summaryrefslogtreecommitdiffstats
path: root/health
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--health/Makefile.am1
-rw-r--r--health/Makefile.in811
-rw-r--r--health/health.d/ioping.conf13
-rw-r--r--health/notifications/Makefile.in780
-rw-r--r--health/notifications/alarm-notify.sh2268
-rwxr-xr-xhealth/notifications/alarm-notify.sh.in1
-rw-r--r--health/notifications/custom/README.md30
-rwxr-xr-xhealth/notifications/health_alarm_notify.conf25
-rw-r--r--health/notifications/prowl/Makefile.inc12
-rw-r--r--health/notifications/prowl/README.md22
-rw-r--r--health/notifications/slack/README.md15
11 files changed, 103 insertions, 3875 deletions
diff --git a/health/Makefile.am b/health/Makefile.am
index 018011188..62a4c6d33 100644
--- a/health/Makefile.am
+++ b/health/Makefile.am
@@ -39,6 +39,7 @@ dist_healthconfig_DATA = \
health.d/elasticsearch.conf \
health.d/entropy.conf \
health.d/fping.conf \
+ health.d/ioping.conf \
health.d/fronius.conf \
health.d/haproxy.conf \
health.d/httpcheck.conf \
diff --git a/health/Makefile.in b/health/Makefile.in
deleted file mode 100644
index 9a0835f09..000000000
--- a/health/Makefile.in
+++ /dev/null
@@ -1,811 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = health
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(dist_healthconfig_DATA) $(dist_noinst_DATA) \
- $(dist_userhealthconfig_DATA)
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \
- $(top_srcdir)/build/m4/ax_c__generic.m4 \
- $(top_srcdir)/build/m4/ax_c_lto.m4 \
- $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \
- $(top_srcdir)/build/m4/ax_c_mallopt.m4 \
- $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \
- $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \
- $(top_srcdir)/build/m4/ax_pthread.m4 \
- $(top_srcdir)/build/m4/jemalloc.m4 \
- $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(healthconfigdir)" \
- "$(DESTDIR)$(userhealthconfigdir)"
-DATA = $(dist_healthconfig_DATA) $(dist_noinst_DATA) \
- $(dist_userhealthconfig_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CUPSCONFIG = @CUPSCONFIG@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@
-IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBCAP_CFLAGS = @LIBCAP_CFLAGS@
-LIBCAP_LIBS = @LIBCAP_LIBS@
-LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
-LIBMNL_LIBS = @LIBMNL_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MATH_CFLAGS = @MATH_CFLAGS@
-MATH_LIBS = @MATH_LIBS@
-MKDIR_P = @MKDIR_P@
-NFACCT_CFLAGS = @NFACCT_CFLAGS@
-NFACCT_LIBS = @NFACCT_LIBS@
-OBJEXT = @OBJEXT@
-OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@
-OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@
-OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@
-OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@
-OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@
-OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@
-OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@
-OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@
-OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@
-OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@
-OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@
-OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@
-OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@
-OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@
-OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@
-OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SSE_CANDIDATE = @SSE_CANDIDATE@
-STRIP = @STRIP@
-UUID_CFLAGS = @UUID_CFLAGS@
-UUID_LIBS = @UUID_LIBS@
-VERSION = @VERSION@
-XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@
-XENLIGHT_LIBS = @XENLIGHT_LIBS@
-YAJL_CFLAGS = @YAJL_CFLAGS@
-YAJL_LIBS = @YAJL_LIBS@
-ZLIB_CFLAGS = @ZLIB_CFLAGS@
-ZLIB_LIBS = @ZLIB_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-ax_pthread_config = @ax_pthread_config@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_target = @build_target@
-build_vendor = @build_vendor@
-builddir = @builddir@
-cachedir = @cachedir@
-chartsdir = @chartsdir@
-configdir = @configdir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-has_jemalloc = @has_jemalloc@
-has_tcmalloc = @has_tcmalloc@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libconfigdir = @libconfigdir@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-logdir = @logdir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-nodedir = @nodedir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pluginsdir = @pluginsdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pythondir = @pythondir@
-registrydir = @registrydir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-varlibdir = @varlibdir@
-webdir = @webdir@
-AUTOMAKE_OPTIONS = subdir-objects
-MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
-SUBDIRS = \
- notifications \
- $(NULL)
-
-CLEANFILES = \
- $(NULL)
-
-dist_noinst_DATA = \
- README.md \
- $(NULL)
-
-userhealthconfigdir = $(configdir)/health.d
-dist_userhealthconfig_DATA = \
- .keep \
- $(NULL)
-
-healthconfigdir = $(libconfigdir)/health.d
-dist_healthconfig_DATA = \
- health.d/adaptec_raid.conf \
- health.d/apache.conf \
- health.d/apcupsd.conf \
- health.d/backend.conf \
- health.d/bcache.conf \
- health.d/beanstalkd.conf \
- health.d/bind_rndc.conf \
- health.d/boinc.conf \
- health.d/btrfs.conf \
- health.d/ceph.conf \
- health.d/cgroups.conf \
- health.d/cpu.conf \
- health.d/couchdb.conf \
- health.d/disks.conf \
- health.d/dockerd.conf \
- health.d/elasticsearch.conf \
- health.d/entropy.conf \
- health.d/fping.conf \
- health.d/fronius.conf \
- health.d/haproxy.conf \
- health.d/httpcheck.conf \
- health.d/ipc.conf \
- health.d/ipfs.conf \
- health.d/ipmi.conf \
- health.d/isc_dhcpd.conf \
- health.d/kubelet.conf \
- health.d/lighttpd.conf \
- health.d/linux_power_supply.conf \
- health.d/load.conf \
- health.d/mdstat.conf \
- health.d/megacli.conf \
- health.d/memcached.conf \
- health.d/memory.conf \
- health.d/mongodb.conf \
- health.d/mysql.conf \
- health.d/named.conf \
- health.d/net.conf \
- health.d/netfilter.conf \
- health.d/nginx.conf \
- health.d/nginx_plus.conf \
- health.d/phpfpm.conf \
- health.d/portcheck.conf \
- health.d/postgres.conf \
- health.d/qos.conf \
- health.d/ram.conf \
- health.d/redis.conf \
- health.d/retroshare.conf \
- health.d/softnet.conf \
- health.d/squid.conf \
- health.d/stiebeleltron.conf \
- health.d/swap.conf \
- health.d/tcp_conn.conf \
- health.d/tcp_listen.conf \
- health.d/tcp_mem.conf \
- health.d/tcp_orphans.conf \
- health.d/tcp_resets.conf \
- health.d/udp_errors.conf \
- health.d/varnish.conf \
- health.d/web_log.conf \
- health.d/x509check.conf \
- health.d/zfs.conf \
- $(NULL)
-
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu health/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu health/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_healthconfigDATA: $(dist_healthconfig_DATA)
- @$(NORMAL_INSTALL)
- @list='$(dist_healthconfig_DATA)'; test -n "$(healthconfigdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(healthconfigdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(healthconfigdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(healthconfigdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(healthconfigdir)" || exit $$?; \
- done
-
-uninstall-dist_healthconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_healthconfig_DATA)'; test -n "$(healthconfigdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(healthconfigdir)'; $(am__uninstall_files_from_dir)
-install-dist_userhealthconfigDATA: $(dist_userhealthconfig_DATA)
- @$(NORMAL_INSTALL)
- @list='$(dist_userhealthconfig_DATA)'; test -n "$(userhealthconfigdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(userhealthconfigdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(userhealthconfigdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userhealthconfigdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(userhealthconfigdir)" || exit $$?; \
- done
-
-uninstall-dist_userhealthconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_userhealthconfig_DATA)'; test -n "$(userhealthconfigdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(userhealthconfigdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(healthconfigdir)" "$(DESTDIR)$(userhealthconfigdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-dist_healthconfigDATA \
- install-dist_userhealthconfigDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-dist_healthconfigDATA \
- uninstall-dist_userhealthconfigDATA
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
- check-am clean clean-generic cscopelist-am ctags ctags-am \
- distclean distclean-generic distclean-tags distdir dvi dvi-am \
- html html-am info info-am install install-am install-data \
- install-data-am install-dist_healthconfigDATA \
- install-dist_userhealthconfigDATA install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
- uninstall-am uninstall-dist_healthconfigDATA \
- uninstall-dist_userhealthconfigDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/health/health.d/ioping.conf b/health/health.d/ioping.conf
new file mode 100644
index 000000000..59a5c8edc
--- /dev/null
+++ b/health/health.d/ioping.conf
@@ -0,0 +1,13 @@
+template: disk_latency
+families: *
+ on: ioping.latency
+ lookup: average -10s unaligned of average
+ units: ms
+ every: 10s
+ green: 500
+ red: 1000
+ warn: $this > $green OR $max > $red
+ crit: $this > $red
+ info: average round trip delay during the last 10 seconds
+ delay: down 30m multiplier 1.5 max 2h
+ to: sysadmin
diff --git a/health/notifications/Makefile.in b/health/notifications/Makefile.in
deleted file mode 100644
index df381d9b5..000000000
--- a/health/notifications/Makefile.in
+++ /dev/null
@@ -1,780 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/build/subst.inc \
- $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc \
- $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc \
- $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc \
- $(srcdir)/kavenegar/Makefile.inc \
- $(srcdir)/messagebird/Makefile.inc \
- $(srcdir)/pagerduty/Makefile.inc \
- $(srcdir)/pushbullet/Makefile.inc \
- $(srcdir)/pushover/Makefile.inc \
- $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc \
- $(srcdir)/smstools3/Makefile.inc $(srcdir)/syslog/Makefile.inc \
- $(srcdir)/telegram/Makefile.inc $(srcdir)/twilio/Makefile.inc \
- $(srcdir)/web/Makefile.inc $(srcdir)/custom/Makefile.inc \
- $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(dist_plugins_SCRIPTS) $(dist_libconfig_DATA) \
- $(dist_noinst_DATA)
-subdir = health/notifications
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \
- $(top_srcdir)/build/m4/ax_c__generic.m4 \
- $(top_srcdir)/build/m4/ax_c_lto.m4 \
- $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \
- $(top_srcdir)/build/m4/ax_c_mallopt.m4 \
- $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \
- $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \
- $(top_srcdir)/build/m4/ax_pthread.m4 \
- $(top_srcdir)/build/m4/jemalloc.m4 \
- $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(pluginsdir)" \
- "$(DESTDIR)$(libconfigdir)"
-SCRIPTS = $(dist_plugins_SCRIPTS)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-DATA = $(dist_libconfig_DATA) $(dist_noinst_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CUPSCONFIG = @CUPSCONFIG@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@
-IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBCAP_CFLAGS = @LIBCAP_CFLAGS@
-LIBCAP_LIBS = @LIBCAP_LIBS@
-LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
-LIBMNL_LIBS = @LIBMNL_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MATH_CFLAGS = @MATH_CFLAGS@
-MATH_LIBS = @MATH_LIBS@
-MKDIR_P = @MKDIR_P@
-NFACCT_CFLAGS = @NFACCT_CFLAGS@
-NFACCT_LIBS = @NFACCT_LIBS@
-OBJEXT = @OBJEXT@
-OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@
-OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@
-OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@
-OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@
-OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@
-OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@
-OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@
-OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@
-OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@
-OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@
-OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@
-OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@
-OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@
-OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@
-OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@
-OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SSE_CANDIDATE = @SSE_CANDIDATE@
-STRIP = @STRIP@
-UUID_CFLAGS = @UUID_CFLAGS@
-UUID_LIBS = @UUID_LIBS@
-VERSION = @VERSION@
-XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@
-XENLIGHT_LIBS = @XENLIGHT_LIBS@
-YAJL_CFLAGS = @YAJL_CFLAGS@
-YAJL_LIBS = @YAJL_LIBS@
-ZLIB_CFLAGS = @ZLIB_CFLAGS@
-ZLIB_LIBS = @ZLIB_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-ax_pthread_config = @ax_pthread_config@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_target = @build_target@
-build_vendor = @build_vendor@
-builddir = @builddir@
-cachedir = @cachedir@
-chartsdir = @chartsdir@
-configdir = @configdir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-has_jemalloc = @has_jemalloc@
