summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2019-01-06 10:08:48 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2019-01-06 10:08:48 +0000
commite7afbb1bf31fd485bcae8257be514903776bb2fc (patch)
treed822d6e371583b7bd39c6c83818a3719043bbc70
parentAdding upstream version 1.7. (diff)
downloadplzip-e7afbb1bf31fd485bcae8257be514903776bb2fc.tar.xz
plzip-e7afbb1bf31fd485bcae8257be514903776bb2fc.zip
Adding upstream version 1.8.upstream/1.8
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
-rw-r--r--ChangeLog19
-rw-r--r--INSTALL26
-rw-r--r--Makefile.in13
-rw-r--r--NEWS47
-rw-r--r--README66
-rw-r--r--arg_parser.cc2
-rw-r--r--arg_parser.h2
-rw-r--r--compress.cc28
-rwxr-xr-xconfigure25
-rw-r--r--dec_stdout.cc31
-rw-r--r--dec_stream.cc26
-rw-r--r--decompress.cc99
-rw-r--r--doc/plzip.130
-rw-r--r--doc/plzip.info166
-rw-r--r--doc/plzip.texi134
-rw-r--r--list.cc34
-rw-r--r--lzip.h47
-rw-r--r--lzip_index.cc (renamed from file_index.cc)75
-rw-r--r--lzip_index.h (renamed from file_index.h)12
-rw-r--r--main.cc137
-rwxr-xr-xtestsuite/check.sh170
21 files changed, 729 insertions, 460 deletions
diff --git a/ChangeLog b/ChangeLog
index 20d8605..cbbf413 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,18 @@
+2019-01-05 Antonio Diaz Diaz <antonio@gnu.org>
+
+ * Version 1.8 released.
+ * File_* renamed to Lzip_*.
+ * main.cc: Added new options '--in-slots' and '--out-slots'.
+ * main.cc: Increased default in_slots per worker from 2 to 4.
+ * main.cc: Increased default out_slots per worker from 32 to 64.
+ * lzip.h (Lzip_trailer): New function 'verify_consistency'.
+ * lzip_index.cc: Detect some kinds of corrupt trailers.
+ * main.cc (main): Check return value of close( infd ).
+ * plzip.texi: Improved description of '-0..-9', '-m' and '-s'.
+ * configure: Added new option '--with-mingw'.
+ * configure: Accept appending to CXXFLAGS, 'CXXFLAGS+=OPTIONS'.
+ * INSTALL: Document use of CXXFLAGS+='-D __USE_MINGW_ANSI_STDIO'.
+
2018-02-07 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.7 released.
@@ -25,7 +40,7 @@
* The option '-l, --list' has been ported from lziprecover.
* Don't allow mixing different operations (-d, -l or -t).
* main.cc: Continue testing if any input file is a terminal.
- * file_index.cc: Improve detection of bad dict and trailing data.
+ * lzip_index.cc: Improve detection of bad dict and trailing data.
* lzip.h: Unified messages for bad magic, trailing data, etc.
2016-05-14 Antonio Diaz Diaz <antonio@gnu.org>
@@ -169,7 +184,7 @@
until something better appears on the net.
-Copyright (C) 2009-2018 Antonio Diaz Diaz.
+Copyright (C) 2009-2019 Antonio Diaz Diaz.
This file is a collection of facts, and thus it is not copyrightable,
but just in case, you have unlimited permission to copy, distribute and
diff --git a/INSTALL b/INSTALL
index 6f359ca..fb86f55 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,15 +1,18 @@
Requirements
------------
You will need a C++ compiler and the lzlib compression library installed.
-I use gcc 5.3.0 and 4.1.2, but the code should compile with any
-standards compliant compiler.
-Lzlib must be version 1.0 or newer, but the fast encoder is only
-available in lzlib 1.7 or newer, and the HD = 3 detection of corrupt
-headers on non-seekable multimember files is only available in lzlib
-1.10 or newer.
+I use gcc 5.3.0 and 4.1.2, but the code should compile with any standards
+compliant compiler.
+Lzlib must be version 1.0 or newer, but the fast encoder is only available
+in lzlib 1.7 or newer, and the HD = 3 detection of corrupt headers on
+non-seekable multimember files is only available in lzlib 1.10 or newer.
Gcc is available at http://gcc.gnu.org.
Lzlib is available at http://www.nongnu.org/lzip/lzlib.html.
+The operating system must allow signal handlers read access to objects with
+static storage duration so that the cleanup handler for Control-C can delete
+the partial output file.
+
Procedure
---------
@@ -28,6 +31,15 @@ the main archive.
cd plzip[version]
./configure
+ To link against a lzlib not installed in a standard place, use:
+
+ ./configure CPPFLAGS='-I<dir_of_lzlib.h>' LDFLAGS='-L<dir_of_liblz.a>'
+
+ If you are compiling on MinGW, use --with-mingw (note that the Windows
+ I/O functions used with MinGW are not guaranteed to be thread safe):
+
+ ./configure --with-mingw CXXFLAGS+='-D __USE_MINGW_ANSI_STDIO'
+
3. Run make.
make
@@ -67,7 +79,7 @@ After running 'configure', you can run 'make' and 'make install' as
explained above.
-Copyright (C) 2009-2018 Antonio Diaz Diaz.
+Copyright (C) 2009-2019 Antonio Diaz Diaz.
This file is free documentation: you have unlimited permission to copy,
distribute and modify it.
diff --git a/Makefile.in b/Makefile.in
index a9ead0a..6d40fd1 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -8,7 +8,7 @@ LIBS = -llz -lpthread
SHELL = /bin/sh
CAN_RUN_INSTALLINFO = $(SHELL) -c "install-info --version" > /dev/null 2>&1
-objs = arg_parser.o file_index.o list.o compress.o dec_stdout.o \
+objs = arg_parser.o lzip_index.o list.o compress.o dec_stdout.o \
dec_stream.o decompress.o main.o
@@ -24,6 +24,9 @@ all : $(progname)
$(progname) : $(objs)
$(CXX) $(LDFLAGS) $(CXXFLAGS) -o $@ $(objs) $(LIBS)
+decompress.o : decompress.cc
+ $(CXX) $(CPPFLAGS) $(CXXFLAGS) $(with_mingw) -c -o $@ $<
+
main.o : main.cc
$(CXX) $(CPPFLAGS) $(CXXFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
@@ -33,11 +36,11 @@ main.o : main.cc
$(objs) : Makefile
arg_parser.o : arg_parser.h
compress.o : lzip.h
-dec_stdout.o : lzip.h file_index.h
+dec_stdout.o : lzip.h lzip_index.h
dec_stream.o : lzip.h
-decompress.o : lzip.h file_index.h
-file_index.o : lzip.h file_index.h
-list.o : lzip.h file_index.h
+decompress.o : lzip.h lzip_index.h
+list.o : lzip.h lzip_index.h
+lzip_index.o : lzip.h lzip_index.h
main.o : arg_parser.h lzip.h
diff --git a/NEWS b/NEWS
index 1916e07..bfe26e6 100644
--- a/NEWS
+++ b/NEWS
@@ -1,34 +1,31 @@
-Changes in version 1.7:
+Changes in version 1.8:
-When compressing on a 32 bit system, plzip now tries to limit the memory
-use to under 2.22 GiB (4 worker threads at level -9) by reducing the
-number of threads below the system's default.
+The new options '--in-slots' and '--out-slots', setting the number of input
+and output packets buffered during streamed decompression, have been added.
+Increasing the number of packets may increase decompression speed, but
+requires more memory.
-The option '--loose-trailing', has been added.
+The default number of input packets buffered per worker thread when
+decompressing from non-seekable input has been increased from 2 to 4.
-The test used by plzip to discriminate trailing data from a corrupt
-header in multimember regular (seekable) files has been improved to a
-Hamming distance (HD) of 3, and the 3 bit flips must happen in different
-magic bytes for the test to fail. As a consequence some kinds of files
-no longer can be appended to a lzip file as trailing data unless the
-'--loose-trailing' option is used when decompressing.
-Lzlib 1.10 or newer is required for this test to work on non-seekable
-files.
-Lziprecover can be used to remove conflicting trailing data from a file.
+The default number of output packets buffered per worker thread when
+decompressing to non-seekable output has been increased from 32 to 64.
-The 'bits/byte' ratio has been replaced with the inverse compression
-ratio in the output.
+Detection of forbidden combinations of characters in trailing data has been
+improved.
-The progress of decompression is now shown at verbosity level 2 (-vv) or
-higher.
+Errors are now also checked when closing the input file.
-Progress of (de)compression is only shown if stderr is a terminal.
+The descriptions of '-0..-9', '-m' and '-s' in the manual have been
+improved.
-A second '.lz' extension is no longer added to the argument of '-o' if
-it already ends in '.lz' or '.tlz'.
+The configure script now accepts the option '--with-mingw' to enable the
+compilation of plzip under MS Windows (with the MinGW compiler). Use with
+care. The Windows I/O functions used are not guaranteed to be thread safe.
+(Code based on a patch by Hannes Domani).
-The dictionary size is now shown at verbosity level 4 (-vvvv) when
-decompressing or testing.
+The configure script now accepts appending options to CXXFLAGS using the
+syntax 'CXXFLAGS+=OPTIONS'.
-The new chapter "Meaning of plzip's output", and a block diagram of
-plzip have been added to the manual.
+It has been documented in INSTALL the use of
+CXXFLAGS+='-D __USE_MINGW_ANSI_STDIO' when compiling on MinGW.
diff --git a/README b/README
index d6f4d4a..695aa6c 100644
--- a/README
+++ b/README
@@ -1,8 +1,15 @@
Description
-Plzip is a massively parallel (multi-threaded) lossless data compressor
-based on the lzlib compression library, with a user interface similar to
-the one of lzip, bzip2 or gzip.
+Plzip is a massively parallel (multi-threaded) implementation of lzip, fully
+compatible with lzip 1.4 or newer. Plzip uses the lzlib compression library.
+
+Lzip is a lossless data compressor with a user interface similar to the
+one of gzip or bzip2. Lzip can compress about as fast as gzip (lzip -0)
+or compress most files more than bzip2 (lzip -9). Decompression speed is
+intermediate between gzip and bzip2. Lzip is better than gzip and bzip2
+from a data recovery perspective. Lzip has been designed, written and
+tested with great care to replace gzip and bzip2 as the standard
+general-purpose compressed format for unix-like systems.
Plzip can compress/decompress large files on multiprocessor machines
much faster than lzip, at the cost of a slightly reduced compression
@@ -21,25 +28,21 @@ be decompressed faster than using lzip (unless the '-b' option was used)
because lzip usually produces single-member files, which can't be
decompressed in parallel.
-Plzip uses the lzip file format; the files produced by plzip are fully
-compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
-
-The lzip file format is designed for data sharing and long-term
-archiving, taking into account both data integrity and decoder
-availability:
+The lzip file format is designed for data sharing and long-term archiving,
+taking into account both data integrity and decoder availability:
* The lzip format provides very safe integrity checking and some data
- recovery means. The lziprecover program can repair bit-flip errors
+ recovery means. The lziprecover program can repair bit flip errors
(one of the most common forms of data corruption) in lzip files,
and provides data recovery capabilities, including error-checked
merging of damaged copies of a file.
* The lzip format is as simple as possible (but not simpler). The
- lzip manual provides the source code of a simple decompressor along
- with a detailed explanation of how it works, so that with the only
- help of the lzip manual it would be possible for a digital
- archaeologist to extract the data from a lzip file long after
- quantum computers eventually render LZMA obsolete.
+ lzip manual provides the source code of a simple decompressor
+ along with a detailed explanation of how it works, so that with
+ the only help of the lzip manual it would be possible for a
+ digital archaeologist to extract the data from a lzip file long
+ after quantum computers eventually render LZMA obsolete.
* Additionally the lzip reference implementation is copylefted, which
guarantees that it will remain free forever.
@@ -49,15 +52,14 @@ repair the nearer it is from the beginning of the file. Therefore, with
the help of lziprecover, losing an entire archive just because of a
corrupt byte near the beginning is a thing of the past.
-Plzip uses the same well-defined exit status values used by lzip and
-bzip2, which makes it safer than compressors returning ambiguous warning
-values (like gzip) when it is used as a back end for other programs like
-tar or zutils.
+Plzip uses the same well-defined exit status values used by lzip, which
+makes it safer than compressors returning ambiguous warning values (like
+gzip) when it is used as a back end for other programs like tar or zutils.
-Plzip will automatically use the smallest possible dictionary size for
-each file without exceeding the given limit. Keep in mind that the
-decompression memory requirement is affected at compression time by the
-choice of dictionary size limit.
+Plzip will automatically use for each file the largest dictionary size
+that does not exceed neither the file size nor the limit given. Keep in
+mind that the decompression memory requirement is affected at
+compression time by the choice of dictionary size limit.
When compressing, plzip replaces every file given in the command line
with a compressed version of itself, with the name "original_name.lz".
@@ -70,25 +72,29 @@ anyothername becomes anyothername.out
(De)compressing a file is much like copying or moving it; therefore plzip
preserves the access and modification dates, permissions, and, when
-possible, ownership of the file just as "cp -p" does. (If the user ID or
+possible, ownership of the file just as 'cp -p' does. (If the user ID or
the group ID can't be duplicated, the file permission bits S_ISUID and
S_ISGID are cleared).
Plzip is able to read from some types of non regular files if the
-"--stdout" option is specified.
+'--stdout' option is specified.
If no file names are specified, plzip compresses (or decompresses) from
standard input to standard output. In this case, plzip will decline to
write compressed output to a terminal, as this would be entirely
incomprehensible and therefore pointless.
