diff options
Diffstat (limited to '')
20 files changed, 2119 insertions, 0 deletions
diff --git a/packaging/makeself/README.md b/packaging/makeself/README.md new file mode 100644 index 000000000..b1dab7e0c --- /dev/null +++ b/packaging/makeself/README.md @@ -0,0 +1,48 @@ +# Netdata static binary build + +To build the static binary 64-bit distribution package, run: + +```bash +cd /path/to/netdata.git +./packaging/makeself/build-x86_64-static.sh +``` + +The program will: + +1. setup a new docker container with Alpine Linux +2. install the required alpine packages (the build environment, needed libraries, etc) +3. download and compile third party apps that are packaged with Netdata (`bash`, `curl`, etc) +4. compile Netdata + +Once finished, a file named `netdata-vX.X.X-gGITHASH-x86_64-DATE-TIME.run` will be created in the current directory. This is the Netdata binary package that can be run to install Netdata on any other computer. + +--- + +## building binaries with debug info + +To build Netdata binaries with debugging / tracing information in them, use: + +```bash +cd /path/to/netdata.git +./packaging/makeself/build-x86_64-static.sh debug +``` + +These binaries are not optimized (they are a bit slower), they have certain features disables (like log flood protection), other features enables (like `debug flags`) and are not stripped (the binary files are bigger, since they now include source code tracing information). + +### debugging Netdata binaries + +Once you have installed a binary package with debugging info, you will need to install `valgrind` and run this command to start Netdata: + +```bash +PATH="/opt/netdata/bin:${PATH}" valgrind --undef-value-errors=no /opt/netdata/bin/srv/netdata -D +``` + +The above command, will run Netdata under `valgrind`. While Netdata runs under `valgrind` it will be 10x slower and use a lot more memory. + +If Netdata crashes, `valgrind` will print a stack trace of the issue. Open a github issue to let us know. + +To stop Netdata while it runs under `valgrind`, press Control-C on the console. + +> If you omit the parameter `--undef-value-errors=no` to valgrind, you will get hundreds of errors about conditional jumps that depend on uninitialized values. This is normal. Valgrind has heuristics to prevent it from printing such errors for system libraries, but for the static Netdata binary, all the required libraries are built into Netdata. So, valgrind cannot appply its heuristics and prints them. + +[](<>) diff --git a/packaging/makeself/build-x86_64-static.sh b/packaging/makeself/build-x86_64-static.sh new file mode 100755 index 000000000..69ddf2bf5 --- /dev/null +++ b/packaging/makeself/build-x86_64-static.sh @@ -0,0 +1,42 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "$0")/../installer/functions.sh || exit 1 + +set -e + +DOCKER_CONTAINER_NAME="netdata-package-x86_64-static-alpine37" + +if ! sudo docker inspect "${DOCKER_CONTAINER_NAME}" >/dev/null 2>&1 +then + # To run interactively: + # sudo docker run -it netdata-package-x86_64-static /bin/sh + # (add -v host-dir:guest-dir:rw arguments to mount volumes) + # + # To remove images in order to re-create: + # sudo docker rm -v $(sudo docker ps -a -q -f status=exited) + # sudo docker rmi netdata-package-x86_64-static + # + # This command maps the current directory to + # /usr/src/netdata.git + # inside the container and runs the script install-alpine-packages.sh + # (also inside the container) + # + run sudo docker run -v $(pwd):/usr/src/netdata.git:rw alpine:3.7 \ + /bin/sh /usr/src/netdata.git/packaging/makeself/install-alpine-packages.sh + + # save the changes made permanently + id=$(sudo docker ps -l -q) + run sudo docker commit ${id} "${DOCKER_CONTAINER_NAME}" +fi + +# Run the build script inside the container +run sudo docker run -a stdin -a stdout -a stderr -i -t -v \ + $(pwd):/usr/src/netdata.git:rw \ + "${DOCKER_CONTAINER_NAME}" \ + /bin/sh /usr/src/netdata.git/packaging/makeself/build.sh "${@}" + +if [ "${USER}" ] + then + sudo chown -R "${USER}" . +fi diff --git a/packaging/makeself/build.sh b/packaging/makeself/build.sh new file mode 100755 index 000000000..e5804c523 --- /dev/null +++ b/packaging/makeself/build.sh @@ -0,0 +1,61 @@ +#!/usr/bin/env sh +# SPDX-License-Identifier: GPL-3.0-or-later + +# ----------------------------------------------------------------------------- +# parse command line arguments + +export NETDATA_BUILD_WITH_DEBUG=0 + +while [ ! -z "${1}" ] +do + case "${1}" in + debug) + export NETDATA_BUILD_WITH_DEBUG=1 + ;; + + *) + ;; + esac + + shift +done + + +# ----------------------------------------------------------------------------- + +# First run install-alpine-packages.sh under alpine linux to install +# the required packages. build-x86_64-static.sh will do this for you +# using docker. + +cd $(dirname "$0") || exit 1 + +# if we don't run inside the netdata repo +# download it and run from it +if [ ! -f ../../netdata-installer.sh ] +then + git clone https://github.com/netdata/netdata.git netdata.git || exit 1 + cd netdata.git/makeself || exit 1 + ./build.sh "$@" + exit $? +fi + +cat >&2 <<EOF + +This program will create a self-extracting shell package containing +a statically linked netdata, able to run on any 64bit Linux system, +without any dependencies from the target system. + +It can be used to have netdata running in no-time, or in cases the +target Linux system cannot compile netdata. + +EOF + +# read -p "Press ENTER to continue > " + +if [ ! -d tmp ] + then + mkdir tmp || exit 1 +fi + +./run-all-jobs.sh "$@" +exit $? diff --git a/packaging/makeself/functions.sh b/packaging/makeself/functions.sh new file mode 100755 index 000000000..a0b72223d --- /dev/null +++ b/packaging/makeself/functions.sh @@ -0,0 +1,62 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +# ----------------------------------------------------------------------------- + +# allow running the jobs by hand +[ -z "${NETDATA_BUILD_WITH_DEBUG}" ] && export NETDATA_BUILD_WITH_DEBUG=0 +[ -z "${NETDATA_INSTALL_PATH}" ] && export NETDATA_INSTALL_PATH="${1-/opt/netdata}" +[ -z "${NETDATA_MAKESELF_PATH}" ] && export NETDATA_MAKESELF_PATH="$(dirname "${0}")/../.." +[ "${NETDATA_MAKESELF_PATH:0:1}" != "/" ] && export NETDATA_MAKESELF_PATH="$(pwd)/${NETDATA_MAKESELF_PATH}" +[ -z "${NETDATA_SOURCE_PATH}" ] && export NETDATA_SOURCE_PATH="${NETDATA_MAKESELF_PATH}/../.." +export NULL= + +# make sure the path does not end with / +if [ "${NETDATA_INSTALL_PATH:$(( ${#NETDATA_INSTALL_PATH} - 1)):1}" = "/" ] + then + export NETDATA_INSTALL_PATH="${NETDATA_INSTALL_PATH:0:$(( ${#NETDATA_INSTALL_PATH} - 1))}" +fi + +# find the parent directory +export NETDATA_INSTALL_PARENT="$(dirname "${NETDATA_INSTALL_PATH}")" + +# ----------------------------------------------------------------------------- + +# bash strict mode +set -euo pipefail + +# ----------------------------------------------------------------------------- + +fetch() { + local dir="${1}" url="${2}" + local tar="${dir}.tar.gz" + + if [ ! -f "${NETDATA_MAKESELF_PATH}/tmp/${tar}" ] + then + run wget -O "${NETDATA_MAKESELF_PATH}/tmp/${tar}" "${url}" + fi + + if [ ! -d "${NETDATA_MAKESELF_PATH}/tmp/${dir}" ] + then + cd "${NETDATA_MAKESELF_PATH}/tmp" + run tar -zxpf "${tar}" + cd - + fi + + run cd "${NETDATA_MAKESELF_PATH}/tmp/${dir}" +} + +# ----------------------------------------------------------------------------- + +# load the functions of the netdata-installer.sh +. "${NETDATA_SOURCE_PATH}/packaging/installer/functions.sh" + +# ----------------------------------------------------------------------------- + +# debug +echo "ME=${0}" +echo "NETDATA_INSTALL_PARENT=${NETDATA_INSTALL_PARENT}" +echo "NETDATA_INSTALL_PATH=${NETDATA_INSTALL_PATH}" +echo "NETDATA_MAKESELF_PATH=${NETDATA_MAKESELF_PATH}" +echo "NETDATA_SOURCE_PATH=${NETDATA_SOURCE_PATH}" +echo "PROCESSORS=$(find_processors)" diff --git a/packaging/makeself/install-alpine-packages.sh b/packaging/makeself/install-alpine-packages.sh new file mode 100755 index 000000000..bcb971f8f --- /dev/null +++ b/packaging/makeself/install-alpine-packages.sh @@ -0,0 +1,48 @@ +#!