From 6d2e027eb728c8294fdd7c3692e9853b3ca2603b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 21 Feb 2019 20:34:08 +0100 Subject: Merging upstream version 1.12.1. Signed-off-by: Daniel Baumann --- daemon/Makefile.in | 565 +++++++++++++++++++++++++++++++++++++++++ daemon/anonymous-statistics.sh | 197 ++++++++++++++ daemon/config/README.md | 70 ++--- daemon/main.c | 2 +- 4 files changed, 798 insertions(+), 36 deletions(-) create mode 100644 daemon/Makefile.in create mode 100644 daemon/anonymous-statistics.sh (limited to 'daemon') diff --git a/daemon/Makefile.in b/daemon/Makefile.in new file mode 100644 index 000000000..121c48314 --- /dev/null +++ b/daemon/Makefile.in @@ -0,0 +1,565 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# SPDX-License-Identifier: GPL-3.0-or-later + + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +DIST_COMMON = $(top_srcdir)/build/subst.inc $(srcdir)/Makefile.in \ + $(srcdir)/Makefile.am $(dist_plugins_SCRIPTS) \ + $(dist_noinst_DATA) +subdir = daemon +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \ + $(top_srcdir)/build/m4/ax_c__generic.m4 \ + $(top_srcdir)/build/m4/ax_c_lto.m4 \ + $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \ + $(top_srcdir)/build/m4/ax_c_mallopt.m4 \ + $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \ + $(top_srcdir)/build/m4/ax_pthread.m4 \ + $(top_srcdir)/build/m4/jemalloc.m4 \ + $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(pluginsdir)" +SCRIPTS = $(dist_plugins_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +DATA = $(dist_noinst_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CUPSCONFIG = @CUPSCONFIG@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@ +IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@ +LDFLAGS = @LDFLAGS@ +LIBCAP_CFLAGS = @LIBCAP_CFLAGS@ +LIBCAP_LIBS = @LIBCAP_LIBS@ +LIBMNL_CFLAGS = @LIBMNL_CFLAGS@ +LIBMNL_LIBS = @LIBMNL_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MATH_CFLAGS = @MATH_CFLAGS@ +MATH_LIBS = @MATH_LIBS@ +MKDIR_P = @MKDIR_P@ +NFACCT_CFLAGS = @NFACCT_CFLAGS@ +NFACCT_LIBS = @NFACCT_LIBS@ +OBJEXT = @OBJEXT@ +OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@ +OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@ +OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@ +OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@ +OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@ +OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@ +OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@ +OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@ +OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@ +OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@ +OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@ +OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@ +OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@ +OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSE_CANDIDATE = @SSE_CANDIDATE@ +STRIP = @STRIP@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VERSION = @VERSION@ +ZLIB_CFLAGS = @ZLIB_CFLAGS@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_target = @build_target@ +build_vendor = @build_vendor@ +builddir = @builddir@ +cachedir = @cachedir@ +chartsdir = @chartsdir@ +configdir = @configdir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +has_jemalloc = @has_jemalloc@ +has_tcmalloc = @has_tcmalloc@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libconfigdir = @libconfigdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logdir = @logdir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nodedir = @nodedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pluginsdir = @pluginsdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +pythondir = @pythondir@ +registrydir = @registrydir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +varlibdir = @varlibdir@ +webdir = @webdir@ +AUTOMAKE_OPTIONS = subdir-objects +MAINTAINERCLEANFILES = $(srcdir)/Makefile.in +CLEANFILES = \ + anonymous-statistics.sh \ + $(NULL) + +SUFFIXES = .in +dist_noinst_DATA = \ + README.md \ + config/README.md \ + anonymous-statistics.sh.in \ + $(NULL) + +dist_plugins_SCRIPTS = \ + anonymous-statistics.sh \ + $(NULL) + +all: all-am + +.SUFFIXES: +.SUFFIXES: .in +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu daemon/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu daemon/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/build/subst.inc: + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_pluginsSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) $(DATA) +installdirs: + for dir in "$(DESTDIR)$(pluginsdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_pluginsSCRIPTS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_pluginsSCRIPTS + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dist_pluginsSCRIPTS install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \ + uninstall-am uninstall-dist_pluginsSCRIPTS + +.in: + if sed \ + -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \ + -e 's#[@]sbindir_POST@#$(sbindir)#g' \ + -e 's#[@]configdir_POST@#$(configdir)#g' \ + -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \ + -e 's#[@]cachedir_POST@#$(cachedir)#g' \ + -e 's#[@]registrydir_POST@#$(registrydir)#g' \ + -e 's#[@]varlibdir_POST@#$(varlibdir)#g' \ + $< > $@.tmp; then \ + mv "$@.tmp" "$@"; \ + else \ + rm -f "$@.tmp"; \ + false; \ + fi + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/daemon/anonymous-statistics.sh b/daemon/anonymous-statistics.sh new file mode 100644 index 000000000..f6339af51 --- /dev/null +++ b/daemon/anonymous-statistics.sh @@ -0,0 +1,197 @@ +#!/usr/bin/env sh + +# Valid actions: + +# - FATAL - netdata exited due to a fatal condition +# ACTION_RESULT -- program name and thread tag +# ACTION_DATA -- fmt, args passed to fatal +# - START - netdata started +# ACTION_DATA -- nan +# - EXIT - installation action +# ACTION_DATA -- ret value of + +ACTION="${1}" +ACTION_RESULT="${2}" +ACTION_DATA="${3}" +ACTION_DATA=$(echo "${ACTION_DATA}" | tr '"' "'") + +# ------------------------------------------------------------------------------------------------- +# check opt-out + +if [ -f "/etc/netdata/.opt-out-from-anonymous-statistics" ]; then + exit 0 +fi + +# ------------------------------------------------------------------------------------------------- +# detect the operating system + +OS_DETECTION="unknown" +NAME="unknown" +VERSION="unknown" +VERSION_ID="unknown" +ID="unknown" +ID_LIKE="unknown" + +if [ -f "/etc/os-release" ]; then + OS_DETECTION="/etc/os-release" + eval "$(grep -E "^(NAME|ID|ID_LIKE|VERSION|VERSION_ID)=" /dev/null)" ]; then + if [ "${OS_DETECTION}" = "unknown" ]; then OS_DETECTION="lsb_release"; else OS_DETECTION="Mixed"; fi + if [ "${NAME}" = "unknown" ]; then NAME="$(lsb_release -is 2>/dev/null)"; fi + if [ "${VERSION}" = "unknown" ]; then VERSION="$(lsb_release -rs 2>/dev/null)"; fi + if [ "${ID}" = "unknown" ]; then ID="$(lsb_release -cs 2>/dev/null)"; fi + fi +fi + +# ------------------------------------------------------------------------------------------------- +# detect the kernel + +KERNEL_NAME="$(uname -s)" +KERNEL_VERSION="$(uname -r)" +ARCHITECTURE="$(uname -m)" + +# ------------------------------------------------------------------------------------------------- +# detect the virtualization + +VIRTUALIZATION="unknown" +VIRT_DETECTION="none" +CONTAINER="unknown" +CONT_DETECTION="none" + +if [ -n "$(command -v systemd-detect-virt 2>/dev/null)" ]; then + VIRTUALIZATION="$(systemd-detect-virt -v)" + VIRT_DETECTION="systemd-detect-virt" + CONTAINER="$(systemd-detect-virt -c)" + CONT_DETECTION="systemd-detect-virt" +else + if grep -q "^flags.*hypervisor" /proc/cpuinfo 2>/dev/null; then + VIRTUALIZATION="hypervisor" + VIRT_DETECTION="/proc/cpuinfo" + fi +fi + +# ------------------------------------------------------------------------------------------------- +# detect containers with heuristics + +if [ "${CONTAINER}" = "unknown" ] ; then + IFS='(, ' read -r process _ /dev/null 2>&1; then + CONTAINER="container" + CONT_DETECTION="/bin/running-in-container" + fi + + # lxc sets environment variable 'container' + #shellcheck disable=SC2154 + if [ -n "${container}" ]; then + CONTAINER="lxc" + CONT_DETECTION="containerenv" + fi + + # docker creates /.dockerenv + # http://stackoverflow.com/a/25518345 + if [ -f "/.dockerenv" ]; then + CONTAINER="docker" + CONT_DETECTION="dockerenv" + fi +fi + +# ------------------------------------------------------------------------------------------------- +# check