summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDaniel Baumann <mail@daniel-baumann.ch>2015-11-07 15:54:44 +0000
committerDaniel Baumann <mail@daniel-baumann.ch>2015-11-07 15:54:44 +0000
commitcf7b4bca3811d402cc01978658485297451a9784 (patch)
tree29e47e9255fb7903abdca4a444ca46851a8745ab
parentAdding debian version 1.4~rc1-1. (diff)
downloadplzip-cf7b4bca3811d402cc01978658485297451a9784.tar.xz
plzip-cf7b4bca3811d402cc01978658485297451a9784.zip
Merging upstream version 1.4.
Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>
Diffstat (limited to '')
-rw-r--r--ChangeLog11
-rw-r--r--INSTALL4
-rw-r--r--NEWS2
-rw-r--r--compress.cc13
-rwxr-xr-xconfigure2
-rw-r--r--dec_stdout.cc2
-rw-r--r--dec_stream.cc2
-rw-r--r--decompress.cc23
-rw-r--r--doc/plzip.16
-rw-r--r--doc/plzip.info112
-rw-r--r--doc/plzip.texi93
-rw-r--r--file_index.cc2
-rw-r--r--file_index.h2
-rw-r--r--lzip.h12
-rw-r--r--main.cc76
-rwxr-xr-xtestsuite/check.sh1
16 files changed, 182 insertions, 181 deletions
diff --git a/ChangeLog b/ChangeLog
index e819363..47c95c1 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,12 +1,7 @@
-2015-05-23 Antonio Diaz Diaz <antonio@gnu.org>
+2015-07-09 Antonio Diaz Diaz <antonio@gnu.org>
- * Version 1.4-rc1 released.
- * Show default '--data-size' in '--help' output.
-
-2015-02-25 Antonio Diaz Diaz <antonio@gnu.org>
-
- * Version 1.4-pre1 released.
- * Option '-0' now uses the fast encoder of lzlib 1.7-pre1.
+ * Version 1.4 released.
+ * Option '-0' now uses the fast encoder of lzlib 1.7.
2015-01-22 Antonio Diaz Diaz <antonio@gnu.org>
diff --git a/INSTALL b/INSTALL
index b65827e..5969bdc 100644
--- a/INSTALL
+++ b/INSTALL
@@ -3,8 +3,8 @@ Requirements
You will need a C++ compiler and the lzlib compression library installed.
I use gcc 4.9.1 and 4.1.2, but the code should compile with any
standards compliant compiler.
-Lzlib must be version 1.0 or newer.
-The fast encoder is only available in lzlib 1.7-pre1 or newer.
+Lzlib must be version 1.0 or newer, but the fast encoder is only
+available in lzlib 1.7 or newer.
Gcc is available at http://gcc.gnu.org.
Lzlib is available at http://www.nongnu.org/lzip/lzlib.html.
diff --git a/NEWS b/NEWS
index 315af9a..770d0a8 100644
--- a/NEWS
+++ b/NEWS
@@ -1,5 +1,5 @@
Changes in version 1.4:
The option "-0" has been modified to use the new fast encoder of lzlib
-1.7, achieving a compression speed and ratio comparable to those of
+1.7, which achieves a compression speed and ratio comparable to those of
pigz's default compression level.
