1 files changed, 77 insertions, 0 deletions
diff --git a/src/go/collectors/go.d.plugin/modules/dnsmasq_dhcp/testdata/dnsmasq.conf b/src/go/collectors/go.d.plugin/modules/dnsmasq_dhcp/testdata/dnsmasq.conf
new file mode 100644
index 000000000..4cf77478e
--- /dev/null
+++ b/src/go/collectors/go.d.plugin/modules/dnsmasq_dhcp/testdata/dnsmasq.conf
@@ -0,0 +1,77 @@
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+#dhcp-range=192.168.0.50,192.168.0.150,12h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
+
+# This is an example of a DHCP range which sets a tag, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=set:red,192.168.0.50,192.168.0.150
+
+# Use this DHCP range only when the tag "green" is set.
+#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h
+
+# Specify a subnet which can't be used for dynamic address allocation,
+# is available for hosts with matching --dhcp-host lines. Note that
+# dhcp-host declarations will be ignored unless there is a dhcp-range
+# of some type for the subnet in question.
+# In this case the netmask is implied (it comes from the network
+# configuration on the machine running dnsmasq) it is possible to give
+# an explicit netmask instead.
+#dhcp-range=192.168.0.0,static
+
+# Enable DHCPv6. Note that the prefix-length does not need to be specified
+# and defaults to 64 if missing/
+#dhcp-range=1234::2, 1234::500, 64, 12h
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+#dhcp-range=1234::, ra-only
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
+# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack
+# hosts. Use the DHCPv4 lease to derive the name, network segment and
+# MAC address and assume that the host will also have an
+# IPv6 address calculated using the SLAAC alogrithm.
+#dhcp-range=1234::, ra-names
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.)
+#dhcp-range=1234::, ra-only, 48h
+
+# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA
+# so that clients can use SLAAC addresses as well as DHCP ones.
+#dhcp-range=1234::2, 1234::500, slaac
+
+# Do Router Advertisements and stateless DHCP for this subnet. Clients will
+# not get addresses from DHCP, but they will get other configuration information.
+# They will use SLAAC for addresses.
+#dhcp-range=1234::, ra-stateless
+
+# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses
+# from DHCPv4 leases.
+#dhcp-range=1234::, ra-stateless, ra-names
+
+dhcp-range=192.168.0.1,192.168.0.100,12h
+dhcp-range = 1230::1, 1230::64
+
+dhcp-range = 1235::2, 1235::500, ra-stateless
+dhcp-range=1234::, ra-stateless, ra-names
+dhcp-range=1234::, ra-stateless
+dhcp-range=1234::, ra-only, 48h
+
+dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.99
+dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1230::63]
+
+conf-file=testdata/dnsmasq.conf
+conf-file=testdata/dnsmasq2.conf
+
+conf-dir=testdata/dnsmasq.d2
+conf-dir=testdata/dnsmasq.d3,.bak
+conf-dir=testdata/dnsmasq.d4,*.conf
+\ No newline at end of file