From 61d0027904ee9c040985b1642ca228737d616d03 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Tue, 21 May 2019 20:55:22 +0200 Subject: Adding upstream version 1.15.0. Signed-off-by: Daniel Baumann --- collectors/charts.d.plugin/Makefile.in | 960 -------------------------- collectors/charts.d.plugin/charts.d.plugin | 691 ------------------ collectors/charts.d.plugin/charts.d.plugin.in | 9 +- 3 files changed, 8 insertions(+), 1652 deletions(-) delete mode 100644 collectors/charts.d.plugin/Makefile.in delete mode 100644 collectors/charts.d.plugin/charts.d.plugin (limited to 'collectors/charts.d.plugin') diff --git a/collectors/charts.d.plugin/Makefile.in b/collectors/charts.d.plugin/Makefile.in deleted file mode 100644 index 99b331b58..000000000 --- a/collectors/charts.d.plugin/Makefile.in +++ /dev/null @@ -1,960 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# SPDX-License-Identifier: GPL-3.0-or-later - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -DIST_COMMON = $(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc \ - $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc \ - $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc \ - $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc \ - $(srcdir)/hddtemp/Makefile.inc \ - $(srcdir)/libreswan/Makefile.inc \ - $(srcdir)/load_average/Makefile.inc \ - $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc \ - $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc \ - $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc \ - $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc \ - $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc \ - $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(dist_charts_SCRIPTS) $(dist_plugins_SCRIPTS) \ - $(dist_charts_DATA) $(dist_chartsconfig_DATA) \ - $(dist_libconfig_DATA) $(dist_noinst_DATA) \ - $(dist_userchartsconfig_DATA) -subdir = collectors/charts.d.plugin -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \ - $(top_srcdir)/build/m4/ax_c__generic.m4 \ - $(top_srcdir)/build/m4/ax_c_lto.m4 \ - $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \ - $(top_srcdir)/build/m4/ax_c_mallopt.m4 \ - $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \ - $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \ - $(top_srcdir)/build/m4/ax_pthread.m4 \ - $(top_srcdir)/build/m4/jemalloc.m4 \ - $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" \ - "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" \ - "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)" -SCRIPTS = $(dist_charts_SCRIPTS) $(dist_plugins_SCRIPTS) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -DATA = $(dist_charts_DATA) $(dist_chartsconfig_DATA) \ - $(dist_libconfig_DATA) $(dist_noinst_DATA) \ - $(dist_userchartsconfig_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CUPSCONFIG = @CUPSCONFIG@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@ -IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@ -LDFLAGS = @LDFLAGS@ -LIBCAP_CFLAGS = @LIBCAP_CFLAGS@ -LIBCAP_LIBS = @LIBCAP_LIBS@ -LIBMNL_CFLAGS = @LIBMNL_CFLAGS@ -LIBMNL_LIBS = @LIBMNL_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MATH_CFLAGS = @MATH_CFLAGS@ -MATH_LIBS = @MATH_LIBS@ -MKDIR_P = @MKDIR_P@ -NFACCT_CFLAGS = @NFACCT_CFLAGS@ -NFACCT_LIBS = @NFACCT_LIBS@ -OBJEXT = @OBJEXT@ -OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@ -OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@ -OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@ -OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@ -OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@ -OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@ -OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@ -OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@ -OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@ -OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@ -OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@ -OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@ -OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@ -OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@ -OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@ -OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -PTHREAD_CC = @PTHREAD_CC@ -PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ -PTHREAD_LIBS = @PTHREAD_LIBS@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SSE_CANDIDATE = @SSE_CANDIDATE@ -STRIP = @STRIP@ -UUID_CFLAGS = @UUID_CFLAGS@ -UUID_LIBS = @UUID_LIBS@ -VERSION = @VERSION@ -XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@ -XENLIGHT_LIBS = @XENLIGHT_LIBS@ -YAJL_CFLAGS = @YAJL_CFLAGS@ -YAJL_LIBS = @YAJL_LIBS@ -ZLIB_CFLAGS = @ZLIB_CFLAGS@ -ZLIB_LIBS = @ZLIB_LIBS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -ax_pthread_config = @ax_pthread_config@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_target = @build_target@ -build_vendor = @build_vendor@ -builddir = @builddir@ -cachedir = @cachedir@ -chartsdir = @chartsdir@ -configdir = @configdir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -has_jemalloc = @has_jemalloc@ -has_tcmalloc = @has_tcmalloc@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libconfigdir = @libconfigdir@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -logdir = @logdir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -nodedir = @nodedir@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -pluginsdir = @pluginsdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -pythondir = @pythondir@ -registrydir = @registrydir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -varlibdir = @varlibdir@ -webdir = @webdir@ -MAINTAINERCLEANFILES = $(srcdir)/Makefile.in -CLEANFILES = \ - charts.d.plugin \ - $(NULL) - -SUFFIXES = .in -dist_libconfig_DATA = \ - charts.d.conf \ - $(NULL) - -dist_plugins_SCRIPTS = \ - charts.d.dryrun-helper.sh \ - charts.d.plugin \ - loopsleepms.sh.inc \ - $(NULL) - - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution - -# do not install these files, but include them in the distribution -dist_noinst_DATA = charts.d.plugin.in README.md $(NULL) ap/README.md \ - ap/Makefile.inc apache/README.md apache/Makefile.inc \ - apcupsd/README.md apcupsd/Makefile.inc cpu_apps/README.md \ - cpu_apps/Makefile.inc cpufreq/README.md cpufreq/Makefile.inc \ - example/README.md example/Makefile.inc exim/README.md \ - exim/Makefile.inc hddtemp/README.md hddtemp/Makefile.inc \ - libreswan/README.md libreswan/Makefile.inc \ - load_average/README.md load_average/Makefile.inc \ - mem_apps/README.md mem_apps/Makefile.inc mysql/README.md \ - mysql/Makefile.inc nginx/README.md nginx/Makefile.inc \ - nut/README.md nut/Makefile.inc opensips/README.md \ - opensips/Makefile.inc phpfpm/README.md phpfpm/Makefile.inc \ - postfix/README.md postfix/Makefile.inc sensors/README.md \ - sensors/Makefile.inc squid/README.md squid/Makefile.inc \ - tomcat/README.md tomcat/Makefile.inc -dist_charts_SCRIPTS = \ - $(NULL) - - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files - -# install these files -dist_charts_DATA = $(NULL) ap/ap.chart.sh apache/apache.chart.sh \ - apcupsd/apcupsd.chart.sh cpu_apps/cpu_apps.chart.sh \ - cpufreq/cpufreq.chart.sh example/example.chart.sh \ - exim/exim.chart.sh hddtemp/hddtemp.chart.sh \ - libreswan/libreswan.chart.sh \ - load_average/load_average.chart.sh mem_apps/mem_apps.chart.sh \ - mysql/mysql.chart.sh nginx/nginx.chart.sh nut/nut.chart.sh \ - opensips/opensips.chart.sh phpfpm/phpfpm.chart.sh \ - postfix/postfix.chart.sh sensors/sensors.chart.sh \ - squid/squid.chart.sh tomcat/tomcat.chart.sh -userchartsconfigdir = $(configdir)/charts.d -dist_userchartsconfig_DATA = \ - .keep \ - $(NULL) - -chartsconfigdir = $(libconfigdir)/charts.d -dist_chartsconfig_DATA = $(NULL) ap/ap.conf apache/apache.conf \ - apcupsd/apcupsd.conf cpu_apps/cpu_apps.conf \ - cpufreq/cpufreq.conf example/example.conf exim/exim.conf \ - hddtemp/hddtemp.conf libreswan/libreswan.conf \ - load_average/load_average.conf mem_apps/mem_apps.conf \ - mysql/mysql.conf nginx/nginx.conf nut/nut.conf \ - opensips/opensips.conf phpfpm/phpfpm.conf postfix/postfix.conf \ - sensors/sensors.conf squid/squid.conf tomcat/tomcat.conf -all: all-am - -.SUFFIXES: -.SUFFIXES: .in -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; -$(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc: - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-dist_chartsSCRIPTS: $(dist_charts_SCRIPTS) - @$(NORMAL_INSTALL) - @list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n' \ - -e 'h;s|.