diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/plzip.1 | 71 | ||||
| -rw-r--r-- | doc/plzip.info | 303 | ||||
| -rw-r--r-- | doc/plzip.texinfo | 311 |
3 files changed, 685 insertions, 0 deletions
diff --git a/doc/plzip.1 b/doc/plzip.1 new file mode 100644 index 0000000..4a812c0 --- /dev/null +++ b/doc/plzip.1 @@ -0,0 +1,71 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.36. +.TH PLZIP "1" "December 2009" "Plzip 0.1" "User Commands" +.SH NAME +Plzip \- data compressor based on the LZMA algorithm +.SH SYNOPSIS +.B plzip +[\fIoptions\fR] [\fIfiles\fR] +.SH DESCRIPTION +Plzip \- A parallel version of the lzip data compressor. +.SH OPTIONS +.TP +\fB\-h\fR, \fB\-\-help\fR +display this help and exit +.TP +\fB\-V\fR, \fB\-\-version\fR +output version information and exit +.TP +\fB\-c\fR, \fB\-\-stdout\fR +send output to standard output +.TP +\fB\-d\fR, \fB\-\-decompress\fR +decompress +.TP +\fB\-n\fR, \fB\-\-threads=\fR<n> +set the number of (de)compression threads +.TP +\fB\-q\fR, \fB\-\-quiet\fR +suppress all messages +.TP +\fB\-t\fR, \fB\-\-test\fR +test compressed file integrity +.TP +\fB\-v\fR, \fB\-\-verbose\fR +be verbose (a 2nd \fB\-v\fR gives more) +.TP +\fB\-1\fR .. \fB\-9\fR +set compression level [default 6] +.TP +\fB\-\-fast\fR +alias for \fB\-1\fR +.TP +\fB\-\-best\fR +alias for \fB\-9\fR +.PP +If no file names are given, plzip compresses or decompresses +from standard input to standard output. +Numbers may be followed by a multiplier: k = kB = 10^3 = 1000, +Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc... +.SH "REPORTING BUGS" +Report bugs to lzip\-bug@nongnu.org +Lzip home page: http://www.nongnu.org/lzip/lzip.html +.SH COPYRIGHT +Copyright \(co 2009 Laszlo Ersek. +.br +Copyright \(co 2009 Antonio Diaz Diaz. +License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> +.br +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law. +.SH "SEE ALSO" +The full documentation for +.B Plzip +is maintained as a Texinfo manual. If the +.B info +and +.B Plzip +programs are properly installed at your site, the command +.IP +.B info Plzip +.PP +should give you access to the complete manual. diff --git a/doc/plzip.info b/doc/plzip.info new file mode 100644 index 0000000..68fa5fa --- /dev/null +++ b/doc/plzip.info @@ -0,0 +1,303 @@ +This is plzip.info, produced by makeinfo version 4.13 from +plzip.texinfo. + +INFO-DIR-SECTION Data Compression +START-INFO-DIR-ENTRY +* Plzip: (plzip). Parallel version of the lzip data compressor +END-INFO-DIR-ENTRY + + +File: plzip.info, Node: Top, Next: Introduction, Up: (dir) + +Plzip Manual +************ + +This manual is for Plzip (version 0.1, 5 December 2009). + +* Menu: + +* Introduction:: Purpose and features of plzip +* Invoking Plzip:: Command line interface +* File Format:: Detailed format of the compressed file +* Problems:: Reporting bugs +* Concept Index:: Index of concepts + + + Copyright (C) 2008, 2009 Antonio Diaz Diaz. + + This manual is free documentation: you have unlimited permission to +copy, distribute and modify it. + + +File: plzip.info, Node: Introduction, Next: Invoking Plzip, Prev: Top, Up: Top + +1 Introduction +************** + +Plzip is a parallel version of the lzip data compressor. Currently only +compression is performed in parallel. Parallel decompression is planned +to be implemented soon. + + Lzip is a lossless data compressor based on the LZMA algorithm, with +very safe integrity checking and a user interface similar to the one of +gzip or bzip2. Lzip decompresses almost as fast as gzip and compresses +better than bzip2, which makes it well suited for software distribution +and data archiving. + + Plzip replaces every file given in the command line with a compressed +version of itself, with the name "original_name.lz". Each compressed +file has the same modification date, permissions, and, when possible, +ownership as the corresponding original, so that these properties can be +correctly restored at decompression time. Plzip is able to read from +some types of non regular files if the `--stdout' option is specified. + + If no file names are specified, plzip compresses (or decompresses) +from standard input to standard output. In this case, plzip will +decline to write compressed output to a terminal, as this would be +entirely incomprehensible and therefore pointless. + + Plzip will correctly decompress a file which is the concatenation of +two or more compressed files. The result is the concatenation of the +corresponding uncompressed files. Integrity testing of concatenated +compressed files is also supported. + + When decompressing, plzip attempts to guess the name for the +decompressed file from that of the compressed file as follows: + +filename.lz becomes filename +filename.tlz becomes filename.tar +anyothername becomes anyothername.out + + As a self-check for your protection, plzip stores in the member +trailer the 32-bit CRC of the original data and the size of the +original data, to make sure that the decompressed version of the data +is identical to the original. This guards against corruption of the +compressed data, and against undetected bugs in plzip (hopefully very +unlikely). The chances of data corruption going undetected are +microscopic, less than one chance in 4000 million for each member +processed. Be aware, though, that the check occurs upon decompression, +so it can only tell you that something is wrong. It can't help you +recover the original uncompressed data. + + Return values: 0 for a normal exit, 1 for environmental problems +(file not found, invalid flags, I/O errors, etc), 