summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDaniel Baumann <mail@daniel-baumann.ch>2015-11-07 15:35:56 +0000
committerDaniel Baumann <mail@daniel-baumann.ch>2015-11-07 15:35:56 +0000
commit68e0e5c64ebe512f6b2e48893763ab38879ed84e (patch)
treeeaf9638c29d1039bf9adcda8f9aa669291e208f3
parentAdding debian version 1.1~pre1-1. (diff)
downloadplzip-68e0e5c64ebe512f6b2e48893763ab38879ed84e.tar.xz
plzip-68e0e5c64ebe512f6b2e48893763ab38879ed84e.zip
Merging upstream version 1.1.
Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>
Diffstat (limited to '')
-rw-r--r--ChangeLog4
-rw-r--r--Makefile.in3
-rw-r--r--arg_parser.cc4
-rwxr-xr-xconfigure2
-rw-r--r--doc/plzip.19
-rw-r--r--doc/plzip.info28
-rw-r--r--doc/plzip.texinfo27
-rw-r--r--lzip.h6
-rw-r--r--main.cc11
-rwxr-xr-xtestsuite/check.sh4
10 files changed, 52 insertions, 46 deletions
diff --git a/ChangeLog b/ChangeLog
index 2c477fa..34149ef 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,6 +1,6 @@
-2013-07-20 Antonio Diaz Diaz <antonio@gnu.org>
+2013-09-17 Antonio Diaz Diaz <antonio@gnu.org>
- * Version 1.1-pre1 released.
+ * Version 1.1 released.
* Show progress of compression at verbosity level 2 (-vv).
* SIGUSR1 and SIGUSR2 are no more used to signal a fatal error.
diff --git a/Makefile.in b/Makefile.in
index 4c78781..f072079 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -49,8 +49,7 @@ $(VPATH)/doc/$(pkgname).info : $(VPATH)/doc/$(pkgname).texinfo
man : $(VPATH)/doc/$(progname).1
$(VPATH)/doc/$(progname).1 : $(progname)
- help2man -n 'reduces the size of files' \
- -o $@ ./$(progname)
+ help2man -n 'reduces the size of files' -o $@ ./$(progname)
Makefile : $(VPATH)/configure $(VPATH)/Makefile.in
./config.status
diff --git a/arg_parser.cc b/arg_parser.cc
index a28d2ba..5cb98a9 100644
--- a/arg_parser.cc
+++ b/arg_parser.cc
@@ -156,12 +156,12 @@ Arg_parser::Arg_parser( const int argc, const char * const argv[],
while( argind < argc )
{
const unsigned char ch1 = argv[argind][0];
- const unsigned char ch2 = ( ch1 ? argv[argind][1] : 0 );
+ const unsigned char ch2 = ch1 ? argv[argind][1] : 0;
if( ch1 == '-' && ch2 ) // we found an option
{
const char * const opt = argv[argind];
- const char * const arg = (argind + 1 < argc) ? argv[argind+1] : 0;
+ const char * const arg = ( argind + 1 < argc ) ? argv[argind+1] : 0;
if( ch2 == '-' )
{
if( !argv[argind][2] ) { ++argind; break; } // we found "--"
diff --git a/configure b/configure
index e90d90c..cb38aa1 100755
--- a/configure
+++ b/configure
@@ -6,7 +6,7 @@
# to copy, distribute and modify it.
pkgname=plzip
-pkgversion=1.1-pre1
+pkgversion=1.1
progname=plzip
srctrigger=doc/${pkgname}.texinfo
diff --git a/doc/plzip.1 b/doc/plzip.1
index 781baf9..291a67f 100644
--- a/doc/plzip.1
+++ b/doc/plzip.1
@@ -1,5 +1,5 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.37.1.