diff --git a/compress.cc b/compress.cc
index 1f0ae5d..ecc7e5e 100644
--- a/compress.cc
+++ b/compress.cc
@@ -375,11 +375,10 @@ extern "C" void * cworker( void * arg )
Packet * const packet = courier.distribute_packet();
if( !packet ) break; // no more packets to process
- int dict_size;
- if( dictionary_size == 65535 && match_len_limit == 16 )
- dict_size = dictionary_size;
- else dict_size = std::max( LZ_min_dictionary_size(),
- std::min( dictionary_size, packet->size ) );
+ const bool fast = dictionary_size == 65535 && match_len_limit == 16;
+ const int dict_size = fast ? dictionary_size :
+ std::max( std::min( dictionary_size, packet->size ),
+ LZ_min_dictionary_size() );
LZ_Encoder * const encoder =
LZ_compress_open( dict_size, match_len_limit, LLONG_MAX );
if( !encoder || LZ_compress_errno( encoder ) != LZ_ok )
@@ -413,7 +412,7 @@ extern "C" void * cworker( void * arg )
{
pp();
if( verbosity >= 0 )
- std::fprintf( stderr, "LZ_compress_read error: %s.\n",
+ std::fprintf( stderr, "LZ_compress_read error: %s\n",
LZ_strerror( LZ_compress_errno( encoder ) ) );
cleanup_and_fail();
}
@@ -521,7 +520,7 @@ int compress( const int data_size, const int dictionary_size,
if( verbosity >= 1 )
{
if( in_size == 0 || out_size == 0 )
- std::fprintf( stderr, " no data compressed.\n" );
+ std::fputs( " no data compressed.\n", stderr );
else
std::fprintf( stderr, "%6.3f:1, %6.3f bits/byte, "
"%5.2f%% saved, %llu in, %llu out.\n",
diff --git a/configure b/configure
index 94f58c9..1c20dc4 100755
--- a/configure
+++ b/configure
@@ -6,7 +6,7 @@
# to copy, distribute and modify it.
pkgname=plzip
-pkgversion=1.4-rc1
+pkgversion=1.4
progname=plzip
srctrigger=doc/${pkgname}.texi
diff --git a/dec_stdout.cc b/dec_stdout.cc
index 7e5a6fd..798148e 100644
--- a/dec_stdout.cc
+++ b/dec_stdout.cc
@@ -309,7 +309,7 @@ int dec_stdout( const int num_workers, const int infd, const int outfd,
std::fprintf( stderr, "decompressed size %9llu, size %9llu. ",
out_size, in_size );
- if( verbosity >= 1 ) std::fprintf( stderr, "done\n" );
+ if( verbosity >= 1 ) std::fputs( "done\n", stderr );
if( debug_level & 1 )
std::fprintf( stderr,
diff --git a/dec_stream.cc b/dec_stream.cc
index a814194..93fc8de 100644
--- a/dec_stream.cc
+++ b/dec_stream.cc
@@ -520,7 +520,7 @@ int dec_stream( const int num_workers, const int infd, const int outfd,
std::fprintf( stderr, "decompressed size %9llu, size %9llu. ",
out_size, in_size );
- if( verbosity >= 1 ) std::fprintf( stderr, (outfd < 0) ? "ok\n" : "done\n" );
+ if( verbosity >= 1 ) std::fputs( (outfd < 0) ? "ok\n" : "done\n", stderr );
if( debug_level & 1 )
std::fprintf( stderr,
diff --git a/decompress.cc b/decompress.cc
index 0cc99f8..4c6b946 100644
--- a/decompress.cc
+++ b/decompress.cc
@@ -37,6 +37,23 @@
#include "file_index.h"
+void Pretty_print::operator()( const char * const msg ) const
+ {
+ if( verbosity >= 0 )
+ {
+ if( first_post )
+ {
+ first_post = false;
+ std::fprintf( stderr, " %s: ", name_.c_str() );
+ for( unsigned i = 0; i < longest_name - name_.size(); ++i )
+ std::fputc( ' ', stderr );
+ if( !msg ) std::fflush( stderr );
+ }
+ if( msg ) std::fprintf( stderr, "%s\n", msg );
+ }
+ }
+
+
// Returns the number of bytes really read.
// If (returned value < size) and (errno == 0), means EOF was reached.
//
@@ -82,7 +99,7 @@ int decompress_read_error( struct LZ_Decoder * const decoder,
const LZ_Errno errcode = LZ_decompress_errno( decoder );
pp();
if( verbosity >= 0 )
- std::fprintf( stderr, "LZ_decompress_read error in worker %d: %s.\n",
+ std::fprintf( stderr, "LZ_decompress_read error in worker %d: %s\n",
worker_id, LZ_strerror( errcode ) );
if( errcode == LZ_header_error || errcode == LZ_unexpected_eof ||
errcode == LZ_data_error )
@@ -160,7 +177,7 @@ extern "C" void * dworker( void * arg )
{
pp();
if( verbosity >= 0 )
- std::fprintf( stderr, "Write error in worker %d: %s.\n",
+ std::fprintf( stderr, "Write error in worker %d: %s\n",
worker_id, std::strerror( errno ) );
cleanup_and_fail();
}
@@ -260,7 +277,7 @@ int decompress( int num_workers, const int infd, const int outfd,
std::fprintf( stderr, "decompressed size %9llu, size %9llu. ",
out_size, in_size );
- if( verbosity >= 1 ) std::fprintf( stderr, (outfd < 0) ? "ok\n" : "done\n" );
+ if( verbosity >= 1 ) std::fputs( (outfd < 0) ? "ok\n" : "done\n", stderr );
return 0;
}
diff --git a/doc/plzip.1 b/doc/plzip.1
index 6ed21c1..01f4e36 100644
--- a/doc/plzip.1
+++ b/doc/plzip.1
@@ -1,5 +1,5 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.1.
