diff options
Diffstat (limited to 'docs/Running-behind-h2o.md')
| -rw-r--r-- | docs/Running-behind-h2o.md | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/docs/Running-behind-h2o.md b/docs/Running-behind-h2o.md new file mode 100644 index 00000000..c49e4e16 --- /dev/null +++ b/docs/Running-behind-h2o.md @@ -0,0 +1,183 @@ +<!-- +title: "Running Netdata behind H2O" +custom_edit_url: https://github.com/netdata/netdata/edit/master/docs/Running-behind-h2o.md +--> + +# Running Netdata behind H2O + +[H2O](https://h2o.examp1e.net/) is a new generation HTTP server that provides quicker response to users with less CPU utilization when compared to older generation of web servers. + +It is notable for having much simpler configuration than many popular HTTP servers, low resource requirements, and integrated native support for many things that other HTTP servers may need special setup to use. + +## Why H2O + +- Sane configuration defaults mean that typical configurations are very minimalistic and easy to work with. + +- Native support for HTTP/2 provides improved performance when accessing the Netdata dashboard remotely. + +- Password protect access to the Netdata dashboard without requiring Netdata Cloud. + +## H2O configuration file. + +On most systems, the H2O configuration is found under `/etc/h2o`. H2O uses [YAML 1.1](https://yaml.org/spec/1.1/), with a few special extensions, for it’s configuration files, with the main configuration file being `/etc/h2o/h2o.conf`. + +You can edit the H2O configuration file with Nano, Vim or any other text editors with which you are comfortable. + +After making changes to the configuration files, perform the following: + +- Test the configuration with `h2o -m test -c /etc/h2o/h2o.conf` + +- Restart H2O to apply tha changes with `/etc/init.d/h2o restart` or `service h2o restart` + +## Ways to access Netdata via H2O + +### As a virtual host + +With this method instead of `SERVER_IP_ADDRESS:19999`, the Netdata dashboard can be accessed via a human-readable URL such as `netdata.example.com` used in the configuration below. + +```yaml +hosts: + netdata.example.com: + listen: + port: 80 + paths: + /: + proxy.preserve-host: ON + proxy.reverse.url: http://127.0.0.1:19999 +``` + +### As a subfolder of an existing virtual host + +This method is recommended when Netdata is to be served from a subfolder (or directory). +In this case, the virtual host `netdata.example.com` already exists and Netdata has to be accessed via `netdata.example.com/netdata/`. + +```yaml +hosts: + netdata.example.com: + listen: + port: 80 + paths: + /netdata: + redirect: + status: 301 + url: /netdata/ + /netdata/: + proxy.preserve-host: ON + proxy.reverse.url: http://127.0.0.1:19999 +``` + +### As a subfolder for multiple Netdata servers, via one H2O instance + +This is the recommended configuration when one H2O instance will be used to manage multiple Netdata servers via subfolders. + +```yaml +hosts: + netdata.example.com: + listen: + port: 80 + paths: + /netdata/server1: + redirect: + status: 301 + url: /netdata/server1/ + /netdata/server1/: + proxy.preserve-host: ON + proxy.reverse.url: http://198.51.100.1:19999 + /netdata/server2: + redirect: + status: 301 + url: /netdata/server2/ + /netdata/server2/: + proxy.preserve-host: ON + proxy.reverse.url: http://198.51.100.2:19999 +``` + +Of course you can add as many backend servers as you like. + +Using the above, you access Netdata on the backend servers, like this: + +- `http://netdata.example.com/netdata/server1/` to reach Netdata on `198.51.100.1:19999` +- `http://netdata.example.com/netdata/server2/` to reach Netdata on `198.51.100.2:19999` + +### Encrypt the communication between H2O and Netdata + +In case Netdata's web server has been [configured to use TLS](/web/server/README.md#enabling-tls-support), it is +necessary to specify inside the H2O configuration that the final destination is using TLS. To do this, change the +`http://` on the `proxy.reverse.url` line in your H2O configuration with `https://` + +### Enable authentication + +Create an authentication file to enable basic authentication via H2O, this secures your Netdata dashboard. + +If you don't have an authentication file, you can use the following command: + +```sh +printf "yourusername:$(openssl passwd -apr1)" > /etc/h2o/passwords +``` + +And then add a basic authentication handler to each path definition: + +```yaml +hosts: + netdata.example.com: + listen: + port: 80 + paths: + /: + mruby.handler: | + require "htpasswd.rb" + Htpasswd.new("/etc/h2o/passwords", "netdata.example.com") + proxy.preserve-host: ON + proxy.reverse.url: http://127.0.0.1:19999 +``` + +For more information on using basic authentication with H2O, see [their official documentation](https://h2o.examp1e.net/configure/basic_auth.html). + +## Limit direct access to Netdata + +If your H2O server is on `localhost`, you can use this to ensure external access is only possible through H2O: + +``` +[web] + bind to = 127.0.0.1 ::1 +``` + +--- + +You can also use a unix domain socket. This will provide faster communication between H2O and Netdata as well: + +``` +[web] + bind to = unix:/run/netdata/netdata.sock +``` + +In the H2O configuration, use a line like the following to connect to Netdata via the unix socket: + +```yaml +proxy.reverse.url http://[unix:/run/netdata/netdata.sock] +``` + +--- + +If your H2O server is not on localhost, you can set: + +``` +[web] + bind to = * + allow connections from = IP_OF_H2O_SERVER +``` + +*note: Netdata v1.9+ support `allow connections from`* + +`allow connections from` accepts [Netdata simple patterns](/libnetdata/simple_pattern/README.md) to match against +the connection IP address. + +## Prevent the double access.log + +H2O logs accesses and Netdata logs them too. You can prevent Netdata from generating its access log, by setting +this in `/etc/netdata/netdata.conf`: + +``` +[global] + access log = none +``` |