From 87cce1817d03daca8c31be82d781ec47a4560087 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 16 Mar 2019 08:50:45 +0100 Subject: Merging upstream version 1.13.0. Signed-off-by: Daniel Baumann --- health/notifications/Makefile.in | 756 +++++++++++ health/notifications/alarm-notify.sh | 2219 +++++++++++++++++++++++++++++++ health/notifications/prowl/Makefile.inc | 12 - health/notifications/prowl/README.md | 22 - 4 files changed, 2975 insertions(+), 34 deletions(-) create mode 100644 health/notifications/Makefile.in create mode 100644 health/notifications/alarm-notify.sh delete mode 100644 health/notifications/prowl/Makefile.inc delete mode 100644 health/notifications/prowl/README.md (limited to 'health/notifications') diff --git a/health/notifications/Makefile.in b/health/notifications/Makefile.in new file mode 100644 index 000000000..96e48e922 --- /dev/null +++ b/health/notifications/Makefile.in @@ -0,0 +1,756 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# SPDX-License-Identifier: GPL-3.0-or-later + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +DIST_COMMON = $(top_srcdir)/build/subst.inc \ + $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc \ + $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc \ + $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc \ + $(srcdir)/kavenegar/Makefile.inc \ + $(srcdir)/messagebird/Makefile.inc \ + $(srcdir)/pagerduty/Makefile.inc \ + $(srcdir)/pushbullet/Makefile.inc \ + $(srcdir)/pushover/Makefile.inc \ + $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc \ + $(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc \ + $(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc \ + $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(dist_plugins_SCRIPTS) $(dist_libconfig_DATA) \ + $(dist_noinst_DATA) +subdir = health/notifications +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \ + $(top_srcdir)/build/m4/ax_c__generic.m4 \ + $(top_srcdir)/build/m4/ax_c_lto.m4 \ + $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \ + $(top_srcdir)/build/m4/ax_c_mallopt.m4 \ + $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \ + $(top_srcdir)/build/m4/ax_pthread.m4 \ + $(top_srcdir)/build/m4/jemalloc.m4 \ + $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(pluginsdir)" \ + "$(DESTDIR)$(libconfigdir)" +SCRIPTS = $(dist_plugins_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +DATA = $(dist_libconfig_DATA) $(dist_noinst_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CUPSCONFIG = @CUPSCONFIG@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@ +IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@ +LDFLAGS = @LDFLAGS@ +LIBCAP_CFLAGS = @LIBCAP_CFLAGS@ +LIBCAP_LIBS = @LIBCAP_LIBS@ +LIBMNL_CFLAGS = @LIBMNL_CFLAGS@ +LIBMNL_LIBS = @LIBMNL_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MATH_CFLAGS = @MATH_CFLAGS@ +MATH_LIBS = @MATH_LIBS@ +MKDIR_P = @MKDIR_P@ +NFACCT_CFLAGS = @NFACCT_CFLAGS@ +NFACCT_LIBS = @NFACCT_LIBS@ +OBJEXT = @OBJEXT@ +OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@ +OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@ +OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@ +OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@ +OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@ +OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@ +OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@ +OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@ +OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@ +OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@ +OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@ +OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@ +OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@ +OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSE_CANDIDATE = @SSE_CANDIDATE@ +STRIP = @STRIP@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VERSION = @VERSION@ +ZLIB_CFLAGS = @ZLIB_CFLAGS@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_target = @build_target@ +build_vendor = @build_vendor@ +builddir = @builddir@ +cachedir = @cachedir@ +chartsdir = @chartsdir@ +configdir = @configdir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +has_jemalloc = @has_jemalloc@ +has_tcmalloc = @has_tcmalloc@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libconfigdir = @libconfigdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logdir = @logdir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nodedir = @nodedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pluginsdir = @pluginsdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +pythondir = @pythondir@ +registrydir = @registrydir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +varlibdir = @varlibdir@ +webdir = @webdir@ +AUTOMAKE_OPTIONS = subdir-objects +MAINTAINERCLEANFILES = $(srcdir)/Makefile.in +CLEANFILES = \ + alarm-notify.sh \ + $(NULL) + +SUFFIXES = .in +dist_libconfig_DATA = \ + health_alarm_notify.conf \ + health_email_recipients.conf \ + $(NULL) + +dist_plugins_SCRIPTS = \ + alarm-notify.sh \ + alarm-email.sh \ + alarm-test.sh \ + $(NULL) + + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files +dist_noinst_DATA = alarm-notify.sh.in README.md $(NULL) \ + alerta/README.md alerta/Makefile.inc $(NULL) awssns/README.md \ + awssns/Makefile.inc $(NULL) discord/README.md \ + discord/Makefile.inc $(NULL) email/README.md \ + email/Makefile.inc $(NULL) flock/README.md flock/Makefile.inc \ + $(NULL) irc/README.md irc/Makefile.inc $(NULL) \ + kavenegar/README.md kavenegar/Makefile.inc $(NULL) \ + messagebird/README.md messagebird/Makefile.inc $(NULL) \ + pagerduty/README.md pagerduty/Makefile.inc $(NULL) \ + pushbullet/README.md pushbullet/Makefile.inc $(NULL) \ + pushover/README.md pushover/Makefile.inc $(NULL) \ + rocketchat/README.md rocketchat/Makefile.inc $(NULL) \ + slack/README.md slack/Makefile.inc $(NULL) syslog/README.md \ + syslog/Makefile.inc $(NULL) telegram/README.md \ + telegram/Makefile.inc $(NULL) twilio/README.md \ + twilio/Makefile.inc $(NULL) web/README.md web/Makefile.inc \ + $(NULL) +all: all-am + +.SUFFIXES: +.SUFFIXES: .in +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc $(srcdir)/kavenegar/Makefile.inc $(srcdir)/messagebird/Makefile.inc $(srcdir)/pagerduty/Makefile.inc $(srcdir)/pushbullet/Makefile.inc $(srcdir)/pushover/Makefile.inc $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc $(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc $(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu health/notifications/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu health/notifications/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/build/subst.inc $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc $(srcdir)/kavenegar/Makefile.inc $(srcdir)/messagebird/Makefile.inc $(srcdir)/pagerduty/Makefile.inc $(srcdir)/pushbullet/Makefile.inc $(srcdir)/pushover/Makefile.inc $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc $(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc $(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc: + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_pluginsSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) +install-dist_libconfigDATA: $(dist_libconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \ + done + +uninstall-dist_libconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) $(DATA) +installdirs: + for dir in "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(libconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_libconfigDATA \ + install-dist_pluginsSCRIPTS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_libconfigDATA \ + uninstall-dist_pluginsSCRIPTS + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dist_libconfigDATA \ + install-dist_pluginsSCRIPTS install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-dist_libconfigDATA uninstall-dist_pluginsSCRIPTS + +.in: + if sed \ + -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \ + -e 's#[@]sbindir_POST@#$(sbindir)#g' \ + -e 's#[@]configdir_POST@#$(configdir)#g' \ + -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \ + -e 's#[@]cachedir_POST@#$(cachedir)#g' \ + -e 's#[@]registrydir_POST@#$(registrydir)#g' \ + -e 's#[@]varlibdir_POST@#$(varlibdir)#g' \ + $< > $@.tmp; then \ + mv "$@.tmp" "$@"; \ + else \ + rm -f "$@.tmp"; \ + false; \ + fi + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/health/notifications/alarm-notify.sh b/health/notifications/alarm-notify.sh new file mode 100644 index 000000000..41099df71 --- /dev/null +++ b/health/notifications/alarm-notify.sh @@ -0,0 +1,2219 @@ +#!/usr/bin/env bash +#shellcheck source=/dev/null disable=SC2086,SC2154 + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2017 Costa Tsaousis +# SPDX-License-Identifier: GPL-3.0-or-later +# +# Script to send alarm notifications for netdata +# +# Features: +# - multiple notification methods +# - multiple roles per alarm +# - multiple recipients per role +# - severity filtering per recipient +# +# Supported notification methods: +# - emails by @ktsaou +# - slack.com notifications by @ktsaou +# - alerta.io notifications by @kattunga +# - discordapp.com notifications by @lowfive +# - pushover.net notifications by @ktsaou +# - pushbullet.com push notifications by Tiago Peralta @tperalta82 #1070 +# - telegram.org notifications by @hashworks #1002 +# - twilio.com notifications by Levi Blaney @shadycuz #1211 +# - kafka notifications by @ktsaou #1342 +# - pagerduty.com notifications by Jim Cooley @jimcooley #1373 +# - messagebird.com notifications by @tech_no_logical #1453 +# - hipchat notifications by @ktsaou #1561 +# - fleep notifications by @Ferroin +# - prowlapp.com notifications by @Ferroin +# - custom notifications by @ktsaou +# - syslog messages by @Ferroin +# - Microsoft Team notification by @tioumen +# - RocketChat notifications by @Hermsi1337 #3777 + +# ----------------------------------------------------------------------------- +# testing notifications + +if { [ "${1}" = "test" ] || [ "${2}" = "test" ]; } && [ "${#}" -le 2 ]; then + if [ "${2}" = "test" ]; then + recipient="${1}" + else + recipient="${2}" + fi + + [ -z "${recipient}" ] && recipient="sysadmin" + + id=1 + last="CLEAR" + test_res=0 + for x in "WARNING" "CRITICAL" "CLEAR"; do + echo >&2 + echo >&2 "# SENDING TEST ${x} ALARM TO ROLE: ${recipient}" + + "${0}" "${recipient}" "$(hostname)" 1 1 "${id}" "$(date +%s)" "test_alarm" "test.chart" "test.family" "${x}" "${last}" 100 90 "${0}" 1 $((0 + id)) "units" "this is a test alarm to verify notifications work" "new value" "old value" "evaluated expression" "expression variable values" 0 0 + #shellcheck disable=SC2181 + if [ $? -ne 0 ]; then + echo >&2 "# FAILED" + test_res=1 + else + echo >&2 "# OK" + fi + + last="${x}" + id=$((id + 1)) + done + + exit $test_res +fi + +export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/sbin" +export LC_ALL=C + +# ----------------------------------------------------------------------------- + +PROGRAM_NAME="$(basename "${0}")" + +logdate() { + date "+%Y-%m-%d %H:%M:%S" +} + +log() { + local status="${1}" + shift + + echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${*}" + +} + +warning() { + log WARNING "${@}" +} + +error() { + log ERROR "${@}" +} + +info() { + log INFO "${@}" +} + +fatal() { + log FATAL "${@}" + exit 1 +} + +debug=${NETDATA_ALARM_NOTIFY_DEBUG-0} +debug() { + [ "${debug}" = "1" ] && log DEBUG "${@}" +} + +docurl() { + if [ -z "${curl}" ]; then + error "${curl} is unset." + return 1 + fi + + if [ "${debug}" = "1" ]; then + echo >&2 "--- BEGIN curl command ---" + printf >&2 "%q " ${curl} "${@}" + echo >&2 + echo >&2 "--- END curl command ---" + + local out code ret + out=$(mktemp /tmp/netdata-health-alarm-notify-XXXXXXXX) + code=$(${curl} ${curl_options} --write-out "%{http_code}" --output "${out}" --silent --show-error "${@}") + ret=$? + echo >&2 "--- BEGIN received response ---" + cat >&2 "${out}" + echo >&2 + echo >&2 "--- END received response ---" + echo >&2 "RECEIVED HTTP RESPONSE CODE: ${code}" + rm "${out}" + echo "${code}" + return ${ret} + fi + + ${curl} ${curl_options} --write-out "%{http_code}" --output /dev/null --silent --show-error "${@}" + return $? +} + +# ----------------------------------------------------------------------------- +# List of all the notification mechanisms we support. +# Used in a couple of places to write more compact code. + +method_names=" +email +pushover +pushbullet +telegram +slack +alerta +flock +discord +hipchat +twilio +messagebird +pd +fleep +syslog +custom +msteam +kavenegar +prowl +awssns +rocketchat +" + +# ----------------------------------------------------------------------------- +# this is to be overwritten by the config file + +custom_sender() { + info "not sending custom notification for ${status} of '${host}.${chart}.${name}'" +} + +# ----------------------------------------------------------------------------- + +# check for BASH v4+ (required for associative arrays) +if [ ${BASH_VERSINFO[0]} -lt 4 ]; then + fatal "BASH version 4 or later is required (this is ${BASH_VERSION})." +fi + +# ----------------------------------------------------------------------------- +# defaults to allow running this script by hand + +[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="/etc/netdata" +[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="/usr/lib/netdata/conf.d" +[ -z "${NETDATA_CACHE_DIR}" ] && NETDATA_CACHE_DIR="/var/cache/netdata" +[ -z "${NETDATA_REGISTRY_URL}" ] && NETDATA_REGISTRY_URL="https://registry.my-netdata.io" + +# ----------------------------------------------------------------------------- +# parse command line parameters + +if [ ${1} = "unittest" ]; then + unittest=1 # enable unit testing mode + roles="${2}" # the role that should be used for unit testing + cfgfile="${3}" # the location of the config file to use for unit testing + status="${4}" # the current status : REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL + old_status="${5}" # the previous status: REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL +else + roles="${1}" # the roles that should be notified for this event + args_host="${2}" # the host generated this event + unique_id="${3}" # the unique id of this event + alarm_id="${4}" # the unique id of the alarm that generated this event + event_id="${5}" # the incremental id of the