <br />`ram`: The round-robin database will be temporary and it will be lost when Netdata exits. <br />`none`: Disables the database at this host, and disables health monitoring entirely, as that requires a database of metrics. |
-| page cache size | 32 | Determines the amount of RAM in MiB that is dedicated to caching Netdata metric values. |||
-| dbengine disk space | 256 | Determines the amount of disk space in MiB that is dedicated to storing Netdata metric values and all related metadata describing them. |||
-| dbengine multihost disk space | 256 | Same functionality as `dbengine disk space`, but includes support for storing metrics streamed to a parent node by its children. Can be used in single-node environments as well. |||
-| host access prefix||This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43).|
-| memory deduplication (ksm)|`yes`|When set to `yes`, Netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](/database/README.md#ksm)|||
-| TZ environment variable|`:/etc/localtime`|Where to find the timezone|||
-| timezone|auto-detected|The timezone retrieved from the environment variable|||
-| debug flags|`0x0000000000000000`|Bitmap of debug options to enable. For more information check [Tracing Options](/daemon/README.md#debugging).|||
-| debug log|`/var/log/netdata/debug.log`|The filename to save debug information. This file will not be created if debugging is not enabled. You can also set it to `syslog` to send the debug messages to syslog, or `none` to disable this log. For more information check [Tracing Options](/daemon/README.md#debugging).|||
-| error log|`/var/log/netdata/error.log`|The filename to save error messages for Netdata daemon and all plugins (`stderr` is sent here for all Netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log.|||
-| access log|`/var/log/netdata/access.log`|The filename to save the log of web clients accessing Netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log.|||
-| errors flood protection period|`1200`|Length of period (in sec) during which the number of errors should not exceed the `errors to trigger flood protection`.|||
-| errors to trigger flood protection|`200`|Number of errors written to the log in `errors flood protection period` sec before flood protection is activated.|||
-| run as user|`netdata`|The user Netdata will run as.|||
-| pthread stack size|auto-detected||||
-| cleanup obsolete charts after seconds|`3600`|See [monitoring ephemeral containers](/collectors/cgroups.plugin/README.md#monitoring-ephemeral-containers), also sets the timeout for cleaning up obsolete dimensions|||
-| gap when lost iterations above|`1`||||
-| cleanup orphan hosts after seconds|`3600`|How long to wait until automatically removing from the DB a remote Netdata host (child) that is no longer sending data.|||
-| delete obsolete charts files|`yes`|See [monitoring ephemeral containers](/collectors/cgroups.plugin/README.md#monitoring-ephemeral-containers), also affects the deletion of files for obsolete dimensions|||
-| delete orphan hosts files|`yes`|Set to `no` to disable non-responsive host removal.|||
-| enable zero metrics|`no`|Set to `yes` to show charts when all their metrics are zero.|||
+| page cache size | 32 | Determines the amount of RAM in MiB that is dedicated to caching Netdata metric values. |
+| dbengine disk space | 256 | Determines the amount of disk space in MiB that is dedicated to storing Netdata metric values and all related metadata describing them. |
+| dbengine multihost disk space | 256 | Same functionality as `dbengine disk space`, but includes support for storing metrics streamed to a parent node by its children. Can be used in single-node environments as well. |
+| host access prefix| |This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43).|
+| memory deduplication (ksm)|`yes`|When set to `yes`, Netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](/database/README.md#ksm)|
+| TZ environment variable|`:/etc/localtime`|Where to find the timezone|
+| timezone|auto-detected|The timezone retrieved from the environment variable|
+| debug flags|`0x0000000000000000`|Bitmap of debug options to enable. For more information check [Tracing Options](/daemon/README.md#debugging).|
+| debug log|`/var/log/netdata/debug.log`|The filename to save debug information. This file will not be created if debugging is not enabled. You can also set it to `syslog` to send the debug messages to syslog, or `none` to disable this log. For more information check [Tracing Options](/daemon/README.md#debugging).|
+| error log|`/var/log/netdata/error.log`|The filename to save error messages for Netdata daemon and all plugins (`stderr` is sent here for all Netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log.|
+| access log|`/var/log/netdata/access.log`|The filename to save the log of web clients accessing Netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log.|
+| errors flood protection period|`1200`|Length of period (in sec) during which the number of errors should not exceed the `errors to trigger flood protection`.|
+| errors to trigger flood protection|`200`|Number of errors written to the log in `errors flood protection period` sec before flood protection is activated.|
+| run as user|`netdata`|The user Netdata will run as.|
+| pthread stack size|auto-detected||
+| cleanup obsolete charts after seconds|`3600`|See [monitoring ephemeral containers](/collectors/cgroups.plugin/README.md#monitoring-ephemeral-containers), also sets the timeout for cleaning up obsolete dimensions|
+| gap when lost iterations above|`1`||
+| cleanup orphan hosts after seconds|`3600`|How long to wait until automatically removing from the DB a remote Netdata host (child) that is no longer sending data.|
+| delete obsolete charts files|`yes`|See [monitoring ephemeral containers](/collectors/cgroups.plugin/README.md#monitoring-ephemeral-containers), also affects the deletion of files for obsolete dimensions|
+| delete orphan hosts files|`yes`|Set to `no` to disable non-responsive host removal.|
+| enable zero metrics|`no`|Set to `yes` to show charts when all their metrics are zero.|
### [web] section options
@@ -129,10 +128,6 @@ monitoring](/health/README.md).
