From 32322960234c8ec91e0d42835a3ec5ee63305070 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 2 Feb 2019 11:00:00 +0100 Subject: Adding upstream version 20190202. Signed-off-by: Daniel Baumann --- system-boot/components/9990-misc-helpers.sh | 1713 +++++++++++++++++++++++++++ 1 file changed, 1713 insertions(+) create mode 100755 system-boot/components/9990-misc-helpers.sh (limited to 'system-boot/components/9990-misc-helpers.sh') diff --git a/system-boot/components/9990-misc-helpers.sh b/system-boot/components/9990-misc-helpers.sh new file mode 100755 index 0000000..2811aaa --- /dev/null +++ b/system-boot/components/9990-misc-helpers.sh @@ -0,0 +1,1713 @@ +#!/bin/sh + +#set -e + +is_live_path() +{ + DIRECTORY="${1}/${LIVE_MEDIA_PATH}" + for FILESYSTEM in squashfs ext2 ext3 ext4 xfs dir jffs + do + if ls "${DIRECTORY}/"*.${FILESYSTEM} > /dev/null 2>&1 + then + return 0 + fi + done + return 1 +} + +matches_uuid () +{ + if [ "${IGNORE_UUID}" ] || ([ ! -e /conf/uuid.conf ] && [ ! "${LIVE_MEDIA_UUID}" ]) + then + return 0 + fi + + path="${1}" + uuid="$(cat /conf/uuid.conf)" + uuid="${LIVE_MEDIA_UUID:-${uuid}}" + + for try_uuid_file in "${path}/.disk/live-uuid"* + do + [ -e "${try_uuid_file}" ] || continue + + try_uuid="$(cat "${try_uuid_file}")" + + if [ "${uuid}" = "${try_uuid}" ] + then + return 0 + fi + done + + return 1 +} + +get_backing_device () +{ + case "${1}" in + *.squashfs|*.ext2|*.ext3|*.ext4|*.jffs2) + echo $(setup_loop "${1}" "loop" "/sys/block/loop*" '0' "${LIVE_MEDIA_ENCRYPTION}" "${2}") + ;; + + *.dir) + echo "directory" + ;; + + *) + panic "Unrecognized live filesystem: ${1}" + ;; + esac +} + +mount_images_in_directory () +{ + directory="${1}" + rootmnt="${2}" + mac="${3}" + + if is_live_path "${directory}" + then + [ -n "${mac}" ] && adddirectory="${directory}/${LIVE_MEDIA_PATH}/${mac}" + setup_unionfs "${directory}/${LIVE_MEDIA_PATH}" "${rootmnt}" "${adddirectory}" + else + panic "No supported filesystem images found at /${LIVE_MEDIA_PATH}." + fi +} + +is_nice_device () +{ + sysfs_path="${1#/sys}" + + if udevadm info --query=all --path="${sysfs_path}" | egrep -q "DEVTYPE=disk" + then + return 0 + elif echo "${sysfs_path}" | grep -q '^/block/vd[a-z]$' + then + return 0 + elif echo ${sysfs_path} | grep -q "^/block/dm-" + then + return 0 + elif echo ${sysfs_path} | grep -q "^/block/mtdblock" + then + return 0 + fi + + return 1 +} + +check_dev () +{ + local force fix + sysdev="${1}" + devname="${2}" + skip_uuid_check="${3}" + mount_opts="${LIVE_MEDIA_MOUNT_OPTS:-ro,noatime}" + + # support for fromiso=.../isofrom=.... + if [ -n "$FROMISO" ] + then + ISO_DEVICE=$(dirname $FROMISO) + if ! [ -b $ISO_DEVICE ] + then + # to support unusual device names like /dev/cciss/c0d0p1 + # as well we have to identify the block device name, let's + # do that for up to 15 levels + i=15 + while [ -n "$ISO_DEVICE" ] && [ "$i" -gt 0 ] + do + ISO_DEVICE=$(dirname ${ISO_DEVICE}) + [ -b "$ISO_DEVICE" ] && break + i=$(($i -1)) + done + fi + + if [ "$ISO_DEVICE" = "/" ] + then + # not a block device, check if it's an iso file, for + # example an ISO when booting on an ONIE system + if echo "${FROMISO}" | grep -q "\.iso$" + then + fs_type=$(get_fstype "${FROMISO}") + if is_supported_fs ${fs_type} + then + mkdir /run/live/fromiso + mount -t $fs_type "${FROMISO}" /run/live/fromiso + if [ "$?" != 0 ] + then + echo "Warning: unable to mount ${FROMISO}." >>/boot.log + fi + devname="/run/live/fromiso" + fi + else + echo "Warning: device for bootoption fromiso= ($FROMISO) not found.">>/boot.log + fi + else + fs_type=$(get_fstype "${ISO_DEVICE}") + if is_supported_fs ${fs_type} + then + mkdir /run/live/fromiso + mount -t $fs_type "$ISO_DEVICE" /run/live/fromiso + ISO_NAME="$(echo $FROMISO | sed "s|$ISO_DEVICE||")" + loopdevname=$(setup_loop "/run/live/fromiso/${ISO_NAME}" "loop" "/sys/block/loop*" "" '') + devname="${loopdevname}" + else + echo "Warning: unable to mount $ISO_DEVICE." >>/boot.log + fi + fi + fi + + if [ -z "${devname}" ] + then + devname=$(sys2dev "${sysdev}") + fi + + if [ -d "${devname}" ] + then + mount -o bind "${devname}" $mountpoint || continue + + if is_live_path $mountpoint + then + echo $mountpoint + return 0 + else + umount $mountpoint + fi + fi + + IFS="," + for device in ${devname} + do + case "$device" in + *mapper*) + # Adding lvm support + if [ -x /scripts/local-top/lvm2 ] + then + ROOT="$device" resume="" /scripts/local-top/lvm2 >>/boot.log + fi + ;; + + /dev/md*) + # Adding raid support + if [ -x /scripts/local-top/mdadm ] + then + [ -r /conf/conf.d/md ] && cp /conf/conf.d/md /conf/conf.d/md.orig + echo "MD_DEVS=$device " >> /conf/conf.d/md + /scripts/local-top/mdadm >>/boot.log + [ -r /conf/conf.d/md.orig ] && mv /conf/conf.d/md.orig /conf/conf.d/md + fi + ;; + esac + done + unset IFS + + [ -n "$device" ] && devname="$device" + + [ -e "$devname" ] || continue + + if [ -n "${LIVE_MEDIA_OFFSET}" ] + then + loopdevname=$(setup_loop "${devname}" "loop" "/sys/block/loop*" "${LIVE_MEDIA_OFFSET}" '') + devname="${loopdevname}" + fi + + fstype=$(get_fstype "${devname}") + + if is_supported_fs ${fstype} + then + devuid=$(blkid -o value -s UUID "$devname") + [ -n "$devuid" ] && grep -qs "\<$devuid\>" /var/lib/live/boot/devices-already-tried-to-mount && continue + + for _PARAMETER in ${LIVE_BOOT_CMDLINE} + do + case "${_PARAMETER}" in + forcefsck) + FORCEFSCK="true" + ;; + esac + done + + if [ "${PERSISTENCE_FSCK}" = "true" ] || [ "${PERSISTENCE_FSCK}" = "yes" ] || [ "${FORCEFSCK}" = "true" ] + then + force="" + if [ "$FORCEFSCK" = "true" ] + then + force="-f" + fi + + fix="-a" + if [ "$FSCKFIX" = "true" ] || [ "$FSCKFIX" = "yes" ] + then + fix="-y" + fi + + fsck $fix $force ${devname} >> fsck.log 2>&1 + fi + + mount -t ${fstype} -o "${mount_opts}" "${devname}" ${mountpoint} || continue + [ -n "$devuid" ] && echo "$devuid" >> /var/lib/live/boot/devices-already-tried-to-mount + + if [ -n "${FINDISO}" ] + then + if [ -f ${mountpoint}/${FINDISO} ] + then + umount ${mountpoint} + mkdir -p /run/live/findiso + mount -t ${fstype} -o "${mount_opts}" "${devname}" /run/live/findiso + loopdevname=$(setup_loop "/run/live/findiso/${FINDISO}" "loop" "/sys/block/loop*" 0 "") + devname="${loopdevname}" + mount -t iso9660 -o "${mount_opts}" "${devname}" ${mountpoint} + else + umount ${mountpoint} + fi + fi + + if is_live_path ${mountpoint} && \ + ([ "${skip_uuid_check}" ] || matches_uuid ${mountpoint}) + then + echo ${mountpoint} + return 0 + else + umount ${mountpoint} 2>/dev/null + fi + fi + + if [ -n "${LIVE_MEDIA_OFFSET}" ] + then + losetup -d "${loopdevname}" + fi + + return 1 +} + +find_livefs () +{ + timeout="${1}" + + # first look at the one specified in the command line This is OK + # before the timeout has expired, if more than one device matches the + # criteria the outcome is undefined anyway, so we can pick the first + # one that appears. + case "${LIVE_MEDIA}" in + removable-usb|usb) + for sysblock in $(removable_usb_dev "sys") + do + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + done + ;; + cdrom) + for sysblock in $(removable_cdrom_dev "sys") + do + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + done + ;; + removable) + for sysblock in $(removable_dev "sys") + do + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + done + ;; + + *) + if [ ! -z "${LIVE_MEDIA}" ] + then + if check_dev "null" "${LIVE_MEDIA}" "skip_uuid_check" + then + return 0 + fi + fi + ;; + esac + + # don't start autodetection before timeout has expired + if [ -n "${LIVE_MEDIA_TIMEOUT}" ] + then + if [ "${timeout}" -lt "${LIVE_MEDIA_TIMEOUT}" ] + then + return 1 + fi + fi + + # autodetection of live media + # prefer removable devices over non-removable devices, so scan them first + devices_to_scan="$(removable_dev 'sys') $(non_removable_dev 'sys')" + + for sysblock in $devices_to_scan + do + devname=$(sys2dev "${sysblock}") + [ -e "$devname" ] || continue + fstype=$(get_fstype "${devname}") + + if /lib/udev/cdrom_id ${devname} > /dev/null + then + if check_dev "null" "${devname}" + then + return 0 + fi + elif is_nice_device "${sysblock}" + then + for dev in $(subdevices "${sysblock}") + do + if check_dev "${dev}" + then + return 0 + fi + done + elif [ "${fstype}" = "squashfs" -o \ + "${fstype}" = "btrfs" -o \ + "${fstype}" = "ext2" -o \ + "${fstype}" = "ext3" -o \ + "${fstype}" = "ext4" -o \ + "${fstype}" = "jffs2" ] + then + # This is an ugly hack situation, the block device has + # an image directly on it. It's hopefully + # live-boot, so take it and run with it. + ln -s "${devname}" "${devname}.${fstype}" + echo "${devname}.${fstype}" + return 0 + fi + done + + return 1 +} + +is_in_list_separator_helper () +{ + local sep element list + sep=${1} + shift + element=${1} + shift + list=${*} + echo ${list} | grep -qe "^\(.*${sep}\)\?${element}\(${sep}.*\)\?$" +} + +is_in_space_sep_list () +{ + local element + element=${1} + shift + is_in_list_separator_helper "[[:space:]]" "${element}" "${*}" +} + +is_in_comma_sep_list () +{ + local element + element=${1} + shift + is_in_list_separator_helper "," "${element}" "${*}" +} + +sys2dev () +{ + sysdev=${1#/sys} + echo "/dev/$(udevadm info -q name -p ${sysdev} 2>/dev/null|| echo ${sysdev##*/})" +} + +subdevices () +{ + sysblock=${1} + r="" + + for dev in "${sysblock}"/* "${sysblock}" + do + if [ -e "${dev}/dev" ] + then + r="${r} ${dev}" + fi + done + + echo ${r} +} + +storage_devices() +{ + black_listed_devices="${1}" + white_listed_devices="${2}" + + for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "loop|ram|fd") + do + fulldevname=$(sys2dev "${sysblock}") + + if is_in_space_sep_list ${fulldevname} ${black_listed_devices} || \ + [ -n "${white_listed_devices}" ] && \ + ! is_in_space_sep_list ${fulldevname} ${white_listed_devices} + then + # skip this device entirely + continue + fi + + for dev in $(subdevices "${sysblock}") + do + devname=$(sys2dev "${dev}") + + if