-has_tcmalloc = @has_tcmalloc@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libconfigdir = @libconfigdir@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-logdir = @logdir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-nodedir = @nodedir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pluginsdir = @pluginsdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pythondir = @pythondir@
-registrydir = @registrydir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-varlibdir = @varlibdir@
-webdir = @webdir@
-AUTOMAKE_OPTIONS = subdir-objects
-MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
-CLEANFILES = \
- alarm-notify.sh \
- $(NULL)
-
-SUFFIXES = .in
-dist_libconfig_DATA = \
- health_alarm_notify.conf \
- health_email_recipients.conf \
- $(NULL)
-
-dist_plugins_SCRIPTS = \
- alarm-notify.sh \
- alarm-email.sh \
- alarm-test.sh \
- $(NULL)
-
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-dist_noinst_DATA = alarm-notify.sh.in README.md $(NULL) \
- alerta/README.md alerta/Makefile.inc $(NULL) awssns/README.md \
- awssns/Makefile.inc $(NULL) discord/README.md \
- discord/Makefile.inc $(NULL) email/README.md \
- email/Makefile.inc $(NULL) flock/README.md flock/Makefile.inc \
- $(NULL) irc/README.md irc/Makefile.inc $(NULL) \
- kavenegar/README.md kavenegar/Makefile.inc $(NULL) \
- messagebird/README.md messagebird/Makefile.inc $(NULL) \
- pagerduty/README.md pagerduty/Makefile.inc $(NULL) \
- pushbullet/README.md pushbullet/Makefile.inc $(NULL) \
- pushover/README.md pushover/Makefile.inc $(NULL) \
- rocketchat/README.md rocketchat/Makefile.inc $(NULL) \
- slack/README.md slack/Makefile.inc $(NULL) smstools3/README.md \
- smstools3/Makefile.inc $(NULL) syslog/README.md \
- syslog/Makefile.inc $(NULL) telegram/README.md \
- telegram/Makefile.inc $(NULL) twilio/README.md \
- twilio/Makefile.inc $(NULL) web/README.md web/Makefile.inc \
- $(NULL) custom/README.md custom/Makefile.inc $(NULL)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .in
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc $(srcdir)/kavenegar/Makefile.inc $(srcdir)/messagebird/Makefile.inc $(srcdir)/pagerduty/Makefile.inc $(srcdir)/pushbullet/Makefile.inc $(srcdir)/pushover/Makefile.inc $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc $(srcdir)/smstools3/Makefile.inc $(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc $(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc $(srcdir)/custom/Makefile.inc $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu health/notifications/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu health/notifications/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-$(top_srcdir)/build/subst.inc $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc $(srcdir)/kavenegar/Makefile.inc $(srcdir)/messagebird/Makefile.inc $(srcdir)/pagerduty/Makefile.inc $(srcdir)/pushbullet/Makefile.inc $(srcdir)/pushover/Makefile.inc $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc $(srcdir)/smstools3/Makefile.inc $(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc $(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc $(srcdir)/custom/Makefile.inc:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-dist_pluginsSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir)
-install-dist_libconfigDATA: $(dist_libconfig_DATA)
- @$(NORMAL_INSTALL)
- @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \
- done
-
-uninstall-dist_libconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(libconfigdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_libconfigDATA \
- install-dist_pluginsSCRIPTS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_libconfigDATA \
- uninstall-dist_pluginsSCRIPTS
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
- ctags-am distclean distclean-generic distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dist_libconfigDATA \
- install-dist_pluginsSCRIPTS install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags-am uninstall uninstall-am \
- uninstall-dist_libconfigDATA uninstall-dist_pluginsSCRIPTS
-
-.in:
- if sed \
- -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \
- -e 's#[@]sbindir_POST@#$(sbindir)#g' \
- -e 's#[@]configdir_POST@#$(configdir)#g' \
- -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \
- -e 's#[@]cachedir_POST@#$(cachedir)#g' \
- -e 's#[@]registrydir_POST@#$(registrydir)#g' \
- -e 's#[@]varlibdir_POST@#$(varlibdir)#g' \
- $< > $@.tmp; then \
- mv "$@.tmp" "$@"; \
- else \
- rm -f "$@.tmp"; \
- false; \
- fi
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/health/notifications/alarm-notify.sh b/health/notifications/alarm-notify.sh
deleted file mode 100644
index 5a0e1f96e..000000000
--- a/health/notifications/alarm-notify.sh
+++ /dev/null
@@ -1,2268 +0,0 @@
-#!/usr/bin/env bash
-#shellcheck source=/dev/null disable=SC2086,SC2154
-
-# netdata
-# real-time performance and health monitoring, done right!
-# (C) 2017 Costa Tsaousis <costa@tsaousis.gr>
-# SPDX-License-Identifier: GPL-3.0-or-later
-#
-# Script to send alarm notifications for netdata
-#
-# Features:
-# - multiple notification methods
-# - multiple roles per alarm
-# - multiple recipients per role
-# - severity filtering per recipient
-#
-# Supported notification methods:
-# - emails by @ktsaou
-# - slack.com notifications by @ktsaou
-# - alerta.io notifications by @kattunga
-# - discordapp.com notifications by @lowfive
-# - pushover.net notifications by @ktsaou
-# - pushbullet.com push notifications by Tiago Peralta @tperalta82 #1070
-# - telegram.org notifications by @hashworks #1002
-# - twilio.com notifications by Levi Blaney @shadycuz #1211
-# - kafka notifications by @ktsaou #1342
-# - pagerduty.com notifications by Jim Cooley @jimcooley #1373
-# - messagebird.com notifications by @tech_no_logical #1453
-# - hipchat notifications by @ktsaou #1561
-# - fleep notifications by @Ferroin
-# - prowlapp.com notifications by @Ferroin
-# - custom notifications by @ktsaou
-# - syslog messages by @Ferroin
-# - Microsoft Team notification by @tioumen
-# - RocketChat notifications by @Hermsi1337 #3777
-
-# -----------------------------------------------------------------------------
-# testing notifications
-
-if { [ "${1}" = "test" ] || [ "${2}" = "test" ]; } && [ "${#}" -le 2 ]; then
- if [ "${2}" = "test" ]; then
- recipient="${1}"
- else
- recipient="${2}"
- fi
-
- [ -z "${recipient}" ] && recipient="sysadmin"
-
- id=1
- last="CLEAR"
- test_res=0
- for x in "WARNING" "CRITICAL" "CLEAR"; do
- echo >&2
- echo >&2 "# SENDING TEST ${x} ALARM TO ROLE: ${recipient}"
-
- "${0}" "${recipient}" "$(hostname)" 1 1 "${id}" "$(date +%s)" "test_alarm" "test.chart" "test.family" "${x}" "${last}" 100 90 "${0}" 1 $((0 + id)) "units" "this is a test alarm to verify notifications work" "new value" "old value" "evaluated expression" "expression variable values" 0 0
- #shellcheck disable=SC2181
- if [ $? -ne 0 ]; then
- echo >&2 "# FAILED"
- test_res=1
- else
- echo >&2 "# OK"
- fi
-
- last="${x}"
- id=$((id + 1))
- done
-
- exit $test_res
-fi
-
-export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/sbin"
-export LC_ALL=C
-
-# -----------------------------------------------------------------------------
-
-PROGRAM_NAME="$(basename "${0}")"
-
-logdate() {
- date "+%Y-%m-%d %H:%M:%S"
-}
-
-log() {
- local status="${1}"
- shift
-
- echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${*}"
-
-}
-
-warning() {
- log WARNING "${@}"
-}
-
-error() {
- log ERROR "${@}"
-}
-
-info() {
- log INFO "${@}"
-}
-
-fatal() {
- log FATAL "${@}"
- exit 1
-}
-
-debug=${NETDATA_ALARM_NOTIFY_DEBUG-0}
-debug() {
- [ "${debug}" = "1" ] && log DEBUG "${@}"
-}
-
-docurl() {
- if [ -z "${curl}" ]; then
- error "${curl} is unset."
- return 1
- fi
-
- if [ "${debug}" = "1" ]; then
- echo >&2 "--- BEGIN curl command ---"
- printf >&2 "%q " ${curl} "${@}"
- echo >&2
- echo >&2 "--- END curl command ---"
-
- local out code ret
- out=$(mktemp /tmp/netdata-health-alarm-notify-XXXXXXXX)
- code=$(${curl} ${curl_options} --write-out "%{http_code}" --output "${out}" --silent --show-error "${@}")
- ret=$?
- echo >&2 "--- BEGIN received response ---"
- cat >&2 "${out}"
- echo >&2
- echo >&2 "--- END received response ---"
- echo >&2 "RECEIVED HTTP RESPONSE CODE: ${code}"
- rm "${out}"
- echo "${code}"
- return ${ret}
- fi
-
- ${curl} ${curl_options} --write-out "%{http_code}" --output /dev/null --silent --show-error "${@}"
- return $?
-}
-
-# -----------------------------------------------------------------------------
-# List of all the notification mechanisms we support.
-# Used in a couple of places to write more compact code.
-
-method_names="
-email
-pushover
-pushbullet
-telegram
-slack
-alerta
-flock
-discord
-hipchat
-twilio
-messagebird
-pd
-fleep
-syslog
-custom
-msteam
-kavenegar
-prowl
-awssns
-rocketchat
-sms
-"
-
-# -----------------------------------------------------------------------------
-# this is to be overwritten by the config file
-
-custom_sender() {
- info "not sending custom notification for ${status} of '${host}.${chart}.${name}'"
-}
-
-# -----------------------------------------------------------------------------
-
-# check for BASH v4+ (required for associative arrays)
-if [ ${BASH_VERSINFO[0]} -lt 4 ]; then
- fatal "BASH version 4 or later is required (this is ${BASH_VERSION})."
-fi
-
-# -----------------------------------------------------------------------------
-# defaults to allow running this script by hand
-
-[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="/etc/netdata"
-[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="/usr/lib/netdata/conf.d"
-[ -z "${NETDATA_CACHE_DIR}" ] && NETDATA_CACHE_DIR="/var/cache/netdata"
-[ -z "${NETDATA_REGISTRY_URL}" ] && NETDATA_REGISTRY_URL="https://registry.my-netdata.io"
-
-# -----------------------------------------------------------------------------
-# parse command line parameters
-
-if [ ${1} = "unittest" ]; then
- unittest=1 # enable unit testing mode
- roles="${2}" # the role that should be used for unit testing
- cfgfile="${3}" # the location of the config file to use for unit testing
- status="${4}" # the current status : REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
- old_status="${5}" # the previous status: REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
-else
- roles="${1}" # the roles that should be notified for this event
- args_host="${2}" # the host generated this event
- unique_id="${3}" # the unique id of this event
- alarm_id="${4}" # the unique id of the alarm that generated this event
- event_id="${5}" # the incremental id of the event, for this alarm id
- when="${6}" # the timestamp this event occurred
- name="${7}" # the name of the alarm, as given in netdata health.d entries
- chart="${8}" # the name of the chart (type.id)
- family="${9}" # the family of the chart
- status="${10}" # the current status : REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
- old_status="${11}" # the previous status: REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
- value="${12}" # the current value of the alarm
- old_value="${13}" # the previous value of the alarm
- src="${14}" # the line number and file the alarm has been configured
- duration="${15}" # the duration in seconds of the previous alarm state
- non_clear_duration="${16}" # the total duration in seconds this is/was non-clear
- units="${17}" # the units of the value
- info="${18}" # a short description of the alarm
- value_string="${19}" # friendly value (with units)
- # shellcheck disable=SC2034
- # variable is unused, but https://github.com/netdata/netdata/pull/5164#discussion_r255572947
- old_value_string="${20}" # friendly old value (with units), previously named "old_value_string"
- calc_expression="${21}" # contains the expression that was evaluated to trigger the alarm
- calc_param_values="${22}" # the values of the parameters in the expression, at the time of the evaluation
- total_warnings="${23}" # Total number of alarms in WARNING state
- total_critical="${24}" # Total number of alarms in CRITICAL state
-fi
-
-# -----------------------------------------------------------------------------
-# find a suitable hostname to use, if netdata did not supply a hostname
-
-if [ -z ${args_host} ]; then
- this_host=$(hostname -s 2>/dev/null)
- host="${this_host}"
- args_host="${this_host}"
-else
- host="${args_host}"
-fi
-
-# -----------------------------------------------------------------------------
-# screen statuses we don't need to send a notification
-
-# don't do anything if this is not WARNING, CRITICAL or CLEAR
-if [ "${status}" != "WARNING" ] && [ "${status}" != "CRITICAL" ] && [ "${status}" != "CLEAR" ]; then
- info "not sending notification for ${status} of '${host}.${chart}.${name}'"
- exit 1
-fi
-
-# don't do anything if this is CLEAR, but it was not WARNING or CRITICAL
-if [ "${clear_alarm_always}" != "YES" ] && [ "${old_status}" != "WARNING" ] && [ "${old_status}" != "CRITICAL" ] && [ "${status}" = "CLEAR" ]; then
- info "not sending notification for ${status} of '${host}.${chart}.${name}' (last status was ${old_status})"
- exit 1
-fi
-
-# -----------------------------------------------------------------------------
-# load configuration
-
-# By default fetch images from the global public registry.
