From 2e85f9325a797977eea9dfea0a925775ddd211d9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Feb 2021 12:49:00 +0100 Subject: Merging upstream version 1.29.0. Signed-off-by: Daniel Baumann --- docs/export/enable-connector.md | 93 +++++++++++++++++++++++++++++++++++++++ docs/export/external-databases.md | 90 +++++++++++++++++++++++++++++++++++++ 2 files changed, 183 insertions(+) create mode 100644 docs/export/enable-connector.md create mode 100644 docs/export/external-databases.md (limited to 'docs/export') diff --git a/docs/export/enable-connector.md b/docs/export/enable-connector.md new file mode 100644 index 000000000..9789de2d8 --- /dev/null +++ b/docs/export/enable-connector.md @@ -0,0 +1,93 @@ + + +# Enable an exporting connector + +Now that you found the right connector for your [external time-series +database](/docs/export/external-databases.md#supported-databases), you can now enable the exporting engine and the +connector itself. We'll walk through the process of enabling the exporting engine itself, followed by two examples using +the OpenTSDB and Graphite connectors. + +> When you enable the exporting engine and a connector, the Netdata Agent exports metrics _beginning from the time you +> restart its process_, not the entire [database of long-term metrics](/docs/store/change-metrics-storage.md). + +Once you understand the process of enabling a connector, you can translate that knowledge to any other connector. + +## Enable the exporting engine + +Use `edit-config` from your [Netdata config directory](/docs/configure/nodes.md#the-netdata-config-directory) to open +`exporting.conf`: + +```bash +sudo ./edit-config exporting.conf +``` + +Enable the exporting engine itself by setting `enabled` to `yes`: + +```conf +[exporting:global] + enabled = yes +``` + +Save the file but keep it open, as you will edit it again to enable specific connectors. + +## Example: Enable the OpenTSDB connector + +Use the following configuration as a starting point. Copy and paste it into `exporting.conf`. + +```conf +[opentsdb:http:my_opentsdb_http_instance] + enabled = yes + destination = localhost:4242 +``` + +Replace `my_opentsdb_http_instance` with an instance name of your choice, and change the `destination` setting to the IP +address or hostname of your OpenTSDB database. + +Restart your Agent with `sudo systemctl restart netdata` to begin exporting to your OpenTSDB database. The Netdata Agent +exports metrics _beginning from the time the process starts_, and because it exports as metrics are collected, you +should start seeing data in your external database after only a few seconds. + +Any further configuration is optional, based on your needs and the configuration of your OpenTSDB database. See the +[OpenTSDB connector doc](/exporting/opentsdb/README.md) and [exporting engine +reference](/exporting/README.md#configuration) for details. + +## Example: Enable the Graphite connector + +Use the following configuration as a starting point. Copy and paste it into `exporting.conf`. + +```conf +[graphite:my_graphite_instance] + enabled = yes + destination = 203.0.113.0:2003 +``` + +Replace `my_graphite_instance` with an instance name of your choice, and change the `destination` setting to the IP +address or hostname of your Graphite-supported database. + +Restart your Agent with `sudo systemctl restart netdata` to begin exporting to your Graphite-supported database. Because +the Agent exports metrics as they're collected, you should start seeing data in your external database after only a few +seconds. + +Any further configuration is optional, based on your needs and the configuration of your Graphite-supported database. +See [exporting engine reference](/exporting/README.md#configuration) for details. + +## What's next? + +If you want to further configure your exporting connectors, see the [exporting engine +reference](/exporting/README.md#configuration). + +For a comprehensive example of using the Graphite connector, read our guide: [_Export and visualize Netdata metrics in +Graphite_](/docs/guides/export/export-netdata-metrics-graphite.md). Or, start [using host +labels](/docs/guides/using-host-labels.md) on exported metrics. + +### Related reference documentation + +- [Exporting engine reference](/exporting/README.md) +- [OpenTSDB connector](/exporting/opentsdb/README.md) +- [Graphite connector](/exporting/graphite/README.md) + +[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdocs%2Fexporting%2Fenable-connector&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>) diff --git a/docs/export/external-databases.md b/docs/export/external-databases.md new file mode 100644 index 000000000..309b03a87 --- /dev/null +++ b/docs/export/external-databases.md @@ -0,0 +1,90 @@ + + +# Export metrics to external time-series databases + +Netdata allows you to export metrics to external time-series databases with the [exporting +engine](/exporting/README.md). This system uses a number of **connectors** to initiate connections to [more than +thirty](#supported-databases) supported databases, including