diff options
Diffstat (limited to '')
| -rwxr-xr-x | netdata-installer.sh | 102 |
1 files changed, 71 insertions, 31 deletions
diff --git a/netdata-installer.sh b/netdata-installer.sh index 6fb20287d..4ed4050fd 100755 --- a/netdata-installer.sh +++ b/netdata-installer.sh @@ -156,6 +156,9 @@ USAGE: ${PROGRAM} [options] --disable-plugin-nfacct --enable-plugin-xenstat Enable the xenstat plugin. Default: enable it when libxenstat and libyajl are available --disable-plugin-xenstat Disable the xenstat plugin. + --enable-backend-kinesis Enable AWS Kinesis backend. Default: enable it when libaws_cpp_sdk_kinesis and libraries + it depends on are available. + --disable-backend-kinesis --enable-lto Enable Link-Time-Optimization. Default: enabled --disable-lto --disable-x86-sse Disable SSE instructions. By default SSE optimizations are enabled. @@ -201,6 +204,8 @@ while [ -n "${1}" ]; do "--disable-plugin-nfacct") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--disable-plugin-nfacct/} --disable-plugin-nfacct";; "--enable-plugin-xenstat") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--enable-plugin-xenstat/} --enable-plugin-xenstat";; "--disable-plugin-xenstat") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--disable-plugin-xenstat/} --disable-plugin-xenstat";; + "--enable-backend-kinesis") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--enable-backend-kinesis/} --enable-backend-kinesis";; + "--disable-backend-kinesis") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--disable-backend-kinesis/} --disable-backend-kinesis";; "--enable-lto") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--enable-lto/} --enable-lto";; "--disable-lto") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--disable-lto/} --disable-lto";; "--disable-x86-sse") NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS//--disable-x86-sse/} --disable-x86-sse";; @@ -510,20 +515,24 @@ progress "Fix generated files permissions" run find ./system/ -type f -a \! -name \*.in -a \! -name Makefile\* -a \! -name \*.conf -a \! -name \*.service -a \! -name \*.logrotate -exec chmod 755 {} \; # ----------------------------------------------------------------------------- -progress "Add user netdata to required user groups" +progress "Creating standard user and groups for netdata" NETDATA_WANTED_GROUPS="docker nginx varnish haproxy adm nsd proxy squid ceph nobody" NETDATA_ADDED_TO_GROUPS="" if [ "${UID}" -eq 0 ]; then + progress "Adding group 'netdata'" portable_add_group netdata || : + + progress "Adding user 'netdata'" portable_add_user netdata "${NETDATA_PREFIX}/var/lib/netdata" || : + progress "Assign user 'netdata' to required groups" for g in ${NETDATA_WANTED_GROUPS}; do # shellcheck disable=SC2086 portable_add_user_to_group ${g} netdata && NETDATA_ADDED_TO_GROUPS="${NETDATA_ADDED_TO_GROUPS} ${g}" done else - run_failed "The installer does not run as root." + run_failed "The installer does not run as root. Nothing to do for user and groups" fi # ----------------------------------------------------------------------------- @@ -562,6 +571,7 @@ else fi NETDATA_GROUP="$(id -g -n "${NETDATA_USER}")" [ -z "${NETDATA_GROUP}" ] && NETDATA_GROUP="${NETDATA_USER}" +echo >&2 "Netdata user and group is finally set to: ${NETDATA_USER}/${NETDATA_GROUP}" # the owners of the web files NETDATA_WEB_USER="$(config_option "web" "web files owner" "${NETDATA_USER}")" @@ -718,6 +728,11 @@ if [ "${UID}" -eq 0 ]; then run chmod 4750 "${NETDATA_PREFIX}/usr/libexec/netdata/plugins.d/xenstat.plugin" fi + if [ -f "${NETDATA_PREFIX}/usr/libexec/netdata/plugins.d/ioping" ]; then + run chown root:${NETDATA_GROUP} "${NETDATA_PREFIX}/usr/libexec/netdata/plugins.d/ioping" + run chmod 4750 "${NETDATA_PREFIX}/usr/libexec/netdata/plugins.d/ioping" + fi + if [ -f "${NETDATA_PREFIX}/usr/libexec/netdata/plugins.d/cgroup-network" ]; then run chown "root:${NETDATA_GROUP}" "${NETDATA_PREFIX}/usr/libexec/netdata/plugins.d/cgroup-network" run chmod 4750 "${NETDATA_PREFIX}/usr/libexec/netdata/plugins.d/cgroup-network" @@ -740,7 +755,7 @@ fi install_go() { # When updating this value, ensure correct checksums in packaging/go.d.checksums - GO_PACKAGE_VERSION="v0.4.0" + GO_PACKAGE_VERSION="v0.5.0" ARCH_MAP=( 'i386::386' 'i686::386' @@ -800,7 +815,12 @@ install_go progress "Install netdata at system init" NETDATA_START_CMD="${NETDATA_PREFIX}/usr/sbin/netdata" -install_netdata_service || run_failed "Cannot install netdata init service." + +if grep -q docker /proc/1/cgroup >/dev/null 2>&1; then + echo >&2 "We are running within a docker container, will not be installing netdata service" +else + install_netdata_service || run_failed "Cannot install netdata init