-# This is required by default, since all notification methods need to download
-# images via the Internet, and private registries might not be reachable.
-# This can be overwritten at the configuration file.
-images_base_url="https://registry.my-netdata.io"
-
-# curl options to use
-curl_options=""
-
-# hostname handling
-use_fqdn="NO"
-
-# needed commands
-# if empty they will be searched in the system path
-curl=
-sendmail=
-
-# enable / disable features
-for method_name in ${method_names^^}; do
- declare SEND_${method_name}="YES"
- declare DEFAULT_RECIPIENT_${method_name}
-done
-
-for method_name in ${method_names}; do
- declare -A role_recipients_${method_name}
-done
-
-# slack configs
-SLACK_WEBHOOK_URL=
-
-# Microsoft Team configs
-MSTEAM_WEBHOOK_URL=
-
-# rocketchat configs
-ROCKETCHAT_WEBHOOK_URL=
-
-# alerta configs
-ALERTA_WEBHOOK_URL=
-ALERTA_API_KEY=
-
-# flock configs
-FLOCK_WEBHOOK_URL=
-
-# discord configs
-DISCORD_WEBHOOK_URL=
-
-# pushover configs
-PUSHOVER_APP_TOKEN=
-
-# pushbullet configs
-PUSHBULLET_ACCESS_TOKEN=
-PUSHBULLET_SOURCE_DEVICE=
-
-# twilio configs
-TWILIO_ACCOUNT_SID=
-TWILIO_ACCOUNT_TOKEN=
-TWILIO_NUMBER=
-
-# hipchat configs
-HIPCHAT_SERVER=
-HIPCHAT_AUTH_TOKEN=
-
-# messagebird configs
-MESSAGEBIRD_ACCESS_KEY=
-MESSAGEBIRD_NUMBER=
-
-# kavenegar configs
-KAVENEGAR_API_KEY=
-KAVENEGAR_SENDER=
-
-# telegram configs
-TELEGRAM_BOT_TOKEN=
-
-# kafka configs
-SEND_KAFKA="YES"
-KAFKA_URL=
-KAFKA_SENDER_IP=
-
-# pagerduty.com configs
-PD_SERVICE_KEY=
-
-# fleep.io configs
-FLEEP_SENDER="${host}"
-
-# Amazon SNS configs
-AWSSNS_MESSAGE_FORMAT=
-
-# syslog configs
-SYSLOG_FACILITY=
-
-# email configs
-EMAIL_SENDER=
-EMAIL_CHARSET=$(locale charmap 2>/dev/null)
-EMAIL_THREADING=
-
-# irc configs
-IRC_NICKNAME=
-IRC_REALNAME=
-IRC_NETWORK=
-
-# load the stock and user configuration files
-# these will overwrite the variables above
-
-if [ ${unittest} ]; then
- if source "${cfgfile}"; then
- error "Failed to load requested config file."
- exit 1
- fi
-else
- for CONFIG in "${NETDATA_STOCK_CONFIG_DIR}/health_alarm_notify.conf" "${NETDATA_USER_CONFIG_DIR}/health_alarm_notify.conf"; do
- if [ -f "${CONFIG}" ]; then
- debug "Loading config file '${CONFIG}'..."
- source "${CONFIG}" || error "Failed to load config file '${CONFIG}'."
- else
- warning "Cannot find file '${CONFIG}'."
- fi
- done
-fi
-
-# If we didn't autodetect the character set for e-mail and it wasn't
-# set by the user, we need to set it to a reasonable default. UTF-8
-# should be correct for almost all modern UNIX systems.
-if [ -z ${EMAIL_CHARSET} ]; then
- EMAIL_CHARSET="UTF-8"
-fi
-
-# If we've been asked to use FQDN's for the URL's in the alarm, do so,
-# unless we're sending an alarm for a slave system which we can't get the
-# FQDN of easily.
-if [ "${use_fqdn}" = "YES" ] && [ "${host}" = "$(hostname -s 2>/dev/null)" ]; then
- host="$(hostname -f 2>/dev/null)"
-fi
-
-# -----------------------------------------------------------------------------
-# filter a recipient based on alarm event severity
-
-filter_recipient_by_criticality() {
- local method="${1}" x="${2}" r s
- shift
-
- r="${x/|*/}" # the recipient
- s="${x/*|/}" # the severity required for notifying this recipient
-
- # no severity filtering for this person
- [ "${r}" = "${s}" ] && return 0
-
- # the severity is invalid
- s="${s^^}"
- if [ "${s}" != "CRITICAL" ]; then
- error "SEVERITY FILTERING for ${x} VIA ${method}: invalid severity '${s,,}', only 'critical' is supported."
- return 0
- fi
-
- # create the status tracking directory for this user
- [ ! -d "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}" ] &&
- mkdir -p "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}"
-
- case "${status}" in
- CRITICAL)
- # make sure he will get future notifications for this alarm too
- touch "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}"
- debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: the alarm is CRITICAL (will now receive next status change)"
- return 0
- ;;
-
- WARNING)
- if [ -f "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" ]; then
- # we do not remove the file, so that he will get future notifications of this alarm
- debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: recipient has been notified for this alarm in the past (will still receive next status change)"
- return 0
- fi
- ;;
-
- *)
- if [ -f "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" ]; then
- # remove the file, so that he will only receive notifications for CRITICAL states for this alarm
- rm "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}"
- debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: recipient has been notified for this alarm (will only receive CRITICAL notifications from now on)"
- return 0
- fi
- ;;
- esac
-
- debug "SEVERITY FILTERING for ${x} VIA ${method}: BLOCK: recipient should not receive this notification"
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# verify the delivery methods supported
-
-# check slack
-[ -z "${SLACK_WEBHOOK_URL}" ] && SEND_SLACK="NO"
-
-# check rocketchat
-[ -z "${ROCKETCHAT_WEBHOOK_URL}" ] && SEND_ROCKETCHAT="NO"
-
-# check alerta
-[ -z "${ALERTA_WEBHOOK_URL}" ] && SEND_ALERTA="NO"
-
-# check flock
-[ -z "${FLOCK_WEBHOOK_URL}" ] && SEND_FLOCK="NO"
-
-# check discord
-[ -z "${DISCORD_WEBHOOK_URL}" ] && SEND_DISCORD="NO"
-
-# check pushover
-[ -z "${PUSHOVER_APP_TOKEN}" ] && SEND_PUSHOVER="NO"
-
-# check pushbullet
-[ -z "${PUSHBULLET_ACCESS_TOKEN}" ] && SEND_PUSHBULLET="NO"
-
-# check twilio
-{ [ -z "${TWILIO_ACCOUNT_TOKEN}" ] || [ -z "${TWILIO_ACCOUNT_SID}" ] || [ -z "${TWILIO_NUMBER}" ]; } && SEND_TWILIO="NO"
-
-# check hipchat
-[ -z "${HIPCHAT_AUTH_TOKEN}" ] && SEND_HIPCHAT="NO"
-
-# check messagebird
-{ [ -z "${MESSAGEBIRD_ACCESS_KEY}" ] || [ -z "${MESSAGEBIRD_NUMBER}" ]; } && SEND_MESSAGEBIRD="NO"
-
-# check kavenegar
-{ [ -z "${KAVENEGAR_API_KEY}" ] || [ -z "${KAVENEGAR_SENDER}" ]; } && SEND_KAVENEGAR="NO"
-
-# check telegram
-[ -z "${TELEGRAM_BOT_TOKEN}" ] && SEND_TELEGRAM="NO"
-
-# check kafka
-{ [ -z "${KAFKA_URL}" ] || [ -z "${KAFKA_SENDER_IP}" ]; } && SEND_KAFKA="NO"
-
-# check irc
-[ -z "${IRC_NETWORK}" ] && SEND_IRC="NO"
-
-# check fleep
-#shellcheck disable=SC2153
-{ [ -z "${FLEEP_SERVER}" ] || [ -z "${FLEEP_SENDER}" ]; } && SEND_FLEEP="NO"
-
-if [ "${SEND_PUSHOVER}" = "YES" ] ||
- [ "${SEND_SLACK}" = "YES" ] ||
- [ "${SEND_ROCKETCHAT}" = "YES" ] ||
- [ "${SEND_ALERTA}" = "YES" ] ||
- [ "${SEND_PD}" = "YES" ] ||
- [ "${SEND_FLOCK}" = "YES" ] ||
- [ "${SEND_DISCORD}" = "YES" ] ||
- [ "${SEND_HIPCHAT}" = "YES" ] ||
- [ "${SEND_TWILIO}" = "YES" ] ||
- [ "${SEND_MESSAGEBIRD}" = "YES" ] ||
- [ "${SEND_KAVENEGAR}" = "YES" ] ||
- [ "${SEND_TELEGRAM}" = "YES" ] ||
- [ "${SEND_PUSHBULLET}" = "YES" ] ||
- [ "${SEND_KAFKA}" = "YES" ] ||
- [ "${SEND_FLEEP}" = "YES" ] ||
- [ "${SEND_PROWL}" = "YES" ] ||
- [ "${SEND_CUSTOM}" = "YES" ] ||
- [ "${SEND_MSTEAM}" = "YES" ]; then
- # if we need curl, check for the curl command
- if [ -z "${curl}" ]; then
- curl="$(command -v curl 2>/dev/null)"
- fi
- if [ -z "${curl}" ]; then
- error "Cannot find curl command in the system path. Disabling all curl based notifications."
- SEND_PUSHOVER="NO"
- SEND_PUSHBULLET="NO"
- SEND_TELEGRAM="NO"
- SEND_SLACK="NO"
- SEND_MSTEAM="NO"
- SEND_ROCKETCHAT="NO"
- SEND_ALERTA="NO"
- SEND_PD="NO"
- SEND_FLOCK="NO"
- SEND_DISCORD="NO"
- SEND_TWILIO="NO"
- SEND_HIPCHAT="NO"
- SEND_MESSAGEBIRD="NO"
- SEND_KAVENEGAR="NO"
- SEND_KAFKA="NO"
- SEND_FLEEP="NO"
- SEND_PROWL="NO"
- SEND_CUSTOM="NO"
- fi
-fi
-
-if [ "${SEND_SMS}" = "YES" ]; then
- if [ -z "${sendsms}" ]; then
- sendsms="$(command -v sendsms 2>/dev/null)"
- fi
- if [ -z "${sendsms}" ]; then
- SEND_SMS="NO"
- fi
-fi
-# if we need sendmail, check for the sendmail command
-if [ "${SEND_EMAIL}" = "YES" ] && [ -z "${sendmail}" ]; then
- sendmail="$(command -v sendmail 2>/dev/null)"
- if [ -z "${sendmail}" ]; then
- debug "Cannot find sendmail command in the system path. Disabling email notifications."
- SEND_EMAIL="NO"
- fi
-fi
-
-# if we need logger, check for the logger command
-if [ "${SEND_SYSLOG}" = "YES" ] && [ -z "${logger}" ]; then
- logger="$(command -v logger 2>/dev/null)"
- if [ -z "${logger}" ]; then
- debug "Cannot find logger command in the system path. Disabling syslog notifications."
- SEND_SYSLOG="NO"
- fi
-fi
-
-# if we need aws, check for the aws command
-if [ "${SEND_AWSSNS}" = "YES" ] && [ -z "${aws}" ]; then
- aws="$(command -v aws 2>/dev/null)"
- if [ -z "${aws}" ]; then
- debug "Cannot find aws command in the system path. Disabling Amazon SNS notifications."