*|.|' \ - -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) { files[d] = files[d] " " $$1; \ - if (++n[d] == $(am__install_max)) { \ - print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ - else { print "f", d "/" $$4, $$1 } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(chartsdir)$$dir'"; \ - $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(chartsdir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-dist_chartsSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || exit 0; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 's,.*/,,;$(transform)'`; \ - dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir) -install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS) - @$(NORMAL_INSTALL) - @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n' \ - -e 'h;s|.*|.|' \ - -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) { files[d] = files[d] " " $$1; \ - if (++n[d] == $(am__install_max)) { \ - print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ - else { print "f", d "/" $$4, $$1 } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \ - $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-dist_pluginsSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 's,.*/,,;$(transform)'`; \ - dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) -install-dist_chartsDATA: $(dist_charts_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsdir)" || exit $$?; \ - done - -uninstall-dist_chartsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir) -install-dist_chartsconfigDATA: $(dist_chartsconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(chartsconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(chartsconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsconfigdir)" || exit $$?; \ - done - -uninstall-dist_chartsconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(chartsconfigdir)'; $(am__uninstall_files_from_dir) -install-dist_libconfigDATA: $(dist_libconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \ - done - -uninstall-dist_libconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir) -install-dist_userchartsconfigDATA: $(dist_userchartsconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(userchartsconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(userchartsconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userchartsconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(userchartsconfigdir)" || exit $$?; \ - done - -uninstall-dist_userchartsconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(userchartsconfigdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(SCRIPTS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_chartsDATA install-dist_chartsSCRIPTS \ - install-dist_chartsconfigDATA install-dist_libconfigDATA \ - install-dist_pluginsSCRIPTS install-dist_userchartsconfigDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \ - uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \ - uninstall-dist_pluginsSCRIPTS \ - uninstall-dist_userchartsconfigDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ - ctags-am distclean distclean-generic distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dist_chartsDATA \ - install-dist_chartsSCRIPTS install-dist_chartsconfigDATA \ - install-dist_libconfigDATA install-dist_pluginsSCRIPTS \ - install-dist_userchartsconfigDATA install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ - pdf-am ps ps-am tags-am uninstall uninstall-am \ - uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \ - uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \ - uninstall-dist_pluginsSCRIPTS \ - uninstall-dist_userchartsconfigDATA - -.in: - if sed \ - -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \ - -e 's#[@]sbindir_POST@#$(sbindir)#g' \ - -e 's#[@]configdir_POST@#$(configdir)#g' \ - -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \ - -e 's#[@]cachedir_POST@#$(cachedir)#g' \ - -e 's#[@]registrydir_POST@#$(registrydir)#g' \ - -e 's#[@]varlibdir_POST@#$(varlibdir)#g' \ - $< > $@.tmp; then \ - mv "$@.tmp" "$@"; \ - else \ - rm -f "$@.tmp"; \ - false; \ - fi - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/collectors/charts.d.plugin/charts.d.plugin b/collectors/charts.d.plugin/charts.d.plugin deleted file mode 100644 index a2423bbcd..000000000 --- a/collectors/charts.d.plugin/charts.d.plugin +++ /dev/null @@ -1,691 +0,0 @@ -#!