-.TH PLZIP "1" "July 2013" "Plzip 1.1-pre1" "User Commands"
+.TH PLZIP "1" "September 2013" "Plzip 1.1" "User Commands"
.SH NAME
Plzip \- reduces the size of files
.SH SYNOPSIS
@@ -46,7 +46,7 @@ if reading stdin, place the output into <file>
suppress all messages
.TP
\fB\-s\fR, \fB\-\-dictionary\-size=\fR<bytes>
-set dictionary size limit in bytes [8MiB]
+set dictionary size limit in bytes [8 MiB]
.TP
\fB\-t\fR, \fB\-\-test\fR
test compressed file integrity
@@ -70,7 +70,8 @@ Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...
The bidimensional parameter space of LZMA can't be mapped to a linear
scale optimal for all files. If your files are large, very repetitive,
etc, you may need to use the \fB\-\-match\-length\fR and \fB\-\-dictionary\-size\fR
-options directly to achieve optimal performance.
+options directly to achieve optimal performance. For example, \fB\-9m64\fR
+usually compresses executables more (and faster) than \fB\-9\fR.
.PP
Exit status: 0 for a normal exit, 1 for environmental problems (file
not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
@@ -84,7 +85,7 @@ Plzip home page: http://www.nongnu.org/lzip/plzip.html
Copyright \(co 2009 Laszlo Ersek.
.br
Copyright \(co 2013 Antonio Diaz Diaz.
-Using Lzlib 1.4
+Using Lzlib 1.5
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
.br
This is free software: you are free to change and redistribute it.
diff --git a/doc/plzip.info b/doc/plzip.info
index 72e9511..7461e06 100644
--- a/doc/plzip.info
+++ b/doc/plzip.info
@@ -12,7 +12,7 @@ File: plzip.info, Node: Top, Next: Introduction, Up: (dir)
Plzip Manual
************
-This manual is for Plzip (version 1.1-pre1, 20 July 2013).
+This manual is for Plzip (version 1.1, 17 September 2013).
* Menu:
@@ -149,8 +149,8 @@ The format for running plzip is:
`--data-size=BYTES'
Set the input data block size in bytes. The input file will be
divided in chunks of this size before compression is performed.
- Valid values range from 8KiB to 1GiB. Default value is two times
- the dictionary size. Plzip will reduce the dictionary size if it
+ Valid values range from 8 KiB to 1 GiB. Default value is two times
+ the dictionary size. Plzip will reduce the dictionary size if it
is larger than the chosen data size.
`-c'
@@ -204,8 +204,8 @@ The format for running plzip is:
`-s BYTES'
`--dictionary-size=BYTES'
- Set the dictionary size limit in bytes. Valid values range from
- 4KiB to 512MiB. Plzip will use the smallest possible dictionary
+ Set the dictionary size limit in bytes. Valid values range from 4
+ KiB to 512 MiB. Plzip will use the smallest possible dictionary
size for each member without exceeding this limit. Note that
dictionary sizes are quantized. If the specified size does not
match one of the valid sizes, it will be rounded upwards by adding
@@ -241,7 +241,8 @@ The format for running plzip is:
linear scale optimal for all files. If your files are large, very
repetitive, etc, you may need to use the `--match-length' and
`--dictionary-size' options directly to achieve optimal
- performance.
+ performance. For example, `-9m64' usually compresses executables
+ more (and faster) than `-9'.
Level Dictionary size Match length limit
-1 1 MiB 5 bytes
@@ -259,7 +260,6 @@ The format for running plzip is:
Aliases for GNU gzip compatibility.
-
Numbers given as arguments to options may be followed by a multiplier
and an optional `B' for "byte".
@@ -318,7 +318,7 @@ additional information before, between, or after them.
`ID string'
A four byte string, identifying the lzip format, with the value
- "LZIP".
+ "LZIP" (0x4C, 0x5A, 0x49, 0x50).
`VN (version number, 1 byte)'
Just in case something needs to be modified in the future. 1 for
@@ -333,8 +333,8 @@ additional information before, between, or after them.
Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).
Bits 7-5 contain the number of wedges (0 to 7) to substract from
the base size to obtain the dictionary size.
- Example: 0xD3 = (2^19 - 6 * 2^15) = (512KiB - 6 * 32KiB) = 320KiB
- Valid values for dictionary size range from 4KiB to 512MiB.
+ Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB
+ Valid values for dictionary size range from 4 KiB to 512 MiB.