netdata version + +if [ -z "${NETDATA_VERSION}" ]; then + NETDATA_VERSION="uknown" + netdata -V >/dev/null 2>&1 && NETDATA_VERSION="$(netdata -V 2>&1 | cut -d ' ' -f 2)" +fi + +# ------------------------------------------------------------------------------------------------- +# check netdata unique id +if [ -z "${NETDATA_REGISTRY_UNIQUE_ID}" ] ; then + if [ -f "/var/lib/netdata/registry/netdata.public.unique.id" ]; then + NETDATA_REGISTRY_UNIQUE_ID="$(cat "/var/lib/netdata/registry/netdata.public.unique.id")" + else + NETDATA_REGISTRY_UNIQUE_ID="unknown" + fi +fi + + +# ------------------------------------------------------------------------------------------------- +# send the anonymous statistics to GA +# https://developers.google.com/analytics/devguides/collection/protocol/v1/parameters +if [ -n "$(command -v curl 2>/dev/null)" ]; then + curl -X POST -Ss --max-time 2 \ + --data "v=1" \ + --data "tid=UA-64295674-3" \ + --data "aip=1" \ + --data "ds=shell" \ + --data-urlencode "cid=${NETDATA_REGISTRY_UNIQUE_ID}" \ + --data-urlencode "cs=${NETDATA_REGISTRY_UNIQUE_ID}" \ + --data "t=event" \ + --data "ni=1" \ + --data "an=anonymous-statistics" \ + --data-urlencode "av=${NETDATA_VERSION}" \ + --data-urlencode "ec=${ACTION}" \ + --data-urlencode "ea=${ACTION_RESULT}" \ + --data-urlencode "el=${ACTION_DATA}" \ + --data-urlencode "cd1=${NAME}" \ + --data-urlencode "cd2=${ID}" \ + --data-urlencode "cd3=${ID_LIKE}" \ + --data-urlencode "cd4=${VERSION}" \ + --data-urlencode "cd5=${VERSION_ID}" \ + --data-urlencode "cd6=${OS_DETECTION}" \ + --data-urlencode "cd7=${KERNEL_NAME}" \ + --data-urlencode "cd8=${KERNEL_VERSION}" \ + --data-urlencode "cd9=${ARCHITECTURE}" \ + --data-urlencode "cd10=${VIRTUALIZATION}" \ + --data-urlencode "cd11=${VIRT_DETECTION}" \ + --data-urlencode "cd12=${CONTAINER}" \ + --data-urlencode "cd13=${CONT_DETECTION}" \ + "https://www.google-analytics.com/collect" >/dev/null 2>&1 +else + wget -q -O - --timeout=1 "https://www.google-analytics.com/collect?\ +&v=1\ +&tid=UA-64295674-3\ +&aip=1\ +&ds=shell\ +&cid=${NETDATA_REGISTRY_UNIQUE_ID}\ +&cs=${NETDATA_REGISTRY_UNIQUE_ID}\ +&t=event\ +&ni=1\ +&an=anonymous-statistics\ +&av=${NETDATA_VERSION}\ +&ec=${ACTION}\ +&ea=${ACTION_RESULT}\ +&el=${ACTION_DATA}\ +&cd1=${NAME}\ +&cd2=${ID}\ +&cd3=${ID_LIKE}\ +&cd4=${VERSION}\ +&cd5=${VERSION_ID}\ +&cd6=${OS_DETECTION}\ +&cd7=${KERNEL_NAME}\ +&cd8=${KERNEL_VERSION}\ +&cd9=${ARCHITECTURE}\ +&cd10=${VIRTUALIZATION}\ +&cd11=${VIRT_DETECTION}\ +&cd12=${CONTAINER}\ +&cd13=${CONT_DETECTION}\ +" > /dev/null 2>&1 +fi diff --git a/daemon/config/README.md b/daemon/config/README.md index 64f8564cc..44bca2b2d 100644 --- a/daemon/config/README.md +++ b/daemon/config/README.md @@ -12,9 +12,9 @@ This config file **is not needed by default**. Netdata works fine out of the box 2. `[web]` to [configure the web server](../../web/server). 3. `[plugins]` to [configure](#plugins-section-options) which [collectors](../../collectors) to use and PATH settings. 4. `[health]` to [configure](#health-section-options) general settings for [health monitoring](../../health) -5. `[registry]` for the [netdata registry](../../registry). +5. `[registry]` for the [netdata registry](../../registry). 6. `[backend]` to set up [streaming and replication](../../streaming) options. -7. `[statsd]` for the general settings of the [stats.d.plugin](../../collectors/statsd.plugin). +7. `[statsd]` for the general settings of the [stats.d.plugin](../../collectors/statsd.plugin). 8. `[plugin:NAME]` sections for each collector plugin, under the comment [Per plugin configuration](#per-plugin-configuration). 