From 1746898cefcb17f58b5cf27b4dad3d28236f1152 Mon Sep 17 00:00:00 2001 From: Lennart Weller Date: Mon, 5 Sep 2016 10:27:21 +0200 Subject: Imported Upstream version 1.3.0+dfsg --- plugins.d/charts.d.plugin | 789 ++++++++++++++++++++++++---------------------- 1 file changed, 418 insertions(+), 371 deletions(-) (limited to 'plugins.d/charts.d.plugin') diff --git a/plugins.d/charts.d.plugin b/plugins.d/charts.d.plugin index 2824fa3c6..9aaadc168 100755 --- a/plugins.d/charts.d.plugin +++ b/plugins.d/charts.d.plugin @@ -1,4 +1,4 @@ -#!/bin/bash +#!/usr/bin/env bash PROGRAM_FILE="$0" PROGRAM_NAME="$(basename $0)" @@ -14,24 +14,24 @@ echo >&2 "$PROGRAM_NAME: started from '$PROGRAM_FILE' with options: $*" if [ $(( ${BASH_VERSINFO[0]} )) -lt 4 ] then - echo >&2 - echo >&2 "$PROGRAM_NAME: ERROR" - echo >&2 "BASH version 4 or later is required." - echo >&2 "You are running version: ${BASH_VERSION}" - echo >&2 "Please upgrade." - echo >&2 - exit 1 + echo >&2 + echo >&2 "$PROGRAM_NAME: ERROR" + echo >&2 "BASH version 4 or later is required." + echo >&2 "You are running version: ${BASH_VERSION}" + echo >&2 "Please upgrade." + echo >&2 + exit 1 fi # check a few commands require_cmd() { - which "$1" >/dev/null - if [ $? -ne 0 ] - then - echo >&2 "$PROGRAM_NAME: ERROR: Command '$1' is not found in the system path." - return 1 - fi - return 0 + which "$1" >/dev/null + if [ $? -ne 0 ] + then + echo >&2 "$PROGRAM_NAME: ERROR: Command '$1' is not found in the system path." + return 1 + fi + return 0 } require_cmd date || exit 1 @@ -61,7 +61,7 @@ chartsd="$pluginsd/../charts.d" myconfig="$confd/$PROGRAM_NAME.conf" minimum_update_frequency="${NETDATA_UPDATE_EVERY-1}" -update_every=${minimum_update_frequency} # this will be overwritten by the command line +update_every=${minimum_update_frequency} # this will be overwritten by the command line # work around for non BASH shells charts_create="_create" @@ -106,50 +106,50 @@ check=0 chart_only= while [ ! -z "$1" ] do - if [ "$1" = "check" ] - then - check=1 - shift - continue - fi - - if [ "$1" = "debug" -o "$1" = "all" ] - then - debug=1 - shift - continue - fi - - if [ -f "$chartsd/$1.chart.sh" ] - then - debug=1 - chart_only="$( echo $1.chart.sh | sed "s/\.chart\.sh$//g" )" - shift - continue - fi - - if [ -f "$chartsd/$1" ] - then - debug=1 - chart_only="$( echo $1 | sed "s/\.chart\.sh$//g" )" - shift - continue - fi - - # number check - n="$1" - x=$(( n )) - if [ "$x" = "$n" ] - then - shift - update_every=$x - [ $update_every -lt $minimum_update_frequency ] && update_every=$minimum_update_frequency - continue - fi - - echo >&2 "Cannot understand parameter $1. Aborting." - echo "DISABLE" - exit 1 + if [ "$1" = "check" ] + then + check=1 + shift + continue + fi + + if [ "$1" = "debug" -o "$1" = "all" ] + then + debug=1 + shift + continue + fi + + if [ -f "$chartsd/$1.chart.sh" ] + then + debug=1 + chart_only="$( echo $1.chart.sh | sed "s/\.chart\.sh$//g" )" + shift + continue + fi + + if [ -f "$chartsd/$1" ] + then + debug=1 + chart_only="$( echo $1 | sed "s/\.chart\.sh$//g" )" + shift + continue + fi + + # number check + n="$1" + x=$(( n )) + if [ "$x" = "$n" ] + then + shift + update_every=$x + [ $update_every -lt $minimum_update_frequency ] && update_every=$minimum_update_frequency + continue + fi + + echo >&2 "Cannot understand parameter $1. Aborting." + echo "DISABLE" + exit 1 done @@ -157,26 +157,26 @@ done # load my configuration if [ -f "$myconfig" ] - then - . "$myconfig" - if [ $? -ne 0 ] - then - echo >&2 "$PROGRAM_NAME: cannot load $myconfig" - echo "DISABLE" - exit 1 - fi - time_divisor=$((time_divisor)) - [ $time_divisor -lt 10 ] && time_divisor=10 - [ $time_divisor -gt 100 ] && time_divisor=100 + then + . "$myconfig" + if [ $? -ne 0 ] + then + echo >&2 "$PROGRAM_NAME: cannot load $myconfig" + echo "DISABLE" + exit 1 + fi + time_divisor=$((time_divisor)) + [ $time_divisor -lt 10 ] && time_divisor=10 + [ $time_divisor -gt 100 ] && time_divisor=100 else - echo >&2 "$PROGRAM_NAME: configuration file '$myconfig' not found. Using defaults." + echo >&2 "$PROGRAM_NAME: configuration file '$myconfig' not found. Using defaults." fi if [ "$pause_method" = "suspend" ] then - # enable bash job control - # this is required for suspend to work - set -m + # enable bash job control + # this is required for suspend to work + set -m fi # we check for the timeout command, after we load our @@ -185,22 +185,22 @@ fi # can emulate the timeout command we need: # > timeout SECONDS command ... if [ $check_for_timeout -eq 1 ] - then - require_cmd timeout || exit 1 + then + require_cmd timeout || exit 1 fi # ----------------------------------------------------------------------------- # internal checks # netdata passes the requested update frequency as the first argument -update_every=$(( update_every + 1 - 1)) # makes sure it is a number +update_every=$(( update_every + 1 - 1)) # makes sure it is a number test $update_every -eq 0 && update_every=1 # if it is zero, make it 1 # check the charts.d directory if [ ! -d "$chartsd" ] - then - echo >&2 "$PROGRAM_NAME: cannot find charts directory '$chartsd'" - echo "DISABLE" + then + echo >&2 "$PROGRAM_NAME: cannot find charts directory '$chartsd'" + echo "DISABLE" fi @@ -210,13 +210,13 @@ fi # default sleep function LOOPSLEEPMS_HIGHRES=0 loopsleepms() { - [ "$1" = "tellwork" ] && shift - sleep $1 + [ "$1" = "tellwork" ] && shift + sleep $1 } now_ms= current_time_ms() { - now_ms="$(date +'%s')000" + now_ms="$(date +'%s')000" } # if found and included, this file overwrites loopsleepms() @@ -229,10 +229,10 @@ current_time_ms() { # library functions fixid() { - echo "$*" |\ - tr -c "[A-Z][a-z][0-9]" "_" |\ - sed -e "s|^_\+||g" -e "s|_\+$||g" -e "s|_\+|_|g" |\ - tr "[A-Z]" "[a-z]" + echo "$*" |\ + tr -c "[A-Z][a-z][0-9]" "_" |\ + sed -e "s|^_\+||g" -e "s|_\+$||g" -e "s|_\+|_|g" |\ + tr "[A-Z]" "[a-z]" } # convert any floating point number @@ -241,57 +241,57 @@ fixid() { # so that no fork is necessary # the multiplier must be a power of 10 float2int() { - local f m="$2" a b l v=($1) - f=${v[0]} - - # echo >&2 "value='${1}' f='${f}', m='${m}'" - - # the length of the multiplier - 1 - l=$(( ${#m} - 1 )) - - # check if the number is in scientific notation - if [[ ${f} =~ ^[[:space:]]*(-)?[0-9.]+(e|E)(\+|-)[0-9]+ ]] - then - # convert it to decimal - # unfortunately, this fork cannot be avoided - # if you know of a way to avoid it, please let me know - f=$(printf "%0.${l}f" ${f}) - fi - - # split the floating point number - # in integer (a) and decimal (b) - a=${f/.*/} - b=${f/*./} - - # if the integer part is missing - # set it to zero - [ -z "${a}" ] && a="0" - - # strip leading zeros from the integer part - # base 10 convertion - a=$((10#$a)) - - # check the length of the decimal part - # against the length of the multiplier - if [ ${#b} -gt ${l} ] - then - # too many digits - take the most significant - b=${b:0:${l}} - - elif [ ${#b} -lt ${l} ] - then - # too few digits - pad with zero on the right - local z="00000000000000000000000" r=$((l - ${#b})) - b="${b}${z:0:${r}}" - fi - - # strip leading zeros from the decimal part - # base 10 convertion - b=$((10#$b)) - - # store the result - FLOAT2INT_RESULT=$(( (a * m) + b )) - #echo >&2 "FLOAT2INT_RESULT='${FLOAT2INT_RESULT}'" + local f m="$2" a b l v=($1) + f=${v[0]} + + # echo >&2 "value='${1}' f='${f}', m='${m}'" + + # the length of the multiplier - 1 + l=$(( ${#m} - 1 )) + + # check if the number is in scientific notation + if [[ ${f} =~ ^[[:space:]]*(-)?