1 files changed, 54 insertions, 0 deletions
diff --git a/health/guides/wifi/wifi_outbound_packets_dropped_ratio.md b/health/guides/wifi/wifi_outbound_packets_dropped_ratio.md
new file mode 100644
index 000000000..8441885df
--- /dev/null
+++ b/health/guides/wifi/wifi_outbound_packets_dropped_ratio.md
@@ -0,0 +1,54 @@
+### Understand the alert
+
+The `wifi_outbound_packets_dropped_ratio` alert indicates that a significant number of packets were dropped on the way to transmission over the last 10 minutes. This could be due to a lack of resources or other issues with the network interface.
+
+### What does dropped packets mean?
+
+Dropped packets refer to data packets that are discarded by a network interface instead of being transmitted through the network. This can occur for various reasons such as hardware failures, lack of resources (e.g., memory, processing power), or network congestion.
+
+### Troubleshoot the alert
+
+1. Check interface statistics
+
+Use the `ifconfig` command to view information about your network interfaces, including their packet drop rates. Look for the dropped packets count in the TX (transmit) section.
+
+```bash
+ifconfig <interface_name>
+```
+
+Replace `<interface_name>` with the name of the network interface you are investigating, such as `wlan0` for a wireless interface.
+
+2. Check system logs
+
+System logs can provide valuable information about any potential issues. Check the logs for any errors or warnings related to the network interface or driver.
+
+For example, use `dmesg` command to display kernel messages:
+
+```bash
+dmesg | grep -i "<interface_name>"
+```
+
+Replace `<interface_name>` with the name of the network interface you are investigating.
+
+3. Check for hardware issues
+
+Inspect the network interface for any signs of hardware failure or malfunction. This may include damaged cables, loose connections, or issues with other networking equipment (e.g. switches, routers).
+
+4. Monitor network congestion
+
+High packet drop rates can be caused by network congestion. Monitor network usage and performance using tools such as `iftop`, `nload`, or `vnstat`. Identify and address any traffic bottlenecks or excessive usage.
+
+5. Update network drivers
+
+Outdated or faulty network drivers may cause packet drop issues. Check for driver updates and install any available updates following the manufacturer's instructions.
+
+6. Optimize network settings
+
+You can adjust network settings, like buffers or queues, to mitigate dropped packets. Consult your operating system or network device documentation for specific recommendations on adjusting these settings.
+
+### Useful resources
+
+1. [ifconfig command in Linux](https://www.geeksforgeeks.org/ifconfig-command-in-linux-with-examples/)
+2. [How to monitor network usage with iftop](https://www.binarytides.com/monitor-network-usage-with-iftop/)
+3. [nload – Monitor Network Traffic and Bandwidth Usage in Real Time](https://www.tecmint.com/nload-monitor-linux-network-traffic-bandwidth-usage/)
+4. [VNstat – A Network Traffic Monitor](https://www.tecmint.com/vnstat-monitor-network-traffic-in-linux/)
+\ No newline at end of file