is_in_space_sep_list ${devname} ${black_listed_devices} + then + # skip this subdevice + continue + else + echo "${devname}" + fi + done + done +} + +is_supported_fs () +{ + fstype="${1}" + + # Validate input first + if [ -z "${fstype}" ] + then + return 1 + fi + + # get_fstype might report "unknown" or "swap", ignore it as no such kernel module exists + if [ "${fstype}" = "unknown" ] || [ "${fstype}" = "swap" ] + then + return 1 + fi + + # Try to look if it is already supported by the kernel + if grep -q ${fstype} /proc/filesystems + then + return 0 + else + # Then try to add support for it the gentle way using the initramfs capabilities + modprobe -q -b ${fstype} + if grep -q ${fstype} /proc/filesystems + then + return 0 + # Then try the hard way if /root is already reachable + else + kmodule="/root/lib/modules/`uname -r`/${fstype}/${fstype}.ko" + if [ -e "${kmodule}" ] + then + insmod "${kmodule}" + if grep -q ${fstype} /proc/filesystems + then + return 0 + fi + fi + fi + fi + + return 1 +} + +get_fstype () +{ + blkid -s TYPE -o value $1 2>/dev/null +} + +where_is_mounted () +{ + device=${1} + # return first found + grep -m1 "^${device} " /proc/mounts | cut -f2 -d ' ' +} + +trim_path () +{ + # remove all unnecessary /:s in the path, including last one (except + # if path is just "/") + echo ${1} | sed 's|//\+|/|g' | sed 's|^\(.*[^/]\)/$|\1|' +} + +what_is_mounted_on () +{ + local dir + dir="$(trim_path ${1})" + grep -m1 "^[^ ]\+ ${dir} " /proc/mounts | cut -d' ' -f1 +} + +chown_ref () +{ + local reference targets owner + reference="${1}" + shift + targets=${@} + owner=$(stat -c %u:%g "${reference}") + chown -h ${owner} ${targets} +} + +chmod_ref () +{ + local reference targets rights + reference="${1}" + shift + targets=${@} + rights=$(stat -c %a "${reference}") + chmod ${rights} ${targets} +} + +lastline () +{ + while read lines + do + line=${lines} + done + + echo "${line}" +} + +base_path () +{ + testpath="${1}" + mounts="$(awk '{print $2}' /proc/mounts)" + testpath="$(realpath ${testpath})" + + while true + do + if echo "${mounts}" | grep -qs "^${testpath}" + then + set -- $(echo "${mounts}" | grep "^${testpath}" | lastline) + echo ${1} + break + else + testpath=$(dirname $testpath) + fi + done +} + +fs_size () +{ + # Returns used/free fs kbytes + 5% more + # You could pass a block device as ${1} or the mount point as ${2} + + dev="${1}" + mountp="${2}" + used="${3}" + + if [ -z "${mountp}" ] + then + mountp="$(where_is_mounted ${dev})" + + if [ -z "${mountp}" ] + then + mountp="/mnt/tmp_fs_size" + + mkdir -p "${mountp}" + mount -t $(get_fstype "${dev}") -o ro "${dev}" "${mountp}" || log_warning_msg "cannot mount -t $(get_fstype ${dev}) -o ro ${dev} ${mountp}" + + doumount=1 + fi + fi + + if [ "${used}" = "used" ] + then + size=$(du -ks ${mountp} | cut -f1) + size=$(expr ${size} + ${size} / 20 ) # FIXME: 5% more to be sure + else + # free space + size="$(df -kP | grep -s ${mountp} | awk '{print $4}')" + fi + + if [ -n "${doumount}" ] + then + umount "${mountp}" || log_warning_msg "cannot umount ${mountp}" + rmdir "${mountp}" + fi + + echo "${size}" +} + +load_keymap () +{ + # Load custom keymap + if [ -x /bin/loadkeys -a -r /etc/boottime.kmap.gz ] + then + loadkeys --quiet /etc/boottime.kmap.gz + fi +} + +setup_loop () +{ + local fspath module pattern offset encryption readonly + fspath=${1} + module=${2} + pattern=${3} + offset=${4} + encryption=${5} + readonly=${6} + + # the output of setup_loop is evaluated in other functions, + # modprobe leaks kernel options like "libata.dma=0" + # as "options libata dma=0" on stdout, causing serious + # problems therefor, so instead always avoid output to stdout + modprobe -q -b "${module}" 1>/dev/null + + udevadm settle + + for loopdev in ${pattern} + do + if [ "$(cat ${loopdev}/size)" -eq 0 ] + then + dev=$(sys2dev "${loopdev}") + options='' + + if [ -n "${readonly}" ] + then + if losetup --help 2>&1 | grep -q -- "-r\b" + then + options="${options} -r" + fi + fi + + if [ -n "${offset}" ] && [ 0 -lt "${offset}" ] + then + options="${options} -o ${offset}" + fi + + if [ -z "${encryption}" ] + then + losetup ${options} "${dev}" "${fspath}" + else + # Loop AES encryption + while true + do + load_keymap + + echo -n "Enter passphrase for root filesystem: " >&6 + read -s passphrase + echo "${passphrase}" > /tmp/passphrase + unset passphrase + exec 9&6 + read answer + + if [ "$(echo "${answer}" | cut -b1 | tr A-Z a-z)" = "n" ] + then + unset answer + break + fi + done + fi + + echo "${dev}" + return 0 + fi + done + + panic "No loop devices available" +} + +try_mount () +{ + dev="${1}" + mountp="${2}" + opts="${3}" + fstype="${4}" + + old_mountp="$(where_is_mounted ${dev})" + + if [ -n "${old_mountp}" ] + then + if [ "${opts}" != "ro" ] + then + mount -o remount,"${opts}" "${dev}" "${old_mountp}" || panic "Remounting ${dev} ${opts} on ${old_mountp} failed" + fi + + mount -o bind "${old_mountp}" "${mountp}" || panic "Cannot bind-mount ${old_mountp} on ${mountp}" + else + if [ -z "${fstype}" ] + then + fstype=$(get_fstype "${dev}") + fi + mount -t "${fstype}" -o "${opts}" "${dev}" "${mountp}" || \ + ( echo "SKIPPING: Cannot mount ${dev} on ${mountp}, fstype=${fstype}, options=${opts}" > boot.log && return 0 ) + fi +} + +# Try to mount $device to the place expected by live-boot. If $device +# is already mounted somewhere, move it to the expected place. If $device +# ends with a "/" this is a directory path. +# If we're only probing $device (to check if it has custom persistence) +# $probe should be set, which suppresses warnings upon failure. On +# success, print the mount point for $device. +mount_persistence_media () +{ + local device probe backing old_backing fstype mount_opts + device=${1} + probe=${2} + + # get_custom_mounts() might call this with a directory path instead + # of a block device path. This means we have found sub-directory path + # underneath /run/live/persistence, so we're done + if [ -d "${device}" ] + then + echo "${device}" + return 0 + fi + + if [ ! -b "${device}" ] + then + return 1 + fi + + backing="/run/live/persistence/$(basename ${device})" + + mkdir -p "${backing}" + old_backing="$(where_is_mounted ${device})" + if [ -z "${old_backing}" ] + then + fstype="$(get_fstype ${device})" + mount_opts="rw,noatime" + if [ -n "${PERSISTENCE_READONLY}" ] + then + mount_opts="ro,noatime" + fi + if mount -t "${fstype}" -o "${mount_opts}" "${device}" "${backing}" >/dev/null + then + echo ${backing} + return 0 + else + [ -z "${probe}" ] && log_warning_msg "Failed to mount persistence media ${device}" + rmdir "${backing}" + return 1 + fi + elif [ "${backing}" != "${old_backing}" ] + then + if ! mount -o move ${old_backing} ${backing} >/dev/null + then + [ -z "${probe}" ] && log_warning_msg "Failed to move persistence media ${device}" + rmdir "${backing}" + return 1 + fi + mount_opts="rw,noatime" + if [ -n "${PERSISTENCE_READONLY}" ] + then + mount_opts="ro,noatime" + fi + if ! mount -o "remount,${mount_opts}" "${backing}" >/dev/null + then + log_warning_msg "Failed to remount persistence media ${device} writable" + # Don't unmount or rmdir the new mountpoint in this case + fi + echo ${backing} + return 0 + else + # This means that $device has already been mounted on + # the place expected by live-boot, so we're done. + echo ${backing} + return 0 + fi +} + +close_persistence_media () +{ + local device backing + device=${1} + backing="$(where_is_mounted ${device})" + + if [ -d "${backing}" ] + then + umount "${backing}" >/dev/null 2>&1 + rmdir "${backing}" >/dev/null 2>&1 + fi + + if is_active_luks_mapping ${device} + then + cryptsetup luksClose ${device} + fi +} + +open_luks_device () +{ + dev="${1}" + name="$(basename ${dev})" + opts="--key-file=-" + if [ -n "${PERSISTENCE_READONLY}" ] + then + opts="${opts} --readonly" + fi + + if cryptsetup status "${name}" >/dev/null 2>&1 + then + re="^[[:space:]]*device:[[:space:]]*\([^[:space:]]*\)$" + opened_dev=$(cryptsetup status ${name} 2>/dev/null | grep "${re}" | sed "s|${re}|\1|") + if [ "${opened_dev}" = "${dev}" ] + then + luks_device="/dev/mapper/${name}" + echo ${luks_device} + return 0 + else + log_warning_msg "Cannot open luks device ${dev} since ${opened_dev} already is opened with its name" + return 1 + fi + fi + + load_keymap + + # check for plymouth + [ -x /bin/plymouth ] && plymouth --ping && plymouth="y" + + # export udisk properties (used to get a nice device label) + unset ID_VENDOR_ENC ID_MODEL_ENC ID_PART_ENTRY_NUMBER + eval $(udevadm info --name=${dev} --query=property -x) + [ -z "${ID_VENDOR_ENC}" -a -z "${ID_MODEL_ENC}" ] && ID_MODEL_ENC="Unidentified device" + label="$(echo -e "${ID_VENDOR_ENC}${ID_MODEL_ENC}, Partition ${ID_PART_ENTRY_NUMBER} (${dev})")" + + if [ "${plymouth}" = "y" ] + then + cryptkeyscript="plymouth ask-for-password --prompt" + # Plymouth will add a : if it is a non-graphical prompt + cryptkeyprompt="Please unlock disk '${label}'" + else + cryptkeyscript="/lib/cryptsetup/askpass" + cryptkeyprompt="Please unlock disk '${label}': " + fi + + while true + do + $cryptkeyscript "$cryptkeyprompt" | \ + /sbin/cryptsetup -T 1 luksOpen ${dev} ${name} ${opts} + + if [ 0 -eq ${?