/usr/bin/env sh +# +# Installation script for the alpine host +# to prepare the static binary +# +# Copyright: SPDX-License-Identifier: GPL-3.0-or-later +# +# Author: Paul Emm. Katsoulakis <paul@netdata.cloud> + +# Packaging update +apk update + +# Add required APK packages +apk add --no-cache \ + bash \ + wget \ + curl \ + ncurses \ + git \ + netcat-openbsd \ + alpine-sdk \ + autoconf \ + automake \ + gcc \ + make \ + libtool \ + pkgconfig \ + util-linux-dev \ + openssl-dev \ + gnutls-dev \ + zlib-dev \ + libmnl-dev \ + libnetfilter_acct-dev \ + libuv-dev \ + lz4-dev \ + openssl-dev \ + || exit 1 + +# Judy doesnt seem to be available on the repositories, download manually and install it +export JUDY_VER="1.0.5" +wget -O /judy.tar.gz http://downloads.sourceforge.net/project/judy/judy/Judy-${JUDY_VER}/Judy-${JUDY_VER}.tar.gz +cd / +tar -xf judy.tar.gz +rm judy.tar.gz +cd /judy-${JUDY_VER} +CFLAGS="-O2 -s" CXXFLAGS="-O2 -s" ./configure +make +make install; diff --git a/packaging/makeself/install-or-update.sh b/packaging/makeself/install-or-update.sh new file mode 100755 index 000000000..9796eb085 --- /dev/null +++ b/packaging/makeself/install-or-update.sh @@ -0,0 +1,243 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "${0}")/functions.sh + +export LC_ALL=C +umask 002 + +# Be nice on production environments +renice 19 $$ >/dev/null 2>/dev/null + +# ----------------------------------------------------------------------------- +if [ -d /opt/netdata/etc/netdata.old ]; then + progress "Found old etc/netdata directory, reinstating this" + [ -d /opt/netdata/etc/netdata.new ] && rm -rf /opt/netdata/etc/netdata.new + mv -f /opt/netdata/etc/netdata /opt/netdata/etc/netdata.new + mv -f /opt/netdata/etc/netdata.old /opt/netdata/etc/netdata + + progress "Trigger stock config clean up" + rm -f /opt/netdata/etc/netdata/.installer-cleanup-of-stock-configs-done +fi + +STARTIT=1 + +while [ ! -z "${1}" ] +do + if [ "${1}" = "--dont-start-it" ] + then + STARTIT=0 + else + echo >&2 "Unknown option '${1}'. Ignoring it." + fi + shift +done + +deleted_stock_configs=0 +if [ ! -f "etc/netdata/.installer-cleanup-of-stock-configs-done" ] +then + + # ----------------------------------------------------------------------------- + progress "Deleting stock configuration files from user configuration directory" + + declare -A configs_signatures=() + source "system/configs.signatures" + + if [ ! -d etc/netdata ] + then + run mkdir -p etc/netdata + fi + + md5sum="$(which md5sum 2>/dev/null || command -v md5sum 2>/dev/null || command -v md5 2>/dev/null)" + for x in $(find etc -type f) + do + # find it relative filename + f="${x/etc\/netdata\//}" + + # find the stock filename + t="${f/.conf.old/.conf}" + t="${t/.conf.orig/.conf}" + + if [ ! -z "${md5sum}" ] + then + # find the checksum of the existing file + md5="$( ${md5sum} <"${x}" | cut -d ' ' -f 1)" + #echo >&2 "md5: ${md5}" + + # check if it matches + if [ "${configs_signatures[${md5}]}" = "${t}" ] + then + # it matches the default + run rm -f "${x}" + deleted_stock_configs=$(( deleted_stock_configs + 1 )) + fi + fi + done + + touch "etc/netdata/.installer-cleanup-of-stock-configs-done" +fi + +# ----------------------------------------------------------------------------- +progress "Attempt to create user/group netdata/netadata" + +NETDATA_WANTED_GROUPS="docker nginx varnish haproxy adm nsd proxy squid ceph nobody" +NETDATA_ADDED_TO_GROUPS="" +# Default user/group +NETDATA_USER="root" +NETDATA_GROUP="root" + +if portable_add_group netdata; then + if portable_add_user netdata "/opt/netdata"; then + progress "Add user netdata to required user groups" + for g in ${NETDATA_WANTED_GROUPS}; do + # shellcheck disable=SC2086 + portable_add_user_to_group ${g} netdata && NETDATA_ADDED_TO_GROUPS="${NETDATA_ADDED_TO_GROUPS} ${g}" || run_failed "Failed to add netdata user to secondary groups" + done + NETDATA_USER="netdata" + NETDATA_GROUP="netdata" + else + run_failed "I could not add user netdata, will be using root" + fi +else + run_failed "I could not add group netdata, so no user netdata will be created as well. Netdata run as root:root" +fi + +# ----------------------------------------------------------------------------- +progress "Check SSL certificates paths" + +if [ ! -f "/etc/ssl/certs/ca-certificates.crt" ] +then + if [ ! -f /opt/netdata/.curlrc ] + then + cacert= + + # CentOS + [ -f "/etc/ssl/certs/ca-bundle.crt" ] && cacert="/etc/ssl/certs/ca-bundle.crt" + + if [ ! -z "${cacert}" ] + then + echo "Creating /opt/netdata/.curlrc with cacert=${cacert}" + echo >/opt/netdata/.curlrc "cacert=${cacert}" + else + run_failed "Failed to find /etc/ssl/certs/ca-certificates.crt" + fi + fi +fi + + +# ----------------------------------------------------------------------------- +progress "Install logrotate configuration for netdata" + +install_netdata_logrotate || run_failed "Cannot install logrotate file for netdata." + + +# ----------------------------------------------------------------------------- +progress "Install netdata at system init" + +install_netdata_service || run_failed "Cannot install netdata init service." + + +# ----------------------------------------------------------------------------- +progress "creating quick links" + +dir_should_be_link() { + local p="${1}" t="${2}" d="${3}" old + + old="${PWD}" + cd "${p}" || return 0 + + if [ -e "${d}" ] + then + if [ -h "${d}" ] + then + run rm "${d}" + else + run mv -f "${d}" "${d}.old.$$" + fi + fi + + run ln -s "${t}" "${d}" + cd "${old}" +} + +dir_should_be_link . bin sbin +dir_should_be_link usr ../bin bin +dir_should_be_link usr ../bin sbin +dir_should_be_link usr . local + +dir_should_be_link . etc/netdata netdata-configs +dir_should_be_link . usr/share/netdata/web netdata-web-files +dir_should_be_link . usr/libexec/netdata netdata-plugins +dir_should_be_link . var/lib/netdata netdata-dbs +dir_should_be_link . var/cache/netdata netdata-metrics +dir_should_be_link . var/log/netdata netdata-logs + +dir_should_be_link etc/netdata ../../usr/lib/netdata/conf.d orig + +if [ ${deleted_stock_configs} -gt 0 ] +then + dir_should_be_link etc/netdata ../../usr/lib/netdata/conf.d "000.-.USE.THE.orig.LINK.TO.COPY.AND.EDIT.STOCK.CONFIG.FILES" +fi + + +# ----------------------------------------------------------------------------- + +progress "create user config directories" + +for x in "python.d" "charts.d" "node.d" "health.d" "statsd.d" "custom-plugins.d" "ssl" +do + if [ ! -d "etc/netdata/${x}" ] + then + run mkdir -p "etc/netdata/${x}" || exit 1 + fi +done + + +# ----------------------------------------------------------------------------- +progress "fix permissions" + +run chmod g+rx,o+rx /opt +run chown -R ${NETDATA_USER}:${NETDATA_GROUP} /opt/netdata + + +# ----------------------------------------------------------------------------- + +progress "fix plugin permissions" + +for x in apps.plugin freeipmi.plugin ioping cgroup-network +do + f="usr/libexec/netdata/plugins.d/${x}" + + if [ -f "${f}" ] + then + run chown root:${NETDATA_GROUP} "${f}" + run chmod 4750 "${f}" + fi +done + +# fix the fping binary +if [ -f bin/fping ] +then + run chown root:${NETDATA_GROUP} bin/fping + run chmod 4750 bin/fping +fi + + +# ----------------------------------------------------------------------------- + +if [ ${STARTIT} -eq 0 ]; then + create_netdata_conf "/opt/netdata/etc/netdata/netdata.conf" + netdata_banner "is