To understand what this section is and how it should be configured, please refer to the [registry documentation](/registry/README.md).
-### [backend]
-
-Refer to the [streaming and replication](/streaming/README.md) documentation.
-
## Per-plugin configuration
The configuration options for plugins appear in sections following the pattern `[plugin:NAME]`.
@@ -227,4 +222,4 @@ multiplying the value of `out` by -1, Netdata creates the negative values seen i
![The system.io chart on a macOS
laptop](https://user-images.githubusercontent.com/1153921/69286708-2cfb3900-0bb1-11ea-9fcd-dd8fbb2adf11.png)
-[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdaemon%2Fconfig%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)
+
diff --git a/daemon/daemon.c b/daemon/daemon.c
index 68e161a3f..2b8a6552b 100644
--- a/daemon/daemon.c
+++ b/daemon/daemon.c
@@ -102,7 +102,11 @@ int become_user(const char *username, int pid_fd) {
gid_t *supplementary_groups = NULL;
if(ngroups > 0) {
supplementary_groups = mallocz(sizeof(gid_t) * ngroups);
+#ifdef __APPLE__
+ if(getgrouplist(username, gid, (int *)supplementary_groups, &ngroups) == -1) {
+#else
if(getgrouplist(username, gid, supplementary_groups, &ngroups) == -1) {
+#endif /* __APPLE__ */
if(am_i_root)
error("Cannot get supplementary groups of user '%s'.", username);
@@ -173,7 +177,7 @@ int become_user(const char *username, int pid_fd) {
static void oom_score_adj(void) {
char buf[30 + 1];
- long long int old_score, wanted_score = OOM_SCORE_ADJ_MAX, final_score = 0;
+ long long int old_score, wanted_score = 0, final_score = 0;
// read the existing score
if(read_single_signed_number_file("/proc/self/oom_score_adj", &old_score)) {
@@ -271,8 +275,8 @@ struct sched_def {
// the available members are important too!
// these are all the possible scheduling policies supported by netdata
-#ifdef SCHED_IDLE
- { "idle", SCHED_IDLE, 0, SCHED_FLAG_NONE },
+#ifdef SCHED_BATCH
+ { "batch", SCHED_BATCH, 0, SCHED_FLAG_USE_NICE },
#endif
#ifdef SCHED_OTHER
@@ -280,6 +284,10 @@ struct sched_def {
{ "nice", SCHED_OTHER, 0, SCHED_FLAG_USE_NICE },
#endif
+#ifdef SCHED_IDLE
+ { "idle", SCHED_IDLE, 0, SCHED_FLAG_NONE },
+#endif
+
#ifdef SCHED_RR
{ "rr", SCHED_RR, 0, SCHED_FLAG_PRIORITY_CONFIGURABLE },
#endif
@@ -288,10 +296,6 @@ struct sched_def {
{ "fifo", SCHED_FIFO, 0, SCHED_FLAG_PRIORITY_CONFIGURABLE },
#endif
-#ifdef SCHED_BATCH
- { "batch", SCHED_BATCH, 0, SCHED_FLAG_USE_NICE },
-#endif
-
// do not change the scheduling priority
{ "keep", 0, 0, SCHED_FLAG_KEEP_AS_IS },
{ "none", 0, 0, SCHED_FLAG_KEEP_AS_IS },
@@ -339,13 +343,7 @@ static void sched_getscheduler_report(void) {
}
}
}
-#else // !HAVE_SCHED_GETSCHEDULER
-static void sched_getscheduler_report(void) {
-#ifdef HAVE_GETPRIORITY
- info("Running with priority %d", getpriority(PRIO_PROCESS, 0));
-#endif // HAVE_GETPRIORITY
-}
-#endif // !HAVE_SCHED_GETSCHEDULER
+#endif /* HAVE_SCHED_GETSCHEDULER */
#ifdef HAVE_SCHED_SETSCHEDULER
@@ -418,11 +416,11 @@ fallback:
report:
sched_getscheduler_report();
}
-#else // !HAVE_SCHED_SETSCHEDULER
+#else /* HAVE_SCHED_SETSCHEDULER */
static void sched_setscheduler_set(void) {
process_nice_level();
}
-#endif // !HAVE_SCHED_SETSCHEDULER
+#endif /* HAVE_SCHED_SETSCHEDULER */
int become_daemon(int dont_fork, const char *user)
{
diff --git a/daemon/get-kubernetes-labels.sh.in b/daemon/get-kubernetes-labels.sh.in
index 5aa89ab9d..7e11ba3dd 100644
--- a/daemon/get-kubernetes-labels.sh.in
+++ b/daemon/get-kubernetes-labels.sh.in
@@ -1,6 +1,8 @@
#!/usr/bin/env bash
-# Checks if netdata is running in a kubernetes pod and fetches that pod's labels
