Adding upstream version 20161105.

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>

21 files changed, 862 insertions, 210 deletions

diff --git a/CHANGELOG.txt b/CHANGELOG.txt
index 3896c66..8f94beb 100644
--- a/CHANGELOG.txt
+++ b/CHANGELOG.txt
@@ -1,3 +1,25 @@
+2016-11-05	Daniel Baumann <daniel.baumann@open-infrastructure.net>
+
+	* Releasing version 20161105.
+	* Backward incompatible changes:
+	  - container use systemd-networkd instead of ifupdown.
+
+	[ Daniel Baumann ]
+	* Readding container rename command.
+	* Readding -f|--force option in container stop command.
+	* Readding container limit command.
+	* Readding container enter command.
+	* Removing empty line at the end of the changelog file.
+	* Replacing README.txt with a copy of container-tools.7 manpage.
+	* Installing README.txt into documentation directory.
+	* Installing all generic text files as documentation.
+	* Adding mandatory inclusion of /etc/network/interfaces.d files in host-setup documentation, thanks to Richard Nelson <unixabg@gmail.com>.
+	* Using systemd-networkd in container instead of ifupdown.
+	* Updating container list command to use systemd-networkd config instead of ifupdown.
+	* Excluding symlinks in container-shell command list.
+	* Adding container list to ls symlink.
+	* Adding container remove to rm symlink.
+
 2016-11-01	Daniel Baumann <daniel.baumann@open-infrastructure.net>
 
 	* Releasing version 20161101.
@@ -271,4 +293,3 @@
 2016-03-01	Daniel Baumann <daniel.baumann@open-infrastructure.net>
 
 	* Releasing version 20160301.
-
diff --git a/Makefile b/Makefile
index 94289f2..910e934 100644
--- a/Makefile
+++ b/Makefile
@@ -52,6 +52,8 @@ test:
 build: share/man/*.txt
 	$(MAKE) -C share/man
 
+	sed -n '/^NAME/,$$p' share/man/$(SOFTWARE).7.txt > README.txt
+
 install: build
 	mkdir -p $(DESTDIR)/etc/${SOFTWARE}/config
 	mkdir -p $(DESTDIR)/etc/${SOFTWARE}/debconf
@@ -73,8 +75,8 @@ install: build
 	cp -r share/sudo/* $(DESTDIR)/etc/sudoers.d
 	chmod 0440 $(DESTDIR)/etc/sudoers.d/*
 
-	mkdir -p $(DESTDIR)/usr/share/doc
-	cp -r share/doc $(DESTDIR)/usr/share/doc/$(SOFTWARE)
+	mkdir -p $(DESTDIR)/usr/share/doc/$(SOFTWARE)
+	cp -r CHANGELOG.txt LICENSE.txt README.txt share/doc/* $(DESTDIR)/usr/share/doc/$(SOFTWARE)
 
 	for SECTION in $$(seq 1 8); \
 	do \
@@ -98,6 +100,9 @@ install: build
 	ln -sf debconf.d ${DESTDIR}/usr/share/$(SOFTWARE)/scripts/progress-linux.d
 	ln -sf container-create-debconf.1 $(DESTDIR)/usr/share/man/man1/container-create-progress-linux.1
 
+	ln -sf list $(DESTDIR)/usr/lib/$(SOFTWARE)/container/ls
+	ln -sf remove $(DESTDIR)/usr/lib/$(SOFTWARE)/container/rm
+
 	mkdir -p $(DESTDIR)/lib/systemd/system
 	cp -r share/systemd/* $(DESTDIR)/lib/systemd/system
 
@@ -164,6 +169,8 @@ uninstall:
 clean:
 	$(MAKE) -C share/man clean
 
+	rm -f README.txt
+
 distclean:
 
