1 files changed, 0 insertions, 118 deletions
diff --git a/node.d/README.md b/node.d/README.md
deleted file mode 100644
index 6818d34de..000000000
--- a/node.d/README.md
+++ /dev/null
@@ -1,118 +0,0 @@
-# Disclaimer
-
-Module configurations are written in JSON and **node.js is required**.
-
-to be edited.
-
----
-
-The following node.d modules are supported:
-
-# fronius
-
-This module collects metrics from the configured solar power installation from Fronius Symo.
-See `netdata/conf.d/node.d/fronius.conf.md` for more details.
-
-**Requirements**
- * Configuration file `fronius.conf` in the node.d netdata config dir (default: `/etc/netdata/node.d/fronius.conf`)
- * Fronius Symo with network access (http)
-
-It produces per server:
-
-1. **Power**
- * Current power input from the grid (positive values), output to the grid (negative values), in W
- * Current power input from the solar panels, in W
- * Current power stored in the accumulator (if present), in W (in theory, untested)
-
-2. **Consumption**
- * Local consumption in W
-
-3. **Autonomy**
- * Relative autonomy in %. 100 % autonomy means that the solar panels are delivering more power than it is needed by local consumption.
- * Relative self consumption in %. The lower the better
-
-4. **Energy**
- * The energy produced during the current day, in kWh
- * The energy produced during the current year, in kWh
-
-5. **Inverter**
- * The current power output from the connected inverters, in W, one dimension per inverter. At least one is always present.
- 
- 
-### configuration
-
-Sample:
-
-```json
-{
-    "enable_autodetect": false,
-    "update_every": 5,
-    "servers": [
-        {
-            "name": "Symo",
-            "hostname": "symo.ip.or.dns",
-            "update_every": 5,
-            "api_path": "/solar_api/v1/GetPowerFlowRealtimeData.fcgi"
-        }
-    ]
-}
-```
-
-If no configuration is given, the module will be disabled. Each `update_every` is optional, the default is `5`.
-
----
-
-# stiebel eltron
-
-This module collects metrics from the configured heat pump and hot water installation from Stiebel Eltron ISG web.
-See `netdata/conf.d/node.d/stiebeleltron.conf.md` for more details.
-
-**Requirements**
- * Configuration file `stiebeleltron.conf` in the node.d netdata config dir (default: `/etc/netdata/node.d/stiebeleltron.conf`)
- * Stiebel Eltron ISG web with network access (http), without password login
-
-The charts are configurable, however, the provided default configuration collects the following:
-
-1. **General**
- * Outside temperature in C
- * Condenser temperature in C
- * Heating circuit pressure in bar
- * Flow rate in l/min
- * Output of water and heat pumps in %
-
-2. **Heating**
- * Heat circuit 1 temperature in C (set/actual)
- * Heat circuit 2 temperature in C (set/actual)
- * Flow temperature in C (set/actual)
- * Buffer temperature in C (set/actual)
- * Pre-flow temperature in C
-
-3. **Hot Water**
- * Hot water temperature in C (set/actual)
-
-4. **Room Temperature**
- * Heat circuit 1 room temperature in C (set/actual)
- * Heat circuit 2 room temperature in C (set/actual)
-
-5. **Eletric Reheating**
- * Dual Mode Reheating temperature in C (hot water/heating)
-
-6. **Process Data**
- * Remaining compressor rest time in s
-
-7. **Runtime**
- * Compressor runtime hours (hot water/heating)
- * Reheating runtime hours (reheating 1/reheating 2)
-
-8. **Energy**
- * Compressor today in kWh (hot water/heating)
- * Compressor Total in kWh (hot water/heating)
- 
- 
-### configuration
-
-The default configuration is provided in [netdata/conf.d/node.d/stiebeleltron.conf.md](https://github.com/firehol/netdata/blob/master/conf.d/node.d/stiebeleltron.conf.md). Just change the `update_every` (if necessary) and hostnames. **You may have to adapt the configuration to suit your needs and setup** (which might be different).
-
-If no configuration is given, the module will be disabled. Each `update_every` is optional, the default is `10`.
-
----