diff options
Diffstat (limited to 'system-boot/components')
21 files changed, 3737 insertions, 0 deletions
diff --git a/system-boot/components/0001-init-vars.sh b/system-boot/components/0001-init-vars.sh new file mode 100755 index 0000000..603cf43 --- /dev/null +++ b/system-boot/components/0001-init-vars.sh @@ -0,0 +1,11 @@ +#!/bin/sh + +mountpoint="/run/live/medium" +alt_mountpoint="/media" +LIVE_MEDIA_PATH="live" +HOSTNAME="host" +custom_overlay_label="persistence" +persistence_list="persistence.conf" + +mkdir -p "${mountpoint}" +mkdir -p /var/lib/live/boot diff --git a/system-boot/components/0010-debug b/system-boot/components/0010-debug new file mode 100755 index 0000000..cfb2fc8 --- /dev/null +++ b/system-boot/components/0010-debug @@ -0,0 +1,27 @@ +#!/bin/sh + +#set -e + +Debug () +{ + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + live-boot.debug|debug) + LIVE_BOOT_DEBUG="true" + ;; + esac + done + + case "${LIVE_BOOT_DEBUG}" in + true) + ;; + + *) + return 0 + ;; + esac + + # Write the trace output + set -x +} diff --git a/system-boot/components/0020-read-only b/system-boot/components/0020-read-only new file mode 100755 index 0000000..f56b8cf --- /dev/null +++ b/system-boot/components/0020-read-only @@ -0,0 +1,72 @@ +#!/bin/sh + +#set -e + +Read_only () +{ + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + live-boot.read-only=*|read-only=*) + LIVE_READ_ONLY="true" + LIVE_READ_ONLY_DEVICES="${_PARAMETER#*read-only=}" + ;; + + live-boot.read-only|read-only) + LIVE_READ_ONLY="true" + ;; + esac + done + + case "${LIVE_READ_ONLY}" in + true) + ;; + + *) + return 0 + ;; + esac + + # Marking some block devices as read-only to ensure that nothing + # gets written as linux still writes to 'only' read-only mounted filesystems. + LIVE_READ_ONLY_DEVICES="${LIVE_READ_ONLY_DEVICES:-/dev/sd* /dev/vd*}" + + for _DEVICE in $(echo ${LIVE_READ_ONLY_DEVICES} | sed -e 's|,| |g') + do + if [ ! -b "${_DEVICE}" ] + then + continue + fi + + echo -n "live-boot: Setting ${_DEVICE} read-only..." > /dev/console + + blockdev --setro ${_DEVICE} + _RETURN="${?}" + + case "${_RETURN}" in + 0) + echo " done, use 'blockdev --setrw ${_DEVICE}' to set read-write." > /dev/console + ;; + + *) + echo " failed." > /dev/console + ;; + esac + done + + if grep -qw persistence /proc/cmdline + then + printf " * Persistence mode enabled, searching for persistency related devices to unlock\n" >/dev/console + + for label in custom-ov home-rw home-sn live-rw live-sn persistence + do + if blkid -t LABEL="$label" | grep -q '.' + then + device=$(blkid -t LABEL="$label" | awk -F: '{print $1}') + printf " - Setting device %-9s with label '%s' to write mode for persistence mode: " "$device" "$label" >/dev/console + blockdev --setrw $device && printf "done\n" >/dev/console || printf "failed\n" >/dev/console + fi + done + fi + +} diff --git a/system-boot/components/0030-verify-checksums b/system-boot/components/0030-verify-checksums new file mode 100755 index 0000000..4453558 --- /dev/null +++ b/system-boot/components/0030-verify-checksums @@ -0,0 +1,89 @@ +#!/bin/sh + +#set -e + +Verify_checksums () +{ + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + live-boot.verify-checksums=*|verify-checksums=*) + LIVE_VERIFY_CHECKSUMS="true" + LIVE_VERIFY_CHECKSUMS_DIGESTS="${_PARAMETER#*verify-checksums=}" + ;; + + live-boot.verify-checksums|verify-checksums) + LIVE_VERIFY_CHECKSUMS="true" + ;; + esac + done + + case "${LIVE_VERIFY_CHECKSUMS}" in + true) + ;; + + *) + return 0 + ;; + esac + + _MOUNTPOINT="${1}" + + LIVE_VERIFY_CHECKSUMS_DIGESTS="${LIVE_VERIFY_CHECKSUMS_DIGESTS:-sha512 sha384 sha256 sha224 sha1 md5}" + _TTY="/dev/tty8" + + log_begin_msg "Verifying checksums" + + cd "${_MOUNTPOINT}" + + for _DIGEST in $(echo ${LIVE_VERIFY_CHECKSUMS_DIGESTS} | sed -e 's|,| |g') + do + _CHECKSUMS="$(echo ${_DIGEST} | tr [a-z] [A-Z])SUMS ${_DIGEST}sum.txt" + + for _CHECKSUM in ${_CHECKSUMS} + do + if [ -e "${_CHECKSUM}" ] + then + echo "Found ${_CHECKSUM}..." > "${_TTY}" + + if [ -e "/bin/${_DIGEST}sum" ] + then + echo "Checking ${_CHECKSUM}..." > "${_TTY}" + + # Verify checksums + grep -v '^#' "${_CHECKSUM}" | /bin/${_DIGEST}sum -c > "${_TTY}" + _RETURN="${?}" + + # Stop after first verification + break + else + echo "Not found /bin/${_DIGEST}sum..." > "${_TTY}" + fi + fi + done + done + + log_end_msg + + case "${_RETURN}" in + 0) + log_success_msg "Verification successfull, rebooting in 10 seconds." + sleep 10 + + # Unmount live-media + cd / + umount -f "${_MOUNTPOINT}" > /dev/null 2>&1 + sync + + # Attempt to remount all mounted filesystems read-only + echo u > /proc/sysrq-trigger + + # Immediately reboot the system without syncing or unmounting filesystems + echo b > /proc/sysrq-trigger + ;; + + *) + panic "Verification failed, $(basename ${_TTY}) for more information." + ;; + esac +} diff --git a/system-boot/components/2010-remove-persistence b/system-boot/components/2010-remove-persistence new file mode 100755 index 0000000..717a408 --- /dev/null +++ b/system-boot/components/2010-remove-persistence @@ -0,0 +1,31 @@ +#!/bin/sh + +#set -e + +Remove_persistence () +{ + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + live-boot.persistence-remove=*|persistence-remove=*) + LIVE_PERSISTENCE_REMOVE="${_PARAMETER#*persistence-remove=}" + ;; + + live-boot.persistence-remove|persistence-remove) + LIVE_PERSISTENCE_REMOVE="true" + ;; + esac + done + + case "${LIVE_PERSISTENCE_REMOVE}" in + true) + ;; + + *) + return 0 + ;; + esac + + # Remove persistence + cd /run/live/overlay && find . -not -name 'persistence.conf' | xargs rm -rf +} diff --git a/system-boot/components/3020-swap b/system-boot/components/3020-swap new file mode 100755 index 0000000..345b9a0 --- /dev/null +++ b/system-boot/components/3020-swap @@ -0,0 +1,62 @@ +#!/bin/sh + +#set -e + +Swap () +{ + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + live-boot.swap=*|swap=*) + LIVE_SWAP="true" + LIVE_SWAP_DEVICES="${_PARAMETER#*swap=}" + ;; + + live-boot.swap|swap) + LIVE_SWAP="true" + ;; + esac + done + + case "${LIVE_SWAP}" in + true) + ;; + + *) + return 0 + ;; + esac + + LIVE_SWAP_DEVICES="${LIVE_SWAP_DEVICES:-/dev/sd* /dev/vd*}" + + for _DEVICE in $(echo ${LIVE_SWAP_DEVICES} | sed -e 's|,| |g') + do + if [ ! -b "${_DEVICE}" ] + then + continue + fi + + blkid -o udev -p ${_DEVICE%%[0-9]*} | grep -q "^ID_FS_USAGE=raid" && continue + + _MAGIC="$(/bin/dd if=${_DEVICE} bs=4086 skip=1 count=1 2>/dev/null | /bin/dd bs=10 count=1 2>/dev/null)" || continue + + case "${_MAGIC}" in + SWAPSPACE2|SWAP-SPACE) + _SWAP_DEVICES="${_SWAP_DEVICES} ${_DEVICE}" + ;; + esac + done + + # Remove all auto swap entries + if grep -qs "swap swap" /root/etc/fstab + then + grep -v "swap swap" /root/etc/fstab > /root/etc/fstab.tmp + mv /root/etc/fstab.tmp /root/etc/fstab + fi + + # Add new swap entries + for _DEVICE in ${_SWAP_DEVICES} + do + echo "${_DEVICE} swap swap defaults 0 0" >> /root/etc/fstab + done +} diff --git a/system-boot/components/9990-cmdline-old b/system-boot/components/9990-cmdline-old new file mode 100755 index 0000000..dad5ecb --- /dev/null +++ b/system-boot/components/9990-cmdline-old @@ -0,0 +1,327 @@ +#!/bin/sh + +#set -e + +Cmdline_old () +{ + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + skipconfig) + NOFSTAB="true" + NONETWORKING="true" + + export NOFSTAB NONETWORKING + ;; + + BOOTIF=*) + BOOTIF="${_PARAMETER#BOOTIF=}" + ;; + dns=*) + DNS=${_PARAMETER#dns=} + DNSSERVERS=$(echo ${DNS} | sed 's/,/ /g') + export DNSSERVERS + unset DNS + ;; + dhcp) + # Force dhcp even while netbooting + # Use for debugging in case somebody works on fixing dhclient + DHCP="true"; + export DHCP + ;; + + nodhcp) + DHCP="" + export DHCP + NODHCP="true" + export NODHCP + ;; + + ethdevice=*) + DEVICE="${_PARAMETER#ethdevice=}" + ETHDEVICE="${DEVICE}" + export DEVICE ETHDEVICE + ;; + + ethdevice-timeout=*) + ETHDEV_TIMEOUT="${_PARAMETER#ethdevice-timeout=}" + export ETHDEV_TIMEOUT + ;; + + fetch=*) + FETCH="${_PARAMETER#fetch=}" + export FETCH + ;; + + findiso=*) + FINDISO="${_PARAMETER#findiso=}" + export FINDISO + ;; + + ftpfs=*) + FTPFS="${_PARAMETER#ftpfs=}" + export FTPFS + ;; + + httpfs=*) + HTTPFS="${_PARAMETER#httpfs=}" + export HTTPFS + ;; + + iscsi=*) + ISCSI="${_PARAMETER#iscsi=}" + #ip:port - separated by ; + ISCSI_PORTAL="${ISCSI%;*}" + if echo "${ISCSI_PORTAL}" | grep -q , ; then + ISCSI_SERVER="${ISCSI_PORTAL%,*}" + ISCSI_PORT="${ISCSI_PORTAL#*,}" + fi + #target name + ISCSI_TARGET="${ISCSI#*;}" + export ISCSI ISCSI_PORTAL ISCSI_TARGET ISCSI_SERVER ISCSI_PORT + ;; + + isofrom=*|fromiso=*) + FROMISO="${_PARAMETER#*=}" + export FROMISO + ;; + + ignore_uuid) + IGNORE_UUID="true" + export IGNORE_UUID + ;; + + ip=*) + STATICIP="${_PARAMETER#ip=}" + + if [ -z "${STATICIP}" ] + then + STATICIP="frommedia" + fi + + export STATICIP + ;; + + live-media=*|bootfrom=*) + LIVE_MEDIA="${_PARAMETER#*=}" + export LIVE_MEDIA + ;; + + live-media-uuid=*) + LIVE_MEDIA_UUID="${_PARAMETER#*=}" + export LIVE_MEDIA_UUID + ;; + + live-media-mount-opts=*) + LIVE_MEDIA_MOUNT_OPTS="${_PARAMETER#*=}" + export LIVE_MEDIA_MOUNT_OPTS + ;; + + live-media-encryption=*|encryption=*) + LIVE_MEDIA_ENCRYPTION="${_PARAMETER#*=}" + export LIVE_MEDIA_ENCRYPTION + ;; + + live-media-offset=*) + LIVE_MEDIA_OFFSET="${_PARAMETER#live-media-offset=}" + export LIVE_MEDIA_OFFSET + ;; + + live-media-path=*) + LIVE_MEDIA_PATH="${_PARAMETER#live-media-path=}" + export LIVE_MEDIA_PATH + ;; + + live-media-timeout=*) + LIVE_MEDIA_TIMEOUT="${_PARAMETER#live-media-timeout=}" + export LIVE_MEDIA_TIMEOUT + ;; + + module=*) + MODULE="${_PARAMETER#module=}" + export MODULE + ;; + + netboot=*) + NETBOOT="${_PARAMETER#netboot=}" + export NETBOOT + ;; + + nfsopts=*) + NFSOPTS="${_PARAMETER#nfsopts=}" + export NFSOPTS + ;; + + nfsoverlay=*) + NFS_COW="${_PARAMETER#nfsoverlay=}" + export NFS_COW + ;; + + nofstab) + NOFSTAB="true" + export NOFSTAB + ;; + + nonetworking) + NONETWORKING="true" + export NONETWORKING + ;; + + ramdisk-size=*) + ramdisk_size="${_PARAMETER#ramdisk-size=}" + ;; + + overlay-size=*) + OVERLAY_SIZE="${_PARAMETER#overlay-size=}" + export OVERLAY_SIZE + ;; + + persistence) + PERSISTENCE="true" + export PERSISTENCE + ;; + + persistence-encryption=*) + PERSISTENCE_ENCRYPTION="${_PARAMETER#*=}" + export PERSISTENCE_ENCRYPTION + ;; + + persistence-media=*) + PERSISTENCE_MEDIA="${_PARAMETER#*=}" + export PERSISTENCE_MEDIA + ;; + persistence-method=*) + PERSISTENCE_METHOD="${_PARAMETER#*=}" + export PERSISTENCE_METHOD + ;; + + persistence-path=*) + PERSISTENCE_PATH="${_PARAMETER#persistence-path=}" + export PERSISTENCE_PATH + ;; + persistence-read-only) + PERSISTENCE_READONLY="true" + export PERSISTENCE_READONLY + ;; + + persistence-storage=*) + PERSISTENCE_STORAGE="${_PARAMETER#persistence-storage=}" + export PERSISTENCE_STORAGE + ;; + + persistence-label=*) + custom_overlay_label="${_PARAMETER#persistence-label=*}" + ;; + + nopersistence) + NOPERSISTENCE="true" + export NOPERSISTENCE + ;; + + quickusbmodules) + QUICKUSBMODULES="true" + export QUICKUSBMODULES + ;; + + todisk=*) + TODISK="${_PARAMETER#todisk=}" + export TODISK + ;; + + toram) + TORAM="true" + export TORAM + ;; + + toram=*) + TORAM="true" + MODULETORAM="${_PARAMETER#toram=}" + export TORAM MODULETORAM + ;; + + exposedroot) + EXPOSED_ROOT="true" + export EXPOSED_ROOT + ;; + + plainroot) + PLAIN_ROOT="true" + export PLAIN_ROOT + ;; + + skipunion) + SKIP_UNION_MOUNTS="true" + export SKIP_UNION_MOUNTS + ;; + + root=*) + ROOT="${_PARAMETER#root=}" + export ROOT + ;; + + union=*) + UNIONTYPE="${_PARAMETER#union=}" + export UNIONTYPE + ;; + esac + done + + # sort of compatibility with netboot.h from linux docs + if [ -z "${NETBOOT}" ] + then + if [ "${ROOT}" = "/dev/nfs" ] + then + NETBOOT="nfs" + export NETBOOT + elif [ "${ROOT}" = "/dev/cifs" ] + then + NETBOOT="cifs" + export NETBOOT + fi + fi + + if [ -z "${MODULE}" ] + then + MODULE="filesystem" + export MODULE + fi + + if [ -z "${UNIONTYPE}" ] + then + UNIONTYPE="overlay" + export UNIONTYPE + fi + + if [ -z "${PERSISTENCE_ENCRYPTION}" ] + then + PERSISTENCE_ENCRYPTION="none" + export PERSISTENCE_ENCRYPTION + elif is_in_comma_sep_list luks ${PERSISTENCE_ENCRYPTION} + then + if ! modprobe dm-crypt + then + log_warning_msg "Unable to load module dm-crypt" + PERSISTENCE_ENCRYPTION=$(echo ${PERSISTENCE_ENCRYPTION} | sed -e 's/\<luks,\|,\?luks$//g') + export PERSISTENCE_ENCRYPTION + fi + + if [ ! -x /lib/cryptsetup/askpass ] || [ ! -x /sbin/cryptsetup ] + then + log_warning_msg "cryptsetup is unavailable" + PERSISTENCE_ENCRYPTION=$(echo ${PERSISTENCE_ENCRYPTION} | sed -e 's/\<luks,\|,\?luks$//g') + export PERSISTENCE_ENCRYPTION + fi + fi + + if [ -z "${PERSISTENCE_METHOD}" ] + then + PERSISTENCE_METHOD="overlay" + export PERSISTENCE_METHOD + fi + + if [ -z "${PERSISTENCE_STORAGE}" ] + then + PERSISTENCE_STORAGE="filesystem,file" + export PERSISTENCE_STORAGE + fi +} diff --git a/system-boot/components/9990-fstab.sh b/system-boot/components/9990-fstab.sh new file mode 100755 index 0000000..ba579de --- /dev/null +++ b/system-boot/components/9990-fstab.sh @@ -0,0 +1,25 @@ +#!/bin/sh + +#set -e + +Fstab () +{ + if [ -n "${NOFSTAB}" ] + then + return + fi + + log_begin_msg "Configuring fstab" + + if ! grep -qs "^${UNIONTYPE}" /root/etc/fstab + then + echo "${UNIONTYPE} / ${UNIONTYPE} rw 0 0" >> /root/etc/fstab + fi + + if ! grep -qs "^tmpfs /tmp" /root/etc/fstab + then + echo "tmpfs /tmp tmpfs nosuid,nodev 0 0" >> /root/etc/fstab + fi + + log_end_msg +} diff --git a/system-boot/components/9990-initramfs-tools.sh b/system-boot/components/9990-initramfs-tools.sh new file mode 100755 index 0000000..eb11d23 --- /dev/null +++ b/system-boot/components/9990-initramfs-tools.sh @@ -0,0 +1,75 @@ +#!/bin/sh + +#set -e + +log_wait_msg () +{ + # Print a message and wait for enter + if [ -x /bin/plymouth ] && plymouth --ping + then + plymouth message --text="$@" + plymouth watch-keystroke | read nunya + fi + + _log_msg "Waiting: ${@} ... \n" +} + +# Override maybe_break from scripts/functions +maybe_break() +{ + if [ "${break}" = "$1" ]; then + # Call original panic + . /scripts/functions + panic "Spawning shell within the initramfs" + fi +} + +# Override panic from scripts/functions +panic() +{ + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + panic=*) + panic="${_PARAMETER#*panic=}" + ;; + esac + done + + DEB_1="\033[1;31m .''\`. \033[0m" + DEB_2="\033[1;31m: :' : \033[0m" + DEB_3="\033[1;31m\`. \`'\` \033[0m" + DEB_4="\033[1;31m \`- \033[0m" + + LIVELOG="\033[1;37m/boot.log\033[0m" + DEBUG="\033[1;37mdebug\033[0m" + + # Reset redirections to avoid buffering + exec 1>&6 6>&- + exec 2>&7 7>&- + kill ${tailpid} + + printf "\n\n" + printf " \033[1;37mBOOT FAILED!\033[0m\n" + printf "\n" + printf " This Live System image failed to boot.\n\n" + + printf " Please file a bug against the 'live-boot' package or email the Live Systems\n" + printf " mailing list at <debian-live@lists.debian.org>, making sure to note the\n" + printf " exact version, name and distribution of the image you were attempting to boot.\n\n" + + printf " The file ${LIVELOG} contains some debugging information but booting with the\n" + printf " ${DEBUG} command-line parameter will greatly increase its verbosity which is\n" + printf " extremely useful when diagnosing issues.\n\n" + + if [ -n "${panic}" ]; then + printf " live-boot will now restart your system. " + else + printf " live-boot will now start a shell. " + fi + printf "The error message was:\n\n " + + # Call original panic + . /scripts/functions + panic "$@" +} diff --git a/system-boot/components/9990-main.sh b/system-boot/components/9990-main.sh new file mode 100755 index 0000000..ed48be3 --- /dev/null +++ b/system-boot/components/9990-main.sh @@ -0,0 +1,195 @@ +#!/bin/sh + +# set -e + +Live () +{ + if [ -x /scripts/local-top/cryptroot ] + then + /scripts/local-top/cryptroot + fi + + exec 6>&1 + exec 7>&2 + exec > boot.log + exec 2>&1 + tail -f boot.log >&7 & + tailpid="${!}" + + LIVE_BOOT_CMDLINE="${LIVE_BOOT_CMDLINE:-$(cat /proc/cmdline)}" + Cmdline_old + + Debug + + Read_only + + Select_eth_device + + if [ -e /conf/param.conf ] + then + . /conf/param.conf + fi + + # Needed here too because some things (*cough* udev *cough*) + # changes the timeout + + if [ ! -z "${NETBOOT}" ] || [ ! -z "${FETCH}" ] || [ ! -z "${HTTPFS}" ] || [ ! -z "${FTPFS}" ] + then + if do_netmount + then + livefs_root="${mountpoint}" + else + panic "Unable to find a live file system on the network" + fi + else + if [ -n "${ISCSI_PORTAL}" ] + then + do_iscsi && livefs_root="${mountpoint}" + elif [ -n "${PLAIN_ROOT}" ] && [ -n "${ROOT}" ] + then + # Do a local boot from hd + livefs_root=${ROOT} + else + if [ -x /usr/bin/memdiskfind ] + then + MEMDISK=$(/usr/bin/memdiskfind) + + if [ $? -eq 0 ] + then + # We found a memdisk, set up phram + modprobe phram phram=memdisk,${MEMDISK} + modprobe phram phram=memdisk,${MEMDISK} + + # Load mtdblock, the memdisk will be /dev/mtdblock0 + modprobe mtdblock + fi + fi + + # Scan local devices for the image + i=0 + while [ "$i" -lt 60 ] + do + livefs_root=$(find_livefs ${i}) + + if [ -n "${livefs_root}" ] + then + break + fi + + sleep 1 + i="$(($i + 1))" + done + fi + fi + + if [ -z "${livefs_root}" ] + then + panic "Unable to find a medium containing a live file system" + fi + + Verify_checksums "${livefs_root}" + + if [ "${TORAM}" ] + then + live_dest="ram" + elif [ "${TODISK}" ] + then + live_dest="${TODISK}" + fi + + if [ "${live_dest}" ] + then + log_begin_msg "Copying live media to ${live_dest}" + copy_live_to "${livefs_root}" "${live_dest}" + log_end_msg + fi + + # if we do not unmount the ISO we can't run "fsck /dev/ice" later on + # because the mountpoint is left behind in /proc/mounts, so let's get + # rid of it when running from RAM + if [ -n "$FROMISO" ] && [ "${TORAM}" ] + then + losetup -d /dev/loop0 + + if is_mountpoint /run/live/fromiso + then + umount /run/live/fromiso + rmdir --ignore-fail-on-non-empty /run/live/fromiso \ + >/dev/null 2>&1 || true + fi + fi + + if [ -n "${MODULETORAMFILE}" ] || [ -n "${PLAIN_ROOT}" ] + then + setup_unionfs "${livefs_root}" "${rootmnt}" + else + mac="$(get_mac)" + mac="$(echo ${mac} | sed 's/-//g')" + mount_images_in_directory "${livefs_root}" "${rootmnt}" "${mac}" + fi + + if [ -n "${ROOT_PID}" ] + then + echo "${ROOT_PID}" > "${rootmnt}"/lib/live/root.pid + fi + + log_end_msg + + # aufs2 in kernel versions around 2.6.33 has a regression: + # directories can't be accessed when read for the first the time, + # causing a failure for example when accessing /var/lib/fai + # when booting FAI, this simple workaround solves it + ls /root/* >/dev/null 2>&1 + + # if we do not unmount the ISO we can't run "fsck /dev/ice" later on + # because the mountpoint is left behind in /proc/mounts, so let's get + # rid of it when running from RAM + if [ -n "$FINDISO" ] && [ "${TORAM}" ] + then + losetup -d /dev/loop0 + + if is_mountpoint /run/live/findiso + then + umount /run/live/findiso + rmdir --ignore-fail-on-non-empty /run/live/findiso \ + >/dev/null 2>&1 || true + fi + fi + + if [ -L /root/etc/resolv.conf ] ; then + # assume we have resolvconf + DNSFILE="${rootmnt}/etc/resolvconf/resolv.conf.d/base" + else + DNSFILE="${rootmnt}/etc/resolv.conf" + fi + if [ -f /etc/resolv.conf ] && ! grep -E -q -v '^[[:space:]]*#|^[[:space:]]*$' ${DNSFILE} + then + log_begin_msg "Copying /etc/resolv.conf to ${DNSFILE}" + cp -v /etc/resolv.conf ${DNSFILE} + log_end_msg + fi + + if ! [ -d "/lib/live/boot" ] + then + panic "A wrong rootfs was mounted." + fi + + # avoid breaking existing user scripts that rely on the old path + # this includes code that checks what is mounted on /lib/live/mount/* + # (eg: grep /lib/live /proc/mount) + # XXX: to be removed before the bullseye release + mkdir -p ${rootmnt}/lib/live/mount + mount --rbind /run/live ${rootmnt}/lib/live/mount + + Fstab + Netbase + + Swap + + exec 1>&6 6>&- + exec 2>&7 7>&- + kill ${tailpid} + [ -w "${rootmnt}/var/log/" ] && mkdir -p "${rootmnt}/var/log/live" && ( \ + cp boot.log "${rootmnt}/var/log/live" 2>/dev/null; \ + cp fsck.log "${rootmnt}/var/log/live" 2>/dev/null ) +} diff --git a/system-boot/components/9990-misc-helpers.sh b/system-boot/components/9990-misc-helpers.sh new file mode 100755 index 0000000..2811aaa --- /dev/null +++ b/system-boot/components/9990-misc-helpers.sh @@ -0,0 +1,1713 @@ +#!/bin/sh + +#set -e + +is_live_path() +{ + DIRECTORY="${1}/${LIVE_MEDIA_PATH}" + for FILESYSTEM in squashfs ext2 ext3 ext4 xfs dir jffs + do + if ls "${DIRECTORY}/"*.