[0-9.]+(e|E)(\+|-)[0-9]+ ]] + then + # convert it to decimal + # unfortunately, this fork cannot be avoided + # if you know of a way to avoid it, please let me know + f=$(printf "%0.${l}f" ${f}) + fi + + # split the floating point number + # in integer (a) and decimal (b) + a=${f/.*/} + b=${f/*./} + + # if the integer part is missing + # set it to zero + [ -z "${a}" ] && a="0" + + # strip leading zeros from the integer part + # base 10 convertion + a=$((10#$a)) + + # check the length of the decimal part + # against the length of the multiplier + if [ ${#b} -gt ${l} ] + then + # too many digits - take the most significant + b=${b:0:${l}} + + elif [ ${#b} -lt ${l} ] + then + # too few digits - pad with zero on the right + local z="00000000000000000000000" r=$((l - ${#b})) + b="${b}${z:0:${r}}" + fi + + # strip leading zeros from the decimal part + # base 10 convertion + b=$((10#$b)) + + # store the result + FLOAT2INT_RESULT=$(( (a * m) + b )) + #echo >&2 "FLOAT2INT_RESULT='${FLOAT2INT_RESULT}'" } @@ -299,84 +299,105 @@ float2int() { # charts check functions all_charts() { - cd "$chartsd" - [ $? -ne 0 ] && echo >&2 "$PROGRAM_NAME: Cannot cd to $chartsd" && return 1 + cd "$chartsd" + [ $? -ne 0 ] && echo >&2 "$PROGRAM_NAME: Cannot cd to $chartsd" && return 1 - ls *.chart.sh | sed "s/\.chart\.sh$//g" + ls *.chart.sh | sed "s/\.chart\.sh$//g" } +declare -A charts_enable_keyword=( + ['apache']="force" + ['cpu_apps']="force" + ['cpufreq']="force" + ['example']="force" + ['exim']="force" + ['hddtemp']="force" + ['load_average']="force" + ['mem_apps']="force" + ['mysql']="force" + ['nginx']="force" + ['phpfpm']="force" + ['postfix']="force" + ['sensors']="force" + ['squid']="force" + ['tomcat']="force" + ) + all_enabled_charts() { - local charts= enabled= - - # find all enabled charts - - for chart in $( all_charts ) - do - eval "enabled=\$$chart" - if [ -z "${enabled}" ] - then - enabled="${enable_all_charts}" - fi - - if [ ! "${enabled}" = "yes" ] - then - echo >&2 "$PROGRAM_NAME: '$chart' is NOT enabled. Add a line with $chart=yes in $myconfig to enable it (or remove the line that disables it)." - else - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: '$chart' is enabled." - local charts="$charts $chart" - fi - done - - local charts2= - for chart in $charts - do - # check the enabled charts - local check="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_check()" )" - if [ -z "$check" ] - then - echo >&2 "$PROGRAM_NAME: chart '$chart' does not seem to have a $chart$charts_check() function. Disabling it." - continue - fi - - local create="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_create()" )" - if [ -z "$create" ] - then - echo >&2 "$PROGRAM_NAME: chart '$chart' does not seem to have a $chart$charts_create() function. Disabling it." - continue - fi - - local update="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_update()" )" - if [ -z "$update" ] - then - echo >&2 "$PROGRAM_NAME: chart '$chart' does not seem to have a $chart$charts_update() function. Disabling it." - continue - fi - - # check its config - #if [ -f "$confd/$chart.conf" ] - #then - # if [ ! -z "$( cat "$confd/$chart.conf" | sed "s/^ \+//g" | grep -v "^$" | grep -v "^#" | grep -v "^$chart$charts_undescore" )" ] - # then - # echo >&2 "$PROGRAM_NAME: chart's $chart config $confd/$chart.conf should only have lines starting with $chart$charts_undescore . Disabling it." - # continue - # fi - #fi - - #if [ $dryrunner -eq 1 ] - # then - # "$pluginsd/charts.d.dryrun-helper.sh" "$chart" "$chartsd/$chart.chart.sh" "$confd/$chart.conf" >/dev/null - # if [ $? -ne 0 ] - # then - # echo >&2 "$PROGRAM_NAME: chart's $chart did not pass the dry run check. This means it uses global variables not starting with $chart. Disabling it." - # continue - # fi - #fi - - local charts2="$charts2 $chart" - done - - echo $charts2 - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: enabled charts: $charts2" + local charts= enabled= required= + + # find all enabled charts + + for chart in $( all_charts ) + do + eval "enabled=\$$chart" + if [ -z "${enabled}" ] + then + enabled="${enable_all_charts}" + fi + + required="${charts_enable_keyword[${chart}]}" + [ -z "${required}" ] && required="yes" + + if [ ! "${enabled}" = "${required}" ] + then + echo >&2 "$PROGRAM_NAME: '$chart' is NOT enabled. Add a line with $chart=$required in $myconfig to enable it (or remove the line that disables it)." + else + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: '$chart' is enabled." + local charts="$charts $chart" + fi + done + + local charts2= + for chart in $charts + do + # check the enabled charts + local check="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_check()" )" + if [ -z "$check" ] + then + echo >&2 "$PROGRAM_NAME: chart '$chart' does not seem to have a $chart$charts_check() function. Disabling it." + continue + fi + + local create="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_create()" )" + if [ -z "$create" ] + then + echo >&2 "$PROGRAM_NAME: chart '$chart' does not seem to have a $chart$charts_create() function. Disabling it." + continue + fi + + local update="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_update()" )" + if [ -z "$update" ] + then + echo >&2 "$PROGRAM_NAME: chart '$chart' does not seem to have a $chart$charts_update() function. Disabling it." + continue + fi + + # check its config + #if [ -f "$confd/$chart.conf" ] + #then + # if [ ! -z "$( cat "$confd/$chart.conf" | sed "s/^ \+//g" | grep -v "^$" | grep -v "^#" | grep -v "^$chart$charts_undescore" )" ] + # then + # echo >&2 "$PROGRAM_NAME: chart's $chart config $confd/$chart.conf should only have lines starting with $chart$charts_undescore . Disabling it." + # continue + # fi + #fi + + #if [ $dryrunner -eq 1 ] + # then + # "$pluginsd/charts.d.dryrun-helper.sh" "$chart" "$chartsd/$chart.chart.sh" "$confd/$chart.conf" >/dev/null + # if [ $? -ne 0 ] + # then + # echo >&2 "$PROGRAM_NAME: chart's $chart did not pass the dry run check. This means it uses global variables not starting with $chart. Disabling it." + # continue + # fi + #fi + + local charts2="$charts2 $chart" + done + + echo $charts2 + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: enabled charts: $charts2" } @@ -387,32 +408,36 @@ suffix_update_every="_update_every" active_charts= for chart in $( all_enabled_charts ) do - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: loading chart: '$chartsd/$chart.chart.sh'" - . "$chartsd/$chart.chart.sh" - - if [ -f "$confd/$chart.conf" ] - then - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: loading chart options: '$confd/$chart.conf'" - . "$confd/$chart.conf" - else - echo >&2 "$PROGRAM_NAME: $chart: configuration file '$confd/$chart.conf' not found. Using defaults." - fi - - eval "dt=\$$chart$suffix_update_every" - dt=$(( dt + 1 - 1 )) # make sure it is a number - if [ $dt -lt $update_every ] - then - eval "$chart$suffix_update_every=$update_every" - fi - - $chart$charts_check - if [ $? -eq 0 ] - then - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: '$chart' activated" - active_charts="$active_charts $chart" - else - echo >&2 "$PROGRAM_NAME: chart '$chart' check() function reports failure." - fi + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: loading chart: '$chartsd/$chart.chart.sh'" + . "$chartsd/$chart.chart.sh" + + if [ -f "$confd/charts.d/$chart.conf" ] + then + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: loading chart options: '$confd/charts.d/$chart.conf'" + . "$confd/charts.d/$chart.conf" + elif [ -f "$confd/$chart.conf" ] + then + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: loading chart options: '$confd/$chart.conf'" + . "$confd/$chart.conf" + else + echo >&2 "$PROGRAM_NAME: $chart: configuration file '$confd/charts.d/$chart.conf' not found. Using defaults." + fi + + eval "dt=\$$chart$suffix_update_every" + dt=$(( dt + 1 - 1 )) # make sure it is a number + if [ $dt -lt $update_every ] + then + eval "$chart$suffix_update_every=$update_every" + fi + + $chart$charts_check + if [ $? -eq 0 ] + then + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: '$chart' activated" + active_charts="$active_charts $chart" + else + echo >&2 "$PROGRAM_NAME: chart '$chart' check() function reports failure." + fi done [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: activated charts: $active_charts" @@ -427,26 +452,26 @@ test $debug -eq 1 && debug_time=tellwork # if we only need a specific chart, remove all the others if [ ! -z "${chart_only}" ] then - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: requested to run only for: '${chart_only}'" - check_charts= - for chart in $active_charts - do - if [ "$chart" = "$chart_only" ] - then - check_charts="$chart" - break - fi - done - active_charts="$check_charts" + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: requested to run only for: '${chart_only}'" + check_charts= + for chart in $active_charts + do + if [ "$chart" = "$chart_only" ] + then + check_charts="$chart" + break + fi + done + active_charts="$check_charts" fi [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: activated charts: $active_charts" # stop if we just need a pre-check if [ $check -eq 1 ] then - echo >&2 "CHECK RESULT" - echo >&2 "Will run the charts: $active_charts" - exit 0 + echo >&2 "CHECK RESULT" + echo >&2 "Will run the charts: $active_charts" + exit 0 fi # ----------------------------------------------------------------------------- @@ -454,13 +479,13 @@ fi TMP_DIR= chartsd_cleanup() { - cd /tmp - if [ ! -z "$TMP_DIR" -a -d "$TMP_DIR" ] - then - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: cleaning up temporary directory $TMP_DIR ..." - rm -rf "$TMP_DIR" - fi - exit 0 + cd /tmp + if [ ! -z "$TMP_DIR" -a -d "$TMP_DIR" ] + then + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: cleaning up temporary directory $TMP_DIR ..." + rm -rf "$TMP_DIR" + fi + exit 0 } trap chartsd_cleanup EXIT trap chartsd_cleanup SIGHUP @@ -468,9 +493,9 @@ trap chartsd_cleanup INT if [ $UID = "0" ] then - TMP_DIR="$( mktemp -d /var/run/netdata-${PROGRAM_NAME}-XXXXXXXXXX )" + TMP_DIR="$( mktemp -d /var/run/netdata-${PROGRAM_NAME}-XXXXXXXXXX )" else - TMP_DIR="$( mktemp -d /tmp/.netdata-${PROGRAM_NAME}-XXXXXXXXXX )" + TMP_DIR="$( mktemp -d /tmp/.netdata-${PROGRAM_NAME}-XXXXXXXXXX )" fi cd "$TMP_DIR" || exit 1 @@ -481,15 +506,15 @@ cd "$TMP_DIR" || exit 1 run_charts= for chart in $active_charts do - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: Calling '$chart$charts_create()'..." - $chart$charts_create - if [ $? -eq 0 ] - then - run_charts="$run_charts $chart" - [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: '$chart' has initialized." - else - echo >&2 "$PROGRAM_NAME: chart '$chart' function '$chart$charts_create()' reports failure." - fi + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: Calling '$chart$charts_create()'..." + $chart$charts_create + if [ $? -eq 0 ] + then + run_charts="$run_charts $chart" + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: '$chart' has initialized." + else + echo >&2 "$PROGRAM_NAME: chart '$chart' function '$chart$charts_create()' reports failure." + fi done [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: run_charts='$run_charts'" @@ -498,109 +523,131 @@ done # update dimensions if [ -z "$run_charts" ] - then - echo >&2 "$PROGRAM_NAME: No charts to collect data from." - echo "DISABLE" - exit 1 + then + echo >&2 "$PROGRAM_NAME: No charts to collect data from." + echo "DISABLE" + exit 1 fi -declare -A charts_last_update=() charts_update_every=() charts_next_update=() charts_run_counter=() +declare -A charts_last_update=() charts_update_every=() charts_next_update=() charts_run_counter=() charts_serial_failures=() global_update() { - local exit_at \ - c=0 dt ret last_ms exec_start_ms exec_end_ms \ - chart now_charts=() next_charts=($run_charts) - - # return the current time in ms in $now_ms - current_time_ms - - exit_at=$(( now_ms + (restart_timeout * 1000) )) - - for chart in $run_charts - do - eval "charts_update_every[$chart]=\$$chart$suffix_update_every" - test -z "${charts_update_every[$chart]}" && charts_update_every[$charts]=$update_every - charts_last_update[$chart]=$((now_ms - (now_ms % (charts_update_every[$chart] * 1000) ) )) - charts_next_update[$chart]=$(( charts_last_update[$chart] + (charts_update_every[$chart] * 1000) )) - charts_run_counter[$chart]=0 - - echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}" - echo "DIMENSION run_time 'run time' absolute 1 1" - done - - # the main loop - while [ 1 ] - do - c=$((c + 1)) - now_charts=("${next_charts[@]}") - next_charts=() - - # return the current time in ms in $now_ms - current_time_ms - - for chart in "${now_charts[@]}" - do - # echo >&2 "DEBUG: chart: $chart last: ${charts_last_update[$chart]}, next: ${charts_next_update[$chart]}, now: ${now_ms}" - if [ ${now_ms} -ge ${charts_next_update[$chart]} ] - then - last_ms=${charts_last_update[$chart]} - dt=$(( (now_ms - last_ms) )) - # echo >&2 "DEBUG: chart: $chart last: ${charts_last_update[$chart]}, next: ${charts_next_update[$chart]}, now: ${now_ms}, dt: ${dt}" - - charts_last_update[$chart]=${now_ms} - - while [ ${charts_next_update[$chart]} -lt ${now_ms} ] - do - charts_next_update[$chart]=$(( charts_next_update[$chart] + (charts_update_every[$chart] * 1000) )) - done - - # the first call should not give a duration - # so that netdata calibrates to current time - dt=$(( dt * 1000 )) - charts_run_counter[$chart]=$(( charts_run_counter[$chart] + 1 )) - if [ ${charts_run_counter[$chart]} -eq 1 ] - then - dt= - fi - - exec_start_ms=$now_ms - $chart$charts_update $dt - ret=$? - - # return the current time in ms in $now_ms - current_time_ms; exec_end_ms=$now_ms - - echo "BEGIN netdata.plugin_chartsd_$chart $dt" - if [ $ret -eq 0 ] - then - echo "SET run_time = $(( exec_end_ms - exec_start_ms ))" - next_charts+=($chart) - else - echo "SET run_time = $(( (exec_end_ms - exec_start_ms) * -1 ))" - echo >&2 "$PROGRAM_NAME: chart '$chart' update() function reports failure. Disabling it." - fi - echo "END" - else - next_charts+=($chart) - fi - done - - if [ "$pause_method" = "suspend" ] - then - echo "STOPPING_WAKE_ME_UP_PLEASE" - suspend || ( echo >&2 "$PROGRAM_NAME: suspend returned error $?, falling back to sleep."; loopsleepms $debug_time $update_every $time_divisor) - else - # wait the time you are required to - #loopsleepms $debug_time $update_every $time_divisor - if [ ${LOOPSLEEPMS_HIGHRES} -eq 1 ] - then - sleep 0.2 - else - sleep 1 - fi - fi - - test ${now_ms} -ge ${exit_at} && exit 0 - done + local exit_at \ + c=0 dt ret last_ms exec_start_ms exec_end_ms \ + chart now_charts=() next_charts=($run_charts) \ + next_ms x seconds millis + + # return the current time in ms in $now_ms + current_time_ms + + exit_at=$(( now_ms + (restart_timeout * 1000) )) + + for chart in $run_charts + do + eval "charts_update_every[$chart]=\$$chart$suffix_update_every" + test -z "${charts_update_every[$chart]}" && charts_update_every[$charts]=$update_every + charts_last_update[$chart]=$((now_ms - (now_ms % (charts_update_every[$chart] * 1000) ) )) + charts_next_update[$chart]=$(( charts_last_update[$chart] + (charts_update_every[$chart] * 1000) )) + charts_run_counter[$chart]=0 + charts_serial_failures[$chart]=0 + + echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}" + echo "DIMENSION run_time 'run time' absolute 1 1" + done + + # the main loop + while [ "${#next_charts[@]}" -gt 0 ] + do + c=$((c + 1)) + now_charts=("${next_charts[@]}") + next_charts=() + + # return the current time in ms in $now_ms + current_time_ms + + for chart in "${now_charts[@]}" + do + # echo >&2 "DEBUG: chart: $chart last: ${charts_last_update[$chart]}, next: ${charts_next_update[$chart]}, now: ${now_ms}" + if [ ${now_ms} -ge ${charts_next_update[$chart]} ] + then + last_ms=${charts_last_update[$chart]} + dt=$(( (now_ms - last_ms) )) + # echo >&2 "DEBUG: chart: $chart last: ${charts_last_update[$chart]}, next: ${charts_next_update[$chart]}, now: ${now_ms}, dt: ${dt}" + + charts_last_update[$chart]=${now_ms} + + while [ ${charts_next_update[$chart]} -lt ${now_ms} ] + do + charts_next_update[$chart]=$(( charts_next_update[$chart] + (charts_update_every[$chart] * 1000) )) + done + + # the first call should not give a duration + # so that netdata calibrates to current time + dt=$(( dt * 1000 )) + charts_run_counter[$chart]=$(( charts_run_counter[$chart] + 1 )) + if [ ${charts_run_counter[$chart]} -eq 1 ] + then + dt= + fi + + exec_start_ms=$now_ms + $chart$charts_update $dt + ret=$? + + # return the current time in ms in $now_ms + current_time_ms; exec_end_ms=$now_ms + + echo "BEGIN netdata.plugin_chartsd_$chart $dt" + echo "SET run_time = $(( exec_end_ms - exec_start_ms ))" + echo "END" + + if [ $ret -eq 0 ] + then + charts_serial_failures[$chart]=0 + next_charts+=($chart) + else + charts_serial_failures[$chart]=$(( charts_serial_failures[$chart] + 1 )) + + if [ ${charts_serial_failures[$chart]} -gt 10 ] + then + echo >&2 "$PROGRAM_NAME: chart '$chart' update() function reported failure ${charts_serial_failures[$chart]} times. Disabling it." + else + echo >&2 "$PROGRAM_NAME: chart '$chart' update() function reports failure. Will keep trying for a while." + next_charts+=($chart) + fi + fi + else + next_charts+=($chart) + fi + done + + if [ "$pause_method" = "suspend" ] + then + echo "STOPPING_WAKE_ME_UP_PLEASE" + suspend || ( echo >&2 "$PROGRAM_NAME: suspend returned error $?, falling back to sleep."; loopsleepms $debug_time $update_every $time_divisor) + else + # wait the time you are required to + next_ms=$((now_ms + (update_every * 1000 * 100) )) + for x in "${charts_next_update[@]}"; do [ ${x} -lt ${next_ms} ] && next_ms=${x}; done + next_ms=$((next_ms - now_ms)) + + if [ ${LOOPSLEEPMS_HIGHRES} -eq 1 -a ${next_ms} -gt 0 ] + then + seconds=$(( next_ms / 1000 )) + millis=$(( next_ms % 1000 )) + [ ${millis} -lt 10 ] && millis="0${millis}" + [ ${millis} -lt 100 ] && millis="0${millis}" + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: sleeping for ${seconds}.${millis} seconds." + sleep ${seconds}.${millis} + else + sleep $update_every + fi + fi + + test ${now_ms} -ge ${exit_at} && exit 0 + done + + echo >&2 "$PROGRAM_NAME: Nothing left to do. Disabling charts.d.plugin." + echo "DISABLE" } global_update -- cgit v1.2.3