 reinstall: uninstall install
diff --git a/README.txt b/README.txt
deleted file mode 100644
index 2b927f2..0000000
--- a/README.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-container-tools - Manage systemd-nspawn containers
-==================================================
-
-
-1. Description
---------------
-
-  "[A Linux container] is an operating-system-level virtualization environment
-  for running multiple isolated Linux systems (containers) on a single Linux
-  control host."
-
-    -- Wikipedia (https://en.wikipedia.org/wiki/LXC)
-
-container-tools provides the system integration for managing containers using
-systemd-nspawn.
-
-
-2. Download
------------
-
-  * Upstream Releases: https://files.open-infrastructure.net/software/container-tools/upstream
-  * Upstream Sources: https://sources.open-infrastructure.net/software/container-tools
-  * Debian Releases: https://files.open-infrastructure.net/software/container-tools/debian
-  * Debian Sources: https://sources.progress-linux.org/users/daniel/debian/packages/open-infrastructure-container-tools
-
-
-3. Installation
----------------
-
-3.1 Source
-----------
-
-  1. sudo apt install asciidoc git docbook-xml docbook-xsl libxml2-utils make xsltproc dbus systemd-container
-  2. git clone https://sources.open-infrastructure.net/software/container-tools
-  3. cd container-tools && sudo make install
-
-3.2 Debian 9 (stretch) and newer
---------------------------------
-
-  * sudo apt install container-tools
-
-
-4. Development
---------------
-
-Bug reports, feature requests, and patches are welcome via Debian Bug Tracking System:
-
-  * https://bugs.debian.org
-
-Please base them against the 'next' Git branch using common sense:
-
-  * https://www.kernel.org/doc/Documentation/SubmittingPatches
-
-
-5. Known Limitations
---------------------
-
-  * This version of container-tools currently do not work with systemd-networkd and depend on ifupdown.
-  * Using overlay, the upper directory can not be an NFS mount due to limitations in Linux' overlay filesystem,
-    see https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/filesystems/overlayfs.txt
-
-
-6. Usage
---------
-
-  * Create a new container:
-    sudo container create -n NAME
-
-  * Start a container:
-    sudo container start -n NAME
-
-  * Stop a container:
-    sudo container stop -n NAME
-
-  * Remove a container:
-    sudo container remove -n NAME
-
-  * List container on the system:
-    sudo container list
-
-  * Show container-tools version:
-    container version
-
-See container(1) for a list of all container commands.
-
-
-7. Links
---------
-
-  * 2016-02-24: Systemd vs. Docker
-    https://lwn.net/Articles/676831/
-
-  * 2015-06-10: Systemd and containers
-    https://lwn.net/Articles/647634/
-
-  * 2014-07-07: Control groups
-    https://lwn.net/Articles/604609/
-
-  * 2013-11-13: Systemd-Nspawn is Chroot on Steroids [LinuxCon Europe]
-    https://www.youtube.com/watch?v=s7LlUs5D9p4
-
-  * 2013-11-03: Creating containers with systemd-nspawn
-    https://lwn.net/Articles/572957/
-
-  * 2013-02-06: Systemd lightweight containers
-    https://lwn.net/Articles/536033/
-
-  * 2013-01-04: Namespaces in operation
-    https://lwn.net/Articles/531114/
-
-
-8. Authors
-----------
-
-  * Daniel Baumann <daniel.baumann@open-infrastructure.net>
diff --git a/VERSION.txt b/VERSION.txt
index c2ace56..72dace3 100644
--- a/VERSION.txt
+++ b/VERSION.txt
@@ -1 +1 @@
-20161101
+20161105
diff --git a/bin/container-nsenter b/bin/container-nsenter
new file mode 100755
index 0000000..7c83361
--- /dev/null
+++ b/bin/container-nsenter
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+# container-tools - Manage systemd-nspawn containers
+# Copyright (C) 2014-2016 Daniel Baumann <daniel.baumann@open-infrastructure.net>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+set -e
+
+# Run
+script -c "/bin/bash -l" -q /dev/null
diff --git a/bin/container-shell b/bin/container-shell
index da91c76..9b45f72 100755
--- a/bin/container-shell
+++ b/bin/container-shell
@@ -63,7 +63,7 @@ Shell ()
 					echo
 
 					cd "/usr/lib/${SOFTWARE}/${PROGRAM}"
-					echo "$(for COMMAND in about logout *; do echo ${COMMAND}; done | sort)"
+					find . -type f -printf "%f\n" | sort
 					cd "${OLDPWD}"
 