installed now!" +else + progress "starting netdata" + + if ! restart_netdata "/opt/netdata/bin/netdata"; then + create_netdata_conf "/opt/netdata/etc/netdata/netdata.conf" + netdata_banner "is installed and running now!" + else + create_netdata_conf "/opt/netdata/etc/netdata/netdata.conf" "http://localhost:19999/netdata.conf" + netdata_banner "is installed now!" + fi +fi +run chown "${NETDATA_USER}:${NETDATA_GROUP}" "/opt/netdata/etc/netdata/netdata.conf" +run chmod 0664 "/opt/netdata/etc/netdata/netdata.conf" diff --git a/packaging/makeself/jobs/10-prepare-destination.install.sh b/packaging/makeself/jobs/10-prepare-destination.install.sh new file mode 100755 index 000000000..06dc82f29 --- /dev/null +++ b/packaging/makeself/jobs/10-prepare-destination.install.sh @@ -0,0 +1,16 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "${0}")/../functions.sh "${@}" || exit 1 + +[ -d "${NETDATA_INSTALL_PATH}.old" ] && run rm -rf "${NETDATA_INSTALL_PATH}.old" +[ -d "${NETDATA_INSTALL_PATH}" ] && run mv -f "${NETDATA_INSTALL_PATH}" "${NETDATA_INSTALL_PATH}.old" + +run mkdir -p "${NETDATA_INSTALL_PATH}/bin" +run mkdir -p "${NETDATA_INSTALL_PATH}/usr" +run cd "${NETDATA_INSTALL_PATH}" +run ln -s bin sbin +run cd "${NETDATA_INSTALL_PATH}/usr" +run ln -s ../bin bin +run ln -s ../sbin sbin +run ln -s . local diff --git a/packaging/makeself/jobs/50-bash-4.4.18.install.sh b/packaging/makeself/jobs/50-bash-4.4.18.install.sh new file mode 100755 index 000000000..a762d37ae --- /dev/null +++ b/packaging/makeself/jobs/50-bash-4.4.18.install.sh @@ -0,0 +1,54 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "${0}")/../functions.sh "${@}" || exit 1 + +fetch "bash-4.4.18" "http://ftp.gnu.org/gnu/bash/bash-4.4.18.tar.gz" + +run ./configure \ + --prefix=${NETDATA_INSTALL_PATH} \ + --without-bash-malloc \ + --enable-static-link \ + --enable-net-redirections \ + --enable-array-variables \ + --disable-profiling \ + --disable-nls \ +# --disable-rpath \ +# --enable-alias \ +# --enable-arith-for-command \ +# --enable-array-variables \ +# --enable-brace-expansion \ +# --enable-casemod-attributes \ +# --enable-casemod-expansions \ +# --enable-command-timing \ +# --enable-cond-command \ +# --enable-cond-regexp \ +# --enable-directory-stack \ +# --enable-dparen-arithmetic \ +# --enable-function-import \ +# --enable-glob-asciiranges-default \ +# --enable-help-builtin \ +# --enable-job-control \ +# --enable-net-redirections \ +# --enable-process-substitution \ +# --enable-progcomp \ +# --enable-prompt-string-decoding \ +# --enable-readline \ +# --enable-select \ + + +run make clean +run make -j$(find_processors) + +cat >examples/loadables/Makefile <<EOF +all: +clean: +install: +EOF + +run make install + +if [ ${NETDATA_BUILD_WITH_DEBUG} -eq 0 ] +then + run strip ${NETDATA_INSTALL_PATH}/bin/bash +fi diff --git a/packaging/makeself/jobs/50-curl-7.60.0.install.sh b/packaging/makeself/jobs/50-curl-7.60.0.install.sh new file mode 100755 index 000000000..c91598251 --- /dev/null +++ b/packaging/makeself/jobs/50-curl-7.60.0.install.sh @@ -0,0 +1,34 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "${0}")/../functions.sh "${@}" || exit 1 + +fetch "curl-curl-7_60_0" "https://github.com/curl/curl/archive/curl-7_60_0.tar.gz" + +export LDFLAGS="-static" +export PKG_CONFIG="pkg-config --static" + +run ./buildconf + +run ./configure \ + --prefix=${NETDATA_INSTALL_PATH} \ + --enable-optimize \ + --disable-shared \ + --enable-static \ + --enable-http \ + --enable-proxy \ + --enable-ipv6 \ + --enable-cookies \ + ${NULL} + +# Curl autoconf does not honour the curl_LDFLAGS environment variable +run sed -i -e "s/curl_LDFLAGS =/curl_LDFLAGS = -all-static/" src/Makefile + +run make clean +run make -j$(find_processors) +run make install + +if [ ${NETDATA_BUILD_WITH_DEBUG} -eq 0 ] +then + run strip ${NETDATA_INSTALL_PATH}/bin/curl +fi diff --git a/packaging/makeself/jobs/50-fping-4.2.install.sh b/packaging/makeself/jobs/50-fping-4.2.install.sh new file mode 100755 index 000000000..a137753d8 --- /dev/null +++ b/packaging/makeself/jobs/50-fping-4.2.install.sh @@ -0,0 +1,29 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "${0}")/../functions.sh "${@}" || exit 1 + +fetch "fping-4.2" "https://github.com/schweikert/fping/releases/download/v4.2/fping-4.2.tar.gz" + +export CFLAGS="-static" + +run ./configure \ + --prefix=${NETDATA_INSTALL_PATH} \ + --enable-ipv4 \ + --enable-ipv6 \ + ${NULL} + +cat >doc/Makefile <<EOF +all: +clean: +install: +EOF + +run make clean +run make -j$(find_processors) +run make install + +if [ ${NETDATA_BUILD_WITH_DEBUG} -eq 0 ] +then + run strip ${NETDATA_INSTALL_PATH}/bin/fping +fi diff --git a/packaging/makeself/jobs/50-ioping-1.1.install.sh b/packaging/makeself/jobs/50-ioping-1.1.install.sh new file mode 100755 index 000000000..83c778c15 --- /dev/null +++ b/packaging/makeself/jobs/50-ioping-1.1.install.sh @@ -0,0 +1,18 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "${0}")/../functions.sh "${@}" || exit 1 + +fetch "netdata-ioping-43d15a5" "https://github.com/netdata/ioping/tarball/master" + +export CFLAGS="-static" + +run make clean +run make -j$(find_processors) +run mkdir -p ${NETDATA_INSTALL_PATH}/usr/libexec/netdata/plugins.d/ +run install -o root -g root -m 4750 ioping ${NETDATA_INSTALL_PATH}/usr/libexec/netdata/plugins.d/ + +if [ ${NETDATA_BUILD_WITH_DEBUG} -eq 0 ] +then + run strip ${NETDATA_INSTALL_PATH}/usr/libexec/netdata/plugins.d/ioping +fi diff --git a/packaging/makeself/jobs/70-netdata-git.install.sh b/packaging/makeself/jobs/70-netdata-git.install.sh new file mode 100755 index 000000000..80fba3158 --- /dev/null +++ b/packaging/makeself/jobs/70-netdata-git.install.sh @@ -0,0 +1,30 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. ${NETDATA_MAKESELF_PATH}/functions.sh "${@}" || exit 1 + +cd "${NETDATA_SOURCE_PATH}" || exit 1 + +if [ ${NETDATA_BUILD_WITH_DEBUG} -eq 0 ] +then + export CFLAGS="-static -O3" +else + export CFLAGS="-static -O1 -ggdb -Wall -Wextra -Wformat-signedness -fstack-protector-all -D_FORTIFY_SOURCE=2 -DNETDATA_INTERNAL_CHECKS=1" +# export CFLAGS="-static -O1 -ggdb -Wall -Wextra -Wformat-signedness" +fi + +# We export this to 'yes', installer sets this to .environment. +# The updater consumes this one, so that it can tell whether it should update a static install or a non-static one +export IS_NETDATA_STATIC_BINARY="yes" + +run ./netdata-installer.sh --install "${NETDATA_INSTALL_PARENT}" \ + --dont-wait \ + --dont-start-it \ + ${NULL} + +if [ ${NETDATA_BUILD_WITH_DEBUG} -eq 0 ] +then + run strip ${NETDATA_INSTALL_PATH}/bin/netdata + run strip ${NETDATA_INSTALL_PATH}/usr/libexec/netdata/plugins.d/apps.plugin + run strip ${NETDATA_INSTALL_PATH}/usr/libexec/netdata/plugins.d/cgroup-network +fi diff --git a/packaging/makeself/jobs/99-makeself.install.sh b/packaging/makeself/jobs/99-makeself.install.sh new file mode 100755 index 000000000..f3056e6ac --- /dev/null +++ b/packaging/makeself/jobs/99-makeself.install.sh @@ -0,0 +1,99 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +. $(dirname "${0}")/../functions.sh "${@}" || exit 1 + +run cd "${NETDATA_SOURCE_PATH}" || exit 1 + +# ----------------------------------------------------------------------------- +# find the netdata version + +VERSION="$(git describe 2>/dev/null)" +if [ -z "${VERSION}" ]; then + VERSION=$(cat packaging/version) +fi + +if [ "${VERSION}" == "" ]; then + echo >&2 "Cannot find version number. Create makeself executable from source code with git tree structure." + exit 1 +fi + +# ----------------------------------------------------------------------------- +# copy the files needed by makeself installation + +run mkdir -p "${NETDATA_INSTALL_PATH}/system" + +run cp \ + packaging/makeself/post-installer.sh \ + packaging/makeself/install-or-update.sh \ + packaging/installer/functions.sh \ + configs.signatures \ + system/netdata-init-d \ + system/netdata-lsb \ + system/netdata-openrc \ + system/netdata.logrotate \ + system/netdata.service \ + "${NETDATA_INSTALL_PATH}/system/" + + +# ----------------------------------------------------------------------------- +# create a wrapper to start our netdata with a modified path + +run mkdir -p "${NETDATA_INSTALL_PATH}/bin/srv" + +run mv "${NETDATA_INSTALL_PATH}/bin/netdata" \ + "${NETDATA_INSTALL_PATH}/bin/srv/netdata" || exit 1 + +cat >"${NETDATA_INSTALL_PATH}/bin/netdata" <<EOF +#!