} ] + then + luks_device="/dev/mapper/${name}" + echo ${luks_device} + return 0 + fi + + echo >&6 + retryprompt="There was an error decrypting '${label}' ... Retry? [Y/n]" + + if [ "${plymouth}" == "y" ] + then + plymouth display-message --text "${retryprompt}" + plymouth pause-progress + answer=$(plymouth watch-keystroke --keys="YNyn") + plymouth unpause-progress + else + echo -n "${retryprompt} " >&6 + read answer + fi + + if [ "$(echo "${answer}" | cut -b1 | tr A-Z a-z)" = "n" ] + then + [ "${plymouth}" = "y" ] && plymouth display-message --text "" + return 2 + fi + done +} + +get_gpt_name () +{ + local dev + dev="${1}" + blkid -s PART_ENTRY_NAME -p -o value ${dev} 2>/dev/null +} + +is_gpt_device () +{ + local dev + dev="${1}" + [ "$(blkid -s PART_ENTRY_SCHEME -p -o value ${dev} 2>/dev/null)" = "gpt" ] +} + +probe_for_gpt_name () +{ + local overlays dev gpt_dev gpt_name + overlays="${1}" + dev="${2}" + + gpt_dev="${dev}" + if is_active_luks_mapping ${dev} + then + # if $dev is an opened luks device, we need to check + # GPT stuff on the backing device + gpt_dev=$(get_luks_backing_device "${dev}") + fi + + if ! is_gpt_device ${gpt_dev} + then + return + fi + + gpt_name=$(get_gpt_name ${gpt_dev}) + for label in ${overlays} + do + if [ "${gpt_name}" = "${label}" ] + then + echo "${label}=${dev}" + fi + done +} + +probe_for_fs_label () +{ + local overlays dev + overlays="${1}" + dev="${2}" + + for label in ${overlays} + do + if [ "$(blkid -s LABEL -o value $dev 2>/dev/null)" = "${label}" ] + then + echo "${label}=${dev}" + fi + done +} + +probe_for_file_name () +{ + local overlays dev ret backing + overlays="${1}" + dev="${2}" + + ret="" + backing="$(mount_persistence_media ${dev} probe)" + if [ -z "${backing}" ] + then + return + fi + + for label in ${overlays} + do + path=${backing}/${PERSISTENCE_PATH}/${label} + if [ -f "${path}" ] + then + local loopdev + loopdev=$(setup_loop "${path}" "loop" "/sys/block/loop*") + ret="${ret} ${label}=${loopdev}" + fi + done + + if [ -n "${ret}" ] + then + echo ${ret} + else + # unmount and remove mountpoint + umount ${backing} > /dev/null 2>&1 || true + rmdir ${backing} > /dev/null 2>&1 || true + fi +} + +probe_for_directory_name () +{ + local overlays dev ret backing + overlays="${1}" + dev="${2}" + + ret="" + backing="$(mount_persistence_media ${dev} probe)" + if [ -z "${backing}" ] + then + return + fi + + for label in ${overlays} + do + path=${backing}/${PERSISTENCE_PATH}/${label} + if [ -d "${path}" ] + then + # in this case the "device" ends with a "/" + ret="${ret} ${label}=${backing}/${PERSISTENCE_PATH}/${label%%/}/" + fi + done + + if [ -n "${ret}" ] + then + echo ${ret} + else + # unmount and remove mountpoint + umount ${backing} > /dev/null 2>&1 || true + rmdir ${backing} > /dev/null 2>&1 || true + fi +} + +find_persistence_media () +{ + # Scans devices for overlays, and returns a whitespace + # separated list of how to use them. Only overlays with a partition + # label or file name in ${overlays} are returned. + # + # When scanning a LUKS device, the user will be asked to enter the + # passphrase; on failure to enter it, or if no persistence partitions + # or files were found, the LUKS device is closed. + # + # For all other cases (overlay partition and overlay file) the + # return value is "${label}=${device}", where ${device} a device that + # can mount the content. In the case of an overlay file, the device + # containing the file will remain mounted as a side-effect. + # + # No devices in ${black_listed_devices} will be scanned, and if + # ${white_list_devices} is non-empty, only devices in it will be + # scanned. + + local overlays white_listed_devices ret black_listed_devices + overlays="${1}" + white_listed_devices="${2}" + ret="" + + # + # The devices that are hosting the actual live rootfs should not be + # used for persistence storage since otherwise you might mount a + # parent directory on top of a sub-directory of the same filesystem + # in one union together. + # + black_listed_devices="" + for d in /run/live/rootfs/* /run/live/findiso /run/live/fromiso + do + black_listed_devices="${black_listed_devices} $(what_is_mounted_on d)" + done + + for dev in $(storage_devices "${black_listed_devices}" "${white_listed_devices}") + do + local result luks_device + result="" + + luks_device="" + # Check if it's a luks device; we'll have to open the device + # in order to probe any filesystem it contains, like we do + # below. activate_custom_mounts() also depends on that any luks + # device already has been opened. + if is_in_comma_sep_list luks ${PERSISTENCE_ENCRYPTION} && is_luks_partition ${dev} + then + if luks_device=$(open_luks_device "${dev}") + then + dev="${luks_device}" + else + # skip $dev since we failed/chose not to open it + continue + fi + elif ! is_in_comma_sep_list none ${PERSISTENCE_ENCRYPTION} + then + # skip $dev since we don't allow unencrypted storage + continue + fi + + # Probe for matching GPT partition names or filesystem labels + if is_in_comma_sep_list filesystem ${PERSISTENCE_STORAGE} + then + result=$(probe_for_gpt_name "${overlays}" ${dev}) + if [ -n "${result}" ] + then + ret="${ret} ${result}" + continue + fi + + result=$(probe_for_fs_label "${overlays}" ${dev}) + if [ -n "${result}" ] + then + ret="${ret} ${result}" + continue + fi + fi + + # Probe for files with matching name on mounted partition + if is_in_comma_sep_list file ${PERSISTENCE_STORAGE} + then + result=$(probe_for_file_name "${overlays}" ${dev}) + if [ -n "${result}" ] + then + local loopdevice + loopdevice=${result##*=} + if is_in_comma_sep_list luks ${PERSISTENCE_ENCRYPTION} && is_luks_partition ${loopdevice} + then + local luksfile + luksfile="" + if luksfile=$(open_luks_device "${loopdevice}") + then + result=${result%%=*} + result="${result}=${luksfile}" + else + losetup -d $loopdevice + result="" + fi + fi + ret="${ret} ${result}" + continue + fi + fi + + # Probe for directory with matching name on mounted partition + if is_in_comma_sep_list directory ${PERSISTENCE_STORAGE} + then + result=$(probe_for_directory_name "${overlays}" ${dev}) + if [ -n "${result}" ] + then + ret="${ret} ${result}" + continue + fi + fi + + # Close luks device if it isn't used + if [ -z "${result}" ] && [ -n "${luks_device}" ] && is_active_luks_mapping "${luks_device}" + then + cryptsetup luksClose "${luks_device}" + fi + done + + if [ -n "${ret}" ] + then + echo ${ret} + fi +} + +get_mac () +{ + mac="" + + for adaptor in /sys/class/net/* + do + status="$(cat ${adaptor}/iflink)" + + if [ "${status}" -eq 2 ] + then + mac="$(cat ${adaptor}/address)" + mac="$(echo ${mac} | sed 's/:/-/g' | tr '[a-z]' '[A-Z]')" + fi + done + + echo ${mac} +} + +is_luks_partition () +{ + device="${1}" + cryptsetup isLuks "${device}" 1>/dev/null 2>&1 +} + +is_active_luks_mapping () +{ + device="${1}" + cryptsetup status "${device}" 1>/dev/null 2>&1 +} + +get_luks_backing_device () +{ + device=${1} + cryptsetup status ${device} 2> /dev/null | \ + awk '{if ($1 == "device:") print $2}' +} + +removable_dev () +{ + output_format="${1}" + device_class="${2}" + ret= + + for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|dm-|fd)") + do + if [ ! -d "${sysblock}" ]; then + continue + fi + + dev_ok= + if [ "${device_class}" = "usb" ] && readlink ${sysblock} | grep -Eq "/usb[0-9]+/" + then + # We only want USB and this is an USB device + dev_ok="true" + elif [ "${device_class}" = "cdrom" ] && echo ${sysblock} | grep -Eq "/sr[0-9]+$" + then + # We only want CD-ROM devices and this is such a device + dev_ok="true" + elif [ -z "${device_class}" ] + then + if readlink ${sysblock} | grep -Eq "/(usb[0-9]+|fw[0-9]+|mmc[0-9]+)/" || [ "$(cat ${sysblock}/removable)" = "1" ] + then + # Assume all USB, Firewire and SD cards are external, + # This is the best possible guess, eg. udisks has the same logic + # There is NO property which indicates with certainity if a device is + # removable or not. + # Devices that contain a removable medium are considered removable + # too. Many (older) USB sticks also set this property although it's + # technically wrong. The flash chips are NOT removable from the device. + dev_ok="true" + fi + fi + + if [ "${dev_ok}" = "true" ] + then + case "${output_format}" in + sys) + ret="${ret} ${sysblock}" + ;; + *) + devname=$(sys2dev "${sysblock}") + ret="${ret} ${devname}" + ;; + esac + fi + done + + echo "${ret}" +} + +removable_usb_dev () +{ + output_format="${1}" + + removable_dev "${output_format}" "usb" +} + +removable_cdrom_dev () +{ + output_format="${1}" + + removable_dev "${output_format}" "cdrom" +} + +non_removable_dev () +{ + output_format="${1}" + ret= + + for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|dm-|fd)") + do + if [ ! -d "${sysblock}" ]; then + continue + fi + + if [ "$(cat ${sysblock}/removable)" = "0" ] + then + case "${output_format}" in + sys) + ret="${ret} ${sysblock}" + ;; + *) + devname=$(sys2dev "${sysblock}") + ret="${ret} ${devname}" + ;; + esac + fi + done + + echo "${ret}" +} + +link_files () +{ + # create source's directory structure in dest, and recursively + # create symlinks in dest to to all files in source. if mask + # is non-empty, remove mask from all source paths when + # creating links (will be necessary if we change root, which + # live-boot normally does (into $rootmnt)). + local src_dir dest_dir src_transform + + # remove multiple /:s and ensure ending on / + src_dir="$(trim_path ${1})/" + dest_dir="$(trim_path ${2})/" + src_transform="${3}" + + # This check can only trigger on the inital, non-recursive call since + # we create the destination before recursive calls + if [ ! -d "${dest_dir}" ] + then + log_warning_msg "Must link_files into a directory" + return + fi + + find "${src_dir}" -mindepth 1 -maxdepth 1 | \ + while read src + do + local dest final_src + dest="${dest_dir}$(basename "${src}")" + if [ -d "${src}" ] + then + if [ -z "$(ls -A "${src}")" ] + then + continue + fi + if [ ! -d "${dest}" ] + then + mkdir -p "${dest}" + chown_ref "${src}" "${dest}" + chmod_ref "${src}" "${dest}" + fi + link_files "${src}" "${dest}" "${src_transform}" + else + final_src=${src} + if [ -n "${src_transform}" ] + then + final_src="$(echo ${final_src} | sed "${src_transform}")" + fi + rm -rf "${dest}" 2> /dev/null + ln -s "${final_src}" "${dest}" + chown_ref "${src}" "${dest}" + fi + done +} + +do_union () +{ + local unionmountpoint unionrw unionro + unionmountpoint="${1}" # directory where the union is mounted + shift + unionrw="${1}" # branch where the union changes are stored + shift + unionro="${*}" # space separated list of read-only