/usr/bin/env bash -# SPDX-License-Identifier: GPL-3.0-or-later - -# netdata -# real-time performance and health monitoring, done right! -# (C) 2017 Costa Tsaousis -# GPL v3+ -# -# charts.d.plugin allows easy development of BASH plugins -# -# if you need to run parallel charts.d processes, link this file to a different name -# in the same directory, with a .plugin suffix and netdata will start both of them, -# each will have a different config file and modules configuration directory. -# - -export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin" - -PROGRAM_FILE="$0" -PROGRAM_NAME="$(basename $0)" -PROGRAM_NAME="${PROGRAM_NAME/.plugin/}" -MODULE_NAME="main" - -# ----------------------------------------------------------------------------- -# create temp dir - -debug=0 -TMP_DIR= -chartsd_cleanup() { - trap '' EXIT QUIT HUP INT TERM - - if [ ! -z "$TMP_DIR" -a -d "$TMP_DIR" ]; then - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: cleaning up temporary directory $TMP_DIR ..." - rm -rf "$TMP_DIR" - fi - exit 0 -} -trap chartsd_cleanup EXIT QUIT HUP INT TERM - -if [ $UID = "0" ]; then - TMP_DIR="$(mktemp -d /var/run/netdata-${PROGRAM_NAME}-XXXXXXXXXX)" -else - TMP_DIR="$(mktemp -d /tmp/.netdata-${PROGRAM_NAME}-XXXXXXXXXX)" -fi - -logdate() { - date "+%Y-%m-%d %H:%M:%S" -} - -log() { - local status="${1}" - shift - - echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: ${*}" - -} - -warning() { - log WARNING "${@}" -} - -error() { - log ERROR "${@}" -} - -info() { - log INFO "${@}" -} - -fatal() { - log FATAL "${@}" - echo "DISABLE" - exit 1 -} - -debug() { - [ $debug -eq 1 ] && log DEBUG "${@}" -} - -# ----------------------------------------------------------------------------- -# check a few commands - -require_cmd() { - local x=$(which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null) - if [ -z "${x}" -o ! -x "${x}" ]; then - warning "command '${1}' is not found in ${PATH}." - eval "${1^^}_CMD=\"\"" - return 1 - fi - - eval "${1^^}_CMD=\"${x}\"" - return 0 -} - -require_cmd date || exit 1 -require_cmd sed || exit 1 -require_cmd basename || exit 1 -require_cmd dirname || exit 1 -require_cmd cat || exit 1 -require_cmd grep || exit 1 -require_cmd egrep || exit 1 -require_cmd mktemp || exit 1 -require_cmd awk || exit 1 -require_cmd timeout || exit 1 -require_cmd curl || exit 1 - -# ----------------------------------------------------------------------------- - -[ $((BASH_VERSINFO[0])) -lt 4 ] && fatal "BASH version 4 or later is required, but found version: ${BASH_VERSION}. Please upgrade." - -info "started from '$PROGRAM_FILE' with options: $*" - -# ----------------------------------------------------------------------------- -# internal defaults -# netdata exposes a few environment variables for us - -[ -z "${NETDATA_PLUGINS_DIR}" ] && NETDATA_PLUGINS_DIR="$(dirname "${0}")" -[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="/etc/netdata" -[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="/usr/lib/netdata/conf.d" - -pluginsd="${NETDATA_PLUGINS_DIR}" -stockconfd="${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}" -userconfd="${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}" -olduserconfd="${NETDATA_USER_CONFIG_DIR}" -chartsd="$pluginsd/../charts.d" - -minimum_update_frequency="${NETDATA_UPDATE_EVERY-1}" -update_every=${minimum_update_frequency} # this will be overwritten by the command line - -# work around for non BASH shells -charts_create="_create" -charts_update="_update" -charts_check="_check" -charts_undescore="_" - -# when