nvme-connect-all(1) =================== NAME ---- nvme-connect-all - Discover and Connect to Fabrics controllers. SYNOPSIS -------- [verse] 'nvme connect-all' [--transport= | -t ] [--nqn= | -n ] [--traddr= | -a ] [--trsvcid= | -s ] [--host-traddr= | -w ] [--host-iface= | -f ] [--hostnqn= | -q ] [--hostid= | -I ] [--raw= | -r ] [--device= | -d ] [--config= | -J ] [--keep-alive-tmo= | -k ] [--reconnect-delay=<#> | -c <#>] [--ctrl-loss-tmo=<#> | -l <#>] [--nr-io-queues=<#> | -i <#>] [--nr-write-queues=<#> | -W <#>] [--nr-poll-queues=<#> | -P <#>] [--queue-size=<#> | -Q <#>] [--keyring=<#>] [--tls_key=<#>] [--hdr-digest | -g] [--data-digest | -G] [--persistent | -p] [--tls] [--concat] [--quiet | -S] [--dump-config | -O] [--nbft] [--no-nbft] [--nbft-path=] [--context=] [--output-format= | -o ] [--verbose | -v] DESCRIPTION ----------- Send one or more Discovery requests to a NVMe over Fabrics Discovery Controller, and create controllers for the returned discovery records. If no parameters are given, then 'nvme connect-all' will attempt to find a @SYSCONFDIR@/nvme/discovery.conf file to use to supply a list of connect-all commands to run. If no @SYSCONFDIR@/nvme/discovery.conf file exists, the command will quit with an error. Otherwise a specific Discovery Controller should be specified using the --transport, --traddr and if necessary the --trsvcid and a Discovery request will be sent to the specified Discovery Controller. See the documentation for the nvme-discover(1) command for further background. OPTIONS ------- -t :: --transport=:: This field specifies the network fabric being used for a NVMe-over-Fabrics network. Current string values include: + [] |================= |Value|Definition |rdma|The network fabric is an rdma network (RoCE, iWARP, Infiniband, basic rdma, etc) |fc |*WIP* The network fabric is a Fibre Channel network. |tcp |The network fabric is a TCP/IP network. |loop|Connect to a NVMe over Fabrics target on the local host |================= -n :: --nqn :: This field specifies the name for the NVMe subsystem to connect to. -a :: --traddr=:: This field specifies the network address of the Discovery Controller. For transports using IP addressing (e.g. rdma) this should be an IP-based address (ex. IPv4). -s :: --trsvcid=:: This field specifies the transport service id. For transports using IP addressing (e.g. rdma) this field is the port number. By default, the IP port number for the RDMA transport is 4420. -w :: --host-traddr=:: This field specifies the network address used on the host to connect to the Controller. For TCP, this sets the source address on the socket. -f :: --host-iface=:: This field specifies the network interface used on the host to connect to the Controller (e.g. IP eth1, enp2s0, enx78e7d1ea46da). This forces the connection to be made on a specific interface instead of letting the system decide. -q :: --hostnqn=:: Overrides the default Host NQN that identifies the NVMe Host. If this option is not specified, the default is read from @SYSCONFDIR@/nvme/hostnqn first. If that does not exist, the autogenerated NQN value from the NVMe Host kernel module is used next. The Host NQN uniquely identifies the NVMe Host, and may be used by the the Discovery Controller to control what NVMe Target resources are allocated to the NVMe Host for a connection. -I :: --hostid=:: UUID(Universally Unique Identifier) to be discovered which should be formatted. -r :: --raw=:: This field will take the output of the 'nvme connect-all' command and dump it to a raw binary file. By default 'nvme connect-all' will dump the output to stdout. -d :: --device=:: This field takes a device as input. It must be a persistent device associated with a Discovery Controller previously created by the command "connect-all" or "discover". follows the format nvme*, eg. nvme0, nvme1. -J :: --config=:: Use the specified JSON configuration file instead of the default @SYSCONFDIR@/nvme/config.json file or 'none' to not read in an existing configuration file. The JSON configuration file format is documented in https://github.com/linux-nvme/libnvme/blob/master/doc/config-schema.json -k <#>:: --keep-alive-tmo=<#>:: Overrides the default keep alive timeout (in seconds). This option will be ignored for discovery, but will be passed on to the subsequent connect call. -c <#>:: --reconnect-delay=<#>:: Overrides the default delay (in seconds) before reconnect is attempted after a connect loss. -l <#>:: --ctrl-loss-tmo=<#>:: Overrides the default controller loss timeout period (in seconds). -i <#>:: --nr-io-queues=<#>:: Overrides the default number of I/O queues create by the driver. This option will be ignored for discovery, but will be passed on to the subsequent connect call. -W <#>:: --nr-write-queues=<#>:: Adds additional queues that will be used for write I/O. -P <#>:: --nr-poll-queues=<#>:: Adds additional queues that will be used for polling latency sensitive I/O. -Q <#>:: --queue-size=<#>:: Overrides the default number of elements in the I/O queues created by the driver. This option will be ignored for discovery, but will be passed on to the subsequent connect call. --keyring=<#>:: Keyring for TLS key lookup. --tls_key=<#>:: TLS key for the connection (TCP). -g:: --hdr-digest:: Generates/verifies header digest (TCP). -G:: --data-digest:: Generates/verifies data digest (TCP). -p:: --persistent:: Don't remove the discovery controller after retrieving the discovery log page. --tls:: Enable TLS encryption (TCP). --concat:: Enable secure concatenation (TCP). -S:: --quiet:: Suppress error messages. -O:: --dump-config:: Print out resulting JSON configuration file to stdout. --nbft:: Only look at NBFT tables --no-nbft:: Do not look at NBFT tables --nbft-path=:: Use a user-defined path to the NBFT tables --context :: Set the execution context to . This allows to coordinate the management of the global resources. -o :: --output-format=:: Set the reporting format to 'normal', 'json' or 'binary'. Only one output format can be used at a time. -v:: --verbose:: Increase the information detail in the output. EXAMPLES -------- * Connect to all records returned by the Discover Controller with IP4 address 192.168.1.3 for all resources allocated for NVMe Host name host1-rogue-nqn on the RDMA network. Port 4420 is used by default: + ------------ # nvme connect-all --transport=rdma --traddr=192.168.1.3 \ --hostnqn=host1-rogue-nqn ------------ + * Issue a 'nvme connect-all' command using the default system defined NBFT tables: + ----------- # nvme connect-all --nbft ------------ + * Issue a 'nvme connect-all' command with a user-defined path for the NBFT table: + ----------- # nvme connet-all --nbft-path=/sys/firmware/acpi/tables/NBFT1 ------------ + * Issue a 'nvme connect-all' command using a @SYSCONFDIR@/nvme/discovery.conf file: + ----------- # Machine default 'nvme discover' commands. Query the # Discovery Controller's two ports (some resources may only # be accessible on a single port). Note an official # nqn (Host) name defined in the NVMe specification is being used # in this example. -t rdma -a 192.168.69.33 -s 4420 -q nqn.2014-08.com.example:nvme:nvm-subsystem-sn-d78432 -t rdma -a 192.168.1.4 -s 4420 -q nqn.2014-08.com.example:nvme:nvm-subsystem-sn-d78432 At the prompt type "nvme connect-all". ------------ SEE ALSO -------- nvme-discover(1) nvme-connect(1) NVME ---- Part of the nvme-user suite