 					echo
diff --git a/lib/container/enter b/lib/container/enter
new file mode 100755
index 0000000..4eff504
--- /dev/null
+++ b/lib/container/enter
@@ -0,0 +1,102 @@
+#!/bin/sh
+
+# container-tools - Manage systemd-nspawn containers
+# Copyright (C) 2014-2016 Daniel Baumann <daniel.baumann@open-infrastructure.net>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+set -e
+
+COMMAND="$(basename ${0})"
+
+MACHINES="/var/lib/machines"
+
+Parameters ()
+{
+	LONG_OPTIONS="name:,"
+	OPTIONS="n:,"
+
+	PARAMETERS="$(getopt --longoptions ${LONG_OPTIONS} --name=${COMMAND} --options ${OPTIONS} --shell sh -- ${@})"
+
+	if [ "${?}" != "0" ]
+	then
+		echo "'${COMMAND}': getopt exit" >&2
+		exit 1
+	fi
+
+	eval set -- "${PARAMETERS}"
+
+	while true
+	do
+		case "${1}" in
+			-n|--name)
+				NAME="${2}"
+				shift 2
+				;;
+
+			--)
+				shift 1
+				break
+				;;
+
+			*)
+				echo "'${COMMAND}': getopt error" >&2
+				exit 1
+				;;
+		esac
+	done
+}
+
+Usage ()
+{
+	echo "Usage: container ${COMMAND} -n|--name NAME" >&2
+	exit 1
+}
+
+Parameters "${@}"
+
+if [ -z "${NAME}" ]
+then
+	Usage
+fi
+
+if [ ! -e "${MACHINES}/${NAME}" ]
+then
+	echo "'${NAME}': no such container" >&2
+	exit 1
+fi
+
+STATE="$(machinectl show ${NAME} 2>&1 | awk -F= '/^State=/ { print $2 }')"
+
+case "${STATE}" in
+	running)
+		;;
+
+	*)
+		echo "'${NAME}': container is not running" >&2
+		exit 1
+		;;
+esac
+
+LEADER="$(machinectl status ${NAME} | awk '/Leader: / { print $2 }')"
+
+# Run
+if [ -e "${MACHINES}/${NAME}/usr/bin/container-nsenter" ]
+then
+	OPTIONS="/usr/bin/container-nsenter"
+else
+	OPTIONS=""
+fi
+
+nsenter --target ${LEADER} --mount --uts --ipc --net --pid --root --wd=/root ${OPTIONS}
diff --git a/lib/container/limit b/lib/container/limit
new file mode 100755
index 0000000..8b5ffd5
--- /dev/null
+++ b/lib/container/limit
@@ -0,0 +1,186 @@
+#!/bin/sh
+
+# container-tools - Manage systemd-nspawn containers
+# Copyright (C) 2014-2016 Daniel Baumann <daniel.baumann@open-infrastructure.net>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+set -e
+
+COMMAND="$(basename ${0})"
+
+MACHINES="/var/lib/machines"
+
+Parameters ()
+{
+	LONG_OPTIONS="name:,blockio-device-weight:,blockio-read-bandwith:,blockio-weight:,blockio-write-bandwith:,cpu-quota:,cpu-shares:,memory-limit:,tasks-max:,"
+	OPTIONS="n:b:c:m:t:,"
+
+	PARAMETERS="$(getopt --longoptions ${LONG_OPTIONS} --name=${COMMAND} --options ${OPTIONS} --shell sh -- ${@})"
+
+	if [ "${?}" != "0" ]
+	then
+		echo "'${COMMAND}': getopt exit" >&2
+		exit 1
+	fi
+
+	eval set -- "${PARAMETERS}"
+
+	while true
+	do
+		case "${1}" in
+			-n|--name)
+				NAME="${2}"
+				shift 2
+				;;
+
+			-c|--cpu-quota)
+				CPU_QUOTA="${2}"
+				shift 2
+				;;
+
+			--cpu-shares)
+				CPU_SHARES="${2}"
+				shift 2
+				;;
+
+			-m|--memory-limit)
+				MEMORY_LIMIT="${2}"
+				shift 2
+				;;
+
+			-t|--tasks-max)
+				TASKS_MAX="${2}"
+				shift 2
+				;;
+
+			--blockio-device-weight)
+				BLOCK_IO_DEVICE_WEIGHT="${2}"
+				shift 2
+				;;
+
+			--blockio-read-bandwith)
+				BLOCK_IO_READ_BANDWITH="${2}"
+				shift 2
+				;;
+
+			-b|--blockio-weight)
+				BLOCK_IO_WEIGHT="${2}"
+				shift 2
+				;;
+
+			--blockio-write-bandwith)
+				BLOCK_IO_WRITE_BANDWITH="${2}"
+				shift 2
+				;;
+
+			--)
+				shift 1
+				break
+				;;
+
+			*)
+				echo "'${COMMAND}': getopt error" >&2
+				exit 1
+				;;
+		esac
+	done
+}
+
+Usage ()
+{
+	echo "Usage: container ${COMMAND} -n|--name NAME [--blockio-device-weight \"DEVICE WEIGHT\"] [--blockio-read-bandwith \"DEVICE BYTES\"] [-b|--blockio-weight WEIGHT] [--blockio-write-bandwith \"DEVICE BYTES\"] [-c|--cpu-quota QUOTA] [--cpu-shares SHARES] [-m|--memory-limit BYTES] [-t|--tasks-max NUMBER]" >&2
+	exit 1
+}
+
+Parameters "${@}"
+
+if [ -z "${NAME}" ]
+then
+	Usage
+fi
+
+if [ ! -e "${MACHINES}/${NAME}" ]
+then
+	echo "'${NAME}': no such container" >&2
+	exit 1
+fi
+
+STATE="$(machinectl show ${NAME} 2>&1 | awk -F= '/^State=/ { print $2 }')"
+
+case "${STATE}" in
+	running)
+		;;
+
+	*)
+		echo "'${NAME}': container is not running" >&2
+		exit 1
+		;;
+esac
+
+if [ -n "${BLOCK_IO_DEVICE_WEIGHT}" ]
+then
+	BLOCK_IO_DEVICE_WEIGHT="BlockIODeviceWeight=${BLOCK_IO_DEVICE_WEIGHT}"
+	SET_PROPERTY="true"
+fi
+
+if [ -n "${BLOCK_IO_READ_BANDWITH}" ]
+then
+	BLOCK_IO_READ_BANDWITH="BlockIOReadBandwidth=${BLOCK_IO_READ_BANDWITH}"
+	SET_PROPERTY="true"
+fi
+
+if [ -n "${BLOCK_IO_WEIGHT}" ]
+then
+	BLOCK_IO_WEIGHT="BlockIOWeight=${BLOCK_IO_WEIGHT}"
+	SET_PROPERTY="true"
+fi
+
+if [ -n "${BLOCK_IO_WRITE_BANDWITH}" ]
+then
+	BLOCK_IO_WRITE_BANDWITH="BlockIOReadBandwidth=${BLOCK_IO_WRITE_BANDWITH}"
+	SET_PROPERTY="true"
+fi
+
+if [ -n "${CPU_QUOTA}" ]
+then
+	CPU_QUOTA="CPUQuota=${CPU_QUOTA}"
+	SET_PROPERTY="true"
+fi
+
+if [ -n "${CPU_SHARES}" ]
+then
+	CPU_SHARES="CPUShares=${CPU_SHARES}"
+	SET_PROPERTY="true"
+fi
+
+if [ -n "${MEMORY_LIMIT}" ]
+then
+	MEMORY_LIMIT="MemoryLimit=${MEMORY_LIMIT}"
+	SET_PROPERTY="true"
+fi
+
+if [ -n "${TASKS_MAX}" ]
+then
+	TASKS_MAX="TasksMax=${TASKS_MAX}"
+	SET_PROPERTY="true"
+fi
+
+if [ "${SET_PROPERTY}" != "true" ]
+then
+	Usage
+fi
+
+# Run
+systemctl --runtime set-property ${NAME} ${BLOCK_IO_DEVICE_WEIGHT} ${BLOCK_IO_READ_BANDWITH} ${BLOCK_IO_WEIGHT} ${BLOCK_IO_WRITE_BANDWITH} ${CPU_QUOTA} ${CPU_SHARES} ${MEMORY_LIMIT} ${TASKS_MAX}
diff --git a/lib/container/list b/lib/container/list
index d522623..e5e76fe 100755
--- a/lib/container/list
+++ b/lib/container/list
@@ -183,9 +183,9 @@ do
 			;;
 	esac
 