-.TH PLZIP "1" "May 2015" "plzip 1.4-rc1" "User Commands"
+.TH PLZIP "1" "July 2015" "plzip 1.4" "User Commands"
.SH NAME
plzip \- reduces the size of files
.SH SYNOPSIS
@@ -28,7 +28,7 @@ decompress
overwrite existing output files
.TP
\fB\-F\fR, \fB\-\-recompress\fR
-force recompression of compressed files
+force re\-compression of compressed files
.TP
\fB\-k\fR, \fB\-\-keep\fR
keep (don't delete) input files
@@ -84,7 +84,7 @@ Plzip home page: http://www.nongnu.org/lzip/plzip.html
Copyright \(co 2009 Laszlo Ersek.
.br
Copyright \(co 2015 Antonio Diaz Diaz.
-Using Lzlib 1.7\-rc1
+Using lzlib 1.7
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
.br
This is free software: you are free to change and redistribute it.
diff --git a/doc/plzip.info b/doc/plzip.info
index d07ba9e..474db91 100644
--- a/doc/plzip.info
+++ b/doc/plzip.info
@@ -11,13 +11,13 @@ File: plzip.info, Node: Top, Next: Introduction, Up: (dir)
Plzip Manual
************
-This manual is for Plzip (version 1.4-rc1, 23 May 2015).
+This manual is for Plzip (version 1.4, 9 July 2015).
* Menu:
* Introduction:: Purpose and features of plzip
-* Program design:: Internal structure of plzip
* Invoking plzip:: Command line interface
+* Program design:: Internal structure of plzip
* File format:: Detailed format of the compressed file
* Memory requirements:: Memory required to compress and decompress
* Minimum file sizes:: Minimum file sizes required for full speed
@@ -31,7 +31,7 @@ This manual is for Plzip (version 1.4-rc1, 23 May 2015).
copy, distribute and modify it.

-File: plzip.info, Node: Introduction, Next: Program design, Prev: Top, Up: Top
+File: plzip.info, Node: Introduction, Next: Invoking plzip, Prev: Top, Up: Top
1 Introduction
**************
@@ -59,7 +59,8 @@ availability:
recovery means. The lziprecover program can repair bit-flip errors
(one of the most common forms of data corruption) in lzip files,
and provides data recovery capabilities, including error-checked
- merging of damaged copies of a file.
+ merging of damaged copies of a file. *note Data safety:
+ (lziprecover)Data safety.
* The lzip format is as simple as possible (but not simpler). The
lzip manual provides the code of a simple decompressor along with
@@ -122,43 +123,9 @@ until you verify the compressed file with a command like
'plzip -cd file.lz | cmp file -'.

-File: plzip.info, Node: Program design, Next: Invoking plzip, Prev: Introduction, Up: Top
-
-2 Program design
-****************
-
-When compressing, plzip divides the input file into chunks and
-compresses as many chunks simultaneously as worker threads are chosen,
-creating a multi-member compressed file.
-
- When decompressing, plzip decompresses as many members
-simultaneously as worker threads are chosen. Files that were compressed
-with lzip will not be decompressed faster than using lzip (unless the
-'-b' option was used) because lzip usually produces single-member
-files, which can't be decompressed in parallel.
-
- For each input file, a splitter thread and several worker threads are
-created, acting the main thread as muxer (multiplexer) thread. A "packet
-courier" takes care of data transfers among threads and limits the
-maximum number of data blocks (packets) being processed simultaneously.
