summaryrefslogtreecommitdiffstats
path: root/src/logsmanagement/defaults.h
diff options
context:
space:
mode:
Diffstat (limited to 'src/logsmanagement/defaults.h')
-rw-r--r--src/logsmanagement/defaults.h140
1 files changed, 0 insertions, 140 deletions
diff --git a/src/logsmanagement/defaults.h b/src/logsmanagement/defaults.h
deleted file mode 100644
index 2309f7810..000000000
--- a/src/logsmanagement/defaults.h
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-3.0-or-later
-
-/** @file defaults.h
- * @brief Hard-coded configuration settings for the Logs Management engine
- */
-
-#ifndef LOGSMANAG_DEFAULTS_H_
-#define LOGSMANAG_DEFAULTS_H_
-
-/* -------------------------------------------------------------------------- */
-/* General */
-/* -------------------------------------------------------------------------- */
-
-#define KiB * 1024ULL
-#define MiB * 1048576ULL
-#define GiB * 1073741824ULL
-
-#define MAX_LOG_MSG_SIZE 50 MiB /**< Maximum allowable log message size (in Bytes) to be stored in message queue and DB. **/
-
-#define MAX_CUS_CHARTS_PER_SOURCE 100 /**< Hard limit of maximum custom charts per log source **/
-
-#define MAX_OUTPUTS_PER_SOURCE 100 /**< Hard limit of maximum Fluent Bit outputs per log source **/
-
-#define UPDATE_TIMEOUT_DEFAULT 10 /**< Default timeout to use to update charts if they haven't been updated in the meantime. **/
-
-#if !defined(LOGS_MANAGEMENT_DEV_MODE)
-#define ENABLE_COLLECTED_LOGS_TOTAL_DEFAULT CONFIG_BOOLEAN_NO /**< Default value to enable (or not) metrics of total collected log records **/
-#else
-#define ENABLE_COLLECTED_LOGS_TOTAL_DEFAULT CONFIG_BOOLEAN_YES /**< Default value to enable (or not) metrics of total collected log records, if stress tests are enabled **/
-#endif
-#define ENABLE_COLLECTED_LOGS_RATE_DEFAULT CONFIG_BOOLEAN_YES /**< Default value to enable (or not) metrics of rate of collected log records **/
-
-#define SD_JOURNAL_FIELD_PREFIX "LOGS_MANAG_" /**< Default systemd journal field prefix for sources that log to the system journal */
-
-#define SD_JOURNAL_SEND_DEFAULT CONFIG_BOOLEAN_NO /**< Default value to enable (or not) submission of logs to the system journal (where applicable) **/
-
-#define LOGS_MANAG_CHARTNAME_SIZE 50 /**< Maximum size of log source chart names, including terminating '\0'. **/
-#define LOGS_MANAG_CHARTNAME_PREFIX "logs_manag_" /**< Prefix of top-level chart names, used also in function sources. **/
-
-/* -------------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------------- */
-/* Database */
-/* -------------------------------------------------------------------------- */
-
-typedef enum {
- LOGS_MANAG_DB_MODE_FULL = 0,
- LOGS_MANAG_DB_MODE_NONE
-} logs_manag_db_mode_t;
-
-#define SAVE_BLOB_TO_DB_DEFAULT 6 /**< Global default configuration interval to save buffers from RAM to disk **/
-#define SAVE_BLOB_TO_DB_MIN 2 /**< Minimum allowed interval to save buffers from RAM to disk **/
-#define SAVE_BLOB_TO_DB_MAX 1800 /**< Maximum allowed interval to save buffers from RAM to disk **/
-
-#define BLOB_MAX_FILES 10 /**< Maximum allowed number of BLOB files (per collection) that are used to store compressed logs. When exceeded, the olderst one will be overwritten. **/
-
-#define DISK_SPACE_LIMIT_DEFAULT 500 /**< Global default configuration maximum database disk space limit per log source **/
-
-#if !defined(LOGS_MANAGEMENT_DEV_MODE)
-#define GLOBAL_DB_MODE_DEFAULT_STR "none" /**< db mode string to be used as global default in configuration **/
-#define GLOBAL_DB_MODE_DEFAULT LOGS_MANAG_DB_MODE_NONE /**< db mode to be used as global default, matching GLOBAL_DB_MODE_DEFAULT_STR **/
-#else
-#define GLOBAL_DB_MODE_DEFAULT_STR "full" /**< db mode string to be used as global default in configuration, if stress tests are enabled **/
-#define GLOBAL_DB_MODE_DEFAULT LOGS_MANAG_DB_MODE_FULL /**< db mode to be used as global default, matching GLOBAL_DB_MODE_DEFAULT_STR, if stress tests are enabled **/
-#endif
-
-/* -------------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------------- */
-/* Circular Buffer */
-/* -------------------------------------------------------------------------- */
-