event, for this alarm id + when="${6}" # the timestamp this event occurred + name="${7}" # the name of the alarm, as given in netdata health.d entries + chart="${8}" # the name of the chart (type.id) + family="${9}" # the family of the chart + status="${10}" # the current status : REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL + old_status="${11}" # the previous status: REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL + value="${12}" # the current value of the alarm + old_value="${13}" # the previous value of the alarm + src="${14}" # the line number and file the alarm has been configured + duration="${15}" # the duration in seconds of the previous alarm state + non_clear_duration="${16}" # the total duration in seconds this is/was non-clear + units="${17}" # the units of the value + info="${18}" # a short description of the alarm + value_string="${19}" # friendly value (with units) + # shellcheck disable=SC2034 + # variable is unused, but https://github.com/netdata/netdata/pull/5164#discussion_r255572947 + old_value_string="${20}" # friendly old value (with units), previously named "old_value_string" + calc_expression="${21}" # contains the expression that was evaluated to trigger the alarm + calc_param_values="${22}" # the values of the parameters in the expression, at the time of the evaluation + total_warnings="${23}" # Total number of alarms in WARNING state + total_critical="${24}" # Total number of alarms in CRITICAL state +fi + +# ----------------------------------------------------------------------------- +# find a suitable hostname to use, if netdata did not supply a hostname + +if [ -z ${args_host} ]; then + this_host=$(hostname -s 2>/dev/null) + host="${this_host}" + args_host="${this_host}" +else + host="${args_host}" +fi + +# ----------------------------------------------------------------------------- +# screen statuses we don't need to send a notification + +# don't do anything if this is not WARNING, CRITICAL or CLEAR +if [ "${status}" != "WARNING" ] && [ "${status}" != "CRITICAL" ] && [ "${status}" != "CLEAR" ]; then + info "not sending notification for ${status} of '${host}.${chart}.${name}'" + exit 1 +fi + +# don't do anything if this is CLEAR, but it was not WARNING or CRITICAL +if [ "${clear_alarm_always}" != "YES" ] && [ "${old_status}" != "WARNING" ] && [ "${old_status}" != "CRITICAL" ] && [ "${status}" = "CLEAR" ]; then + info "not sending notification for ${status} of '${host}.${chart}.${name}' (last status was ${old_status})" + exit 1 +fi + +# ----------------------------------------------------------------------------- +# load configuration + +# By default fetch images from the global public registry. +# This is required by default, since all notification methods need to download +# images via the Internet, and private registries might not be reachable. +# This can be overwritten at the configuration file. +images_base_url="https://registry.my-netdata.io" + +# curl options to use +curl_options="" + +# hostname handling +use_fqdn="NO" + +# needed commands +# if empty they will be searched in the system path +curl= +sendmail= + +# enable / disable features +for method_name in ${method_names^^}; do + declare SEND_${method_name}="YES" + declare DEFAULT_RECIPIENT_${method_name} +done + +for method_name in ${method_names}; do + declare -A role_recipients_${method_name} +done + +# slack configs +SLACK_WEBHOOK_URL= + +# Microsoft Team configs +MSTEAM_WEBHOOK_URL= + +# rocketchat configs +ROCKETCHAT_WEBHOOK_URL= + +# alerta configs +ALERTA_WEBHOOK_URL= +ALERTA_API_KEY= + +# flock configs +FLOCK_WEBHOOK_URL= + +# discord configs +DISCORD_WEBHOOK_URL= + +# pushover configs +PUSHOVER_APP_TOKEN= + +# pushbullet configs +PUSHBULLET_ACCESS_TOKEN= +PUSHBULLET_SOURCE_DEVICE= + +# twilio configs +TWILIO_ACCOUNT_SID= +TWILIO_ACCOUNT_TOKEN= +TWILIO_NUMBER= + +# hipchat configs +HIPCHAT_SERVER= +HIPCHAT_AUTH_TOKEN= + +# messagebird configs +MESSAGEBIRD_ACCESS_KEY= +MESSAGEBIRD_NUMBER= + +# kavenegar configs +KAVENEGAR_API_KEY= +KAVENEGAR_SENDER= + +# telegram configs +TELEGRAM_BOT_TOKEN= + +# kafka configs +SEND_KAFKA="YES" +KAFKA_URL= +KAFKA_SENDER_IP= + +# pagerduty.com configs +PD_SERVICE_KEY= + +# fleep.io configs +FLEEP_SENDER="${host}" + +# Amazon SNS configs +AWSSNS_MESSAGE_FORMAT= + +# syslog configs +SYSLOG_FACILITY= + +# email configs +EMAIL_SENDER= +EMAIL_CHARSET=$(locale charmap 2>/dev/null) +EMAIL_THREADING= + +# irc configs +IRC_NICKNAME= +IRC_REALNAME= +IRC_NETWORK= + +# load the stock and user configuration files +# these will overwrite the variables above + +if [ ${unittest} ]; then + if source "${cfgfile}"; then + error "Failed to load requested config file." + exit 1 + fi +else + for CONFIG in "${NETDATA_STOCK_CONFIG_DIR}/health_alarm_notify.conf" "${NETDATA_USER_CONFIG_DIR}/health_alarm_notify.conf"; do + if [ -f "${CONFIG}" ]; then + debug "Loading config file '${CONFIG}'..." + source "${CONFIG}" || error "Failed to load config file '${CONFIG}'." + else + warning "Cannot find file '${CONFIG}'." + fi + done +fi + +# If we didn't autodetect the character set for e-mail and it wasn't +# set by the user, we need to set it to a reasonable default. UTF-8 +# should be correct for almost all modern UNIX systems. +if [ -z ${EMAIL_CHARSET} ]; then + EMAIL_CHARSET="UTF-8" +fi + +# If we've been asked to use FQDN's for the URL's in the alarm, do so, +# unless we're sending an alarm for a slave system which we can't get the +# FQDN of easily. +if [ "${use_fqdn}" = "YES" ] && [ "${host}" = "$(hostname -s 2>/dev/null)" ]; then + host="$(hostname -f 2>/dev/null)" +fi + +# ----------------------------------------------------------------------------- +# filter a recipient based on alarm event severity + +filter_recipient_by_criticality() { + local method="${1}" x="${2}" r s + shift + + r="${x/|*/}" # the recipient + s="${x/*|/}" # the severity required for notifying this recipient + + # no severity filtering for this person + [ "${r}" = "${s}" ] && return 0 + + # the severity is invalid + s="${s^^}" + if [ "${s}" != "CRITICAL" ]; then + error "SEVERITY FILTERING for ${x} VIA ${method}: invalid severity '${s,,}', only 'critical' is supported." + return 0 + fi + + # create the status tracking directory for this user + [ ! -d "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}" ] && + mkdir -p "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}" + + case "${status}" in + CRITICAL) + # make sure he will get future notifications for this alarm too + touch "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" + debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: the alarm is CRITICAL (will now receive next status change)" + return 0 + ;; + + WARNING) + if [ -f "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" ]; then + # we do not remove the file, so that he will get future notifications of this alarm + debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: recipient has been notified for this alarm in the past (will still receive next status change)" + return 0 + fi + ;; + + *) + if [ -f "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" ]; then + # remove the file, so that he