branches (optional) + + case "${UNIONTYPE}" in + aufs) + rw_opt="rw" + ro_opt="rr+wh" + noxino_opt="noxino" + + unionmountopts="-o noatime,${noxino_opt},dirs=${unionrw}=${rw_opt}" + if [ -n "${unionro}" ] + then + for rofs in ${unionro} + do + unionmountopts="${unionmountopts}:${rofs}=${ro_opt}" + done + fi + ;; + + overlay) + # XXX: can unionro be optional? i.e. can overlay skip lowerdir? + if [ -z "${unionro}" ] + then + panic "overlay needs at least one lower filesystem (read-only branch)." + fi + # Multiple lower layers can now be given using the the colon (":") as a + # separator character between the directory names. + unionro="$(echo ${unionro} | sed -e 's| |:|g')" + # overlayfs requires: + # + a workdir to become mounted + # + workdir and upperdir to reside under the same mount + # + workdir and upperdir to be in separate directories + mkdir "${unionrw}/rw" + mkdir "${unionrw}/work" + unionmountopts="-o noatime,lowerdir=${unionro},upperdir=${unionrw}/rw,workdir=${unionrw}/work" + ;; + esac + + mount -t ${UNIONTYPE} ${unionmountopts} ${UNIONTYPE} "${unionmountpoint}" +} + +get_custom_mounts () +{ + # Side-effect: leaves $devices with persistence.conf mounted in /run/live/persistence + # Side-effect: prints info to file $custom_mounts + + local custom_mounts devices bindings links + custom_mounts=${1} + shift + devices=${@} + + bindings="/tmp/bindings.list" + links="/tmp/links.list" + rm -rf ${bindings} ${links} 2> /dev/null + + for device in ${devices} + do + local device_name backing include_list + device_name="$(basename ${device})" + backing=$(mount_persistence_media ${device}) + if [ -z "${backing}" ] + then + continue + fi + + if [ -r "${backing}/${persistence_list}" ] + then + include_list="${backing}/${persistence_list}" + else + continue + fi + + if [ -n "${LIVE_BOOT_DEBUG}" ] && [ -e "${include_list}" ] + then + cp ${include_list} /run/live/persistence/${persistence_list}.${device_name} + fi + + while read dir options # < ${include_list} + do + if echo ${dir} | grep -qe "^[[:space:]]*\(#.*\)\?$" + then + # skipping empty or commented lines + continue + fi + + if trim_path ${dir} | grep -q -e "^[^/]" -e "^/lib" -e "^/run/live\(/.*\)\?$" -e "^/\(.*/\)\?\.\.\?\(/.*\)\?$" + then + log_warning_msg "Skipping unsafe custom mount ${dir}: must be an absolute path containing neither the \".\" nor \"..\" special dirs, and cannot be \"/lib\", or \"/run/live\" or any of its sub-directories." + continue + fi + + local opt_source opt_link source full_source full_dest + opt_source="" + opt_link="" + for opt in $(echo ${options} | tr ',' ' '); + do + case "${opt}" in + source=*) + opt_source=${opt#source=} + ;; + link) + opt_link="true" + ;; + union|bind) + ;; + *) + log_warning_msg "Skipping custom mount with unknown option: ${opt}" + continue 2 + ;; + esac + done + + source="${dir}" + if [ -n "${opt_source}" ] + then + if echo ${opt_source} | grep -q -e "^/" -e "^\(.*/\)\?\.\.\?\(/.*\)\?$" && [ "${opt_source}" != "." ] + then + log_warning_msg "Skipping unsafe custom mount with option source=${opt_source}: must be either \".\" (the media root) or a relative path w.r.t. the media root that contains neither comas, nor the special \".\" and \"..\" path components" + continue + else + source="${opt_source}" + fi + fi + + full_source="$(trim_path ${backing}/${source})" + full_dest="$(trim_path ${rootmnt}/${dir})" + if [ -n "${opt_link}" ] + then + echo "${device} ${full_source} ${full_dest} ${options}" >> ${links} + else + echo "${device} ${full_source} ${full_dest} ${options}" >> ${bindings} + fi + done < ${include_list} + done + + # We sort the list according to destination so we're sure that + # we won't hide a previous mount. We also ignore duplicate + # destinations in a more or less arbitrary way. + [ -e "${bindings}" ] && sort -k3 -sbu ${bindings} >> ${custom_mounts} && rm ${bindings} + + # After all mounts are considered we add symlinks so they + # won't be hidden by some mount. + [ -e "${links}" ] && cat ${links} >> ${custom_mounts} && rm ${links} + + # We need to make sure that no two custom mounts have the same sources + # or are nested; if that is the case, too much weird stuff can happen. + local prev_source prev_dest + prev_source="impossible source" # first iteration must not match + prev_dest="" + # This sort will ensure that a source /a comes right before a source + # /a/b so we only need to look at the previous source + [ -e ${custom_mounts} ] && sort -k2 -b ${custom_mounts} | + while read device source dest options + do + if echo ${source} | grep -qe "^${prev_source}\(/.*\)\?