+# Checks if netdata is running in a kubernetes pod and fetches:
+# - pod's labels
+# - kubernetes cluster name (GKE only)
if [ -z "${KUBERNETES_SERVICE_HOST}" ] || [ -z "${KUBERNETES_PORT_443_TCP_PORT}" ] || [ -z "${MY_POD_NAMESPACE}" ] || [ -z "${MY_POD_NAME}" ]; then
exit 0
@@ -37,5 +39,20 @@ if ! KUBE_SYSTEM_NS_UID=$(jq -r '.metadata.uid' <<< "$KUBE_SYSTEM_NS_DATA" 2>&1)
exit 1
fi
-echo -e "$POD_LABELS\nk8s_cluster_id:$KUBE_SYSTEM_NS_UID"
+LABELS="$POD_LABELS\nk8s_cluster_id:$KUBE_SYSTEM_NS_UID"
+
+GCP_META_HEADER="Metadata-Flavor: Google"
+GCP_META_URL="http://metadata/computeMetadata/v1"
+GKE_CLUSTER_NAME=""
+
+if id=$(curl --fail -s -m 5 --noproxy "*" -H "$GCP_META_HEADER" "$GCP_META_URL/project/project-id"); then
+ loc=$(curl --fail -s -m 5 --noproxy "*" -H "$GCP_META_HEADER" "$GCP_META_URL/instance/attributes/cluster-location")
+ name=$(curl --fail -s -m 5 --noproxy "*" -H "$GCP_META_HEADER" "$GCP_META_URL/instance/attributes/cluster-name")
+ [ -n "$id" ] && [ -n "$loc" ] && [ -n "$name" ] && GKE_CLUSTER_NAME="gke_${id}_${loc}_${name}"
+fi
+
+[ -n "$GKE_CLUSTER_NAME" ] && LABELS+="\nk8s_cluster_name:$GKE_CLUSTER_NAME"
+
+echo -e "$LABELS"
+
exit 0
diff --git a/daemon/global_statistics.c b/daemon/global_statistics.c
index f4f3e5762..d5cc03159 100644
--- a/daemon/global_statistics.c
+++ b/daemon/global_statistics.c
@@ -37,7 +37,7 @@ static struct global_statistics {
.rrdr_result_points_generated = 0,
};
-#if defined(HAVE_C___ATOMIC) && !defined(NETDATA_NO_ATOMIC_INSTRUCTIONS)
+#if defined(HAVE_C___ATOMIC)
#else
netdata_mutex_t global_statistics_mutex = NETDATA_MUTEX_INITIALIZER;
@@ -52,7 +52,7 @@ static inline void global_statistics_unlock(void) {
void rrdr_query_completed(uint64_t db_points_read, uint64_t result_points_generated) {
-#if defined(HAVE_C___ATOMIC) && !defined(NETDATA_NO_ATOMIC_INSTRUCTIONS)
+#if defined(HAVE_C___ATOMIC)
__atomic_fetch_add(&global_statistics.rrdr_queries_made, 1, __ATOMIC_SEQ_CST);
__atomic_fetch_add(&global_statistics.rrdr_db_points_read, db_points_read, __ATOMIC_SEQ_CST);
__atomic_fetch_add(&global_statistics.rrdr_result_points_generated, result_points_generated, __ATOMIC_SEQ_CST);
@@ -75,7 +75,7 @@ void finished_web_request_statistics(uint64_t dt,
uint64_t bytes_sent,
uint64_t content_size,
uint64_t compressed_content_size) {
-#if defined(HAVE_C___ATOMIC) && !defined(NETDATA_NO_ATOMIC_INSTRUCTIONS)
+#if defined(HAVE_C___ATOMIC)
uint64_t old_web_usec_max = global_statistics.web_usec_max;
while(dt > old_web_usec_max)
__atomic_compare_exchange(&global_statistics.web_usec_max, &old_web_usec_max, &dt, 1, __ATOMIC_SEQ_CST, __ATOMIC_SEQ_CST);
@@ -107,7 +107,7 @@ void finished_web_request_statistics(uint64_t dt,
}
uint64_t web_client_connected(void) {
-#if defined(HAVE_C___ATOMIC) && !defined(NETDATA_NO_ATOMIC_INSTRUCTIONS)
+#if defined(HAVE_C___ATOMIC)
__atomic_fetch_add(&global_statistics.connected_clients, 1, __ATOMIC_SEQ_CST);
uint64_t id = __atomic_fetch_add(&global_statistics.web_client_count, 1, __ATOMIC_SEQ_CST);
#else
@@ -125,7 +125,7 @@ uint64_t web_client_connected(void) {
}
void web_client_disconnected(void) {
-#if defined(HAVE_C___ATOMIC) && !defined(NETDATA_NO_ATOMIC_INSTRUCTIONS)
+#if defined(HAVE_C___ATOMIC)
__atomic_fetch_sub(&global_statistics.connected_clients, 1, __ATOMIC_SEQ_CST);
#else
if (web_server_is_multithreaded)
@@ -140,7 +140,7 @@ void web_client_disconnected(void) {
static inline void global_statistics_copy(struct global_statistics *gs, uint8_t options) {
-#if defined(HAVE_C___ATOMIC) && !defined(NETDATA_NO_ATOMIC_INSTRUCTIONS)