-	if [ -e "${MACHINES}/${CONTAINER}/etc/network/interfaces" ]
+	if ls "${MACHINES}/${CONTAINER}/etc/systemd/network"/*.network > /dev/null 2>&1
 	then
-		ADDRESSES="$(awk '/address/ { print $2 }' ${MACHINES}/${CONTAINER}/etc/network/interfaces)"
+		ADDRESSES="$(awk -F= '/Address/ { print $2 }' ${MACHINES}/${CONTAINER}/etc/systemd/network/*.network)"
 	fi
 
 	ADDRESSES="${ADDRESSES:-n/a}"
diff --git a/lib/container/rename b/lib/container/rename
new file mode 100755
index 0000000..2d27615
--- /dev/null
+++ b/lib/container/rename
@@ -0,0 +1,162 @@
+#!/bin/sh
+
+# container-tools - Manage systemd-nspawn containers
+# Copyright (C) 2014-2016 Daniel Baumann <daniel.baumann@open-infrastructure.net>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+set -e
+
+COMMAND="$(basename ${0})"
+
+CONFIG="/etc/container-tools/config"
+MACHINES="/var/lib/machines"
+
+Parameters ()
+{
+	LONG_OPTIONS="force,new:,old:,"
+	OPTIONS="f,n:,o:,"
+
+	PARAMETERS="$(getopt --longoptions ${LONG_OPTIONS} --name=${COMMAND} --options ${OPTIONS} --shell sh -- ${@})"
+
+	if [ "${?}" != "0" ]
+	then
+		echo "'${COMMAND}': getopt exit" >&2
+		exit 1
+	fi
+
+	eval set -- "${PARAMETERS}"
+
+	while true
+	do
+		case "${1}" in
+			-f|--force)
+				FORCE="true"
+				shift 1
+				;;
+
+			-n|--new)
+				NEW="${2}"
+				shift 2
+				;;
+
+			-o|--old)
+				OLD="${2}"
+				shift 2
+				;;
+
+			--)
+				shift 1
+				break
+				;;
+
+			*)
+				echo "'${COMMAND}': getopt error" >&2
+				exit 1
+				;;
+		esac
+	done
+}
+
+Usage ()
+{
+	echo "Usage: container ${COMMAND} [-f|--force] -n|--new NAME -o|--old NAME" >&2
+	exit 1
+}
+
+Parameters "${@}"
+
+if [ -z "${OLD}" ] || [ -z "${NEW}" ]
+then
+	Usage
+fi
+
+if [ ! -e "${MACHINES}/${OLD}" ]
+then
+	echo "'${OLD}': no such container" >&2
+	exit 1
+fi
+
+if [ ! -e "${MACHINES}/${NEW}" ]
+then
+	echo "'${NEW}': container already exists" >&2
+	exit 1
+fi
+
+STATE="$(machinectl show ${OLD} 2>&1 | awk -F= '/^State=/ { print $2 }')"
+
+case "${STATE}" in
+	running)
+		echo "'${OLD}': container is started" >&2
+		exit 1
+		;;
+esac
+
+case "${FORCE}" in
+	true)
+		;;
+
+	*)
+		if container list --other | grep -qs "^${OLD}$"
+		then
+			echo -n "'${OLD}': rename remote container to '${NEW}' [y|N]? "
+			read FORCE
+
+			FORCE="$(echo ${FORCE} | tr [A-Z] [a-z])"
+
+			case "${FORCE}" in
+				y|yes)
+					;;
+
+				*)
+					exit 1
+					;;
+			esac
+		fi
+		;;
+esac
+
+# Run
+mv "${CONFIG}/${OLD}.conf" "${CONFIG}/${NEW}.conf"
+mv "${MACHINES}/${OLD}" "${MACHINES}/${NEW}"
+
+# Renaming bind mounts
+BIND="$(awk -F= '/^bind=/ { print $2 }' ${CONFIG}/${NAME}.conf)"
+
+if [ -n "${BIND}" ]
+then
+	BINDS="$(echo ${BIND} | sed -e 's|;| |g')"
+
+	for BIND in ${BINDS}
+	do
+		SOURCE_OLD="$(echo ${BIND} | awk -F: '{ print $1 }')"
+		SOURCE_NEW="$(echo ${SOURCE_OLD} | sed -e "s|${OLD}|${NEW}|g")"
+
+		if [ "${SOURCE_OLD}" != "${SOURCE_NEW}" ]
+		then
+			mv "${SOURCE_OLD}" "${SOURCE_NEW}"
+		fi
+
+		TARGET_OLD="$(echo ${BIND} | awk -F: '{ print $2 }')"
+		TARGET_NEW="$(echo ${TARGET_OLD} | sed -e "s|${OLD}|${NEW}|g")"
+
+		if [ "${TARGET_OLD}" != "${TARGET_NEW}" ]
+		then
+			mv "${MACHINES}/${NEW}/${TARGET_OLD}" "${MACHINES}/${NEW}/${TARGET_NEW}"
+		fi
+	done
+fi
+
+# Updating configuration file
+sed -i -e "s|${OLD}|${NEW}|g" "${CONFIG}/${NEW}.conf"
diff --git a/lib/container/stop b/lib/container/stop
index ba8960d..ec24d51 100755
--- a/lib/container/stop
+++ b/lib/container/stop
@@ -27,8 +27,8 @@ CLEAN="false"
 
