# Monitor Unbound DNS servers with Netdata [Unbound](https://nlnetlabs.nl/projects/unbound/about/) is a "validating, recursive, caching DNS resolver" from NLNet Labs. In v1.19 of Netdata, we release a completely refactored collector for collecting real-time metrics from Unbound servers and displaying them in Netdata dashboards. Unbound runs on FreeBSD, OpenBSD, NetBSD, macOS, Linux, and Windows, and supports DNS-over-TLS, which ensures that DNS queries and answers are all encrypted with TLS. In theory, that should reduce the risk of eavesdropping or man-in-the-middle attacks when communicating to DNS servers. This guide will show you how to collect dozens of essential metrics from your Unbound servers with minimal configuration. ## Set up your Unbound installation As with all data sources, Netdata can auto-detect Unbound servers if you installed them using the standard installation procedure. Regardless of whether you're connecting to a local or remote Unbound server, you need to be able to access the server's `remote-control` interface via an IP address, FQDN, or Unix socket. To set up the `remote-control` interface, you can use `unbound-control`. First, run `unbound-control-setup` to generate the TLS key files that will encrypt connections to the remote interface. Then add the following to the end of your `unbound.conf` configuration file. See the [Unbound documentation](https://nlnetlabs.nl/documentation/unbound/howto-setup/#setup-remote-control) for more details on using `unbound-control`, such as how to handle situations when Unbound is run under a unique user. ```conf # enable remote-control remote-control: control-enable: yes ``` Next, make your `unbound.conf`, `unbound_control.key`, and `unbound_control.pem` files readable by Netdata using [access control lists](https://wiki.archlinux.org/index.php/Access_Control_Lists) (ACL). ```bash sudo setfacl -m user:netdata:r unbound.conf sudo setfacl -m user:netdata:r unbound_control.key sudo setfacl -m user:netdata:r unbound_control.pem ``` Finally, take note whether you're using Unbound in _cumulative_ or _non-cumulative_ mode. This will become relevant when configuring the collector. ## Configure the Unbound collector You may not need to do any more configuration to have Netdata collect your Unbound metrics. If you followed the steps above to enable `remote-control` and make your Unbound files readable by Netdata, that should be enough. Restart Netdata with `service netdata restart`, or the appropriate method for your system. You should see Unbound metrics in your Netdata dashboard! ![Some charts showing Unbound metrics in real-time](https://user-images.githubusercontent.com/1153921/69659974-93160f00-103c-11ea-88e6-27e9efcf8c0d.png) If that failed, you will need to manually configure `unbound.conf`. See the next section for details. ### Manual setup for a local Unbound server To configure Netdata's Unbound collector module, navigate to your Netdata configuration directory (typically at `/etc/netdata/`) and use `edit-config` to initialize and edit your Unbound configuration file. ```bash cd /etc/netdata/ # Replace with your Netdata configuration directory, if not /etc/netdata/ sudo ./edit-config go.d/unbound.conf ``` The file contains all the global and job-related parameters. The `name` setting is required, and two Unbound servers can't have the same name. > It is important you know whether your Unbound server is running in cumulative or non-cumulative mode, as a conflict > between modes will create incorrect charts. Here are two examples for local Unbound servers, which may work based on your unique setup: ```yaml jobs: - name: local address: 127.0.0.1:8953 cumulative: no use_tls: yes tls_skip_verify: yes tls_cert: /path/to/unbound_control.pem tls_key: /path/to/unbound_control.key - name: local address: 127.0.0.1:8953 cumulative: yes use_tls: no ``` Netdata will attempt to read `unbound.conf` to get the appropriate `address`, `cumulative`, `use_tls`, `tls_cert`, and `tls_key` parameters. Restart Netdata with `service netdata restart`, or the appropriate method for your system. ### Manual setup for a remote Unbound server Collecting metrics from remote Unbound servers requires manual configuration. There are too many possibilities to cover all remote connections here, but the [default `unbound.conf` file](https://github.com/netdata/go.d.plugin/blob/master/config/go.d/unbound.conf) contains a few useful examples: ```yaml jobs: - name: remote address: 203.0.113.10:8953 use_tls: no - name: remote_cumulative address: 203.0.113.11:8953 use_tls: no cumulative: yes - name: remote address: 203.0.113.10:8953 cumulative: yes use_tls: yes tls_cert: /etc/unbound/unbound_control.pem tls_key: /etc/unbound/unbound_control.key ``` To see all the available options, see the default [unbound.conf file](https://github.com/netdata/go.d.plugin/blob/master/config/go.d/unbound.conf). ## What's next? Now that you're collecting metrics from your Unbound servers, let us know how it's working for you! There's always room for improvement or refinement based on real-world use cases. Feel free to [file an issue](https://github.com/netdata/netdata/issues/new?labels=bug%2C+needs+triage&template=bug_report.md) with your thoughts. [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdocs%2Fguides%2Funbound-metrics&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)