From 517a443636daa1e8085cb4e5325524a54e8a8fd7 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Tue, 17 Oct 2023 11:30:23 +0200 Subject: Merging upstream version 1.43.0. Signed-off-by: Daniel Baumann --- collectors/charts.d.plugin/apcupsd/README.md | 27 +-- .../apcupsd/integrations/apc_ups.md | 193 +++++++++++++++++++++ collectors/charts.d.plugin/apcupsd/metadata.yaml | 3 + 3 files changed, 197 insertions(+), 26 deletions(-) mode change 100644 => 120000 collectors/charts.d.plugin/apcupsd/README.md create mode 100644 collectors/charts.d.plugin/apcupsd/integrations/apc_ups.md (limited to 'collectors/charts.d.plugin/apcupsd') diff --git a/collectors/charts.d.plugin/apcupsd/README.md b/collectors/charts.d.plugin/apcupsd/README.md deleted file mode 100644 index 00e9697dc..000000000 --- a/collectors/charts.d.plugin/apcupsd/README.md +++ /dev/null @@ -1,26 +0,0 @@ - - -# APC UPS collector - -Monitors different APC UPS models and retrieves status information using `apcaccess` tool. - -## Configuration - -If using [our official native DEB/RPM packages](https://github.com/netdata/netdata/blob/master/packaging/installer/methods/packages.md), make sure `netdata-plugin-chartsd` is installed. - -Edit the `charts.d/apcupsd.conf` configuration file using `edit-config` from the Netdata [config -directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md), which is typically at `/etc/netdata`. - -```bash -cd /etc/netdata # Replace this path with your Netdata config directory, if different -sudo ./edit-config charts.d/apcupsd.conf -``` - - diff --git a/collectors/charts.d.plugin/apcupsd/README.md b/collectors/charts.d.plugin/apcupsd/README.md new file mode 120000 index 000000000..fc6681fe6 --- /dev/null +++ b/collectors/charts.d.plugin/apcupsd/README.md @@ -0,0 +1 @@ +integrations/apc_ups.md \ No newline at end of file diff --git a/collectors/charts.d.plugin/apcupsd/integrations/apc_ups.md b/collectors/charts.d.plugin/apcupsd/integrations/apc_ups.md new file mode 100644 index 000000000..4d1f2edd6 --- /dev/null +++ b/collectors/charts.d.plugin/apcupsd/integrations/apc_ups.md @@ -0,0 +1,193 @@ + + +# APC UPS + + + + + +Plugin: charts.d.plugin +Module: apcupsd + + + +## Overview + +Monitor APC UPS performance with Netdata for optimal uninterruptible power supply operations. Enhance your power supply reliability with real-time APC UPS metrics. + +The collector uses the `apcaccess` tool to contact the `apcupsd` daemon and get the APC UPS statistics. + +This collector is supported on all platforms. + +This collector only supports collecting metrics from a single instance of this integration. + + +### Default Behavior + +#### Auto-Detection + +By default, with no configuration provided, the collector will try to contact 127.0.0.1:3551 with using the `apcaccess` utility. + +#### Limits + +The default configuration for this integration does not impose any limits on data collection. + +#### Performance Impact + +The default configuration for this integration is not expected to impose a significant performance impact on the system. + + +## Metrics + +Metrics grouped by *scope*. + +The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels. + + + +### Per ups + +Metrics related to UPS. Each UPS provides its own set of the following metrics. + +This scope has no labels. + +Metrics: + +| Metric | Dimensions | Unit | +|:------|:----------|:----| +| apcupsd.charge | charge | percentage | +| apcupsd.battery.voltage | voltage, nominal | Volts | +| apcupsd.input.voltage | voltage, min, max | Volts | +| apcupsd.output.voltage | absolute, nominal | Volts | +| apcupsd.input.frequency | frequency | Hz | +| apcupsd.load | load | percentage | +| apcupsd.load_usage | load | Watts | +| apcupsd.temperature | temp | Celsius | +| apcupsd.time | time | Minutes | +| apcupsd.online | online | boolean | + + + +## Alerts + + +The following alerts are available: + +| Alert name | On metric | Description | +|:------------|:----------|:------------| +| [ apcupsd_ups_charge ](https://github.com/netdata/netdata/blob/master/health/health.d/apcupsd.conf) | apcupsd.charge | average UPS charge over the last minute | +| [ apcupsd_10min_ups_load ](https://github.com/netdata/netdata/blob/master/health/health.d/apcupsd.conf) | apcupsd.load | average UPS load over the last 10 minutes | +| [ apcupsd_last_collected_secs ](https://github.com/netdata/netdata/blob/master/health/health.d/apcupsd.conf) | apcupsd.load | number of seconds since the last successful data collection | + + +## Setup + +### Prerequisites + +#### Install charts.d plugin + +If [using our official native DEB/RPM packages](https://github.com/netdata/netdata/blob/master/packaging/installer/UPDATE.md#determine-which-installation-method-you-used), make sure `netdata-plugin-chartsd` is installed. + + +#### Required software + +Make sure the `apcaccess` and `apcupsd` are installed and running. + + +### Configuration + +#### File + +The configuration file name for this integration is `charts.d/apcupsd.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config charts.d/apcupsd.conf +``` +#### Options + +The config file is sourced by the charts.d plugin. It's a standard bash file. + +The following collapsed table contains all the options that can be configured for the apcupsd collector. + + +
Config options + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| apcupsd_sources | This is an array of apcupsd sources. You can have multiple entries there. Please refer to the example below on how to set it. | 127.0.0.1:3551 | False | +| apcupsd_timeout | How long to wait for apcupsd to respond. | 3 | False | +| apcupsd_update_every | The data collection frequency. If unset, will inherit the netdata update frequency. | 1 | False | +| apcupsd_priority | The charts priority on the dashboard. | 90000 | False | +| apcupsd_retries | The number of retries to do in case of failure before disabling the collector. | 10 | False | + +
+ +#### Examples + +##### Multiple apcupsd sources + +Specify a multiple apcupsd sources along with a custom update interval + +```yaml +# add all your APC UPSes in this array - uncomment it too +declare -A apcupsd_sources=( + ["local"]="127.0.0.1:3551", + ["remote"]="1.2.3.4:3551" +) + +# how long to wait for apcupsd to respond +#apcupsd_timeout=3 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +apcupsd_update_every=5 + +# the charts priority on the dashboard +#apcupsd_priority=90000 + +# the number of retries to do in case of failure +# before disabling the module +#apcupsd_retries=10 + +``` + + +## Troubleshooting + +### Debug Mode + +To troubleshoot issues with the `apcupsd` collector, run the `charts.d.plugin` with the debug option enabled. The output +should give you clues as to why the collector isn't working. + +- Navigate to the `plugins.d` directory, usually at `/usr/libexec/netdata/plugins.d/`. If that's not the case on + your system, open `netdata.conf` and look for the `plugins` setting under `[directories]`. + + ```bash + cd /usr/libexec/netdata/plugins.d/ + ``` + +- Switch to the `netdata` user. + + ```bash + sudo -u netdata -s + ``` + +- Run the `charts.d.plugin` to debug the collector: + + ```bash + ./charts.d.plugin debug 1 apcupsd + ``` + + diff --git a/collectors/charts.d.plugin/apcupsd/metadata.yaml b/collectors/charts.d.plugin/apcupsd/metadata.yaml index d078074b7..07d56d48d 100644 --- a/collectors/charts.d.plugin/apcupsd/metadata.yaml +++ b/collectors/charts.d.plugin/apcupsd/metadata.yaml @@ -42,6 +42,9 @@ modules: setup: prerequisites: list: + - title: "Install charts.d plugin" + description: | + If [using our official native DEB/RPM packages](https://github.com/netdata/netdata/blob/master/packaging/installer/UPDATE.md#determine-which-installation-method-you-used), make sure `netdata-plugin-chartsd` is installed. - title: "Required software" description: "Make sure the `apcaccess` and `apcupsd` are installed and running." configuration: -- cgit v1.2.3