-Plzip will correctly decompress a file which is the concatenation of two
-or more compressed files. The result is the concatenation of the
-corresponding decompressed files. Integrity testing of concatenated
-compressed files is also supported.
+Plzip will correctly decompress a file which is the concatenation of two or
+more compressed files. The result is the concatenation of the corresponding
+decompressed files. Integrity testing of concatenated compressed files is
+also supported.
+
+LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may never
+have been compressed. Decompressed is used to refer to data which have
+undergone the process of decompression.
-Copyright (C) 2009-2018 Antonio Diaz Diaz.
+Copyright (C) 2009-2019 Antonio Diaz Diaz.
This file is free documentation: you have unlimited permission to copy,
distribute and modify it.
diff --git a/arg_parser.cc b/arg_parser.cc
index 008ebc8..ea32fde 100644
--- a/arg_parser.cc
+++ b/arg_parser.cc
@@ -1,5 +1,5 @@
/* Arg_parser - POSIX/GNU command line argument parser. (C++ version)
- Copyright (C) 2006-2018 Antonio Diaz Diaz.
+ Copyright (C) 2006-2019 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/arg_parser.h b/arg_parser.h
index f015881..ceb9933 100644
--- a/arg_parser.h
+++ b/arg_parser.h
@@ -1,5 +1,5 @@
/* Arg_parser - POSIX/GNU command line argument parser. (C++ version)
- Copyright (C) 2006-2018 Antonio Diaz Diaz.
+ Copyright (C) 2006-2019 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/compress.cc b/compress.cc
index beae59e..af36f95 100644
--- a/compress.cc
+++ b/compress.cc
@@ -1,6 +1,6 @@
-/* Plzip - Parallel compressor compatible with lzip
+/* Plzip - Massively parallel implementation of lzip
Copyright (C) 2009 Laszlo Ersek.
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -25,7 +25,6 @@
#include <cstdio>
#include <cstdlib>
#include <cstring>
-#include <queue>
#include <string>
#include <vector>
#include <pthread.h>
@@ -196,7 +195,7 @@ public:
ocheck_counter( 0 ), owait_counter( 0 ),
receive_id( 0 ), distrib_id( 0 ), deliver_id( 0 ),
slot_tally( slots ), circular_ibuffer( slots ),
- circular_obuffer( slots, (Packet *) 0 ),
+ circular_obuffer( slots, (const Packet *) 0 ),
num_working( workers ), num_slots( slots ), eof( false )
{
xinit_mutex( &imutex ); xinit_cond( &iav_or_eof );
@@ -318,7 +317,7 @@ struct Splitter_arg
// courier for packaging and distribution to workers.
extern "C" void * csplitter( void * arg )
{
- const Splitter_arg & tmp = *(Splitter_arg *)arg;
+ const Splitter_arg & tmp = *(const Splitter_arg *)arg;
Packet_courier & courier = *tmp.courier;
const Pretty_print & pp = *tmp.pp;
const int infd = tmp.infd;
@@ -364,7 +363,7 @@ struct Worker_arg
// them to courier.
extern "C" void * cworker( void * arg )
{
- const Worker_arg & tmp = *(Worker_arg *)arg;
+ const Worker_arg & tmp = *(const Worker_arg *)arg;
Packet_courier & courier = *tmp.courier;
const Pretty_print & pp = *tmp.pp;
const int dictionary_size = tmp.dictionary_size;
@@ -401,18 +400,15 @@ extern "C" void * cworker( void * arg )
int new_pos = 0;
while( true )
{
- if( LZ_compress_write_size( encoder ) > 0 )
+ if( written < packet->size )
{
- if( written < packet->size )
- {
- const int wr = LZ_compress_write( encoder,
- packet->data + offset + written,
- packet->size - written );
- if( wr < 0 ) internal_error( "library error (LZ_compress_write)." );
- written += wr;
- }
- if( written >= packet->size ) LZ_compress_finish( encoder );
+ const int wr = LZ_compress_write( encoder,
+ packet->data + offset + written,
+ packet->size - written );
+ if( wr < 0 ) internal_error( "library error (LZ_compress_write)." );
+ written += wr;
}
+ if( written >= packet->size ) LZ_compress_finish( encoder );
const int rd = LZ_compress_read( encoder, packet->data + new_pos,
offset + written - new_pos );
if( rd < 0 )
diff --git a/configure b/configure
index e31f675..c26658b 100755
--- a/configure
+++ b/configure
@@ -1,13 +1,14 @@
#! /bin/sh
-# configure script for Plzip - Parallel compressor compatible with lzip
-# Copyright (C) 2009-2018 Antonio Diaz Diaz.
+# configure script for Plzip - Massively parallel implementation of lzip
+# Copyright (C) 2009-2019 Antonio Diaz Diaz.
#
# This configure script is free software: you have unlimited permission
# to copy, distribute and modify it.
pkgname=plzip
-pkgversion=1.7
+pkgversion=1.8
progname=plzip
+with_mingw=
srctrigger=doc/${pkgname}.texi
# clear some things potentially inherited from environment.
@@ -67,9 +68,11 @@ while [ $# != 0 ] ; do
echo " --datarootdir=DIR base directory for doc and data [${datarootdir}]"
echo " --infodir=DIR info files directory [${infodir}]"
echo " --mandir=DIR man pages directory [${mandir}]"
+ echo " --with-mingw use included pread/pwrite functions missing in MinGW"
echo " CXX=COMPILER C++ compiler to use [${CXX}]"
echo " CPPFLAGS=OPTIONS command line options for the preprocessor [${CPPFLAGS}]"
echo " CXXFLAGS=OPTIONS command line options for the C++ compiler [${CXXFLAGS}]"
+ echo " CXXFLAGS+=OPTIONS append options to the current value of CXXFLAGS"
echo " LDFLAGS=OPTIONS command line options for the linker [${LDFLAGS}]"
echo
exit 0 ;;
@@ -92,11 +95,13 @@ while [ $# != 0 ] ; do
--infodir=*) infodir=${optarg} ;;
--mandir=*) mandir=${optarg} ;;
--no-create) no_create=yes ;;
+ --with-mingw) with_mingw="-DWITH_MINGW" ;;
- CXX=*) CXX=${optarg} ;;
- CPPFLAGS=*) CPPFLAGS=${optarg} ;;
- CXXFLAGS=*) CXXFLAGS=${optarg} ;;
- LDFLAGS=*) LDFLAGS=${optarg} ;;
+ CXX=*) CXX=${optarg} ;;
+ CPPFLAGS=*) CPPFLAGS=${optarg} ;;
+ CXXFLAGS=*) CXXFLAGS=${optarg} ;;
+ CXXFLAGS+=*) CXXFLAGS="${CXXFLAGS} ${optarg}" ;;
+ LDFLAGS=*) LDFLAGS=${optarg} ;;
--*)
echo "configure: WARNING: unrecognized option: '${option}'" 1>&2 ;;
@@ -154,6 +159,7 @@ EOF
fi
echo "creating Makefile"
+if [ -n "${with_mingw}" ] ; then echo "WITH_MINGW = yes" ; fi
echo "VPATH = ${srcdir}"
echo "prefix = ${prefix}"
echo "exec_prefix = ${exec_prefix}"
@@ -167,8 +173,8 @@ echo "CXXFLAGS = ${CXXFLAGS}"
echo "LDFLAGS = ${LDFLAGS}"
rm -f Makefile
cat > Makefile << EOF
-# Makefile for Plzip - Parallel compressor compatible with lzip
-# Copyright (C) 2009-2018 Antonio Diaz Diaz.
+# Makefile for Plzip - Massively parallel implementation of lzip
+# Copyright (C) 2009-2019 Antonio Diaz Diaz.
# This file was generated automatically by configure. Don't edit.
#
# This Makefile is free software: you have unlimited permission
@@ -177,6 +183,7 @@ cat > Makefile << EOF
pkgname = ${pkgname}
pkgversion = ${pkgversion}
progname = ${progname}
+with_mingw = ${with_mingw}
VPATH = ${srcdir}
prefix = ${prefix}
exec_prefix = ${exec_prefix}
diff --git a/dec_stdout.cc b/dec_stdout.cc
index 27b9f31..2a85009 100644
--- a/dec_stdout.cc
+++ b/dec_stdout.cc
@@ -1,6 +1,6 @@
-/* Plzip - Parallel compressor compatible with lzip
+/* Plzip - Massively parallel implementation of lzip
Copyright (C) 2009 Laszlo Ersek.
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -34,7 +34,7 @@
#include <lzlib.h>
#include "lzip.h"
-#include "file_index.h"
+#include "lzip_index.h"
namespace {
@@ -147,7 +147,7 @@ public:
struct Worker_arg
{
- const File_index * file_index;
+ const Lzip_index * lzip_index;
Packet_courier * courier;
const Pretty_print * pp;
int worker_id;
@@ -160,8 +160,8 @@ struct Worker_arg
// give the produced packets to courier.
extern "C" void * dworker_o( void * arg )
{
- const Worker_arg & tmp = *(Worker_arg *)arg;
- const File_index & file_index = *tmp.file_index;
+ const Worker_arg & tmp = *(const Worker_arg *)arg;
+ const Lzip_index & lzip_index = *tmp.lzip_index;
Packet_courier & courier = *tmp.courier;
const Pretty_print & pp = *tmp.pp;
const int worker_id = tmp.worker_id;
@@ -177,10 +177,10 @@ extern "C" void * dworker_o( void * arg )
{ pp( "Not enough memory." ); cleanup_and_fail(); }
int new_pos = 0;
- for( long i = worker_id; i < file_index.members(); i += num_workers )
+ for( long i = worker_id; i < lzip_index.members(); i += num_workers )
{
- long long member_pos = file_index.mblock( i ).pos();
- long long member_rest = file_index.mblock( i ).size();
+ long long member_pos = lzip_index.mblock( i ).pos();
+ long long member_rest = lzip_index.mblock( i ).size();
while( member_rest > 0 )
{
@@ -229,7 +229,7 @@ extern "C" void * dworker_o( void * arg )
if( rd == 0 ) break;
}
}
- show_progress( file_index.mblock( i ).size() );
+ show_progress( lzip_index.mblock( i ).size() );
}
delete[] ibuffer; delete[] new_data;
@@ -265,9 +265,8 @@ void muxer( Packet_courier & courier, const Pretty_print & pp, const int outfd )
// init the courier, then start the workers and call the muxer.
int dec_stdout( const int num_workers, const int infd, const int outfd,
const Pretty_print & pp, const int debug_level,
- const File_index & file_index )
+ const int out_slots, const Lzip_index & lzip_index )
{
- const int out_slots = 32;
Packet_courier courier( num_workers, out_slots );
Worker_arg * worker_args = new( std::nothrow ) Worker_arg[num_workers];
@@ -276,7 +275,7 @@ int dec_stdout( const int num_workers, const int infd, const int outfd,
{ pp( "Not enough memory." ); cleanup_and_fail(); }
for( int i = 0; i < num_workers; ++i )
{
- worker_args[i].file_index = &file_index;
+ worker_args[i].lzip_index = &lzip_index;
worker_args[i].courier = &courier;
worker_args[i].pp = &pp;
worker_args[i].worker_id = i;
@@ -301,9 +300,9 @@ int dec_stdout( const int num_workers, const int infd, const int outfd,
if( verbosity >= 2 )
{
- if( verbosity >= 4 ) show_header( file_index.dictionary_size( 0 ) );
- const unsigned long long in_size = file_index.cdata_size();
- const unsigned long long out_size = file_index.udata_size();
+ if( verbosity >= 4 ) show_header( lzip_index.dictionary_size( 0 ) );
+ const unsigned long long in_size = lzip_index.cdata_size();
+ const unsigned long long out_size = lzip_index.udata_size();
if( out_size == 0 || in_size == 0 )
std::fputs( "no data compressed. ", stderr );
else
diff --git a/dec_stream.cc b/dec_stream.cc
index 36a0ec0..2e1f752 100644
--- a/dec_stream.cc
+++ b/dec_stream.cc
@@ -1,6 +1,6 @@
-/* Plzip - Parallel compressor compatible with lzip
+/* Plzip - Massively parallel implementation of lzip
Copyright (C) 2009 Laszlo Ersek.
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -253,8 +253,8 @@ extern "C" void * dsplitter_s( void * arg )
Packet_courier & courier = *tmp.courier;
const Pretty_print & pp = *tmp.pp;
const int infd = tmp.infd;
- const int hsize = File_header::size;
- const int tsize = File_trailer::size;
+ const int hsize = Lzip_header::size;
+ const int tsize = Lzip_trailer::size;
const int buffer_size = max_packet_size;
const int base_buffer_size = tsize + buffer_size + hsize;
uint8_t * const base_buffer = new( std::nothrow ) uint8_t[base_buffer_size];
@@ -268,7 +268,7 @@ extern "C" void * dsplitter_s( void * arg )
if( size + hsize < min_member_size )
{ show_file_error( pp.name(), "Input file is too short." );
cleanup_and_fail( 2 ); }
- const File_header & header = *(File_header *)buffer;
+ const Lzip_header & header = *(const Lzip_header *)buffer;
if( !header.verify_magic() )
{ show_file_error( pp.name(), bad_magic_msg ); cleanup_and_fail( 2 ); }
if( !header.verify_version() )
@@ -288,11 +288,12 @@ extern "C" void * dsplitter_s( void * arg )
newpos = find_magic( buffer, newpos, size + 4 - newpos );
if( newpos <= size )
{
- const File_trailer & trailer = *(File_trailer *)(buffer + newpos - tsize);
+ const Lzip_trailer & trailer =
+ *(const Lzip_trailer *)(buffer + newpos - tsize);
const unsigned long long member_size = trailer.member_size();
if( partial_member_size + newpos - pos == member_size )
{ // header found
- const File_header & header = *(File_header *)(buffer + newpos);
+ const Lzip_header & header = *(const Lzip_header *)(buffer + newpos);
if( !header.verify_version() )
{ pp( bad_version( header.version() ) ); cleanup_and_fail( 2 ); }
const unsigned dictionary_size = header.dictionary_size();
@@ -354,7 +355,7 @@ struct Worker_arg
// if not testing, give the produced packets to courier.
extern "C" void * dworker_s( void * arg )
{
- const Worker_arg & tmp = *(Worker_arg *)arg;
+ const Worker_arg & tmp = *(const Worker_arg *)arg;
Packet_courier & courier = *tmp.courier;
const Pretty_print & pp = *tmp.pp;
const int worker_id = tmp.worker_id;
@@ -479,15 +480,14 @@ void muxer( Packet_courier & courier, const Pretty_print & pp, const int outfd )
int dec_stream( const unsigned long long cfile_size,
const int num_workers, const int infd, const int outfd,
const Pretty_print & pp, const int debug_level,
+ const int in_slots, const int out_slots,
const bool ignore_trailing, const bool loose_trailing )
{
- const int in_slots_per_worker = 2;
- const int out_slots = 32;
- const int in_slots = ( INT_MAX / num_workers >= in_slots_per_worker ) ?
- num_workers * in_slots_per_worker : INT_MAX;
+ const int total_in_slots = ( INT_MAX / num_workers >= in_slots ) ?
+ num_workers * in_slots : INT_MAX;
in_size = 0;
out_size = 0;
- Packet_courier courier( num_workers, in_slots, out_slots );
+ Packet_courier courier( num_workers, total_in_slots, out_slots );
Splitter_arg splitter_arg;
splitter_arg.cfile_size = cfile_size;
diff --git a/decompress.cc b/decompress.cc
index ed1ac21..19cb1df 100644
--- a/decompress.cc
+++ b/decompress.cc
@@ -1,6 +1,6 @@
-/* Plzip - Parallel compressor compatible with lzip
+/* Plzip - Massively parallel implementation of lzip
Copyright (C) 2009 Laszlo Ersek.
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -34,7 +34,46 @@
#include <lzlib.h>
#include "lzip.h"
-#include "file_index.h"
+#include "lzip_index.h"
+
+
+// This code is based on a patch by Hannes Domani, ssbssa@yahoo.de
+// to be able to compile plzip under MS Windows (with MINGW compiler).
+#if defined(__MSVCRT__) && defined(WITH_MINGW)
+#include <windows.h>
+#warning "Parallel I/O is not guaranteed to work on Windows."
+
+ssize_t pread( int fd, void *buf, size_t count, uint64_t offset )
+ {
+ OVERLAPPED o = {0,0,0,0,0};
+ HANDLE fh = (HANDLE)_get_osfhandle(fd);
+ DWORD bytes;
+ BOOL ret;
+
+ if( fh == INVALID_HANDLE_VALUE ) { errno = EBADF; return -1; }
+ o.Offset = offset & 0xffffffff;
+ o.OffsetHigh = (offset >> 32) & 0xffffffff;
+ ret = ReadFile( fh, buf, (DWORD)count, &bytes, &o );
+ if( !ret ) { errno = EIO; return -1; }
+ return (ssize_t)bytes;
+ }
+
+ssize_t pwrite( int fd, const void *buf, size_t count, uint64_t offset )
+ {
+ OVERLAPPED o = {0,0,0,0,0};
+ HANDLE fh = (HANDLE)_get_osfhandle(fd);
+ DWORD bytes;
+ BOOL ret;
+
+ if( fh == INVALID_HANDLE_VALUE ) { errno = EBADF; return -1; }
+ o.Offset = offset & 0xffffffff;
+ o.OffsetHigh = (offset >> 32) & 0xffffffff;
+ ret = WriteFile(fh, buf, (DWORD)count, &bytes, &o);
+ if( !ret ) { errno = EIO; return -1; }
+ return (ssize_t)bytes;
+ }
+
+#endif // __MSVCRT__
// Returns the number of bytes really read.
@@ -95,7 +134,7 @@ namespace {
struct Worker_arg
{
- const File_index * file_index;
+ const Lzip_index * lzip_index;
const Pretty_print * pp;
int worker_id;
int num_workers;
@@ -108,8 +147,8 @@ struct Worker_arg
// write the produced data to file.
extern "C" void * dworker( void * arg )
{
- const Worker_arg & tmp = *(Worker_arg *)arg;
- const File_index & file_index = *tmp.file_index;
+ const Worker_arg & tmp = *(const Worker_arg *)arg;
+ const Lzip_index & lzip_index = *tmp.lzip_index;
const Pretty_print & pp = *tmp.pp;
const int worker_id = tmp.worker_id;
const int num_workers = tmp.num_workers;
@@ -124,12 +163,12 @@ extern "C" void * dworker( void * arg )
LZ_decompress_errno( decoder ) != LZ_ok )
{ pp( "Not enough memory." ); cleanup_and_fail(); }
- for( long i = worker_id; i < file_index.members(); i += num_workers )
+ for( long i = worker_id; i < lzip_index.members(); i += num_workers )
{
- long long data_pos = file_index.dblock( i ).pos();
- long long data_rest = file_index.dblock( i ).size();
- long long member_pos = file_index.mblock( i ).pos();
- long long member_rest = file_index.mblock( i ).size();
+ long long data_pos = lzip_index.dblock( i ).pos();
+ long long data_rest = lzip_index.dblock( i ).size();
+ long long member_pos = lzip_index.mblock( i ).pos();
+ long long member_rest = lzip_index.mblock( i ).size();
while( member_rest > 0 )
{
@@ -180,7 +219,7 @@ extern "C" void * dworker( void * arg )
if( rd == 0 ) break;
}
}
- show_progress( file_index.mblock( i ).size() );
+ show_progress( lzip_index.mblock( i ).size() );
}
delete[] obuffer; delete[] ibuffer;
@@ -197,26 +236,27 @@ extern "C" void * dworker( void * arg )
// start the workers and wait for them to finish.
int decompress( const unsigned long long cfile_size, int num_workers,
const int infd, const int outfd, const Pretty_print & pp,
- const int debug_level, const bool ignore_trailing,
+ const int debug_level, const int in_slots,
+ const int out_slots, const bool ignore_trailing,
const bool loose_trailing, const bool infd_isreg )
{
if( !infd_isreg )
- return dec_stream( cfile_size, num_workers, infd, outfd, pp,
- debug_level, ignore_trailing, loose_trailing );
+ return dec_stream( cfile_size, num_workers, infd, outfd, pp, debug_level,
+ in_slots, out_slots, ignore_trailing, loose_trailing );
- const File_index file_index( infd, ignore_trailing, loose_trailing );
- if( file_index.retval() == 1 )
+ const Lzip_index lzip_index( infd, ignore_trailing, loose_trailing );
+ if( lzip_index.retval() == 1 )
{
lseek( infd, 0, SEEK_SET );
- return dec_stream( cfile_size, num_workers, infd, outfd, pp,
- debug_level, ignore_trailing, loose_trailing );
+ return dec_stream( cfile_size, num_workers, infd, outfd, pp, debug_level,
+ in_slots, out_slots, ignore_trailing, loose_trailing );
}
- if( file_index.retval() != 0 )
- { show_file_error( pp.name(), file_index.error().c_str() );
- return file_index.retval(); }
+ if( lzip_index.retval() != 0 )
+ { show_file_error( pp.name(), lzip_index.error().c_str() );
+ return lzip_index.retval(); }
- if( num_workers > file_index.members() )
- num_workers = file_index.members();
+ if( num_workers > lzip_index.members() )
+ num_workers = lzip_index.members();
if( verbosity >= 1 ) pp();
show_progress( 0, cfile_size, &pp ); // init
@@ -225,7 +265,8 @@ int decompress( const unsigned long long cfile_size, int num_workers,
struct stat st;
if( fstat( outfd, &st ) != 0 || !S_ISREG( st.st_mode ) ||
lseek( outfd, 0, SEEK_CUR ) < 0 )
- return dec_stdout( num_workers, infd, outfd, pp, debug_level, file_index );
+ return dec_stdout( num_workers, infd, outfd, pp, debug_level, out_slots,
+ lzip_index );
}
Worker_arg * worker_args = new( std::nothrow ) Worker_arg[num_workers];
@@ -234,7 +275,7 @@ int decompress( const unsigned long long cfile_size, int num_workers,
{ pp( "Not enough memory." ); cleanup_and_fail(); }
for( int i = 0; i < num_workers; ++i )
{
- worker_args[i].file_index = &file_index;
+ worker_args[i].lzip_index = &lzip_index;
worker_args[i].pp = &pp;
worker_args[i].worker_id = i;
worker_args[i].num_workers = num_workers;
@@ -257,9 +298,9 @@ int decompress( const unsigned long long cfile_size, int num_workers,
if( verbosity >= 2 )
{
- if( verbosity >= 4 ) show_header( file_index.dictionary_size( 0 ) );
- const unsigned long long in_size = file_index.cdata_size();
- const unsigned long long out_size = file_index.udata_size();
+ if( verbosity >= 4 ) show_header( lzip_index.dictionary_size( 0 ) );
+ const unsigned long long in_size = lzip_index.cdata_size();
+ const unsigned long long out_size = lzip_index.udata_size();
if( out_size == 0 || in_size == 0 )
std::fputs( "no data compressed. ", stderr );
else
diff --git a/doc/plzip.1 b/doc/plzip.1
index 99dfd8b..694a99d 100644
--- a/doc/plzip.1
+++ b/doc/plzip.1
@@ -1,12 +1,28 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.1.
-.TH PLZIP "1" "February 2018" "plzip 1.7" "User Commands"
+.TH PLZIP "1" "January 2019" "plzip 1.8" "User Commands"
.SH NAME
plzip \- reduces the size of files
.SH SYNOPSIS
.B plzip
[\fI\,options\/\fR] [\fI\,files\/\fR]
.SH DESCRIPTION
-Plzip \- Parallel compressor compatible with lzip.
+Plzip is a massively parallel (multi\-threaded) implementation of lzip, fully
+compatible with lzip 1.4 or newer. Plzip uses the lzlib compression library.
+.PP
+Lzip is a lossless data compressor with a user interface similar to the
+one of gzip or bzip2. Lzip can compress about as fast as gzip (lzip \fB\-0\fR)
+or compress most files more than bzip2 (lzip \fB\-9\fR). Decompression speed is
+intermediate between gzip and bzip2. Lzip is better than gzip and bzip2
+from a data recovery perspective. Lzip has been designed, written and
+tested with great care to replace gzip and bzip2 as the standard
+general\-purpose compressed format for unix\-like systems.
+.PP
+Plzip can compress/decompress large files on multiprocessor machines
+much faster than lzip, at the cost of a slightly reduced compression
+ratio (0.4 to 2 percent larger compressed files). Note that the number
+of usable threads is limited by file size; on files larger than a few GB
+plzip can use hundreds of processors, but on files of only a few MB
+plzip is no faster than lzip.
.SH OPTIONS
.TP
\fB\-h\fR, \fB\-\-help\fR
@@ -71,6 +87,12 @@ alias for \fB\-9\fR
.TP
\fB\-\-loose\-trailing\fR
allow trailing data seeming corrupt header
+.TP
+\fB\-\-in\-slots=\fR<n>
+number of 1 MiB input packets buffered [4]
+.TP
+\fB\-\-out\-slots=\fR<n>
+number of 1 MiB output packets buffered [64]
.PP
If no file names are given, or if a file is '\-', plzip compresses or
decompresses from standard input to standard output.
@@ -95,8 +117,8 @@ Plzip home page: http://www.nongnu.org/lzip/plzip.html
.SH COPYRIGHT
Copyright \(co 2009 Laszlo Ersek.
.br
-Copyright \(co 2018 Antonio Diaz Diaz.
-Using lzlib 1.10
+Copyright \(co 2019 Antonio Diaz Diaz.
+Using lzlib 1.11
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
.br
This is free software: you are free to change and redistribute it.
diff --git a/doc/plzip.info b/doc/plzip.info
index c8d7387..2b7aa52 100644
--- a/doc/plzip.info
+++ b/doc/plzip.info
@@ -2,7 +2,7 @@ This is plzip.info, produced by makeinfo version 4.13+ from plzip.texi.
INFO-DIR-SECTION Data Compression
START-INFO-DIR-ENTRY
-* Plzip: (plzip). Parallel compressor compatible with lzip
+* Plzip: (plzip). Massively parallel implementation of lzip
END-INFO-DIR-ENTRY

@@ -11,7 +11,7 @@ File: plzip.info, Node: Top, Next: Introduction, Up: (dir)
Plzip Manual
************
-This manual is for Plzip (version 1.7, 7 February 2018).
+This manual is for Plzip (version 1.8, 5 January 2019).
* Menu:
@@ -28,7 +28,7 @@ This manual is for Plzip (version 1.7, 7 February 2018).
* Concept index:: Index of concepts
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This manual is free documentation: you have unlimited permission to
copy, distribute and modify it.
@@ -39,20 +39,25 @@ File: plzip.info, Node: Introduction, Next: Output, Prev: Top, Up: Top
1 Introduction
**************
-Plzip is a massively parallel (multi-threaded) lossless data compressor
-based on the lzlib compression library, with a user interface similar to
-the one of lzip, bzip2 or gzip.
+Plzip is a massively parallel (multi-threaded) implementation of lzip,
+fully compatible with lzip 1.4 or newer. Plzip uses the lzlib
+compression library.
+
+ Lzip is a lossless data compressor with a user interface similar to
+the one of gzip or bzip2. Lzip can compress about as fast as gzip
+(lzip -0) or compress most files more than bzip2 (lzip -9).
+Decompression speed is intermediate between gzip and bzip2. Lzip is
+better than gzip and bzip2 from a data recovery perspective. Lzip has
+been designed, written and tested with great care to replace gzip and
+bzip2 as the standard general-purpose compressed format for unix-like
+systems.
Plzip can compress/decompress large files on multiprocessor machines
much faster than lzip, at the cost of a slightly reduced compression
ratio (0.4 to 2 percent larger compressed files). Note that the number
of usable threads is limited by file size; on files larger than a few GB
plzip can use hundreds of processors, but on files of only a few MB
-plzip is no faster than lzip (*note Minimum file sizes::).
-
- Plzip uses the lzip file format; the files produced by plzip are
-fully compatible with lzip-1.4 or newer, and can be rescued with
-lziprecover.
+plzip is no faster than lzip. *Note Minimum file sizes::.
The lzip file format is designed for data sharing and long-term
archiving, taking into account both data integrity and decoder
@@ -80,15 +85,16 @@ repair the nearer it is from the beginning of the file. Therefore, with
the help of lziprecover, losing an entire archive just because of a
corrupt byte near the beginning is a thing of the past.
- Plzip uses the same well-defined exit status values used by lzip and
-bzip2, which makes it safer than compressors returning ambiguous warning
-values (like gzip) when it is used as a back end for other programs like
-tar or zutils.
+ Plzip uses the same well-defined exit status values used by lzip,
+which makes it safer than compressors returning ambiguous warning
+values (like gzip) when it is used as a back end for other programs
+like tar or zutils.
- Plzip will automatically use the smallest possible dictionary size
-for each file without exceeding the given limit. Keep in mind that the
-decompression memory requirement is affected at compression time by the
-choice of dictionary size limit (*note Memory requirements::).
+ Plzip will automatically use for each file the largest dictionary
+size that does not exceed neither the file size nor the limit given.
+Keep in mind that the decompression memory requirement is affected at
+compression time by the choice of dictionary size limit. *Note Memory
+requirements::.
When compressing, plzip replaces every file given in the command line
with a compressed version of itself, with the name "original_name.lz".
@@ -101,7 +107,7 @@ anyothername becomes anyothername.out
(De)compressing a file is much like copying or moving it; therefore
plzip preserves the access and modification dates, permissions, and,
-when possible, ownership of the file just as "cp -p" does. (If the user
+when possible, ownership of the file just as 'cp -p' does. (If the user
ID or the group ID can't be duplicated, the file permission bits
S_ISUID and S_ISGID are cleared).
@@ -188,6 +194,7 @@ command line.
'-V'
'--version'
Print the version number of plzip on the standard output and exit.
+ This version number should be included in all bug reports.
'-a'
'--trailing-error'
@@ -286,12 +293,14 @@ command line.
'-s BYTES'
'--dictionary-size=BYTES'
When compressing, set the dictionary size limit in bytes. Plzip
- will use the smallest possible dictionary size for each file
- without exceeding this limit. Valid values range from 4 KiB to
- 512 MiB. Values 12 to 29 are interpreted as powers of two, meaning
- 2^12 to 2^29 bytes. Note that dictionary sizes are quantized. If
- the specified size does not match one of the valid sizes, it will
- be rounded upwards by adding up to (BYTES / 8) to it.
+ will use for each file the largest dictionary size that does not
+ exceed neither the file size nor this limit. Valid values range
+ from 4 KiB to 512 MiB. Values 12 to 29 are interpreted as powers
+ of two, meaning 2^12 to 2^29 bytes. Dictionary sizes are quantized
+ so that they can be coded in just one byte (*note
+ coded-dict-size::). If the specified size does not match one of
+ the valid sizes, it will be rounded upwards by adding up to
+ (BYTES / 8) to it.
For maximum compression you should use a dictionary size limit as
large as possible, but keep in mind that the decompression memory
@@ -320,27 +329,32 @@ command line.
except for single-member files.
'-0 .. -9'
- Set the compression parameters (dictionary size and match length
- limit) as shown in the table below. The default compression level
- is '-6'. Note that '-9' can be much slower than '-0'. These
- options have no effect when decompressing, testing or listing.
+ Compression level. Set the compression parameters (dictionary size
+ and match length limit) as shown in the table below. The default
+ compression level is '-6', equivalent to '-s8MiB -m36'. Note that
+ '-9' can be much slower than '-0'. These options have no effect
+ when decompressing, testing or listing.
The bidimensional parameter space of LZMA can't be mapped to a
linear scale optimal for all files. If your files are large, very
repetitive, etc, you may need to use the '--dictionary-size' and
'--match-length' options directly to achieve optimal performance.
- Level Dictionary size Match length limit
- -0 64 KiB 16 bytes
- -1 1 MiB 5 bytes
- -2 1.5 MiB 6 bytes
- -3 2 MiB 8 bytes
- -4 3 MiB 12 bytes
- -5 4 MiB 20 bytes
- -6 8 MiB 36 bytes
- -7 16 MiB 68 bytes
- -8 24 MiB 132 bytes
- -9 32 MiB 273 bytes
+ If several compression levels or '-s' or '-m' options are given,
+ the last setting is used. For example '-9 -s64MiB' is equivalent
+ to '-s64MiB -m273'
+
+ Level Dictionary size (-s) Match length limit (-m)
+ -0 64 KiB 16 bytes
+ -1 1 MiB 5 bytes
+ -2 1.5 MiB 6 bytes
+ -3 2 MiB 8 bytes
+ -4 3 MiB 12 bytes
+ -5 4 MiB 20 bytes
+ -6 8 MiB 36 bytes
+ -7 16 MiB 68 bytes
+ -8 24 MiB 132 bytes
+ -9 32 MiB 273 bytes
'--fast'
'--best'
@@ -353,6 +367,18 @@ command line.
if a file triggers a "corrupt header" error and the cause is not
indeed a corrupt header.
+'--in-slots=N'
+ Number of 1 MiB input packets buffered per worker thread when
+ decompressing from non-seekable input. Increasing the number of
+ packets may increase decompression speed, but requires more
+ memory. Valid values range from 1 to 64. The default value is 4.
+
+'--out-slots=N'
+ Number of 1 MiB output packets buffered per worker thread when
+ decompressing to non-seekable output. Increasing the number of
+ packets may increase decompression speed, but requires more
+ memory. Valid values range from 1 to 1024. The default value is 64.
+
Numbers given as arguments to options may be followed by a multiplier
and an optional 'B' for "byte".
@@ -465,11 +491,11 @@ additional information before, between, or after them.
'DS (coded dictionary size, 1 byte)'
The dictionary size is calculated by taking a power of 2 (the base
- size) and substracting from it a fraction between 0/16 and 7/16 of
+ size) and subtracting from it a fraction between 0/16 and 7/16 of
the base size.
Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).
- Bits 7-5 contain the numerator of the fraction (0 to 7) to
- substract from the base size to obtain the dictionary size.
+ Bits 7-5 contain the numerator of the fraction (0 to 7) to subtract
+ from the base size to obtain the dictionary size.
Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB
Valid values for dictionary size range from 4 KiB to 512 MiB.
@@ -497,22 +523,25 @@ File: plzip.info, Node: Memory requirements, Next: Minimum file sizes, Prev:
6 Memory required to compress and decompress
********************************************
-The amount of memory required *per thread* for decompression or testing
-is approximately the following:
+The amount of memory required *per worker thread* for decompression or
+testing is approximately the following:
* For decompression of a regular (seekable) file to another regular
file, or for testing of a regular file; the dictionary size.
* For testing of a non-seekable file or of standard input; the
- dictionary size plus up to 5 MiB.
+ dictionary size plus 1 MiB plus up to the number of 1 MiB input
+ packets buffered (4 by default).
* For decompression of a regular file to a non-seekable file or to
- standard output; the dictionary size plus up to 32 MiB.
+ standard output; the dictionary size plus up to the number of 1 MiB
+ output packets buffered (64 by default).
* For decompression of a non-seekable file or of standard input; the
- dictionary size plus up to 35 MiB.
+ dictionary size plus 1 MiB plus up to the number of 1 MiB input
+ and output packets buffered (68 by default).
-The amount of memory required *per thread* for compression is
+The amount of memory required *per worker thread* for compression is
approximately the following:
* For compression at level -0; 1.5 MiB plus 3.375 times the data size
@@ -561,7 +590,7 @@ for full use of N processors at a given compression level, using the
default data size for each level:
Processors 2 4 8 16 64 256
--------------------------------------------------------------------------
+------------------------------------------------------------------
Level
-0 2 MiB 4 MiB 8 MiB 16 MiB 64 MiB 256 MiB
-1 4 MiB 8 MiB 16 MiB 32 MiB 128 MiB 512 MiB
@@ -633,7 +662,11 @@ compressed file (bugs in the system libraries, memory errors, etc).
Therefore, if the data you are going to compress are important, give the
'--keep' option to plzip and don't remove the original file until you
verify the compressed file with a command like
-'plzip -cd file.lz | cmp file -'.
+'plzip -cd file.lz | cmp file -'. Most RAM errors happening during
+compression can only be detected by comparing the compressed file with
+the original because the corruption happens before plzip compresses the
+RAM contents, resulting in a valid compressed file containing wrong
+data.
Example 1: Replace a regular file with its compressed version 'file.lz'
@@ -728,21 +761,22 @@ Concept index

Tag Table:
-Node: Top221
+Node: Top222
Node: Introduction1158
-Node: Output5134
-Node: Invoking plzip6614
-Ref: --trailing-error7177
-Ref: --data-size7420
-Node: Program design14938
-Node: File format17090
-Node: Memory requirements19522
-Node: Minimum file sizes20985
-Node: Trailing data23002
-Node: Examples25285
-Ref: concat-example26450
-Node: Problems27025
-Node: Concept index27553
+Node: Output5456
+Node: Invoking plzip6936
+Ref: --trailing-error7563
+Ref: --data-size7806
+Node: Program design16267
+Node: File format18419
+Ref: coded-dict-size19719
+Node: Memory requirements20849
+Node: Minimum file sizes22531
+Node: Trailing data24540
+Node: Examples26823
+Ref: concat-example28238
+Node: Problems28813
+Node: Concept index29341

End Tag Table
diff --git a/doc/plzip.texi b/doc/plzip.texi
index 44cff75..b5469b9 100644
--- a/doc/plzip.texi
+++ b/doc/plzip.texi
@@ -6,19 +6,19 @@
@finalout
@c %**end of header
-@set UPDATED 7 February 2018
-@set VERSION 1.7
+@set UPDATED 5 January 2019
+@set VERSION 1.8
@dircategory Data Compression
@direntry
-* Plzip: (plzip). Parallel compressor compatible with lzip
+* Plzip: (plzip). Massively parallel implementation of lzip
@end direntry
@ifnothtml
@titlepage
@title Plzip
-@subtitle Parallel compressor compatible with lzip
+@subtitle Massively parallel implementation of lzip
@subtitle for Plzip version @value{VERSION}, @value{UPDATED}
@author by Antonio Diaz Diaz
@@ -49,7 +49,7 @@ This manual is for Plzip (version @value{VERSION}, @value{UPDATED}).
@end menu
@sp 1
-Copyright @copyright{} 2009-2018 Antonio Diaz Diaz.
+Copyright @copyright{} 2009-2019 Antonio Diaz Diaz.
This manual is free documentation: you have unlimited permission
to copy, distribute and modify it.
@@ -59,23 +59,28 @@ to copy, distribute and modify it.
@chapter Introduction
@cindex introduction
-Plzip is a massively parallel (multi-threaded) lossless data compressor
-based on the lzlib compression library, with a user interface similar to
-the one of lzip, bzip2 or gzip.
+@uref{http://www.nongnu.org/lzip/plzip.html,,Plzip} is a massively parallel
+(multi-threaded) implementation of lzip, fully compatible with lzip 1.4 or
+newer. Plzip uses the lzlib compression library.
+
+@uref{http://www.nongnu.org/lzip/lzip.html,,Lzip} is a lossless data
+compressor with a user interface similar to the one of gzip or bzip2. Lzip
+can compress about as fast as gzip @w{(lzip -0)} or compress most files more
+than bzip2 @w{(lzip -9)}. Decompression speed is intermediate between gzip
+and bzip2. Lzip is better than gzip and bzip2 from a data recovery
+perspective. Lzip has been designed, written and tested with great care to
+replace gzip and bzip2 as the standard general-purpose compressed format for
+unix-like systems.
Plzip can compress/decompress large files on multiprocessor machines
much faster than lzip, at the cost of a slightly reduced compression
ratio (0.4 to 2 percent larger compressed files). Note that the number
of usable threads is limited by file size; on files larger than a few GB
plzip can use hundreds of processors, but on files of only a few MB
-plzip is no faster than lzip (@pxref{Minimum file sizes}).
-
-Plzip uses the lzip file format; the files produced by plzip are fully
-compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
+plzip is no faster than lzip. @xref{Minimum file sizes}.
-The lzip file format is designed for data sharing and long-term
-archiving, taking into account both data integrity and decoder
-availability:
+The lzip file format is designed for data sharing and long-term archiving,
+taking into account both data integrity and decoder availability:
@itemize @bullet
@item
@@ -107,15 +112,14 @@ repair the nearer it is from the beginning of the file. Therefore, with
the help of lziprecover, losing an entire archive just because of a
corrupt byte near the beginning is a thing of the past.
-Plzip uses the same well-defined exit status values used by lzip and
-bzip2, which makes it safer than compressors returning ambiguous warning
-values (like gzip) when it is used as a back end for other programs like
-tar or zutils.
+Plzip uses the same well-defined exit status values used by lzip, which
+makes it safer than compressors returning ambiguous warning values (like
+gzip) when it is used as a back end for other programs like tar or zutils.
-Plzip will automatically use the smallest possible dictionary size for
-each file without exceeding the given limit. Keep in mind that the
-decompression memory requirement is affected at compression time by the
-choice of dictionary size limit (@pxref{Memory requirements}).
+Plzip will automatically use for each file the largest dictionary size that
+does not exceed neither the file size nor the limit given. Keep in mind that
+the decompression memory requirement is affected at compression time by the
+choice of dictionary size limit. @xref{Memory requirements}.
When compressing, plzip replaces every file given in the command line
with a compressed version of itself, with the name "original_name.lz".
@@ -130,7 +134,7 @@ file from that of the compressed file as follows:
(De)compressing a file is much like copying or moving it; therefore plzip
preserves the access and modification dates, permissions, and, when
-possible, ownership of the file just as "cp -p" does. (If the user ID or
+possible, ownership of the file just as @samp{cp -p} does. (If the user ID or
the group ID can't be duplicated, the file permission bits S_ISUID and
S_ISGID are cleared).
@@ -142,10 +146,10 @@ standard input to standard output. In this case, plzip will decline to
write compressed output to a terminal, as this would be entirely
incomprehensible and therefore pointless.
-Plzip will correctly decompress a file which is the concatenation of two
-or more compressed files. The result is the concatenation of the
-corresponding decompressed files. Integrity testing of concatenated
-compressed files is also supported.
+Plzip will correctly decompress a file which is the concatenation of two or
+more compressed files. The result is the concatenation of the corresponding
+decompressed files. Integrity testing of concatenated compressed files is
+also supported.
@node Output
@@ -225,6 +229,7 @@ Print an informative help message describing the options and exit.
@item -V
@itemx --version
Print the version number of plzip on the standard output and exit.
+This version number should be included in all bug reports.
@anchor{--trailing-error}
@item -a
@@ -322,12 +327,13 @@ Quiet operation. Suppress all messages.
@item -s @var{bytes}
@itemx --dictionary-size=@var{bytes}
When compressing, set the dictionary size limit in bytes. Plzip will use
-the smallest possible dictionary size for each file without exceeding
-this limit. Valid values range from @w{4 KiB} to @w{512 MiB}. Values 12
-to 29 are interpreted as powers of two, meaning 2^12 to 2^29 bytes. Note
-that dictionary sizes are quantized. If the specified size does not
-match one of the valid sizes, it will be rounded upwards by adding up to
-@w{(@var{bytes} / 8)} to it.
+for each file the largest dictionary size that does not exceed neither
+the file size nor this limit. Valid values range from @w{4 KiB} to
+@w{512 MiB}. Values 12 to 29 are interpreted as powers of two, meaning
+2^12 to 2^29 bytes. Dictionary sizes are quantized so that they can be
+coded in just one byte (@pxref{coded-dict-size}). If the specified size
+does not match one of the valid sizes, it will be rounded upwards by
+adding up to @w{(@var{bytes} / 8)} to it.
For maximum compression you should use a dictionary size limit as large
as possible, but keep in mind that the decompression memory requirement
@@ -354,18 +360,23 @@ Two or more @samp{-v} options show the progress of (de)compression,
except for single-member files.
@item -0 .. -9
-Set the compression parameters (dictionary size and match length limit)
-as shown in the table below. The default compression level is @samp{-6}.
-Note that @samp{-9} can be much slower than @samp{-0}. These options
-have no effect when decompressing, testing or listing.
+Compression level. Set the compression parameters (dictionary size and
+match length limit) as shown in the table below. The default compression
+level is @samp{-6}, equivalent to @w{@samp{-s8MiB -m36}}. Note that
+@samp{-9} can be much slower than @samp{-0}. These options have no
+effect when decompressing, testing or listing.
The bidimensional parameter space of LZMA can't be mapped to a linear
scale optimal for all files. If your files are large, very repetitive,
etc, you may need to use the @samp{--dictionary-size} and
@samp{--match-length} options directly to achieve optimal performance.
-@multitable {Level} {Dictionary size} {Match length limit}
-@item Level @tab Dictionary size @tab Match length limit
+If several compression levels or @samp{-s} or @samp{-m} options are
+given, the last setting is used. For example @w{@samp{-9 -s64MiB}} is
+equivalent to @w{@samp{-s64MiB -m273}}
+
+@multitable {Level} {Dictionary size (-s)} {Match length limit (-m)}
+@item Level @tab Dictionary size (-s) @tab Match length limit (-m)
@item -0 @tab 64 KiB @tab 16 bytes
@item -1 @tab 1 MiB @tab 5 bytes
@item -2 @tab 1.5 MiB @tab 6 bytes
@@ -388,6 +399,18 @@ bytes are so similar to the magic bytes of a lzip header that they can
be confused with a corrupt header. Use this option if a file triggers a
"corrupt header" error and the cause is not indeed a corrupt header.
+@item --in-slots=@var{n}
+Number of @w{1 MiB} input packets buffered per worker thread when
+decompressing from non-seekable input. Increasing the number of packets
+may increase decompression speed, but requires more memory. Valid values
+range from 1 to 64. The default value is 4.
+
+@item --out-slots=@var{n}
+Number of @w{1 MiB} output packets buffered per worker thread when
+decompressing to non-seekable output. Increasing the number of packets
+may increase decompression speed, but requires more memory. Valid values
+range from 1 to 1024. The default value is 64.
+
@end table
Numbers given as arguments to options may be followed by a multiplier
@@ -506,12 +529,13 @@ A four byte string, identifying the lzip format, with the value "LZIP"
@item VN (version number, 1 byte)
Just in case something needs to be modified in the future. 1 for now.
+@anchor{coded-dict-size}
@item DS (coded dictionary size, 1 byte)
The dictionary size is calculated by taking a power of 2 (the base size)
-and substracting from it a fraction between 0/16 and 7/16 of the base
+and subtracting from it a fraction between 0/16 and 7/16 of the base
size.@*
Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).@*
-Bits 7-5 contain the numerator of the fraction (0 to 7) to substract
+Bits 7-5 contain the numerator of the fraction (0 to 7) to subtract
from the base size to obtain the dictionary size.@*
Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB@*
Valid values for dictionary size range from 4 KiB to 512 MiB.
@@ -546,8 +570,8 @@ facilitates safe recovery of undamaged members from multimember files.
@chapter Memory required to compress and decompress
@cindex memory requirements
-The amount of memory required @strong{per thread} for decompression or
-testing is approximately the following:
+The amount of memory required @strong{per worker thread} for
+decompression or testing is approximately the following:
@itemize @bullet
@item
@@ -556,20 +580,23 @@ or for testing of a regular file; the dictionary size.
@item
For testing of a non-seekable file or of standard input; the dictionary
-size plus up to @w{5 MiB}.
+size plus @w{1 MiB} plus up to the number of @w{1 MiB} input packets
+buffered (4 by default).
@item
For decompression of a regular file to a non-seekable file or to
-standard output; the dictionary size plus up to @w{32 MiB}.
+standard output; the dictionary size plus up to the number of @w{1 MiB}
+output packets buffered (64 by default).
@item
For decompression of a non-seekable file or of standard input; the
-dictionary size plus up to @w{35 MiB}.
+dictionary size plus @w{1 MiB} plus up to the number of @w{1 MiB} input
+and output packets buffered (68 by default).
@end itemize
@noindent
-The amount of memory required @strong{per thread} for compression is
-approximately the following:
+The amount of memory required @strong{per worker thread} for compression
+is approximately the following:
@itemize @bullet
@item
@@ -696,9 +723,12 @@ where a file containing trailing data must be rejected, the option
WARNING! Even if plzip is bug-free, other causes may result in a corrupt
compressed file (bugs in the system libraries, memory errors, etc).
Therefore, if the data you are going to compress are important, give the
-@samp{--keep} option to plzip and don't remove the original file until
-you verify the compressed file with a command like
-@w{@samp{plzip -cd file.lz | cmp file -}}.
+@samp{--keep} option to plzip and don't remove the original file until you
+verify the compressed file with a command like
+@w{@samp{plzip -cd file.lz | cmp file -}}. Most RAM errors happening during
+compression can only be detected by comparing the compressed file with the
+original because the corruption happens before plzip compresses the RAM
+contents, resulting in a valid compressed file containing wrong data.
@sp 1
@noindent
diff --git a/list.cc b/list.cc
index eeef1c3..d3e4908 100644
--- a/list.cc
+++ b/list.cc
@@ -1,5 +1,5 @@
-/* Plzip - Parallel compressor compatible with lzip
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+/* Plzip - Massively parallel implementation of lzip
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -27,7 +27,7 @@
#include <sys/stat.h>
#include "lzip.h"
-#include "file_index.h"
+#include "lzip_index.h"
namespace {
@@ -66,18 +66,18 @@ int list_files( const std::vector< std::string > & filenames,
open_instream( input_filename, &in_stats, true, true );
if( infd < 0 ) { if( retval < 1 ) retval = 1; continue; }
- const File_index file_index( infd, ignore_trailing, loose_trailing );
+ const Lzip_index lzip_index( infd, ignore_trailing, loose_trailing );
close( infd );
- if( file_index.retval() != 0 )
+ if( lzip_index.retval() != 0 )
{
- show_file_error( input_filename, file_index.error().c_str() );
- if( retval < file_index.retval() ) retval = file_index.retval();
+ show_file_error( input_filename, lzip_index.error().c_str() );
+ if( retval < lzip_index.retval() ) retval = lzip_index.retval();
continue;
}
if( verbosity >= 0 )
{
- const unsigned long long udata_size = file_index.udata_size();
- const unsigned long long cdata_size = file_index.cdata_size();
+ const unsigned long long udata_size = lzip_index.udata_size();
+ const unsigned long long cdata_size = lzip_index.cdata_size();
total_comp += cdata_size; total_uncomp += udata_size; ++files;
if( first_post )
{
@@ -88,22 +88,22 @@ int list_files( const std::vector< std::string > & filenames,
if( verbosity >= 1 )
{
unsigned dictionary_size = 0;
- for( long i = 0; i < file_index.members(); ++i )
+ for( long i = 0; i < lzip_index.members(); ++i )
dictionary_size =
- std::max( dictionary_size, file_index.dictionary_size( i ) );
- const long long trailing_size = file_index.file_size() - cdata_size;
+ std::max( dictionary_size, lzip_index.dictionary_size( i ) );
+ const long long trailing_size = lzip_index.file_size() - cdata_size;
std::printf( "%s %5ld %6lld ", format_ds( dictionary_size ),
- file_index.members(), trailing_size );
+ lzip_index.members(), trailing_size );
}
list_line( udata_size, cdata_size, input_filename );
- if( verbosity >= 2 && file_index.members() > 1 )
+ if( verbosity >= 2 && lzip_index.members() > 1 )
{
std::fputs( " member data_pos data_size member_pos member_size\n", stdout );
- for( long i = 0; i < file_index.members(); ++i )
+ for( long i = 0; i < lzip_index.members(); ++i )
{
- const Block & db = file_index.dblock( i );
- const Block & mb = file_index.mblock( i );
+ const Block & db = lzip_index.dblock( i );
+ const Block & mb = lzip_index.mblock( i );
std::printf( "%5ld %15llu %15llu %15llu %15llu\n",
i + 1, db.pos(), db.size(), mb.pos(), mb.size() );
}
diff --git a/lzip.h b/lzip.h
index 3587a8f..dfbf4f7 100644
--- a/lzip.h
+++ b/lzip.h
@@ -1,5 +1,5 @@
-/* Plzip - Parallel compressor compatible with lzip
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+/* Plzip - Massively parallel implementation of lzip
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -48,7 +48,7 @@ public:
{
const std::string & s = filenames[i];
const unsigned len = ( s == "-" ) ? stdin_name_len : s.size();
- if( len > longest_name ) longest_name = len;
+ if( longest_name < len ) longest_name = len;
}
if( longest_name == 0 ) longest_name = stdin_name_len;
}
@@ -58,7 +58,7 @@ public:
if( filename.size() && filename != "-" ) name_ = filename;
else name_ = stdin_name;
padded_name = " "; padded_name += name_; padded_name += ": ";
- if( name_.size() < longest_name )
+ if( longest_name > name_.size() )
padded_name.append( longest_name - name_.size(), ' ' );
first_post = true;
}
@@ -82,30 +82,30 @@ inline int real_bits( unsigned value )
}
-const uint8_t magic_string[4] = { 0x4C, 0x5A, 0x49, 0x50 }; // "LZIP"
+const uint8_t lzip_magic[4] = { 0x4C, 0x5A, 0x49, 0x50 }; // "LZIP"
-struct File_header
+struct Lzip_header
{
uint8_t data[6]; // 0-3 magic bytes
// 4 version
// 5 coded_dict_size
enum { size = 6 };
- void set_magic() { std::memcpy( data, magic_string, 4 ); data[4] = 1; }
+ void set_magic() { std::memcpy( data, lzip_magic, 4 ); data[4] = 1; }
bool verify_magic() const
- { return ( std::memcmp( data, magic_string, 4 ) == 0 ); }
+ { return ( std::memcmp( data, lzip_magic, 4 ) == 0 ); }
bool verify_prefix( const int sz ) const // detect (truncated) header
{
for( int i = 0; i < sz && i < 4; ++i )
- if( data[i] != magic_string[i] ) return false;
+ if( data[i] != lzip_magic[i] ) return false;
return ( sz > 0 );
}
bool verify_corrupt() const // detect corrupt header
{
int matches = 0;
for( int i = 0; i < 4; ++i )
- if( data[i] == magic_string[i] ) ++matches;
+ if( data[i] == lzip_magic[i] ) ++matches;
return ( matches > 1 && matches < 4 );
}
@@ -137,12 +137,11 @@ struct File_header
};
-struct File_trailer
+struct Lzip_trailer
{
uint8_t data[20]; // 0-3 CRC32 of the uncompressed data
// 4-11 size of the uncompressed data
// 12-19 member size including header and trailer
-
enum { size = 20 };
unsigned data_crc() const
@@ -174,6 +173,20 @@ struct File_trailer
void member_size( unsigned long long sz )
{ for( int i = 12; i <= 19; ++i ) { data[i] = (uint8_t)sz; sz >>= 8; } }
+
+ bool verify_consistency() const // check internal consistency
+ {
+ const unsigned crc = data_crc();
+ const unsigned long long dsize = data_size();
+ if( ( crc == 0 ) != ( dsize == 0 ) ) return false;
+ const unsigned long long msize = member_size();
+ if( msize < min_member_size ) return false;
+ const unsigned long long mlimit = ( 9 * dsize + 7 ) / 8 + min_member_size;
+ if( mlimit > dsize && msize > mlimit ) return false;
+ const unsigned long long dlimit = 7090 * ( msize - 26 ) - 1;
+ if( dlimit > msize && dsize > dlimit ) return false;
+ return true;
+ }
};
@@ -200,18 +213,19 @@ int compress( const unsigned long long cfile_size,
const int infd, const int outfd,
const Pretty_print & pp, const int debug_level );
-// defined in file_index.cc
-class File_index;
+// defined in lzip_index.cc
+class Lzip_index;
// defined in dec_stdout.cc
int dec_stdout( const int num_workers, const int infd, const int outfd,
const Pretty_print & pp, const int debug_level,
- const File_index & file_index );
+ const int out_slots, const Lzip_index & lzip_index );
// defined in dec_stream.cc
int dec_stream( const unsigned long long cfile_size,
const int num_workers, const int infd, const int outfd,
const Pretty_print & pp, const int debug_level,
+ const int in_slots, const int out_slots,
const bool ignore_trailing, const bool loose_trailing );
// defined in decompress.cc
@@ -221,7 +235,8 @@ int decompress_read_error( struct LZ_Decoder * const decoder,
const Pretty_print & pp, const int worker_id );
int decompress( const unsigned long long cfile_size, int num_workers,
const int infd, const int outfd, const Pretty_print & pp,
- const int debug_level, const bool ignore_trailing,
+ const int debug_level, const int in_slots,
+ const int out_slots, const bool ignore_trailing,
const bool loose_trailing, const bool infd_isreg );
// defined in list.cc
diff --git a/file_index.cc b/lzip_index.cc
index 8238054..d9c810c 100644
--- a/file_index.cc
+++ b/lzip_index.cc
@@ -1,5 +1,5 @@
-/* Plzip - Parallel compressor compatible with lzip
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+/* Plzip - Massively parallel implementation of lzip
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
#include <unistd.h>
#include "lzip.h"
-#include "file_index.h"
+#include "lzip_index.h"
namespace {
@@ -44,13 +44,13 @@ int seek_read( const int fd, uint8_t * const buf, const int size,
} // end namespace
-void File_index::set_errno_error( const char * const msg )
+void Lzip_index::set_errno_error( const char * const msg )
{
error_ = msg; error_ += std::strerror( errno );
retval_ = 1;
}
-void File_index::set_num_error( const char * const msg, unsigned long long num )
+void Lzip_index::set_num_error( const char * const msg, unsigned long long num )
{
char buf[80];
snprintf( buf, sizeof buf, "%s%llu", msg, num );
@@ -60,11 +60,11 @@ void File_index::set_num_error( const char * const msg, unsigned long long num )
// If successful, push last member and set pos to member header.
-bool File_index::skip_trailing_data( const int fd, long long & pos,
+bool Lzip_index::skip_trailing_data( const int fd, long long & pos,
const bool ignore_trailing, const bool loose_trailing )
{
enum { block_size = 16384,
- buffer_size = block_size + File_trailer::size - 1 + File_header::size };
+ buffer_size = block_size + Lzip_trailer::size - 1 + Lzip_header::size };
uint8_t buffer[buffer_size];
if( pos < min_member_size ) return false;
int bsize = pos % block_size; // total bytes in buffer
@@ -78,28 +78,28 @@ bool File_index::skip_trailing_data( const int fd, long long & pos,
if( seek_read( fd, buffer, rd_size, ipos ) != rd_size )
{ set_errno_error( "Error seeking member trailer: " ); return false; }
const uint8_t max_msb = ( ipos + search_size ) >> 56;
- for( int i = search_size; i >= File_trailer::size; --i )
+ for( int i = search_size; i >= Lzip_trailer::size; --i )
if( buffer[i-1] <= max_msb ) // most significant byte of member_size
{
- File_trailer & trailer =
- *(File_trailer *)( buffer + i - File_trailer::size );
+ const Lzip_trailer & trailer =
+ *(const Lzip_trailer *)( buffer + i - Lzip_trailer::size );
const unsigned long long member_size = trailer.member_size();
- if( member_size == 0 )
- { while( i > File_trailer::size && buffer[i-9] == 0 ) --i; continue; }
- if( member_size < min_member_size || member_size > ipos + i )
+ if( member_size == 0 ) // skip trailing zeros
+ { while( i > Lzip_trailer::size && buffer[i-9] == 0 ) --i; continue; }
+ if( member_size > ipos + i || !trailer.verify_consistency() )
continue;
- File_header header;
- if( seek_read( fd, header.data, File_header::size,
- ipos + i - member_size ) != File_header::size )
+ Lzip_header header;
+ if( seek_read( fd, header.data, Lzip_header::size,
+ ipos + i - member_size ) != Lzip_header::size )
{ set_errno_error( "Error reading member header: " ); return false; }
const unsigned dictionary_size = header.dictionary_size();
if( !header.verify_magic() || !header.verify_version() ||
!isvalid_ds( dictionary_size ) ) continue;
- if( (*(File_header *)( buffer + i )).verify_prefix( bsize - i ) )
+ if( (*(const Lzip_header *)( buffer + i )).verify_prefix( bsize - i ) )
{ error_ = "Last member in input file is truncated or corrupt.";
retval_ = 2; return false; }
- if( !loose_trailing && bsize - i >= File_header::size &&
- (*(File_header *)( buffer + i )).verify_corrupt() )
+ if( !loose_trailing && bsize - i >= Lzip_header::size &&
+ (*(const Lzip_header *)( buffer + i )).verify_corrupt() )
{ error_ = corrupt_mm_msg; retval_ = 2; return false; }
if( !ignore_trailing )
{ error_ = trailing_msg; retval_ = 2; return false; }
@@ -109,10 +109,10 @@ bool File_index::skip_trailing_data( const int fd, long long & pos,
return true;
}
if( ipos <= 0 )
- { set_num_error( "Member size in trailer is corrupt at pos ", pos - 8 );
+ { set_num_error( "Bad trailer at pos ", pos - Lzip_trailer::size );
return false; }
bsize = buffer_size;
- search_size = bsize - File_header::size;
+ search_size = bsize - Lzip_header::size;
rd_size = block_size;
ipos -= rd_size;
std::memcpy( buffer + rd_size, buffer, buffer_size - rd_size );
@@ -120,20 +120,20 @@ bool File_index::skip_trailing_data( const int fd, long long & pos,
}
-File_index::File_index( const int infd, const bool ignore_trailing,
+Lzip_index::Lzip_index( const int infd, const bool ignore_trailing,
const bool loose_trailing )
- : isize( lseek( infd, 0, SEEK_END ) ), retval_( 0 )
+ : insize( lseek( infd, 0, SEEK_END ) ), retval_( 0 )
{
- if( isize < 0 )
+ if( insize < 0 )
{ set_errno_error( "Input file is not seekable: " ); return; }
- if( isize < min_member_size )
+ if( insize < min_member_size )
{ error_ = "Input file is too short."; retval_ = 2; return; }
- if( isize > INT64_MAX )
+ if( insize > INT64_MAX )
{ error_ = "Input file is too long (2^63 bytes or more).";
retval_ = 2; return; }
- File_header header;
- if( seek_read( infd, header.data, File_header::size, 0 ) != File_header::size )
+ Lzip_header header;
+ if( seek_read( infd, header.data, Lzip_header::size, 0 ) != Lzip_header::size )
{ set_errno_error( "Error reading member header: " ); return; }
if( !header.verify_magic() )
{ error_ = bad_magic_msg; retval_ = 2; return; }
@@ -142,24 +142,24 @@ File_index::File_index( const int infd, const bool ignore_trailing,
if( !isvalid_ds( header.dictionary_size() ) )
{ error_ = bad_dict_msg; retval_ = 2; return; }
- long long pos = isize; // always points to a header or to EOF
+ long long pos = insize; // always points to a header or to EOF
while( pos >= min_member_size )
{
- File_trailer trailer;
- if( seek_read( infd, trailer.data, File_trailer::size,
- pos - File_trailer::size ) != File_trailer::size )
+ Lzip_trailer trailer;
+ if( seek_read( infd, trailer.data, Lzip_trailer::size,
+ pos - Lzip_trailer::size ) != Lzip_trailer::size )
{ set_errno_error( "Error reading member trailer: " ); break; }
const unsigned long long member_size = trailer.member_size();
- if( member_size < min_member_size || member_size > (unsigned long long)pos )
+ if( member_size > (unsigned long long)pos || !trailer.verify_consistency() )
{
if( member_vector.empty() )
{ if( skip_trailing_data( infd, pos, ignore_trailing, loose_trailing ) )
continue; else return; }
- set_num_error( "Member size in trailer is corrupt at pos ", pos - 8 );
+ set_num_error( "Bad trailer at pos ", pos - Lzip_trailer::size );
break;
}
- if( seek_read( infd, header.data, File_header::size,
- pos - member_size ) != File_header::size )
+ if( seek_read( infd, header.data, Lzip_header::size,
+ pos - member_size ) != Lzip_header::size )
{ set_errno_error( "Error reading member header: " ); break; }
const unsigned dictionary_size = header.dictionary_size();
if( !header.verify_magic() || !header.verify_version() ||
@@ -182,7 +182,7 @@ File_index::File_index( const int infd, const bool ignore_trailing,
return;
}
std::reverse( member_vector.begin(), member_vector.end() );
- for( unsigned long i = 0; i < member_vector.size() - 1; ++i )
+ for( unsigned long i = 0; ; ++i )
{
const long long end = member_vector[i].dblock.end();
if( end < 0 || end > INT64_MAX )
@@ -191,6 +191,7 @@ File_index::File_index( const int infd, const bool ignore_trailing,
error_ = "Data in input file is too long (2^63 bytes or more).";
retval_ = 2; return;
}
+ if( i + 1 >= member_vector.size() ) break;
member_vector[i+1].dblock.pos( end );
}
}
diff --git a/file_index.h b/lzip_index.h
index 7962b99..3775446 100644
--- a/file_index.h
+++ b/lzip_index.h
@@ -1,5 +1,5 @@
-/* Plzip - Parallel compressor compatible with lzip
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+/* Plzip - Massively parallel implementation of lzip
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -36,7 +36,7 @@ public:
};
-class File_index
+class Lzip_index
{
struct Member
{
@@ -50,7 +50,7 @@ class File_index
std::vector< Member > member_vector;
std::string error_;
- const long long isize;
+ const long long insize;
int retval_;
void set_errno_error( const char * const msg );
@@ -59,7 +59,7 @@ class File_index
const bool ignore_trailing, const bool loose_trailing );
public:
- File_index( const int infd, const bool ignore_trailing,
+ Lzip_index( const int infd, const bool ignore_trailing,
const bool loose_trailing );
long members() const { return member_vector.size(); }
@@ -76,7 +76,7 @@ public:
// total size including trailing data (if any)
long long file_size() const
- { if( isize >= 0 ) return isize; else return 0; }
+ { if( insize >= 0 ) return insize; else return 0; }
const Block & dblock( const long i ) const
{ return member_vector[i].dblock; }
diff --git a/main.cc b/main.cc
index d1f76bc..5eab9f9 100644
--- a/main.cc
+++ b/main.cc
@@ -1,6 +1,6 @@
-/* Plzip - Parallel compressor compatible with lzip
+/* Plzip - Massively parallel implementation of lzip
Copyright (C) 2009 Laszlo Ersek.
- Copyright (C) 2009-2018 Antonio Diaz Diaz.
+ Copyright (C) 2009-2019 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -40,20 +40,21 @@
#include <utime.h>
#include <sys/stat.h>
#include <lzlib.h>
-#if defined(__MSVCRT__)
+#if defined(__MSVCRT__) || defined(__OS2__)
#include <io.h>
+#if defined(__MSVCRT__)
#define fchmod(x,y) 0
#define fchown(x,y,z) 0
#define strtoull std::strtoul
#define SIGHUP SIGTERM
#define S_ISSOCK(x) 0
+#ifndef S_IRGRP
#define S_IRGRP 0
#define S_IWGRP 0
#define S_IROTH 0
#define S_IWOTH 0
#endif
-#if defined(__OS2__)
-#include <io.h>
+#endif
#endif
#include "arg_parser.h"
@@ -71,9 +72,8 @@ int verbosity = 0;
namespace {
-const char * const Program_name = "Plzip";
const char * const program_name = "plzip";
-const char * const program_year = "2018";
+const char * const program_year = "2019";
const char * invocation_name = 0;
const struct { const char * from; const char * to; } known_extensions[] = {
@@ -89,6 +89,8 @@ struct Lzma_options
enum Mode { m_compress, m_decompress, m_list, m_test };
+/* Variables used in signal handler context.
+ They are not declared volatile because the handler never returns. */
std::string output_filename;
int outfd = -1;
bool delete_output_on_interrupt = false;
@@ -96,8 +98,22 @@ bool delete_output_on_interrupt = false;
void show_help( const long num_online )
{
- std::printf( "%s - Parallel compressor compatible with lzip.\n", Program_name );
- std::printf( "\nUsage: %s [options] [files]\n", invocation_name );
+ std::printf( "Plzip is a massively parallel (multi-threaded) implementation of lzip, fully\n"
+ "compatible with lzip 1.4 or newer. Plzip uses the lzlib compression library.\n"
+ "\nLzip is a lossless data compressor with a user interface similar to the\n"
+ "one of gzip or bzip2. Lzip can compress about as fast as gzip (lzip -0)\n"
+ "or compress most files more than bzip2 (lzip -9). Decompression speed is\n"
+ "intermediate between gzip and bzip2. Lzip is better than gzip and bzip2\n"
+ "from a data recovery perspective. Lzip has been designed, written and\n"
+ "tested with great care to replace gzip and bzip2 as the standard\n"
+ "general-purpose compressed format for unix-like systems.\n"
+ "\nPlzip can compress/decompress large files on multiprocessor machines\n"
+ "much faster than lzip, at the cost of a slightly reduced compression\n"
+ "ratio (0.4 to 2 percent larger compressed files). Note that the number\n"
+ "of usable threads is limited by file size; on files larger than a few GB\n"
+ "plzip can use hundreds of processors, but on files of only a few MB\n"
+ "plzip is no faster than lzip.\n"
+ "\nUsage: %s [options] [files]\n", invocation_name );
std::printf( "\nOptions:\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n"
@@ -120,6 +136,8 @@ void show_help( const long num_online )
" --fast alias for -0\n"
" --best alias for -9\n"
" --loose-trailing allow trailing data seeming corrupt header\n"
+ " --in-slots=<n> number of 1 MiB input packets buffered [4]\n"
+ " --out-slots=<n> number of 1 MiB output packets buffered [64]\n"
, num_online );
if( verbosity >= 1 )
{
@@ -263,7 +281,7 @@ int get_dict_size( const char * const arg )
const long bits = std::strtol( arg, &tail, 0 );
if( bits >= LZ_min_dictionary_bits() &&
bits <= LZ_max_dictionary_bits() && *tail == 0 )
- return ( 1 << bits );
+ return 1 << bits;
int dictionary_size = getnum( arg, LZ_min_dictionary_size(),
LZ_max_dictionary_size() );
if( dictionary_size == 65535 ) ++dictionary_size; // no fast encoder
@@ -409,6 +427,14 @@ bool check_tty( const char * const input_filename, const int infd,
return true;
}
+
+void set_signals( void (*action)(int) )
+ {
+ std::signal( SIGHUP, action );
+ std::signal( SIGINT, action );
+ std::signal( SIGTERM, action );
+ }
+
} // end namespace
// This can be called from any thread, main thread or sub-threads alike,
@@ -420,6 +446,7 @@ void cleanup_and_fail( const int retval )
// only one thread can delete and exit
static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
+ set_signals( SIG_IGN ); // ignore signals
pthread_mutex_lock( &mutex ); // ignore errors to avoid loop
const int saved_verbosity = verbosity;
verbosity = -1; // suppress messages from other threads
@@ -440,6 +467,13 @@ void cleanup_and_fail( const int retval )
namespace {
+extern "C" void signal_handler( int )
+ {
+ show_error( "Control-C or similar caught, quitting." );
+ cleanup_and_fail( 1 );
+ }
+
+
// Set permissions, owner and times.
void close_and_set_permissions( const struct stat * const in_statsp )
{
@@ -473,21 +507,6 @@ void close_and_set_permissions( const struct stat * const in_statsp )
show_error( "Can't change output file attributes." );
}
-
-extern "C" void signal_handler( int )
- {
- show_error( "Control-C or similar caught, quitting." );
- cleanup_and_fail( 1 );
- }
-
-
-void set_signals()
- {
- std::signal( SIGHUP, signal_handler );
- std::signal( SIGINT, signal_handler );
- std::signal( SIGTERM, signal_handler );
- }
-
} // end namespace
@@ -495,11 +514,9 @@ void show_error( const char * const msg, const int errcode, const bool help )
{
if( verbosity < 0 ) return;
if( msg && msg[0] )
- {
- std::fprintf( stderr, "%s: %s", program_name, msg );
- if( errcode > 0 ) std::fprintf( stderr, ": %s", std::strerror( errcode ) );
- std::fputc( '\n', stderr );
- }
+ std::fprintf( stderr, "%s: %s%s%s\n", program_name, msg,
+ ( errcode > 0 ) ? ": " : "",
+ ( errcode > 0 ) ? std::strerror( errcode ) : "" );
if( help )
std::fprintf( stderr, "Try '%s --help' for more information.\n",
invocation_name );
@@ -509,10 +526,10 @@ void show_error( const char * const msg, const int errcode, const bool help )
void show_file_error( const char * const filename, const char * const msg,
const int errcode )
{
- if( verbosity < 0 ) return;
- std::fprintf( stderr, "%s: %s: %s", program_name, filename, msg );
- if( errcode > 0 ) std::fprintf( stderr, ": %s", std::strerror( errcode ) );
- std::fputc( '\n', stderr );
+ if( verbosity >= 0 )
+ std::fprintf( stderr, "%s: %s: %s%s%s\n", program_name, filename, msg,
+ ( errcode > 0 ) ? ": " : "",
+ ( errcode > 0 ) ? std::strerror( errcode ) : "" );
}
@@ -554,6 +571,26 @@ void show_progress( const unsigned long long packet_size,
}
+#if defined(__MSVCRT__)
+#include <windows.h>
+#define _SC_NPROCESSORS_ONLN 1
+#define _SC_THREAD_THREADS_MAX 2
+
+long sysconf( int flag )
+ {
+ if( flag == _SC_NPROCESSORS_ONLN )
+ {
+ SYSTEM_INFO si;
+ GetSystemInfo( &si );
+ return si.dwNumberOfProcessors;
+ }
+ if( flag != _SC_THREAD_THREADS_MAX ) errno = EINVAL;
+ return -1; // unlimited threads or error
+ }
+
+#endif // __MSVCRT__
+
+
int main( const int argc, const char * const argv[] )
{
/* Mapping from gzip/bzip2 style 1..9 compression modes
@@ -576,6 +613,8 @@ int main( const int argc, const char * const argv[] )
int data_size = 0;
int debug_level = 0;
int num_workers = 0; // start this many worker threads
+ int in_slots = 4;
+ int out_slots = 64;
Mode program_mode = m_compress;
bool force = false;
bool ignore_trailing = true;
@@ -589,7 +628,7 @@ int main( const int argc, const char * const argv[] )
{ show_error( "Bad library version. At least lzlib 1.0 is required." );
return 1; }
- enum { opt_dbg = 256, opt_lt };
+ enum { opt_dbg = 256, opt_in, opt_lt, opt_out };
const Arg_parser::Option options[] =
{
{ '0', "fast", Arg_parser::no },
@@ -622,7 +661,9 @@ int main( const int argc, const char * const argv[] )
{ 'v', "verbose", Arg_parser::no },
{ 'V', "version", Arg_parser::no },
{ opt_dbg, "debug", Arg_parser::yes },
+ { opt_in, "in-slots", Arg_parser::yes },
{ opt_lt, "loose-trailing", Arg_parser::no },
+ { opt_out, "out-slots", Arg_parser::yes },
{ 0 , 0, Arg_parser::no } };
const Arg_parser parser( argc, argv, options );
@@ -670,7 +711,9 @@ int main( const int argc, const char * const argv[] )
case 'v': if( verbosity < 4 ) ++verbosity; break;
case 'V': show_version(); return 0;
case opt_dbg: debug_level = getnum( arg, 0, 3 ); break;
+ case opt_in: in_slots = getnum( arg, 1, 64 ); break;
case opt_lt: loose_trailing = true; break;
+ case opt_out: out_slots = getnum( arg, 1, 1024 ); break;
default : internal_error( "uncaught option." );
}
} // end process options
@@ -707,8 +750,9 @@ int main( const int argc, const char * const argv[] )
if( num_workers <= 0 )
{
- if( sizeof (void *) <= 4 ) // use less than 2.22 GiB on 32 bit systems
+ if( program_mode == m_compress && sizeof (void *) <= 4 )
{
+ // use less than 2.22 GiB on 32 bit systems
const long long limit = ( 27LL << 25 ) + ( 11LL << 27 ); // 4 * 568 MiB
const long long mem = ( 27LL * data_size ) / 8 +
( fast ? 3LL << 19 : 11LL * encoder_options.dictionary_size );
@@ -720,10 +764,11 @@ int main( const int argc, const char * const argv[] )
if( !to_stdout && program_mode != m_test &&
( filenames_given || default_output_filename.size() ) )
- set_signals();
+ set_signals( signal_handler );
Pretty_print pp( filenames );
+ int failed_tests = 0;
int retval = 0;
bool stdin_used = false;
for( unsigned i = 0; i < filenames.size(); ++i )
@@ -798,15 +843,23 @@ int main( const int argc, const char * const argv[] )
num_workers, infd, outfd, pp, debug_level );
else
tmp = decompress( cfile_size, num_workers, infd, outfd, pp, debug_level,
- ignore_trailing, loose_trailing, infd_isreg );
+ in_slots, out_slots, ignore_trailing, loose_trailing,
+ infd_isreg );
+ if( close( infd ) != 0 )
+ {
+ show_error( input_filename.size() ? "Error closing input file" :
+ "Error closing stdin", errno );
+ if( tmp < 1 ) tmp = 1;
+ }
if( tmp > retval ) retval = tmp;
- if( tmp && program_mode != m_test ) cleanup_and_fail( retval );
+ if( tmp )
+ { if( program_mode != m_test ) cleanup_and_fail( retval );
+ else ++failed_tests; }
if( delete_output_on_interrupt )
close_and_set_permissions( in_statsp );
if( input_filename.size() )
{
- close( infd );
if( !keep_input_files && !to_stdout && program_mode != m_test )
std::remove( input_filename.c_str() );
}
@@ -816,5 +869,9 @@ int main( const int argc, const char * const argv[] )
show_error( "Error closing stdout", errno );
if( retval < 1 ) retval = 1;
}
+ if( failed_tests > 0 && verbosity >= 1 && filenames.size() > 1 )
+ std::fprintf( stderr, "%s: warning: %d %s failed the test.\n",
+ program_name, failed_tests,
+ ( failed_tests == 1 ) ? "file" : "files" );
return retval;
}
diff --git a/testsuite/check.sh b/testsuite/check.sh
index a4113c3..59fe3f5 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -1,6 +1,6 @@
#! /bin/sh
-# check script for Plzip - Parallel compressor compatible with lzip
-# Copyright (C) 2009-2018 Antonio Diaz Diaz.
+# check script for Plzip - Massively parallel implementation of lzip
+# Copyright (C) 2009-2019 Antonio Diaz Diaz.
#
# This script is free software: you have unlimited permission
# to copy, distribute and modify it.
@@ -31,17 +31,28 @@ cd "${objdir}"/tmp || framework_failure
cat "${testdir}"/test.txt > in || framework_failure
in_lz="${testdir}"/test.txt.lz
fail=0
+lwarn8=0
+lwarn10=0
test_failed() { fail=1 ; printf " $1" ; [ -z "$2" ] || printf "($2)" ; }
+lzlib_1_8() { [ ${lwarn8} = 0 ] &&
+ printf "\nwarning: header truncation detection requires lzlib 1.8 or newer"
+ lwarn8=1 ; }
+lzlib_1_10() { [ ${lwarn10} = 0 ] &&
+ printf "\nwarning: header HD=3 detection requires lzlib 1.10 or newer"
+ lwarn10=1 ; }
printf "testing plzip-%s..." "$2"
"${LZIP}" -fkqm4 in
-{ [ $? = 1 ] && [ ! -e in.lz ] ; } || test_failed $LINENO
+[ $? = 1 ] || test_failed $LINENO
+[ ! -e in.lz ] || test_failed $LINENO
"${LZIP}" -fkqm274 in
-{ [ $? = 1 ] && [ ! -e in.lz ] ; } || test_failed $LINENO
+[ $? = 1 ] || test_failed $LINENO
+[ ! -e in.lz ] || test_failed $LINENO
for i in bad_size -1 0 4095 513MiB 1G 1T 1P 1E 1Z 1Y 10KB ; do
"${LZIP}" -fkqs $i in
- { [ $? = 1 ] && [ ! -e in.lz ] ; } || test_failed $LINENO $i
+ [ $? = 1 ] || test_failed $LINENO $i
+ [ ! -e in.lz ] || test_failed $LINENO $i
done
"${LZIP}" -lq in
[ $? = 2 ] || test_failed $LINENO
@@ -91,26 +102,34 @@ printf "\ntesting decompression..."
"${LZIP}" -cd "${in_lz}" > copy || test_failed $LINENO
cmp in copy || test_failed $LINENO
-rm -f copy
+rm -f copy || framework_failure
cat "${in_lz}" > copy.lz || framework_failure
"${LZIP}" -dk copy.lz || test_failed $LINENO
cmp in copy || test_failed $LINENO
printf "to be overwritten" > copy || framework_failure
"${LZIP}" -d copy.lz 2> /dev/null
[ $? = 1 ] || test_failed $LINENO
-"${LZIP}" -df copy.lz
-{ [ $? = 0 ] && [ ! -e copy.lz ] && cmp in copy ; } || test_failed $LINENO
+"${LZIP}" -df copy.lz || test_failed $LINENO
+[ ! -e copy.lz ] || test_failed $LINENO
+cmp in copy || test_failed $LINENO
+
+rm -f copy || framework_failure
+cat "${in_lz}" > copy.lz || framework_failure
+"${LZIP}" -d -S100k copy.lz || test_failed $LINENO # ignore -S
+[ ! -e copy.lz ] || test_failed $LINENO
+cmp in copy || test_failed $LINENO
printf "to be overwritten" > copy || framework_failure
"${LZIP}" -df -o copy < "${in_lz}" || test_failed $LINENO
cmp in copy || test_failed $LINENO
-rm -f copy
+rm -f copy || framework_failure
"${LZIP}" < in > anyothername || test_failed $LINENO
-"${LZIP}" -dv --output copy - anyothername - < "${in_lz}" 2> /dev/null
-{ [ $? = 0 ] && cmp in copy && cmp in anyothername.out ; } ||
+"${LZIP}" -dv --output copy - anyothername - < "${in_lz}" 2> /dev/null ||
test_failed $LINENO
-rm -f copy anyothername.out
+cmp in copy || test_failed $LINENO
+cmp in anyothername.out || test_failed $LINENO
+rm -f copy anyothername.out || framework_failure
"${LZIP}" -lq in "${in_lz}"
[ $? = 2 ] || test_failed $LINENO
@@ -121,10 +140,12 @@ rm -f copy anyothername.out
"${LZIP}" -tq nx_file.lz "${in_lz}"
[ $? = 1 ] || test_failed $LINENO
"${LZIP}" -cdq in "${in_lz}" > copy
-{ [ $? = 2 ] && cat copy in | cmp in - ; } || test_failed $LINENO
+[ $? = 2 ] || test_failed $LINENO
+cat copy in | cmp in - || test_failed $LINENO
"${LZIP}" -cdq nx_file.lz "${in_lz}" > copy
-{ [ $? = 1 ] && cmp in copy ; } || test_failed $LINENO
-rm -f copy
+[ $? = 1 ] || test_failed $LINENO
+cmp in copy || test_failed $LINENO
+rm -f copy || framework_failure
cat "${in_lz}" > copy.lz || framework_failure
for i in 1 2 3 4 5 6 7 ; do
printf "g" >> copy.lz || framework_failure
@@ -134,11 +155,15 @@ for i in 1 2 3 4 5 6 7 ; do
[ $? = 2 ] || test_failed $LINENO $i
done
"${LZIP}" -dq in copy.lz
-{ [ $? = 2 ] && [ -e copy.lz ] && [ ! -e copy ] && [ ! -e in.out ] ; } ||
- test_failed $LINENO
+[ $? = 2 ] || test_failed $LINENO
+[ -e copy.lz ] || test_failed $LINENO
+[ ! -e copy ] || test_failed $LINENO
+[ ! -e in.out ] || test_failed $LINENO
"${LZIP}" -dq nx_file.lz copy.lz
-{ [ $? = 1 ] && [ ! -e copy.lz ] && [ ! -e nx_file ] && cmp in copy ; } ||
- test_failed $LINENO
+[ $? = 1 ] || test_failed $LINENO
+[ ! -e copy.lz ] || test_failed $LINENO
+[ ! -e nx_file ] || test_failed $LINENO
+cmp in copy || test_failed $LINENO
cat in in > in2 || framework_failure
cat "${in_lz}" "${in_lz}" > in2.lz || framework_failure
@@ -155,7 +180,7 @@ cmp in2 copy2 || test_failed $LINENO
printf "\ngarbage" >> copy2.lz || framework_failure
"${LZIP}" -tvvvv copy2.lz 2> /dev/null || test_failed $LINENO
-rm -f copy2
+rm -f copy2 || framework_failure
"${LZIP}" -alq copy2.lz
[ $? = 2 ] || test_failed $LINENO
"${LZIP}" -atq copy2.lz
@@ -163,12 +188,15 @@ rm -f copy2
"${LZIP}" -atq < copy2.lz
[ $? = 2 ] || test_failed $LINENO
"${LZIP}" -adkq copy2.lz
-{ [ $? = 2 ] && [ ! -e copy2 ] ; } || test_failed $LINENO
+[ $? = 2 ] || test_failed $LINENO
+[ ! -e copy2 ] || test_failed $LINENO
"${LZIP}" -adkq -o copy2 < copy2.lz
-{ [ $? = 2 ] && [ ! -e copy2 ] ; } || test_failed $LINENO
+[ $? = 2 ] || test_failed $LINENO
+[ ! -e copy2 ] || test_failed $LINENO
printf "to be overwritten" > copy2 || framework_failure
"${LZIP}" -df copy2.lz || test_failed $LINENO
cmp in2 copy2 || test_failed $LINENO
+rm -f in2 copy2 || framework_failure
printf "\ntesting compression..."
@@ -204,24 +232,30 @@ for i in s4Ki 0 1 2 3 4 5 6 7 8 9 ; do
"${LZIP}" -df -o copy < out.lz || test_failed $LINENO $i
cmp in copy || test_failed $LINENO $i
done
+rm -f out.lz || framework_failure
cat in in in in > in4 || framework_failure
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do
+ "${LZIP}" -s4Ki -B8Ki -n$i < in4 > out4.lz || test_failed $LINENO $i
+ printf "g" >> out4.lz || framework_failure
+ "${LZIP}" -d -n$i < out4.lz > out4 || test_failed $LINENO $i
+ cmp in4 out4 || test_failed $LINENO $i
+ "${LZIP}" -d --in-slots=$i < out4.lz > out4 || test_failed $LINENO $i
+ cmp in4 out4 || test_failed $LINENO $i
+ "${LZIP}" -d --out-slots=$i < out4.lz > out4 || test_failed $LINENO $i
+ cmp in4 out4 || test_failed $LINENO $i
+
"${LZIP}" -c -s4Ki -B8Ki -n$i in4 > out4.lz || test_failed $LINENO $i
printf "g" >> out4.lz || framework_failure
- "${LZIP}" -cd -n$i out4.lz > copy4 || test_failed $LINENO $i
- cmp in4 copy4 || test_failed $LINENO $i
+ "${LZIP}" -cd -n$i out4.lz > out4 || test_failed $LINENO $i
+ cmp in4 out4 || test_failed $LINENO $i
+ "${LZIP}" -cd --out-slots=$i out4.lz > out4 || test_failed $LINENO $i
+ cmp in4 out4 || test_failed $LINENO $i
+ rm -f out4 || framework_failure
"${LZIP}" -d -n$i out4.lz || test_failed $LINENO $i
cmp in4 out4 || test_failed $LINENO $i
- rm -f out4
-done
-
-for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ; do
- "${LZIP}" -s4Ki -B8Ki -n$i < in4 > out4 || test_failed $LINENO $i
- printf "g" >> out4 || framework_failure
- "${LZIP}" -d -n$i < out4 > copy4 || test_failed $LINENO $i
- cmp in4 copy4 || test_failed $LINENO $i
done
+rm -f out4 || framework_failure
cat in in in in in in in in | "${LZIP}" -1s4Ki | "${LZIP}" -t ||
test_failed $LINENO
@@ -230,58 +264,58 @@ printf "\ntesting bad input..."
headers='LZIp LZiP LZip LzIP LzIp LziP lZIP lZIp lZiP lzIP'
body='\001\014\000\203\377\373\377\377\300\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000$\000\000\000\000\000\000\000'
-cat "${in_lz}" > in0.lz
-printf "LZIP${body}" >> in0.lz
-if "${LZIP}" -tq in0.lz ; then
+cat "${in_lz}" > int.lz
+printf "LZIP${body}" >> int.lz
+if "${LZIP}" -tq int.lz ; then
for header in ${headers} ; do
- printf "${header}${body}" > in0.lz # first member
- "${LZIP}" -lq in0.lz
+ printf "${header}${body}" > int.lz # first member
+ "${LZIP}" -lq int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -tq in0.lz
+ "${LZIP}" -tq int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -tq < in0.lz
+ "${LZIP}" -tq < int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -cdq in0.lz > /dev/null
+ "${LZIP}" -cdq int.lz > /dev/null
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -lq --loose-trailing in0.lz
+ "${LZIP}" -lq --loose-trailing int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -tq --loose-trailing in0.lz
+ "${LZIP}" -tq --loose-trailing int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -tq --loose-trailing < in0.lz
+ "${LZIP}" -tq --loose-trailing < int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -cdq --loose-trailing in0.lz > /dev/null
+ "${LZIP}" -cdq --loose-trailing int.lz > /dev/null
[ $? = 2 ] || test_failed $LINENO ${header}
- cat "${in_lz}" > in0.lz
- printf "${header}${body}" >> in0.lz # trailing data
- "${LZIP}" -lq in0.lz
+ cat "${in_lz}" > int.lz
+ printf "${header}${body}" >> int.lz # trailing data
+ "${LZIP}" -lq int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -tq in0.lz
+ "${LZIP}" -tq int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
-# "${LZIP}" -tq < in0.lz # requires lzlib-1.10
-# [ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -cdq in0.lz > /dev/null
+ "${LZIP}" -tq < int.lz
+ [ $? = 2 ] || lzlib_1_10 # requires lzlib 1.10
+ "${LZIP}" -cdq int.lz > /dev/null
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -lq --loose-trailing in0.lz
- [ $? = 0 ] || test_failed $LINENO ${header}
- "${LZIP}" -t --loose-trailing in0.lz
- [ $? = 0 ] || test_failed $LINENO ${header}
- "${LZIP}" -t --loose-trailing < in0.lz
- [ $? = 0 ] || test_failed $LINENO ${header}
- "${LZIP}" -cd --loose-trailing in0.lz > /dev/null
- [ $? = 0 ] || test_failed $LINENO ${header}
- "${LZIP}" -lq --loose-trailing --trailing-error in0.lz
+ "${LZIP}" -lq --loose-trailing int.lz ||
+ test_failed $LINENO ${header}
+ "${LZIP}" -t --loose-trailing int.lz ||
+ test_failed $LINENO ${header}
+ "${LZIP}" -t --loose-trailing < int.lz ||
+ test_failed $LINENO ${header}
+ "${LZIP}" -cd --loose-trailing int.lz > /dev/null ||
+ test_failed $LINENO ${header}
+ "${LZIP}" -lq --loose-trailing --trailing-error int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -tq --loose-trailing --trailing-error in0.lz
+ "${LZIP}" -tq --loose-trailing --trailing-error int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -tq --loose-trailing --trailing-error < in0.lz
+ "${LZIP}" -tq --loose-trailing --trailing-error < int.lz
[ $? = 2 ] || test_failed $LINENO ${header}
- "${LZIP}" -cdq --loose-trailing --trailing-error in0.lz > /dev/null
+ "${LZIP}" -cdq --loose-trailing --trailing-error int.lz > /dev/null
[ $? = 2 ] || test_failed $LINENO ${header}
done
else
printf "\nwarning: skipping header test: 'printf' does not work on your system."
fi
-rm -f in0.lz
+rm -f int.lz || framework_failure
cat "${in_lz}" "${in_lz}" "${in_lz}" > in3.lz || framework_failure
if dd if=in3.lz of=trunc.lz bs=14752 count=1 2> /dev/null &&
@@ -293,16 +327,16 @@ if dd if=in3.lz of=trunc.lz bs=14752 count=1 2> /dev/null &&
"${LZIP}" -tq trunc.lz
[ $? = 2 ] || test_failed $LINENO $i
"${LZIP}" -tq < trunc.lz
- [ $? = 2 ] || test_failed $LINENO $i
+ [ $? = 2 ] || lzlib_1_8 # requires lzlib 1.8
"${LZIP}" -cdq trunc.lz > out
[ $? = 2 ] || test_failed $LINENO $i
"${LZIP}" -dq < trunc.lz > out
- [ $? = 2 ] || test_failed $LINENO $i
+ [ $? = 2 ] || lzlib_1_8 # requires lzlib 1.8
done
else
printf "\nwarning: skipping truncation test: 'dd' does not work on your system."
fi
-rm -f in3.lz trunc.lz
+rm -f in2.lz in3.lz trunc.lz out || framework_failure
cat "${in_lz}" > ingin.lz || framework_failure
printf "g" >> ingin.lz || framework_failure
@@ -316,7 +350,7 @@ cat "${in_lz}" >> ingin.lz || framework_failure
"${LZIP}" -t < ingin.lz || test_failed $LINENO
"${LZIP}" -d < ingin.lz > copy || test_failed $LINENO
cmp in copy || test_failed $LINENO
-rm -f ingin.lz
+rm -f copy ingin.lz || framework_failure
echo
if [ ${fail} = 0 ] ; then