9. `[CHART_NAME]` sections for each chart defined, under the comment [Per chart configuration](#per-chart-configuration). @@ -46,33 +46,33 @@ process scheduling policy | `keep` | See [netdata process scheduling policy](.. OOM score | `1000` | See [OOM score](../#oom-score) glibc malloc arena max for plugins | `1` | See [Virtual memory](../#virtual-memory). glibc malloc arena max for netdata | `1` | See [Virtual memory](../#virtual-memory). -hostname | auto-detected | The hostname of the computer running netdata. -history | `3996` | The number of entries the netdata daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](../../database/#database) for more information. -update every | `1` | The frequency in seconds, for data collection. For more information see [Performance](../../docs/Performance.md#performance). -config directory | `/etc/netdata` | The directory configuration files are kept. -stock config directory | `/usr/lib/netdata/conf.d` | -log directory | `/var/log/netdata` | The directory in which the [log files](../#log-files) are kept. -web files directory | `/usr/share/netdata/web` | The directory the web static files are kept. -cache directory | `/var/cache/netdata` | The directory the memory database will be stored if and when netdata exits. Netdata will re-read the database when it will start again, to continue from the same point. +hostname | auto-detected | The hostname of the computer running netdata. +history | `3996` | The number of entries the netdata daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](../../database/#database) for more information. +update every | `1` | The frequency in seconds, for data collection. For more information see [Performance](../../docs/Performance.md#performance). +config directory | `/etc/netdata` | The directory configuration files are kept. +stock config directory | `/usr/lib/netdata/conf.d` | +log directory | `/var/log/netdata` | The directory in which the [log files](../#log-files) are kept. +web files directory | `/usr/share/netdata/web` | The directory the web static files are kept. +cache directory | `/var/cache/netdata` | The directory the memory database will be stored if and when netdata exits. Netdata will re-read the database when it will start again, to continue from the same point. lib directory | `/var/lib/netdata` | Contains the alarm log and the netdata instance guid. home directory | `/var/cache/netdata` | Contains the db files for the collected metrics -plugins directory | `"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"` | The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes. -memory mode | `save` | When set to `save` netdata will save its round robin database on exit and load it on startup. When set to `map` the cache files will be updated in real time (check `man mmap` - do not set this on systems with heavy load or slow disks - the disks will continuously sync the in-memory database of netdata). When set to `ram` the round robin database will be temporary and it will be lost when netdata exits. `none` disables the database at this host. This also disables health monitoring (there cannot be health monitoring without a database). host access prefix | | This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43). -memory deduplication (ksm) | `yes` | When set to `yes`, netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](../../database/#ksm) -TZ environment variable | `:/etc/localtime` | Where to find the timezone -timezone | auto-detected | The timezone retrieved from the environment variable -debug flags | `0x0000000000000000` | Bitmap of debug options to enable. For more information check [Tracing Options](../#debugging). -debug log | `/var/log/netdata/debug.log` | The filename to save debug information. This file will not be created is debugging is not enabled. You can also set it to `syslog` to send the debug messages to syslog, or `none` to disable this log. For more information check [Tracing Options](../#debugging). -error log | `/var/log/netdata/error.log` | The filename to save error messages for netdata daemon and all plugins (`stderr` is sent here for all netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log. -access log | `/var/log/netdata/access.log` | The filename to save the log of web clients accessing netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log. +plugins directory | `"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"` | The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes. +memory mode | `save` | When set to `save` netdata will save its round robin database on exit and load it on startup. When set to `map` the cache files will be updated in real time (check `man mmap` - do not set this on systems with heavy load or slow disks - the disks