- SEND_AWSSNS="NO"
- fi
-fi
-
-# -----------------------------------------------------------------------------
-# find the recipients' addresses per method
-
-# netdata may call us with multiple roles, and roles may have multiple but
-# overlapping recipients - so, here we find the unique recipients.
-for method_name in ${method_names}; do
- send_var="SEND_${method_name^^}"
- if [ "${!send_var}" = "NO" ]; then
- continue
- fi
-
- declare -A arr_var=()
-
- for x in ${roles//,/ }; do
- # the roles 'silent' and 'disabled' mean:
- # don't send a notification for this role
- if [ "${x}" = "silent" ] || [ "${x}" = "disabled" ]; then
- continue
- fi
-
- role_recipients="role_recipients_${method_name}[$x]"
- default_recipient_var="DEFAULT_RECIPIENT_${method_name^^}"
-
- a="${!role_recipients}"
- [ -z "${a}" ] && a="${!default_recipient_var}"
- for r in ${a//,/ }; do
- [ "${r}" != "disabled" ] && filter_recipient_by_criticality ${method_name} "${r}" && arr_var[${r/|*/}]="1"
- done
- done
-
- # build the list of recipients
- to_var="to_${method_name}"
- declare to_${method_name}="${!arr_var[*]}"
-
- [ -z "${!to_var}" ] && declare ${send_var}="NO"
-done
-
-# -----------------------------------------------------------------------------
-# handle fixup of the email recipient list.
-
-fix_to_email() {
- to_email=
- while [ -n "${1}" ]; do
- [ -n "${to_email}" ] && to_email="${to_email}, "
- to_email="${to_email}${1}"
- shift 1
- done
-}
-
-# ${to_email} without quotes here
-fix_to_email ${to_email}
-
-# -----------------------------------------------------------------------------
-# handle output if we're running in unit test mode
-if [ ${unittest} ]; then
- for method_name in ${method_names}; do
- to_var="to_${method_name}"
- echo "results: ${method_name}: ${!to_var}"
- done
- exit 0
-fi
-
-# -----------------------------------------------------------------------------
-# check that we have at least a method enabled
-proceed=0
-for method in "${SEND_EMAIL}" \
- "${SEND_PUSHOVER}" \
- "${SEND_TELEGRAM}" \
- "${SEND_SLACK}" \
- "${SEND_ROCKETCHAT}" \
- "${SEND_ALERTA}" \
- "${SEND_FLOCK}" \
- "${SEND_DISCORD}" \
- "${SEND_TWILIO}" \
- "${SEND_HIPCHAT}" \
- "${SEND_MESSAGEBIRD}" \
- "${SEND_KAVENEGAR}" \
- "${SEND_PUSHBULLET}" \
- "${SEND_KAFKA}" \
- "${SEND_PD}" \
- "${SEND_FLEEP}" \
- "${SEND_CUSTOM}" \
- "${SEND_IRC}" \
- "${SEND_AWSSNS}" \
- "${SEND_SYSLOG}" \
- "${SEND_SMS}" \
- "${SEND_MSTEAM}"; do
- if [ "${method}" == "YES" ]; then
- proceed=1
- break
- fi
-done
-if [ "$proceed" -eq 0 ]; then
- fatal "All notification methods are disabled. Not sending notification for host '${host}', chart '${chart}' to '${roles}' for '${name}' = '${value}' for status '${status}'."
-fi
-
-# -----------------------------------------------------------------------------
-# get the date the alarm happened
-
-date=$(date --date=@${when} "${date_format}" 2>/dev/null)
-[ -z "${date}" ] && date=$(date "${date_format}" 2>/dev/null)
-[ -z "${date}" ] && date=$(date --date=@${when} 2>/dev/null)
-[ -z "${date}" ] && date=$(date 2>/dev/null)
-
-# ----------------------------------------------------------------------------
-# prepare some extra headers if we've been asked to thread e-mails
-if [ "${SEND_EMAIL}" == "YES" ] && [ "${EMAIL_THREADING}" != "NO" ]; then
- email_thread_headers="In-Reply-To: <${chart}-${name}@${host}>\\nReferences: <${chart}-${name}@${host}>"
-else
- email_thread_headers=
-fi
-
-# -----------------------------------------------------------------------------
-# function to URL encode a string
-
-urlencode() {
- local string="${1}" strlen encoded pos c o
-
- strlen=${#string}
- for ((pos = 0; pos < strlen; pos++)); do
- c=${string:pos:1}
- case "${c}" in
- [-_.~a-zA-Z0-9])
- o="${c}"
- ;;
-
- *)
- printf -v o '%%%02x' "'${c}"
- ;;
- esac
- encoded+="${o}"
- done
-
- REPLY="${encoded}"
- echo "${REPLY}"
-}
-
-# -----------------------------------------------------------------------------
-# function to convert a duration in seconds, to a human readable duration
-# using DAYS, MINUTES, SECONDS
-
-duration4human() {
- local s="${1}" d=0 h=0 m=0 ds="day" hs="hour" ms="minute" ss="second" ret
- d=$((s / 86400))
- s=$((s - (d * 86400)))
- h=$((s / 3600))
- s=$((s - (h * 3600)))
- m=$((s / 60))
- s=$((s - (m * 60)))
-
- if [ ${d} -gt 0 ]; then
- [ ${m} -ge 30 ] && h=$((h + 1))
- [ ${d} -gt 1 ] && ds="days"
- [ ${h} -gt 1 ] && hs="hours"
- if [ ${h} -gt 0 ]; then
- ret="${d} ${ds} and ${h} ${hs}"
- else
- ret="${d} ${ds}"
- fi
- elif [ ${h} -gt 0 ]; then
- [ ${s} -ge 30 ] && m=$((m + 1))
- [ ${h} -gt 1 ] && hs="hours"
- [ ${m} -gt 1 ] && ms="minutes"
- if [ ${m} -gt 0 ]; then
- ret="${h} ${hs} and ${m} ${ms}"
- else
- ret="${h} ${hs}"
- fi
- elif [ ${m} -gt 0 ]; then
- [ ${m} -gt 1 ] && ms="minutes"
- [ ${s} -gt 1 ] && ss="seconds"
- if [ ${s} -gt 0 ]; then
- ret="${m} ${ms} and ${s} ${ss}"
- else
- ret="${m} ${ms}"
- fi
- else
- [ ${s} -gt 1 ] && ss="seconds"
- ret="${s} ${ss}"
- fi
-
- REPLY="${ret}"
- echo "${REPLY}"
-}
-
-# -----------------------------------------------------------------------------
-# email sender
-
-send_email() {
- local ret opts=() sender_email="${EMAIL_SENDER}" sender_name=
- if [ "${SEND_EMAIL}" = "YES" ]; then
-
- if [ -n "${EMAIL_SENDER}" ]; then
- if [[ ${EMAIL_SENDER} =~ ^\".*\"\ \<.*\>$ ]]; then
- # the name includes double quotes
- sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)"
- sender_name="$(echo "${EMAIL_SENDER}" | cut -d '"' -f 2)"
- elif [[ ${EMAIL_SENDER} =~ ^\'.*\'\ \<.*\>$ ]]; then
- # the name includes single quotes
- sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)"
- sender_name="$(echo "${EMAIL_SENDER}" | cut -d "'" -f 2)"
- elif [[ ${EMAIL_SENDER} =~ ^.*\ \<.*\>$ ]]; then
- # the name does not have any quotes
- sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)"
- sender_name="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 1)"
- fi
- fi
-
- [ -n "${sender_email}" ] && opts+=(-f "${sender_email}")
- [ -n "${sender_name}" ] && opts+=(-F "${sender_name}")
-
- if [ "${debug}" = "1" ]; then
- echo >&2 "--- BEGIN sendmail command ---"
- printf >&2 "%q " "${sendmail}" -t "${opts[@]}"
- echo >&2
- echo >&2 "--- END sendmail command ---"
- fi
-
- "${sendmail}" -t "${opts[@]}"
- ret=$?
-
- if [ ${ret} -eq 0 ]; then
- info "sent email notification for: ${host} ${chart}.${name} is ${status} to '${to_email}'"
- return 0
- else
- error "failed to send email notification for: ${host} ${chart}.${name} is ${status} to '${to_email}' with error code ${ret}."
- return 1
- fi
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# pushover sender
-
-send_pushover() {
- local apptoken="${1}" usertokens="${2}" when="${3}" url="${4}" status="${5}" title="${6}" message="${7}" httpcode sent=0 user priority
-
- if [ "${SEND_PUSHOVER}" = "YES" ] && [ -n "${apptoken}" ] && [ -n "${usertokens}" ] && [ -n "${title}" ] && [ -n "${message}" ]; then
-
- # https://pushover.net/api
- priority=-2
- case "${status}" in
- CLEAR) priority=-1 ;; # low priority: no sound or vibration
- WARNING) priority=0 ;; # normal priority: respect quiet hours
- CRITICAL) priority=1 ;; # high priority: bypass quiet hours
- *) priority=-2 ;; # lowest priority: no notification at all
- esac
-
- for user in ${usertokens}; do
- httpcode=$(docurl \
- --form-string "token=${apptoken}" \
- --form-string "user=${user}" \
- --form-string "html=1" \
- --form-string "title=${title}" \
- --form-string "message=${message}" \
- --form-string "timestamp=${when}" \
- --form-string "url=${url}" \
- --form-string "url_title=Open netdata dashboard to view the alarm" \
- --form-string "priority=${priority}" \
- https://api.pushover.net/1/messages.json)
-
- if [ "${httpcode}" = "200" ]; then
- info "sent pushover notification for: ${host} ${chart}.${name} is ${status} to '${user}'"
- sent=$((sent + 1))
- else
- error "failed to send pushover notification for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# pushbullet sender
-
-send_pushbullet() {
- local userapikey="${1}" source_device="${2}" recipients="${3}" url="${4}" title="${5}" message="${6}" httpcode sent=0 user
- if [ "${SEND_PUSHBULLET}" = "YES" ] && [ -n "${userapikey}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
- #https://docs.pushbullet.com/#create-push
- for user in ${recipients}; do
- httpcode=$(docurl \
- --header 'Access-Token: '${userapikey}'' \
- --header 'Content-Type: application/json' \
- --data-binary @<(
- cat <<EOF
- {"title": "${title}",
- "type": "link",
- "email": "${user}",
- "body": "$(echo -n ${message})",
- "url": "${url}",
- "source_device_iden": "${source_device}"}
-EOF
- ) "https://api.pushbullet.com/v2/pushes" -X POST)
-
- if [ "${httpcode}" = "200" ]; then
- info "sent pushbullet notification for: ${host} ${chart}.${name} is ${status} to '${user}'"
- sent=$((sent + 1))
- else
- error "failed to send pushbullet notification for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# kafka sender
-
-send_kafka() {
- local httpcode sent=0
- if [ "${SEND_KAFKA}" = "YES" ]; then
- httpcode=$(docurl -X POST \
- --data "{host_ip:\"${KAFKA_SENDER_IP}\",when:${when},name:\"${name}\",chart:\"${chart}\",family:\"${family}\",status:\"${status}\",old_status:\"${old_status}\",value:${value},old_value:${old_value},duration:${duration},non_clear_duration:${non_clear_duration},units:\"${units}\",info:\"${info}\"}" \
- "${KAFKA_URL}")
-
- if [ "${httpcode}" = "204" ]; then
- info "sent kafka data for: ${host} ${chart}.${name} is ${status} and ip '${KAFKA_SENDER_IP}'"
- sent=$((sent + 1))
- else
- error "failed to send kafka data for: ${host} ${chart}.${name} is ${status} and ip '${KAFKA_SENDER_IP}' with HTTP error code ${httpcode}."