${FILESYSTEM} > /dev/null 2>&1 + then + return 0 + fi + done + return 1 +} + +matches_uuid () +{ + if [ "${IGNORE_UUID}" ] || ([ ! -e /conf/uuid.conf ] && [ ! "${LIVE_MEDIA_UUID}" ]) + then + return 0 + fi + + path="${1}" + uuid="$(cat /conf/uuid.conf)" + uuid="${LIVE_MEDIA_UUID:-${uuid}}" + + for try_uuid_file in "${path}/.disk/live-uuid"* + do + [ -e "${try_uuid_file}" ] || continue + + try_uuid="$(cat "${try_uuid_file}")" + + if [ "${uuid}" = "${try_uuid}" ] + then + return 0 + fi + done + + return 1 +} + +get_backing_device () +{ + case "${1}" in + *.squashfs|*.ext2|*.ext3|*.ext4|*.jffs2) + echo $(setup_loop "${1}" "loop" "/sys/block/loop*" '0' "${LIVE_MEDIA_ENCRYPTION}" "${2}") + ;; + + *.dir) + echo "directory" + ;; + + *) + panic "Unrecognized live filesystem: ${1}" + ;; + esac +} + +mount_images_in_directory () +{ + directory="${1}" + rootmnt="${2}" + mac="${3}" + + if is_live_path "${directory}" + then + [ -n "${mac}" ] && adddirectory="${directory}/${LIVE_MEDIA_PATH}/${mac}" + setup_unionfs "${directory}/${LIVE_MEDIA_PATH}" "${rootmnt}" "${adddirectory}" + else + panic "No supported filesystem images found at /${LIVE_MEDIA_PATH}." + fi +} + +is_nice_device () +{ + sysfs_path="${1#/sys}" + + if udevadm info --query=all --path="${sysfs_path}" | egrep -q "DEVTYPE=disk" + then + return 0 + elif echo "${sysfs_path}" | grep -q '^/block/vd[a-z]$' + then + return 0 + elif echo ${sysfs_path} | grep -q "^/block/dm-" + then + return 0 + elif echo ${sysfs_path} | grep -q "^/block/mtdblock" + then + return 0 + fi + + return 1 +} + +check_dev () +{ + local force fix + sysdev="${1}" + devname="${2}" + skip_uuid_check="${3}" + mount_opts="${LIVE_MEDIA_MOUNT_OPTS:-ro,noatime}" + + # support for fromiso=.../isofrom=.... + if [ -n "$FROMISO" ] + then + ISO_DEVICE=$(dirname $FROMISO) + if ! [ -b $ISO_DEVICE ] + then + # to support unusual device names like /dev/cciss/c0d0p1 + # as well we have to identify the block device name, let's + # do that for up to 15 levels + i=15 + while [ -n "$ISO_DEVICE" ] && [ "$i" -gt 0 ] + do + ISO_DEVICE=$(dirname ${ISO_DEVICE}) + [ -b "$ISO_DEVICE" ] && break + i=$(($i -1)) + done + fi + + if [ "$ISO_DEVICE" = "/" ] + then + # not a block device, check if it's an iso file, for + # example an ISO when booting on an ONIE system + if echo "${FROMISO}" | grep -q "\.iso$" + then + fs_type=$(get_fstype "${FROMISO}") + if is_supported_fs ${fs_type} + then + mkdir /run/live/fromiso + mount -t $fs_type "${FROMISO}" /run/live/fromiso + if [ "$?" != 0 ] + then + echo "Warning: unable to mount ${FROMISO}." >>/boot.log + fi + devname="/run/live/fromiso" + fi + else + echo "Warning: device for bootoption fromiso= ($FROMISO) not found.">>/boot.log + fi + else + fs_type=$(get_fstype "${ISO_DEVICE}") + if is_supported_fs ${fs_type} + then + mkdir /run/live/fromiso + mount -t $fs_type "$ISO_DEVICE" /run/live/fromiso + ISO_NAME="$(echo $FROMISO | sed "s|$ISO_DEVICE||")" + loopdevname=$(setup_loop "/run/live/fromiso/${ISO_NAME}" "loop" "/sys/block/loop*" "" '') + devname="${loopdevname}" + else + echo "Warning: unable to mount $ISO_DEVICE." >>/boot.log + fi + fi + fi + + if [ -z "${devname}" ] + then + devname=$(sys2dev "${sysdev}") + fi + + if [ -d "${devname}" ] + then + mount -o bind "${devname}" $mountpoint || continue + + if is_live_path $mountpoint + then + echo $mountpoint + return 0 + else + umount $mountpoint + fi + fi + + IFS="," + for device in ${devname} + do + case "$device" in + *mapper*) + # Adding lvm support + if [ -x /scripts/local-top/lvm2 ] + then + ROOT="$device" resume="" /scripts/local-top/lvm2 >>/boot.log + fi + ;; + + /dev/md*) + # Adding raid support + if [ -x /scripts/local-top/mdadm ] + then + [ -r /conf/conf.d/md ] && cp /conf/conf.d/md /conf/conf.d/md.orig + echo "MD_DEVS=$device " >> /conf/conf.d/md + /scripts/local-top/mdadm >>/boot.log + [ -r /conf/conf.d/md.orig ] && mv /conf/conf.d/md.orig /conf/conf.d/md + fi + ;; + esac + done + unset IFS + + [ -n "$device" ] && devname="$device" + + [ -e "$devname" ] || continue + + if [ -n "${LIVE_MEDIA_OFFSET}" ] + then + loopdevname=$(setup_loop "${devname}" "loop" "/sys/block/loop*" "${LIVE_MEDIA_OFFSET}" '') + devname="${loopdevname}" + fi + + fstype=$(get_fstype "${devname}") + + if is_supported_fs ${fstype} + then + devuid=$(blkid -o value -s UUID "$devname") + [ -n "$devuid" ] && grep -qs "\<$devuid\>" /var/lib/live/boot/devices-already-tried-to-mount && continue + + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + forcefsck) + FORCEFSCK="true" + ;; + esac + done + + if [ "${PERSISTENCE_FSCK}" = "true" ] || [ "${PERSISTENCE_FSCK}" = "yes" ] || [ "${FORCEFSCK}" = "true" ] + then + force="" + if [ "$FORCEFSCK" = "true" ] + then + force="-f" + fi + + fix="-a" + if [ "$FSCKFIX" = "true" ] || [ "$FSCKFIX" = "yes" ] + then + fix="-y" + fi + + fsck $fix $force ${devname} >> fsck.log 2>&1 + fi + + mount -t ${fstype} -o "${mount_opts}" "${devname}" ${mountpoint} || continue + [ -n "$devuid" ] && echo "$devuid" >> /var/lib/live/boot/devices-already-tried-to-mount + + if [ -n "${FINDISO}" ] + then + if [ -f ${mountpoint}/${FINDISO} ] + then + umount ${mountpoint} + mkdir -p /run/live/findiso + mount -t ${fstype} -o "${mount_opts}" "${devname}" /run/live/findiso + loopdevname=$(setup_loop "/run/live/findiso/${FINDISO}" "loop" "/sys/block/loop*" 0 "") + devname="${loopdevname}" + mount -t iso9660 -o "${mount_opts}" "${devname}" ${mountpoint} + else + umount ${mountpoint} + fi + fi + + if is_live_path ${mountpoint} && \ + ([ "${skip_uuid_check}" ] || matches_uuid ${mountpoint}) + then + echo ${mountpoint} + return 0 + else + umount ${mountpoint} 2>/dev/null + fi + fi + + if [ -n "${LIVE_MEDIA_OFFSET}" ] + then + losetup -d "${loopdevname}" + fi + + return 1 +} + +find_livefs () +{ + timeout="${1}" + + # first look at the one specified in the command line This is OK + # before the timeout has expired, if more than one device matches the + # criteria the outcome is undefined anyway, so we can pick the first + # one that appears. + case "${LIVE_MEDIA}" in + removable-usb|usb) + for sysblock in $(removable_usb_dev "sys") + do + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + done + ;; + cdrom) + for sysblock in $(removable_cdrom_dev "sys") + do + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + done + ;; + removable) + for sysblock in $(removable_dev "sys") + do + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + done + ;; + + *) + if [ ! -z "${LIVE_MEDIA}" ] + then + if check_dev "null" "${LIVE_MEDIA}" "skip_uuid_check" + then + return 0 + fi + fi + ;; + esac + + # don't start autodetection before timeout has expired + if [ -n "${LIVE_MEDIA_TIMEOUT}" ] + then + if [ "${timeout}" -lt "${LIVE_MEDIA_TIMEOUT}" ] + then + return 1 + fi + fi + + # autodetection of live media + # prefer removable devices over non-removable devices, so scan them first + devices_to_scan="$(removable_dev 'sys') $(non_removable_dev 'sys')" + + for sysblock in $devices_to_scan + do + devname=$(sys2dev "${sysblock}") + [ -e "$devname" ] || continue + fstype=$(get_fstype "${devname}") + + if /lib/udev/cdrom_id ${devname} > /dev/null + then + if check_dev "null" "${devname}" + then + return 0 + fi + elif is_nice_device "${sysblock}" + then + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + elif [ "${fstype}" = "squashfs" -o \ + "${fstype}" = "btrfs" -o \ + "${fstype}" = "ext2" -o \ + "${fstype}" = "ext3" -o \ + "${fstype}" = "ext4" -o \ + "${fstype}" = "jffs2" ] + then + # This is an ugly hack situation, the block device has + # an image directly on it. It's hopefully + # live-boot, so take it and run with it. + ln -s "${devname}" "${devname}.${fstype}" + echo "${devname}.${fstype}" + return 0 + fi + done + + return 1 +} + +is_in_list_separator_helper () +{ + local sep element list + sep=${1} + shift + element=${1} + shift + list=${*} + echo ${list} | grep -qe "^\(.*${sep}\)\?${element}\(${sep}.*\)\?$" +} + +is_in_space_sep_list () +{ + local element + element=${1} + shift + is_in_list_separator_helper "[[:space:]]" "${element}" "${*}" +} + +is_in_comma_sep_list () +{ + local element + element=${1} + shift + is_in_list_separator_helper "," "${element}" "${*}" +} + +sys2dev () +{ + sysdev=${1#/sys} + echo "/dev/$(udevadm info -q name -p ${sysdev} 2>/dev/null|| echo ${sysdev##*/})" +} + +subdevices () +{ + sysblock=${1} + r="" + + for dev in "${sysblock}"/* "${sysblock}" + do + if [ -e "${dev}/dev" ] + then + r="${r} ${dev}" + fi + done + + echo ${r} +} + +storage_devices() +{ + black_listed_devices="${1}" + white_listed_devices="${2}" + + for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "loop|ram|fd") + do + fulldevname=$(sys2dev "${sysblock}") + + if is_in_space_sep_list ${fulldevname} ${black_listed_devices} || \ + [ -n "${white_listed_devices}" ] && \ + ! is_in_space_sep_list ${fulldevname} ${white_listed_devices} + then + # skip this device entirely + continue + fi + + for dev in $(subdevices "${sysblock}") + do + devname=$(sys2dev "${dev}") + + if is_in_space_sep_list ${devname} ${black_listed_devices} + then + # skip this subdevice + continue + else + echo "${devname}" + fi + done + done +} + +is_supported_fs () +{ + fstype="${1}" + + # Validate input first + if [ -z "${fstype}" ] + then + return 1 + fi + + # get_fstype might report "unknown" or "swap", ignore it as no such kernel module exists + if [ "${fstype}" = "unknown" ] || [ "${fstype}" = "swap" ] + then + return 1 + fi + + # Try to look if it is already supported by the kernel + if grep -q ${fstype} /proc/filesystems + then + return 0 + else + # Then try to add support for it the gentle way using the initramfs capabilities + modprobe -q -b ${fstype} + if grep -q ${fstype} /proc/filesystems + then + return 0 + # Then try the hard way if /root is already reachable + else + kmodule="/root/lib/modules/`uname -r`/${fstype}/${fstype}.ko" + if [ -e "${kmodule}" ] + then + insmod "${kmodule}" + if grep -q ${fstype} /proc/filesystems + then + return 0 + fi + fi + fi + fi + + return 1 +} + +get_fstype () +{ + blkid -s TYPE -o value $1 2>/dev/null +} + +where_is_mounted () +{ + device=${1} + # return first found + grep -m1 "^${device} " /proc/mounts | cut -f2 -d ' ' +} + +trim_path () +{ + # remove all unnecessary /:s in the path, including last one (except + # if path is just "/") + echo ${1} | sed 's|//\+|/|g' | sed 's|^\(.*[^/]\)/$|\1|' +} + +what_is_mounted_on () +{ + local dir + dir="$(trim_path ${1})" + grep -m1 "^[^ ]\+ ${dir} " /proc/mounts | cut -d' ' -f1 +} + +chown_ref () +{ + local reference targets owner + reference="${1}" + shift + targets=${@} + owner=$(stat -c %u:%g "${reference}") + chown -h ${owner} ${targets} +} + +chmod_ref () +{ + local reference targets rights + reference="${1}" + shift + targets=${@} + rights=$(stat -c %a "${reference}") + chmod ${rights} ${targets} +} + +lastline () +{ + while read lines + do + line=${lines} + done + + echo "${line}" +} + +base_path () +{ + testpath="${1}" + mounts="$(awk '{print $2}' /proc/mounts)" + testpath="$(realpath ${testpath})" + + while true + do + if echo "${mounts}" | grep -qs "^${testpath}" + then + set -- $(echo "${mounts}" | grep "^${testpath}" | lastline) + echo ${1} + break + else + testpath=$(dirname $testpath) + fi + done +} + +fs_size () +{ + # Returns used/free fs kbytes + 5% more + # You could pass a block device as ${1} or the mount point as ${2} + + dev="${1}" + mountp="${2}" + used="${3}" + + if [ -z "${mountp}" ] + then + mountp="$(where_is_mounted ${dev})" + + if [ -z "${mountp}" ] + then + mountp="/mnt/tmp_fs_size" + + mkdir -p "${mountp}" + mount -t $(get_fstype "${dev}") -o ro "${dev}" "${mountp}" || log_warning_msg "cannot mount -t $(get_fstype ${dev}) -o ro ${dev} ${mountp}" + + doumount=1 + fi + fi + + if [ "${used}" = "used" ] + then + size=$(du -ks ${mountp} | cut -f1) + size=$(expr ${size} + ${size} / 20 ) # FIXME: 5% more to be sure + else + # free space + size="$(df -kP | grep -s ${mountp} | awk '{print $4}')" + fi + + if [ -n "${doumount}" ] + then + umount "${mountp}" || log_warning_msg "cannot umount ${mountp}" + rmdir "${mountp}" + fi + + echo "${size}" +} + +load_keymap () +{ + # Load custom keymap + if [ -x /bin/loadkeys -a -r /etc/boottime.kmap.gz ] + then + loadkeys --quiet /etc/boottime.kmap.gz + fi +} + +setup_loop () +{ + local fspath module pattern offset encryption readonly + fspath=${1} + module=${2} + pattern=${3} + offset=${4} + encryption=${5} + readonly=${6} + + # the output of setup_loop is evaluated in other functions, + # modprobe leaks kernel options like "libata.dma=0" + # as "options libata dma=0" on stdout, causing serious + # problems therefor, so instead always avoid output to stdout + modprobe -q -b "${module}" 1>/dev/null + + udevadm settle + + for loopdev in ${pattern} + do + if [ "$(cat ${loopdev}/size)" -eq 0 ] + then + dev=$(sys2dev "${loopdev}") + options='' + + if [ -n "${readonly}" ] + then + if losetup --help 2>&1 | grep -q -- "-r\b" + then + options="${options} -r" + fi + fi + + if [ -n "${offset}" ] && [ 0 -lt "${offset}" ] + then + options="${options} -o ${offset}" + fi + + if [ -z "${encryption}" ] + then + losetup ${options} "${dev}" "${fspath}" + else + # Loop AES encryption + while true + do + load_keymap + + echo -n "Enter passphrase for root filesystem: " >&6 + read -s passphrase + echo "${passphrase}" > /tmp/passphrase + unset passphrase + exec 9</tmp/passphrase + losetup ${options} -e "${encryption}" -p 9 "${dev}" "${fspath}" + error=${?