making iterations, charts.d can loop more frequently -# to prevent plugins missing iterations. -# this is a percentage relative to update_every to align its -# iterations. -# The minimum is 10%, the maximum 100%. -# So, if update_every is 1 second and time_divisor is 50, -# charts.d will iterate every 500ms. -# Charts will be called to collect data only if the time -# passed since the last time the collected data is equal or -# above their update_every. -time_divisor=50 - -# number of seconds to run without restart -# after this time, charts.d.plugin will exit -# netdata will restart it -restart_timeout=$((3600 * 4)) - -# check if the charts.d plugins are using global variables -# they should not. -# It does not currently support BASH v4 arrays, so it is -# disabled -dryrunner=0 - -# check for timeout command -check_for_timeout=1 - -# the default enable/disable value for all charts -enable_all_charts="yes" - -# ----------------------------------------------------------------------------- -# parse parameters - -check=0 -chart_only= -while [ ! -z "$1" ]; do - if [ "$1" = "check" ]; then - check=1 - shift - continue - fi - - if [ "$1" = "debug" -o "$1" = "all" ]; then - debug=1 - shift - continue - fi - - if [ -f "$chartsd/$1.chart.sh" ]; then - debug=1 - chart_only="$(echo $1.chart.sh | sed "s/\.chart\.sh$//g")" - shift - continue - fi - - if [ -f "$chartsd/$1" ]; then - debug=1 - chart_only="$(echo $1 | sed "s/\.chart\.sh$//g")" - shift - continue - fi - - # number check - n="$1" - x=$((n)) - if [ "$x" = "$n" ]; then - shift - update_every=$x - [ $update_every -lt $minimum_update_frequency ] && update_every=$minimum_update_frequency - continue - fi - - fatal "Cannot understand parameter $1. Aborting." -done - -# ----------------------------------------------------------------------------- -# loop control - -# default sleep function -LOOPSLEEPMS_HIGHRES=0 -now_ms= -current_time_ms_default() { - now_ms="$(date +'%s')000" -} -current_time_ms="current_time_ms_default" -current_time_ms_accuracy=1 -mysleep="sleep" - -# if found and included, this file overwrites loopsleepms() -# and current_time_ms() with a high resolution timer function -# for precise looping. -source "$pluginsd/loopsleepms.sh.inc" -[ $? -ne 0 ] && error "Failed to load '$pluginsd/loopsleepms.sh.inc'." - -# ----------------------------------------------------------------------------- -# load my configuration - -for myconfig in "${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}.conf" "${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf"; do - if [ -f "$myconfig" ]; then - source "$myconfig" - if [ $? -ne 0 ]; then - error "Config file '$myconfig' loaded with errors." - else - info "Configuration file '$myconfig' loaded." - fi - else - warning "Configuration file '$myconfig' not found." - fi -done - -# make sure time_divisor is right -time_divisor=$((time_divisor)) -[ $time_divisor -lt 10 ] && time_divisor=10 -[ $time_divisor -gt 100 ] && time_divisor=100 - -# we check for the timeout command, after we load our -# configuration, so that the user may overwrite the -# timeout command we use, providing a function that -# can emulate the timeout command we need: -# > timeout SECONDS command ... -if [ $check_for_timeout -eq 1 ]; then - require_cmd timeout || exit 1 -fi - -# ----------------------------------------------------------------------------- -# internal checks - -# netdata passes the requested update frequency as the first argument -update_every=$((update_every + 1 - 1)) # makes sure it is a number -test $update_every -eq 0 && update_every=1 # if it is zero, make it 1 - -# check the charts.d directory -[ ! -d "$chartsd" ] && fatal "cannot find charts directory '$chartsd'" - -# ----------------------------------------------------------------------------- -# library functions - -fixid() { - echo "$*" | - tr -c "[A-Z][a-z][0-9]" "_" | - sed -e "s|^_\+||g" -e "s|_\+$||g" -e "s|_\+|_|g" | - tr "[A-Z]" "[a-z]" -} - -run() { - local ret pid="${BASHPID}" t - - if [ "z${1}" = "z-t" -a "${2}" != "0" ]; then - t="${2}" - shift 2 - timeout ${t} "${@}" 2>"${TMP_DIR}/run.