-
- The splitter reads data blocks from the input file, and distributes
-them to the workers. The workers (de)compress the blocks received from
-the splitter. The muxer collects processed packets from the workers, and
-writes them to the output file.
-
- When decompressing from a regular file, the splitter is removed and
-the workers read directly from the input file. If the output file is
-also a regular file, the muxer is also removed and the workers write
-directly to the output file. With these optimizations, the use of RAM
-is greatly reduced and the decompression speed of large files with many
-members is only limited by the number of processors available and by
-I/O speed.
-
-
-File: plzip.info, Node: Invoking plzip, Next: File format, Prev: Program design, Up: Top
+File: plzip.info, Node: Invoking plzip, Next: Program design, Prev: Introduction, Up: Top
-3 Invoking plzip
+2 Invoking plzip
****************
The format for running plzip is:
@@ -199,7 +166,7 @@ The format for running plzip is:
'-F'
'--recompress'
- Force recompression of files whose name already has the '.lz' or
+ Force re-compression of files whose name already has the '.lz' or
'.tlz' suffix.
'-k'
@@ -318,7 +285,41 @@ invalid input file, 3 for an internal consistency error (eg, bug) which
caused plzip to panic.

-File: plzip.info, Node: File format, Next: Memory requirements, Prev: Invoking plzip, Up: Top
+File: plzip.info, Node: Program design, Next: File format, Prev: Invoking plzip, Up: Top
+
+3 Program design
+****************
+
+When compressing, plzip divides the input file into chunks and
+compresses as many chunks simultaneously as worker threads are chosen,
+creating a multi-member compressed file.
+
+ When decompressing, plzip decompresses as many members
+simultaneously as worker threads are chosen. Files that were compressed
+with lzip will not be decompressed faster than using lzip (unless the
+'-b' option was used) because lzip usually produces single-member
+files, which can't be decompressed in parallel.
+
+ For each input file, a splitter thread and several worker threads are
+created, acting the main thread as muxer (multiplexer) thread. A "packet
+courier" takes care of data transfers among threads and limits the
+maximum number of data blocks (packets) being processed simultaneously.
+
+ The splitter reads data blocks from the input file, and distributes
+them to the workers. The workers (de)compress the blocks received from
+the splitter. The muxer collects processed packets from the workers, and
+writes them to the output file.
+
+ When decompressing from a regular file, the splitter is removed and
+the workers read directly from the input file. If the output file is
+also a regular file, the muxer is also removed and the workers write
+directly to the output file. With these optimizations, the use of RAM
+is greatly reduced and the decompression speed of large files with many
+members is only limited by the number of processors available and by
+I/O speed.
+
+
+File: plzip.info, Node: File format, Next: Memory requirements, Prev: Program design, Up: Top
4 File format
*************
@@ -398,15 +399,16 @@ The amount of memory required *per thread* is approximately the
following:
* For compression at level -0; 1.5 MiB plus 3 times the data size
- (*note --data-size::). About 4.5 MiB.
+ (*note --data-size::). Default is 4.5 MiB.
* For compression at other levels; 11 times the dictionary size plus
3 times the data size. Default is 136 MiB.
* For decompression of a regular (seekable) file to another regular
- file, or for testing of a regular file; the dictionary size. Note
- that regular files with more than 1024 bytes of trailing garbage
- are treated as non-seekable.
+ file, or for testing of a regular file; the dictionary size.
+
+ (Note that regular files with more than 1024 bytes of trailing
+ garbage are treated as non-seekable).
* For testing of a non-seekable file or of standard input; the
dictionary size plus up to 5 MiB.