+#if defined(HAVE_C___ATOMIC)
gs->connected_clients = __atomic_fetch_add(&global_statistics.connected_clients, 0, __ATOMIC_SEQ_CST);
gs->web_requests = __atomic_fetch_add(&global_statistics.web_requests, 0, __ATOMIC_SEQ_CST);
gs->web_usec = __atomic_fetch_add(&global_statistics.web_usec, 0, __ATOMIC_SEQ_CST);
diff --git a/daemon/main.c b/daemon/main.c
index 7c8e09a5f..c18778974 100644
--- a/daemon/main.c
+++ b/daemon/main.c
@@ -250,6 +250,8 @@ void cancel_main_threads() {
else
info("All threads finished.");
+ for (i = 0; static_threads[i].name != NULL ; i++)
+ freez(static_threads[i].thread);
free(static_threads);
}
@@ -445,15 +447,6 @@ static void backwards_compatible_config() {
config_move(CONFIG_SECTION_GLOBAL, "web compression level",
CONFIG_SECTION_WEB, "gzip compression level");
-
- config_move(CONFIG_SECTION_GLOBAL, "web files owner",
- CONFIG_SECTION_WEB, "web files owner");
-
- config_move(CONFIG_SECTION_GLOBAL, "web files group",
- CONFIG_SECTION_WEB, "web files group");
-
- config_move(CONFIG_SECTION_BACKEND, "opentsdb host tags",
- CONFIG_SECTION_BACKEND, "host tags");
}
static void get_netdata_configured_variables() {
@@ -690,6 +683,7 @@ int main(int argc, char **argv) {
int i;
int config_loaded = 0;
int dont_fork = 0;
+ bool close_open_fds = true;
size_t default_stacksize;
char *user = NULL;
@@ -794,8 +788,13 @@ int main(int argc, char **argv) {
}
if(strcmp(optarg, "unittest") == 0) {
- if(unit_test_buffer()) return 1;
- if(unit_test_str2ld()) return 1;
+ if (unit_test_static_threads())
+ return 1;
+ if (unit_test_buffer())
+ return 1;
+ if (unit_test_str2ld())
+ return 1;
+
// No call to load the config file on this code-path
post_conf_load(&user);
get_netdata_configured_variables();
@@ -1038,7 +1037,13 @@ int main(int argc, char **argv) {
print_build_info_json();
return 0;
}
- else {
+ else if(strcmp(optarg, "keepopenfds") == 0) {
+ // Internal dev option to skip closing inherited
+ // open FDs. Useful, when we want to run the agent
+ // under profiling tools that open/maintain their
+ // own FDs.
+ close_open_fds = false;
+ } else {
fprintf(stderr, "Unknown -W parameter '%s'\n", optarg);
return help(1);
}
@@ -1053,12 +1058,12 @@ int main(int argc, char **argv) {
}
#ifdef _SC_OPEN_MAX
- // close all open file descriptors, except the standard ones
- // the caller may have left open files (lxc-attach has this issue)
- {
- int fd;
- for(fd = (int) (sysconf(_SC_OPEN_MAX) - 1); fd > 2; fd--)
- if(fd_is_valid(fd)) close(fd);
+ if (close_open_fds == true) {
+ // close all open file descriptors, except the standard ones
+ // the caller may have left open files (lxc-attach has this issue)
+ for(int fd = (int) (sysconf(_SC_OPEN_MAX) - 1); fd > 2; fd--)
+ if(fd_is_valid(fd))
+ close(fd);
}
#endif
@@ -1205,11 +1210,6 @@ int main(int argc, char **argv) {
info("netdata started on pid %d.", getpid());
- // IMPORTANT: these have to run once, while single threaded
- // but after we have switched user
- web_files_uid();
- web_files_gid();
-
netdata_threads_init_after_fork((size_t)config_get_number(CONFIG_SECTION_GLOBAL, "pthread stack size", (long)default_stacksize));
// initialize internal registry
@@ -1232,6 +1232,7 @@ int main(int argc, char **argv) {
struct rrdhost_system_info *system_info = calloc(1, sizeof(struct rrdhost_system_info));
get_system_info(system_info);
system_info->hops = 0;
+ get_install_type(&system_info->install_type, &system_info->prebuilt_arch, &system_info->prebuilt_dist);
if(rrd_init(netdata_configured_hostname, system_info))
