diff options
Diffstat (limited to '')
-rw-r--r-- | libnetdata/dyn_conf/README.md | 188 |
1 files changed, 0 insertions, 188 deletions
diff --git a/libnetdata/dyn_conf/README.md b/libnetdata/dyn_conf/README.md deleted file mode 100644 index 17d059b02..000000000 --- a/libnetdata/dyn_conf/README.md +++ /dev/null @@ -1,188 +0,0 @@ -# Netdata Dynamic Configuration - -Purpose of Netdata Dynamic Configuration is to allow configuration of select Netdata plugins and options through the -Netdata API and by extension by UI. - -## HTTP API documentation - -### Summary API - -For summary of all jobs and their statuses (for all children that stream to parent) use the following URL: - -| Method | Endpoint | Description | -|:-------:|-------------------------------|------------------------------------------------------------| -| **GET** | `api/v2/job_statuses` | list of Jobs | -| **GET** | `api/v2/job_statuses?grouped` | list of Jobs (hierarchical, grouped by host/plugin/module) | - -### Dyncfg API - -### Top level - -| Method | Endpoint | Description | -|:-------:|------------------|-----------------------------------------| -| **GET** | `/api/v2/config` | registered Plugins (sent DYNCFG_ENABLE) | - -### Plugin level - -| Method | Endpoint | Description | -|:-------:|-----------------------------------|------------------------------| -| **GET** | `/api/v2/config/[plugin]` | Plugin config | -| **PUT** | `/api/v2/config/[plugin]` | update Plugin config | -| **GET** | `/api/v2/config/[plugin]/modules` | Modules registered by Plugin | -| **GET** | `/api/v2/config/[plugin]/schema` | Plugin config schema | - -### Module level - -| Method | Endpoint | Description | -|:-------:|-----------------------------------------------|---------------------------| -| **GET** | `/api/v2/config/<plugin>/[module]` | Module config | -| **PUT** | `/api/v2/config/[plugin]/[module]` | update Module config | -| **GET** | `/api/v2/config/[plugin]/[module]/jobs` | Jobs registered by Module | -| **GET** | `/api/v2/config/[plugin]/[module]/job_schema` | Job config schema | -| **GET** | `/api/v2/config/[plugin]/[module]/schema` | Module config schema | - -### Job level - only for modules where `module_type == job_array` - -| Method | Endpoint | Description | -|:----------:|------------------------------------------|--------------------------------| -| **GET** | `/api/v2/config/[plugin]/[module]/[job]` | Job config | -| **PUT** | `/api/v2/config/[plugin]/[module]/[job]` | update Job config | -| **POST** | `/api/v2/config/[plugin]/[module]/[job]` | create Job | -| **DELETE** | `/api/v2/config/[plugin]/[module]/[job]` | delete Job (created by Dyncfg) | - -## Internal Plugins API - -TBD - -## External Plugins API - -### Commands plugins can use - -#### DYNCFG_ENABLE - -Plugin signifies to agent its ability to use new dynamic config and the name it wishes to use by sending - -``` -DYNCFG_ENABLE [{PLUGIN_NAME}] -``` - -This can be sent only once per lifetime of the plugin (at startup or later) sending it multiple times is considered a -protocol violation and plugin might get terminated. - -After this command is sent the plugin has to be ready to accept all the new commands/keywords related to dynamic -configuration (this command lets agent know this plugin is dyncfg capable and wishes to use dyncfg functionality). - -#### DYNCFG_RESET - -Sending this, will reset the internal state of the agent, considering this a `DYNCFG_ENABLE`. - -``` -DYNCFG_RESET -``` - - -#### DYNCFG_REGISTER_MODULE - -``` -DYNCFG_REGISTER_MODULE {MODULE_NAME} {MODULE_TYPE} -``` - -Module has to choose one of following types at registration: - -- `single` - module itself has configuration but does not accept any jobs *(this is useful mainly for internal netdata - configurable things like webserver etc.)