- fi
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# pagerduty.com sender
-
-send_pd() {
- local recipients="${1}" sent=0
- unset t
- case ${status} in
- CLEAR) t='resolve' ;;
- WARNING) t='trigger' ;;
- CRITICAL) t='trigger' ;;
- esac
-
- if [ ${SEND_PD} = "YES" ] && [ -n "${t}" ]; then
- for PD_SERVICE_KEY in ${recipients}; do
- d="${status} ${name} = ${value_string} - ${host}, ${family}"
- payload="$(
- cat <<EOF
- {
- "service_key": "${PD_SERVICE_KEY}",
- "event_type": "${t}",
- "incident_key" : "${alarm_id}",
- "description": "${d}",
- "details": {
- "value_w_units": "${value_string}",
- "when": "${when}",
- "duration" : "${duration}",
- "roles": "${roles}",
- "alarm_id" : "${alarm_id}",
- "name" : "${name}",
- "chart" : "${chart}",
- "family" : "${family}",
- "status" : "${status}",
- "old_status" : "${old_status}",
- "value" : "${value}",
- "old_value" : "${old_value}",
- "src" : "${src}",
- "non_clear_duration" : "${non_clear_duration}",
- "units" : "${units}",
- "info" : "${info}"
- }
- }
-EOF
- )"
- httpcode=$(docurl -X POST --data "${payload}" "https://events.pagerduty.com/generic/2010-04-15/create_event.json")
- if [ "${httpcode}" = "200" ]; then
- info "sent pagerduty notification for: ${host} ${chart}.${name} is ${status}'"
- sent=$((sent + 1))
- else
- error "failed to send pagerduty notification for: ${host} ${chart}.${name} is ${status}, with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# twilio sender
-
-send_twilio() {
- local accountsid="${1}" accounttoken="${2}" twilionumber="${3}" recipients="${4}" title="${5}" message="${6}" httpcode sent=0 user
- if [ "${SEND_TWILIO}" = "YES" ] && [ -n "${accountsid}" ] && [ -n "${accounttoken}" ] && [ -n "${twilionumber}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
- #https://www.twilio.com/packages/labs/code/bash/twilio-sms
- for user in ${recipients}; do
- httpcode=$(docurl -X POST \
- --data-urlencode "From=${twilionumber}" \
- --data-urlencode "To=${user}" \
- --data-urlencode "Body=${title} ${message}" \
- -u "${accountsid}:${accounttoken}" \
- "https://api.twilio.com/2010-04-01/Accounts/${accountsid}/Messages.json")
-
- if [ "${httpcode}" = "201" ]; then
- info "sent Twilio SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
- sent=$((sent + 1))
- else
- error "failed to send Twilio SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# hipchat sender
-
-send_hipchat() {
- local authtoken="${1}" recipients="${2}" message="${3}" httpcode sent=0 room color msg_format notify
-
- # remove <small></small> from the message
- message="${message//<small>/}"
- message="${message//<\/small>/}"
-
- if [ "${SEND_HIPCHAT}" = "YES" ] && [ -n "${HIPCHAT_SERVER}" ] && [ -n "${authtoken}" ] && [ -n "${recipients}" ] && [ -n "${message}" ]; then
- # Valid values: html, text.
- # Defaults to 'html'.
- msg_format="html"
-
- # Background color for message. Valid values: yellow, green, red, purple, gray, random. Defaults to 'yellow'.
- case "${status}" in
- WARNING) color="yellow" ;;
- CRITICAL) color="red" ;;
- CLEAR) color="green" ;;
- *) color="gray" ;;
- esac
-
- # Whether this message should trigger a user notification (change the tab color, play a sound, notify mobile phones, etc).
- # Each recipient's notification preferences are taken into account.
- # Defaults to false.
- notify="true"
-
- for room in ${recipients}; do
- httpcode=$(docurl -X POST \
- -H "Content-type: application/json" \
- -H "Authorization: Bearer ${authtoken}" \
- -d "{\"color\": \"${color}\", \"from\": \"${host}\", \"message_format\": \"${msg_format}\", \"message\": \"${message}\", \"notify\": \"${notify}\"}" \
- "https://${HIPCHAT_SERVER}/v2/room/${room}/notification")
-
- if [ "${httpcode}" = "204" ]; then
- info "sent HipChat notification for: ${host} ${chart}.${name} is ${status} to '${room}'"
- sent=$((sent + 1))
- else
- error "failed to send HipChat notification for: ${host} ${chart}.${name} is ${status} to '${room}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# messagebird sender
-
-send_messagebird() {
- local accesskey="${1}" messagebirdnumber="${2}" recipients="${3}" title="${4}" message="${5}" httpcode sent=0 user
- if [ "${SEND_MESSAGEBIRD}" = "YES" ] && [ -n "${accesskey}" ] && [ -n "${messagebirdnumber}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
- #https://developers.messagebird.com/docs/messaging
- for user in ${recipients}; do
- httpcode=$(docurl -X POST \
- --data-urlencode "originator=${messagebirdnumber}" \
- --data-urlencode "recipients=${user}" \
- --data-urlencode "body=${title} ${message}" \
- --data-urlencode "datacoding=auto" \
- -H "Authorization: AccessKey ${accesskey}" \
- "https://rest.messagebird.com/messages")
-
- if [ "${httpcode}" = "201" ]; then
- info "sent Messagebird SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
- sent=$((sent + 1))
- else
- error "failed to send Messagebird SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# kavenegar sender
-
-send_kavenegar() {
- local API_KEY="${1}" kavenegarsender="${2}" recipients="${3}" title="${4}" message="${5}" httpcode sent=0 user
- if [ "${SEND_KAVENEGAR}" = "YES" ] && [ -n "${API_KEY}" ] && [ -n "${kavenegarsender}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
- # http://api.kavenegar.com/v1/{API-KEY}/sms/send.json
- for user in ${recipients}; do
- httpcode=$(docurl -X POST http://api.kavenegar.com/v1/${API_KEY}/sms/send.json \
- --data-urlencode "sender=${kavenegarsender}" \
- --data-urlencode "receptor=${user}" \
- --data-urlencode "message=${title} ${message}")
-
- if [ "${httpcode}" = "200" ]; then
- info "sent Kavenegar SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
- sent=$((sent + 1))
- else
- error "failed to send Kavenegar SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# telegram sender
-
-send_telegram() {
- local bottoken="${1}" chatids="${2}" message="${3}" httpcode sent=0 chatid emoji disableNotification=""
-
- if [ "${status}" = "CLEAR" ]; then disableNotification="--data-urlencode disable_notification=true"; fi
-
- case "${status}" in
- WARNING) emoji="⚠️" ;;
- CRITICAL) emoji="🔴" ;;
- CLEAR) emoji="✅" ;;
- *) emoji="⚪️" ;;
- esac
-
- if [ "${SEND_TELEGRAM}" = "YES" ] && [ -n "${bottoken}" ] && [ -n "${chatids}" ] && [ -n "${message}" ]; then
- for chatid in ${chatids}; do
- # https://core.telegram.org/bots/api#sendmessage
- httpcode=$(docurl ${disableNotification} \
- --data-urlencode "parse_mode=HTML" \
- --data-urlencode "disable_web_page_preview=true" \
- --data-urlencode "text=${emoji} ${message}" \
- "https://api.telegram.org/bot${bottoken}/sendMessage?chat_id=${chatid}")
-
- if [ "${httpcode}" = "200" ]; then
- info "sent telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}'"
- sent=$((sent + 1))
- elif [ "${httpcode}" = "401" ]; then
- error "failed to send telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}': Wrong bot token."
- else
- error "failed to send telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# Microsoft Team sender
-
-send_msteam() {
-
- local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
- [ "${SEND_MSTEAM}" != "YES" ] && return 1
-
- case "${status}" in
- WARNING) icon="${MSTEAM_ICON_WARNING}" && color="${MSTEAM_COLOR_WARNING}" ;;
- CRITICAL) icon="${MSTEAM_ICON_CRITICAL}" && color="${MSTEAM_COLOR_CRITICAL}" ;;
- CLEAR) icon="${MSTEAM_ICON_CLEAR}" && color="${MSTEAM_COLOR_CLEAR}" ;;
- *) icon="${MSTEAM_ICON_DEFAULT}" && color="${MSTEAM_COLOR_DEFAULT}" ;;
- esac
-
- for channel in ${channels}; do
- ## More details are available here regarding the payload syntax options : https://docs.microsoft.com/en-us/outlook/actionable-messages/message-card-reference
- ## Online designer : https://acdesignerbeta.azurewebsites.net/
- payload="$(
- cat <<EOF
- {
- "@context": "http://schema.org/extensions",
- "@type": "MessageCard",
- "themeColor": "${color}",
- "title": "$icon Alert ${status} from netdata for ${host}",
- "text": "${host} ${status_message}, ${chart} (_${family}_), *${alarm}*",
- "potentialAction": [
- {
- "@type": "OpenUri",
- "name": "Netdata",
- "targets": [
- { "os": "default", "uri": "${goto_url}" }
- ]
- }
- ]
- }
-EOF
- )"
-
- # Replacing in the webhook CHANNEL string by the MS Teams channel name from conf file.
- webhook="${webhook//CHANNEL/${channel}}"
-
- httpcode=$(docurl -H "Content-Type: application/json" -d "${payload}" "${webhook}")
-
- if [ "${httpcode}" = "200" ]; then
- info "sent Microsoft team notification for: ${host} ${chart}.${name} is ${status} to '${webhook}'"
- sent=$((sent + 1))
- else
- error "failed to send Microsoft team notification for: ${host} ${chart}.${name} is ${status} to '${webhook}', with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# slack sender
-
-send_slack() {
- local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
- [ "${SEND_SLACK}" != "YES" ] && return 1
-
- case "${status}" in
- WARNING) color="warning" ;;
- CRITICAL) color="danger" ;;
- CLEAR) color="good" ;;
- *) color="#777777" ;;
- esac
-
- for channel in ${channels}; do
- # Default entry in the recipient is without a hash in front (backwards-compatible). Accept specification of channel or user.
- if [ "${channel::1}" != "#" ] && [ "${channel::1}" != "@" ]; then channel="#$channel"; fi
-
- # If channel is equal to "#" then do not send the channel attribute at all. Slack also defines channels and users in webhooks.