 Parameters ()
 {
-	LONG_OPTIONS="name:,clean,"
-	OPTIONS="n:,"
+	LONG_OPTIONS="name:,force,clean,"
+	OPTIONS="n:,f,"
 
 	PARAMETERS="$(getopt --longoptions ${LONG_OPTIONS} --name=${COMMAND} --options ${OPTIONS} --shell sh -- ${@})"
 
@@ -48,6 +48,10 @@ Parameters ()
 				shift 2
 				;;
 
+			-f|--force)
+				FORCE="true"
+				;;
+
 			--clean)
 				# internal option
 				CLEAN="true"
@@ -166,5 +170,15 @@ case "${STATE}" in
 		;;
 esac
 
+case "${FORCE}" in
+	true)
+		MODE="terminate"
+		;;
+
+	*)
+		MODE="poweroff"
+		;;
+esac
+
 # Run
-machinectl poweroff ${NAME}
+machinectl ${MODE} ${NAME}
diff --git a/share/bash-completion/container b/share/bash-completion/container
index 3bac382..f6434f8 100644
--- a/share/bash-completion/container
+++ b/share/bash-completion/container
@@ -82,6 +82,46 @@ _container()
 			esac
 			;;
 
+		enter)
+			case "${cur}" in
+				-*)
+					opts="-n --name"
+					COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+					return 0
+					;;
+
+				*)
+					case "${prev}" in
+						-n|--name)
+							opts=$(container list -s -f short)
+							COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+							return 0
+							;;
+					esac
+					;;
+			esac
+			;;
+
+		limit)
+			case "${cur}" in
+				-*)
+					opts="-n --name --blockio-device-weight --blockio-read-bandwith -b --blockio-weight --blockio-write-bandwith -c --cpu-quota --cpu-shares -m --memory-limit -t --tasks-max"
+					COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+					return 0
+					;;
+
+				*)
+					case "${prev}" in
+						-n|--name)
+							opts=$(container list -a -f short)
+							COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+							return 0
+							;;
+					esac
+					;;
+			esac
+			;;
+
 		list)
 			case "${cur}" in
 				-*)
diff --git a/share/config/container.conf.in b/share/config/container.conf.in
index c3268d5..b5678c0 100644
--- a/share/config/container.conf.in
+++ b/share/config/container.conf.in
@@ -14,3 +14,13 @@ machine=@MACHINE@
 network-veth-extra=@NETWORK_VETH_EXTRA@
 private-users=@PRIVATE_USERS@
 register=@REGISTER@
+
+[limit]
+BlockIODeviceWeight=
+BlockIOReadBandwidth=
+BlockIOWeight=
+BlockIOWriteBandwidth=
+CPUQuota=
+CPUShares=
+MemoryLimit=
+TasksMax=
diff --git a/share/doc/HOST-SETUP.txt b/share/doc/HOST-SETUP.txt
index a5aca94..c77f829 100644
--- a/share/doc/HOST-SETUP.txt
+++ b/share/doc/HOST-SETUP.txt
@@ -47,6 +47,8 @@ sysctl -p
 cat > /etc/network/interfaces << EOF
 # /etc/network/interfaces
 
+source /etc/network/interfaces.d/*
+
 auto lo
 iface lo inet loopback
 
@@ -67,6 +69,8 @@ EOF
 cat > /etc/network/interfaces << EOF
 # /etc/network/interfaces
 
+source /etc/network/interfaces.d/*
+
 auto lo
 iface lo inet loopback
 
@@ -94,6 +98,8 @@ EOF
 cat > /etc/network/interfaces << EOF
 # /etc/network/interfaces
 
+source /etc/network/interfaces.d/*
+
 auto lo
 iface lo inet loopback
 
@@ -120,6 +126,8 @@ EOF
 cat > /etc/network/interfaces << EOF
 # /etc/network/interfaces
 
