1 files changed, 0 insertions, 252 deletions
diff --git a/kickstart-static64.sh b/kickstart-static64.sh
deleted file mode 100755
index 1fe36034..00000000
--- a/kickstart-static64.sh
+++ /dev/null
@@ -1,252 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-or-later
-# shellcheck disable=SC1117,SC2016,SC2034,SC2039,SC2059,SC2086,SC2119,SC2120,SC2129,SC2162,SC2166,SC2181
-
-umask 022
-
-# make sure UID is set
-# shellcheck disable=SC2155
-[ -z "${UID}" ] && export UID="$(id -u)"
-
-# ---------------------------------------------------------------------------------------------------------------------
-# library functions copied from installer/functions.sh
-
-which_cmd() {
-    # shellcheck disable=SC2230
-    which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null
-}
-
-check_cmd() {
-    which_cmd "${1}" >/dev/null 2>&1 && return 0
-    return 1
-}
-
-setup_terminal() {
-    TPUT_RESET=""
-    TPUT_BLACK=""
-    TPUT_RED=""
-    TPUT_GREEN=""
-    TPUT_YELLOW=""
-    TPUT_BLUE=""
-    TPUT_PURPLE=""
-    TPUT_CYAN=""
-    TPUT_WHITE=""
-    TPUT_BGBLACK=""
-    TPUT_BGRED=""
-    TPUT_BGGREEN=""
-    TPUT_BGYELLOW=""
-    TPUT_BGBLUE=""
-    TPUT_BGPURPLE=""
-    TPUT_BGCYAN=""
-    TPUT_BGWHITE=""
-    TPUT_BOLD=""
-    TPUT_DIM=""
-    TPUT_UNDERLINED=""
-    TPUT_BLINK=""
-    TPUT_INVERTED=""
-    TPUT_STANDOUT=""
-    TPUT_BELL=""
-    TPUT_CLEAR=""
-
-    # Is stderr on the terminal? If not, then fail
-    test -t 2 || return 1
-
-    if check_cmd tput
-    then
-        if [ $(( $(tput colors 2>/dev/null) )) -ge 8 ]
-        then
-            # Enable colors
-            TPUT_RESET="$(tput sgr 0)"
-            TPUT_BLACK="$(tput setaf 0)"
-            TPUT_RED="$(tput setaf 1)"
-            TPUT_GREEN="$(tput setaf 2)"
-            TPUT_YELLOW="$(tput setaf 3)"
-            TPUT_BLUE="$(tput setaf 4)"
-            TPUT_PURPLE="$(tput setaf 5)"
-            TPUT_CYAN="$(tput setaf 6)"
-            TPUT_WHITE="$(tput setaf 7)"
-            TPUT_BGBLACK="$(tput setab 0)"
-            TPUT_BGRED="$(tput setab 1)"
-            TPUT_BGGREEN="$(tput setab 2)"
-            TPUT_BGYELLOW="$(tput setab 3)"
-            TPUT_BGBLUE="$(tput setab 4)"
-            TPUT_BGPURPLE="$(tput setab 5)"
-            TPUT_BGCYAN="$(tput setab 6)"
-            TPUT_BGWHITE="$(tput setab 7)"
-            TPUT_BOLD="$(tput bold)"
-            TPUT_DIM="$(tput dim)"
-            TPUT_UNDERLINED="$(tput smul)"
-            TPUT_BLINK="$(tput blink)"
-            TPUT_INVERTED="$(tput rev)"
-            TPUT_STANDOUT="$(tput smso)"
-            TPUT_BELL="$(tput bel)"
-            TPUT_CLEAR="$(tput clear)"
-        fi
-    fi
-
-    return 0
-}
-setup_terminal || echo >/dev/null
-
-progress() {
-    echo >&2 " --- ${TPUT_DIM}${TPUT_BOLD}${*}${TPUT_RESET} --- "
-}
-
-run_ok() {
-    printf >&2 "${TPUT_BGGREEN}${TPUT_WHITE}${TPUT_BOLD} OK ${TPUT_RESET} ${*} \n\n"
-}
-
-run_failed() {
-    printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} FAILED ${TPUT_RESET} ${*} \n\n"
-}
-
-ESCAPED_PRINT_METHOD=
-printf "%q " test >/dev/null 2>&1
-[ $? -eq 0 ] && ESCAPED_PRINT_METHOD="printfq"
-escaped_print() {
-    if [ "${ESCAPED_PRINT_METHOD}" = "printfq" ]
-    then
-        printf "%q " "${@}"
-    else
-        printf "%s" "${*}"
-    fi
-    return 0
-}
-
-run_logfile="/dev/null"
-run() {
-    local user="${USER--}" dir="${PWD}" info info_console
-
-    if [ "${UID}" = "0" ]
-        then
-        info="[root ${dir}]# "
-        info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]# "
-    else
-        info="[${user} ${dir}]$ "
-        info_console="[${TPUT_DIM}${dir}${TPUT_RESET}]$ "
-    fi
-
-    printf >> "${run_logfile}" "${info}"
-    escaped_print >> "${run_logfile}" "${@}"
-    printf >> "${run_logfile}" " ... "
-
-    printf >&2 "${info_console}${TPUT_BOLD}${TPUT_YELLOW}"
-    escaped_print >&2 "${@}"
-    printf >&2 "${TPUT_RESET}\n"
-
-    "${@}"
-
-    local ret=$?