fatal("Cannot initialize localhost instance with name '%s'.", netdata_configured_hostname);
@@ -1317,12 +1318,6 @@ int main(int argc, char **argv) {
snprintfz(filename, FILENAME_MAX, "%s/.aclk_report_sent", netdata_configured_varlib_dir);
if (netdata_anonymous_statistics_enabled > 0 && access(filename, F_OK)) { // -1 -> not initialized
send_statistics("ACLK_DISABLED", "-", "-");
-#ifdef ACLK_NO_LWS
- send_statistics("BUILD_FAIL_LWS", "-", "-");
-#endif
-#ifdef ACLK_NO_LIBMOSQ
- send_statistics("BUILD_FAIL_MOSQ", "-", "-");
-#endif
int fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 444);
if (fd == -1)
error("Cannot create file '%s'. Please fix this.", filename);
diff --git a/daemon/service.c b/daemon/service.c
index d3a4e5500..61cc1281a 100644
--- a/daemon/service.c
+++ b/daemon/service.c
@@ -31,6 +31,11 @@ void *service_main(void *ptr)
heartbeat_next(&hb, step);
rrd_cleanup_obsolete_charts();
+
+ rrd_wrlock();
+ rrdhost_cleanup_orphan_hosts_nolock(localhost);
+ rrd_unlock();
+
}
netdata_thread_cleanup_pop(1);
diff --git a/daemon/static_threads.c b/daemon/static_threads.c
index 534b3c3d8..c07473bd6 100644
--- a/daemon/static_threads.c
+++ b/daemon/static_threads.c
@@ -11,9 +11,19 @@ extern void *health_main(void *ptr);
extern void *pluginsd_main(void *ptr);
extern void *service_main(void *ptr);
extern void *statsd_main(void *ptr);
+extern void *timex_main(void *ptr);
const struct netdata_static_thread static_threads_common[] = {
{
+ .name = "PLUGIN[timex]",
+ .config_section = CONFIG_SECTION_PLUGINS,
+ .config_name = "timex",
+ .enabled = 1,
+ .thread = NULL,
+ .init_routine = NULL,
+ .start_routine = timex_main
+ },
+ {
.name = "PLUGIN[check]",
.config_section = CONFIG_SECTION_PLUGINS,
.config_name = "checks",
@@ -86,15 +96,6 @@ const struct netdata_static_thread static_threads_common[] = {
.start_routine = statsd_main
},
{
- .name = "BACKENDS",
- .config_section = NULL,
- .config_name = NULL,
- .enabled = 1,
- .thread = NULL,
- .init_routine = NULL,
- .start_routine = backends_main
- },
- {
.name = "EXPORTING",
.config_section = NULL,
.config_name = NULL,
diff --git a/daemon/static_threads_linux.c b/daemon/static_threads_linux.c
index e55c0fec7..5f7a67768 100644
--- a/daemon/static_threads_linux.c
+++ b/daemon/static_threads_linux.c
@@ -10,15 +10,6 @@ extern void *timex_main(void *ptr);
const struct netdata_static_thread static_threads_linux[] = {
{
- .name = "PLUGIN[timex]",
- .config_section = CONFIG_SECTION_PLUGINS,
- .config_name = "timex",
- .enabled = 1,
- .thread = NULL,
- .init_routine = NULL,
- .start_routine = timex_main
- },
- {
.name = "PLUGIN[tc]",
.config_section = CONFIG_SECTION_PLUGINS,
.config_name = "tc",
diff --git a/daemon/system-info.sh b/daemon/system-info.sh
index 728e38091..7fb2f25b5 100755
--- a/daemon/system-info.sh
+++ b/daemon/system-info.sh
@@ -21,7 +21,7 @@ if [ -z "${VIRTUALIZATION}" ]; then
if [ -n "$(command -v systemd-detect-virt 2> /dev/null)" ]; then
VIRTUALIZATION="$(systemd-detect-virt -v)"
VIRT_DETECTION="systemd-detect-virt"
- CONTAINER="$(systemd-detect-virt -c)"
+ CONTAINER=${CONTAINER:-$(systemd-detect-virt -c)}
CONT_DETECTION="systemd-detect-virt"
else
if grep -q "^flags.*hypervisor" /proc/cpuinfo 2> /dev/null; then
@@ -153,7 +153,6 @@ if [ "${CONTAINER}" = "unknown" ] || [ "${CONTAINER}" = "none" ]; then
else
# Otherwise try and use a user-supplied bind-mount into the container to resolve the host details
if [ -e "/host/etc/os-release" ]; then
- OS_DETECTION="/etc/os-release"
eval "$(grep -E "^(NAME|ID|ID_LIKE|VERSION|VERSION_ID)=" < /host/etc/os-release | sed 's/^/HOST_/')"