+source /etc/network/interfaces.d/*
+
 auto lo
 iface lo inet loopback
 
diff --git a/share/man/container-enter.1.txt b/share/man/container-enter.1.txt
new file mode 100644
index 0000000..61c0f66
--- /dev/null
+++ b/share/man/container-enter.1.txt
@@ -0,0 +1,72 @@
+// container-tools - Manage systemd-nspawn containers
+// Copyright (C) 2014-2016 Daniel Baumann <daniel.baumann@open-infrastructure.net>
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+CONTAINER-CONSOLE(1)
+====================
+:doctype: manpage
+:man manual: Open Infrastructure
+:man source: container-tools
+:man version: {revnumber}
+
+
+NAME
+----
+container-enter - Enter a container namespace
+
+
+SYNOPSIS
+--------
+*container enter* ['OPTIONS']
+
+
+DESCRIPTION
+-----------
+The container enter enters a container namespace.
+
+
+OPTIONS
+-------
+The following container options are available:
+
+*-n, --name='NAME'*::
+	Specify container name.
+
+
+EXAMPLES
+--------
+*Enter to example.net container namespace:*::
+	sudo container enter -n example.net
+
+
+SEE ALSO
+--------
+container-tools(7),
+container(1).
+
+
+HOMEPAGE
+--------
+More information about container-tools and the Open Infrastructure project can be found on the homepage at https://open-infrastructure.net.
+
+
+BUGS
+----
+Bugs can be reported by sending a bug report to the Debian Bug Tracking System at https://bugs.debian.org.
+
+
+AUTHORS
+-------
+container-tools was written by Daniel Baumann <daniel.baumann@open-infrastructure.net>.
diff --git a/share/man/container-limit.1.txt b/share/man/container-limit.1.txt
new file mode 100644
index 0000000..0ba5b74
--- /dev/null
+++ b/share/man/container-limit.1.txt
@@ -0,0 +1,105 @@
+// container-tools - Manage systemd-nspawn containers
+// Copyright (C) 2014-2016 Daniel Baumann <daniel.baumann@open-infrastructure.net>
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+CONTAINER-LIMIT(1)
+==================
+:doctype: manpage
+:man manual: Open Infrastructure
+:man source: container-tools
+:man version: {revnumber}
+
+
+NAME
+----
+container-limit - Limit ressources of a container
+
+
+SYNOPSIS
+--------
+*container limit* ['OPTIONS']
+
+
+DESCRIPTION
+-----------
+The container limit command limits ressources available to a container at runtime.
+
+
+OPTIONS
+-------
+The following container options are available:
+
+*-n, --name='NAME'*::
+	Specify container name.
+
+*--blockio-device-weight='DEVICE WEIGHT'*::
+	Specify device specific blockio weight, see systemd.resource-control(5).
+
+*--blockio-read-bandwith='DEVICE BYTES'*::
+	Specify device specific blockio read bandwith, see systemd.resource-control(5).
+
+*-b, --blockio-weight='WEIGHT'*::
+	Specify general blockio weight, see systemd.resource-control(5).
+
+*--blockio-write-bandwith='DEVICE BYTES'*::
+	Specify device specific blockio write bandwith, see systemd.resource-control(5).
+
+*-c, --cpu-quota='QUOTA'*::
+	Specify CPU quota, see systemd.resource-control(5).
+
+*--cpu-shares='SHARES'*::
+	Specify CPU shares, see systemd.resource-control(5).
+
+*-m, --memory-limit='BYTES'*::
+	Specify memory limit, see systemd.resource-control(5).
+
+*-t, --tasks-max='NUMBER'*::
+	Specify tasks max, see systemd.resource-control(5).
+
+
+EXAMPLES
+--------
+*Set blockio weight for the example.net container:*::
+	sudo container limit -n example.net --blockio-weight 100
+
+*Set CPU quota for the example.net container:*::
+	sudo container limit -n example.net --cpu-quota 10%
+
+*Set memory limit for the example.net container to 1GB:*::
+	sudo container limit -n example.net --memory-limit 1G
+
+*Set tasks max for the example.net container to 100:*::
+	sudo container limit -n example.net --tasks-max 100
+
+
+SEE ALSO
+--------
+container-tools(7),
+container(1).
+
+
+HOMEPAGE
+--------
+More information about container-tools and the Open Infrastructure project can be found on the homepage at https://open-infrastructure.net.
+
+
+BUGS
+----
+Bugs can be reported by sending a bug report to the Debian Bug Tracking System at https://bugs.debian.org.
+
+
+AUTHORS
+-------
+container-tools was written by Daniel Baumann <daniel.baumann@open-infrastructure.net>.
diff --git a/share/man/container-list.1.txt b/share/man/container-list.1.txt
index 8ac59c2..e0c8fb7 100644
--- a/share/man/container-list.1.txt
+++ b/share/man/container-list.1.txt
@@ -31,6 +31,8 @@ SYNOPSIS
 --------
 *container list* ['OPTIONS']
 
+*container ls* ['OPTIONS']
+
 
 DESCRIPTION
 -----------
diff --git a/share/man/container-remove.1.txt b/share/man/container-remove.1.txt
index cad779f..03c29c2 100644
--- a/share/man/container-remove.1.txt
+++ b/share/man/container-remove.1.txt
@@ -31,6 +31,8 @@ SYNOPSIS
 --------
 *container remove* ['OPTIONS']
 
+*container rm* ['OPTIONS']
+
 
 DESCRIPTION
 -----------
diff --git a/share/man/container-stop.1.txt b/share/man/container-stop.1.txt
index 8b864d6..7531f1c 100644
--- a/share/man/container-stop.1.txt
+++ b/share/man/container-stop.1.txt
@@ -44,12 +44,18 @@ The following container options are available:
 *-n, --name='NAME'*::
 	Specify container name.
 