${pid}" - ret=$? - else - "${@}" 2>"${TMP_DIR}/run.${pid}" - ret=$? - fi - - if [ ${ret} -ne 0 ]; then - { - printf "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: command '" - printf "%q " "${@}" - printf "' failed with code ${ret}:\n --- BEGIN TRACE ---\n" - cat "${TMP_DIR}/run.${pid}" - printf " --- END TRACE ---\n" - } >&2 - fi - rm "${TMP_DIR}/run.${pid}" - - return ${ret} -} - -# convert any floating point number -# to integer, give a multiplier -# the result is stored in ${FLOAT2INT_RESULT} -# so that no fork is necessary -# the multiplier must be a power of 10 -float2int() { - local f m="$2" a b l v=($1) - f=${v[0]} - - # the length of the multiplier - 1 - l=$((${#m} - 1)) - - # check if the number is in scientific notation - if [[ ${f} =~ ^[[:space:]]*(-)?[0-9.]+(e|E)(\+|-)[0-9]+ ]]; then - # convert it to decimal - # unfortunately, this fork cannot be avoided - # if you know of a way to avoid it, please let me know - f=$(printf "%0.${l}f" ${f}) - fi - - # split the floating point number - # in integer (a) and decimal (b) - a=${f/.*/} - b=${f/*./} - - # if the integer part is missing - # set it to zero - [ -z "${a}" ] && a="0" - - # strip leading zeros from the integer part - # base 10 convertion - a=$((10#$a)) - - # check the length of the decimal part - # against the length of the multiplier - if [ ${#b} -gt ${l} ]; then - # too many digits - take the most significant - b=${b:0:l} - - elif [ ${#b} -lt ${l} ]; then - # too few digits - pad with zero on the right - local z="00000000000000000000000" r=$((l - ${#b})) - b="${b}${z:0:r}" - fi - - # strip leading zeros from the decimal part - # base 10 convertion - b=$((10#$b)) - - # store the result - FLOAT2INT_RESULT=$(((a * m) + b)) -} - -# ----------------------------------------------------------------------------- -# charts check functions - -all_charts() { - cd "$chartsd" - [ $? -ne 0 ] && error "cannot cd to $chartsd" && return 1 - - ls *.chart.sh | sed "s/\.chart\.sh$//g" -} - -declare -A charts_enable_keyword=( - ['apache']="force" - ['cpu_apps']="force" - ['cpufreq']="force" - ['example']="force" - ['exim']="force" - ['hddtemp']="force" - ['load_average']="force" - ['mem_apps']="force" - ['mysql']="force" - ['nginx']="force" - ['phpfpm']="force" - ['postfix']="force" - ['sensors']="force" - ['squid']="force" - ['tomcat']="force" -) - -all_enabled_charts() { - local charts= enabled= required= - - # find all enabled charts - - for chart in $(all_charts); do - MODULE_NAME="${chart}" - - eval "enabled=\$$chart" - if [ -z "${enabled}" ]; then - enabled="${enable_all_charts}" - fi - - required="${charts_enable_keyword[${chart}]}" - [ -z "${required}" ] && required="yes" - - if [ ! "${enabled}" = "${required}" ]; then - info "is disabled. Add a line with $chart=$required in '${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf' to enable it (or remove the line that disables it)." - else - debug "is enabled for auto-detection." - local charts="$charts $chart" - fi - done - MODULE_NAME="main" - - local charts2= - for chart in $charts; do - MODULE_NAME="${chart}" - - # check the enabled charts - local check="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_check()")" - if [ -z "$check" ]; then - error "module '$chart' does not seem to have a $chart$charts_check() function. Disabling it." - continue - fi - - local create="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_create()")" - if [ -z "$create" ]; then - error "module '$chart' does not seem to have a $chart$charts_create() function. Disabling it." - continue - fi - - local update="$(cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_update()")" - if [ -z "$update" ]; then - error "module '$chart' does not seem to have a $chart$charts_update() function. Disabling it." - continue - fi - - # check its config - #if [ -f "$userconfd/$chart.conf" ] - #then - # if [ ! -z "$( cat "$userconfd/$chart.conf" | sed "s/^ \+//g" | grep -v "^$" | grep -v "^#" | grep -v "^$chart$charts_undescore" )" ] - # then - # error "module's $chart config $userconfd/$chart.conf