service." +fi # ----------------------------------------------------------------------------- # check if we can re-start netdata @@ -943,39 +963,58 @@ To start netdata run: ${TPUT_YELLOW}${TPUT_BOLD}${NETDATA_START_CMD}${TPUT_RESET} - END echo >&2 "Uninstall script copied to: ${TPUT_RED}${TPUT_BOLD}${NETDATA_PREFIX}/usr/libexec/netdata-uninstaller.sh${TPUT_RESET}" +echo >&2 -if [ "${AUTOUPDATE}" = "1" ]; then - if [ "${UID}" -ne "0" ]; then - echo >&2 "You need to run the installer as root for auto-updating via cron." - else - crondir= - [ -d "/etc/periodic/daily" ] && crondir="/etc/periodic/daily" - [ -d "/etc/cron.daily" ] && crondir="/etc/cron.daily" +progress "Install netdata updater tool" - if [ -z "${crondir}" ]; then - echo >&2 "Cannot figure out the cron directory to install netdata-updater" - else - if [ -f "${crondir}/netdata-updater.sh" ]; then - progress "Removing incorrect netdata-updater filename in cron" - rm -f "${crondir}/netdata-updater.sh" - fi - progress "Installing new netdata-updater in cron" +if [ -f "${INSTALLER_DIR}/packaging/installer/netdata-updater.sh" ]; then + sed "s|THIS_SHOULD_BE_REPLACED_BY_INSTALLER_SCRIPT|${NETDATA_USER_CONFIG_DIR}/.environment|" "${INSTALLER_DIR}/packaging/installer/netdata-updater.sh" > "${NETDATA_PREFIX}/usr/libexec/netdata-updater.sh" || exit 1 +else + sed "s|THIS_SHOULD_BE_REPLACED_BY_INSTALLER_SCRIPT|${NETDATA_USER_CONFIG_DIR}/.environment|" "${NETDATA_SOURCE_DIR}/packaging/installer/netdata-updater.sh" > "${NETDATA_PREFIX}/usr/libexec/netdata-updater.sh" || exit 1 +fi - rm -f "${crondir}/netdata-updater" - if [ -f "${INSTALLER_DIR}/packaging/installer/netdata-updater.sh" ]; then - sed "s|THIS_SHOULD_BE_REPLACED_BY_INSTALLER_SCRIPT|${NETDATA_USER_CONFIG_DIR}/.environment|" "${INSTALLER_DIR}/packaging/installer/netdata-updater.sh" > "${crondir}/netdata-updater" || exit 1 - else - sed "s|THIS_SHOULD_BE_REPLACED_BY_INSTALLER_SCRIPT|${NETDATA_USER_CONFIG_DIR}/.environment|" "${NETDATA_SOURCE_DIR}/packaging/installer/netdata-updater.sh" > "${crondir}/netdata-updater" || exit 1 - fi +chmod 0755 ${NETDATA_PREFIX}/usr/libexec/netdata-updater.sh +echo >&2 "Update script is located at ${TPUT_GREEN}${TPUT_BOLD}${NETDATA_PREFIX}/usr/libexec/netdata-updater.sh${TPUT_RESET}" +echo >&2 + +# Figure out the cron directory for the distro +crondir= +[ -d "/etc/periodic/daily" ] && crondir="/etc/periodic/daily" +[ -d "/etc/cron.daily" ] && crondir="/etc/cron.daily" + +if [ -z "${crondir}" ]; then + echo >&2 "Cannot figure out the cron directory to handle netdata-updater.sh activation/deactivation" +elif [ "${UID}" -ne "0" ]; then + # We cant touch cron if we are not running as root + echo >&2 "You need to run the installer as root for auto-updating via cron." +else + progress "Check if we must enable/disable the netdata updater" + if [ "${AUTOUPDATE}" = "1" ]; then + if [ -f "${crondir}/netdata-updater.sh" ]; then + progress "Removing incorrect netdata-updater filename in cron" + rm -f "${crondir}/netdata-updater.sh" + fi - chmod 0755 ${crondir}/netdata-updater - echo >&2 "Update script is located at ${TPUT_GREEN}${TPUT_BOLD}${crondir}/netdata-updater${TPUT_RESET}" - echo >&2 - echo >&2 "${TPUT_DIM}${TPUT_BOLD}netdata-updater${TPUT_RESET}${TPUT_DIM} works from cron. It will trigger an email from cron" - echo >&2 "only if it fails (it should not print anything when it can update netdata).${TPUT_RESET}" + echo >&2 "Adding to cron" + + rm -f "${crondir}/netdata-updater" + ln -sf "${NETDATA_PREFIX}/usr/libexec/netdata-updater.sh" "${crondir}/netdata-updater" + + echo >&2 "Auto-updating has been enabled. Updater script linked to: ${TPUT_RED}${TPUT_BOLD}${crondir}/netdata-update${TPUT_RESET}" + echo >&2 + echo >&2 "${TPUT_DIM}${TPUT_BOLD}netdata-updater.sh${TPUT_RESET}${TPUT_DIM} works from cron. It will trigger an email from cron" + echo >&2 "only if it fails (it should not print anything when it can update netdata).${TPUT_RESET}" + else + echo >&2 "You chose *NOT* to enable auto-update, removing any links to the updater from cron (it may have happened if you are reinstalling)" + echo >&2 + + if [ -f "${crondir}/netdata-updater" ]; then + echo >&2 "Removing cron reference: ${crondir}/netdata-updater" + rm -f "${crondir}/netdata-updater" + else + echo >&2 "Did not find any cron entries to remove" fi fi fi @@ -989,6 +1028,7 @@ NETDATA_PREFIX="${NETDATA_PREFIX}" NETDATA_CONFIGURE_OPTIONS="${NETDATA_CONFIGURE_OPTIONS}" NETDATA_ADDED_TO_GROUPS="${NETDATA_ADDED_TO_GROUPS}" INSTALL_UID="${UID}" +NETDATA_GROUP="${NETDATA_GROUP}" REINSTALL_COMMAND="${REINSTALL_COMMAND}" RELEASE_CHANNEL="${RELEASE_CHANNEL}" # This value is meant to be populated by autoupdater (if enabled) |