- if [ "${channel}" = "#" ]; then
- ch=""
- chstr="without specifying a channel"
- else
- ch="\"channel\": \"${channel}\","
- chstr="to '${channel}'"
- fi
-
- payload="$(
- cat <<EOF
- {
- $ch
- "username": "netdata on ${host}",
- "icon_url": "${images_base_url}/images/banner-icon-144x144.png",
- "text": "${host} ${status_message}, \`${chart}\` (_${family}_), *${alarm}*",
- "attachments": [
- {
- "fallback": "${alarm} - ${chart} (${family}) - ${info}",
- "color": "${color}",
- "title": "${alarm}",
- "title_link": "${goto_url}",
- "text": "${info}",
- "fields": [
- {
- "title": "${chart}",
- "short": true
- },
- {
- "title": "${family}",
- "short": true
- }
- ],
- "thumb_url": "${image}",
- "footer": "by ${host}",
- "ts": ${when}
- }
- ]
- }
-EOF
- )"
-
- httpcode=$(docurl -X POST --data-urlencode "payload=${payload}" "${webhook}")
- if [ "${httpcode}" = "200" ]; then
- info "sent slack notification for: ${host} ${chart}.${name} is ${status} ${chstr}"
- sent=$((sent + 1))
- else
- error "failed to send slack notification for: ${host} ${chart}.${name} is ${status} ${chstr}, with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# rocketchat sender
-
-send_rocketchat() {
- local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
- [ "${SEND_ROCKETCHAT}" != "YES" ] && return 1
-
- case "${status}" in
- WARNING) color="warning" ;;
- CRITICAL) color="danger" ;;
- CLEAR) color="good" ;;
- *) color="#777777" ;;
- esac
-
- for channel in ${channels}; do
- payload="$(
- cat <<EOF
- {
- "channel": "#${channel}",
- "alias": "netdata on ${host}",
- "avatar": "${images_base_url}/images/banner-icon-144x144.png",
- "text": "${host} ${status_message}, \`${chart}\` (_${family}_), *${alarm}*",
- "attachments": [
- {
- "color": "${color}",
- "title": "${alarm}",
- "title_link": "${goto_url}",
- "text": "${info}",
- "fields": [
- {
- "title": "${chart}",
- "short": true,
- "value": "chart"
- },
- {
- "title": "${family}",
- "short": true,
- "value": "family"
- }
- ],
- "thumb_url": "${image}",
- "ts": "${when}"
- }
- ]
- }
-EOF
- )"
-
- httpcode=$(docurl -X POST --data-urlencode "payload=${payload}" "${webhook}")
- if [ "${httpcode}" = "200" ]; then
- info "sent rocketchat notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
- sent=$((sent + 1))
- else
- error "failed to send rocketchat notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# alerta sender
-
-send_alerta() {
- local webhook="${1}" channels="${2}" httpcode sent=0 channel severity resource event payload auth
-
- [ "${SEND_ALERTA}" != "YES" ] && return 1
-
- case "${status}" in
- CRITICAL) severity="critical" ;;
- WARNING) severity="warning" ;;
- CLEAR) severity="cleared" ;;
- *) severity="indeterminate" ;;
- esac
-
- if [[ ${chart} == httpcheck* ]]; then
- resource=$chart
- event=$name
- else
- resource="${host}:${family}"
- event="${chart}.${name}"
- fi
-
- for channel in ${channels}; do
- payload="$(
- cat <<EOF
- {
- "resource": "${resource}",
- "event": "${event}",
- "environment": "${channel}",
- "severity": "${severity}",
- "service": ["Netdata"],
- "group": "Performance",
- "value": "${value_string}",
- "text": "${info}",
- "tags": ["alarm_id:${alarm_id}"],
- "attributes": {
- "roles": "${roles}",
- "name": "${name}",
- "chart": "${chart}",
- "family": "${family}",
- "source": "${src}",
- "moreInfo": "<a href=\"${goto_url}\">View Netdata</a>"
- },
- "origin": "netdata/${host}",
- "type": "netdataAlarm",
- "rawData": "${BASH_ARGV[@]}"
- }
-EOF
- )"
-
- if [ -n "${ALERTA_API_KEY}" ]; then
- auth="Key ${ALERTA_API_KEY}"
- fi
-
- httpcode=$(docurl -X POST "${webhook}/alert" -H "Content-Type: application/json" -H "Authorization: $auth" --data "${payload}")
-
- if [ "${httpcode}" = "200" ] || [ "${httpcode}" = "201" ]; then
- info "sent alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
- sent=$((sent + 1))
- elif [ "${httpcode}" = "202" ]; then
- info "suppressed alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
- else
- error "failed to send alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# flock sender
-
-send_flock() {
- local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
- [ "${SEND_FLOCK}" != "YES" ] && return 1
-
- case "${status}" in
- WARNING) color="warning" ;;
- CRITICAL) color="danger" ;;
- CLEAR) color="good" ;;
- *) color="#777777" ;;
- esac
-
- for channel in ${channels}; do
- httpcode=$(docurl -X POST "${webhook}" -H "Content-Type: application/json" -d "{
- \"sendAs\": {
- \"name\" : \"netdata on ${host}\",
- \"profileImage\" : \"${images_base_url}/images/banner-icon-144x144.png\"
- },
- \"text\": \"${host} *${status_message}*\",
- \"timestamp\": \"${when}\",
- \"attachments\": [
- {
- \"description\": \"${chart} (${family}) - ${info}\",
- \"color\": \"${color}\",
- \"title\": \"${alarm}\",
- \"url\": \"${goto_url}\",
- \"text\": \"${info}\",
- \"views\": {
- \"image\": {
- \"original\": { \"src\": \"${image}\", \"width\": 400, \"height\": 400 },
- \"thumbnail\": { \"src\": \"${image}\", \"width\": 50, \"height\": 50 },
- \"filename\": \"${image}\"
- }
- }
- }
- ]
- }")
- if [ "${httpcode}" = "200" ]; then
- info "sent flock notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
- sent=$((sent + 1))
- else
- error "failed to send flock notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# discord sender
-
-send_discord() {
- local webhook="${1}/slack" channels="${2}" httpcode sent=0 channel color payload username
-
- [ "${SEND_DISCORD}" != "YES" ] && return 1
-
- case "${status}" in
- WARNING) color="warning" ;;
- CRITICAL) color="danger" ;;
- CLEAR) color="good" ;;
- *) color="#777777" ;;
- esac
-
- for channel in ${channels}; do
- username="netdata on ${host}"
- [ ${#username} -gt 32 ] && username="${username:0:29}..."
-
- payload="$(
- cat <<EOF
- {
- "channel": "#${channel}",
- "username": "${username}",
- "text": "${host} ${status_message}, \`${chart}\` (_${family}_), *${alarm}*",
- "icon_url": "${images_base_url}/images/banner-icon-144x144.png",
- "attachments": [
- {
- "color": "${color}",
- "title": "${alarm}",
- "title_link": "${goto_url}",
- "text": "${info}",
- "fields": [
- {
- "title": "${chart}",
- "value": "${family}"
- }
- ],
- "thumb_url": "${image}",
- "footer_icon": "${images_base_url}/images/banner-icon-144x144.png",
- "footer": "${host}",
- "ts": ${when}
- }
- ]
- }
-EOF
- )"
-
- httpcode=$(docurl -X POST --data-urlencode "payload=${payload}" "${webhook}")
- if [ "${httpcode}" = "200" ]; then
- info "sent discord notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
- sent=$((sent + 1))
- else
- error "failed to send discord notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# fleep sender
-
-send_fleep() {
- local httpcode sent=0 webhooks="${1}" data message
- if [ "${SEND_FLEEP}" = "YES" ]; then
- message="${host} ${status_message}, \`${chart}\` (${family}), *${alarm}*\\n${info}"
-
- for hook in ${webhooks}; do
- data="{ "
- data="${data} 'message': '${message}', "
- data="${data} 'user': '${FLEEP_SENDER}' "
- data="${data} }"
-
- httpcode=$(docurl -X POST --data "${data}" "https://fleep.io/hook/${hook}")
-
- if [ "${httpcode}" = "200" ]; then
- info "sent fleep data for: ${host} ${chart}.${name} is ${status} and user '${FLEEP_SENDER}'"
- sent=$((sent + 1))
- else
- error "failed to send fleep data for: ${host} ${chart}.${name} is ${status} and user '${FLEEP_SENDER}' with HTTP error code ${httpcode}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# Prowl sender
-
-send_prowl() {
- local httpcode sent=0 data message keys prio=0 alarm_url event
- if [ "${SEND_PROWL}" = "YES" ]; then
- message="$(urlencode "${host} ${status_message}, \`${chart}\` (${family}), *${alarm}*\\n${info}")"
- message="description=${message}"
- keys="$(urlencode "$(echo "${1}" | tr ' ' ,)")"
- keys="apikey=${keys}"
- app="application=Netdata"
-
- case "${status}" in
- CRITICAL)
- prio=2
- ;;
- WARNING)
- prio=1
- ;;
- esac
- prio="priority=${prio}"
-
- alarm_url="$(urlencode ${goto_url})"
- alarm_url="url=${alarm_url}"
- event="$(urlencode "${host} ${status_message}")"
- event="event=${event}"
-
- data="${keys}&${prio}&${alarm_url}&${app}&${event}&${message}"
-
- httpcode=$(docurl -X POST --data "${data}" "https://api.prowlapp.com/publicapi/add")
-
- if [ "${httpcode}" = "200" ]; then
- info "sent prowl data for: ${host} ${chart}.${name} is ${status}"
- sent=1
- else
- error "failed to send prowl data for: ${host} ${chart}.${name} is ${status} with with error code ${httpcode}."
- fi
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# irc sender
-
-send_irc() {
- local NICKNAME="${1}" REALNAME="${2}" CHANNELS="${3}" NETWORK="${4}" SERVERNAME="${5}" MESSAGE="${6}" sent=0 channel color send_alarm reply_codes error
-
- if [ "${SEND_IRC}" = "YES" ] && [ -n "${NICKNAME}" ] && [ -n "${REALNAME}" ] && [ -n "${CHANNELS}" ] && [ -n "${NETWORK}" ] && [ -n "${SERVERNAME}" ]; then
- case "${status}" in
- WARNING) color="warning" ;;
- CRITICAL) color="danger" ;;
- CLEAR) color="good" ;;
- *) color="#777777" ;;
- esac
-
- for CHANNEL in ${CHANNELS}; do
- error=0
- send_alarm=$(echo -e "USER ${NICKNAME} guest ${REALNAME} ${SERVERNAME}\\nNICK ${NICKNAME}\\nJOIN ${CHANNEL}\\nPRIVMSG ${CHANNEL} :${MESSAGE}\\nQUIT\\n" \ | nc "${NETWORK}" 6667)
- reply_codes=$(echo "${send_alarm}" | cut -d ' ' -f 2 | grep -o '[0-9]*')
- for code in ${reply_codes}; do
- if [ "${code}" -ge 400 ] && [ "${code}" -le 599 ]; then
- error=1
- break
- fi
- done
-
- if [ "${error}" -eq 0 ]; then
- info "sent irc notification for: ${host} ${chart}.${name} is ${status} to '${CHANNEL}'"
- sent=$((sent + 1))
- else
- error "failed to send irc notification for: ${host} ${chart}.${name} is ${status} to '${CHANNEL}', with error code ${code}."
- fi
- done
- fi
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# Amazon SNS sender
-
-send_awssns() {
- local targets="${1}" message='' sent=0 region=''
- local default_format="${status} on ${host} at ${date}: ${chart} ${value_string}"
-
- [ "${SEND_AWSSNS}" = "YES" ] || return 1
-
- message=${AWSSNS_MESSAGE_FORMAT:-${default_format}}
-
- for target in ${targets}; do
- # Extract the region from the target ARN. We need to explicitly specify the region so that it matches up correctly.
- region="$(echo ${target} | cut -f 4 -d ':')"
- if ${aws} sns publish --region "${region}" --subject "${host} ${status_message} - ${name//_/ } - ${chart}" --message "${message}" --target-arn ${target} &>/dev/null; then
- info "sent Amazon SNS notification for: ${host} ${chart}.${name} is ${status} to '${target}'"
- sent=$((sent + 1))
- else
- error "failed to send Amazon SNS notification for: ${host} ${chart}.${name} is ${status} to '${target}'"
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# syslog sender
-
-send_syslog() {
- local facility=${SYSLOG_FACILITY:-"local6"} level='info' targets="${1}"
- local priority='' message='' host='' port='' prefix=''
- local temp1='' temp2=''
-
- [ "${SEND_SYSLOG}" = "YES" ] || return 1
-
- if [ "${status}" = "CRITICAL" ]; then
- level='crit'
- elif [ "${status}" = "WARNING" ]; then
- level='warning'
- fi
-
- for target in ${targets}; do
- priority="${facility}.${level}"
- message=''
- host=''
- port=''
- prefix=''
- temp1=''
- temp2=''
-
- prefix=$(echo ${target} | cut -d '/' -f 2)
- temp1=$(echo ${target} | cut -d '/' -f 1)
-
- if [ ${prefix} != ${temp1} ]; then
- if (echo ${temp1} | grep -q '@'); then
- temp2=$(echo ${temp1} | cut -d '@' -f 1)
- host=$(echo ${temp1} | cut -d '@' -f 2)
-
- if [ ${temp2} != ${host} ]; then
- priority=${temp2}
- fi
-
- port=$(echo ${host} | rev | cut -d ':' -f 1 | rev)
-
- if (echo ${host} | grep -E -q '\[.*\]'); then
- if (echo ${port} | grep -q ']'); then
- port=''
- else
- host=$(echo ${host} | rev | cut -d ':' -f 2- | rev)
- fi
- else
- if [ ${port} = ${host} ]; then
- port=''
- else
- host=$(echo ${host} | cut -d ':' -f 1)
- fi
- fi
- else
- priority=${temp1}
- fi
- fi
-
- message="${prefix} ${status} on ${host} at ${date}: ${chart} ${value_string}"
-
- if [ ${host} ]; then
- logger_options="${logger_options} -n ${host}"
- if [ ${port} ]; then
- logger_options="${logger_options} -P ${port}"
- fi
- fi
-
- ${logger} -p ${priority} ${logger_options} "${message}"
- done
-
- return $?
-}
-
-# -----------------------------------------------------------------------------
-# SMS sender
-
-send_sms() {
- local recipients="${1}" errcode errmessage sent=0
-
- # Human readable SMS
- local msg="${host} ${status_message}: ${chart} (${family}), ${alarm}"
-
- # limit it to 160 characters
- msg="${msg:0:160}"
-
- if [ "${SEND_SMS}" = "YES" ] && [ -n "${sendsms}" ] && [ -n "${recipients}" ] && [ -n "${msg}" ]; then
- # http://api.kavenegar.com/v1/{API-KEY}/sms/send.json
- for phone in ${recipients}; do
- errmessage=$($sendsms $phone "$msg" 2>&1)
- errcode=$?
