From dc597ce8df5ae6efd2728a2d7ba7d92486028f79 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 2 Jul 2021 22:40:30 +0200 Subject: Adding upstream version 1.12. Signed-off-by: Daniel Baumann --- Documentation/nvme-discover.txt | 208 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 Documentation/nvme-discover.txt (limited to 'Documentation/nvme-discover.txt') diff --git a/Documentation/nvme-discover.txt b/Documentation/nvme-discover.txt new file mode 100644 index 0000000..f006639 --- /dev/null +++ b/Documentation/nvme-discover.txt @@ -0,0 +1,208 @@ +nvme-discover(1) +================ + +NAME +---- +nvme-discover - Send Get Log Page request to Discovery Controller. + +SYNOPSIS +-------- +[verse] +'nvme discover' + [--transport= | -t ] + [--traddr= | -a ] + [--trsvcid= | -s ] + [--host-traddr= | -w ] + [--hostnqn= | -q ] + [--hostid= | -I ] + [--raw= | -r ] + [--keep-alive-tmo= | -k ] + [--reconnect-delay=<#> | -c <#>] + [--ctrl-loss-tmo=<#> | -l <#>] + [--hdr_digest | -g] + [--data_digest | -G] + [--nr-io-queues=<#> | -i <#>] + [--nr-write-queues=<#> | -W <#>] + [--nr-poll-queues=<#> | -P <#>] + [--queue-size=<#> | -Q <#>] + [--persistent | -p] + [--quiet | -S] + +DESCRIPTION +----------- +Send one or more Get Log Page requests to a NVMe-over-Fabrics Discovery +Controller. + +If no parameters are given, then 'nvme discover' will attempt to +find a /etc/nvme/discovery.conf file to use to supply a list of +Discovery commands to run. If no /etc/nvme/discovery.conf file +exists, the command will quit with an error. + +Otherwise, a specific Discovery Controller should be specified using the +--transport, --traddr, and if necessary the --trsvcid flags. A Diѕcovery +request will then be sent to the specified Discovery Controller. + +BACKGROUND +---------- +The NVMe-over-Fabrics specification defines the concept of a +Discovery Controller that an NVMe Host can query on a fabric +network to discover NVMe subsystems contained in NVMe Targets +which it can connect to on the network. The Discovery Controller +will return Discovery Log Pages that provide the NVMe Host +with specific information (such as network address and unique +subsystem NQN) the NVMe Host can use to issue an +NVMe connect command to connect itself to a storage resource +contained in that NVMe subsystem on the NVMe Target. + +Note that the base NVMe specification defines the NQN (NVMe Qualified +Name) format which an NVMe endpoint (device, subsystem, etc) must +follow to guarantee a unique name under the NVMe standard. +In particular, the Host NQN uniquely identifies the NVMe Host, and +may be used by the the Discovery Controller to control what NVMe Target +resources are allocated to the NVMe Host for a connection. + +A Discovery Controller has it's own NQN defined in the NVMe-over-Fabrics +specification, *nqn.2014-08.org.nvmexpress.discovery*. All Discovery +Controllers must use this NQN name. This NQN is used by default by +nvme-cli for the 'discover' command. + +OPTIONS +------- +-t :: +--transport=:: + This field specifies the network fabric being used for + a NVMe-over-Fabrics network. Current string values include: ++ +[] +|================= +|Value|Definition +|rdma|The network fabric is an rdma network (RoCE, iWARP, Infiniband, basic rdma, etc) +|fc |*WIP* The network fabric is a Fibre Channel network. +|loop|Connect to a NVMe over Fabrics target on the local host +|================= + +-a :: +--traddr=:: + This field specifies the network address of the Discovery Controller. + For transports using IP addressing (e.g. rdma) this should be an + IP-based (ex. IPv4) address. + +-s :: +--trsvcid=:: + This field specifies the transport service id. For transports using IP + addressing (e.g. rdma) this field is the port number. By default, the IP + port number for the RDMA transport is 4420. + +-w :: +--host-traddr=:: + This field specifies the network address used on the host to connect + to the Discovery Controller. + +-q :: +--hostnqn=:: + Overrides the default host NQN that identifies the NVMe Host. + If this option is not specified, the default is read from + /etc/nvme/hostnqn first. If that does not exist, the autogenerated + NQN value from the NVMe Host kernel module is used next. + +-I :: +--hostid=:: + UUID(Universally Unique Identifier) to be discovered which should be + formatted. + +-r :: +--raw=:: + This field will take the output of the 'nvme discover' command + and dump it to a raw binary file. By default 'nvme discover' will + dump the output to stdout. + +-k <#>:: +--keep-alive-tmo=<#>:: + Overrides the default dealy (in seconds) for keep alive. + This option will be ignored for the discovery, and it is only + implemented for completeness. + +-c <#>:: +--reconnect-delay=<#>:: + Overrides the default delay (in seconds) before reconnect is attempted + after a connect loss. + +-l <#>:: +--ctrl-loss-tmo=<#>:: + Overrides the default controller loss timeout period (in seconds). + +-g:: +--hdr_digest:: + Generates/verifies header digest (TCP). + +-G:: +--data_digest:: + Generates/verifies data digest (TCP). + +-i <#>:: +--nr-io-queues=<#>:: + Overrides the default number of I/O queues create by the driver. + This option will be ignored for the discovery, and it is only + implemented for completeness. + +-W <#>:: +--nr-write-queues=<#>:: + Adds additional queues that will be used for write I/O. + +-P <#>:: +--nr-poll-queues=<#>:: + Adds additional queues that will be used for polling latency sensitive I/O. + +-Q <#>:: +--queue-size=<#>:: + Overrides the default number of elements in the I/O queues created + by the driver which can be found at drivers/nvme/host/fabrics.h. + This option will be ignored for the discovery, and it is only + implemented for completeness. + +-p:: +--persistent:: + Persistent discovery connection. + +-S:: +--quiet:: + Suppress already connected errors. + +EXAMPLES +-------- +* Query the Discover Controller with IP4 address 192.168.1.3 for all +resources allocated for NVMe Host name host1-rogue-nqn on the RDMA network. +Port 4420 is used by default: ++ +------------ +# nvme discover --transport=rdma --traddr=192.168.1.3 \ +--hostnqn=host1-rogue-nqn +------------ ++ +* Issue a 'nvme discover' command using a /etc/nvme/discovery.conf file: ++ +----------- +# Machine default 'nvme discover' commands. Query the +# Discovery Controller's two ports (some resources may only +# be accessible on a single port). Note an official +# nqn (Host) name defined in the NVMe specification is being used +# in this example. +-t rdma -a 192.168.69.33 -s 4420 -q nqn.2014-08.com.example:nvme:nvm-subsystem-sn-d78432 +-t rdma -a 192.168.1.4 -s 4420 -q nqn.2014-08.com.example:nvme:nvm-subsystem-sn-d78432 + +At the prompt type "nvme discover". + +------------ + +SEE ALSO +-------- +nvme-connect(1) +nvme-connect-all(1) + +AUTHORS +------- +This was written by mailto:james.p.freyensee@intel.com[Jay Freyensee] + +NVME +---- +Part of the nvme-user suite -- cgit v1.2.3