will continuously sync the in-memory database of netdata). When set to `ram` the round robin database will be temporary and it will be lost when netdata exits. `none` disables the database at this host. This also disables health monitoring (there cannot be health monitoring without a database). host access prefix | | This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43). +memory deduplication (ksm) | `yes` | When set to `yes`, netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](../../database/#ksm) +TZ environment variable | `:/etc/localtime` | Where to find the timezone +timezone | auto-detected | The timezone retrieved from the environment variable +debug flags | `0x0000000000000000` | Bitmap of debug options to enable. For more information check [Tracing Options](../#debugging). +debug log | `/var/log/netdata/debug.log` | The filename to save debug information. This file will not be created is debugging is not enabled. You can also set it to `syslog` to send the debug messages to syslog, or `none` to disable this log. For more information check [Tracing Options](../#debugging). +error log | `/var/log/netdata/error.log` | The filename to save error messages for netdata daemon and all plugins (`stderr` is sent here for all netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log. +access log | `/var/log/netdata/access.log` | The filename to save the log of web clients accessing netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log. errors flood protection period | `1200` | UNUSED - Length of period (in sec) during which the number of errors should not exceed the `errors to trigger flood protection`. errors to trigger flood protection | `200` | UNUSED - Number of errors written to the log in `errors flood protection period` sec before flood protection is activated. -run as user | `netdata` | The user netdata will run as. -pthread stack size | auto-detected | -cleanup obsolete charts after seconds | `3600` | See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers) -gap when lost iterations above | `1` | +run as user | `netdata` | The user netdata will run as. +pthread stack size | auto-detected | +cleanup obsolete charts after seconds | `3600` | See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also sets the timeout for cleaning up obsolete dimensions +gap when lost iterations above | `1` | cleanup orphan hosts after seconds | `3600` | How long to wait until automatically removing from the DB a remote netdata host (slave) that is no longer sending data. -delete obsolete charts files | `yes` | See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers) +delete obsolete charts files | `yes` | See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also affects the deletion of files for obsolete dimensions delete orphan hosts files | `yes` | Set to `no` to disable non-responsive host removal. ### [web] section options @@ -81,40 +81,40 @@ Refer to the [web server documentation](../../web/server) ### [plugins] section options -In this section you will see be a boolean (`yes`/`no`) option for each plugin (e.g. tc, cgroups, apps, proc etc.). Note that the configuration options in this section for the orchestrator plugins `python.d`, `charts.d` and `node.d` control **all the modules** written for that orchestrator. For instance, setting `python.d = no` means that all Python modules under `collectors/python.d.plugin` will be disabled. +In this section you will see be a boolean (`yes`/`no`) option for each plugin (e.g. tc, cgroups, apps, proc etc.). Note that the configuration options in this section for the orchestrator plugins `python.d`, `charts.d` and `node.d` control **all the modules** written for that orchestrator. For instance, setting `python.d = no` means that all Python modules under `collectors/python.d.plugin` will be disabled. Additionally, there will be the following options: setting | default | info :------:|:-------:|:---- -PATH environment variable | `auto-detected` | +PATH environment variable | `auto-detected` | PYTHONPATH environment variable | | Used to set a custom python path -enable running new plugins | `yes` | When set to `yes`, netdata will enable detected plugins, even if they are not configured