+*-f, --force*::
+	Instead of running the proper shutdown sequence, terminate all processes of the container imediatly.
+
 
 EXAMPLES
 --------
 *Shutdown example.net container:*::
 	sudo container stop -n example.net
 
+*Immediately stop example.net container:*::
+	sudo container stop -n example.net -f
+
 
 SEE ALSO
 --------
diff --git a/share/man/container.1.txt b/share/man/container.1.txt
index 78a7d68..32bd393 100644
--- a/share/man/container.1.txt
+++ b/share/man/container.1.txt
@@ -67,6 +67,12 @@ The following container commands are available:
 *console*::
 	Attach console to a container, see container-console(1).
 
+*enter*::
+	Enter a container namespace, see container-enter(1).
+
+*limit*::
+	Limit ressources of a container, see container-limit(1).
+
 *list*::
 	List container on the system, see container-list(1).
 
diff --git a/share/scripts/debconf b/share/scripts/debconf
index 4878d98..6fab784 100755
--- a/share/scripts/debconf
+++ b/share/scripts/debconf
@@ -123,6 +123,15 @@ Chroot ()
 		${@}
 }
 
+CIDR ()
+{
+	x=${1##*255.}
+	set -- 0^^^128^192^224^240^248^252^254^ $(( (${#1} - ${#x})*2 )) ${x%%.*}
+
+	x=${1%%$3*}
+	echo $(( $2 + (${#x}/4) ))
+}
+
 Upgrade_system ()
 {
 	DIRECTORY="${1}"
@@ -238,11 +247,11 @@ Debootstrap ()
 	# FIXME: trim down, debootstrap variants?
 	case "${MODE}" in
 		debian)
-			INCLUDE="${INCLUDE},ifupdown,locales,libui-dialog-perl,dialog,isc-dhcp-client,netbase,net-tools,iproute,wget"
+			INCLUDE="${INCLUDE},locales,libui-dialog-perl,dialog,isc-dhcp-client,netbase,net-tools,iproute,wget"
 			;;
 
 		progress-linux)
-			INCLUDE="${INCLUDE},apt-utils,ifupdown,locales-all,libui-dialog-perl,dialog,isc-dhcp-client,netbase,net-tools,iproute,openssh-server,wget"
+			INCLUDE="${INCLUDE},apt-utils,locales-all,libui-dialog-perl,dialog,isc-dhcp-client,netbase,net-tools,iproute,openssh-server,wget"
 			;;
 	esac
 
@@ -735,91 +744,9 @@ EOF
 
 Configure_network ()
 {
-	# Create /etc/network/interfaces
-
 	DIRECTORY="${1}"
 
-cat > "${DIRECTORY}/etc/network/interfaces.tmp" << EOF
-# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
-# /usr/share/doc/ifupdown/examples for more information.
-EOF
-
-	for NUMBER in $(seq 0 ${NETWORK_NUMBER})
-	do
-		eval IPV4_COMMENT="$`echo NETWORK${NUMBER}_IPV4_COMMENT`"
-		eval IPV4_METHOD="$`echo NETWORK${NUMBER}_IPV4_METHOD`"
-		eval IPV4_ADDRESS="$`echo NETWORK${NUMBER}_IPV4_ADDRESS`"
-		eval IPV4_GATEWAY="$`echo NETWORK${NUMBER}_IPV4_GATEWAY`"
-		eval IPV4_NETMASK="$`echo NETWORK${NUMBER}_IPV4_NETMASK`"
-		eval IPV4_POST_UP="$`echo NETWORK${NUMBER}_IPV4_POST_UP`"
-		eval IPV4_POST_DOWN="$`echo NETWORK${NUMBER}_IPV4_POST_DOWN`"
-
-		if [ -z "${IPV4_METHOD}" ]
-		then
-			continue
-		fi
-
-		echo >> "${DIRECTORY}/etc/network/interfaces.tmp"
-
-		if [ -n "${IPV4_COMMENT}" ]
-		then
-			echo "# ${IPV4_COMMENT}" >> "${DIRECTORY}/etc/network/interfaces.tmp"
-		fi
-
-		case "${IPV4_METHOD}" in
-			none)
-
-cat >> "${DIRECTORY}/etc/network/interfaces.tmp" << EOF
-iface eth${NUMBER} inet manual
-EOF
-
-				;;
-
-			dhcp)
-
-cat >> "${DIRECTORY}/etc/network/interfaces.tmp" << EOF
-auto eth${NUMBER}
-iface eth${NUMBER} inet dhcp
-EOF
-
-				;;
-
-			static)
-
-cat >> "${DIRECTORY}/etc/network/interfaces.tmp" << EOF
-auto eth${NUMBER}
-iface eth${NUMBER} inet static
-	address		${IPV4_ADDRESS}
-EOF
-
-				if [ -n "${IPV4_GATEWAY}" ]
-				then
-					echo "	gateway		${IPV4_GATEWAY}" >> "${DIRECTORY}/etc/network/interfaces.tmp"
-				fi
-
-				if [ -n "${IPV4_NETMASK}" ]
-				then
-					echo "	netmask		${IPV4_NETMASK}" >> "${DIRECTORY}/etc/network/interfaces.tmp"
-				fi
-
-				if [ -n "${IPV4_POST_UP}" ]
-				then
-					echo "	post-up		${IPV4_POST_UP}" >> "${DIRECTORY}/etc/network/interfaces.tmp"
-				fi
-
-				if [ -n "${IPV4_POST_DOWN}" ]
-				then
-					echo "	post-down	${IPV4_POST_DOWN}" >> "${DIRECTORY}/etc/network/interfaces.tmp"
-				fi
-				;;
-		esac
-
-		NUMBER="$((${NUMBER} + 1))"
-	done
-
-	mv "${DIRECTORY}/etc/network/interfaces.tmp" "${DIRECTORY}/etc/network/interfaces"
-
-	# create /etc/resolv.conf
+	# Create /etc/resolv.conf
 	rm -f "${DIRECTORY}/etc/resolv.conf.tmp"
 