`Lzma stream'
The lzma stream, finished by an end of stream marker. Uses default
@@ -357,7 +357,7 @@ additional information before, between, or after them.

File: plzip.info, Node: Problems, Next: Concept index, Prev: File format, Up: Top
-5 Reporting Bugs
+5 Reporting bugs
****************
There are probably bugs in plzip. There are certainly errors and
@@ -395,9 +395,9 @@ Node: Top223
Node: Introduction871
Node: Program design4426
Node: Invoking plzip5480
-Node: File format10776
-Node: Problems13255
-Node: Concept index13784
+Node: File format10864
+Node: Problems13369
+Node: Concept index13898

End Tag Table
diff --git a/doc/plzip.texinfo b/doc/plzip.texinfo
index c3b0613..0370677 100644
--- a/doc/plzip.texinfo
+++ b/doc/plzip.texinfo
@@ -6,8 +6,8 @@
@finalout
@c %**end of header
-@set UPDATED 20 July 2013
-@set VERSION 1.1-pre1
+@set UPDATED 17 September 2013
+@set VERSION 1.1
@dircategory Data Compression
@direntry
@@ -173,9 +173,9 @@ Print the version number of plzip on the standard output and exit.
@itemx --data-size=@var{bytes}
Set the input data block size in bytes. The input file will be divided
in chunks of this size before compression is performed. Valid values
-range from 8KiB to 1GiB. Default value is two times the dictionary size.
-Plzip will reduce the dictionary size if it is larger than the chosen
-data size.
+range from 8 KiB to 1 GiB. Default value is two times the dictionary
+size. Plzip will reduce the dictionary size if it is larger than the
+chosen data size.
@item -c
@itemx --stdout
@@ -225,8 +225,8 @@ Quiet operation. Suppress all messages.
@item -s @var{bytes}
@itemx --dictionary-size=@var{bytes}
-Set the dictionary size limit in bytes. Valid values range from 4KiB to
-512MiB. Plzip will use the smallest possible dictionary size for each
+Set the dictionary size limit in bytes. Valid values range from 4 KiB to
+512 MiB. Plzip will use the smallest possible dictionary size for each
member without exceeding this limit. Note that dictionary sizes are
quantized. If the specified size does not match one of the valid sizes,
it will be rounded upwards by adding up to (@var{bytes} / 16) to it.
@@ -259,7 +259,8 @@ The bidimensional parameter space of LZMA can't be mapped to a linear
scale optimal for all files. If your files are large, very repetitive,
etc, you may need to use the @samp{--match-length} and
@samp{--dictionary-size} options directly to achieve optimal
-performance.
+performance. For example, @samp{-9m64} usually compresses executables
+more (and faster) than @samp{-9}.
@multitable {Level} {Dictionary size} {Match length limit}
@item Level @tab Dictionary size @tab Match length limit
@@ -280,7 +281,6 @@ Aliases for GNU gzip compatibility.
@end table
-@sp 1
Numbers given as arguments to options may be followed by a multiplier
and an optional @samp{B} for "byte".
@@ -346,7 +346,8 @@ All multibyte values are stored in little endian order.
@table @samp
@item ID string
-A four byte string, identifying the lzip format, with the value "LZIP".
+A four byte string, identifying the lzip format, with the value "LZIP"
+(0x4C, 0x5A, 0x49, 0x50).
@item VN (version number, 1 byte)
Just in case something needs to be modified in the future. 1 for now.
@@ -359,8 +360,8 @@ wedges between 0 and 7. The size of a wedge is (base_size / 16).@*
Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).@*
Bits 7-5 contain the number of wedges (0 to 7) to substract from the
base size to obtain the dictionary size.@*
-Example: 0xD3 = (2^19 - 6 * 2^15) = (512KiB - 6 * 32KiB) = 320KiB@*
-Valid values for dictionary size range from 4KiB to 512MiB.
+Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB@*
+Valid values for dictionary size range from 4 KiB to 512 MiB.
@item Lzma stream
The lzma stream, finished by an end of stream marker. Uses default values
@@ -381,7 +382,7 @@ facilitates safe recovery of undamaged members from multi-member files.