HOST_OS_DETECTION="/host/etc/os-release"
fi
@@ -197,10 +196,14 @@ if [ -n "${lscpu}" ] && lscpu > /dev/null 2>&1; then
LCPU_COUNT="$(echo "${lscpu_output}" | grep "^CPU(s):" | cut -f 2 -d ':' | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//')"
CPU_VENDOR="$(echo "${lscpu_output}" | grep "^Vendor ID:" | cut -f 2 -d ':' | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//')"
CPU_MODEL="$(echo "${lscpu_output}" | grep "^Model name:" | cut -f 2 -d ':' | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//')"
- possible_cpu_freq="$(echo "${lscpu_output}" | grep -F "CPU max MHz:" | cut -f 2 -d ':' | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' | grep -o '^[0-9]*') MHz"
- if [ "${possible_cpu_freq}" = " MHz" ]; then
- possible_cpu_freq="$(echo "${lscpu_output}" | grep -F "CPU MHz:" | cut -f 2 -d ':' | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' | grep -o '^[0-9]*') MHz"
+ possible_cpu_freq="$(echo "${lscpu_output}" | grep -F "CPU max MHz:" | cut -f 2 -d ':' | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' | grep -o '^[0-9]*')"
+ if [ -z "$possible_cpu_freq" ]; then
+ possible_cpu_freq="$(echo "${lscpu_output}" | grep -F "CPU MHz:" | cut -f 2 -d ':' | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' | grep -o '^[0-9]*')"
fi
+ if [ -z "$possible_cpu_freq" ]; then
+ possible_cpu_freq="$(echo "${lscpu_output}" | grep "^Model name:" | grep -Eo "[0-9\.]+GHz" | grep -o "^[0-9\.]*" | awk '{print int($0*1000)}')"
+ fi
+ [ -n "$possible_cpu_freq" ] && possible_cpu_freq="${possible_cpu_freq} MHz"
elif [ -n "${dmidecode}" ] && dmidecode -t processor > /dev/null 2>&1; then
dmidecode_output="$(${dmidecode} -t processor 2> /dev/null)"
CPU_INFO_SOURCE="dmidecode"
@@ -215,6 +218,13 @@ else
elif [ "${KERNEL_NAME}" = FreeBSD ]; then
CPU_INFO_SOURCE="sysctl"
LCPU_COUNT="$(sysctl -n kern.smp.cpus)"
+ if ! possible_cpu_freq=$(sysctl -n machdep.tsc_freq 2> /dev/null); then
+ possible_cpu_freq=$(sysctl -n hw.model 2> /dev/null | grep -Eo "[0-9\.]+GHz" | grep -o "^[0-9\.]*" | awk '{print int($0*1000)}')
+ [ -n "$possible_cpu_freq" ] && possible_cpu_freq="${possible_cpu_freq} MHz"
+ fi
+ elif [ "${KERNEL_NAME}" = Darwin ]; then
+ CPU_INFO_SOURCE="sysctl"
+ LCPU_COUNT="$(sysctl -n hw.logicalcpu)"
elif [ -d /sys/devices/system/cpu ]; then
CPU_INFO_SOURCE="sysfs"
# This is potentially more accurate than checking `/proc/cpuinfo`.
@@ -224,8 +234,15 @@ else
LCPU_COUNT="$(grep -c ^processor /proc/cpuinfo)"
fi
- # If we have GNU uname, we can use that to get CPU info (probably).
- if uname --version 2> /dev/null | grep -qF 'GNU coreutils'; then
+ if [ "${KERNEL_NAME}" = Darwin ]; then
+ CPU_MODEL="$(sysctl -n machdep.cpu.brand_string)"
+ if [ "${ARCHITECTURE}" = "x86_64" ]; then
+ CPU_VENDOR="$(sysctl -n machdep.cpu.vendor)"
+ else
+ CPU_VENDOR="Apple"
+ fi
+ echo "${CPU_INFO_SOURCE}" | grep -qv sysctl && CPU_INFO_SOURCE="${CPU_INFO_SOURCE} sysctl"
+ elif uname --version 2> /dev/null | grep -qF 'GNU coreutils'; then
CPU_INFO_SOURCE="${CPU_INFO_SOURCE} uname"
CPU_MODEL="$(uname -p)"
CPU_VENDOR="$(uname -i)"
@@ -245,12 +262,15 @@ else
fi
fi
-if [ -r /sys/devices/system/cpu/cpu0/cpufreq/base_frequency ]; then
+if [ "${KERNEL_NAME}" = Darwin ] && [ "${ARCHITECTURE}" = "x86_64" ]; then
+ CPU_FREQ="$(sysctl -n hw.cpufrequency)"
+elif [ -r /sys/devices/system/cpu/cpu0/cpufreq/base_frequency ]; then
if (echo "${CPU_INFO_SOURCE}" | grep -qv sysfs); then
CPU_INFO_SOURCE="${CPU_INFO_SOURCE} sysfs"
fi
- CPU_FREQ="$(cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency)"
+ value="$(cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency)"