explicitly. Setting this to `no` will only enable plugins explicitly configirued in this file with a `yes` +enable running new plugins | `yes` | When set to `yes`, netdata will enable detected plugins, even if they are not configured explicitly. Setting this to `no` will only enable plugins explicitly configirued in this file with a `yes` check for new plugins every | 60 | The time in seconds to check for new plugins in the plugins directory. This allows having other applications dynamically creating plugins for netdata. -checks | `no` | This is a debugging plugin for the internal latency +checks | `no` | This is a debugging plugin for the internal latency ### [health] section options -This section controls the general behavior of the health monitoring capabilities of Netdata. +This section controls the general behavior of the health monitoring capabilities of Netdata. -Specific alarms are configured in per-collector config files under the `health.d` directory. For more info, see [health monitoring](../../health/#health-monitoring). +Specific alarms are configured in per-collector config files under the `health.d` directory. For more info, see [health monitoring](../../health/#health-monitoring). -[Alarm notifications](../../health/notifications/#netdata-alarm-notifications) are configured in `health_alarm_notify.conf`. +[Alarm notifications](../../health/notifications/#netdata-alarm-notifications) are configured in `health_alarm_notify.conf`. setting | default | info :------:|:-------:|:---- enabled | `yes` | Set to `no` to disable all alarms and notifications in memory max health log entries | 1000 | Size of the alarm history held in RAM -script to execute on alarm | `/usr/libexec/netdata/plugins.d/alarm-notify.sh` | The script that sends alarm notifications. +script to execute on alarm | `/usr/libexec/netdata/plugins.d/alarm-notify.sh` | The script that sends alarm notifications. stock health configuration directory | `/usr/lib/netdata/conf.d/health.d` | Contains the stock alarm configuration files for each collector health configuration directory | `/etc/netdata/health.d` | The directory containing the user alarm configuration files, to override the stock configurations -run at least every seconds | `10` | Controls how often all alarm conditions should be evaluated. +run at least every seconds | `10` | Controls how often all alarm conditions should be evaluated. postpone alarms during hibernation for seconds | `60` | Prevents false alarms. May need to be increased if you get alarms during hibernation. rotate log every lines | 2000 | Controls the number of alarm log entries stored in `/health-log.db`, where is the one configured in the [[global] section](#global-section-options) ### [registry] section options -To understand what this section is and how it should be configured, please refer to the [registry documentation](../../registry). +To understand what this section is and how it should be configured, please refer to the [registry documentation](../../registry). ### [backend] @@ -135,7 +135,7 @@ External plugins will have only 2 options at `netdata.conf`: setting | default | info :------:|:-------:|:---- update every|the value of `[global].update every` setting|The frequency in seconds the plugin should collect values. For more information check [Performance](../../docs/Performance.md#performance). -command options|*empty*|Additional command line options to pass to the plugin. +command options|*empty*|Additional command line options to pass to the plugin. External plugins that need additional configuration may support a dedicated file in `/etc/netdata`. Check their documentation. diff --git a/daemon/main.c b/daemon/main.c index 9e9bc55c2..e93e97caa 100644 --- a/daemon/main.c +++ b/daemon/main.c @@ -60,7 +60,6 @@ struct netdata_static_thread static_threads[] = { NETDATA_PLUGIN_HOOK_MACOS // linux internal plugins - NETDATA_PLUGIN_HOOK_LINUX_NFACCT NETDATA_PLUGIN_HOOK_LINUX_PROC NETDATA_PLUGIN_HOOK_LINUX_DISKSPACE NETDATA_PLUGIN_HOOK_LINUX_CGROUPS @@ -956,6 +955,7 @@ int main(int argc, char **argv) { if(i > 0) mallopt(M_ARENA_MAX, 1); #endif + test_clock_boottime(); // prepare configuration environment variables for the plugins -- cgit v1.2.3