$" + then + panic "Two persistence mounts have the same or nested sources: ${source} on ${dest}, and ${prev_source} on ${prev_dest}" + fi + prev_source=${source} + prev_dest=${dest} + done +} + +activate_custom_mounts () +{ + local custom_mounts used_devices + custom_mounts="${1}" # the ouput from get_custom_mounts() + used_devices="" + + while read device source dest options # < ${custom_mounts} + do + local opt_bind opt_link opt_union + opt_bind="true" + opt_link="" + opt_union="" + for opt in $(echo ${options} | tr ',' ' '); + do + case "${opt}" in + bind) + opt_bind="true" + unset opt_link opt_union + ;; + link) + opt_link="true" + unset opt_bind opt_union + ;; + union) + opt_union="true" + unset opt_bind opt_link + ;; + esac + done + + if [ -n "$(what_is_mounted_on "${dest}")" ] + then + if [ "${dest}" = "${rootmnt}" ] + then + umount "${dest}" + else + log_warning_msg "Skipping custom mount ${dest}: $(what_is_mounted_on "${dest}") is already mounted there" + continue + fi + fi + + if [ ! -d "${dest}" ] + then + # create the destination and delete existing files in + # its path that are in the way + path="/" + for dir in $(echo ${dest} | sed -e 's|/\+| |g') + do + path=$(trim_path ${path}/${dir}) + if [ -f ${path} ] + then + rm -f ${path} + fi + if [ ! -e ${path} ] + then + mkdir -p ${path} + if echo ${path} | grep -qe "^${rootmnt}/*home/[^/]\+" + then + # if ${dest} is in /home try fixing proper ownership by assuming that the intended user is the first, which is usually the case + # FIXME: this should really be handled by live-config since we don't know for sure which uid a certain user has until then + chown 1000:1000 ${path} + fi + fi + done + fi + + # if ${source} doesn't exist on our persistence media + # we bootstrap it with $dest from the live filesystem. + # this both makes sense and is critical if we're + # dealing with /etc or other system dir. + if [ ! -d "${source}" ] + then + if [ -n "${PERSISTENCE_READONLY}" ] + then + continue + elif [ -n "${opt_union}" ] || [ -n "${opt_link}" ] + then + # unions and don't need to be bootstrapped + # link dirs can't be bootstrapped in a sensible way + mkdir -p "${source}" + chown_ref "${dest}" "${source}" + chmod_ref "${dest}" "${source}" + elif [ -n "${opt_bind}" ] + then + # ensure that $dest is not copied *into* $source + mkdir -p "$(dirname ${source})" + cp -a "${dest}" "${source}" + fi + fi + + # XXX: If CONFIG_AUFS_ROBR is added to the Debian kernel we can + # ignore the loop below and set rootfs_dest_backing=$dest + local rootfs_dest_backing + rootfs_dest_backing="" + if [ -n "${opt_link}" ] || [ -n "${opt_union}" ] + then + for d in /run/live/rootfs/* + do + if [ -n "${rootmnt}" ] + then + fs="${d}/$(echo ${dest} | sed -e "s|${rootmnt}||")" + else + fs="${d}/${dest}" + fi + if [ -d "${fs}" ] + then + rootfs_dest_backing="${rootfs_dest_backing} ${fs}" + fi + done + fi + + local cow_dir links_source + if [ -n "${opt_link}" ] && [ -z "${PERSISTENCE_READONLY}" ] + then + link_files ${source} ${dest} "" + elif [ -n "${opt_link}" ] && [ -n "${PERSISTENCE_READONLY}" ] + then + mkdir -p /run/live/persistence + links_source=$(mktemp -d /run/live/persistence/links-source-XXXXXX) + chown_ref ${source} ${links_source} + chmod_ref ${source} ${links_source} + # We put the cow dir in the below strange place to + # make it absolutely certain that the link source + # has its own directory and isn't nested with some + # other custom mount (if so that mount's files would + # be linked, causing breakage. + cow_dir="/run/live/overlay/run/live/persistence/$(basename ${links_source})" + mkdir -p ${cow_dir} + chown_ref "${source}" "${cow_dir}" + chmod_ref "${source}" "${cow_dir}" + do_union ${links_source} ${cow_dir} ${source} ${rootfs_dest_backing} + link_files ${links_source} ${dest} "s|^${rootmnt}||" + elif [ -n "${opt_union}" ] && [ -z "${PERSISTENCE_READONLY}" ] + then + do_union ${dest} ${source} ${rootfs_dest_backing} + elif [ -n "${opt_bind}" ] && [ -z "${PERSISTENCE_READONLY}" ] + then + mount -o bind "${source}" "${dest}" + elif [ -n "${opt_bind}" -o -n "${opt_union}" ] && [ -n "${PERSISTENCE_READONLY}" ] + then + # bind-mount and union mount are handled the same + # in read-only mode, but note that rootfs_dest_backing + # is non-empty (and necessary) only for unions + cow_dir="/run/live/overlay/${dest}" + if [ -e "${cow_dir}" ] && [ -z "${opt_link}" ] + then + # If an earlier custom mount has files here + # it will "block" the current mount's files + # which is undesirable + rm -rf "${cow_dir}" + fi + mkdir -p ${cow_dir} + chown_ref "${source}" "${cow_dir}" + chmod_ref "${source}" "${cow_dir}" + if [ "${UNIONTYPE}" = "overlay" ] + then + # When we use overlay we add the "/rw" postfix to our source when using it + # as upper layer. Therefore we also have to add it here when using it as + # the lower layer. + source="${source}/rw" + fi + do_union ${dest} ${cow_dir} ${source} ${rootfs_dest_backing} + fi + + PERSISTENCE_IS_ON="1" + export PERSISTENCE_IS_ON + + if echo ${used_devices} | grep -qve "^\(.* \)\?${device}\( .*\)\?$" + then + used_devices="${used_devices} ${device}" + fi + done < ${custom_mounts} + + echo ${used_devices} +} + +is_mountpoint () +{ + directory="$1" + + [ $(stat -fc%d:%D "${directory}") != $(stat -fc%d:%D "${directory}/..") ] +} -- cgit v1.2.3