should only have lines starting with $chart$charts_undescore . Disabling it." - # continue - # fi - #fi - - #if [ $dryrunner -eq 1 ] - # then - # "$pluginsd/charts.d.dryrun-helper.sh" "$chart" "$chartsd/$chart.chart.sh" "$userconfd/$chart.conf" >/dev/null - # if [ $? -ne 0 ] - # then - # error "module's $chart did not pass the dry run check. This means it uses global variables not starting with $chart. Disabling it." - # continue - # fi - #fi - - local charts2="$charts2 $chart" - done - MODULE_NAME="main" - - echo $charts2 - debug "enabled charts: $charts2" -} - -# ----------------------------------------------------------------------------- -# load the charts - -suffix_retries="_retries" -suffix_update_every="_update_every" -active_charts= -for chart in $(all_enabled_charts); do - MODULE_NAME="${chart}" - - debug "loading module: '$chartsd/$chart.chart.sh'" - - source "$chartsd/$chart.chart.sh" - [ $? -ne 0 ] && warning "Module '$chartsd/$chart.chart.sh' loaded with errors." - - # first load the stock config - if [ -f "$stockconfd/$chart.conf" ]; then - debug "loading module configuration: '$stockconfd/$chart.conf'" - source "$stockconfd/$chart.conf" - [ $? -ne 0 ] && warning "Config file '$stockconfd/$chart.conf' loaded with errors." - else - debug "not found module configuration: '$stockconfd/$chart.conf'" - fi - - # then load the user config (it overwrites the stock) - if [ -f "$userconfd/$chart.conf" ]; then - debug "loading module configuration: '$userconfd/$chart.conf'" - source "$userconfd/$chart.conf" - [ $? -ne 0 ] && warning "Config file '$userconfd/$chart.conf' loaded with errors." - else - debug "not found module configuration: '$userconfd/$chart.conf'" - - if [ -f "$olduserconfd/$chart.conf" ]; then - # support for very old netdata that had the charts.d module configs in /etc/netdata - info "loading module configuration from obsolete location: '$olduserconfd/$chart.conf'" - source "$olduserconfd/$chart.conf" - [ $? -ne 0 ] && warning "Config file '$olduserconfd/$chart.conf' loaded with errors." - fi - fi - - eval "dt=\$$chart$suffix_update_every" - dt=$((dt + 1 - 1)) # make sure it is a number - if [ $dt -lt $update_every ]; then - eval "$chart$suffix_update_every=$update_every" - fi - - $chart$charts_check - if [ $? -eq 0 ]; then - debug "module '$chart' activated" - active_charts="$active_charts $chart" - else - error "module's '$chart' check() function reports failure." - fi -done -MODULE_NAME="main" -debug "activated modules: $active_charts" - -# ----------------------------------------------------------------------------- -# check overwrites - -# enable work time reporting -debug_time= -test $debug -eq 1 && debug_time=tellwork - -# if we only need a specific chart, remove all the others -if [ ! -z "${chart_only}" ]; then - debug "requested to run only for: '${chart_only}'" - check_charts= - for chart in $active_charts; do - if [ "$chart" = "$chart_only" ]; then - check_charts="$chart" - break - fi - done - active_charts="$check_charts" -fi -debug "activated charts: $active_charts" - -# stop if we just need a pre-check -if [ $check -eq 1 ]; then - info "CHECK RESULT" - info "Will run the charts: $active_charts" - exit 0 -fi - -# ----------------------------------------------------------------------------- - -cd "${TMP_DIR}" || exit 1 - -# ----------------------------------------------------------------------------- -# create charts - -run_charts= -for chart in $active_charts; do - MODULE_NAME="${chart}" - - debug "calling '$chart$charts_create()'..." - $chart$charts_create - if [ $? -eq 0 ]; then - run_charts="$run_charts $chart" - debug "'$chart' initialized." - else - error "module's '$chart' function '$chart$charts_create()' reports failure." - fi -done -MODULE_NAME="main" -debug "run_charts='$run_charts'" - -# ----------------------------------------------------------------------------- -# update dimensions - -[ -z "$run_charts" ] && fatal "No charts to collect data from." - -declare -A charts_last_update=() charts_update_every=() charts_retries=() charts_next_update=() charts_run_counter=() charts_serial_failures=() -global_update() { - local