+ CPU_FREQ="$((value * 1000))"
elif [ -n "${possible_cpu_freq}" ]; then
CPU_FREQ="${possible_cpu_freq}"
elif [ -r /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq ]; then
@@ -258,7 +278,14 @@ elif [ -r /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq ]; then
CPU_INFO_SOURCE="${CPU_INFO_SOURCE} sysfs"
fi
- CPU_FREQ="$(cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq)"
+ value="$(cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq)"
+ CPU_FREQ="$((value * 1000))"
+elif [ -r /proc/cpuinfo ]; then
+ if (echo "${CPU_INFO_SOURCE}" | grep -qv procfs); then
+ CPU_INFO_SOURCE="${CPU_INFO_SOURCE} procfs"
+ fi
+ value=$(grep "cpu MHz" /proc/cpuinfo 2>/dev/null | grep -o "[0-9]*" | head -n 1 | awk '{print int($0*1000000)}')
+ [ -n "$value" ] && CPU_FREQ="$value"
fi
freq_units="$(echo "${CPU_FREQ}" | cut -f 2 -d ' ')"
@@ -376,6 +403,47 @@ elif pgrep "kubelet"; then
HOST_IS_K8S_NODE="true"
fi
+# ------------------------------------------------------------------------------------------------
+# Detect instance metadata for VMs running on cloud providers
+
+CLOUD_TYPE="unknown"
+CLOUD_INSTANCE_TYPE="unknown"
+CLOUD_INSTANCE_REGION="unknown"
+
+if [ "${VIRTUALIZATION}" != "none" ] && command -v curl > /dev/null 2>&1; then
+ # Try AWS IMDSv2
+ if [ "${CLOUD_TYPE}" = "unknown" ]; then
+ AWS_IMDS_TOKEN="$(curl --fail -s -m 5 --noproxy "*" -X PUT "http://169.254.169.254/latest/api/token" -H "X-aws-ec2-metadata-token-ttl-seconds: 21600")"
+ if [ -n "${AWS_IMDS_TOKEN}" ]; then
+ CLOUD_TYPE="AWS"
+ CLOUD_INSTANCE_TYPE="$(curl --fail -s -m 5 --noproxy "*" -H "X-aws-ec2-metadata-token: $AWS_IMDS_TOKEN" -v "http://169.254.169.254/latest/meta-data/instance-type" 2> /dev/null)"
+ CLOUD_INSTANCE_REGION="$(curl --fail -s -m 5 --noproxy "*" -H "X-aws-ec2-metadata-token: $AWS_IMDS_TOKEN" -v "http://169.254.169.254/latest/meta-data/placement/region" 2> /dev/null)"
+ fi
+ fi
+
+ # Try GCE computeMetadata v1
+ if [ "${CLOUD_TYPE}" = "unknown" ]; then
+ if [ -n "$(curl --fail -s -m 5 --noproxy "*" -H "Metadata-Flavor: Google" "http://metadata.google.internal/computeMetadata/v1")" ]; then
+ CLOUD_TYPE="GCP"
+ CLOUD_INSTANCE_TYPE="$(curl --fail -s -m 5 --noproxy "*" -H "Metadata-Flavor: Google" "http://metadata.google.internal/computeMetadata/v1/instance/machine-type")"
+ [ -n "$CLOUD_INSTANCE_TYPE" ] && CLOUD_INSTANCE_TYPE=$(basename "$CLOUD_INSTANCE_TYPE")
+ CLOUD_INSTANCE_REGION="$(curl --fail -s -m 5 --noproxy "*" -H "Metadata-Flavor: Google" "http://metadata.google.internal/computeMetadata/v1/instance/zone")"
+ [ -n "$CLOUD_INSTANCE_REGION" ] && CLOUD_INSTANCE_REGION=$(basename "$CLOUD_INSTANCE_REGION") && CLOUD_INSTANCE_REGION=${CLOUD_INSTANCE_REGION%-*}
+ fi
+ fi
+
+ # TODO: needs to be tested in Microsoft Azure
+ # Try Azure IMDS
+ # if [ "${CLOUD_TYPE}" = "unknown" ]; then
+ # AZURE_IMDS_DATA="$(curl --fail -s -m 5 -H "Metadata: true" --noproxy "*" "http://169.254.169.254/metadata/instance?version=2021-10-01")"
+ # if [ -n "${AZURE_IMDS_DATA}" ]; then
+ # CLOUD_TYPE="Azure"
+ # CLOUD_INSTANCE_TYPE="$(curl --fail -s -m 5 -H "Metadata: true" --noproxy "*" "http://169.254.169.254/metadata/instance/compute/vmSize?version=2021-10-01&format=text")"
+ # CLOUD_INSTANCE_REGION="$(curl --fail -s -m 5 -H "Metadata: true" --noproxy "*" "http://169.254.169.254/metadata/instance/compute/location?version=2021-10-01&format=text")"
+ # fi
+ # fi
+fi
+
echo "NETDATA_CONTAINER_OS_NAME=${CONTAINER_NAME}"
echo "NETDATA_CONTAINER_OS_ID=${CONTAINER_ID}"
echo "NETDATA_CONTAINER_OS_ID_LIKE=${CONTAINER_ID_LIKE}"