@@ -493,15 +495,15 @@ Concept index

Tag Table:
Node: Top221
-Node: Introduction988
-Node: Program design5285
-Node: Invoking plzip6874
-Ref: --data-size7288
-Node: File format12512
-Node: Memory requirements14925
-Node: Minimum file sizes16029
-Node: Problems17951
-Node: Concept index18487
+Node: Introduction984
+Node: Invoking plzip5332
+Ref: --data-size5747
+Node: Program design10972
+Node: File format12560
+Node: Memory requirements14973
+Node: Minimum file sizes16085
+Node: Problems18007
+Node: Concept index18543

End Tag Table
diff --git a/doc/plzip.texi b/doc/plzip.texi
index b501b9a..e13515a 100644
--- a/doc/plzip.texi
+++ b/doc/plzip.texi
@@ -6,8 +6,8 @@
@finalout
@c %**end of header
-@set UPDATED 23 May 2015
-@set VERSION 1.4-rc1
+@set UPDATED 9 July 2015
+@set VERSION 1.4
@dircategory Data Compression
@direntry
@@ -36,8 +36,8 @@ This manual is for Plzip (version @value{VERSION}, @value{UPDATED}).
@menu
* Introduction:: Purpose and features of plzip
-* Program design:: Internal structure of plzip
* Invoking plzip:: Command line interface
+* Program design:: Internal structure of plzip
* File format:: Detailed format of the compressed file
* Memory requirements:: Memory required to compress and decompress
* Minimum file sizes:: Minimum file sizes required for full speed
@@ -77,10 +77,14 @@ availability:
@itemize @bullet
@item
The lzip format provides very safe integrity checking and some data
-recovery means. The lziprecover program can repair bit-flip errors (one
-of the most common forms of data corruption) in lzip files, and provides
-data recovery capabilities, including error-checked merging of damaged
-copies of a file.
+recovery means. The
+@uref{http://www.nongnu.org/lzip/manual/lziprecover_manual.html#Data-safety,,lziprecover}
+program can repair bit-flip errors (one of the most common forms of data
+corruption) in lzip files, and provides data recovery capabilities,
+including error-checked merging of damaged copies of a file.
+@ifnothtml
+@ref{Data safety,,,lziprecover}.
+@end ifnothtml
@item
The lzip format is as simple as possible (but not simpler). The lzip
@@ -148,38 +152,6 @@ you verify the compressed file with a command like
@w{@samp{plzip -cd file.lz | cmp file -}}.
-@node Program design
-@chapter Program design
-@cindex program design
-
-When compressing, plzip divides the input file into chunks and
-compresses as many chunks simultaneously as worker threads are chosen,
-creating a multi-member compressed file.
-
-When decompressing, plzip decompresses as many members simultaneously as
-worker threads are chosen. Files that were compressed with lzip will not
-be decompressed faster than using lzip (unless the @samp{-b} option was
-used) because lzip usually produces single-member files, which can't be
-decompressed in parallel.
-
-For each input file, a splitter thread and several worker threads are
-created, acting the main thread as muxer (multiplexer) thread. A "packet
-courier" takes care of data transfers among threads and limits the
-maximum number of data blocks (packets) being processed simultaneously.
-
-The splitter reads data blocks from the input file, and distributes them
-to the workers. The workers (de)compress the blocks received from the
-splitter. The muxer collects processed packets from the workers, and
-writes them to the output file.
-
-When decompressing from a regular file, the splitter is removed and the
-workers read directly from the input file. If the output file is also a
-regular file, the muxer is also removed and the workers write directly
-to the output file. With these optimizations, the use of RAM is greatly
-reduced and the decompression speed of large files with many members is
-only limited by the number of processors available and by I/O speed.
-
-
@node Invoking plzip
@chapter Invoking plzip
@cindex invoking
@@ -229,7 +201,7 @@ Force overwrite of output files.
@item -F
@itemx --recompress
-Force recompression of files whose name already has the @samp{.lz} or
+Force re-compression of files whose name already has the @samp{.lz} or
@samp{.tlz} suffix.
@item -k
@@ -346,6 +318,38 @@ invalid input file, 3 for an internal consistency error (eg, bug) which
caused plzip to panic.
+@node Program design
+@chapter Program design
+@cindex program design
+
+When compressing, plzip divides the input file into chunks and
+compresses as many chunks simultaneously as worker threads are chosen,
+creating a multi-member compressed file.
+
+When decompressing, plzip decompresses as many members simultaneously as
+worker threads are chosen. Files that were compressed with lzip will not
+be decompressed faster than using lzip (unless the @samp{-b} option was
+used) because lzip usually produces single-member files, which can't be
+decompressed in parallel.