will only receive notifications for CRITICAL states for this alarm + rm "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" + debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: recipient has been notified for this alarm (will only receive CRITICAL notifications from now on)" + return 0 + fi + ;; + esac + + debug "SEVERITY FILTERING for ${x} VIA ${method}: BLOCK: recipient should not receive this notification" + return 1 +} + +# ----------------------------------------------------------------------------- +# verify the delivery methods supported + +# check slack +[ -z "${SLACK_WEBHOOK_URL}" ] && SEND_SLACK="NO" + +# check rocketchat +[ -z "${ROCKETCHAT_WEBHOOK_URL}" ] && SEND_ROCKETCHAT="NO" + +# check alerta +[ -z "${ALERTA_WEBHOOK_URL}" ] && SEND_ALERTA="NO" + +# check flock +[ -z "${FLOCK_WEBHOOK_URL}" ] && SEND_FLOCK="NO" + +# check discord +[ -z "${DISCORD_WEBHOOK_URL}" ] && SEND_DISCORD="NO" + +# check pushover +[ -z "${PUSHOVER_APP_TOKEN}" ] && SEND_PUSHOVER="NO" + +# check pushbullet +[ -z "${PUSHBULLET_ACCESS_TOKEN}" ] && SEND_PUSHBULLET="NO" + +# check twilio +{ [ -z "${TWILIO_ACCOUNT_TOKEN}" ] || [ -z "${TWILIO_ACCOUNT_SID}" ] || [ -z "${TWILIO_NUMBER}" ]; } && SEND_TWILIO="NO" + +# check hipchat +[ -z "${HIPCHAT_AUTH_TOKEN}" ] && SEND_HIPCHAT="NO" + +# check messagebird +{ [ -z "${MESSAGEBIRD_ACCESS_KEY}" ] || [ -z "${MESSAGEBIRD_NUMBER}" ]; } && SEND_MESSAGEBIRD="NO" + +# check kavenegar +{ [ -z "${KAVENEGAR_API_KEY}" ] || [ -z "${KAVENEGAR_SENDER}" ]; } && SEND_KAVENEGAR="NO" + +# check telegram +[ -z "${TELEGRAM_BOT_TOKEN}" ] && SEND_TELEGRAM="NO" + +# check kafka +{ [ -z "${KAFKA_URL}" ] || [ -z "${KAFKA_SENDER_IP}" ]; } && SEND_KAFKA="NO" + +# check irc +[ -z "${IRC_NETWORK}" ] && SEND_IRC="NO" + +# check fleep +#shellcheck disable=SC2153 +{ [ -z "${FLEEP_SERVER}" ] || [ -z "${FLEEP_SENDER}" ]; } && SEND_FLEEP="NO" + +if [ "${SEND_PUSHOVER}" = "YES" ] || + [ "${SEND_SLACK}" = "YES" ] || + [ "${SEND_ROCKETCHAT}" = "YES" ] || + [ "${SEND_ALERTA}" = "YES" ] || + [ "${SEND_PD}" = "YES" ] || + [ "${SEND_FLOCK}" = "YES" ] || + [ "${SEND_DISCORD}" = "YES" ] || + [ "${SEND_HIPCHAT}" = "YES" ] || + [ "${SEND_TWILIO}" = "YES" ] || + [ "${SEND_MESSAGEBIRD}" = "YES" ] || + [ "${SEND_KAVENEGAR}" = "YES" ] || + [ "${SEND_TELEGRAM}" = "YES" ] || + [ "${SEND_PUSHBULLET}" = "YES" ] || + [ "${SEND_KAFKA}" = "YES" ] || + [ "${SEND_FLEEP}" = "YES" ] || + [ "${SEND_PROWL}" = "YES" ] || + [ "${SEND_CUSTOM}" = "YES" ] || + [ "${SEND_MSTEAM}" = "YES" ]; then + # if we need curl, check for the curl command + if [ -z "${curl}" ]; then + curl="$(command -v curl 2>/dev/null)" + fi + if [ -z "${curl}" ]; then + error "Cannot find curl command in the system path. Disabling all curl based notifications." + SEND_PUSHOVER="NO" + SEND_PUSHBULLET="NO" + SEND_TELEGRAM="NO" + SEND_SLACK="NO" + SEND_MSTEAM="NO" + SEND_ROCKETCHAT="NO" + SEND_ALERTA="NO" + SEND_PD="NO" + SEND_FLOCK="NO" + SEND_DISCORD="NO" + SEND_TWILIO="NO" + SEND_HIPCHAT="NO" + SEND_MESSAGEBIRD="NO" + SEND_KAVENEGAR="NO" + SEND_KAFKA="NO" + SEND_FLEEP="NO" + SEND_PROWL="NO" + SEND_CUSTOM="NO" + fi +fi + +# if we need sendmail, check for the sendmail command +if [ "${SEND_EMAIL}" = "YES" ] && [ -z "${sendmail}" ]; then + sendmail="$(command -v sendmail 2>/dev/null)" + if [ -z "${sendmail}" ]; then + debug "Cannot find sendmail command in the system path. Disabling email notifications." + SEND_EMAIL="NO" + fi +fi + +# if we need logger, check for the logger command +if [ "${SEND_SYSLOG}" = "YES" ] && [ -z "${logger}" ]; then + logger="$(command -v logger 2>/dev/null)" + if [ -z "${logger}" ]; then + debug "Cannot find logger command in the system path. Disabling syslog notifications." + SEND_SYSLOG="NO" + fi +fi + +# if we need aws, check for the aws command +if [ "${SEND_AWSSNS}" = "YES" ] && [ -z "${aws}" ]; then + aws="$(command -v aws 2>/dev/null)" + if [ -z "${aws}" ]; then + debug "Cannot find aws command in the system path. Disabling Amazon SNS notifications." + SEND_AWSSNS="NO" + fi +fi + +# ----------------------------------------------------------------------------- +# find the recipients' addresses per method + +# netdata may call us with multiple roles, and roles may have multiple but +# overlapping recipients - so, here we find the unique recipients. +for method_name in ${method_names}; do + send_var="SEND_${method_name^^}" + if [ "${!send_var}" = "NO" ]; then + continue + fi + + declare -A arr_var=() + + for x in ${roles//,/ }; do + # the roles 'silent' and 'disabled' mean: + # don't send a notification for this role + if [ "${x}" = "silent" ] || [ "${x}" = "disabled" ]; then + continue + fi + + role_recipients="role_recipients_${method_name}[$x]" + default_recipient_var="DEFAULT_RECIPIENT_${method_name^^}" + + a="${!role_recipients}" + [ -z "${a}" ] && a="${!default_recipient_var}" + for r in ${a//,/ }; do + [ "${r}" != "disabled" ] && filter_recipient_by_criticality ${method_name} "${r}" && arr_var[${r/|*/}]="1" + done + done + + # build the list of recipients + to_var="to_${method_name}" + declare to_${method_name}="${!arr_var[*]}" + + [ -z "${!to_var}" ] && declare ${send_var}="NO" +done + +# ----------------------------------------------------------------------------- +# handle fixup of the email recipient list. + +fix_to_email() { + to_email= + while [ -n "${1}" ]; do + [ -n "${to_email}" ] && to_email="${to_email}, " + to_email="${to_email}${1}" + shift 1 + done +} + +# ${to_email} without quotes here +fix_to_email ${to_email} + +# ----------------------------------------------------------------------------- +# handle output if we're running in unit test mode +if [ ${unittest} ]; then + for method_name in ${method_names}; do + to_var="to_${method_name}" + echo "results: ${method_name}: ${!to_var}" + done + exit 0 +fi + +# ----------------------------------------------------------------------------- +# check that we have at least a method enabled +proceed=0 +for method in "${SEND_EMAIL}" \ + "${SEND_PUSHOVER}" \ + "${SEND_TELEGRAM}" \ + "${SEND_SLACK}" \ + "${SEND_ROCKETCHAT}" \ + "${SEND_ALERTA}" \ + "${SEND_FLOCK}" \ + "${SEND_DISCORD}" \ + "${SEND_TWILIO}" \ + "${SEND_HIPCHAT}" \ + "${SEND_MESSAGEBIRD}" \ + "${SEND_KAVENEGAR}" \ + "${SEND_PUSHBULLET}" \ + "${SEND_KAFKA}" \ + "${SEND_PD}" \ + "${SEND_FLEEP}" \ + "${SEND_CUSTOM}" \ + "${SEND_IRC}" \ + "${SEND_AWSSNS}" \ + "${SEND_SYSLOG}" \ + "${SEND_MSTEAM}"; do + if [ "${method}" == "YES" ]; then + proceed=1 + break + fi +done +if [ "$proceed" -eq 0 ]; then + fatal "All notification methods are disabled. Not sending notification for host '${host}', chart '${chart}' to '${roles}' for '${name}' = '${value}' for status '${status}'." +fi + +# ----------------------------------------------------------------------------- +# get the date the alarm happened + +date=$(date --date=@${when} "${date_format}" 2>/dev/null) +[ -z "${date}" ] && date=$(date "${date_format}" 2>/dev/null) +[ -z "${date}" ] && date=$(date --date=@${when} 2>/dev/null) +[ -z "${date}" ] && date=$(date 2>/dev/null) + +# ---------------------------------------------------------------------------- +# prepare some extra headers if we've been asked to thread e-mails +if [ "${SEND_EMAIL}" == "YES" ] && [ "${EMAIL_THREADING}" != "NO" ]; then + email_thread_headers="In-Reply-To: <${chart}-${name}@${host}>\\nReferences: <${chart}-${name}@${host}>" +else + email_thread_headers= +fi + +# ----------------------------------------------------------------------------- +# function to URL encode a string + +urlencode() { + local string="${1}" strlen encoded pos c o + + strlen=${#string} + for ((pos = 0; pos < strlen; pos++)); do + c=${string:pos:1} + case "${c}" in + [-_.