 	if [ -n "${NAMESERVER_DOMAIN}" ]
@@ -897,6 +824,80 @@ EOF
 	mv "${DIRECTORY}/etc/hosts.tmp" "${DIRECTORY}/etc/hosts"
 }
 
+Configure_systemd_networkd ()
+{
+	# FIXME: postup/postdown: multi-interface route
+
+	DIRECTORY="${1}"
+
+	# Enable systemd-networkd
+	chroot "${DIRECTORY}" apt purge --yes ifupdown || true
+
+	rm -f "${DIRECTORY}/etc/network/interfaces"
+	rmdir --ignore-fail-on-non-empty --parents "${DIRECTORY}"/etc/network/* > /dev/null 2>&1 || true
+
+	chroot "${DIRECTORY}" systemctl enable systemd-networkd
+
+	for NUMBER in $(seq 0 ${NETWORK_NUMBER})
+	do
+		eval IPV4_COMMENT="$`echo NETWORK${NUMBER}_IPV4_COMMENT`"
+		eval IPV4_METHOD="$`echo NETWORK${NUMBER}_IPV4_METHOD`"
+		eval IPV4_ADDRESS="$`echo NETWORK${NUMBER}_IPV4_ADDRESS`"
+		eval IPV4_GATEWAY="$`echo NETWORK${NUMBER}_IPV4_GATEWAY`"
+		eval IPV4_NETMASK="$`echo NETWORK${NUMBER}_IPV4_NETMASK`"
+#		eval IPV4_POST_UP="$`echo NETWORK${NUMBER}_IPV4_POST_UP`"
+#		eval IPV4_POST_DOWN="$`echo NETWORK${NUMBER}_IPV4_POST_DOWN`"
+
+		if [ -z "${IPV4_METHOD}" ]
+		then
+			continue
+		fi
+
+		IPV4_SUFFIX="$(CIDR ${IPV4_NETMASK})"
+		IPV4_CIDR="${IPV4_ADDRESS}/${IPV4_SUFFIX}"
+
+cat > "${DIRECTORY}/etc/systemd/network/eth${NUMBER}.network" << EOF
+[Match]
+Name=eth${NUMBER}
+
+[Network]
+EOF
+
+		if [ -n "${IPV4_COMMENT}" ]
+		then
+			echo "Description=${IPV4_COMMENT}" >> "${DIRECTORY}/etc/systemd/network/eth${NUMBER}.network"
+		fi
+
+		case "${IPV4_METHOD}" in
+			dhcp)
+
+cat >> "${DIRECTORY}/etc/systemd/network/eth${NUMBER}.network" << EOF
+DHCP=ipv4
+EOF
+
+				;;
+
+			static)
+
+cat >> "${DIRECTORY}/etc/systemd/network/eth${NUMBER}.network" << EOF
+DHCP=no
+Address=${IPV4_CIDR}
+EOF
+
+				if [ -n "${IPV4_GATEWAY}" ]
+				then
+
+cat >> "${DIRECTORY}/etc/systemd/network/eth${NUMBER}.network" << EOF
+Gateway=${IPV4_GATEWAY}
+EOF
+
+				fi
+		esac
+
+		NUMBER="$((${NUMBER} + 1))"
+	done
+}
+
 Commands ()
 {
 	DIRECTORY="${1}"
@@ -1045,6 +1046,7 @@ fi
 
 Configure_system "${MACHINES}/${NAME}"
 Configure_network "${MACHINES}/${NAME}"
+Configure_systemd_networkd "${MACHINES}/${NAME}" # FIXME
 Cleanup_system "${MACHINES}/${NAME}"
 
 Commands "${MACHINES}/${NAME}"