- if [ ${errcode} -eq 0 ]; then
- info "sent smstools3 SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
- sent=$((sent + 1))
- else
- error "failed to send smstools3 SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with error code ${errcode}: ${errmessage}."
- fi
- done
-
- [ ${sent} -gt 0 ] && return 0
- fi
-
- return 1
-}
-
-# -----------------------------------------------------------------------------
-# prepare the content of the notification
-
-# the url to send the user on click
-urlencode "${args_host}" >/dev/null
-url_host="${REPLY}"
-urlencode "${chart}" >/dev/null
-url_chart="${REPLY}"
-urlencode "${family}" >/dev/null
-url_family="${REPLY}"
-urlencode "${name}" >/dev/null
-url_name="${REPLY}"
-
-redirect_params="host=${url_host}&chart=${url_chart}&family=${url_family}&alarm=${url_name}&alarm_unique_id=${unique_id}&alarm_id=${alarm_id}&alarm_event_id=${event_id}"
-GOTOCLOUD=0
-
-if [ "${NETDATA_REGISTRY_URL}" == "https://registry.my-netdata.io" ]; then
- if [ -z "${NETDATA_REGISTRY_UNIQUE_ID}" ]; then
- if [ -f "/var/lib/netdata/registry/netdata.public.unique.id" ]; then
- NETDATA_REGISTRY_UNIQUE_ID="$(cat "/var/lib/netdata/registry/netdata.public.unique.id")"
- fi
- fi
- if [ ! -z "${NETDATA_REGISTRY_UNIQUE_ID}" ]; then
- GOTOCLOUD=1
- fi
-fi
-
-if [ ${GOTOCLOUD} -eq 0 ]; then
- goto_url="${NETDATA_REGISTRY_URL}/goto-host-from-alarm.html?${redirect_params}"
-else
- goto_url="https://netdata.cloud/alarms/redirect?agentID=${NETDATA_REGISTRY_UNIQUE_ID}&${redirect_params}"
-fi
-
-# the severity of the alarm
-severity="${status}"
-
-# the time the alarm was raised
-duration4human ${duration} >/dev/null
-duration_txt="${REPLY}"
-duration4human ${non_clear_duration} >/dev/null
-non_clear_duration_txt="${REPLY}"
-raised_for="(was ${old_status,,} for ${duration_txt})"
-
-# the key status message
-status_message="status unknown"
-
-# the color of the alarm
-color="grey"
-
-# the alarm value
-alarm="${name//_/ } = ${value_string}"
-
-# the image of the alarm
-image="${images_base_url}/images/banner-icon-144x144.png"
-
-# prepare the title based on status
-case "${status}" in
-CRITICAL)
- image="${images_base_url}/images/alert-128-red.png"
- status_message="is critical"
- color="#ca414b"
- ;;
-
-WARNING)
- image="${images_base_url}/images/alert-128-orange.png"
- status_message="needs attention"
- color="#ffc107"
- ;;
-
-CLEAR)
- image="${images_base_url}/images/check-mark-2-128-green.png"
- status_message="recovered"
- color="#77ca6d"
- ;;
-esac
-
-if [ "${status}" = "CLEAR" ]; then
- severity="Recovered from ${old_status}"
- if [ ${non_clear_duration} -gt ${duration} ]; then
- raised_for="(alarm was raised for ${non_clear_duration_txt})"
- fi
-
- # don't show the value when the status is CLEAR
- # for certain alarms, this value might not have any meaning
- alarm="${name//_/ } ${raised_for}"
-
-elif { [ "${old_status}" = "WARNING" ] && [ "${status}" = "CRITICAL" ]; }; then
- severity="Escalated to ${status}"
- if [ ${non_clear_duration} -gt ${duration} ]; then
- raised_for="(alarm is raised for ${non_clear_duration_txt})"
- fi
-
-elif { [ "${old_status}" = "CRITICAL" ] && [ "${status}" = "WARNING" ]; }; then
- severity="Demoted to ${status}"
- if [ ${non_clear_duration} -gt ${duration} ]; then
- raised_for="(alarm is raised for ${non_clear_duration_txt})"
- fi
-
-else
- raised_for=
-fi
-
-# prepare HTML versions of elements
-info_html=
-[ -n "${info}" ] && info_html=" <small><br/>${info}</small>"
-
-raised_for_html=
-[ -n "${raised_for}" ] && raised_for_html="<br/><small>${raised_for}</small>"
-
-# -----------------------------------------------------------------------------
-# send the slack notification
-
-# slack aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_slack "${SLACK_WEBHOOK_URL}" "${to_slack}"
-SENT_SLACK=$?
-
-# -----------------------------------------------------------------------------
-# send the Microsoft notification
-
-# Microsoft team aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_msteam "${MSTEAM_WEBHOOK_URL}" "${to_msteam}"
-SENT_MSTEAM=$?
-
-# -----------------------------------------------------------------------------
-# send the rocketchat notification
-
-# rocketchat aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_rocketchat "${ROCKETCHAT_WEBHOOK_URL}" "${to_rocketchat}"
-SENT_ROCKETCHAT=$?
-
-# -----------------------------------------------------------------------------
-# send the alerta notification
-
-# alerta aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_alerta "${ALERTA_WEBHOOK_URL}" "${to_alerta}"
-SENT_ALERTA=$?
-
-# -----------------------------------------------------------------------------
-# send the flock notification
-
-# flock aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_flock "${FLOCK_WEBHOOK_URL}" "${to_flock}"
-SENT_FLOCK=$?
-
-# -----------------------------------------------------------------------------
-# send the discord notification
-
-# discord aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_discord "${DISCORD_WEBHOOK_URL}" "${to_discord}"
-SENT_DISCORD=$?
-
-# -----------------------------------------------------------------------------
-# send the pushover notification
-
-send_pushover "${PUSHOVER_APP_TOKEN}" "${to_pushover}" "${when}" "${goto_url}" "${status}" "${host} ${status_message} - ${name//_/ } - ${chart}" "
-<font color=\"${color}\"><b>${alarm}</b></font>${info_html}<br/>&nbsp;
-<small><b>${chart}</b><br/>Chart<br/>&nbsp;</small>
-<small><b>${family}</b><br/>Family<br/>&nbsp;</small>
-<small><b>${severity}</b><br/>Severity<br/>&nbsp;</small>
-<small><b>${date}${raised_for_html}</b><br/>Time<br/>&nbsp;</small>
-<a href=\"${goto_url}\">View Netdata</a><br/>&nbsp;
-<small><small>The source of this alarm is line ${src}</small></small>
-"
-
-SENT_PUSHOVER=$?
-
-# -----------------------------------------------------------------------------
-# send the pushbullet notification
-
-send_pushbullet "${PUSHBULLET_ACCESS_TOKEN}" "${PUSHBULLET_SOURCE_DEVICE}" "${to_pushbullet}" "${goto_url}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}\\n
-Severity: ${severity}\\n
-Chart: ${chart}\\n
-Family: ${family}\\n
-$(date -d @${when})\\n
-The source of this alarm is line ${src}"
-
-SENT_PUSHBULLET=$?
-
-# -----------------------------------------------------------------------------
-# send the twilio SMS
-
-send_twilio "${TWILIO_ACCOUNT_SID}" "${TWILIO_ACCOUNT_TOKEN}" "${TWILIO_NUMBER}" "${to_twilio}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_TWILIO=$?
-
-# -----------------------------------------------------------------------------
-# send the messagebird SMS
-
-send_messagebird "${MESSAGEBIRD_ACCESS_KEY}" "${MESSAGEBIRD_NUMBER}" "${to_messagebird}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_MESSAGEBIRD=$?
-
-# -----------------------------------------------------------------------------
-# send the kavenegar SMS
-
-send_kavenegar "${KAVENEGAR_API_KEY}" "${KAVENEGAR_SENDER}" "${to_kavenegar}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_KAVENEGAR=$?
-
-# -----------------------------------------------------------------------------
-# send the telegram.org message
-
-# https://core.telegram.org/bots/api#formatting-options
-send_telegram "${TELEGRAM_BOT_TOKEN}" "${to_telegram}" "${host} ${status_message} - <b>${name//_/ }</b>
-${chart} (${family})
-<a href=\"${goto_url}\">${alarm}</a>
-<i>${info}</i>"
-
-SENT_TELEGRAM=$?
-
-# -----------------------------------------------------------------------------
-# send the kafka message
-
-send_kafka
-SENT_KAFKA=$?
-
-# -----------------------------------------------------------------------------
-# send the pagerduty.com message
-
-send_pd "${to_pd}"
-SENT_PD=$?
-
-# -----------------------------------------------------------------------------
-# send the fleep message
-
-send_fleep "${to_fleep}"
-SENT_FLEEP=$?
-
-# -----------------------------------------------------------------------------
-# send the Prowl message
-
-send_prowl "${to_prowl}"
-SENT_PROWL=$?
-
-# -----------------------------------------------------------------------------
-# send the irc message
-
-send_irc "${IRC_NICKNAME}" "${IRC_REALNAME}" "${to_irc}" "${IRC_NETWORK}" "${host}" "${host} ${status_message} - ${name//_/ } - ${chart} ----- ${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_IRC=$?
-
-# -----------------------------------------------------------------------------
-# send the SMS message with smstools3
-
-send_sms "${to_sms}"
-
-SENT_SMS=$?
-
-# -----------------------------------------------------------------------------
-# send the custom message
-
-send_custom() {
- # is it enabled?
- [ "${SEND_CUSTOM}" != "YES" ] && return 1
-
- # do we have any sender?
- [ -z "${1}" ] && return 1
-
- # call the custom_sender function
- custom_sender "${@}"
-}
-
-send_custom "${to_custom}"
-SENT_CUSTOM=$?
-
-# -----------------------------------------------------------------------------
-# send hipchat message
-
-send_hipchat "${HIPCHAT_AUTH_TOKEN}" "${to_hipchat}" " \
-${host} ${status_message}<br/> \
-<b>${alarm}</b> ${info_html}<br/> \
-<b>${chart}</b> (family <b>${family}</b>)<br/> \
-<b>${date}${raised_for_html}</b><br/> \
-<a href=\\\"${goto_url}\\\">View netdata dashboard</a> \
-(source of alarm ${src}) \
-"
-
-SENT_HIPCHAT=$?
-
-# -----------------------------------------------------------------------------
-# send the Amazon SNS message
-
-send_awssns "${to_awssns}"
-
-SENT_AWSSNS=$?
-
-# -----------------------------------------------------------------------------
-# send the syslog message
-
-send_syslog "${to_syslog}"
-
-SENT_SYSLOG=$?
-
-# -----------------------------------------------------------------------------
-# send the email
-
-send_email <<EOF
-To: ${to_email}
-Subject: ${host} ${status_message} - ${name//_/ } - ${chart}
-MIME-Version: 1.0
-Content-Type: multipart/alternative; boundary="multipart-boundary"
-${email_thread_headers}
-
-This is a MIME-encoded multipart message
-
---multipart-boundary
-Content-Type: text/plain; encoding=${EMAIL_CHARSET}
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-
-${host} ${status_message}
-
-${alarm} ${info}
-${raised_for}
-
-Chart : ${chart}
-Family : ${family}
-Severity: ${severity}
-URL : ${goto_url}
-Source : ${src}
-Date : ${date}
-Notification generated on ${host}
-
-Evaluated Expression : ${calc_expression}
-Expression Variables : ${calc_param_values}
-
-The host has ${total_warnings} WARNING and ${total_critical} CRITICAL alarm(s) raised.