~a-zA-Z0-9]) + o="${c}" + ;; + + *) + printf -v o '%%%02x' "'${c}" + ;; + esac + encoded+="${o}" + done + + REPLY="${encoded}" + echo "${REPLY}" +} + +# ----------------------------------------------------------------------------- +# function to convert a duration in seconds, to a human readable duration +# using DAYS, MINUTES, SECONDS + +duration4human() { + local s="${1}" d=0 h=0 m=0 ds="day" hs="hour" ms="minute" ss="second" ret + d=$((s / 86400)) + s=$((s - (d * 86400))) + h=$((s / 3600)) + s=$((s - (h * 3600))) + m=$((s / 60)) + s=$((s - (m * 60))) + + if [ ${d} -gt 0 ]; then + [ ${m} -ge 30 ] && h=$((h + 1)) + [ ${d} -gt 1 ] && ds="days" + [ ${h} -gt 1 ] && hs="hours" + if [ ${h} -gt 0 ]; then + ret="${d} ${ds} and ${h} ${hs}" + else + ret="${d} ${ds}" + fi + elif [ ${h} -gt 0 ]; then + [ ${s} -ge 30 ] && m=$((m + 1)) + [ ${h} -gt 1 ] && hs="hours" + [ ${m} -gt 1 ] && ms="minutes" + if [ ${m} -gt 0 ]; then + ret="${h} ${hs} and ${m} ${ms}" + else + ret="${h} ${hs}" + fi + elif [ ${m} -gt 0 ]; then + [ ${m} -gt 1 ] && ms="minutes" + [ ${s} -gt 1 ] && ss="seconds" + if [ ${s} -gt 0 ]; then + ret="${m} ${ms} and ${s} ${ss}" + else + ret="${m} ${ms}" + fi + else + [ ${s} -gt 1 ] && ss="seconds" + ret="${s} ${ss}" + fi + + REPLY="${ret}" + echo "${REPLY}" +} + +# ----------------------------------------------------------------------------- +# email sender + +send_email() { + local ret opts=() sender_email="${EMAIL_SENDER}" sender_name= + if [ "${SEND_EMAIL}" = "YES" ]; then + + if [ -n "${EMAIL_SENDER}" ]; then + if [[ ${EMAIL_SENDER} =~ ^\".*\"\ \<.*\>$ ]]; then + # the name includes double quotes + sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)" + sender_name="$(echo "${EMAIL_SENDER}" | cut -d '"' -f 2)" + elif [[ ${EMAIL_SENDER} =~ ^\'.*\'\ \<.*\>$ ]]; then + # the name includes single quotes + sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)" + sender_name="$(echo "${EMAIL_SENDER}" | cut -d "'" -f 2)" + elif [[ ${EMAIL_SENDER} =~ ^.*\ \<.*\>$ ]]; then + # the name does not have any quotes + sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)" + sender_name="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 1)" + fi + fi + + [ -n "${sender_email}" ] && opts+=(-f "${sender_email}") + [ -n "${sender_name}" ] && opts+=(-F "${sender_name}") + + if [ "${debug}" = "1" ]; then + echo >&2 "--- BEGIN sendmail command ---" + printf >&2 "%q " "${sendmail}" -t "${opts[@]}" + echo >&2 + echo >&2 "--- END sendmail command ---" + fi + + "${sendmail}" -t "${opts[@]}" + ret=$? + + if [ ${ret} -eq 0 ]; then + info "sent email notification for: ${host} ${chart}.${name} is ${status} to '${to_email}'" + return 0 + else + error "failed to send email notification for: ${host} ${chart}.${name} is ${status} to '${to_email}' with error code ${ret}." + return 1 + fi + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# pushover sender + +send_pushover() { + local apptoken="${1}" usertokens="${2}" when="${3}" url="${4}" status="${5}" title="${6}" message="${7}" httpcode sent=0 user priority + + if [ "${SEND_PUSHOVER}" = "YES" ] && [ -n "${apptoken}" ] && [ -n "${usertokens}" ] && [ -n "${title}" ] && [ -n "${message}" ]; then + + # https://pushover.net/api + priority=-2 + case "${status}" in + CLEAR) priority=-1 ;; # low priority: no sound or vibration + WARNING) priority=0 ;; # normal priority: respect quiet hours + CRITICAL) priority=1 ;; # high priority: bypass quiet hours + *) priority=-2 ;; # lowest priority: no notification at all + esac + + for user in ${usertokens}; do + httpcode=$(docurl \ + --form-string "token=${apptoken}" \ + --form-string "user=${user}" \ + --form-string "html=1" \ + --form-string "title=${title}" \ + --form-string "message=${message}" \ + --form-string "timestamp=${when}" \ + --form-string "url=${url}" \ + --form-string "url_title=Open netdata dashboard to view the alarm" \ + --form-string "priority=${priority}" \ + https://api.pushover.net/1/messages.json) + + if [ "${httpcode}" = "200" ]; then + info "sent pushover notification for: ${host} ${chart}.${name} is ${status} to '${user}'" + sent=$((sent + 1)) + else + error "failed to send pushover notification for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# pushbullet sender + +send_pushbullet() { + local userapikey="${1}" source_device="${2}" recipients="${3}" url="${4}" title="${5}" message="${6}" httpcode sent=0 user + if [ "${SEND_PUSHBULLET}" = "YES" ] && [ -n "${userapikey}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then + #https://docs.pushbullet.com/#create-push + for user in ${recipients}; do + httpcode=$(docurl \ + --header 'Access-Token: '${userapikey}'' \ + --header 'Content-Type: application/json' \ + --data-binary @<( + cat < from the message + message="${message///}" + message="${message//<\/small>/}" + + if [ "${SEND_HIPCHAT}" = "YES" ] && [ -n "${HIPCHAT_SERVER}" ] && [ -n "${authtoken}" ] && [ -n "${recipients}" ] && [ -n "${message}" ]; then + # Valid values: html, text. + # Defaults to 'html'. + msg_format="html" + + # Background color for message. Valid values: yellow, green, red, purple, gray, random. Defaults to 'yellow'. + case "${status}" in + WARNING) color="yellow" ;; + CRITICAL) color="red" ;; + CLEAR) color="green" ;; + *) color="gray" ;; + esac + + # Whether this message should trigger a user notification (change the tab color, play a sound, notify mobile phones, etc). + # Each recipient's notification preferences are taken into account. + # Defaults to false. + notify="true" + + for room in ${recipients}; do + httpcode=$(docurl -X POST \ + -H "Content-type: application/json" \ + -H "Authorization: Bearer ${authtoken}" \ + -d "{\"color\": \"${color}\", \"from\": \"${host}\", \"message_format\": \"${msg_format}\", \"message\": \"${message}\", \"notify\": \"${notify}\"}" \ + "https://${HIPCHAT_SERVER}/v2/room/${room}/notification") + + if [ "${httpcode}" = "204" ]; then + info "sent HipChat notification for: ${host} ${chart}.${name} is ${status} to '${room}'" + sent=$((sent + 1)) + else + error "failed to send HipChat notification for: ${host} ${chart}.${name} is ${status} to '${room}' with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# messagebird sender + +send_messagebird() { + local accesskey="${1}" messagebirdnumber="${2}" recipients="${3}" title="${4}" message="${5}" httpcode sent=0 user + if [ "${SEND_MESSAGEBIRD}" = "YES" ] && [ -n "${accesskey}" ] && [ -n "${messagebirdnumber}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then + #https://developers.messagebird.com/docs/messaging + for user in ${recipients}; do + httpcode=$(docurl -X POST \ + --data-urlencode "originator=${messagebirdnumber}" \ + --data-urlencode "recipients=${user}" \ + --data-urlencode "body=${title} ${message}" \ + --data-urlencode "datacoding=auto" \ + -H "Authorization: AccessKey ${accesskey}" \ + "https://rest.messagebird.com/messages") + + if [ "${httpcode}" = "201" ]; then + info "sent Messagebird SMS for: ${host} ${chart}.