} + exec 9<&- + rm -f /tmp/passphrase + + if [ 0 -eq ${error} ] + then + unset error + break + fi + + echo + echo -n "There was an error decrypting the root filesystem ... Retry? [Y/n] " >&6 + read answer + + if [ "$(echo "${answer}" | cut -b1 | tr A-Z a-z)" = "n" ] + then + unset answer + break + fi + done + fi + + echo "${dev}" + return 0 + fi + done + + panic "No loop devices available" +} + +try_mount () +{ + dev="${1}" + mountp="${2}" + opts="${3}" + fstype="${4}" + + old_mountp="$(where_is_mounted ${dev})" + + if [ -n "${old_mountp}" ] + then + if [ "${opts}" != "ro" ] + then + mount -o remount,"${opts}" "${dev}" "${old_mountp}" || panic "Remounting ${dev} ${opts} on ${old_mountp} failed" + fi + + mount -o bind "${old_mountp}" "${mountp}" || panic "Cannot bind-mount ${old_mountp} on ${mountp}" + else + if [ -z "${fstype}" ] + then + fstype=$(get_fstype "${dev}") + fi + mount -t "${fstype}" -o "${opts}" "${dev}" "${mountp}" || \ + ( echo "SKIPPING: Cannot mount ${dev} on ${mountp}, fstype=${fstype}, options=${opts}" > boot.log && return 0 ) + fi +} + +# Try to mount $device to the place expected by live-boot. If $device +# is already mounted somewhere, move it to the expected place. If $device +# ends with a "/" this is a directory path. +# If we're only probing $device (to check if it has custom persistence) +# $probe should be set, which suppresses warnings upon failure. On +# success, print the mount point for $device. +mount_persistence_media () +{ + local device probe backing old_backing fstype mount_opts + device=${1} + probe=${2} + + # get_custom_mounts() might call this with a directory path instead + # of a block device path. This means we have found sub-directory path + # underneath /run/live/persistence, so we're done + if [ -d "${device}" ] + then + echo "${device}" + return 0 + fi + + if [ ! -b "${device}" ] + then + return 1 + fi + + backing="/run/live/persistence/$(basename ${device})" + + mkdir -p "${backing}" + old_backing="$(where_is_mounted ${device})" + if [ -z "${old_backing}" ] + then + fstype="$(get_fstype ${device})" + mount_opts="rw,noatime" + if [ -n "${PERSISTENCE_READONLY}" ] + then + mount_opts="ro,noatime" + fi + if mount -t "${fstype}" -o "${mount_opts}" "${device}" "${backing}" >/dev/null + then + echo ${backing} + return 0 + else + [ -z "${probe}" ] && log_warning_msg "Failed to mount persistence media ${device}" + rmdir "${backing}" + return 1 + fi + elif [ "${backing}" != "${old_backing}" ] + then + if ! mount -o move ${old_backing} ${backing} >/dev/null + then + [ -z "${probe}" ] && log_warning_msg "Failed to move persistence media ${device}" + rmdir "${backing}" + return 1 + fi + mount_opts="rw,noatime" + if [ -n "${PERSISTENCE_READONLY}" ] + then + mount_opts="ro,noatime" + fi + if ! mount -o "remount,${mount_opts}" "${backing}" >/dev/null + then + log_warning_msg "Failed to remount persistence media ${device} writable" + # Don't unmount or rmdir the new mountpoint in this case + fi + echo ${backing} + return 0 + else + # This means that $device has already been mounted on + # the place expected by live-boot, so we're done. + echo ${backing} + return 0 + fi +} + +close_persistence_media () +{ + local device backing + device=${1} + backing="$(where_is_mounted ${device})" + + if [ -d "${backing}" ] + then + umount "${backing}" >/dev/null 2>&1 + rmdir "${backing}" >/dev/null 2>&1 + fi + + if is_active_luks_mapping ${device} + then + cryptsetup luksClose ${device} + fi +} + +open_luks_device () +{ + dev="${1}" + name="$(basename ${dev})" + opts="--key-file=-" + if [ -n "${PERSISTENCE_READONLY}" ] + then + opts="${opts} --readonly" + fi + + if cryptsetup status "${name}" >/dev/null 2>&1 + then + re="^[[:space:]]*device:[[:space:]]*\([^[:space:]]*\)$" + opened_dev=$(cryptsetup status ${name} 2>/dev/null | grep "${re}" | sed "s|${re}|\1|") + if [ "${opened_dev}" = "${dev}" ] + then + luks_device="/dev/mapper/${name}" + echo ${luks_device} + return 0 + else + log_warning_msg "Cannot open luks device ${dev} since ${opened_dev} already is opened with its name" + return 1 + fi + fi + + load_keymap + + # check for plymouth + [ -x /bin/plymouth ] && plymouth --ping && plymouth="y" + + # export udisk properties (used to get a nice device label) + unset ID_VENDOR_ENC ID_MODEL_ENC ID_PART_ENTRY_NUMBER + eval $(udevadm info --name=${dev} --query=property -x) + [ -z "${ID_VENDOR_ENC}" -a -z "${ID_MODEL_ENC}" ] && ID_MODEL_ENC="Unidentified device" + label="$(echo -e "${ID_VENDOR_ENC}${ID_MODEL_ENC}, Partition ${ID_PART_ENTRY_NUMBER} (${dev})")" + + if [ "${plymouth}" = "y" ] + then + cryptkeyscript="plymouth ask-for-password --prompt" + # Plymouth will add a : if it is a non-graphical prompt + cryptkeyprompt="Please unlock disk '${label}'" + else + cryptkeyscript="/lib/cryptsetup/askpass" + cryptkeyprompt="Please unlock disk '${label}': " + fi + + while true + do + $cryptkeyscript "$cryptkeyprompt" | \ + /sbin/cryptsetup -T 1 luksOpen ${dev} ${name} ${opts} + + if [ 0 -eq ${?} ] + then + luks_device="/dev/mapper/${name}" + echo ${luks_device} + return 0 + fi + + echo >&6 + retryprompt="There was an error decrypting '${label}' ... Retry? [Y/n]" + + if [ "${plymouth}" == "y" ] + then + plymouth display-message --text "${retryprompt}" + plymouth pause-progress + answer=$(plymouth watch-keystroke --keys="YNyn") + plymouth unpause-progress + else + echo -n "${retryprompt} " >&6 + read answer + fi + + if [ "$(echo "${answer}" | cut -b1 | tr A-Z a-z)" = "n" ] + then + [ "${plymouth}" = "y" ] && plymouth display-message --text "" + return 2 + fi + done +} + +get_gpt_name () +{ + local dev + dev="${1}" + blkid -s PART_ENTRY_NAME -p -o value ${dev} 2>/dev/null +} + +is_gpt_device () +{ + local dev + dev="${1}" + [ "$(blkid -s PART_ENTRY_SCHEME -p -o value ${dev} 2>/dev/null)" = "gpt" ] +} + +probe_for_gpt_name () +{ + local overlays dev gpt_dev gpt_name + overlays="${1}" + dev="${2}" + + gpt_dev="${dev}" + if is_active_luks_mapping ${dev} + then + # if $dev is an opened luks device, we need to check + # GPT stuff on the backing device + gpt_dev=$(get_luks_backing_device "${dev}") + fi + + if ! is_gpt_device ${gpt_dev} + then + return + fi + + gpt_name=$(get_gpt_name ${gpt_dev}) + for label in ${overlays} + do + if [ "${gpt_name}" = "${label}" ] + then + echo "${label}=${dev}" + fi + done +} + +probe_for_fs_label () +{ + local overlays dev + overlays="${1}" + dev="${2}" + + for label in ${overlays} + do + if [ "$(blkid -s LABEL -o value $dev 2>/dev/null)" = "${label}" ] + then + echo "${label}=${dev}" + fi + done +} + +probe_for_file_name () +{ + local overlays dev ret backing + overlays="${1}" + dev="${2}" + + ret="" + backing="$(mount_persistence_media ${dev} probe)" + if [ -z "${backing}" ] + then + return + fi + + for label in ${overlays} + do + path=${backing}/${PERSISTENCE_PATH}/${label} + if [ -f "${path}" ] + then + local loopdev + loopdev=$(setup_loop "${path}" "loop" "/sys/block/loop*") + ret="${ret} ${label}=${loopdev}" + fi + done + + if [ -n "${ret}" ] + then + echo ${ret} + else + # unmount and remove mountpoint + umount ${backing} > /dev/null 2>&1 || true + rmdir ${backing} > /dev/null 2>&1 || true + fi +} + +probe_for_directory_name () +{ + local overlays dev ret backing + overlays="${1}" + dev="${2}" + + ret="" + backing="$(mount_persistence_media ${dev} probe)" + if [ -z "${backing}" ] + then + return + fi + + for label in ${overlays} + do + path=${backing}/${PERSISTENCE_PATH}/${label} + if [ -d "${path}" ] + then + # in this case the "device" ends with a "/" + ret="${ret} ${label}=${backing}/${PERSISTENCE_PATH}/${label%%/}/" + fi + done + + if [ -n "${ret}" ] + then + echo ${ret} + else + # unmount and remove mountpoint + umount ${backing} > /dev/null 2>&1 || true + rmdir ${backing} > /dev/null 2>&1 || true + fi +} + +find_persistence_media () +{ + # Scans devices for overlays, and returns a whitespace + # separated list of how to use them. Only overlays with a partition + # label or file name in ${overlays} are returned. + # + # When scanning a LUKS device, the user will be asked to enter the + # passphrase; on failure to enter it, or if no persistence partitions + # or files were found, the LUKS device is closed. + # + # For all other cases (overlay partition and overlay file) the + # return value is "${label}=${device}", where ${device} a device that + # can mount the content. In the case of an overlay file, the device + # containing the file will remain mounted as a side-effect. + # + # No devices in ${black_listed_devices} will be scanned, and if + # ${white_list_devices} is non-empty, only devices in it will be + # scanned. + + local overlays white_listed_devices ret black_listed_devices + overlays="${1}" + white_listed_devices="${2}" + ret="" + + # + # The devices that are hosting the actual live rootfs should not be + # used for persistence storage since otherwise you might mount a + # parent directory on top of a sub-directory of the same filesystem + # in one union together. + # + black_listed_devices="" + for d in /run/live/rootfs/* /run/live/findiso /run/live/fromiso + do + black_listed_devices="${black_listed_devices} $(what_is_mounted_on d)" + done + + for dev in $(storage_devices "${black_listed_devices}" "${white_listed_devices}") + do + local result luks_device + result="" + + luks_device="" + # Check if it's a luks device; we'll have to open the device + # in order to probe any filesystem it contains, like we do + # below. activate_custom_mounts() also depends on that any luks + # device already has been opened. + if is_in_comma_sep_list luks ${PERSISTENCE_ENCRYPTION} && is_luks_partition ${dev} + then + if luks_device=$(open_luks_device "${dev}") + then + dev="${luks_device}" + else + # skip $dev since we failed/chose not to open it + continue + fi + elif ! is_in_comma_sep_list none ${PERSISTENCE_ENCRYPTION} + then + # skip $dev since we don't allow unencrypted storage + continue + fi + + # Probe for matching GPT partition names or filesystem labels + if is_in_comma_sep_list filesystem ${PERSISTENCE_STORAGE} + then + result=$(probe_for_gpt_name "${overlays}" ${dev}) + if [ -n "${result}" ] + then + ret="${ret} ${result}" + continue + fi + + result=$(probe_for_fs_label "${overlays}" ${dev}) + if [ -n "${result}" ] + then + ret="${ret} ${result}" + continue + fi + fi + + # Probe for files with matching name on mounted partition + if is_in_comma_sep_list file ${PERSISTENCE_STORAGE} + then + result=$(probe_for_file_name "${overlays}" ${dev}) + if [ -n "${result}" ] + then + local loopdevice + loopdevice=${result##*=} + if is_in_comma_sep_list luks ${PERSISTENCE_ENCRYPTION} && is_luks_partition ${loopdevice} + then + local luksfile + luksfile="" + if luksfile=$(open_luks_device "${loopdevice}") + then + result=${result%%=*} + result="${result}=${luksfile}" + else + losetup -d $loopdevice + result="" + fi + fi + ret="${ret} ${result}" + continue + fi + fi + + # Probe for directory with matching name on mounted partition + if is_in_comma_sep_list directory ${PERSISTENCE_STORAGE} + then + result=$(probe_for_directory_name "${overlays}" ${dev}) + if [ -n "${result}" ] + then + ret="${ret} ${result}" + continue + fi + fi + + # Close luks device if it isn't used + if [ -z "${result}" ] && [ -n "${luks_device}" ] && is_active_luks_mapping "${luks_device}" + then + cryptsetup luksClose "${luks_device}" + fi + done + + if [ -n "${ret}" ] + then + echo ${ret} + fi +} + +get_mac () +{ + mac="" + + for adaptor in /sys/class/net/* + do + status="$(cat ${adaptor}/iflink)" + + if [ "${status}" -eq 2 ] + then + mac="$(cat ${adaptor}/address)" + mac="$(echo ${mac} | sed 's/:/-/g' | tr '[a-z]' '[A-Z]')" + fi + done + + echo ${mac} +} + +is_luks_partition () +{ + device="${1}" + cryptsetup isLuks "${device}" 1>/dev/null 2>&1 +} + +is_active_luks_mapping () +{ + device="${1}" + cryptsetup status "${device}" 1>/dev/null 2>&1 +} + +get_luks_backing_device () +{ + device=${1} + cryptsetup status ${device} 2> /dev/null | \ + awk '{if ($1 == "device:") print $2}' +} + +removable_dev () +{ + output_format="${1}" + device_class="${2}" + ret= + + for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|dm-|fd)") + do + if [ ! -d "${sysblock}" ]; then + continue + fi + + dev_ok= + if [ "${device_class}" = "usb" ] && readlink ${sysblock} | grep -Eq "/usb[0-9]+/" + then + # We only want USB and this is an USB device + dev_ok="true" + elif [ "${device_class}" = "cdrom" ] && echo ${sysblock} | grep -Eq "/sr[0-9]+$" + then + # We only want CD-ROM devices and this is such a device + dev_ok="true" + elif [ -z "${device_class}" ] + then + if readlink ${sysblock} | grep -Eq "/(usb[0-9]+|fw[0-9]+|mmc[0-9]+)/" || [ "$(cat ${sysblock}/removable)" = "1" ] + then + # Assume all USB, Firewire and SD cards are external, + # This is the best possible guess, eg. udisks has the same logic + # There is NO property which indicates with certainity if a device is + # removable or not. + # Devices that contain a removable medium are considered removable + # too. Many (older) USB sticks also set this property although it's + # technically wrong. The flash chips are NOT removable from the device. + dev_ok="true" + fi + fi + + if [ "${dev_ok}" = "true" ] + then + case "${output_format}" in + sys) + ret="${ret} ${sysblock}" + ;; + *) + devname=$(sys2dev "${sysblock}") + ret="${ret} ${devname}" + ;; + esac + fi + done + + echo "${ret}" +} + +removable_usb_dev () +{ + output_format="${1}" + + removable_dev "${output_format}" "usb" +} + +removable_cdrom_dev () +{ + output_format="${1}" + + removable_dev "${output_format}" "cdrom" +} + +non_removable_dev () +{ + output_format="${1}" + ret= + + for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|dm-|fd)") + do + if [ ! -d "${sysblock}" ]; then + continue + fi + + if [ "$(cat ${sysblock}/removable)" = "0" ] + then + case "${output_format}" in + sys) + ret="${ret} ${sysblock}" + ;; + *) + devname=$(sys2dev "${sysblock}") + ret="${ret} ${devname}" + ;; + esac + fi + done + + echo "${ret}" +} + +link_files () +{ + # create source's directory structure in dest, and recursively + # create symlinks in dest to to all files in source. if mask + # is non-empty, remove mask from all source paths when + # creating links (will be necessary if we change root, which + # live-boot normally does (into $rootmnt)). + local src_dir dest_dir src_transform + + # remove multiple /:s and ensure ending on / + src_dir="$(trim_path ${1})/" + dest_dir="$(trim_path ${2})/" + src_transform="${3}" + + # This check can only trigger on the inital, non-recursive call since + # we create the destination before recursive calls + if [ ! -d "${dest_dir}" ] + then + log_warning_msg "Must link_files into a directory" + return + fi + + find "${src_dir}" -mindepth 1 -maxdepth 1 | \ + while read src + do + local dest final_src + dest="${dest_dir}$(basename "${src}")" + if [ -d "${src}" ] + then + if [ -z "$(ls -A "${src}")" ] + then + continue + fi + if [ ! -d "${dest}" ] + then + mkdir -p "${dest}" + chown_ref "${src}" "${dest}" + chmod_ref "${src}" "${dest}" + fi + link_files "${src}" "${dest}" "${src_transform}" + else + final_src=${src} + if [ -n "${src_transform}" ] + then + final_src="$(echo ${final_src} | sed "${src_transform}")" + fi + rm -rf "${dest}" 2> /dev/null + ln -s "${final_src}" "${dest}" + chown_ref "${src}" "${dest}" + fi + done +} + +do_union () +{ + local unionmountpoint unionrw unionro + unionmountpoint="${1}" # directory where the union is mounted + shift + unionrw="${1}" # branch where the union changes are stored + shift + unionro="${*}" # space separated list of read-only branches (optional) + + case "${UNIONTYPE}" in + aufs) + rw_opt="rw" + ro_opt="rr+wh" + noxino_opt="noxino" + + unionmountopts="-o noatime,${noxino_opt},dirs=${unionrw}=${rw_opt}" + if [ -n "${unionro}" ] + then + for rofs in ${unionro} + do + unionmountopts="${unionmountopts}:${rofs}=${ro_opt}" + done + fi + ;; + + overlay) + # XXX: can unionro be optional? i.e. can overlay skip lowerdir? + if [ -z "${unionro}" ] + then + panic "overlay needs at least one lower filesystem (read-only branch)." + fi + # Multiple lower layers can now be given using the the colon (":") as a + # separator character between the directory names. + unionro="$(echo ${unionro} | sed -e 's| |:|g')" + # overlayfs requires: + # + a workdir to become mounted + # + workdir and upperdir to reside under the same mount + # + workdir and upperdir to be in separate directories + mkdir "${unionrw}/rw" + mkdir "${unionrw}/work" + unionmountopts="-o noatime,lowerdir=${unionro},upperdir=${unionrw}/rw,workdir=${unionrw}/work" + ;; + esac + + mount -t ${UNIONTYPE} ${unionmountopts} ${UNIONTYPE} "${unionmountpoint}" +} + +get_custom_mounts () +{ + # Side-effect: leaves $devices with persistence.conf mounted in /run/live/persistence + # Side-effect: prints info to file $custom_mounts + + local custom_mounts devices bindings links + custom_mounts=${1} + shift + devices=${@} + + bindings="/tmp/bindings.list" + links="/tmp/links.list" + rm -rf ${bindings} ${links} 2> /dev/null + + for device in ${devices} + do + local device_name backing include_list + device_name="$(basename ${device})" + backing=$(mount_persistence_media ${device}) + if [ -z "${backing}" ] + then + continue + fi + + if [ -r "${backing}/${persistence_list}" ] + then + include_list="${backing}/${persistence_list}" + else + continue + fi + + if [ -n "${LIVE_BOOT_DEBUG}" ] && [ -e "${include_list}" ] + then + cp ${include_list} /run/live/persistence/${persistence_list}.${device_name} + fi + + while read dir options # < ${include_list} + do + if echo ${dir} | grep -qe "^[[:space:]]*\(#.*\)\?$" + then + # skipping empty or commented lines + continue + fi + + if trim_path ${dir} | grep -q -e "^[^/]" -e "^/lib" -e "^/run/live\(/.*\)\?$" -e "^/\(.*/\)\?\.\.\?\(/.*\)\?$" + then + log_warning_msg "Skipping unsafe custom mount ${dir}: must be an absolute path containing neither the \".\" nor \"..\" special dirs, and cannot be \"/lib\", or \"/run/live\" or any of its sub-directories." + continue + fi + + local opt_source opt_link source full_source full_dest + opt_source="" + opt_link="" + for opt in $(echo ${options} | tr ',' ' '); + do + case "${opt}" in + source=*) + opt_source=${opt#source=} + ;; + link) + opt_link="true" + ;; + union|bind) + ;; + *) + log_warning_msg "Skipping custom mount with unknown option: ${opt}" + continue 2 + ;; + esac + done + + source="${dir}" + if [ -n "${opt_source}" ] + then + if echo ${opt_source} | grep -q -e "^/" -e "^\(.*/\)\?\.\.\?\(/.*\)\?$" && [ "${opt_source}" != "." ] + then + log_warning_msg "Skipping unsafe custom mount with option source=${opt_source}: must be either \".\" (the media root) or a relative path w.r.t. the media root that contains neither comas, nor the special \".\" and \"..\" path components" + continue + else + source="${opt_source}" + fi + fi + + full_source="$(trim_path ${backing}/${source})" + full_dest="$(trim_path ${rootmnt}/${dir})" + if [ -n "${opt_link}" ] + then + echo "${device} ${full_source} ${full_dest} ${options}" >> ${links} + else + echo "${device} ${full_source} ${full_dest} ${options}" >> ${bindings} + fi + done < ${include_list} + done + + # We sort the list according to destination so we're sure that + # we won't hide a previous mount. We also ignore duplicate + # destinations in a more or less arbitrary way. + [ -e "${bindings}" ] && sort -k3 -sbu ${bindings} >> ${custom_mounts} && rm ${bindings} + + # After all mounts are considered we add symlinks so they + # won't be hidden by some mount. + [ -e "${links}" ] && cat ${links} >> ${custom_mounts} && rm ${links} + + # We need to make sure that no two custom mounts have the same sources + # or are nested; if that is the case, too much weird stuff can happen. + local prev_source prev_dest + prev_source="impossible source" # first iteration must not match + prev_dest="" + # This sort will ensure that a source /a comes right before a source + # /a/b so we only need to look at the previous source + [ -e ${custom_mounts} ] && sort -k2 -b ${custom_mounts} | + while read device source dest options + do + if echo ${source} | grep -qe "^${prev_source}\(/.*\)\?