@@ -406,3 +474,6 @@ echo "NETDATA_SYSTEM_TOTAL_RAM=${TOTAL_RAM}"
echo "NETDATA_SYSTEM_RAM_DETECTION=${RAM_DETECTION}"
echo "NETDATA_SYSTEM_TOTAL_DISK_SIZE=${DISK_SIZE}"
echo "NETDATA_SYSTEM_DISK_DETECTION=${DISK_DETECTION}"
+echo "NETDATA_INSTANCE_CLOUD_TYPE=${CLOUD_TYPE}"
+echo "NETDATA_INSTANCE_CLOUD_INSTANCE_TYPE=${CLOUD_INSTANCE_TYPE}"
+echo "NETDATA_INSTANCE_CLOUD_INSTANCE_REGION=${CLOUD_INSTANCE_REGION}"
diff --git a/daemon/unit_test.c b/daemon/unit_test.c
index 456dff961..7a52735d5 100644
--- a/daemon/unit_test.c
+++ b/daemon/unit_test.c
@@ -404,6 +404,44 @@ int unit_test_buffer() {
return 0;
}
+int unit_test_static_threads() {
+ struct netdata_static_thread *static_threads = static_threads_get();
+
+ /*
+ * make sure enough static threads have been registered
+ */
+ if (!static_threads) {
+ fprintf(stderr, "empty static_threads array\n");
+ return 1;
+ }
+
+ int n;
+ for (n = 0; static_threads[n].start_routine != NULL; n++) {}
+
+ if (n < 2) {
+ fprintf(stderr, "only %d static threads registered", n);
+ freez(static_threads);
+ return 1;
+ }
+
+ /*
+ * verify that each thread's start routine is unique.
+ */
+ for (int i = 0; i != n - 1; i++) {
+ for (int j = i + 1; j != n; j++) {
+ if (static_threads[i].start_routine != static_threads[j].start_routine)
+ continue;
+
+ fprintf(stderr, "Found duplicate threads with name: %s\n", static_threads[i].name);
+ freez(static_threads);
+ return 1;
+ }
+ }
+
+ freez(static_threads);
+ return 0;
+}
+
// --------------------------------------------------------------------------------------------------------------------
struct feed_values {
@@ -1521,7 +1559,7 @@ static RRDHOST *dbengine_rrdhost_find_or_create(char *name)
, netdata_configured_timezone
, netdata_configured_abbrev_timezone
, netdata_configured_utc_offset
- , config_get(CONFIG_SECTION_BACKEND, "host tags", "")
+ , ""
, program_name
, program_version
, default_rrd_update_every
@@ -1694,7 +1732,7 @@ static int test_dbengine_check_rrdr(RRDSET *st[CHARTS], RRDDIM *rd[CHARTS][DIMS]
update_every = REGION_UPDATE_EVERY[current_region];
long points = (time_end - time_start) / update_every;
for (i = 0 ; i < CHARTS ; ++i) {
- RRDR *r = rrd2rrdr(st[i], points, time_start + update_every, time_end, RRDR_GROUPING_AVERAGE, 0, 0, NULL, NULL);
+ RRDR *r = rrd2rrdr(st[i], points, time_start + update_every, time_end, RRDR_GROUPING_AVERAGE, 0, 0, NULL, NULL, 0);
if (!r) {
fprintf(stderr, " DB-engine unittest %s: empty RRDR ### E R R O R ###\n", st[i]->name);
return ++errors;
@@ -1813,7 +1851,7 @@ int test_dbengine(void)
long points = (time_end[REGIONS - 1] - time_start[0]) / update_every; // cover all time regions with RRDR
long point_offset = (time_start[current_region] - time_start[0]) / update_every;
for (i = 0 ; i < CHARTS ; ++i) {
- RRDR *r = rrd2rrdr(st[i], points, time_start[0] + update_every, time_end[REGIONS - 1], RRDR_GROUPING_AVERAGE, 0, 0, NULL, NULL);
+ RRDR *r = rrd2rrdr(st[i], points, time_start[0] + update_every, time_end[REGIONS - 1], RRDR_GROUPING_AVERAGE, 0, 0, NULL, NULL, 0);
if (!r) {
fprintf(stderr, " DB-engine unittest %s: empty RRDR ### E R R O R ###\n", st[i]->name);
++errors;
diff --git a/daemon/unit_test.h b/daemon/unit_test.h
index 3a3b64902..6a7a966c3 100644
--- a/daemon/unit_test.h
+++ b/daemon/unit_test.h
@@ -8,6 +8,7 @@ extern int unit_test(long delay, long shift);
extern int run_all_mockup_tests(void);
extern int unit_test_str2ld(void);
extern int unit_test_buffer(void);
+extern int unit_test_static_threads(void);
extern int test_sqlite(void);
#ifdef ENABLE_DBENGINE
extern int test_dbengine(void);