${name} is ${status} to '${user}'" + sent=$((sent + 1)) + else + error "failed to send Messagebird SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# kavenegar sender + +send_kavenegar() { + local API_KEY="${1}" kavenegarsender="${2}" recipients="${3}" title="${4}" message="${5}" httpcode sent=0 user + if [ "${SEND_KAVENEGAR}" = "YES" ] && [ -n "${API_KEY}" ] && [ -n "${kavenegarsender}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then + # http://api.kavenegar.com/v1/{API-KEY}/sms/send.json + for user in ${recipients}; do + httpcode=$(docurl -X POST http://api.kavenegar.com/v1/${API_KEY}/sms/send.json \ + --data-urlencode "sender=${kavenegarsender}" \ + --data-urlencode "receptor=${user}" \ + --data-urlencode "message=${title} ${message}") + + if [ "${httpcode}" = "200" ]; then + info "sent Kavenegar SMS for: ${host} ${chart}.${name} is ${status} to '${user}'" + sent=$((sent + 1)) + else + error "failed to send Kavenegar SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# telegram sender + +send_telegram() { + local bottoken="${1}" chatids="${2}" message="${3}" httpcode sent=0 chatid emoji disableNotification="" + + if [ "${status}" = "CLEAR" ]; then disableNotification="--data-urlencode disable_notification=true"; fi + + case "${status}" in + WARNING) emoji="⚠️" ;; + CRITICAL) emoji="🔴" ;; + CLEAR) emoji="✅" ;; + *) emoji="⚪️" ;; + esac + + if [ "${SEND_TELEGRAM}" = "YES" ] && [ -n "${bottoken}" ] && [ -n "${chatids}" ] && [ -n "${message}" ]; then + for chatid in ${chatids}; do + # https://core.telegram.org/bots/api#sendmessage + httpcode=$(docurl ${disableNotification} \ + --data-urlencode "parse_mode=HTML" \ + --data-urlencode "disable_web_page_preview=true" \ + --data-urlencode "text=${emoji} ${message}" \ + "https://api.telegram.org/bot${bottoken}/sendMessage?chat_id=${chatid}") + + if [ "${httpcode}" = "200" ]; then + info "sent telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}'" + sent=$((sent + 1)) + elif [ "${httpcode}" = "401" ]; then + error "failed to send telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}': Wrong bot token." + else + error "failed to send telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}' with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + fi + + return 1 +} + +# ----------------------------------------------------------------------------- +# Microsoft Team sender + +send_msteam() { + + local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload + + [ "${SEND_MSTEAM}" != "YES" ] && return 1 + + case "${status}" in + WARNING) icon="${MSTEAM_ICON_WARNING}" && color="${MSTEAM_COLOR_WARNING}" ;; + CRITICAL) icon="${MSTEAM_ICON_CRITICAL}" && color="${MSTEAM_COLOR_CRITICAL}" ;; + CLEAR) icon="${MSTEAM_ICON_CLEAR}" && color="${MSTEAM_COLOR_CLEAR}" ;; + *) icon="${MSTEAM_ICON_DEFAULT}" && color="${MSTEAM_COLOR_DEFAULT}" ;; + esac + + for channel in ${channels}; do + ## More details are available here regarding the payload syntax options : https://docs.microsoft.com/en-us/outlook/actionable-messages/message-card-reference + ## Online designer : https://acdesignerbeta.azurewebsites.net/ + payload="$( + cat <", + "ts": ${when} + } + ] + } +EOF + )" + + httpcode=$(docurl -X POST --data-urlencode "payload=${payload}" "${webhook}") + if [ "${httpcode}" = "200" ]; then + info "sent slack notification for: ${host} ${chart}.${name} is ${status} ${chstr}" + sent=$((sent + 1)) + else + error "failed to send slack notification for: ${host} ${chart}.${name} is ${status} ${chstr}, with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + + return 1 +} + +# ----------------------------------------------------------------------------- +# rocketchat sender + +send_rocketchat() { + local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload + + [ "${SEND_ROCKETCHAT}" != "YES" ] && return 1 + + case "${status}" in + WARNING) color="warning" ;; + CRITICAL) color="danger" ;; + CLEAR) color="good" ;; + *) color="#777777" ;; + esac + + for channel in ${channels}; do + payload="$( + cat <View Netdata" + }, + "origin": "netdata/${host}", + "type": "netdataAlarm", + "rawData": "${BASH_ARGV[@]}" + } +EOF + )" + + if [ -n "${ALERTA_API_KEY}" ]; then + auth="Key ${ALERTA_API_KEY}" + fi + + httpcode=$(docurl -X POST "${webhook}/alert" -H "Content-Type: application/json" -H "Authorization: $auth" --data "${payload}") + + if [ "${httpcode}" = "200" ] || [ "${httpcode}" = "201" ]; then + info "sent alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}'" + sent=$((sent + 1)) + elif [ "${httpcode}" = "202" ]; then + info "suppressed alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}'" + else + error "failed to send alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + + return 1 +} + +# ----------------------------------------------------------------------------- +# flock sender + +send_flock() { + local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload + + [ "${SEND_FLOCK}" != "YES" ] && return 1 + + case "${status}" in + WARNING) color="warning" ;; + CRITICAL) color="danger" ;; + CLEAR) color="good" ;; + *) color="#777777" ;; + esac + + for channel in ${channels}; do + httpcode=$(docurl -X POST "${webhook}" -H "Content-Type: application/json" -d "{ + \"sendAs\": { + \"name\" : \"netdata on ${host}\", + \"profileImage\" : \"${images_base_url}/images/banner-icon-144x144.png\" + }, + \"text\": \"${host} *${status_message}*\", + \"timestamp\": \"${when}\", + \"attachments\": [ + { + \"description\": \"${chart} (${family}) - ${info}\", + \"color\": \"${color}\", + \"title\": \"${alarm}\", + \"url\": \"${goto_url}\", + \"text\": \"${info}\", + \"views\": { + \"image\": { + \"original\": { \"src\": \"${image}\", \"width\": 400, \"height\": 400 }, + \"thumbnail\": { \"src\": \"${image}\", \"width\": 50, \"height\": 50 }, + \"filename\": \"${image}\" + } + } + } + ] + }") + if [ "${httpcode}" = "200" ]; then + info "sent flock notification for: ${host} ${chart}.${name} is ${status} to '${channel}'" + sent=$((sent + 1)) + else + error "failed to send flock notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}." + fi + done + + [ ${sent} -gt 0 ] && return 0 + + return 1 +} + +# ----------------------------------------------------------------------------- +# discord sender + +send_discord() { + local webhook="${1}/slack" channels="${2}" httpcode sent=0 channel color payload username + + [ "${SEND_DISCORD}" != "YES" ] && return 1 + + case "${status}" in + WARNING) color="warning" ;; + CRITICAL) color="danger" ;; + CLEAR) color="good" ;; + *) color="#777777" ;; + esac + + for channel in ${channels}; do + username="netdata on ${host}" + [ ${#username} -gt 32 ] && username="${username:0:29}..." + + payload="$( + cat </dev/null; then + info "sent Amazon SNS notification for: ${host} ${chart}.