blob: a31ad0c7ac926fc701722a68dbf4cf781333c485 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
# smartd_log
Module monitor `smartd` log files to collect HDD/SSD S.M.A.R.T attributes.
**Requirements:**
* `smartmontools`
It produces following charts for SCSI devices:
1. **Read Error Corrected**
2. **Read Error Uncorrected**
3. **Write Error Corrected**
4. **Write Error Uncorrected**
5. **Verify Error Corrected**
6. **Verify Error Uncorrected**
7. **Temperature**
For ATA devices:
1. **Read Error Rate**
2. **Seek Error Rate**
3. **Soft Read Error Rate**
4. **Write Error Rate**
5. **SATA Interface Downshift**
6. **UDMA CRC Error Count**
7. **Throughput Performance**
8. **Seek Time Performance**
9. **Start/Stop Count**
10. **Power-On Hours Count**
11. **Power Cycle Count**
12. **Unexpected Power Loss**
13. **Spin-Up Time**
14. **Spin-up Retries**
15. **Calibration Retries**
16. **Temperature**
17. **Reallocated Sectors Count**
18. **Reserved Block Count**
19. **Program Fail Count**
20. **Erase Fail Count**
21. **Wear Leveller Worst Case Erase Count**
22. **Unused Reserved NAND Blocks**
23. **Reallocation Event Count**
24. **Current Pending Sector Count**
25. **Offline Uncorrectable Sector Count**
26. **Percent Lifetime Used**
### prerequisite
`smartd` must be running with `-A` option to write smartd attribute information to files.
For this you need to set `smartd_opts` (or `SMARTD_ARGS`, check _smartd.service_ content) in `/etc/default/smartmontools`:
```
# dump smartd attrs info every 600 seconds
smartd_opts="-A /var/log/smartd/ -i 600"
```
`smartd` appends logs at every run. It's strongly recommended to use `logrotate` for smartd files.
### configuration
```yaml
local:
log_path : '/var/log/smartd/'
```
If no configuration is given, module will attempt to read log files in `/var/log/smartd/` directory.
---
|