InfluxDB, Prometheus, Graphite, ElasticSearch, and much +more. + +The exporting engine resamples Netdata's thousands of per-second metrics at a user-configurable interval, and can export +metrics to multiple time-series databases simultaneously. + +Based on your needs and resources you allocated to your external time-series database, you can configure the interval +that metrics are exported or export only certain charts with filtering. You can also choose whether metrics are exported +as-collected, a normalized average, or the sum/volume of metrics values over the configured interval. + +Exporting is an important part of Netdata's effort to be [interoperable](/docs/overview/netdata-monitoring-stack.md) +with other monitoring software. You can use an external time-series database for long-term metrics retention, further +analysis, or correlation with other tools, such as application tracing. + +## Supported databases + +Netdata supports exporting metrics to the following databases through several +[connectors](/exporting/README.md#features). Once you find the connector that works for your database, open its +documentation and the [enabling a connector](/docs/export/enable-connector.md) doc for details on enabling it. + +- **AppOptics**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **AWS Kinesis**: [AWS Kinesis Data Streams](/exporting/aws_kinesis/README.md) +- **Azure Data Explorer**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Azure Event Hubs**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Blueflood**: [Graphite](/exporting/graphite/README.md) +- **Chronix**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Cortex**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **CrateDB**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **ElasticSearch**: [Graphite](/exporting/graphite/README.md), [Prometheus remote + write](/exporting/prometheus/remote_write/README.md) +- **Gnocchi**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Google BigQuery**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Google Cloud Pub/Sub**: [Google Cloud Pub/Sub Service](/exporting/pubsub/README.md) +- **Graphite**: [Graphite](/exporting/graphite/README.md), [Prometheus remote + write](/exporting/prometheus/remote_write/README.md) +- **InfluxDB**: [Graphite](/exporting/graphite/README.md), [Prometheus remote + write](/exporting/prometheus/remote_write/README.md) +- **IRONdb**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **JSON**: [JSON document databases](/exporting/json/README.md) +- **Kafka**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **KairosDB**: [Graphite](/exporting/graphite/README.md), [OpenTSDB](/exporting/opentsdb/README.md) +- **M3DB**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **MetricFire**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **MongoDB**: [MongoDB](/exporting/mongodb/) +- **New Relic**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **OpenTSDB**: [OpenTSDB](/exporting/opentsdb/README.md), [Prometheus remote + write](/exporting/prometheus/remote_write/README.md) +- **PostgreSQL**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) + via [PostgreSQL Prometheus Adapter](https://github.com/CrunchyData/postgresql-prometheus-adapter) +- **Prometheus**: [Prometheus scraper](/exporting/prometheus/README.md) +- **TimescaleDB**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md), + [netdata-timescale-relay](/exporting/TIMESCALE.md) +- **QuasarDB**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **SignalFx**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Splunk**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **TiKV**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Thanos**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **VictoriaMetrics**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) +- **Wavefront**: [Prometheus remote write](/exporting/prometheus/remote_write/README.md) + +Can't find your preferred external time-series database? Ask our [community](https://community.netdata.cloud/) for +solutions, or file an [issue on +GitHub](https://github.com/netdata/netdata/issues/new?labels=bug%2C+needs+triage&template=bug_report.md). + +## What's next? + +We recommend you read our document on [enabling a connector](/docs/export/enable-connector.md) to learn about the +process and discover important configuration options. If you would rather skip ahead, click on any of the above links to +connectors for their reference documentation, which outline any prerequisites to install for that connector, along with +connector-specific configuration options. + +Read about one possible use case for exporting metrics in our guide: [_Export and visualize Netdata metrics in +Graphite_](/docs/guides/export/export-netdata-metrics-graphite.md). + +### Related reference documentation + +- [Exporting engine reference](/exporting/README.md) +- [Backends reference (deprecated)](/backends/README.md) + +[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdocs%2Fexporting%2Fexternal-databases&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>) -- cgit v1.2.3