${name} is ${status} to '${target}'" + sent=$((sent + 1)) + else + error "failed to send Amazon SNS notification for: ${host} ${chart}.${name} is ${status} to '${target}'" + fi + done + + [ ${sent} -gt 0 ] && return 0 + + return 1 +} + +# ----------------------------------------------------------------------------- +# syslog sender + +send_syslog() { + local facility=${SYSLOG_FACILITY:-"local6"} level='info' targets="${1}" + local priority='' message='' host='' port='' prefix='' + local temp1='' temp2='' + + [ "${SEND_SYSLOG}" = "YES" ] || return 1 + + if [ "${status}" = "CRITICAL" ]; then + level='crit' + elif [ "${status}" = "WARNING" ]; then + level='warning' + fi + + for target in ${targets}; do + priority="${facility}.${level}" + message='' + host='' + port='' + prefix='' + temp1='' + temp2='' + + prefix=$(echo ${target} | cut -d '/' -f 2) + temp1=$(echo ${target} | cut -d '/' -f 1) + + if [ ${prefix} != ${temp1} ]; then + if (echo ${temp1} | grep -q '@'); then + temp2=$(echo ${temp1} | cut -d '@' -f 1) + host=$(echo ${temp1} | cut -d '@' -f 2) + + if [ ${temp2} != ${host} ]; then + priority=${temp2} + fi + + port=$(echo ${host} | rev | cut -d ':' -f 1 | rev) + + if (echo ${host} | grep -E -q '\[.*\]'); then + if (echo ${port} | grep -q ']'); then + port='' + else + host=$(echo ${host} | rev | cut -d ':' -f 2- | rev) + fi + else + if [ ${port} = ${host} ]; then + port='' + else + host=$(echo ${host} | cut -d ':' -f 1) + fi + fi + else + priority=${temp1} + fi + fi + + message="${prefix} ${status} on ${host} at ${date}: ${chart} ${value_string}" + + if [ ${host} ]; then + logger_options="${logger_options} -n ${host}" + if [ ${port} ]; then + logger_options="${logger_options} -P ${port}" + fi + fi + + ${logger} -p ${priority} ${logger_options} "${message}" + done + + return $? +} + +# ----------------------------------------------------------------------------- +# prepare the content of the notification + +# the url to send the user on click +urlencode "${args_host}" >/dev/null +url_host="${REPLY}" +urlencode "${chart}" >/dev/null +url_chart="${REPLY}" +urlencode "${family}" >/dev/null +url_family="${REPLY}" +urlencode "${name}" >/dev/null +url_name="${REPLY}" + +redirect_params="host=${url_host}&chart=${url_chart}&family=${url_family}&alarm=${url_name}&alarm_unique_id=${unique_id}&alarm_id=${alarm_id}&alarm_event_id=${event_id}" +GOTOCLOUD=0 + +if [ "${NETDATA_REGISTRY_URL}" == "https://registry.my-netdata.io" ]; then + if [ -z "${NETDATA_REGISTRY_UNIQUE_ID}" ]; then + if [ -f "/var/lib/netdata/registry/netdata.public.unique.id" ]; then + NETDATA_REGISTRY_UNIQUE_ID="$(cat "/var/lib/netdata/registry/netdata.public.unique.id")" + fi + fi + if [ ! -z "${NETDATA_REGISTRY_UNIQUE_ID}" ]; then + GOTOCLOUD=1 + fi +fi + +if [ ${GOTOCLOUD} -eq 0 ]; then + goto_url="${NETDATA_REGISTRY_URL}/goto-host-from-alarm.html?${redirect_params}" +else + goto_url="https://netdata.cloud/alarms/redirect?agentID=${NETDATA_REGISTRY_UNIQUE_ID}&${redirect_params}" +fi + +# the severity of the alarm +severity="${status}" + +# the time the alarm was raised +duration4human ${duration} >/dev/null +duration_txt="${REPLY}" +duration4human ${non_clear_duration} >/dev/null +non_clear_duration_txt="${REPLY}" +raised_for="(was ${old_status,,} for ${duration_txt})" + +# the key status message +status_message="status unknown" + +# the color of the alarm +color="grey" + +# the alarm value +alarm="${name//_/ } = ${value_string}" + +# the image of the alarm +image="${images_base_url}/images/banner-icon-144x144.png" + +# prepare the title based on status +case "${status}" in +CRITICAL) + image="${images_base_url}/images/alert-128-red.png" + status_message="is critical" + color="#ca414b" + ;; + +WARNING) + image="${images_base_url}/images/alert-128-orange.png" + status_message="needs attention" + color="#ffc107" + ;; + +CLEAR) + image="${images_base_url}/images/check-mark-2-128-green.png" + status_message="recovered" + color="#77ca6d" + ;; +esac + +if [ "${status}" = "CLEAR" ]; then + severity="Recovered from ${old_status}" + if [ ${non_clear_duration} -gt ${duration} ]; then + raised_for="(alarm was raised for ${non_clear_duration_txt})" + fi + + # don't show the value when the status is CLEAR + # for certain alarms, this value might not have any meaning + alarm="${name//_/ } ${raised_for}" + +elif { [ "${old_status}" = "WARNING" ] && [ "${status}" = "CRITICAL" ]; }; then + severity="Escalated to ${status}" + if [ ${non_clear_duration} -gt ${duration} ]; then + raised_for="(alarm is raised for ${non_clear_duration_txt})" + fi + +elif { [ "${old_status}" = "CRITICAL" ] && [ "${status}" = "WARNING" ]; }; then + severity="Demoted to ${status}" + if [ ${non_clear_duration} -gt ${duration} ]; then + raised_for="(alarm is raised for ${non_clear_duration_txt})" + fi + +else + raised_for= +fi + +# prepare HTML versions of elements +info_html= +[ -n "${info}" ] && info_html="
${info}" + +raised_for_html= +[ -n "${raised_for}" ] && raised_for_html="
${raised_for}" + +# ----------------------------------------------------------------------------- +# send the slack notification + +# slack aggregates posts from the same username +# so we use "${host} ${status}" as the bot username, to make them diff + +send_slack "${SLACK_WEBHOOK_URL}" "${to_slack}" +SENT_SLACK=$? + +# ----------------------------------------------------------------------------- +# send the Microsoft notification + +# Microsoft team aggregates posts from the same username +# so we use "${host} ${status}" as the bot username, to make them diff + +send_msteam "${MSTEAM_WEBHOOK_URL}" "${to_msteam}" +SENT_MSTEAM=$? + +# ----------------------------------------------------------------------------- +# send the rocketchat notification + +# rocketchat aggregates posts from the same username +# so we use "${host} ${status}" as the bot username, to make them diff + +send_rocketchat "${ROCKETCHAT_WEBHOOK_URL}" "${to_rocketchat}" +SENT_ROCKETCHAT=$? + +# ----------------------------------------------------------------------------- +# send the alerta notification + +# alerta aggregates posts from the same username +# so we use "${host} ${status}" as the bot username, to make them diff + +send_alerta "${ALERTA_WEBHOOK_URL}" "${to_alerta}" +SENT_ALERTA=$? + +# ----------------------------------------------------------------------------- +# send the flock notification + +# flock aggregates posts from the same username +# so we use "${host} ${status}" as the bot username, to make them diff + +send_flock "${FLOCK_WEBHOOK_URL}" "${to_flock}" +SENT_FLOCK=$? + +# ----------------------------------------------------------------------------- +# send the discord notification + +# discord aggregates posts from the same username +# so we use "${host} ${status}" as the bot username, to make them diff + +send_discord "${DISCORD_WEBHOOK_URL}" "${to_discord}" +SENT_DISCORD=$? + +# ----------------------------------------------------------------------------- +# send the pushover notification + +send_pushover "${PUSHOVER_APP_TOKEN}" "${to_pushover}" "${when}" "${goto_url}" "${status}" "${host} ${status_message} - ${name//_/ } - ${chart}" " +${alarm}${info_html}
  +${chart}
Chart
  +${family}
Family