* - -- `job_array` - module itself **can** *(not must)* have configuration and it has an array of jobs which can be added, - modified and deleted. **this is what plugin developer needs in most cases** - -After a module has been registered agent can call `set_module_config`, `get_module_config` and `get_module_config_schema`. - -When `MODULE_TYPE` is `job_array` the agent may also send `set_job_config`, `get_job_config` and `get_job_config_schema`. - -#### DYNCFG_REGISTER_JOB - -The plugin can use `DYNCFG_REGISTER_JOB` to register its own configuration jobs. It should not register jobs configured -via DYNCFG (doing so, the agent will shutdown the plugin). - - -``` -DYNCFG_REGISTER_JOB {MODULE_NAME} {JOB_NAME} {JOB_TYPE} {FLAGS} -``` - -Where: - -- `MODULE_NAME` is the name of the module. -- `JOB_NAME` is the name of the job. -- `JOB_TYPE` is either `stock` or `autodiscovered`. -- `FLAGS`, just send zero. - -#### REPORT_JOB_STATUS - -``` -REPORT_JOB_STATUS {MODULE_NAME} {JOB_NAME} {STATUS} {STATE} ["REASON"] -``` - -Note the REASON parameter is optional and can be entirelly ommited (for example when state is OK there is no need to send any reason). - -Where: - -- `MODULE_NAME` is the name of the module. -- `JOB_NAME` is the name of the job. -- `STATUS` is one of `stopped`, `running`, or `error`. -- `STATE`, just send zero. -- `REASON` is a message describing the status. In case you don't want to send any reason string it is preferable to omit this parameter altogether (as opposed to sending empty string `""`). - - -### Commands plugins must serve - -Once a plugin calls `DYNCFG_ENABLE`, the must be able to handle these calls. - -function|parameters|prerequisites|request payload|response payload| -:---:|:---:|:---:|:---:|:---:| -`set_plugin_config`|none|`DYNCFG_ENABLE`|plugin configuration|none| -`get_plugin_config`|none|`DYNCFG_ENABLE`|none|plugin configuration| -`get_plugin_config_schema`|none|`DYNCFG_ENABLE`|none|plugin configuration schema| -`set_module_config`|`module_name`|`DYNCFG_REGISTER_MODULE`|module configuration|none| -`get_module_config`|`module_name`|`DYNCFG_REGISTER_MODULE`|none|module configuration| -`get_module_config_schema`|`module_name`|`DYNCFG_REGISTER_MODULE`|none|module configuration schema| -`set_job_config`|`module_name`, `job_name`|`DYNCFG_REGISTER_MODULE`|job configuration|none| -`get_job_config`|`module_name`, `job_name`|`DYNCFG_REGISTER_MODULE`|none|job configuration| -`get_job_config_schema`|`module_name`, `job_name`|`DYNCFG_REGISTER_MODULE`|none|job configuration schema| - -All of them work like this: - -If the request payload is `none`, then the request looks like this: - -```bash -FUNCTION {TRANSACTION_UUID} {TIMEOUT_SECONDS} "{function} {parameters}" -``` - -When there is payload, the request looks like this: - -```bash -FUNCTION_PAYLOAD {TRANSACTION_UUID} {TIMEOUT_SECONDS} "{function} {parameters}" -<payload> -FUNCTION_PAYLOAD_END -``` - -In all cases, the response is like this: - -```bash -FUNCTION_RESULT_BEGIN {TRANSACTION_UUID} {HTTP_RESPONSE_CODE} "{CONTENT_TYPE}" {EXPIRATION_TIMESTAMP} -<payload> -FUNCTION_RESULT_END -``` -Where: -- `TRANSACTION_UUID` is the same UUID received with the request. -- `HTTP_RESPONSE_CODE` is either `0` (rejected) or `1` (accepted). -- `CONTENT_TYPE` should reflect the `payload` returned. -- `EXPIRATION_TIMESTAMP` can be zero. - - -## DYNCFG with streaming - -When above commands are transferred trough streaming additionally `plugin_name` is prefixed as first parameter. This is -done to allow routing to appropriate plugin @child. - -As a plugin developer you don't need to concern yourself with this detail as that parameter is stripped when sent to the -plugin *(and added when sent trough streaming)* automagically. |