+
+For each input file, a splitter thread and several worker threads are
+created, acting the main thread as muxer (multiplexer) thread. A "packet
+courier" takes care of data transfers among threads and limits the
+maximum number of data blocks (packets) being processed simultaneously.
+
+The splitter reads data blocks from the input file, and distributes them
+to the workers. The workers (de)compress the blocks received from the
+splitter. The muxer collects processed packets from the workers, and
+writes them to the output file.
+
+When decompressing from a regular file, the splitter is removed and the
+workers read directly from the input file. If the output file is also a
+regular file, the muxer is also removed and the workers write directly
+to the output file. With these optimizations, the use of RAM is greatly
+reduced and the decompression speed of large files with many members is
+only limited by the number of processors available and by I/O speed.
+
+
@node File format
@chapter File format
@cindex file format
@@ -439,7 +443,7 @@ following:
@itemize @bullet
@item
For compression at level -0; 1.5 MiB plus 3 times the data size
-(@pxref{--data-size}). About 4.5 MiB.
+(@pxref{--data-size}). Default is 4.5 MiB.
@item
For compression at other levels; 11 times the dictionary size plus 3
@@ -447,9 +451,10 @@ times the data size. Default is 136 MiB.
@item
For decompression of a regular (seekable) file to another regular file,
-or for testing of a regular file; the dictionary size. Note that regular
-files with more than 1024 bytes of trailing garbage are treated as
-non-seekable.
+or for testing of a regular file; the dictionary size.
+
+(Note that regular files with more than 1024 bytes of trailing garbage
+are treated as non-seekable).
@item
For testing of a non-seekable file or of standard input; the dictionary
diff --git a/file_index.cc b/file_index.cc
index 0e3eed9..7e265a1 100644
--- a/file_index.cc
+++ b/file_index.cc
@@ -40,7 +40,7 @@ int seek_read( const int fd, uint8_t * const buf, const int size,
void File_index::set_errno_error( const char * const msg )
{
- error_ = msg; error_ += std::strerror( errno ); error_ += '.';
+ error_ = msg; error_ += std::strerror( errno );
retval_ = 1;
}
diff --git a/file_index.h b/file_index.h
index 2323928..1159f1d 100644
--- a/file_index.h
+++ b/file_index.h
@@ -54,7 +54,7 @@ class File_index
void set_errno_error( const char * const msg );
void set_num_error( const char * const msg1, unsigned long long num,
- const char * const msg2 = "." );
+ const char * const msg2 = "" );
public:
explicit File_index( const int infd );
diff --git a/lzip.h b/lzip.h
index e9724cc..cef99dc 100644
--- a/lzip.h
+++ b/lzip.h
@@ -69,9 +69,9 @@ const uint8_t magic_string[4] = { 0x4C, 0x5A, 0x49, 0x50 }; // "LZIP"
struct File_header
{
- uint8_t data[6]; /* 0-3 magic bytes */
- /* 4 version */
- /* 5 coded_dict_size */
+ uint8_t data[6]; // 0-3 magic bytes
+ // 4 version
+ // 5 coded_dict_size
enum { size = 6 };
void set_magic() { std::memcpy( data, magic_string, 4 ); data[4] = 1; }
@@ -111,9 +111,9 @@ struct File_header
struct File_trailer
{
- uint8_t data[20]; /* 0-3 CRC32 of the uncompressed data */
- /* 4-11 size of the uncompressed data */
- /* 12-19 member size including header and trailer */
+ uint8_t data[20]; // 0-3 CRC32 of the uncompressed data
+ // 4-11 size of the uncompressed data
+ // 12-19 member size including header and trailer
enum { size = 20 };