  +${severity}
Severity
  +${date}${raised_for_html}
Time
  +View Netdata
  +The source of this alarm is line ${src} +" + +SENT_PUSHOVER=$? + +# ----------------------------------------------------------------------------- +# send the pushbullet notification + +send_pushbullet "${PUSHBULLET_ACCESS_TOKEN}" "${PUSHBULLET_SOURCE_DEVICE}" "${to_pushbullet}" "${goto_url}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}\\n +Severity: ${severity}\\n +Chart: ${chart}\\n +Family: ${family}\\n +$(date -d @${when})\\n +The source of this alarm is line ${src}" + +SENT_PUSHBULLET=$? + +# ----------------------------------------------------------------------------- +# send the twilio SMS + +send_twilio "${TWILIO_ACCOUNT_SID}" "${TWILIO_ACCOUNT_TOKEN}" "${TWILIO_NUMBER}" "${to_twilio}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm} +Severity: ${severity} +Chart: ${chart} +Family: ${family} +${info}" + +SENT_TWILIO=$? + +# ----------------------------------------------------------------------------- +# send the messagebird SMS + +send_messagebird "${MESSAGEBIRD_ACCESS_KEY}" "${MESSAGEBIRD_NUMBER}" "${to_messagebird}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm} +Severity: ${severity} +Chart: ${chart} +Family: ${family} +${info}" + +SENT_MESSAGEBIRD=$? + +# ----------------------------------------------------------------------------- +# send the kavenegar SMS + +send_kavenegar "${KAVENEGAR_API_KEY}" "${KAVENEGAR_SENDER}" "${to_kavenegar}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm} +Severity: ${severity} +Chart: ${chart} +Family: ${family} +${info}" + +SENT_KAVENEGAR=$? + +# ----------------------------------------------------------------------------- +# send the telegram.org message + +# https://core.telegram.org/bots/api#formatting-options +send_telegram "${TELEGRAM_BOT_TOKEN}" "${to_telegram}" "${host} ${status_message} - ${name//_/ } +${chart} (${family}) +${alarm} +${info}" + +SENT_TELEGRAM=$? + +# ----------------------------------------------------------------------------- +# send the kafka message + +send_kafka +SENT_KAFKA=$? + +# ----------------------------------------------------------------------------- +# send the pagerduty.com message + +send_pd "${to_pd}" +SENT_PD=$? + +# ----------------------------------------------------------------------------- +# send the fleep message + +send_fleep "${to_fleep}" +SENT_FLEEP=$? + +# ----------------------------------------------------------------------------- +# send the Prowl message + +send_prowl "${to_prowl}" +SENT_PROWL=$? + +# ----------------------------------------------------------------------------- +# send the irc message + +send_irc "${IRC_NICKNAME}" "${IRC_REALNAME}" "${to_irc}" "${IRC_NETWORK}" "${host}" "${host} ${status_message} - ${name//_/ } - ${chart} ----- ${alarm} +Severity: ${severity} +Chart: ${chart} +Family: ${family} +${info}" + +SENT_IRC=$? + +# ----------------------------------------------------------------------------- +# send the custom message + +send_custom() { + # is it enabled? + [ "${SEND_CUSTOM}" != "YES" ] && return 1 + + # do we have any sender? + [ -z "${1}" ] && return 1 + + # call the custom_sender function + custom_sender "${@}" +} + +send_custom "${to_custom}" +SENT_CUSTOM=$? + +# ----------------------------------------------------------------------------- +# send hipchat message + +send_hipchat "${HIPCHAT_AUTH_TOKEN}" "${to_hipchat}" " \ +${host} ${status_message}
\ +${alarm} ${info_html}
\ +${chart} (family ${family})
\ +${date}${raised_for_html}
\ +View netdata dashboard \ +(source of alarm ${src}) \ +" + +SENT_HIPCHAT=$? + +# ----------------------------------------------------------------------------- +# send the Amazon SNS message + +send_awssns "${to_awssns}" + +SENT_AWSSNS=$? + +# ----------------------------------------------------------------------------- +# send the syslog message + +send_syslog "${to_syslog}" + +SENT_SYSLOG=$? + +# ----------------------------------------------------------------------------- +# send the email + +send_email < + + + + + + + + + +
+
+ + + + + + + + + + + + +
+
netdata notification
+
+

${host} ${status_message}

+
+
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ ${chart} + Chart +
+ ${alarm}${info_html} + Alarm +
+ ${family} + Family +
+ ${severity} + Severity +
${date} + ${raised_for_html} Time +
+ ${calc_expression} + Evaluated Expression +
+ ${calc_param_values} + Expression Variables +
+ The host has ${total_warnings} WARNING and ${total_critical} CRITICAL alarm(s) raised. +
+ View Netdata +
The source of this alarm is line ${src}
(alarms are configurable, edit this file to adapt the alarm to your needs) +
Sent by + netdata, the real-time performance and health monitoring, on ${host}. +
+
+
+
+
+ + +--multipart-boundary-- +EOF + +SENT_EMAIL=$? + +# ----------------------------------------------------------------------------- +# let netdata know +for state in "${SENT_EMAIL}" \ + "${SENT_PUSHOVER}" \ + "${SENT_TELEGRAM}" \ + "${SENT_SLACK}" \ + "${SENT_ROCKETCHAT}" \ + "${SENT_ALERTA}" \ + "${SENT_FLOCK}" \ + "${SENT_DISCORD}" \ + "${SENT_TWILIO}" \ + "${SENT_HIPCHAT}" \ + "${SENT_MESSAGEBIRD}" \ + "${SENT_KAVENEGAR}" \ + "${SENT_PUSHBULLET}" \ + "${SENT_KAFKA}" \ + "${SENT_PD}" \ + "${SENT_FLEEP}" \ + "${SENT_PROWL}" \ + "${SENT_CUSTOM}" \ + "${SENT_IRC}" \ + "${SENT_AWSSNS}" \ + "${SENT_SYSLOG}" \ + "${SENT_MSTEAM}"; do + if [ "${state}" -eq 0 ]; then + # we sent something + exit 0 + fi +done +# we did not send anything +exit 1 diff --git a/health/notifications/prowl/Makefile.inc b/health/notifications/prowl/Makefile.inc deleted file mode 100644 index 08e4c2e54..000000000 --- a/health/notifications/prowl/Makefile.inc +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-3.0-or-later - -# THIS IS NOT A COMPLETE Makefile -# IT IS INCLUDED BY ITS PARENT'S Makefile.am -# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT - -# install these files -dist_noinst_DATA += \ - prowl/README.md \ - prowl/Makefile.inc \ - $(NULL) - diff --git a/health/notifications/prowl/README.md b/health/notifications/prowl/README.md deleted file mode 100644 index 1f060edcf..000000000 --- a/health/notifications/prowl/README.md +++ /dev/null @@ -1,22 +0,0 @@ -# prowl - -(Prowl)[1] is a push notification service for iOS devices. Netdata -supprots delivering notifications to iOS devices through Prowl. - -Because of how Netdata integrates with Prowl, there is a hard limit of -at most 1000 notifications per hour (starting from the first notification -sent). Any alerts beyond the first thousand in an hour will be dropped. - -Warning messages will be sent with the 'High' priority, critical messages -will be sent with the 'Emergency' priority, and all other messages will -be sent with the normal priority. Opening the notification's associated -URL will take you to the Netdata dashboard of the system that issued -the alert, directly to the chart that it triggered on. - -## configuration - -To use this, you will need a Prowl API key, which can be rquested through -the Prowl website after registering. - -Once you have an API key, simply specify that as a recipient for Prowl -notifications. -- cgit v1.2.3