${NETDATA_INSTALL_PATH}/bin/bash +export NETDATA_BASH_LOADABLES="DISABLE" +export PATH="${NETDATA_INSTALL_PATH}/bin:\${PATH}" +exec "${NETDATA_INSTALL_PATH}/bin/srv/netdata" "\${@}" +EOF +run chmod 755 "${NETDATA_INSTALL_PATH}/bin/netdata" + + +# ----------------------------------------------------------------------------- +# remove the links to allow untaring the archive + +run rm "${NETDATA_INSTALL_PATH}/sbin" \ + "${NETDATA_INSTALL_PATH}/usr/bin" \ + "${NETDATA_INSTALL_PATH}/usr/sbin" \ + "${NETDATA_INSTALL_PATH}/usr/local" + + +# ----------------------------------------------------------------------------- +# create the makeself archive + +run sed "s|NETDATA_VERSION|${VERSION}|g" <"${NETDATA_MAKESELF_PATH}/makeself.lsm" >"${NETDATA_MAKESELF_PATH}/makeself.lsm.tmp" + +run "${NETDATA_MAKESELF_PATH}/makeself.sh" \ + --gzip \ + --complevel 9 \ + --notemp \ + --needroot \ + --target "${NETDATA_INSTALL_PATH}" \ + --header "${NETDATA_MAKESELF_PATH}/makeself-header.sh" \ + --lsm "${NETDATA_MAKESELF_PATH}/makeself.lsm.tmp" \ + --license "${NETDATA_MAKESELF_PATH}/makeself-license.txt" \ + --help-header "${NETDATA_MAKESELF_PATH}/makeself-help-header.txt" \ + "${NETDATA_INSTALL_PATH}" \ + "${NETDATA_INSTALL_PATH}.gz.run" \ + "netdata, the real-time performance and health monitoring system" \ + ./system/post-installer.sh \ + ${NULL} + +run rm "${NETDATA_MAKESELF_PATH}/makeself.lsm.tmp" + +# ----------------------------------------------------------------------------- +# copy it to the netdata build dir + +FILE="netdata-${VERSION}.gz.run" + +run mkdir -p artifacts +run mv "${NETDATA_INSTALL_PATH}.gz.run" "artifacts/${FILE}" + +[ -f netdata-latest.gz.run ] && rm netdata-latest.gz.run +run ln -s "artifacts/${FILE}" netdata-latest.gz.run + +echo >&2 "Self-extracting installer moved to 'artifacts/${FILE}'" diff --git a/packaging/makeself/makeself-header.sh b/packaging/makeself/makeself-header.sh new file mode 100755 index 000000000..43ddd7746 --- /dev/null +++ b/packaging/makeself/makeself-header.sh @@ -0,0 +1,557 @@ +# SPDX-License-Identifier: GPL-3.0-or-later +cat << EOF > "$archname" +#!/bin/sh +# This script was generated using Makeself $MS_VERSION + +ORIG_UMASK=\`umask\` +if test "$KEEP_UMASK" = n; then + umask 077 +fi + +CRCsum="$CRCsum" +MD5="$MD5sum" +TMPROOT=\${TMPDIR:=/tmp} +USER_PWD="\$PWD"; export USER_PWD + +label="$LABEL" +script="$SCRIPT" +scriptargs="$SCRIPTARGS" +licensetxt="$LICENSE" +helpheader='$HELPHEADER' +targetdir="$archdirname" +filesizes="$filesizes" +keep="$KEEP" +nooverwrite="$NOOVERWRITE" +quiet="n" +accept="n" +nodiskspace="n" +export_conf="$EXPORT_CONF" + +print_cmd_arg="" +if type printf > /dev/null; then + print_cmd="printf" +elif test -x /usr/ucb/echo; then + print_cmd="/usr/ucb/echo" +else + print_cmd="echo" +fi + +if test -d /usr/xpg4/bin; then + PATH=/usr/xpg4/bin:\$PATH + export PATH +fi + +unset CDPATH + +MS_Printf() +{ + \$print_cmd \$print_cmd_arg "\$1" +} + +MS_PrintLicense() +{ + if test x"\$licensetxt" != x; then + echo "\$licensetxt" + if test x"\$accept" != xy; then + while true + do + MS_Printf "Please type y to accept, n otherwise: " + read yn + if test x"\$yn" = xn; then + keep=n + eval \$finish; exit 1 + break; + elif test x"\$yn" = xy; then + break; + fi + done + fi + fi +} + +MS_diskspace() +{ + ( + df -kP "\$1" | tail -1 | awk '{ if (\$4 ~ /%/) {print \$3} else {print \$4} }' + ) +} + +MS_dd() +{ + blocks=\`expr \$3 / 1024\` + bytes=\`expr \$3 % 1024\` + dd if="\$1" ibs=\$2 skip=1 obs=1024 conv=sync 2> /dev/null | \\ + { test \$blocks -gt 0 && dd ibs=1024 obs=1024 count=\$blocks ; \\ + test \$bytes -gt 0 && dd ibs=1 obs=1024 count=\$bytes ; } 2> /dev/null +} + +MS_dd_Progress() +{ + if test x"\$noprogress" = xy; then + MS_dd \$@ + return \$? + fi + file="\$1" + offset=\$2 + length=\$3 + pos=0 + bsize=4194304 + while test \$bsize -gt \$length; do + bsize=\`expr \$bsize / 4\` + done + blocks=\`expr \$length / \$bsize\` + bytes=\`expr \$length % \$bsize\` + ( + dd ibs=\$offset skip=1 2>/dev/null + pos=\`expr \$pos \+ \$bsize\` + MS_Printf " 0%% " 1>&2 + if test \$blocks -gt 0; then + while test \$pos -le \$length; do + dd bs=\$bsize count=1 2>/dev/null + pcent=\`expr \$length / 100\` + pcent=\`expr \$pos / \$pcent\` + if test \$pcent -lt 100; then + MS_Printf "\b\b\b\b\b\b\b" 1>&2 + if test \$pcent -lt 10; then + MS_Printf " \$pcent%% " 1>&2 + else + MS_Printf " \$pcent%% " 1>&2 + fi + fi + pos=\`expr \$pos \+ \$bsize\` + done + fi + if test \$bytes -gt 0; then + dd bs=\$bytes count=1 2>/dev/null + fi + MS_Printf "\b\b\b\b\b\b\b" 1>&2 + MS_Printf " 100%% " 1>&2 + ) < "\$file" +} + +MS_Help() +{ + cat << EOH >&2 +\${helpheader}Makeself version $MS_VERSION + 1) Getting help or info about \$0 : + \$0 --help Print this message + \$0 --info Print embedded info : title, default target directory, embedded script ... + \$0 --lsm Print embedded lsm entry (or no LSM) + \$0 --list Print the list of files in the archive + \$0 --check Checks integrity of the archive + + 2) Running \$0 : + \$0 [options] [--] [additional arguments to embedded script] + with following options (in that order) + --confirm Ask before running embedded script + --quiet Do not print anything except error messages + --accept Accept the license + --noexec Do not run embedded script + --keep Do not erase target directory after running + the embedded script + --noprogress Do not show the progress during the decompression + --nox11 Do not spawn an xterm + --nochown Do not give the extracted files to the current user + --nodiskspace Do not check for available disk space + --target dir Extract directly to a target directory + directory path can be either absolute or relative + --tar arg1 [arg2 ...] Access the contents of the archive through the tar command + -- Following arguments will be passed to the embedded script +EOH +} + +MS_Check() +{ + OLD_PATH="\$PATH" + PATH=\${GUESS_MD5_PATH:-"\$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"} + MD5_ARG="" + MD5_PATH=\`exec <&- 2>&-; which md5sum || command -v md5sum || type md5sum\` + test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which md5 || command -v md5 || type md5\` + test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which digest || command -v digest || type digest\` + PATH="\$OLD_PATH" + + if test x"\$quiet" = xn; then + MS_Printf "Verifying archive integrity..." + fi + offset=\`head -n $SKIP "\$1" | wc -c | tr -d " "\` + verb=\$2 + i=1 + for s in \$filesizes + do + crc=\`echo \$CRCsum | cut -d" " -f\$i\` + if test -x "\$MD5_PATH"; then + if test x"\`basename \$MD5_PATH\`" = xdigest; then + MD5_ARG="-a md5" + fi + md5=\`echo \$MD5 | cut -d" " -f\$i\` + if test x"\$md5" = x00000000000000000000000000000000; then + test x"\$verb" = xy && echo " \$1 does not contain an embedded MD5 checksum." >&2 + else + md5sum=\`MS_dd_Progress "\$1" \$offset \$s | eval "\$MD5_PATH \$MD5_ARG" | cut -b-32\`; + if test x"\$md5sum" != x"\$md5"; then + echo "Error in MD5 checksums: \$md5sum is different from \$md5" >&2 + exit 2 + else + test x"\$verb" = xy && MS_Printf " MD5 checksums are OK." >&2 + fi + crc="0000000000"; verb=n + fi + fi + if test x"\$crc" = x0000000000; then + test x"\$verb" = xy && echo " \$1 does not contain a CRC checksum." >&2 + else + sum1=\`MS_dd_Progress "\$1" \$offset \$s | CMD_ENV=xpg4 cksum | awk '{print \$1}'\` + if test x"\$sum1" = x"\$crc"; then + test x"\$verb" = xy && MS_Printf " CRC checksums are OK." >&2 + else + echo "Error in checksums: \$sum1 is different from \$crc" >&2 + exit 2; + fi + fi + i=\`expr \$i + 1\` + offset=\`expr \$offset + \$s\` + done + if test x"\$quiet" = xn; then + echo " All good." + fi +} + +UnTAR() +{ + if test x"\$quiet" = xn; then + tar \$1vf - $UNTAR_EXTRA 2>&1 || { echo " ... Extraction failed." > /dev/tty; kill -15 \$$; } + else + tar \$1f - $UNTAR_EXTRA 2>&1 || { echo Extraction failed. > /dev/tty; kill -15 \$$; } + fi +} + +finish=true +xterm_loop= +noprogress=$NOPROGRESS +nox11=$NOX11 +copy=$COPY +ownership=y +verbose=n + +initargs="\$@" + +while true +do + case "\$1" in + -h | --help) + MS_Help + exit 0 + ;; + -q | --quiet) + quiet=y + noprogress=y + shift + ;; + --accept) + accept=y + shift + ;; + --info) + echo Identification: "\$label" + echo Target directory: "\$targetdir" + echo Uncompressed size: $USIZE KB + echo Compression: $COMPRESS + echo Date of packaging: $DATE + echo Built with Makeself version $MS_VERSION on $OSTYPE + echo Build command was: "$MS_COMMAND" + if test x"\$script" != x; then + echo Script run after extraction: + echo " " \$script \$scriptargs + fi + if test x"$copy" = xcopy; then + echo "Archive will copy itself to a temporary location" + fi + if test x"$NEED_ROOT" = xy; then + echo "Root permissions required for extraction" + fi + if test x"$KEEP" = xy; then + echo "directory \$targetdir is permanent" + else + echo "\$targetdir will be removed after extraction" + fi + exit 0 + ;; + --dumpconf) + echo LABEL=\"\$label\" + echo SCRIPT=\"\$script\" + echo SCRIPTARGS=\"\$scriptargs\" + echo archdirname=\"$archdirname\" + echo KEEP=$KEEP + echo NOOVERWRITE=$NOOVERWRITE + echo COMPRESS=$COMPRESS + echo filesizes=\"\$filesizes\" + echo CRCsum=\"\$CRCsum\" + echo MD5sum=\"\$MD5\" + echo OLDUSIZE=$USIZE + echo OLDSKIP=`expr $SKIP + 1` + exit 0 + ;; + --lsm) +cat << EOLSM +EOF +eval "$LSM_CMD" +cat << EOF >> "$archname" +EOLSM + exit 0 + ;; + --list) + echo Target directory: \$targetdir + offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\` + for s in \$filesizes + do + MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | UnTAR t + offset=\`expr \$offset + \$s\` + done + exit 0 + ;; + --tar) + offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\` + arg1="\$2" + if ! shift 2; then MS_Help; exit 1; fi + for s in \$filesizes + do + MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | tar "\$arg1" - "\$@" + offset=\`expr \$offset + \$s\` + done + exit 0 + ;; + --check) + MS_Check "\$0" y + exit 0 + ;; + --confirm) + verbose=y + shift + ;; + --noexec) + script="" + shift + ;; + --keep) + keep=y + shift + ;; + --target) + keep=y + targetdir=\${2:-.} + if ! shift 2; then MS_Help; exit 1; fi + ;; + --noprogress) + noprogress=y + shift + ;; + --nox11) + nox11=y + shift + ;; + --nochown) + ownership=n + shift + ;; + --nodiskspace) + nodiskspace=y + shift + ;; + --xwin) + if test "$NOWAIT" = n; then + finish="echo Press Return to close this window...; read junk" + fi + xterm_loop=1 + shift + ;; + --phase2) + copy=phase2 + shift + ;; + --) + shift + break ;; + -*) + echo Unrecognized flag : "\$1" >&2 + MS_Help + exit 1 + ;; + *) + break ;; + esac +done + +if test x"\$quiet" = xy -a x"\$verbose" = xy; then + echo Cannot be verbose and quiet at the same time. >&2 + exit 1 +fi + +if test x"$NEED_ROOT" = xy -a \`id -u\` -ne 0; then + echo "Administrative privileges required for this archive (use su or sudo)" >&2 + exit 1 +fi + +if test x"\$copy" \!= xphase2; then + MS_PrintLicense +fi + +case "\$copy" in +copy) + tmpdir=\$TMPROOT/makeself.\$RANDOM.\`date +"%y%m%d%H%M%S"\`.\$\$ + mkdir "\$tmpdir" || { + echo "Could not create temporary directory \$tmpdir" >&2 + exit 1 + } + SCRIPT_COPY="\$tmpdir/makeself" + echo "Copying to a temporary location..." >&2 + cp "\$0" "\$SCRIPT_COPY" + chmod +x "\$SCRIPT_COPY" + cd "\$TMPROOT" + exec "\$SCRIPT_COPY" --phase2 -- \$initargs + ;; +phase2) + finish="\$finish ; rm -rf \`dirname \$0\`" + ;; +esac + +if test x"\$nox11" = xn; then + if tty -s; then # Do we have a terminal? + : + else + if test x"\$DISPLAY" != x -a x"\$xterm_loop" = x; then # No, but do we have X? + if xset q > /dev/null 2>&1; then # Check for valid DISPLAY variable + GUESS_XTERMS="xterm gnome-terminal rxvt dtterm eterm Eterm xfce4-terminal lxterminal kvt konsole aterm terminology" + for a in \$GUESS_XTERMS; do + if type \$a >/dev/null 2>&1; then + XTERM=\$a + break + fi + done + chmod a+x \$0 || echo Please add execution rights on \$0 + if test \`echo "\$0" | cut -c1\` = "/"; then # Spawn a terminal! + exec \$XTERM -title "\$label" -e "\$0" --xwin "\$initargs" + else + exec \$XTERM -title "\$label" -e "./\$0" --xwin "\$initargs" + fi + fi + fi + fi +fi + +[ -d "\$targetdir/etc/netdata.old" ] && echo "Moving existing old directory" && mv "\$targetdir/etc/netdata.old" "\$targetdir/etc/netdata.old.$$" +[ -d \$targetdir/etc/netdata ] && echo "Backing up existing directory" && cp -r \$targetdir/etc/netdata "\$targetdir/etc/netdata.old" + +if test x"\$targetdir" = x.; then + tmpdir="." +else + if test x"\$keep" = xy; then + if test x"\$nooverwrite" = xy && test -d "\$targetdir"; then + echo "Target directory \$targetdir already exists, aborting." >&2 + exit 1 + fi + if test x"\$quiet" = xn; then + echo "Creating directory \$targetdir" >&2 + fi + tmpdir="\$targetdir" + dashp="-p" + else + tmpdir="\$TMPROOT/selfgz\$\$\$RANDOM" + dashp="" + fi + mkdir \$dashp \$tmpdir || { + echo 'Cannot create target directory' \$tmpdir >&2 + echo 'You should try option --target dir' >&2 + eval \$finish + exit 1 + } +fi + +location="\`pwd\`" +if test x"\$SETUP_NOCHECK" != x1; then + MS_Check "\$0" +fi +offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\` + +if test x"\$verbose" = xy; then + MS_Printf "About to extract $USIZE KB in \$tmpdir ... Proceed ? [Y/n] " + read yn + if test x"\$yn" = xn; then + eval \$finish; exit 1 + fi +fi + +if test x"\$quiet" = xn; then + MS_Printf "Uncompressing \$label" +fi +res=3 +if test x"\$keep" = xn; then + trap 'echo Signal caught, cleaning up >&2; cd \$TMPROOT; /bin/rm -rf \$tmpdir; eval \$finish; exit 15' 1 2 3 15 +fi + +if test x"\$nodiskspace" = xn; then + leftspace=\`MS_diskspace \$tmpdir\` + if test -n "\$leftspace"; then + if test "\$leftspace" -lt $USIZE; then + echo + echo "Not enough space left in "\`dirname \$tmpdir\`" (\$leftspace KB) to decompress \$0 ($USIZE KB)" >&2 + echo "Use --nodiskspace option to skip this check and proceed anyway" >&2 + if test x"\$keep" = xn; then + echo "Consider setting TMPDIR to a directory with more free space." + fi + eval \$finish; exit 1 + fi + fi +fi + +for s in \$filesizes +do + if MS_dd_Progress "\$0" \$offset \$s | eval "$GUNZIP_CMD" | ( cd "\$tmpdir"; umask \$ORIG_UMASK ; UnTAR xp ) 1>/dev/null; then + if test x"\$ownership" = xy; then + (cd "\$tmpdir"; chown -R \`id -u\` .; chgrp -R \`id -g\` .) + fi + else + echo >&2 + echo "Unable to decompress \$0" >&2 + eval \$finish; exit 1 + fi + offset=\`expr \$offset + \$s\` +done +if test x"\$quiet" = xn; then + echo +fi + +cd "\$tmpdir" +res=0 +if test x"\$script" != x; then + if test x"\$export_conf" = x"y"; then + MS_BUNDLE="\$0" + MS_LABEL="\$label" + MS_SCRIPT="\$script" + MS_SCRIPTARGS="\$scriptargs" + MS_ARCHDIRNAME="\$archdirname" + MS_KEEP="\$KEEP" + MS_NOOVERWRITE="\$NOOVERWRITE" + MS_COMPRESS="\$COMPRESS" + export MS_BUNDLE MS_LABEL MS_SCRIPT MS_SCRIPTARGS + export MS_ARCHDIRNAME MS_KEEP MS_NOOVERWRITE MS_COMPRESS + fi + + if test x"\$verbose" = x"y"; then + MS_Printf "OK to execute: \$script \$scriptargs \$* ? [Y/n] " + read yn + if test x"\$yn" = x -o x"\$yn" = xy -o x"\$yn" = xY; then + eval "\"\$script\" \$scriptargs \"\\\$@\""; res=\$?; + fi + else + eval "\"\$script\" \$scriptargs \"\\\$@\""; res=\$? + fi + if test "\$res" -ne 0; then + test x"\$verbose" = xy && echo "The program '\$script' returned an error code (\$res)" >&2 + fi +fi +if test x"\$keep" = xn; then + cd \$TMPROOT + /bin/rm -rf \$tmpdir +fi +eval \$finish; exit \$res +EOF diff --git a/packaging/makeself/makeself-help-header.txt b/packaging/makeself/makeself-help-header.txt new file mode 100644 index 000000000..bf482c465 --- /dev/null +++ b/packaging/makeself/makeself-help-header.txt @@ -0,0 +1,44 @@ + + ^ + |.