exit_at \ - c=0 dt ret last_ms exec_start_ms exec_end_ms \ - chart now_charts=() next_charts=($run_charts) \ - next_ms x seconds millis - - # return the current time in ms in $now_ms - ${current_time_ms} - - exit_at=$((now_ms + (restart_timeout * 1000))) - - for chart in $run_charts; do - eval "charts_update_every[$chart]=\$$chart$suffix_update_every" - test -z "${charts_update_every[$chart]}" && charts_update_every[$chart]=$update_every - - eval "charts_retries[$chart]=\$$chart$suffix_retries" - test -z "${charts_retries[$chart]}" && charts_retries[$chart]=10 - - charts_last_update[$chart]=$((now_ms - (now_ms % (charts_update_every[$chart] * 1000)))) - charts_next_update[$chart]=$((charts_last_update[$chart] + (charts_update_every[$chart] * 1000))) - charts_run_counter[$chart]=0 - charts_serial_failures[$chart]=0 - - echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}" - echo "DIMENSION run_time 'run time' absolute 1 1" - done - - # the main loop - while [ "${#next_charts[@]}" -gt 0 ]; do - c=$((c + 1)) - now_charts=("${next_charts[@]}") - next_charts=() - - # return the current time in ms in $now_ms - ${current_time_ms} - - for chart in "${now_charts[@]}"; do - MODULE_NAME="${chart}" - - if [ ${now_ms} -ge ${charts_next_update[$chart]} ]; then - last_ms=${charts_last_update[$chart]} - dt=$((now_ms - last_ms)) - - charts_last_update[$chart]=${now_ms} - - while [ ${charts_next_update[$chart]} -lt ${now_ms} ]; do - charts_next_update[$chart]=$((charts_next_update[$chart] + (charts_update_every[$chart] * 1000))) - done - - # the first call should not give a duration - # so that netdata calibrates to current time - dt=$((dt * 1000)) - charts_run_counter[$chart]=$((charts_run_counter[$chart] + 1)) - if [ ${charts_run_counter[$chart]} -eq 1 ]; then - dt= - fi - - exec_start_ms=$now_ms - $chart$charts_update $dt - ret=$? - - # return the current time in ms in $now_ms - ${current_time_ms} - exec_end_ms=$now_ms - - echo "BEGIN netdata.plugin_chartsd_$chart $dt" - echo "SET run_time = $((exec_end_ms - exec_start_ms))" - echo "END" - - if [ $ret -eq 0 ]; then - charts_serial_failures[$chart]=0 - next_charts+=($chart) - else - charts_serial_failures[$chart]=$((charts_serial_failures[$chart] + 1)) - - if [ ${charts_serial_failures[$chart]} -gt ${charts_retries[$chart]} ]; then - error "module's '$chart' update() function reported failure ${charts_serial_failures[$chart]} times. Disabling it." - else - error "module's '$chart' update() function reports failure. Will keep trying for a while." - next_charts+=($chart) - fi - fi - else - next_charts+=($chart) - fi - done - MODULE_NAME="${chart}" - - # wait the time you are required to - next_ms=$((now_ms + (update_every * 1000 * 100))) - for x in "${charts_next_update[@]}"; do [ ${x} -lt ${next_ms} ] && next_ms=${x}; done - next_ms=$((next_ms - now_ms)) - - if [ ${LOOPSLEEPMS_HIGHRES} -eq 1 -a ${next_ms} -gt 0 ]; then - next_ms=$((next_ms + current_time_ms_accuracy)) - seconds=$((next_ms / 1000)) - millis=$((next_ms % 1000)) - if [ ${millis} -lt 10 ]; then - millis="00${millis}" - elif [ ${millis} -lt 100 ]; then - millis="0${millis}" - fi - - debug "sleeping for ${seconds}.${millis} seconds." - ${mysleep} ${seconds}.${millis} - else - debug "sleeping for ${update_every} seconds." - ${mysleep} $update_every - fi - - test ${now_ms} -ge ${exit_at} && exit 0 - done - - fatal "nothing left to do, exiting..." -} - -global_update diff --git a/collectors/charts.d.plugin/charts.d.plugin.in b/collectors/charts.d.plugin/charts.d.plugin.in index 05a63875b..a3f0aa954 100755 --- a/collectors/charts.d.plugin/charts.d.plugin.in +++ b/collectors/charts.d.plugin/charts.d.plugin.in @@ -281,7 +281,14 @@ run() { if [ "z${1}" = "z-t" -a "${2}" != "0" ]; then t="${2}" shift 2 - timeout ${t} "${@}" 2>"${TMP_DIR}/run.${pid}" + case "${NETDATA_SYSTEM_OS_ID}" in + "alpine") + timeout -t ${t} "${@}" 2>"${TMP_DIR}/run.${pid}" + ;; + *) + timeout ${t} "${@}" 2>"${TMP_DIR}/run.${pid}" + ;; + esac ret=$? else "${@}" 2>"${TMP_DIR}/run.${pid}" -- cgit v1.2.3