diff options
Diffstat (limited to '')
| -rw-r--r-- | installer/functions.sh | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/installer/functions.sh b/installer/functions.sh new file mode 100644 index 000000000..36d10ec70 --- /dev/null +++ b/installer/functions.sh @@ -0,0 +1,344 @@ +# no shebang necessary - this is a library to be sourced + +# ----------------------------------------------------------------------------- +# checking the availability of commands + +which_cmd() { + which "${1}" 2>/dev/null || \ + command -v "${1}" 2>/dev/null +} + +check_cmd() { + which_cmd "${1}" >/dev/null 2>&1 && return 0 + return 1 +} + + +# ----------------------------------------------------------------------------- + +setup_terminal() { + TPUT_RESET="" + TPUT_BLACK="" + TPUT_RED="" + TPUT_GREEN="" + TPUT_YELLOW="" + TPUT_BLUE="" + TPUT_PURPLE="" + TPUT_CYAN="" + TPUT_WHITE="" + TPUT_BGBLACK="" + TPUT_BGRED="" + TPUT_BGGREEN="" + TPUT_BGYELLOW="" + TPUT_BGBLUE="" + TPUT_BGPURPLE="" + TPUT_BGCYAN="" + TPUT_BGWHITE="" + TPUT_BOLD="" + TPUT_DIM="" + TPUT_UNDERLINED="" + TPUT_BLINK="" + TPUT_INVERTED="" + TPUT_STANDOUT="" + TPUT_BELL="" + TPUT_CLEAR="" + + # Is stderr on the terminal? If not, then fail + test -t 2 || return 1 + + if check_cmd tput + then + if [ $(( $(tput colors 2>/dev/null) )) -ge 8 ] + then + # Enable colors + TPUT_RESET="$(tput sgr 0)" + TPUT_BLACK="$(tput setaf 0)" + TPUT_RED="$(tput setaf 1)" + TPUT_GREEN="$(tput setaf 2)" + TPUT_YELLOW="$(tput setaf 3)" + TPUT_BLUE="$(tput setaf 4)" + TPUT_PURPLE="$(tput setaf 5)" + TPUT_CYAN="$(tput setaf 6)" + TPUT_WHITE="$(tput setaf 7)" + TPUT_BGBLACK="$(tput setab 0)" + TPUT_BGRED="$(tput setab 1)" + TPUT_BGGREEN="$(tput setab 2)" + TPUT_BGYELLOW="$(tput setab 3)" + TPUT_BGBLUE="$(tput setab 4)" + TPUT_BGPURPLE="$(tput setab 5)" + TPUT_BGCYAN="$(tput setab 6)" + TPUT_BGWHITE="$(tput setab 7)" + TPUT_BOLD="$(tput bold)" + TPUT_DIM="$(tput dim)" + TPUT_UNDERLINED="$(tput smul)" + TPUT_BLINK="$(tput blink)" + TPUT_INVERTED="$(tput rev)" + TPUT_STANDOUT="$(tput smso)" + TPUT_BELL="$(tput bel)" + TPUT_CLEAR="$(tput clear)" + fi + fi + + return 0 +} +setup_terminal + +progress() { + echo >&2 " --- ${TPUT_DIM}${TPUT_BOLD}${*}${TPUT_RESET} --- " +} + +# ----------------------------------------------------------------------------- + +netdata_banner() { + local l1=" ^" \ + l2=" |.-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-" \ + l3=" | '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' " \ + l4=" +----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+--->" \ + sp=" " \ + netdata="netdata" start end msg="${*}" chartcolor="${TPUT_DIM}" + + [ ${#msg} -lt ${#netdata} ] && msg="${msg}${sp:0:$(( ${#netdata} - ${#msg}))}" + [ ${#msg} -gt $(( ${#l2} - 20 )) ] && msg="${msg:0:$(( ${#l2} - 23 ))}..." + + start="$(( ${#l2} / 2 - 4 ))" + [ $(( start + ${#msg} + 4 )) -gt ${#l2} ] && start=$((${#l2} - ${#msg} - 4)) + end=$(( ${start} + ${#msg} + 4 )) + + echo >&2 + echo >&2 "${chartcolor}${l1}${TPUT_RESET}" + echo >&2 "${chartcolor}${l2:0:start}${sp:0:2}${TPUT_RESET}${TPUT_BOLD}${TPUT_GREEN}${netdata}${TPUT_RESET}${chartcolor}${sp:0:$((end - start - 2 - ${#netdata}))}${l2:end:$((${#l2} - end))}${TPUT_RESET}" + echo >&2 "${chartcolor}${l3:0:start}${sp:0:2}${TPUT_RESET}${TPUT_BOLD}${TPUT_CYAN}${msg}${TPUT_RESET}${chartcolor}${sp:0:2}${l3:end:$((${#l2} - end))}${TPUT_RESET}" + echo >&2 "${chartcolor}${l4}${TPUT_RESET}" + echo >&2 +} + +# ----------------------------------------------------------------------------- +# portable service command + +service_cmd="$(which_cmd service)" +systemctl_cmd="$(which_cmd systemctl)" +service() { + local cmd="${1}" action="${2}" + + if [ ! -z "${service_cmd}" ] + then + run "${service_cmd}" "${cmd}" "${action}" + return $? + elif [ ! -z "${systemctl_cmd}" ] + then + run "${systemctl_cmd}" "${action}" "${cmd}" + return $? + fi + return 1 +} + +# ----------------------------------------------------------------------------- + +run_ok() { + printf >&2 "${TPUT_BGGREEN}${TPUT_WHITE}${TPUT_BOLD} OK ${TPUT_RESET} ${*} \n\n" +} + +run_failed() { + printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} FAILED ${TPUT_RESET} ${*} \n\n" +} + +run_logfile="/dev/null" +run() { + local user="${USER}" dir="$(basename "${PWD}")" info info_console + + if [ "${UID}" = "0" ] + then + info="[root ${dir}]# " + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]# " + else + info="[${user} ${dir}]$ " + info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]$ " + fi + + printf >> "${run_logfile}" "${info}" + printf >> "${run_logfile}" "%q " "${@}" + printf >> "${run_logfile}" " ... " + + printf >&2 "${info_console}${TPUT_BOLD}${TPUT_YELLOW}" + printf >&2 "%q " "${@}" + printf >&2 "${TPUT_RESET}\n" + + "${@}" + + local ret=$? + if [ ${ret} -ne 0 ] + then + run_failed + printf >> "${run_logfile}" "FAILED with exit code ${ret}\n" + else + run_ok + printf >> "${run_logfile}" "OK\n" + fi + + return ${ret} +} + +portable_add_user() { + local username="${1}" + + getent passwd "${username}" > /dev/null 2>&1 + [ $? -eq 0 ] && echo >&2 "User '${username}' already exists." && return 0 + + echo >&2 "Adding ${username} user account ..." + + local nologin="$(which nologin 2>/dev/null || command -v nologin 2>/dev/null || echo '/bin/false')" + + # Linux + if check_cmd useradd + then + run useradd -r -g "${username}" -c "${username}" -s "${nologin}" -d / "${username}" && return 0 + fi + + # FreeBSD + if check_cmd pw + then + run pw useradd "${username}" -d / -g "${username}" -s "${nologin}" && return 0 + fi + + # BusyBox + if check_cmd adduser + then + run adduser -D -G "${username}" "${username}" && return 0 + fi + + echo >&2 "Failed to add ${username} user account !" + + return 1 +} + +portable_add_group() { + local groupname="${1}" + + getent group "${groupname}" > /dev/null 2>&1 + [ $? -eq 0 ] && echo >&2 "Group '${groupname}' already exists." && return 0 + + echo >&2 "Adding ${groupname} user group ..." + + # Linux + if check_cmd groupadd + then + run groupadd -r "${groupname}" && return 0 + fi + + # FreeBSD + if check_cmd pw + then + run pw groupadd "${groupname}" && return 0 + fi + + # BusyBox + if check_cmd addgroup + then + run addgroup "${groupname}" && return 0 + fi + + echo >&2 "Failed to add ${groupname} user group !" + return 1 +} + +portable_add_user_to_group() { + local groupname="${1}" username="${2}" + + getent group "${groupname}" > /dev/null 2>&1 + [ $? -ne 0 ] && echo >&2 "Group '${groupname}' does not exist." && return 1 + + # find the user is already in the group + local users=$(getent group "${groupname}" | cut -d ':' -f 4) + if [[ ",${users}," =~ ,${username}, ]] + then + # username is already there + echo >&2 "User '${username}' is already in group '${groupname}'." + return 0 + else + # username is not in group + echo >&2 "Adding ${username} user to the ${groupname} group ..." + + # Linux + if check_cmd usermod + then + run usermod -a -G "${groupname}" "${username}" && return 0 + fi + + # FreeBSD + if check_cmd pw + then + run pw groupmod "${groupname}" -m "${username}" && return 0 + fi + + # BusyBox + if check_cmd addgroup + then + run addgroup "${username}" "${groupname}" && return 0 + fi + + echo >&2 "Failed to add user ${username} to group ${groupname} !" + return 1 + fi +} + +iscontainer() { + # man systemd-detect-virt + local cmd=$(which_cmd systemd-detect-virt) + if [ ! -z "${cmd}" -a -x "${cmd}" ] + then + "${cmd}" --container >/dev/null 2>&1 && return 0 + fi + + # /proc/1/sched exposes the host's pid of our init ! + # http://stackoverflow.com/a/37016302 + local pid=$( cat /proc/1/sched 2>/dev/null | head -n 1 | { IFS='(),#:' read name pid th threads; echo $pid; } ) + pid=$(( pid + 0 )) + [ ${pid} -ne 1 ] && return 0 + + # lxc sets environment variable 'container' + [ ! -z "${container}" ] && return 0 + + # docker creates /.dockerenv + # http://stackoverflow.com/a/25518345 + [ -f "/.dockerenv" ] && return 0 + + # ubuntu and debian supply /bin/running-in-container + # https://www.apt-browse.org/browse/ubuntu/trusty/main/i386/upstart/1.12.1-0ubuntu4/file/bin/running-in-container + if [ -x "/bin/running-in-container" ] + then + "/bin/running-in-container" >/dev/null 2>&1 && return 0 + fi + + return 1 +} + +issystemd() { + local pids p myns ns systemctl + + # if the directory /etc/systemd/system does not exit, it is not systemd + [ ! -d /etc/systemd/system ] && return 1 + + # if there is no systemctl command, it is not systemd + systemctl=$(which systemctl 2>/dev/null || command -v systemctl 2>/dev/null) + [ -z "${systemctl}" -o ! -x "${systemctl}" ] && return 1 + + # if pid 1 is systemd, it is systemd + [ "$(basename $(readlink /proc/1/exe) 2>/dev/null)" = "systemd" ] && return 0 + + # if systemd is not running, it is not systemd + pids=$(pidof systemd 2>/dev/null) + [ -z "${pids}" ] && return 1 + + # check if the running systemd processes are not in our namespace + myns="$(readlink /proc/self/ns/pid 2>/dev/null)" + for p in ${pids} + do + ns="$(readlink /proc/${p}/ns/pid 2>/dev/null)" + + # if pid of systemd is in our namespace, it is systemd + [ ! -z "${myns}" && "${myns}" = "${ns}" ] && return 0 + done + + # else, it is not systemd + return 1 +} |