@node Problems
-@chapter Reporting Bugs
+@chapter Reporting bugs
@cindex bugs
@cindex getting help
diff --git a/lzip.h b/lzip.h
index 9dd8989..dfb28ee 100644
--- a/lzip.h
+++ b/lzip.h
@@ -89,15 +89,15 @@ struct File_header
return sz;
}
- bool dictionary_size( const int sz )
+ bool dictionary_size( const unsigned sz )
{
if( sz >= min_dictionary_size && sz <= max_dictionary_size )
{
data[5] = real_bits( sz - 1 );
if( sz > min_dictionary_size )
{
- const int base_size = 1 << data[5];
- const int wedge = base_size / 16;
+ const unsigned base_size = 1 << data[5];
+ const unsigned wedge = base_size / 16;
for( int i = 7; i >= 1; --i )
if( base_size - ( i * wedge ) >= sz )
{ data[5] |= ( i << 5 ); break; }
diff --git a/main.cc b/main.cc
index 3fdf9da..4998633 100644
--- a/main.cc
+++ b/main.cc
@@ -84,8 +84,8 @@ struct { const char * from; const char * to; } const known_extensions[] = {
struct Lzma_options
{
- int dictionary_size; // 4KiB..512MiB
- int match_len_limit; // 5..273
+ int dictionary_size; // 4 KiB .. 512 MiB
+ int match_len_limit; // 5 .. 273
};
enum Mode { m_compress, m_decompress, m_test };
@@ -115,7 +115,7 @@ void show_help( const long num_online )
" -n, --threads=<n> set number of (de)compression threads [%ld]\n"
" -o, --output=<file> if reading stdin, place the output into <file>\n"
" -q, --quiet suppress all messages\n"
- " -s, --dictionary-size=<bytes> set dictionary size limit in bytes [8MiB]\n"
+ " -s, --dictionary-size=<bytes> set dictionary size limit in bytes [8 MiB]\n"
" -t, --test test compressed file integrity\n"
" -v, --verbose be verbose (a 2nd -v gives more)\n"
" -1 .. -9 set compression level [default 6]\n"
@@ -132,7 +132,8 @@ void show_help( const long num_online )
"The bidimensional parameter space of LZMA can't be mapped to a linear\n"
"scale optimal for all files. If your files are large, very repetitive,\n"
"etc, you may need to use the --match-length and --dictionary-size\n"
- "options directly to achieve optimal performance.\n"
+ "options directly to achieve optimal performance. For example, -9m64\n"
+ "usually compresses executables more (and faster) than -9.\n"
"\nExit status: 0 for a normal exit, 1 for environmental problems (file\n"
"not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or\n"
"invalid input file, 3 for an internal consistency error (eg, bug) which\n"
@@ -260,7 +261,7 @@ int open_instream( const char * const name, struct stat * const in_statsp,
const bool can_read = ( i == 0 &&
( S_ISBLK( mode ) || S_ISCHR( mode ) ||
S_ISFIFO( mode ) || S_ISSOCK( mode ) ) );
- const bool no_ofile = to_stdout || ( program_mode == m_test );
+ const bool no_ofile = to_stdout || program_mode == m_test;
if( i != 0 || ( !S_ISREG( mode ) && ( !can_read || !no_ofile ) ) )
{
if( verbosity >= 0 )
diff --git a/testsuite/check.sh b/testsuite/check.sh
index 05ab346..500636c 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -43,6 +43,10 @@ if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
"${LZIP}" -cdq < in
if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
+dd if="${in_lz}" bs=1 count=6 2> /dev/null | "${LZIP}" -tq
+if [ $? = 2 ] ; then printf . ; else printf - ; fail=1 ; fi
+dd if="${in_lz}" bs=1 count=20 2> /dev/null | "${LZIP}" -tq
+if [ $? = 2 ] ; then printf . ; else printf - ; fail=1 ; fi
"${LZIP}" -t "${in_lz}" || fail=1
"${LZIP}" -cd "${in_lz}" > copy || fail=1