$" + then + panic "Two persistence mounts have the same or nested sources: ${source} on ${dest}, and ${prev_source} on ${prev_dest}" + fi + prev_source=${source} + prev_dest=${dest} + done +} + +activate_custom_mounts () +{ + local custom_mounts used_devices + custom_mounts="${1}" # the ouput from get_custom_mounts() + used_devices="" + + while read device source dest options # < ${custom_mounts} + do + local opt_bind opt_link opt_union + opt_bind="true" + opt_link="" + opt_union="" + for opt in $(echo ${options} | tr ',' ' '); + do + case "${opt}" in + bind) + opt_bind="true" + unset opt_link opt_union + ;; + link) + opt_link="true" + unset opt_bind opt_union + ;; + union) + opt_union="true" + unset opt_bind opt_link + ;; + esac + done + + if [ -n "$(what_is_mounted_on "${dest}")" ] + then + if [ "${dest}" = "${rootmnt}" ] + then + umount "${dest}" + else + log_warning_msg "Skipping custom mount ${dest}: $(what_is_mounted_on "${dest}") is already mounted there" + continue + fi + fi + + if [ ! -d "${dest}" ] + then + # create the destination and delete existing files in + # its path that are in the way + path="/" + for dir in $(echo ${dest} | sed -e 's|/\+| |g') + do + path=$(trim_path ${path}/${dir}) + if [ -f ${path} ] + then + rm -f ${path} + fi + if [ ! -e ${path} ] + then + mkdir -p ${path} + if echo ${path} | grep -qe "^${rootmnt}/*home/[^/]\+" + then + # if ${dest} is in /home try fixing proper ownership by assuming that the intended user is the first, which is usually the case + # FIXME: this should really be handled by live-config since we don't know for sure which uid a certain user has until then + chown 1000:1000 ${path} + fi + fi + done + fi + + # if ${source} doesn't exist on our persistence media + # we bootstrap it with $dest from the live filesystem. + # this both makes sense and is critical if we're + # dealing with /etc or other system dir. + if [ ! -d "${source}" ] + then + if [ -n "${PERSISTENCE_READONLY}" ] + then + continue + elif [ -n "${opt_union}" ] || [ -n "${opt_link}" ] + then + # unions and don't need to be bootstrapped + # link dirs can't be bootstrapped in a sensible way + mkdir -p "${source}" + chown_ref "${dest}" "${source}" + chmod_ref "${dest}" "${source}" + elif [ -n "${opt_bind}" ] + then + # ensure that $dest is not copied *into* $source + mkdir -p "$(dirname ${source})" + cp -a "${dest}" "${source}" + fi + fi + + # XXX: If CONFIG_AUFS_ROBR is added to the Debian kernel we can + # ignore the loop below and set rootfs_dest_backing=$dest + local rootfs_dest_backing + rootfs_dest_backing="" + if [ -n "${opt_link}" ] || [ -n "${opt_union}" ] + then + for d in /run/live/rootfs/* + do + if [ -n "${rootmnt}" ] + then + fs="${d}/$(echo ${dest} | sed -e "s|${rootmnt}||")" + else + fs="${d}/${dest}" + fi + if [ -d "${fs}" ] + then + rootfs_dest_backing="${rootfs_dest_backing} ${fs}" + fi + done + fi + + local cow_dir links_source + if [ -n "${opt_link}" ] && [ -z "${PERSISTENCE_READONLY}" ] + then + link_files ${source} ${dest} "" + elif [ -n "${opt_link}" ] && [ -n "${PERSISTENCE_READONLY}" ] + then + mkdir -p /run/live/persistence + links_source=$(mktemp -d /run/live/persistence/links-source-XXXXXX) + chown_ref ${source} ${links_source} + chmod_ref ${source} ${links_source} + # We put the cow dir in the below strange place to + # make it absolutely certain that the link source + # has its own directory and isn't nested with some + # other custom mount (if so that mount's files would + # be linked, causing breakage. + cow_dir="/run/live/overlay/run/live/persistence/$(basename ${links_source})" + mkdir -p ${cow_dir} + chown_ref "${source}" "${cow_dir}" + chmod_ref "${source}" "${cow_dir}" + do_union ${links_source} ${cow_dir} ${source} ${rootfs_dest_backing} + link_files ${links_source} ${dest} "s|^${rootmnt}||" + elif [ -n "${opt_union}" ] && [ -z "${PERSISTENCE_READONLY}" ] + then + do_union ${dest} ${source} ${rootfs_dest_backing} + elif [ -n "${opt_bind}" ] && [ -z "${PERSISTENCE_READONLY}" ] + then + mount -o bind "${source}" "${dest}" + elif [ -n "${opt_bind}" -o -n "${opt_union}" ] && [ -n "${PERSISTENCE_READONLY}" ] + then + # bind-mount and union mount are handled the same + # in read-only mode, but note that rootfs_dest_backing + # is non-empty (and necessary) only for unions + cow_dir="/run/live/overlay/${dest}" + if [ -e "${cow_dir}" ] && [ -z "${opt_link}" ] + then + # If an earlier custom mount has files here + # it will "block" the current mount's files + # which is undesirable + rm -rf "${cow_dir}" + fi + mkdir -p ${cow_dir} + chown_ref "${source}" "${cow_dir}" + chmod_ref "${source}" "${cow_dir}" + if [ "${UNIONTYPE}" = "overlay" ] + then + # When we use overlay we add the "/rw" postfix to our source when using it + # as upper layer. Therefore we also have to add it here when using it as + # the lower layer. + source="${source}/rw" + fi + do_union ${dest} ${cow_dir} ${source} ${rootfs_dest_backing} + fi + + PERSISTENCE_IS_ON="1" + export PERSISTENCE_IS_ON + + if echo ${used_devices} | grep -qve "^\(.* \)\?${device}\( .*\)\?$" + then + used_devices="${used_devices} ${device}" + fi + done < ${custom_mounts} + + echo ${used_devices} +} + +is_mountpoint () +{ + directory="$1" + + [ $(stat -fc%d:%D "${directory}") != $(stat -fc%d:%D "${directory}/..") ] +} diff --git a/system-boot/components/9990-mount-cifs.sh b/system-boot/components/9990-mount-cifs.sh new file mode 100755 index 0000000..8dd1818 --- /dev/null +++ b/system-boot/components/9990-mount-cifs.sh @@ -0,0 +1,28 @@ +#!/bin/sh + +#set -e + +do_cifsmount () +{ + rc=1 + + if [ -x "/sbin/mount.cifs" ] + then + if [ -z "${NFSOPTS}" ] + then + CIFSOPTS="-o user=root,password=" + else + CIFSOPTS="-o ${NFSOPTS}" + fi + + log_begin_msg "Trying mount.cifs ${NFSROOT} ${mountpoint} ${CIFSOPTS}" + modprobe -q cifs + + if mount.cifs "${NFSROOT}" "${mountpoint}" ${CIFSOPTS} + then + rc=0 + fi + fi + + return ${rc} +} diff --git a/system-boot/components/9990-mount-http.sh b/system-boot/components/9990-mount-http.sh new file mode 100755 index 0000000..f58c3a3 --- /dev/null +++ b/system-boot/components/9990-mount-http.sh @@ -0,0 +1,93 @@ +#!/bin/sh + +#set -e + +do_httpmount () +{ + rc=1 + + for webfile in HTTPFS FTPFS FETCH + do + local url extension dest + url="$(eval echo \"\$\{${webfile}\}\")" + extension="$(echo "${url}" | sed 's/\(.*\)\.\(.*\)/\2/')" + + if [ -n "$url" ] + then + case "${extension}" in + iso|squashfs|tgz|tar) + if [ "${extension}" = "iso" ] + then + mkdir -p "${alt_mountpoint}" + dest="${alt_mountpoint}" + else + dest="${mountpoint}/${LIVE_MEDIA_PATH}" + mount -t ramfs ram "${mountpoint}" + mkdir -p "${dest}" + fi + case "${url}" in + *:///*) url="${url%%:///*}://${ROOTSERVER}/${url##*:///}" ;; + esac + if [ "${webfile}" = "FETCH" ] + then + case "$url" in + tftp*) + ip="$(dirname $url | sed -e 's|tftp://||g' -e 's|/.*$||g')" + rfile="$(echo $url | sed -e "s|tftp://$ip||g")" + lfile="$(basename $url)" + log_begin_msg "Trying tftp -g -b 65464 -r $rfile -l ${dest}/$lfile $ip" + tftp -g -b 65464 -r $rfile -l ${dest}/$lfile $ip + ;; + + *) + log_begin_msg "Trying wget ${url} -O ${dest}/$(basename ${url})" + wget "${url}" -O "${dest}/$(basename ${url})" + ;; + esac + else + log_begin_msg "Trying to mount ${url} on ${dest}/$(basename ${url})" + if [ "${webfile}" = "FTPFS" ] + then + FUSE_MOUNT="curlftpfs" + url="$(dirname ${url})" + else + FUSE_MOUNT="httpfs" + fi + + modprobe fuse + $FUSE_MOUNT "${url}" "${dest}" + ROOT_PID="$(minips h -C "$FUSE_MOUNT" | { read x y ; echo "$x" ; } )" + fi + [ ${?} -eq 0 ] && rc=0 + [ "${extension}" = "tgz" ] && live_dest="ram" + if [ "${extension}" = "iso" ] + then + isoloop=$(setup_loop "${dest}/$(basename "${url}")" "loop" "/sys/block/loop*" "" '') + mount -t iso9660 "${isoloop}" "${mountpoint}" + rc=${?} + fi + break + ;; + + *) + log_begin_msg "Unrecognized archive extension for ${url}" + ;; + esac + fi + done + + if [ ${rc} != 0 ] + then + if [ -d "${alt_mountpoint}" ] + then + umount "${alt_mountpoint}" + rmdir "${alt_mountpoint}" + fi + umount "${mountpoint}" + elif [ "${webfile}" != "FETCH" ] ; then + NETBOOT="${webfile}" + export NETBOOT + fi + + return ${rc} +} diff --git a/system-boot/components/9990-mount-iscsi.sh b/system-boot/components/9990-mount-iscsi.sh new file mode 100755 index 0000000..c9bab90 --- /dev/null +++ b/system-boot/components/9990-mount-iscsi.sh @@ -0,0 +1,54 @@ +#!/bin/sh + +#set -e + +do_iscsi() +{ + do_netsetup + #modprobe ib_iser + modprobe iscsi_tcp + local debugopt + debugopt="" + [ "${LIVE_BOOT_DEBUG}" = "true" ] && debugopt="-d 8" + #FIXME this name is supposed to be unique - some date + ifconfig hash? + ISCSI_INITIATORNAME="iqn.1993-08.org.debian.live:01:$(echo "${HWADDR}" | sed -e s/://g)" + export ISCSI_INITIATORNAME + if [ -n "${ISCSI_SERVER}" ] ; then + iscsistart $debugopt -i "${ISCSI_INITIATORNAME}" -t "${ISCSI_TARGET}" -g 1 -a "${ISCSI_SERVER}" -p "${ISCSI_PORT}" + else + iscsistart $debugopt -i "${ISCSI_INITIATORNAME}" -t "${ISCSI_TARGET}" -g 1 -a "${ISCSI_PORTAL}" -p 3260 + fi + if [ $? != 0 ] + then + panic "Failed to log into iscsi target" + fi + local host + host="$(ls -d /sys/class/scsi_host/host*/device/iscsi_host:host* \ + /sys/class/scsi_host/host*/device/iscsi_host/host* | sed -e 's:/device.*::' -e 's:.*host::')" + if [ -n "${host}" ] + then + local devices i + devices="" + i=0 + while [ -z "${devices}" -a $i -lt 60 ] + do + sleep 1 + devices="$(ls -d /sys/class/scsi_device/${host}*/device/block:* \ + /sys/class/scsi_device/${host}*/device/block/* | sed -e 's!.*[:/]!!')" + i=$(expr $i + 1) + echo -ne $i\\r + done + for dev in $devices + do + if check_dev "null" "/dev/$dev" + then + NETBOOT="iscsi" + export NETBOOT + return 0; + fi + done + panic "Failed to locate a live device on iSCSI devices (tried: $devices)." + else + panic "Failed to locate iSCSI host in /sys" + fi +} diff --git a/system-boot/components/9990-mount-nfs.sh b/system-boot/components/9990-mount-nfs.sh new file mode 100755 index 0000000..6a3ae55 --- /dev/null +++ b/system-boot/components/9990-mount-nfs.sh @@ -0,0 +1,28 @@ +#!/bin/sh + +#set -e + +do_nfsmount () +{ + rc=1 + + modprobe -q nfs + + if [ -n "${NFSOPTS}" ] + then + NFSOPTS="-o ${NFSOPTS}" + fi + + log_begin_msg "Trying nfsmount -o nolock -o ro ${NFSOPTS} ${NFSROOT} ${mountpoint}" + + # FIXME: This while loop is an ugly HACK round an nfs bug + i=0 + while [ "$i" -lt 60 ] + do + nfsmount -o nolock -o ro ${NFSOPTS} "${NFSROOT}" "${mountpoint}" && rc=0 && break + sleep 1 + i="$(($i + 1))" + done + + return ${rc} +} diff --git a/system-boot/components/9990-netbase.sh b/system-boot/components/9990-netbase.sh new file mode 100755 index 0000000..bae858a --- /dev/null +++ b/system-boot/components/9990-netbase.sh @@ -0,0 +1,139 @@ +#!