-    if [ ${ret} -ne 0 ]
-        then
-        run_failed
-        printf >> "${run_logfile}" "FAILED with exit code ${ret}\n"
-    else
-        run_ok
-        printf >> "${run_logfile}" "OK\n"
-    fi
-
-    return ${ret}
-}
-
-
-# ---------------------------------------------------------------------------------------------------------------------
-
-fatal() {
-    printf >&2 "${TPUT_BGRED}${TPUT_WHITE}${TPUT_BOLD} ABORTED ${TPUT_RESET} ${*} \n\n"
-    exit 1
-}
-
-# ---------------------------------------------------------------------------------------------------------------------
-
-if [ "$(uname -m)" != "x86_64" ]
-	then
-	fatal "Static binary versions of netdata are available only for 64bit Intel/AMD CPUs (x86_64), but yours is: $(uname -m)."
-fi
-
-if [ "$(uname -s)" != "Linux" ]
-	then
-	fatal "Static binary versions of netdata are available only for Linux, but this system is $(uname -s)"
-fi
-
-curl="$(which_cmd curl)"
-wget="$(which_cmd wget)"
-
-# ---------------------------------------------------------------------------------------------------------------------
-
-progress "Checking the latest version of static build..."
-
-BASE='https://raw.githubusercontent.com/netdata/binary-packages/master'
-
-LATEST=
-if [ ! -z "${curl}" -a -x "${curl}" ]
-then
-    LATEST="$(run ${curl} "${BASE}/netdata-latest.gz.run")"
-elif [ ! -z "${wget}" -a -x "${wget}" ]
-then
-    LATEST="$(run ${wget} -O - "${BASE}/netdata-latest.gz.run")"
-else
-    fatal "curl or wget are needed for this script to work."
-fi
-
-if [ -z "${LATEST}" ]
-	then
-	fatal "Cannot find the latest static binary version of netdata."
-fi
-
-# ---------------------------------------------------------------------------------------------------------------------
-
-progress "Downloading static netdata binary: ${LATEST}"
-
-ret=1
-if [ ! -z "${curl}" -a -x "${curl}" ]
-then
-    run ${curl} "${BASE}/${LATEST}" >"/tmp/${LATEST}"
-    ret=$?
-elif [ ! -z "${wget}" -a -x "${wget}" ]
-then
-    run ${wget} -O "/tmp/${LATEST}" "${BASE}/${LATEST}"
-    ret=$?
-else
-    fatal "curl or wget are needed for this script to work."
-fi
-
-if [ ${ret} -ne 0 -o ! -s "/tmp/${LATEST}" ]
-	then
-	fatal "Failed to download the latest static binary version of netdata."
-fi
-
-# ---------------------------------------------------------------------------------------------------------------------
-
-opts=
-inner_opts=
-while [ ! -z "${1}" ]
-do
-    if [ "${1}" = "--dont-wait" -o "${1}" = "--non-interactive" -o "${1}" = "--accept" ]
-    then
-        opts="${opts} --accept"
-    elif [ "${1}" = "--dont-start-it" ]
-    then
-        inner_opts="${inner_opts} ${1}"
-    else
-        echo >&2 "Unknown option '${1}'"
-        exit 1
-    fi
-    shift
-done
-[ ! -z "${inner_opts}" ] && inner_opts="-- ${inner_opts}"
-
-# ---------------------------------------------------------------------------------------------------------------------
-
-progress "Installing netdata"
-
-sudo=
-[ "${UID}" != "0" ] && sudo="sudo"
-run ${sudo} sh "/tmp/${LATEST}" ${opts} ${inner_opts}
-
-if [ $? -eq 0 ]
-	then
-	rm "/tmp/${LATEST}"
-else
-	echo >&2 "NOTE: did not remove: /tmp/${LATEST}"
-fi