-. .-. .-. .-. . netdata + | '-' '-' '-' '-' real-time performance monitoring, done right! + +----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+---> + + (C) Copyright 2017, Costa Tsaousis + All rights reserved + Released under GPL v3+ + + You are about to install netdata to this system. + netdata will be installed at: + + /opt/netdata + + The following changes will be made to your system: + + # USERS / GROUPS + User 'netdata' and group 'netdata' will be added, if not present. + + # LOGROTATE + This file will be installed if logrotate is present. + + - /etc/logrotate.d/netdata + + # SYSTEM INIT + This file will be installed if this system runs with systemd: + + - /lib/systemd/system/netdata.service + + or, for older Centos, Debian/Ubuntu or OpenRC Gentoo: + + - /etc/init.d/netdata will be created + + + This package can also update a netdata installation that has been + created with another version of it. + + Your netdata configuration will be retained. + After installation, netdata will be (re-)started. + + netdata re-distributes a lot of open source software components. + Check its full license at: + https://github.com/netdata/netdata/blob/master/LICENSE.md diff --git a/packaging/makeself/makeself-license.txt b/packaging/makeself/makeself-license.txt new file mode 100644 index 000000000..bf482c465 --- /dev/null +++ b/packaging/makeself/makeself-license.txt @@ -0,0 +1,44 @@ + + ^ + |.-. .-. .-. .-. . netdata + | '-' '-' '-' '-' real-time performance monitoring, done right! + +----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+---> + + (C) Copyright 2017, Costa Tsaousis + All rights reserved + Released under GPL v3+ + + You are about to install netdata to this system. + netdata will be installed at: + + /opt/netdata + + The following changes will be made to your system: + + # USERS / GROUPS + User 'netdata' and group 'netdata' will be added, if not present. + + # LOGROTATE + This file will be installed if logrotate is present. + + - /etc/logrotate.d/netdata + + # SYSTEM INIT + This file will be installed if this system runs with systemd: + + - /lib/systemd/system/netdata.service + + or, for older Centos, Debian/Ubuntu or OpenRC Gentoo: + + - /etc/init.d/netdata will be created + + + This package can also update a netdata installation that has been + created with another version of it. + + Your netdata configuration will be retained. + After installation, netdata will be (re-)started. + + netdata re-distributes a lot of open source software components. + Check its full license at: + https://github.com/netdata/netdata/blob/master/LICENSE.md diff --git a/packaging/makeself/makeself.lsm b/packaging/makeself/makeself.lsm new file mode 100644 index 000000000..6bd4703db --- /dev/null +++ b/packaging/makeself/makeself.lsm @@ -0,0 +1,16 @@ +Begin3 +Title: netdata +Version: NETDATA_VERSION +Description: netdata is a system for distributed real-time performance and health monitoring. + It provides unparalleled insights, in real-time, of everything happening on the + system it runs (including applications such as web and database servers), using + modern interactive web dashboards. netdata is fast and efficient, designed to + permanently run on all systems (physical & virtual servers, containers, IoT + devices), without disrupting their core function. +Keywords: real-time performance and health monitoring +Author: Costa Tsaousis (costa@tsaousis.gr) +Maintained-by: Costa Tsaousis (costa@tsaousis.gr) +Original-site: https://my-netdata.io/ +Platform: Unix +Copying-policy: GPL +End diff --git a/packaging/makeself/makeself.sh b/packaging/makeself/makeself.sh new file mode 100755 index 000000000..f3cb69976 --- /dev/null +++ b/packaging/makeself/makeself.sh @@ -0,0 +1,621 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-3.0-or-later +# +# Makeself version 2.3.x +# by Stephane Peter <megastep@megastep.org> +# +# Utility to create self-extracting tar.gz archives. +# The resulting archive is a file holding the tar.gz archive with +# a small Shell script stub that uncompresses the archive to a temporary +# directory and then executes a given script from withing that directory. +# +# Makeself home page: http://makeself.io/ +# +# Version 2.0 is a rewrite of version 1.0 to make the code easier to read and maintain. +# +# Version history : +# - 1.0 : Initial public release +# - 1.1 : The archive can be passed parameters that will be passed on to +# the embedded script, thanks to John C. Quillan +# - 1.2 : Package distribution, bzip2 compression, more command line options, +# support for non-temporary archives. Ideas thanks to Francois Petitjean +# - 1.3 : More patches from Bjarni R. Einarsson and Francois Petitjean: +# Support for no compression (--nocomp), script is no longer mandatory, +# automatic launch in an xterm, optional verbose output, and -target +# archive option to indicate where to extract the files. +# - 1.4 : Improved UNIX compatibility (Francois Petitjean) +# Automatic integrity checking, support of LSM files (Francois Petitjean) +# - 1.5 : Many bugfixes. Optionally disable xterm spawning. +# - 1.5.1 : More bugfixes, added archive options -list and -check. +# - 1.5.2 : Cosmetic changes to inform the user of what's going on with big +# archives (Quake III demo) +# - 1.5.3 : Check for validity of the DISPLAY variable before launching an xterm. +# More verbosity in xterms and check for embedded command's return value. +# Bugfix for Debian 2.0 systems that have a different "print" command. +# - 1.5.4 : Many bugfixes. Print out a message if the extraction failed. +# - 1.5.5 : More bugfixes. Added support for SETUP_NOCHECK environment variable to +# bypass checksum verification of archives. +# - 1.6.0 : Compute MD5 checksums with the md5sum command (patch from Ryan Gordon) +# - 2.0 : Brand new rewrite, cleaner architecture, separated header and UNIX ports. +# - 2.0.1 : Added --copy +# - 2.1.0 : Allow multiple tarballs to be stored in one archive, and incremental updates. +# Added --nochown for archives +# Stopped doing redundant checksums when not necesary +# - 2.1.1 : Work around insane behavior from certain Linux distros with no 'uncompress' command +# Cleaned up the code to handle error codes from compress. Simplified the extraction code. +# - 2.1.2 : Some bug fixes. Use head -n to avoid problems. +# - 2.1.3 : Bug fixes with command line when spawning terminals. +# Added --tar for archives, allowing to give arbitrary arguments to tar on the contents of the archive. +# Added --noexec to prevent execution of embedded scripts. +# Added --nomd5 and --nocrc to avoid creating checksums in archives. +# Added command used to create the archive in --info output. +# Run the embedded script through eval. +# - 2.1.4 : Fixed --info output. +# Generate random directory name when extracting files to . to avoid problems. (Jason Trent) +# Better handling of errors with wrong permissions for the directory containing the files. (Jason Trent) +# Avoid some race conditions (Ludwig Nussel) +# Unset the $CDPATH variable to