diff --git a/main.cc b/main.cc
index 94baeaa..a2c1287 100644
--- a/main.cc
+++ b/main.cc
@@ -82,8 +82,8 @@ struct { const char * from; const char * to; } const known_extensions[] = {
struct Lzma_options
{
- int dictionary_size; /* 4 KiB .. 512 MiB */
- int match_len_limit; /* 5 .. 273 */
+ int dictionary_size; // 4 KiB .. 512 MiB
+ int match_len_limit; // 5 .. 273
};
enum Mode { m_compress, m_decompress, m_test };
@@ -107,7 +107,7 @@ void show_help( const long num_online )
" -c, --stdout send output to standard output\n"
" -d, --decompress decompress\n"
" -f, --force overwrite existing output files\n"
- " -F, --recompress force recompression of compressed files\n"
+ " -F, --recompress force re-compression of compressed files\n"
" -k, --keep keep (don't delete) input files\n"
" -m, --match-length=<bytes> set match length limit in bytes [36]\n"
" -n, --threads=<n> set number of (de)compression threads [%ld]\n"
@@ -145,7 +145,7 @@ void show_version()
std::printf( "%s %s\n", program_name, PROGVERSION );
std::printf( "Copyright (C) 2009 Laszlo Ersek.\n"
"Copyright (C) %s Antonio Diaz Diaz.\n", program_year );
- std::printf( "Using Lzlib %s\n", LZ_version() );
+ std::printf( "Using lzlib %s\n", LZ_version() );
std::printf( "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n" );
@@ -189,7 +189,7 @@ unsigned long long getnum( const char * const ptr,
if( !errno && tail[0] )
{
- int factor = ( tail[1] == 'i' ) ? 1024 : 1000;
+ const int factor = ( tail[1] == 'i' ) ? 1024 : 1000;
int exponent = 0;
bool bad_multiplier = false;
switch( tail[0] )
@@ -273,7 +273,7 @@ int open_instream( const char * const name, struct stat * const in_statsp,
if( infd < 0 )
{
if( verbosity >= 0 )
- std::fprintf( stderr, "%s: Can't open input file '%s': %s.\n",
+ std::fprintf( stderr, "%s: Can't open input file '%s': %s\n",
program_name, name, std::strerror( errno ) );
}
else
@@ -290,7 +290,7 @@ int open_instream( const char * const name, struct stat * const in_statsp,
std::fprintf( stderr, "%s: Input file '%s' is not a regular file%s.\n",
program_name, name,
( can_read && !no_ofile ) ?
- " and '--stdout' was not specified" : "" );
+ ",\n and '--stdout' was not specified" : "" );
close( infd );
infd = -1;
}
@@ -321,7 +321,7 @@ void set_d_outname( const std::string & name, const int i )
}
output_filename = name; output_filename += ".out";
if( verbosity >= 1 )
- std::fprintf( stderr, "%s: Can't guess original name for '%s' -- using '%s'.\n",
+ std::fprintf( stderr, "%s: Can't guess original name for '%s' -- using '%s'\n",
program_name, name.c_str(), output_filename.c_str() );
}
@@ -338,7 +338,7 @@ bool open_outstream( const bool force )
std::fprintf( stderr, "%s: Output file '%s' already exists, skipping.\n",
program_name, output_filename.c_str() );
else
- std::fprintf( stderr, "%s: Can't create output file '%s': %s.\n",
+ std::fprintf( stderr, "%s: Can't create output file '%s': %s\n",
program_name, output_filename.c_str(), std::strerror( errno ) );
}
return ( outfd >= 0 );
@@ -388,14 +388,14 @@ void cleanup_and_fail( const int retval )
namespace {
- /* Set permissions, owner and times. */
+ // Set permissions, owner and times.
void close_and_set_permissions( const struct stat * const in_statsp )
{
bool warning = false;
if( in_statsp )
{
const mode_t mode = in_statsp->st_mode;
- /* fchown will in many cases return with EPERM, which can be safely ignored. */
+ // fchown will in many cases return with EPERM, which can be safely ignored.