-
---multipart-boundary
-Content-Type: text/html; encoding=${EMAIL_CHARSET}
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; box-sizing: border-box; font-size: 14px; margin: 0; padding: 0;">
-<body style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px; width: 100% !important; min-height: 100%; line-height: 1.6; background: #f6f6f6; margin:0; padding: 0;">
-<table>
- <tbody>
- <tr>
- <td style="vertical-align: top;" valign="top"></td>
- <td width="700" style="vertical-align: top; display: block !important; max-width: 700px !important; clear: both !important; margin: 0 auto; padding: 0;" valign="top">
- <div style="max-width: 700px; display: block; margin: 0 auto; padding: 20px;">
- <table width="100%" cellpadding="0" cellspacing="0" style="background: #fff; border: 1px solid #e9e9e9;">
- <tbody>
- <tr>
- <td bgcolor="#eee" style="padding: 5px 20px 5px 20px; background-color: #eee;">
- <div style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 20px; color: #777; font-weight: bold;">netdata notification</div>
- </td>
- </tr>
- <tr>
- <td bgcolor="${color}" style="font-size: 16px; vertical-align: top; font-weight: 400; text-align: center; margin: 0; padding: 10px; color: #ffffff; background: ${color} !important; border: 1px solid ${color}; border-top-color: ${color};" align="center" valign="top">
- <h1 style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-weight: 400; margin: 0;">${host} ${status_message}</h1>
- </td>
- </tr>
- <tr>
- <td style="vertical-align: top;" valign="top">
- <div style="margin: 0; padding: 20px; max-width: 700px;">
- <table width="100%" cellpadding="0" cellspacing="0" style="max-width:700px">
- <tbody>
- <tr>
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding:0 0 20px;" align="left" valign="top">
- <span>${chart}</span>
- <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Chart</span>
- </td>
- </tr>
- <tr style="margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
- <span><b>${alarm}</b>${info_html}</span>
- <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Alarm</span>
- </td>
- </tr>
- <tr>
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
- <span>${family}</span>
- <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Family</span>
- </td>
- </tr>
- <tr style="margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
- <span>${severity}</span>
- <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Severity</span>
- </td>
- </tr>
- <tr style="margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top"><span>${date}</span>
- <span>${raised_for_html}</span> <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Time</span>
- </td>
- </tr>
- <tr style="margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
- <span>${calc_expression}</span>
- <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Evaluated Expression</span>
- </td>
- </tr>
- <tr style="margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
- <span>${calc_param_values}</span>
- <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Expression Variables</span>
- </td>
- </tr>
- <tr style="margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
- The host has ${total_warnings} WARNING and ${total_critical} CRITICAL alarm(s) raised.
- </td>
- </tr>
-
- <tr style="margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;">
- <a href="${goto_url}" style="font-size: 14px; color: #ffffff; text-decoration: none; line-height: 1.5; font-weight: bold; text-align: center; display: inline-block; text-transform: capitalize; background: #35568d; border-width: 1px; border-style: solid; border-color: #2b4c86; margin: 0; padding: 10px 15px;" target="_blank">View Netdata</a>
- </td>
- </tr>
- <tr style="text-align: center; margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 11px; vertical-align: top; margin: 0; padding: 10px 0 0 0; color: #666666;" align="center" valign="bottom">The source of this alarm is line <code>${src}</code><br/>(alarms are configurable, edit this file to adapt the alarm to your needs)
- </td>
- </tr>
- <tr style="text-align: center; margin: 0; padding: 0;">
- <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 12px; vertical-align: top; margin:0; padding: 20px 0 0 0; color: #666666; border-top: 1px solid #f0f0f0;" align="center" valign="bottom">Sent by
- <a href="https://mynetdata.io/" target="_blank">netdata</a>, the real-time performance and health monitoring, on <code>${host}</code>.
- </td>
- </tr>
- </tbody>
- </table>
- </div>
- </td>
- </tr>
- </tbody>
- </table>
- </div>
- </td>
- </tr>
- </tbody>
-</table>
-</body>
-</html>
---multipart-boundary--
-EOF
-
-SENT_EMAIL=$?
-
-# -----------------------------------------------------------------------------
-# let netdata know
-for state in "${SENT_EMAIL}" \
- "${SENT_PUSHOVER}" \
- "${SENT_TELEGRAM}" \
- "${SENT_SLACK}" \
- "${SENT_ROCKETCHAT}" \
- "${SENT_ALERTA}" \
- "${SENT_FLOCK}" \
- "${SENT_DISCORD}" \
- "${SENT_TWILIO}" \
- "${SENT_HIPCHAT}" \
- "${SENT_MESSAGEBIRD}" \
- "${SENT_KAVENEGAR}" \
- "${SENT_PUSHBULLET}" \
- "${SENT_KAFKA}" \
- "${SENT_PD}" \
- "${SENT_FLEEP}" \
- "${SENT_PROWL}" \
- "${SENT_CUSTOM}" \
- "${SENT_IRC}" \
- "${SENT_AWSSNS}" \
- "${SENT_SYSLOG}" \
- "${SENT_SMS}" \
- "${SENT_MSTEAM}"; do
- if [ "${state}" -eq 0 ]; then
- # we sent something
- exit 0
- fi
-done
-# we did not send anything
-exit 1
diff --git a/health/notifications/alarm-notify.sh.in b/health/notifications/alarm-notify.sh.in
index 16e5f08ad..ff4b3f3dc 100755
--- a/health/notifications/alarm-notify.sh.in
+++ b/health/notifications/alarm-notify.sh.in
@@ -654,6 +654,7 @@ for method in "${SEND_EMAIL}" \
"${SEND_KAFKA}" \
"${SEND_PD}" \
"${SEND_FLEEP}" \
+ "${SEND_PROWL}" \
"${SEND_CUSTOM}" \
"${SEND_IRC}" \
"${SEND_AWSSNS}" \
diff --git a/health/notifications/custom/README.md b/health/notifications/custom/README.md
index a93005513..627dd9d48 100644
--- a/health/notifications/custom/README.md
+++ b/health/notifications/custom/README.md
@@ -5,6 +5,36 @@ To configure custom notifications, you will need to define the `custom_sender()`
You can look at the other senders in `/usr/libexec/netdata/plugins.d/alarm-notify.sh` for examples.
As with other notifications, you will also need to define the recipient list in `DEFAULT_RECIPIENT_CUSTOM` and/or the `role_recipients_custom` array.
+The following is a sample `custom_sender` function to send an SMS via an imaginary HTTPS endpoint to the SMS gateway:
+```
+ custom_sender() {
+ # example human readable SMS
+ local msg="${host} ${status_message}: ${alarm} ${raised_for}"
+
+ # limit it to 160 characters and encode it for use in a URL
+ urlencode "${msg:0:160}" >/dev/null; msg="${REPLY}"
+
+ # a space separated list of the recipients to send alarms to
+ to="${1}"
+
+ for phone in ${to}; do
+ httpcode=$(docurl -X POST \
+ --data-urlencode "From=XXX" \
+ --data-urlencode "To=${phone}" \
+ --data-urlencode "Body=${msg}" \
+ -u "${accountsid}:${accounttoken}" \
+ https://domain.website.com/)
+
+ if [ "${httpcode}" = "200" ]; then
+ info "sent custom notification ${msg} to ${phone}"
+ sent=$((sent + 1))
+ else
+ error "failed to send custom notification ${msg} to ${phone} with HTTP error code ${httpcode}."
+ fi
+ done
+}
+```
+
Variables available to the custom_sender:
- ${to_custom} the list of recipients for the alarm
diff --git a/health/notifications/health_alarm_notify.conf b/health/notifications/health_alarm_notify.conf
index 56b0a2844..0c6897ff9 100755
--- a/health/notifications/health_alarm_notify.conf
+++ b/health/notifications/health_alarm_notify.conf
@@ -363,10 +363,10 @@ DEFAULT_RECIPIENT_TELEGRAM=""
# enable/disable sending slack notifications
SEND_SLACK="YES"
-# Login to slack.com and create an incoming webhook. You need only one for all
-# your netdata servers (or you can have one for each of your netdata).
-# Without it, netdata cannot send slack notifications.
-# Get yours from: https://api.slack.com/incoming-webhooks
+# Login to your slack.com workspace and create an incoming webhook, using the "Incoming Webhooks" App: https://slack.com/apps/A0F7XDUAZ-incoming-webhooks
+# Do not use the instructions in https://api.slack.com/incoming-webhooks#enable_webhooks, as those webhooks work only for a single channel.
+# You need only one for all your netdata servers (or you can have one for each of your netdata).
+# Without the app and a webhook, netdata cannot send slack notifications.
SLACK_WEBHOOK_URL=""
# if a role's recipients are not configured, a notification will be send to:
@@ -773,6 +773,23 @@ custom_sender() {
# a space separated list of the recipients to send alarms to
to="${1}"
+ # Sample send SMS to an imaginary SMS gateway accessible via HTTPS
+ #for phone in ${to}; do
+ # httpcode=$(docurl -X POST \
+ # --data-urlencode "From=XXX" \
+ # --data-urlencode "To=${phone}" \
+ # --data-urlencode "Body=${msg}" \
+ # -u "${accountsid}:${accounttoken}" \
+ # https://domain.website.com/)
+ #
+ # if [ "${httpcode}" = "200" ]; then
+ # info "sent custom notification ${msg} to ${phone}"
+ # sent=$((sent + 1))
+ # else
+ # error "failed to send custom notification ${msg} to ${phone} with HTTP error code ${httpcode}."
+ # fi
+ #done
+
info "not sending custom notification to ${to}, for ${status} of '${host}.${chart}.${name}' - custom_sender() is not configured."
}
diff --git a/health/notifications/prowl/Makefile.inc b/health/notifications/prowl/Makefile.inc
new file mode 100644
index 000000000..08e4c2e54
--- /dev/null
+++ b/health/notifications/prowl/Makefile.inc
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# THIS IS NOT A COMPLETE Makefile
+# IT IS INCLUDED BY ITS PARENT'S Makefile.am
+# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
+
+# install these files
+dist_noinst_DATA += \
+ prowl/README.md \
+ prowl/Makefile.inc \
+ $(NULL)
+
diff --git a/health/notifications/prowl/README.md b/health/notifications/prowl/README.md
new file mode 100644
index 000000000..1f060edcf
--- /dev/null
+++ b/health/notifications/prowl/README.md
@@ -0,0 +1,22 @@
+# prowl
+
+(Prowl)[1] is a push notification service for iOS devices. Netdata
+supprots delivering notifications to iOS devices through Prowl.
+
+Because of how Netdata integrates with Prowl, there is a hard limit of
+at most 1000 notifications per hour (starting from the first notification
+sent). Any alerts beyond the first thousand in an hour will be dropped.
+
+Warning messages will be sent with the 'High' priority, critical messages
+will be sent with the 'Emergency' priority, and all other messages will
+be sent with the normal priority. Opening the notification's associated
+URL will take you to the Netdata dashboard of the system that issued
+the alert, directly to the chart that it triggered on.
+
+## configuration
+
+To use this, you will need a Prowl API key, which can be rquested through
+the Prowl website after registering.
+
+Once you have an API key, simply specify that as a recipient for Prowl
+notifications.
diff --git a/health/notifications/slack/README.md b/health/notifications/slack/README.md
index 6e578282e..0616de463 100644
--- a/health/notifications/slack/README.md
+++ b/health/notifications/slack/README.md
@@ -8,23 +8,14 @@ You need:
1. The **incoming webhook URL** as given by slack.com. You can use the same on all your netdata servers (or you can have multiple if you like - your decision).
2. One or more channels to post the messages to.
-Get them here: https://api.slack.com/incoming-webhooks
+To get a webhook that works on multiple channels, you will need to login to your slack.com workspace and create an incoming webhook using the [Incoming Webhooks App](https://slack.com/apps/A0F7XDUAZ-incoming-webhooks).
+Do NOT use the instructions in https://api.slack.com/incoming-webhooks#enable_webhooks, as the particular webhooks work only for a single channel.
-Set them in `/etc/netdata/health_alarm_notify.conf` (to edit it on your system run `/etc/netdata/edit-config health_alarm_notify.conf`), like this:
+Set the webhook and the recipients in `/etc/netdata/health_alarm_notify.conf` (to edit it on your system run `/etc/netdata/edit-config health_alarm_notify.conf`), like this:
```
-###############################################################################
-# sending slack notifications
-
-# note: multiple recipients can be given like this:
-# "RECIPIENT1 RECIPIENT2 ..."
-
-# enable/disable sending pushover notifications
SEND_SLACK="YES"
-# Login to slack.com and create an incoming webhook.
-# You need only one for all your netdata servers.
-# Without it, netdata cannot send slack notifications.
SLACK_WEBHOOK_URL="https://hooks.slack.com/services/XXXXXXXX/XXXXXXXX/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
# if a role's recipients are not configured, a notification will be send to: