Adding upstream version 1.0.upstream/1.0

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>

10 files changed, 162 insertions, 109 deletions

diff --git a/ChangeLog b/ChangeLog
index 1a3691e..9387b90 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,11 +1,12 @@
-2013-03-08  Antonio Diaz Diaz  <ant_diaz@teleline.es>
+2013-05-29  Antonio Diaz Diaz  <antonio@gnu.org>
 
-	* Version 1.0-rc1 released.
+	* Version 1.0 released.
 	* compress.cc: 'deliver_packet' changed to 'deliver_packets'.
 	* Scalability of decompression from/to regular files has been
 	  increased by removing splitter and muxer when not needed.
 	* The number of worker threads is now limited to the number of
 	  members when decompressing from a regular file.
+	* configure: Options now accept a separate argument.
 	* Makefile.in: Added new target 'install-as-lzip'.
 	* Makefile.in: Added new target 'install-bin'.
 	* main.cc: Use 'setmode' instead of '_setmode' on Windows and OS/2.
diff --git a/INSTALL b/INSTALL
index 3ef3e11..0617b4c 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,7 +1,7 @@
 Requirements
 ------------
 You will need a C++ compiler and the lzlib compression library installed.
-I use gcc 4.7.2 and 3.3.6, but the code should compile with any
+I use gcc 4.8.0 and 3.3.6, but the code should compile with any
 standards compliant compiler.
 Lzlib must be version 1.0 or newer.
 Gcc is available at http://gcc.gnu.org.
@@ -38,8 +38,9 @@ the main archive.
    typing 'make install-bin', 'make install-info' or 'make install-man'
    respectively.
 
-5a. Type 'make install-as-lzip' to install the program and any data
-    files and documentation, and link the program to the name 'lzip'.
+   Instead of 'make install', you can type 'make install-as-lzip' to
+   install the program and any data files and documentation, and link
+   the program to the name 'lzip'.
 
 
 Another way
diff --git a/NEWS b/NEWS
index 124d02a..2bc2d78 100644
--- a/NEWS
+++ b/NEWS
@@ -8,6 +8,8 @@ Scalability when decompressing from/to regular files has been increased.
 The number of worker threads is now limited to the number of members in
 the input file when decompressing from a regular file.
 
+"configure" now accepts options with a separate argument.
+
 The target "install-as-lzip" has been added to the Makefile.
 
 The target "install-bin" has been added to the Makefile.
diff --git a/README b/README
index 3f1d72b..a2c9a34 100644
--- a/README
+++ b/README
@@ -3,13 +3,18 @@ Description
 Plzip is a massively parallel (multi-threaded), lossless data compressor
 based on the lzlib compression library, with very safe integrity
 checking and a user interface similar to the one of bzip2, gzip or lzip.
-Plzip uses the lzip file format; the files produced by plzip are fully
-compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
 
 Plzip is intended for faster compression/decompression of big files on
 multiprocessor machines, which makes it specially well suited for
 distribution of big software files and large scale data archiving. On
-files big enough, plzip can use hundreds of processors.
+files big enough (several GB), plzip can use hundreds of processors.
+
+Plzip uses the lzip file format; the files produced by plzip are fully
+compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
+
+Plzip uses the same well-defined exit status values used by lzip and
+bzip2, which makes it safer when used in pipes or scripts than
+compressors returning ambiguous warning values, like gzip.
 
 Plzip replaces every file given in the command line with a compressed
 version of itself, with the name "original_name.lz". Each compressed
@@ -29,15 +34,16 @@ corresponding uncompressed files. Integrity testing of concatenated
 compressed files is also supported.
 
 As a self-check for your protection, plzip stores in the member trailer
-the 32-bit CRC of the original data and the size of the original data,
-to make sure that the decompressed version of the data is identical to
-the original. This guards against corruption of the compressed data, and
-against undetected bugs in plzip (hopefully very unlikely). The chances
-of data corruption going undetected are microscopic, less than one
-chance in 4000 million for each member processed. Be aware, though, that
-the check occurs upon decompression, so it can only tell you that
-something is wrong. It can't help you recover the original uncompressed
-data.
+the 32-bit CRC of the original data, the size of the original data and
+the size of the member. These values, together with the value remaining
+in the range decoder and the end-of-stream marker, provide a very safe 4
+factor integrity checking which guarantees that the decompressed version
+of the data is identical to the original. This guards against corruption
+of the compressed data, and against undetected bugs in plzip (hopefully
+very unlikely). The chances of data corruption going undetected are
+microscopic. Be aware, though, that the check occurs upon decompression,
+so it can only tell you that something is wrong. It can't help you
+recover the original uncompressed data.
 
 
 Copyright (C) 2009, 2010, 2011, 2012, 2013 Antonio Diaz Diaz.
diff --git a/configure b/configure
index c4d3f0a..6a70567 100755
--- a/configure
+++ b/configure
@@ -5,10 +5,8 @@
 # This configure script is free software: you have unlimited permission
 # to copy, distribute and modify it.
 
-args=
-no_create=
 pkgname=plzip
-pkgversion=1.0-rc1
+pkgversion=1.0
 progname=plzip
 srctrigger=doc/plzip.texinfo
 
@@ -28,18 +26,19 @@ CXXFLAGS='-Wall -W -O2'
 LDFLAGS=
 
 # checking whether we are using GNU C++.
-if [ ! -x /bin/g++ ] &&
-   [ ! -x /usr/bin/g++ ] &&
-   [ ! -x /usr/local/bin/g++ ] ; then
+${CXX} --version > /dev/null 2>&1
+if [ $? != 0 ] ; then
 	CXX=c++
 	CXXFLAGS='-W -O2'
 fi
 
 # Loop over all args
-while [ -n "$1" ] ; do
+args=
+no_create=
+while [ $# != 0 ] ; do
 
 	# Get the first arg, and shuffle
-	option=$1
+	option=$1 ; arg2=no
 	shift
 
 	# Add the argument quoted to args
@@ -74,6 +73,14 @@ while [ -n "$1" ] ; do
 	--version | -V)
 		echo "Configure script for ${pkgname} version ${pkgversion}"
 		exit 0 ;;
+	--srcdir)            srcdir=$1 ; arg2=yes ;;
+	--prefix)            prefix=$1 ; arg2=yes ;;
+	--exec-prefix)  exec_prefix=$1 ; arg2=yes ;;
+	--bindir)            bindir=$1 ; arg2=yes ;;
+	--datarootdir)  datarootdir=$1 ; arg2=yes ;;
+	--infodir)          infodir=$1 ; arg2=yes ;;
+	--mandir)            mandir=$1 ; arg2=yes ;;
+
 	--srcdir=*)            srcdir=${optarg} ;;
 	--prefix=*)            prefix=${optarg} ;;
 	--exec-prefix=*)  exec_prefix=${optarg} ;;
@@ -88,11 +95,22 @@ while [ -n "$1" ] ; do
 	CXXFLAGS=*) CXXFLAGS=${optarg} ;;
 	LDFLAGS=*)   LDFLAGS=${optarg} ;;
 
-	--* | *=* | *-*-*) ;;
+	--*)
+		echo "configure: WARNING: unrecognized option: '${option}'" 1>&2 ;;
+	*=* | *-*-*) ;;
 	*)
-		echo "configure: Unrecognized option: \"${option}\"; use --help for usage." 1>&2
+		echo "configure: unrecognized option: '${option}'" 1>&2
+		echo "Try 'configure --help' for more information."
 		exit 1 ;;
 	esac
+
+	# Check if the option took a separate argument
+	if [ "${arg2}" = yes ] ; then
+		if [ $# != 0 ] ; then args="${args} \"$1\"" ; shift
+		else echo "configure: Missing argument to \"${option}\"" 1>&2
+			exit 1
+		fi
+	fi
 done
 
 # Find the source files, if location was not specified.
diff --git a/doc/plzip.1 b/doc/plzip.1
index 2b1261b..5b91105 100644
--- a/doc/plzip.1
+++ b/doc/plzip.1
@@ -1,5 +1,5 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.37.1.
-.TH PLZIP "1" "March 2013" "Plzip 1.0-rc1" "User Commands"
+.TH PLZIP "1" "May 2013" "Plzip 1.0" "User Commands"
 .SH NAME
 Plzip \- reduces the size of files
 .SH SYNOPSIS
@@ -71,6 +71,11 @@ The bidimensional parameter space of LZMA can't be mapped to a linear
 scale optimal for all files. If your files are large, very repetitive,
 etc, you may need to use the \fB\-\-match\-length\fR and \fB\-\-dictionary\-size\fR
 options directly to achieve optimal performance.
+.PP
+Exit status: 0 for a normal exit, 1 for environmental problems (file
+not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
+invalid input file, 3 for an internal consistency error (eg, bug) which
+caused plzip to panic.
 .SH "REPORTING BUGS"
 Report bugs to lzip\-bug@nongnu.org
 .br
@@ -79,7 +84,7 @@ Plzip home page: http://www.nongnu.org/lzip/plzip.html
 Copyright \(co 2009 Laszlo Ersek.
 .br
 Copyright \(co 2013 Antonio Diaz Diaz.
-Using Lzlib 1.4\-rc2
+Using Lzlib 1.4
 License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
 .br
 This is free software: you are free to change and redistribute it.
diff --git a/doc/plzip.info b/doc/plzip.info
index bf22e32..2070f4f 100644
--- a/doc/plzip.info
+++ b/doc/plzip.info
@@ -12,16 +12,16 @@ File: plzip.info,  Node: Top,  Next: Introduction,  Up: (dir)
 Plzip Manual
 ************
 
-This manual is for Plzip (version 1.0-rc1, 8 March 2013).
+This manual is for Plzip (version 1.0, 29 May 2013).
 
 * Menu:
 
-* Introduction::          Purpose and features of plzip
-* Program Design::        Internal structure of plzip
-* Invoking Plzip::        Command line interface
-* File Format::           Detailed format of the compressed file
-* Problems::              Reporting bugs
-* Concept Index::         Index of concepts
+* Introduction::           Purpose and features of plzip
+* Program Design::         Internal structure of plzip
+* Invoking Plzip::         Command line interface
+* File Format::            Detailed format of the compressed file
+* Problems::               Reporting bugs
+* Concept Index::          Index of concepts
 
 
    Copyright (C) 2009, 2010, 2011, 2012, 2013 Antonio Diaz Diaz.
@@ -38,13 +38,19 @@ File: plzip.info,  Node: Introduction,  Next: Program Design,  Prev: Top,  Up: T
 Plzip is a massively parallel (multi-threaded), lossless data compressor
 based on the lzlib compression library, with very safe integrity
 checking and a user interface similar to the one of bzip2, gzip or lzip.
-Plzip uses the lzip file format; the files produced by plzip are fully
-compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
 
    Plzip is intended for faster compression/decompression of big files
 on multiprocessor machines, which makes it specially well suited for
 distribution of big software files and large scale data archiving. On
-files big enough, plzip can use hundreds of processors.
+files big enough (several GB), plzip can use hundreds of processors.
+
+   Plzip uses the lzip file format; the files produced by plzip are
+fully compatible with lzip-1.4 or newer, and can be rescued with
+lziprecover.
+
+   Plzip uses the same well-defined exit status values used by lzip and
+bzip2, which makes it safer when used in pipes or scripts than
+compressors returning ambiguous warning values, like gzip.
 
    Plzip replaces every file given in the command line with a compressed
 version of itself, with the name "original_name.lz". Each compressed
@@ -71,15 +77,16 @@ filename.tlz   becomes   filename.tar
 anyothername   becomes   anyothername.out
 
    As a self-check for your protection, plzip stores in the member
-trailer the 32-bit CRC of the original data and the size of the
-original data, to make sure that the decompressed version of the data
-is identical to the original. This guards against corruption of the
-compressed data, and against undetected bugs in plzip (hopefully very
-unlikely). The chances of data corruption going undetected are
-microscopic, less than one chance in 4000 million for each member
-processed. Be aware, though, that the check occurs upon decompression,
-so it can only tell you that something is wrong. It can't help you
-recover the original uncompressed data.
+trailer the 32-bit CRC of the original data, the size of the original
+data and the size of the member. These values, together with the value
+remaining in the range decoder and the end-of-stream marker, provide a
+very safe 4 factor integrity checking which guarantees that the
+decompressed version of the data is identical to the original. This
+guards against corruption of the compressed data, and against
+undetected bugs in plzip (hopefully very unlikely). The chances of data
+corruption going undetected are microscopic. Be aware, though, that the
+check occurs upon decompression, so it can only tell you that something
+is wrong. It can't help you recover the original uncompressed data.
 
    WARNING! Even if plzip is bug-free, other causes may result in a
 corrupt compressed file (bugs in the system libraries, memory errors,
@@ -88,11 +95,6 @@ give the `--keep' option to plzip and do not remove the original file
 until you verify the compressed file with a command like
 `plzip -cd file.lz | cmp file -'.
 
-   Return values: 0 for a normal exit, 1 for environmental problems
-(file not found, invalid flags, I/O errors, etc), 2 to indicate a
-corrupt or invalid input file, 3 for an internal consistency error (eg,
-bug) which caused plzip to panic.
-
 
 File: plzip.info,  Node: Program Design,  Next: Invoking Plzip,  Prev: Introduction,  Up: Top
 
@@ -266,6 +268,12 @@ E        exabyte   (10^18)         |   Ei       exbibyte (2^60)
 Z        zettabyte (10^21)         |   Zi       zebibyte (2^70)
 Y        yottabyte (10^24)         |   Yi       yobibyte (2^80)
 
+
+   Exit status: 0 for a normal exit, 1 for environmental problems (file
+not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
+invalid input file, 3 for an internal consistency error (eg, bug) which
+caused plzip to panic.
+
 
 File: plzip.info,  Node: File Format,  Next: Problems,  Prev: Invoking Plzip,  Up: Top
 
@@ -323,7 +331,8 @@ additional information before, between, or after them.
 
 `Lzma stream'
      The lzma stream, finished by an end of stream marker. Uses default
-     values for encoder properties.
+     values for encoder properties. See the lzip manual for a full
+     description.
 
 `CRC32 (4 bytes)'
      CRC of the uncompressed original data.
@@ -333,8 +342,9 @@ additional information before, between, or after them.
 
 `Member size (8 bytes)'
      Total size of the member, including header and trailer. This field
-     acts as a distributed index, and facilitates safe recovery of
-     undamaged members from multi-member files.
+     acts as a distributed index, allows the verification of stream
+     integrity, and facilitates safe recovery of undamaged members from
+     multi-member files.
 
 
 
@@ -375,12 +385,12 @@ Concept Index
 
 Tag Table:
 Node: Top223
-Node: Introduction864
-Node: Program Design4030
-Node: Invoking Plzip5084
-Node: File Format10093
-Node: Problems12473
-Node: Concept Index13002
+Node: Introduction865
+Node: Program Design4113
+Node: Invoking Plzip5167
+Node: File Format10416
+Node: Problems12895
+Node: Concept Index13424
 
 End Tag Table
 
diff --git a/doc/plzip.texinfo b/doc/plzip.texinfo
index 5e62234..b832884 100644
--- a/doc/plzip.texinfo
+++ b/doc/plzip.texinfo
@@ -6,8 +6,8 @@
 @finalout
 @c %**end of header
 
-@set UPDATED 8 March 2013
-@set VERSION 1.0-rc1
+@set UPDATED 29 May 2013
+@set VERSION 1.0
 
 @dircategory Data Compression
 @direntry
@@ -35,12 +35,12 @@
 This manual is for Plzip (version @value{VERSION}, @value{UPDATED}).
 
 @menu
-* Introduction::          Purpose and features of plzip
-* Program Design::        Internal structure of plzip
-* Invoking Plzip::        Command line interface
-* File Format::           Detailed format of the compressed file
-* Problems::              Reporting bugs
-* Concept Index::         Index of concepts
+* Introduction::           Purpose and features of plzip
+* Program Design::         Internal structure of plzip
+* Invoking Plzip::         Command line interface
+* File Format::            Detailed format of the compressed file
+* Problems::               Reporting bugs
+* Concept Index::          Index of concepts
 @end menu
 
 @sp 1
@@ -57,13 +57,18 @@ to copy, distribute and modify it.
 Plzip is a massively parallel (multi-threaded), lossless data compressor
 based on the lzlib compression library, with very safe integrity
 checking and a user interface similar to the one of bzip2, gzip or lzip.
-Plzip uses the lzip file format; the files produced by plzip are fully
-compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
 
 Plzip is intended for faster compression/decompression of big files on
 multiprocessor machines, which makes it specially well suited for
 distribution of big software files and large scale data archiving. On
-files big enough, plzip can use hundreds of processors.
+files big enough (several GB), plzip can use hundreds of processors.
+
+Plzip uses the lzip file format; the files produced by plzip are fully
+compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
+
+Plzip uses the same well-defined exit status values used by lzip and
+bzip2, which makes it safer when used in pipes or scripts than
+compressors returning ambiguous warning values, like gzip.
 
 Plzip replaces every file given in the command line with a compressed
 version of itself, with the name "original_name.lz". Each compressed
@@ -92,15 +97,16 @@ file from that of the compressed file as follows:
 @end multitable
 
 As a self-check for your protection, plzip stores in the member trailer
-the 32-bit CRC of the original data and the size of the original data,
-to make sure that the decompressed version of the data is identical to
-the original. This guards against corruption of the compressed data, and
-against undetected bugs in plzip (hopefully very unlikely). The chances
-of data corruption going undetected are microscopic, less than one
-chance in 4000 million for each member processed. Be aware, though, that
-the check occurs upon decompression, so it can only tell you that
-something is wrong. It can't help you recover the original uncompressed
-data.
+the 32-bit CRC of the original data, the size of the original data and
+the size of the member. These values, together with the value remaining
+in the range decoder and the end-of-stream marker, provide a very safe 4
+factor integrity checking which guarantees that the decompressed version
+of the data is identical to the original. This guards against corruption
+of the compressed data, and against undetected bugs in plzip (hopefully
+very unlikely). The chances of data corruption going undetected are
+microscopic. Be aware, though, that the check occurs upon decompression,
+so it can only tell you that something is wrong. It can't help you
+recover the original uncompressed data.
 
 WARNING! Even if plzip is bug-free, other causes may result in a corrupt
 compressed file (bugs in the system libraries, memory errors, etc).
@@ -109,11 +115,6 @@ Therefore, if the data you are going to compress is important, give the
 you verify the compressed file with a command like
 @w{@samp{plzip -cd file.lz | cmp file -}}.
 
-Return values: 0 for a normal exit, 1 for environmental problems (file
-not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
-invalid input file, 3 for an internal consistency error (eg, bug) which
-caused plzip to panic.
-
 
 @node Program Design
 @chapter Program Design
@@ -289,6 +290,12 @@ Table of SI and binary prefixes (unit multipliers):
 @item Y @tab yottabyte (10^24)        @tab | @tab Yi @tab yobibyte (2^80)
 @end multitable
 
+@sp 1
+Exit status: 0 for a normal exit, 1 for environmental problems (file not
+found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
+invalid input file, 3 for an internal consistency error (eg, bug) which
+caused plzip to panic.
+
 
 @node File Format
 @chapter File Format
@@ -349,7 +356,7 @@ Valid values for dictionary size range from 4KiB to 512MiB.
 
 @item Lzma stream
 The lzma stream, finished by an end of stream marker. Uses default values
-for encoder properties.
+for encoder properties. See the lzip manual for a full description.
 
 @item CRC32 (4 bytes)
 CRC of the uncompressed original data.
@@ -359,8 +366,8 @@ Size of the uncompressed original data.
 
 @item Member size (8 bytes)
 Total size of the member, including header and trailer. This field acts
-as a distributed index, and facilitates safe recovery of undamaged
-members from multi-member files.
+as a distributed index, allows the verification of stream integrity, and
+facilitates safe recovery of undamaged members from multi-member files.
 
 @end table
 
diff --git a/main.cc b/main.cc
index 974a268..4ec73df 100644
--- a/main.cc
+++ b/main.cc
@@ -16,7 +16,7 @@
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 /*
-    Return values: 0 for a normal exit, 1 for environmental problems
+    Exit status: 0 for a normal exit, 1 for environmental problems
     (file not found, invalid flags, I/O errors, etc), 2 to indicate a
     corrupt or invalid input file, 3 for an internal consistency error
     (eg, bug) which caused plzip to panic.
@@ -135,6 +135,10 @@ void show_help( const long num_online )
                "scale optimal for all files. If your files are large, very repetitive,\n"
                "etc, you may need to use the --match-length and --dictionary-size\n"
                "options directly to achieve optimal performance.\n"
+               "\nExit status: 0 for a normal exit, 1 for environmental problems (file\n"
+               "not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or\n"
+               "invalid input file, 3 for an internal consistency error (eg, bug) which\n"
+               "caused plzip to panic.\n"
                "\nReport bugs to lzip-bug@nongnu.org\n"
                "Plzip home page: http://www.nongnu.org/lzip/plzip.html\n" );
   }
@@ -156,8 +160,8 @@ unsigned long long getnum( const char * const ptr,
                            const unsigned long long llimit,
                            const unsigned long long ulimit )
   {
-  errno = 0;
   char * tail;
+  errno = 0;
   unsigned long long result = strtoull( ptr, &tail, 0 );
   if( tail == ptr )
     {
@@ -231,7 +235,7 @@ int extension_index( const std::string & name )
   }
 
 
-int open_instream( const std::string & name, struct stat * const in_statsp,
+int open_instream( const char * const name, struct stat * const in_statsp,
                    const Mode program_mode, const int eindex,
                    const bool recompress, const bool to_stdout )
   {
@@ -240,17 +244,16 @@ int open_instream( const std::string & name, struct stat * const in_statsp,
     {
     if( verbosity >= 0 )
       std::fprintf( stderr, "%s: Input file '%s' already has '%s' suffix.\n",
-                    program_name, name.c_str(),
-                    known_extensions[eindex].from );
+                    program_name, name, known_extensions[eindex].from );
     }
   else
     {
-    infd = open( name.c_str(), O_RDONLY | o_binary );
+    infd = open( name, O_RDONLY | o_binary );
     if( infd < 0 )
       {
       if( verbosity >= 0 )
         std::fprintf( stderr, "%s: Can't open input file '%s': %s.\n",
-                      program_name, name.c_str(), std::strerror( errno ) );
+                      program_name, name, std::strerror( errno ) );
       }
     else
       {
@@ -263,7 +266,7 @@ int open_instream( const std::string & name, struct stat * const in_statsp,
         {
         if( verbosity >= 0 )
           std::fprintf( stderr, "%s: Input file '%s' is not a regular file%s.\n",
-                        program_name, name.c_str(),
+                        program_name, name,
                         ( can_read && !to_stdout ) ?
                         " and '--stdout' was not specified" : "" );
         close( infd );
@@ -555,8 +558,8 @@ int main( const int argc, const char * const argv[] )
       case 'm': encoder_options.match_len_limit =
                   getnum( arg, LZ_min_match_len_limit(),
                                LZ_max_match_len_limit() ); break;
-      case 'o': default_output_filename = arg; break;
       case 'n': num_workers = getnum( arg, 1, max_workers ); break;
+      case 'o': default_output_filename = arg; break;
       case 'q': verbosity = -1; break;
       case 's': encoder_options.dictionary_size = get_dict_size( arg );
                 break;
@@ -633,7 +636,7 @@ int main( const int argc, const char * const argv[] )
       {
       input_filename = filenames[i];
       const int eindex = extension_index( input_filename );
-      infd = open_instream( input_filename, &in_stats, program_mode,
+      infd = open_instream( input_filename.c_str(), &in_stats, program_mode,
                             eindex, recompress, to_stdout );
       if( infd < 0 ) { if( retval < 1 ) retval = 1; continue; }
       if( program_mode != m_test )
diff --git a/testsuite/check.sh b/testsuite/check.sh
index a044738..031fe00 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -27,6 +27,15 @@ fail=0
 
 printf "testing plzip-%s..." "$2"
 
+"${LZIP}" -cqs-1 in > /dev/null
+if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
+"${LZIP}" -cqs0 in > /dev/null
+if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
+"${LZIP}" -cqs4095 in > /dev/null
+if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
+"${LZIP}" -cqm274 in > /dev/null
+if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
+
 "${LZIP}" -t "${in_lz}" || fail=1
 "${LZIP}" -cd "${in_lz}" > copy || fail=1
 cmp in copy || fail=1
@@ -39,15 +48,6 @@ if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
 cmp in copy || fail=1
 printf .
 
-"${LZIP}" -cqs-1 in > out
-if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
-"${LZIP}" -cqs0 in > out
-if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
-"${LZIP}" -cqs4095 in > out
-if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
-"${LZIP}" -cqm274 in > out
-if [ $? != 1 ] ; then fail=1 ; printf - ; else printf . ; fi
-
 for i in s4Ki 0 1 2 3 4 5 6 7 8 9 ; do
 	"${LZIP}" -k -$i in || fail=1
 	mv -f in.lz copy.lz || fail=1