/bin/sh + +#set -e + +Netbase () +{ + if [ -n "${NONETWORKING}" ] + then + return + fi + + log_begin_msg "Preconfiguring networking" + + IFFILE="/root/etc/network/interfaces" + if [ -L /root/etc/resolv.conf ] ; then + # assume we have resolvconf + DNSFILE="/root/etc/resolvconf/resolv.conf.d/base" + else + DNSFILE="/root/etc/resolv.conf" + fi + + if [ "${STATICIP}" = "frommedia" ] && [ -e "${IFFILE}" ] + then + # will use existent /etc/network/interfaces + log_end_msg + return + fi + +cat > "${IFFILE}" << EOF +auto lo +iface lo inet loopback + +EOF + + udevadm trigger + udevadm settle + + if [ -z "${NETBOOT}" ] && [ -n "${STATICIP}" ] && [ "${STATICIP}" != "frommedia" ] + then + parsed=$(echo "${STATICIP}" | sed -e 's|,| |g') + + for ifline in ${parsed} + do + ifname="$(echo ${ifline} | cut -f1 -d ':')" + ifaddress="$(echo ${ifline} | cut -f2 -d ':')" + ifnetmask="$(echo ${ifline} | cut -f3 -d ':')" + ifgateway="$(echo ${ifline} | cut -f4 -d ':')" + nameserver="$(echo ${ifline} | cut -f5 -d ':')" + +cat >> "${IFFILE}" << EOF +allow-hotplug ${ifname} +iface ${ifname} inet static + address ${ifaddress} + netmask ${ifnetmask} +EOF + + if [ -n "${ifgateway}" ] + then + +cat >> "${IFFILE}" << EOF + gateway ${ifgateway} + +EOF + + fi + + if [ -n "${nameserver}" ] + then + if [ -e "${DNSFILE}" ] + then + grep -v ^nameserver "${DNSFILE}" > "${DNSFILE}.tmp" + mv "${DNSFILE}.tmp" "${DNSFILE}" + fi + + echo "nameserver ${nameserver}" >> "${DNSFILE}" + fi + done + else + if [ -n "${NODHCP}" ] + then + # force DHCP off + method="manual" + elif [ -z "${NETBOOT}" ] || [ -n "${DHCP}" ] + then + # default, dhcp assigned + method="dhcp" + else + # make sure that the preconfigured interface would not get reassigned by dhcp + # on startup by ifup script - otherwise our root fs might be disconnected! + method="manual" + fi + + # iterate the physical interfaces and add them to the interfaces list and also add when ethdevice= called on cmdline + if [ "${method}" != dhcp ] || ([ ! -x /root/usr/sbin/NetworkManager ] && [ ! -x /root/usr/sbin/wicd ]) || [ ! -z "${ETHDEVICE}" ] + then + for interface in /sys/class/net/eth* /sys/class/net/ath* /sys/class/net/wlan* /sys/class/net/en* + do + [ -e ${interface} ] || continue + i="$(basename ${interface})" + +cat >> "${IFFILE}" << EOF +allow-hotplug ${i} +iface ${i} inet ${method} + +EOF + + done + fi + + if [ ! -f "${DNSFILE}" ] || [ -z "$(cat ${DNSFILE})" ] + then + if [ -f /netboot.config ] + then + # create a resolv.conf if it is not present or empty + cp /netboot.config /root/var/log/netboot.config + + rc_search=$(cat netboot.config | awk '/domain/ { print $3 }') + rc_server0="$(cat netboot.config | awk '/dns0/ { print $5 }')" + +cat > $DNSFILE << EOF +search ${rc_search} +domain ${rc_search} +nameserver ${rc_server0} +EOF + + rc_server1=$(cat netboot.config | awk '/dns0/ { print $8 }') + + if [ "${rc_server1}" != "0.0.0.0" ] + then + echo "nameserver ${rc_server1}" >> $DNSFILE + fi + + cat $DNSFILE >> /root/var/log/netboot.config + fi + fi + fi + + log_end_msg +} diff --git a/system-boot/components/9990-netboot.sh b/system-boot/components/9990-netboot.sh new file mode 100755 index 0000000..5054fb8 --- /dev/null +++ b/system-boot/components/9990-netboot.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +#set -e + +do_netmount() +{ + do_netsetup + + if [ "${NFSROOT}" = "auto" ] + then + NFSROOT=${ROOTSERVER}:${ROOTPATH} + fi + + rc=1 + + if ( [ -n "${FETCH}" ] || [ -n "${HTTPFS}" ] || [ -n "${FTPFS}" ] ) + then + do_httpmount + return $? + fi + + if [ "${NFSROOT#*:}" = "${NFSROOT}" ] && [ "$NETBOOT" != "cifs" ] + then + NFSROOT=${ROOTSERVER}:${NFSROOT} + fi + + log_begin_msg "Trying netboot from ${NFSROOT}" + + if [ "${NETBOOT}" != "nfs" ] && do_cifsmount + then + rc=0 + elif do_nfsmount + then + NETBOOT="nfs" + export NETBOOT + rc=0 + fi + + log_end_msg + return ${rc} +} diff --git a/system-boot/components/9990-networking.sh b/system-boot/components/9990-networking.sh new file mode 100755 index 0000000..9cc3674 --- /dev/null +++ b/system-boot/components/9990-networking.sh @@ -0,0 +1,179 @@ +#!/bin/sh + +#set -e + +Device_from_bootif () +{ + # support for Syslinux IPAPPEND parameter + # it sets the BOOTIF variable on the kernel parameter + + if [ -n "${BOOTIF}" ] + then + # pxelinux sets BOOTIF to a value based on the mac address of the + # network card used to PXE boot, so use this value for DEVICE rather + # than a hard-coded device name from initramfs.conf. this facilitates + # network booting when machines may have multiple network cards. + # pxelinux sets BOOTIF to 01-$mac_address + + # strip off the leading "01-", which isn't part of the mac + # address + temp_mac=${BOOTIF#*-} + + # convert to typical mac address format by replacing "-" with ":" + bootif_mac="" + IFS='-' + for x in $temp_mac + do + if [ -z "$bootif_mac" ] + then + bootif_mac="$x" + else + bootif_mac="$bootif_mac:$x" + fi + done + unset IFS + + # look for devices with matching mac address, and set DEVICE to + # appropriate value if match is found. + + for device in /sys/class/net/* + do + if [ -f "$device/address" ] + then + current_mac=$(cat "$device/address") + + if [ "$bootif_mac" = "$current_mac" ] + then + DEVICE=${device##*/} + break + fi + fi + done + fi +} + +do_netsetup () +{ + modprobe -q af_packet # For DHCP + + udevadm trigger + udevadm settle + + [ -n "$ETHDEV_TIMEOUT" ] || ETHDEV_TIMEOUT=15 + echo "Using timeout of $ETHDEV_TIMEOUT seconds for network configuration." + + if [ -z "${NETBOOT}" ] && [ -z "${FETCH}" ] && [ -z "${HTTPFS}" ] && [ -z "${FTPFS}" ] + then + # See if we can select the device from BOOTIF + Device_from_bootif + + # if ethdevice was not specified on the kernel command line + # make sure we try to get a working network configuration + # for *every* present network device (except for loopback of course) + if [ -z "$ETHDEVICE" ] + then + echo "If you want to boot from a specific device use bootoption ethdevice=..." + for device in /sys/class/net/* + do + dev=${device##*/} + if [ "$dev" != "lo" ] + then + ETHDEVICE="$ETHDEVICE $dev" + fi + done + fi + + # split args of ethdevice=eth0,eth1 into "eth0 eth1" + for device in $(echo "$ETHDEVICE" | sed 's/,/ /g') + do + devlist="$devlist $device" + done + + for dev in $devlist + do + echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev" + ipconfig -t "$ETHDEV_TIMEOUT" "$dev" | tee -a /netboot.config + + # if configuration of device worked we should have an assigned + # IP address, if so let's use the device as $DEVICE for later usage. + # simple and primitive approach which seems to work fine + if ifconfig "$dev" | grep -q -E 'inet.*addr:|inet [0-9][0-9]*.[0-9][0-9]*.[0-9][0-9]*.[0-9][0-9]*' + then + export DEVICE="$dev" + break + fi + done + else + for interface in ${DEVICE}; do + ipconfig -t "$ETHDEV_TIMEOUT" "${interface}" | tee "/netboot-${interface}.config" + + [ -e "/run/net-${interface}.conf" ] && . "/run/net-${interface}.conf" + + if [ "$IPV4ADDR" != "0.0.0.0" ] + then + break + fi + done + fi + + for interface in ${DEVICE} + do + # source relevant ipconfig output + OLDHOSTNAME=${HOSTNAME} + + [ -e "/run/net-${interface}.conf" ] && . "/run/net-${interface}.conf" + + [ -z "${HOSTNAME}" ] && HOSTNAME="${OLDHOSTNAME}" + export HOSTNAME + + if [ -n "${interface}" ] + then + HWADDR="$(cat "/sys/class/net/${interface}/address")" + fi + + # Only create /etc/hosts if FQDN is known (to let 'hostname -f' query + # this file). Otherwise DNS will be queried to determine the FQDN. + if [ ! -e "/etc/hosts" ] && [ -n "${DNSDOMAIN}" ] + then + echo "Creating /etc/hosts" + cat > /etc/hosts <<EOF +127.0.0.1 localhost +127.0.1.1 ${HOSTNAME}.${DNSDOMAIN} ${HOSTNAME} + +# The following lines are desirable for IPv6 capable hosts +::1 localhost ip6-localhost ip6-loopback +ff02::1 ip6-allnodes +ff02::2 ip6-allrouters +EOF + fi + + if [ ! -e "/etc/resolv.conf" ] + then + echo "Creating /etc/resolv.conf" + + if [ -n "${DNSDOMAIN}" ] + then + echo "domain ${DNSDOMAIN}" > /etc/resolv.conf + echo "search ${DNSDOMAIN}" >> /etc/resolv.conf + fi + + for i in ${IPV4DNS0} ${IPV4DNS1} ${IPV4DNS1} ${DNSSERVERS} + do + if [ -n "$i" ] && [ "$i" != 0.0.0.0 ] + then + echo "nameserver $i" >> /etc/resolv.conf + fi + done + fi + + # Check if we have a network device at all + if ! ls /sys/class/net/"$interface" > /dev/null 2>&1 && \ + ! ls /sys/class/net/eth0 > /dev/null 2>&1 && \ + ! ls /sys/class/net/wlan0 > /dev/null 2>&1 && \ + ! ls /sys/class/net/ath0 > /dev/null 2>&1 && \ + ! ls /sys/class/net/ra0 > /dev/null 2>&1 + then + panic "No supported network device found, maybe a non-mainline driver is required." + fi + done +} diff --git a/system-boot/components/9990-overlay.sh b/system-boot/components/9990-overlay.sh new file mode 100755 index 0000000..61b1f26 --- /dev/null +++ b/system-boot/components/9990-overlay.sh @@ -0,0 +1,337 @@ +#!/bin/sh + +#set -e + +setup_unionfs () +{ + image_directory="${1}" + rootmnt="${2}" + addimage_directory="${3}" + + modprobe -q -b ${UNIONTYPE} + + if ! cut -f2 /proc/filesystems | grep -q "^${UNIONTYPE}\$" + then + panic "${UNIONTYPE} not available." + fi + + croot="/run/live/rootfs" + + # Let's just mount the read-only file systems first + rootfslist="" + + if [ -z "${PLAIN_ROOT}" ] + then + # Read image names from ${MODULE}.module if it exists + if [ -e "${image_directory}/filesystem.${MODULE}.module" ] + then + for IMAGE in $(cat ${image_directory}/filesystem.${MODULE}.module) + do + image_string="${image_string} ${image_directory}/${IMAGE}" + done + elif [ -e "${image_directory}/${MODULE}.module" ] + then + for IMAGE in $(cat ${image_directory}/${MODULE}.module) + do + image_string="${image_string} ${image_directory}/${IMAGE}" + done + else + # ${MODULE}.module does not exist, create a list of images + for FILESYSTEM in squashfs ext2 ext3 ext4 xfs jffs2 dir + do + for IMAGE in "${image_directory}"/*."${FILESYSTEM}" + do + if [ -e "${IMAGE}" ] + then + image_string="${image_string} ${IMAGE}" + fi + done + done + + if [ -n "${addimage_directory}" ] && [ -d "${addimage_directory}" ] + then + for FILESYSTEM in squashfs ext2 ext3 ext4 xfs jffs2 dir + do + for IMAGE in "${addimage_directory}"/*."${FILESYSTEM}" + do + if [ -e "${IMAGE}" ] + then + image_string="${image_string} ${IMAGE}" + fi + done + done + fi + + # Now sort the list + image_string="$(echo ${image_string} | sed -e 's/ /\n/g' | sort )" + fi + + [ -n "${MODULETORAMFILE}" ] && image_string="${image_directory}/$(basename ${MODULETORAMFILE})" + + mkdir -p "${croot}" + + for image in ${image_string} + do + imagename=$(basename "${image}") + + export image devname + maybe_break live-realpremount + log_begin_msg "Running /scripts/live-realpremount" + run_scripts /scripts/live-realpremount + log_end_msg + + if [ -d "${image}" ] + then + # it is a plain directory: do nothing + rootfslist="${image} ${rootfslist}" + elif [ -f "${image}" ] + then + if losetup --help 2>&1 | grep -q -- "-r\b" + then + backdev=$(get_backing_device "${image}" "-r") + else + backdev=$(get_backing_device "${image}") + fi + fstype=$(get_fstype "${backdev}") + + case "${fstype}" in + unknown) + panic "Unknown file system type on ${backdev} (${image})" + ;; + + "") + fstype="${imagename##*.