-#define CIRCULAR_BUFF_SPARE_ITEMS_DEFAULT 2 /**< Additional circular buffers items to give time to the db engine to save buffers to disk **/
-
-#define CIRCULAR_BUFF_DEFAULT_MAX_SIZE (64 MiB) /**< Default circular_buffer_max_size **/
-#define CIRCULAR_BUFF_MAX_SIZE_RANGE_MIN (1 MiB) /**< circular_buffer_max_size read from configuration cannot be smaller than this **/
-#define CIRCULAR_BUFF_MAX_SIZE_RANGE_MAX (4 GiB) /**< circular_buffer_max_size read from configuration cannot be larger than this **/
-
-#define CIRCULAR_BUFF_DEFAULT_DROP_LOGS 0 /**< Global default configuration value whether to drop logs if circular buffer is full **/
-
-#define CIRC_BUFF_PREP_WR_RETRY_AFTER_MS 1000 /**< If circ_buff_prepare_write() fails due to not enough space, how many millisecs to wait before retrying **/
-
-/* -------------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------------- */
-/* Compression */
-/* -------------------------------------------------------------------------- */
-
-#define COMPRESSION_ACCELERATION_DEFAULT 1 /**< Global default value for compression acceleration **/
-
-/* -------------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------------- */
-/* Kernel logs (kmsg) plugin */
-/* -------------------------------------------------------------------------- */
-
-#define KERNEL_LOGS_COLLECT_INIT_WAIT 5 /**< Wait time (in sec) before kernel log collection starts. Required in order to skip collection and processing of pre-existing logs at Netdata boot. **/
-
-/* -------------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------------- */
-/* Fluent Bit */
-/* -------------------------------------------------------------------------- */
-
-#define FLB_FLUSH_DEFAULT "0.1" /**< Default Fluent Bit flush interval **/
-#define FLB_HTTP_LISTEN_DEFAULT "0.0.0.0" /**< Default Fluent Bit server listening socket **/
-#define FLB_HTTP_PORT_DEFAULT "2020" /**< Default Fluent Bit server listening port **/
-#define FLB_HTTP_SERVER_DEFAULT "false" /**< Default Fluent Bit server enable status **/
-#define FLB_LOG_FILENAME_DEFAULT "fluentbit.log" /**< Default Fluent Bit log filename **/
-#define FLB_LOG_LEVEL_DEFAULT "info" /**< Default Fluent Bit log level **/
-#define FLB_CORO_STACK_SIZE_DEFAULT "24576" /**< Default Fluent Bit coro stack size - do not change this value unless there is a good reason **/
-
-#define FLB_FORWARD_UNIX_PATH_DEFAULT "" /**< Default path for Forward unix socket configuration, see also https://docs.fluentbit.io/manual/pipeline/inputs/forward#configuration-parameters **/
-#define FLB_FORWARD_UNIX_PERM_DEFAULT "0644" /**< Default permissions for Forward unix socket configuration, see also https://docs.fluentbit.io/manual/pipeline/inputs/forward#configuration-parameters **/
-#define FLB_FORWARD_ADDR_DEFAULT "0.0.0.0" /**< Default listen address for Forward socket configuration, see also https://docs.fluentbit.io/manual/pipeline/inputs/forward#configuration-parameters **/
-#define FLB_FORWARD_PORT_DEFAULT "24224" /**< Default listen port for Forward socket configuration, see also https://docs.fluentbit.io/manual/pipeline/inputs/forward#configuration-parameters **/
-
-/* -------------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------------- */
-/* Queries */
-/* -------------------------------------------------------------------------- */
-
-#define LOGS_MANAG_MAX_COMPOUND_QUERY_SOURCES 10U /**< Maximum allowed number of log sources that can be searched in a single query **/
-#define LOGS_MANAG_QUERY_QUOTA_DEFAULT (10 MiB) /**< Default logs management query quota **/
-#define LOGS_MANAG_QUERY_QUOTA_MAX MAX_LOG_MSG_SIZE /**< Max logs management query quota **/
-#define LOGS_MANAG_QUERY_IGNORE_CASE_DEFAULT 0 /**< Boolean to indicate whether to ignore case for keyword or not **/
-#define LOGS_MANAG_QUERY_SANITIZE_KEYWORD_DEFAULT 0 /**< Boolean to indicate whether to sanitize keyword or not **/
-#define LOGS_MANAG_QUERY_TIMEOUT_DEFAULT 30 /**< Default timeout of logs management queries (in secs) **/
-
-/* -------------------------------------------------------------------------- */
-
-
-#endif // LOGSMANAG_DEFAULTS_H_
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-15 04:22:23 +0000