if( fchown( outfd, in_statsp->st_uid, in_statsp->st_gid ) == 0 )
{ if( fchmod( outfd, mode ) != 0 ) warning = true; }
else
@@ -438,23 +438,6 @@ void set_signals()
int verbosity = 0;
-void Pretty_print::operator()( const char * const msg ) const
- {
- if( verbosity >= 0 )
- {
- if( first_post )
- {
- first_post = false;
- std::fprintf( stderr, " %s: ", name_.c_str() );
- for( unsigned i = 0; i < longest_name - name_.size(); ++i )
- std::fprintf( stderr, " " );
- if( !msg ) std::fflush( stderr );
- }
- if( msg ) std::fprintf( stderr, "%s\n", msg );
- }
- }
-
-
void show_error( const char * const msg, const int errcode, const bool help )
{
if( verbosity >= 0 )
@@ -463,8 +446,8 @@ void show_error( const char * const msg, const int errcode, const bool help )
{
std::fprintf( stderr, "%s: %s", program_name, msg );
if( errcode > 0 )
- std::fprintf( stderr, ": %s.", std::strerror( errcode ) );
- std::fprintf( stderr, "\n" );
+ std::fprintf( stderr, ": %s", std::strerror( errcode ) );
+ std::fputc( '\n', stderr );
}
if( help )
std::fprintf( stderr, "Try '%s --help' for more information.\n",
@@ -485,7 +468,7 @@ void show_progress( const int packet_size,
const Pretty_print * const p,
const unsigned long long cfile_size )
{
- static unsigned long long csize = 0; /* file_size / 100 */
+ static unsigned long long csize = 0; // file_size / 100
static unsigned long long pos = 0;
static const Pretty_print * pp = 0;
static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
@@ -514,16 +497,16 @@ int main( const int argc, const char * const argv[] )
to the corresponding LZMA compression modes. */
const Lzma_options option_mapping[] =
{
- { 65535, 16 }, /* -0 */
- { 1 << 20, 5 }, /* -1 */
- { 3 << 19, 6 }, /* -2 */
- { 1 << 21, 8 }, /* -3 */
- { 3 << 20, 12 }, /* -4 */
- { 1 << 22, 20 }, /* -5 */
- { 1 << 23, 36 }, /* -6 */
- { 1 << 24, 68 }, /* -7 */
- { 3 << 23, 132 }, /* -8 */
- { 1 << 25, 273 } }; /* -9 */
+ { 65535, 16 }, // -0
+ { 1 << 20, 5 }, // -1
+ { 3 << 19, 6 }, // -2
+ { 1 << 21, 8 }, // -3
+ { 3 << 20, 12 }, // -4
+ { 1 << 22, 20 }, // -5
+ { 1 << 23, 36 }, // -6
+ { 1 << 24, 68 }, // -7
+ { 3 << 23, 132 }, // -8
+ { 1 << 25, 273 } }; // -9
Lzma_options encoder_options = option_mapping[6]; // default = "-6"
std::string input_filename;
std::string default_output_filename;
@@ -587,7 +570,7 @@ int main( const int argc, const char * const argv[] )
for( ; argind < parser.arguments(); ++argind )
{
const int code = parser.code( argind );
- if( !code ) break; /* no more options */
+ if( !code ) break; // no more options
const std::string & arg = parser.argument( argind );
switch( code )
{
@@ -618,7 +601,7 @@ int main( const int argc, const char * const argv[] )
case 'V': show_version(); return 0;
default : internal_error( "uncaught option." );
}
- } /* end process options */
+ } // end process options
#if defined(__MSVCRT__) || defined(__OS2__)
setmode( STDIN_FILENO, O_BINARY );
@@ -628,13 +611,14 @@ int main( const int argc, const char * const argv[] )
if( program_mode == m_test )
outfd = -1;
+ const bool fast = encoder_options.dictionary_size == 65535 &&
+ encoder_options.match_len_limit == 16;
if( data_size <= 0 )
{
- if( encoder_options.dictionary_size == 65535 &&
- encoder_options.match_len_limit == 16 ) data_size = 1 << 20;
+ if( fast ) data_size = 1 << 20;
else data_size = 2 * std::max( 65536, encoder_options.dictionary_size );
}
- else if( data_size < encoder_options.dictionary_size )
+ else if( !fast && data_size < encoder_options.dictionary_size )
encoder_options.dictionary_size =
std::max( data_size, LZ_min_dictionary_size() );
diff --git a/testsuite/check.sh b/testsuite/check.sh
index 88e8f83..b054bf1 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -79,7 +79,6 @@ printf .
cat in in > in2 || framework_failure
"${LZIP}" -o copy2 < in2 || fail=1
"${LZIP}" -t copy2.lz || fail=1
-printf .
"${LZIP}" -cd copy2.lz > copy2 || fail=1
cmp in2 copy2 || fail=1
printf .