avoid problems if it is set. (Debian) +# Better handling of dot files in the archive directory. +# - 2.1.5 : Made the md5sum detection consistent with the header code. +# Check for the presence of the archive directory +# Added --encrypt for symmetric encryption through gpg (Eric Windisch) +# Added support for the digest command on Solaris 10 for MD5 checksums +# Check for available disk space before extracting to the target directory (Andreas Schweitzer) +# Allow extraction to run asynchronously (patch by Peter Hatch) +# Use file descriptors internally to avoid error messages (patch by Kay Tiong Khoo) +# - 2.1.6 : Replaced one dot per file progress with a realtime progress percentage and a spining cursor (Guy Baconniere) +# Added --noprogress to prevent showing the progress during the decompression (Guy Baconniere) +# Added --target dir to allow extracting directly to a target directory (Guy Baconniere) +# - 2.2.0 : Many bugfixes, updates and contributions from users. Check out the project page on Github for the details. +# - 2.3.0 : Option to specify packaging date to enable byte-for-byte reproducibility. (Marc Pawlowsky) +# +# (C) 1998-2017 by Stephane Peter <megastep@megastep.org> +# +# This software is released under the terms of the GNU GPL version 2 and above +# Please read the license at http://www.gnu.org/copyleft/gpl.html +# + +MS_VERSION=2.3.1 +MS_COMMAND="$0" +unset CDPATH + +for f in "${1+"$@"}"; do + MS_COMMAND="$MS_COMMAND \\\\ + \\\"$f\\\"" +done + +# For Solaris systems +if test -d /usr/xpg4/bin; then + PATH=/usr/xpg4/bin:$PATH + export PATH +fi + +# Procedures + +MS_Usage() +{ + echo "Usage: $0 [params] archive_dir file_name label startup_script [args]" + echo "params can be one or more of the following :" + echo " --version | -v : Print out Makeself version number and exit" + echo " --help | -h : Print out this help message" + echo " --tar-quietly : Suppress verbose output from the tar command" + echo " --quiet | -q : Do not print any messages other than errors." + echo " --gzip : Compress using gzip (default if detected)" + echo " --pigz : Compress with pigz" + echo " --bzip2 : Compress using bzip2 instead of gzip" + echo " --pbzip2 : Compress using pbzip2 instead of gzip" + echo " --xz : Compress using xz instead of gzip" + echo " --lzo : Compress using lzop instead of gzip" + echo " --lz4 : Compress using lz4 instead of gzip" + echo " --compress : Compress using the UNIX 'compress' command" + echo " --complevel lvl : Compression level for gzip pigz xz lzo lz4 bzip2 and pbzip2 (default 9)" + echo " --base64 : Instead of compressing, encode the data using base64" + echo " --gpg-encrypt : Instead of compressing, encrypt the data using GPG" + echo " --gpg-asymmetric-encrypt-sign" + echo " : Instead of compressing, asymmetrically encrypt and sign the data using GPG" + echo " --gpg-extra opt : Append more options to the gpg command line" + echo " --ssl-encrypt : Instead of compressing, encrypt the data using OpenSSL" + echo " --nocomp : Do not compress the data" + echo " --notemp : The archive will create archive_dir in the" + echo " current directory and uncompress in ./archive_dir" + echo " --needroot : Check that the root user is extracting the archive before proceeding" + echo " --copy : Upon extraction, the archive will first copy itself to" + echo " a temporary directory" + echo " --append : Append more files to an existing Makeself archive" + echo " The label and startup scripts will then be ignored" + echo " --target dir : Extract directly to a target directory" + echo " directory path can be either absolute or relative" + echo " --nooverwrite : Do not extract the archive if the specified target directory exists" + echo " --current : Files will be extracted to the current directory" + echo " Both --current and --target imply --notemp" + echo " --tar-extra opt : Append more options to the tar command line" + echo " --untar-extra opt : Append more options to the during the extraction of the tar archive" + echo " --nomd5 : Don't calculate an MD5 for archive" + echo " --nocrc : Don't calculate a CRC for archive" + echo " --header file : Specify location of the header script" + echo " --follow : Follow the symlinks in the archive" + echo " --noprogress : Do not show the progress during the decompression" + echo " --nox11 : Disable automatic spawn of a xterm" + echo " --nowait : Do not wait for user input after executing embedded" + echo " program from an xterm" + echo " --lsm file : LSM file describing the package" + echo " --license file : Append a license file" + echo " --help-header file : Add a header to the archive's --help output" + echo " --packaging-date date" + echo " : Use provided string as the packaging date" + echo " instead of the current date." + echo + echo " --keep-umask : Keep the umask set to shell default, rather than overriding when executing self-extracting archive." + echo " --export-conf : Export configuration variables to startup_script" + echo + echo "Do not forget to give a fully qualified startup script name" + echo "(i.e. with a ./ prefix if inside the archive)." + exit 1 +} + +# Default settings +if type gzip 2>&1 > /dev/null; then + COMPRESS=gzip +else + COMPRESS=Unix +fi +COMPRESS_LEVEL=9 +KEEP=n +CURRENT=n +NOX11=n +NOWAIT=n +APPEND=n +TAR_QUIETLY=n +KEEP_UMASK=n +QUIET=n +NOPROGRESS=n +COPY=none +NEED_ROOT=n +TAR_ARGS=cvf +TAR_EXTRA="" +GPG_EXTRA="" +DU_ARGS=-ks +HEADER=`dirname "$0"`/makeself-header.sh +TARGETDIR="" +NOOVERWRITE=n +DATE=`LC_ALL=C date` +EXPORT_CONF=n + +# LSM file stuff +LSM_CMD="echo No LSM. >> \"\$archname\"" + +while true +do + case "$1" in + --version | -v) + echo Makeself version $MS_VERSION + exit 0 + ;; + --pbzip2) + COMPRESS=pbzip2 + shift + ;; + --bzip2) + COMPRESS=bzip2 + shift + ;; + --gzip) + COMPRESS=gzip + shift + ;; + --pigz) + COMPRESS=pigz + shift + ;; + --xz) + COMPRESS=xz + shift + ;; + --lzo) + COMPRESS=lzo + shift + ;; + --lz4) + COMPRESS=lz4 + shift + ;; + --compress) + COMPRESS=Unix + shift + ;; + --base64) + COMPRESS=base64 + shift + ;; + --gpg-encrypt) + COMPRESS=gpg + shift + ;; + --gpg-asymmetric-encrypt-sign) + COMPRESS=gpg-asymmetric + shift + ;; + --gpg-extra) + GPG_EXTRA="$2" + if ! shift 2; then MS_Help; exit 1; fi + ;; + --ssl-encrypt) + COMPRESS=openssl + shift + ;; + --nocomp) + COMPRESS=none + shift + ;; + --complevel) + COMPRESS_LEVEL="$2" + if ! shift 2; then MS_Help; exit 1; fi + ;; + --notemp) + KEEP=y + shift + ;; + --copy) + COPY=copy + shift + ;; + --current) + CURRENT=y + KEEP=y + shift + ;; + --tar-extra) + TAR_EXTRA="$2" + if ! shift 2; then MS_Help; exit 1; fi + ;; + --untar-extra) + UNTAR_EXTRA="$2" + if ! shift 2; then MS_Help; exit 1; fi + ;; + --target) + TARGETDIR="$2" + KEEP=y + if ! shift 2; then MS_Help; exit 1; fi + ;; + --nooverwrite) + NOOVERWRITE=y + shift + ;; + --needroot) + NEED_ROOT=y + shift + ;; + --header) + HEADER="$2" + if ! shift 2; then MS_Help; exit 1; fi + ;; + --license) + LICENSE=`cat $2` + if ! shift 2; then MS_Help; exit 1; fi + ;; + --follow) + TAR_ARGS=cvhf + DU_ARGS=-ksL + shift + ;; + --noprogress) + NOPROGRESS=y + shift + ;; + --nox11) + NOX11=y + shift + ;; + --nowait) + NOWAIT=y + shift + ;; + --nomd5) + NOMD5=y + shift + ;; + --nocrc) + NOCRC=y + shift + ;; + --append) + APPEND=y + shift + ;; + --lsm) + LSM_CMD="cat \"$2\" >> \"\$archname\"" + if ! shift 2; then MS_Help; exit 1; fi + ;; + --packaging-date) + DATE="$2" + if ! shift 2; then MS_Help; exit 1; fi + ;; + --help-header) + HELPHEADER=`sed -e "s/'/'\\\\\''/g" $2` + if ! shift 2; then MS_Help; exit 1; fi + [ -n "$HELPHEADER" ] && HELPHEADER="$HELPHEADER +" + ;; + --tar-quietly) + TAR_QUIETLY=y + shift + ;; + --keep-umask) + KEEP_UMASK=y + shift + ;; + --export-conf) + EXPORT_CONF=y + shift + ;; + -q | --quiet) + QUIET=y + shift + ;; + -h | --help) + MS_Usage + ;; + -*) + echo Unrecognized flag : "$1" + MS_Usage + ;; + *) + break + ;; + esac +done + +if test $# -lt 1; then + MS_Usage +else + if test -d "$1"; then + archdir="$1" + else + echo "Directory $1 does not exist." >&2 + exit 1 + fi +fi +archname="$2" + +if test "$QUIET" = "y" || test "$TAR_QUIETLY" = "y"; then + if test "$TAR_ARGS" = "cvf"; then + TAR_ARGS="cf" + elif test "$TAR_ARGS" = "cvhf";then + TAR_ARGS="chf" + fi +fi + +if test "$APPEND" = y; then + if test $# -lt 2; then + MS_Usage + fi + + # Gather the info from the original archive + OLDENV=`sh "$archname" --dumpconf` + if test $? -ne 0; then + echo "Unable to update archive: $archname" >&2 + exit 1 + else + eval "$OLDENV" + fi +else + if test "$KEEP" = n -a $# = 3; then + echo "ERROR: Making a temporary archive with no embedded command does not make sense!" >&2 + echo >&2 + MS_Usage + fi + # We don't want to create an absolute directory unless a target directory is defined + if test "$CURRENT" = y; then + archdirname="." + elif test x$TARGETDIR != x; then + archdirname="$TARGETDIR" + else + archdirname=`basename "$1"` + fi + + if test $# -lt 3; then + MS_Usage + fi + + LABEL="$3" + SCRIPT="$4" + test "x$SCRIPT" = x || shift 1 + shift 3 + SCRIPTARGS="$*" +fi + +if test "$KEEP" = n -a "$CURRENT" = y; then + echo "ERROR: It is A VERY DANGEROUS IDEA to try to combine --notemp and --current." >&2 + exit 1 +fi + +case $COMPRESS in +gzip) + GZIP_CMD="gzip -c$COMPRESS_LEVEL" + GUNZIP_CMD="gzip -cd" + ;; +pigz) + GZIP_CMD="pigz -$COMPRESS_LEVEL" + GUNZIP_CMD="gzip -cd" + ;; +pbzip2) + GZIP_CMD="pbzip2 -c$COMPRESS_LEVEL" + GUNZIP_CMD="bzip2 -d" + ;; +bzip2) + GZIP_CMD="bzip2 -$COMPRESS_LEVEL" + GUNZIP_CMD="bzip2 -d" + ;; +xz) + GZIP_CMD="xz -c$COMPRESS_LEVEL" + GUNZIP_CMD="xz -d" + ;; +lzo) + GZIP_CMD="lzop -c$COMPRESS_LEVEL" + GUNZIP_CMD="lzop -d" + ;; +lz4) + GZIP_CMD="lz4 -c$COMPRESS_LEVEL" + GUNZIP_CMD="lz4 -d" + ;; +base64) + GZIP_CMD="base64" + GUNZIP_CMD="base64 -d -i" + ;; +gpg) + GZIP_CMD="gpg $GPG_EXTRA -ac -z$COMPRESS_LEVEL" + GUNZIP_CMD="gpg -d" + ;; +gpg-asymmetric) + GZIP_CMD="gpg $GPG_EXTRA -z$COMPRESS_LEVEL -es" + GUNZIP_CMD="gpg --yes -d" + ;; +openssl) + GZIP_CMD="openssl aes-256-cbc -a -salt -md sha256" + GUNZIP_CMD="openssl aes-256-cbc -d -a -md sha256" + ;; +Unix) + GZIP_CMD="compress -cf" + GUNZIP_CMD="exec 2>&-; uncompress -c || test \\\$? -eq 2 || gzip -cd" + ;; +none) + GZIP_CMD="cat" + GUNZIP_CMD="cat" + ;; +esac + +tmpfile="${TMPDIR:=/tmp}/mkself$$" + +if test -f "$HEADER"; then + oldarchname="$archname" + archname="$tmpfile" + # Generate a fake header to count its lines + SKIP=0 + . "$HEADER" + SKIP=`cat "$tmpfile" |wc -l` + # Get rid of any spaces + SKIP=`expr $SKIP` + rm -f "$tmpfile" + if test "$QUIET" = "n";then + echo Header is $SKIP lines long >&2 + fi + + archname="$oldarchname" +else + echo "Unable to open header file: $HEADER" >&2 + exit 1 +fi + +if test "$QUIET" = "n";then + echo +fi + +if test "$APPEND" = n; then + if test -f "$archname"; then + echo "WARNING: Overwriting existing file: $archname" >&2 + fi +fi + +USIZE=`du $DU_ARGS "$archdir" | awk '{print $1}'` + +if test "." = "$archdirname"; then + if test "$KEEP" = n; then + archdirname="makeself-$$-`date +%Y%m%d%H%M%S`" + fi +fi + +test -d "$archdir" || { echo "Error: $archdir does not exist."; rm -f "$tmpfile"; exit 1; } +if test "$QUIET" = "n";then + echo About to compress $USIZE KB of data... + echo Adding files to archive named \"$archname\"... +fi +exec 3<> "$tmpfile" +( cd "$archdir" && ( tar $TAR_EXTRA -$TAR_ARGS - . | eval "$GZIP_CMD" >&3 ) ) || \ + { echo Aborting: archive directory not found or temporary file: "$tmpfile" could not be created.; exec 3>&-; rm -f "$tmpfile"; exit 1; } +exec 3>&- # try to close the archive + +fsize=`cat "$tmpfile" | wc -c | tr -d " "` + +# Compute the checksums + +md5sum=00000000000000000000000000000000 +crcsum=0000000000 + +if test "$NOCRC" = y; then + if test "$QUIET" = "n";then + echo "skipping crc at user request" + fi +else + crcsum=`cat "$tmpfile" | CMD_ENV=xpg4 cksum | sed -e 's/ /Z/' -e 's/ /Z/' | cut -dZ -f1` + if test "$QUIET" = "n";then + echo "CRC: $crcsum" + fi +fi + +if test "$NOMD5" = y; then + if test "$QUIET" = "n";then + echo "skipping md5sum at user request" + fi +else + # Try to locate a MD5 binary + OLD_PATH=$PATH + PATH=${GUESS_MD5_PATH:-"$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"} + MD5_ARG="" + MD5_PATH=`exec <&- 2>&-; which md5sum || command -v md5sum || type md5sum` + test -x "$MD5_PATH" || MD5_PATH=`exec <&- 2>&-; which md5 || command -v md5 || type md5` + test -x "$MD5_PATH" || MD5_PATH=`exec <&- 2>&-; which digest || command -v digest || type digest` + PATH=$OLD_PATH + if test -x "$MD5_PATH"; then + if test `basename ${MD5_PATH}`x = digestx; then + MD5_ARG="-a md5" + fi + md5sum=`cat "$tmpfile" | eval "$MD5_PATH $MD5_ARG" | cut -b-32`; + if test "$QUIET" = "n";then + echo "MD5: $md5sum" + fi + else + if test "$QUIET" = "n";then + echo "MD5: none, MD5 command not found" + fi + fi +fi + +if test "$APPEND" = y; then + mv "$archname" "$archname".bak || exit + + # Prepare entry for new archive + filesizes="$filesizes $fsize" + CRCsum="$CRCsum $crcsum" + MD5sum="$MD5sum $md5sum" + USIZE=`expr $USIZE + $OLDUSIZE` + # Generate the header + . "$HEADER" + # Append the original data + tail -n +$OLDSKIP "$archname".bak >> "$archname" + # Append the new data + cat "$tmpfile" >> "$archname" + + chmod +x "$archname" + rm -f "$archname".bak + if test "$QUIET" = "n";then + echo Self-extractable archive \"$archname\" successfully updated. + fi +else + filesizes="$fsize" + CRCsum="$crcsum" + MD5sum="$md5sum" + + # Generate the header + . "$HEADER" + + # Append the compressed tar data after the stub + if test "$QUIET" = "n";then + echo + fi + cat "$tmpfile" >> "$archname" + chmod +x "$archname" + if test "$QUIET" = "n";then + echo Self-extractable archive \"$archname\" successfully created. + fi +fi +rm -f "$tmpfile" diff --git a/packaging/makeself/post-installer.sh b/packaging/makeself/post-installer.sh new file mode 100755 index 000000000..38cc41ef7 --- /dev/null +++ b/packaging/makeself/post-installer.sh @@ -0,0 +1,11 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-3.0-or-later + +# This script is started using the shell of the system +# and executes our 'install-or-update.sh' script +# using the netdata supplied, statically linked BASH +# +# so, at 'install-or-update.sh' we are always sure +# we run under BASH v4. + +./bin/bash system/install-or-update.sh "${@}" diff --git a/packaging/makeself/run-all-jobs.sh b/packaging/makeself/run-all-jobs.sh new file mode 100755 index 000000000..f7507c2d2 --- /dev/null +++ b/packaging/makeself/run-all-jobs.sh @@ -0,0 +1,42 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +LC_ALL=C +umask 002 + +# be nice +renice 19 $$ >/dev/null 2>/dev/null + +# ----------------------------------------------------------------------------- +# prepare the environment for the jobs + +# installation directory +export NETDATA_INSTALL_PATH="${1-/opt/netdata}" + +# our source directory +export NETDATA_MAKESELF_PATH="$(dirname "${0}")" +if [ "${NETDATA_MAKESELF_PATH:0:1}" != "/" ] + then + export NETDATA_MAKESELF_PATH="$(pwd)/${NETDATA_MAKESELF_PATH}" +fi + +# netdata source directory +export NETDATA_SOURCE_PATH="${NETDATA_MAKESELF_PATH}/../.." + +# make sure ${NULL} is empty +export NULL= + +# ----------------------------------------------------------------------------- + +cd "${NETDATA_MAKESELF_PATH}" || exit 1 + +. ./functions.sh "${@}" || exit 1 + +for x in jobs/*.install.sh +do + progress "running ${x}" + "${x}" "${NETDATA_INSTALL_PATH}" +done + +echo >&2 "All jobs for static packaging done successfully." +exit 0 |