}" + log_warning_msg "Unknown file system type on ${backdev} (${image}), assuming ${fstype}." + ;; + esac + + mpoint=$(trim_path "${croot}/${imagename}") + rootfslist="${mpoint} ${rootfslist}" + + mkdir -p "${mpoint}" + log_begin_msg "Mounting \"${image}\" on \"${mpoint}\" via \"${backdev}\"" + mount -t "${fstype}" -o ro,noatime "${backdev}" "${mpoint}" || panic "Can not mount ${backdev} (${image}) on ${mpoint}" + log_end_msg + else + log_warning_msg "Could not find image '${image}'. Most likely it is listed in a .module file, perhaps by mistake." + fi + done + else + # we have a plain root system + mkdir -p "${croot}/filesystem" + log_begin_msg "Mounting \"${image_directory}\" on \"${croot}/filesystem\"" + mount -t $(get_fstype "${image_directory}") -o ro,noatime "${image_directory}" "${croot}/filesystem" || \ + panic "Can not mount ${image_directory} on ${croot}/filesystem" && \ + rootfslist="${croot}/filesystem ${rootfslist}" + # probably broken: + mount -o bind ${croot}/filesystem $mountpoint + log_end_msg + fi + + # tmpfs file systems + touch /etc/fstab + mkdir -p /run/live/overlay + + # Looking for persistence devices or files + if [ -n "${PERSISTENCE}" ] && [ -z "${NOPERSISTENCE}" ] + then + + if [ -z "${QUICKUSBMODULES}" ] + then + # Load USB modules + num_block=$(ls -l /sys/block | wc -l) + for module in sd_mod uhci-hcd ehci-hcd ohci-hcd usb-storage + do + modprobe -q -b ${module} + done + + udevadm trigger + udevadm settle + + # For some reason, udevsettle does not block in this scenario, + # so we sleep for a little while. + # + # See https://bugs.launchpad.net/ubuntu/+source/casper/+bug/84591 + for timeout in 5 4 3 2 1 + do + sleep 1 + + if [ $(ls -l /sys/block | wc -l) -gt ${num_block} ] + then + break + fi + done + fi + + local whitelistdev + whitelistdev="" + if [ -n "${PERSISTENCE_MEDIA}" ] + then + case "${PERSISTENCE_MEDIA}" in + removable) + whitelistdev="$(removable_dev)" + ;; + + removable-usb) + whitelistdev="$(removable_usb_dev)" + ;; + esac + if [ -z "${whitelistdev}" ] + then + whitelistdev="ignore_all_devices" + fi + fi + + if is_in_comma_sep_list overlay ${PERSISTENCE_METHOD} + then + overlays="${custom_overlay_label}" + fi + + local overlay_devices + overlay_devices="" + if [ "${whitelistdev}" != "ignore_all_devices" ] + then + for media in $(find_persistence_media "${overlays}" "${whitelistdev}") + do + media="$(echo ${media} | tr ":" " ")" + + case ${media} in + ${custom_overlay_label}=*) + device="${media#*=}" + overlay_devices="${overlay_devices} ${device}" + ;; + esac + done + fi + elif [ -n "${NFS_COW}" ] && [ -z "${NOPERSISTENCE}" ] + then + # check if there are any nfs options + if echo ${NFS_COW} | grep -q ',' + then + nfs_cow_opts="-o nolock,$(echo ${NFS_COW}|cut -d, -f2-)" + nfs_cow=$(echo ${NFS_COW}|cut -d, -f1) + else + nfs_cow_opts="-o nolock" + nfs_cow=${NFS_COW} + fi + + if [ -n "${PERSISTENCE_READONLY}" ] + then + nfs_cow_opts="${nfs_cow_opts},nocto,ro" + fi + + mac="$(get_mac)" + if [ -n "${mac}" ] + then + cowdevice=$(echo ${nfs_cow} | sed "s/client_mac_address/${mac}/") + cow_fstype="nfs" + else + panic "unable to determine mac address" + fi + fi + + if [ -z "${cowdevice}" ] + then + cowdevice="tmpfs" + cow_fstype="tmpfs" + cow_mountopt="rw,noatime,mode=755,size=${OVERLAY_SIZE:-50%}" + fi + + if [ -n "${PERSISTENCE_READONLY}" ] && [ "${cowdevice}" != "tmpfs" ] + then + mount -t tmpfs -o rw,noatime,mode=755,size=${OVERLAY_SIZE:-50%} tmpfs "/run/live/overlay" + root_backing="/run/live/persistence/$(basename ${cowdevice})-root" + mkdir -p ${root_backing} + else + root_backing="/run/live/overlay" + fi + + if [ "${cow_fstype}" = "nfs" ] + then + log_begin_msg \ + "Trying nfsmount ${nfs_cow_opts} ${cowdevice} ${root_backing}" + nfsmount ${nfs_cow_opts} ${cowdevice} ${root_backing} || \ + panic "Can not mount ${cowdevice} (n: ${cow_fstype}) on ${root_backing}" + else + mount -t ${cow_fstype} -o ${cow_mountopt} ${cowdevice} ${root_backing} || \ + panic "Can not mount ${cowdevice} (o: ${cow_fstype}) on ${root_backing}" + fi + + rootfscount=$(echo ${rootfslist} |wc -w) + + rootfs=${rootfslist%% } + + if [ -n "${EXPOSED_ROOT}" ] + then + if [ ${rootfscount} -ne 1 ] + then + panic "only one RO file system supported with exposedroot: ${rootfslist}" + fi + + mount -o bind ${rootfs} ${rootmnt} || \ + panic "bind mount of ${rootfs} failed" + + if [ -z "${SKIP_UNION_MOUNTS}" ] + then + cow_dirs='/var/tmp /var/lock /var/run /var/log /var/spool /home /var/lib/live' + else + cow_dirs='' + fi + else + cow_dirs="/" + fi + + for dir in ${cow_dirs}; do + unionmountpoint=$(trim_path "${rootmnt}${dir}") + mkdir -p ${unionmountpoint} + cow_dir=$(trim_path "/run/live/overlay${dir}") + rootfs_dir="${rootfs}${dir}" + mkdir -p ${cow_dir} + if [ -n "${PERSISTENCE_READONLY}" ] && [ "${cowdevice}" != "tmpfs" ] + then + do_union ${unionmountpoint} ${cow_dir} ${root_backing} ${rootfs_dir} + else + do_union ${unionmountpoint} ${cow_dir} ${rootfs_dir} + fi || panic "mount ${UNIONTYPE} on ${unionmountpoint} failed with option ${unionmountopts}" + done + + # Remove persistence depending on boot parameter + Remove_persistence + + # Correct the permissions of /: + chmod 0755 "${rootmnt}" + + # Correct the permission of /tmp: + if [ -d "${rootmnt}/tmp" ] + then + chmod 1777 "${rootmnt}"/tmp + fi + + # Adding custom persistence + if [ -n "${PERSISTENCE}" ] && [ -z "${NOPERSISTENCE}" ] + then + local custom_mounts + custom_mounts="/tmp/custom_mounts.list" + rm -f ${custom_mounts} + + # Gather information about custom mounts from devies detected as overlays + get_custom_mounts ${custom_mounts} ${overlay_devices} + + [ -n "${LIVE_BOOT_DEBUG}" ] && cp ${custom_mounts} "/run/live/persistence" + + # Now we do the actual mounting (and symlinking) + local used_overlays + used_overlays="" + used_overlays=$(activate_custom_mounts ${custom_mounts}) + rm -f ${custom_mounts} + + # Close unused overlays (e.g. due to missing $persistence_list) + for overlay in ${overlay_devices} + do + if echo ${used_overlays} | grep -qve "^\(.* \)\?${overlay}\( .*\)\?$" + then + close_persistence_media ${overlay} + fi + done + fi +} diff --git a/system-boot/components/9990-select-eth-device.sh b/system-boot/components/9990-select-eth-device.sh new file mode 100755 index 0000000..c8f36b0 --- /dev/null +++ b/system-boot/components/9990-select-eth-device.sh @@ -0,0 +1,108 @@ +#!/bin/sh + +Select_eth_device () +{ + # Boot type in initramfs's config + bootconf=$(egrep '^BOOT=' /conf/initramfs.conf | tail -1) + + # can be superseded by command line (used by Debian-Live's netboot for example) + for ARGUMENT in ${LIVE_BOOT_CMDLINE} + do + case "${ARGUMENT}" in + netboot=*) + NETBOOT="${ARGUMENT#netboot=}" + ;; + esac + done + + if [ "$bootconf" != "BOOT=nfs" ] && [ -z "$NETBOOT" ] && [ -z "$FETCH" ] && [ -z "$FTPFS" ] && [ -z "$HTTPFS" ] + then + # Not a net boot : nothing to do + return + fi + + # we want to do some basic IP + modprobe -q af_packet + + # Ensure all our net modules get loaded so we can actually compare MAC addresses... + udevadm trigger + udevadm settle + + # Available Ethernet interfaces ? + l_interfaces="" + + # See if we can derive the boot device + Device_from_bootif + + if [ -z "$DEVICE" ] + then + echo "Waiting for ethernet card(s) up... If this fails, maybe the ethernet card is not supported by the kernel `uname -r`?" + while [ -z "$l_interfaces" ] + do + l_interfaces="$(cd /sys/class/net/ && ls -d * 2>/dev/null | grep -v "lo")" + done + + if [ $(echo $l_interfaces | wc -w) -lt 2 ] + then + # only one interface : no choice + echo "DEVICE=$l_interfaces" >> /conf/param.conf + return + fi + + # If user force to use specific device, write it + for ARGUMENT in ${LIVE_BOOT_CMDLINE} + do + case "${ARGUMENT}" in + live-netdev=*) + NETDEV="${ARGUMENT#live-netdev=}" + echo "DEVICE=$NETDEV" >> /conf/param.conf + echo "Found live-netdev parameter, forcing to to use network device $NETDEV." + return + ;; + esac + done + else + l_interfaces="$DEVICE" + fi + + found_eth_dev="" + while true + do + echo -n "Looking for a connected Ethernet interface ..." + + for interface in $l_interfaces + do + # ATTR{carrier} is not set if this is not done + echo -n " $interface ?" + ipconfig -c none -d $interface -t 1 >/dev/null 2>&1 + done + + echo '' + + for step in 1 2 3 4 5 + do + for interface in $l_interfaces + do + carrier=$(cat /sys/class/net/$interface/carrier \ + 2>/dev/null) + # link detected + + case "${carrier}" in + 1) + echo "Connected $interface found" + # inform initrd's init script : + found_eth_dev="$found_eth_dev $interface" + ;; + esac + done + if [ -n "$found_eth_dev" ] + then + echo "DEVICE='$found_eth_dev'" >> /conf/param.conf + return + else + # wait a bit + sleep 1 + fi + done + done +} diff --git a/system-boot/components/9990-toram-todisk.sh b/system-boot/components/9990-toram-todisk.sh new file mode 100755 index 0000000..5b76d54 --- /dev/null +++ b/system-boot/components/9990-toram-todisk.sh @@ -0,0 +1,103 @@ +#!/bin/sh + +#set -e + +copy_live_to () +{ + copyfrom="${1}" + copytodev="${2}" + copyto="${copyfrom}_swap" + + if [ -z "${MODULETORAM}" ] + then + size=$(fs_size "" ${copyfrom}/ "used") + else + MODULETORAMFILE="${copyfrom}/${LIVE_MEDIA_PATH}/${MODULETORAM}" + + if [ -f "${MODULETORAMFILE}" ] + then + size=$( expr $(ls -la ${MODULETORAMFILE} | awk '{print $5}') / 1024 + 5000 ) + else + log_warning_msg "Error: toram-module ${MODULETORAM} (${MODULETORAMFILE}) could not be read." + return 1 + fi + fi + + if [ "${copytodev}" = "ram" ] + then + # copying to ram: + freespace=$(awk '/^MemFree:/{f=$2} /^Cached:/{c=$2} END{print f+c}' /proc/meminfo) + mount_options="-o size=${size}k" + free_string="memory" + fstype="tmpfs" + dev="/dev/shm" + else + # it should be a writable block device + if [ -b "${copytodev}" ] + then + dev="${copytodev}" + free_string="space" + fstype=$(get_fstype "${dev}") + freespace=$(fs_size "${dev}") + else + log_warning_msg "${copytodev} is not a block device." + return 1 + fi + fi + + if [ "${freespace}" -lt "${size}" ] + then + log_warning_msg "Not enough free ${free_string} (${freespace}k free, ${size}k needed) to copy live media in ${copytodev}." + return 1 + fi + + # Custom ramdisk size + if [ -z "${mount_options}" ] && [ -n "${ramdisk_size}" ] + then + # FIXME: should check for wrong values + mount_options="-o size=${ramdisk_size}" + fi + + # begin copying (or uncompressing) + mkdir "${copyto}" + log_begin_msg "mount -t ${fstype} ${mount_options} ${dev} ${copyto}" + mount -t "${fstype}" ${mount_options} "${dev}" "${copyto}" + + if [ "${extension}" = "tgz" ] + then + cd "${copyto}" + tar zxf "${copyfrom}/${LIVE_MEDIA_PATH}/$(basename ${FETCH})" + rm -f "${copyfrom}/${LIVE_MEDIA_PATH}/$(basename ${FETCH})" + mount -r -o move "${copyto}" "${rootmnt}" + cd "${OLDPWD}" + else + if [ -n "${MODULETORAMFILE}" ] + then + if [ -x /bin/rsync ] + then + echo " * Copying $MODULETORAMFILE to RAM" 1>/dev/console + rsync -a --progress ${MODULETORAMFILE} ${copyto} 1>/dev/console # copy only the filesystem module + else + cp ${MODULETORAMFILE} ${copyto} # copy only the filesystem module + fi + else + if [ -x /bin/rsync ] + then + echo " * Copying whole medium to RAM" 1>/dev/console + rsync -a --progress ${copyfrom}/* ${copyto} 1>/dev/console # "cp -a" from busybox also copies hidden files + else + cp -a ${copyfrom}/* ${copyto}/ + if [ -e ${copyfrom}/${LIVE_MEDIA_PATH}/.disk ] + then + cp -a ${copyfrom}/${LIVE_MEDIA_PATH}/.disk ${copyto} + fi + fi + fi + + umount ${copyfrom} + mount -r -o move ${copyto} ${copyfrom} + fi + + rmdir ${copyto} + return 0 +} |