2 to indicate a +corrupt or invalid input file, 3 for an internal consistency error (eg, +bug) which caused plzip to panic. + + +File: plzip.info, Node: Invoking Plzip, Next: File Format, Prev: Introduction, Up: Top + +2 Invoking Plzip +**************** + +The format for running plzip is: + + plzip [OPTIONS] [FILES] + + Plzip supports the following options: + +`--help' +`-h' + Print an informative help message describing the options and exit. + +`--version' +`-V' + Print the version number of plzip on the standard output and exit. + +`--stdout' +`-c' + Compress or decompress to standard output. Needed when reading + from a named pipe (fifo) or from a device. + +`--decompress' +`-d' + Decompress. + +`--force' +`-f' + Force overwrite of output file. + +`--keep' +`-k' + Keep (don't delete) input files during compression or + decompression. + +`--match-length=LENGTH' +`-m LENGTH' + Set the match length limit in bytes. Valid values range from 5 to + 273. Larger values usually give better compression ratios but + longer compression times. + +`--output=FILE' +`-o FILE' + When reading from standard input and `--stdout' has not been + specified, use `FILE' as the virtual name of the uncompressed + file. This produces a file named `FILE' when decompressing, and a + file named `FILE.lz' when compressing. + +`--quiet' +`-q' + Quiet operation. Suppress all messages. + +`--dictionary-size=SIZE' +`-s SIZE' + Set the dictionary size limit in bytes. Valid values range from + 4KiB to 512MiB. Note that dictionary sizes are quantized. If the + specified size does not match one of the valid sizes, it will be + rounded upwards. + +`--test' +`-t' + Check integrity of the specified file(s), but don't decompress + them. This really performs a trial decompression and throws away + the result. Use `-tvv' or `-tvvv' to see information about the + file. + +`--verbose' +`-v' + Verbose mode. Show the compression ratio for each file processed. + Further -v's increase the verbosity level. + +`-1 .. -9' + Set the compression parameters (dictionary size and match length + limit) as shown in the table below. Note that `-9' can be much + slower than `-1'. These options have no effect when decompressing. + + Level Dictionary size Match length limit + -1 1MiB 10 bytes + -2 1MiB 12 bytes + -3 1MiB 17 bytes + -4 2MiB 26 bytes + -5 4MiB 44 bytes + -6 8MiB 80 bytes + -7 16MiB 108 bytes + -8 16MiB 163 bytes + -9 32MiB 273 bytes + +`--fast' +`--best' + Aliases for GNU gzip compatibility. + + + + Numbers given as arguments to options may be followed by a multiplier +and an optional `B' for "byte". + + Table of SI and binary prefixes (unit multipliers): + +Prefix Value | Prefix Value +k kilobyte (10^3 = 1000) | Ki kibibyte (2^10 = 1024) +M megabyte (10^6) | Mi mebibyte (2^20) +G gigabyte (10^9) | Gi gibibyte (2^30) +T terabyte (10^12) | Ti tebibyte (2^40) +P petabyte (10^15) | Pi pebibyte (2^50) +E exabyte (10^18) | Ei exbibyte (2^60) +Z zettabyte (10^21) | Zi zebibyte (2^70) +Y yottabyte (10^24) | Yi yobibyte (2^80) + + +File: plzip.info, Node: File Format, Next: Problems, Prev: Invoking Plzip, Up: Top + +3 File Format +************* + +In the diagram below, a box like this: ++---+ +| | <-- the vertical bars might be missing ++---+ + + represents one byte; a box like this: ++==============+ +| | ++==============+ + + represents a variable number of bytes. + + + A lzip file consists of a series of "members" (compressed data sets). +The members simply appear one after another in the file, with no +additional information before, between, or after them. + + Each member has the following structure: ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +| ID string | VN | DS | Lzma stream | CRC32 | Data size | Member size | ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + All multibyte values are stored in little endian order. + +`ID string' + A four byte string, identifying the member type, with the value + "LZIP". + +`VN (version number, 1 byte)' + Just in case something needs to be modified in the future. Valid + values are 0 and 1. Version 0 files have only one member and lack + `Member size'. + +`DS (coded dictionary size, 1 byte)' + Bits 4-0 contain the base 2 logarithm of the base dictionary size. + Bits 7-5 contain the number of "wedges" to substract from the base + dictionary size to obtain the dictionary size. The size of a wedge + is (base dictionary size / 16). + Valid values for dictionary size range from 4KiB to 512MiB. + +`Lzma stream' + The lzma stream, finished by an end of stream marker. Uses default + values for encoder properties. + +`CRC32 (4 bytes)' + CRC of the uncompressed original data. + +`Data size (8 bytes)' + Size of the uncompressed original data. + +`Member size (8 bytes)' + Total size of the member, including header and trailer. This + facilitates safe recovery of undamaged members from multimember + files. + + + +File: plzip.info, Node: Problems, Next: Concept Index, Prev: File Format, Up: Top + +4 Reporting Bugs +**************** + +There are probably bugs in plzip. There are certainly errors and +omissions in this manual. If you report them, they will get fixed. If +you don't, no one will ever know about them and they will remain unfixed +for all eternity, if not longer. + + If you find a bug in plzip, please send electronic mail to +<lzip-bug@nongnu.org>. Include the version number, which you can find +by running `plzip --version'. + + +File: plzip.info, Node: Concept Index, Prev: Problems, Up: Top + +Concept Index +************* + + +* Menu: + +* bugs: Problems. (line 6) +* file format: File Format. (line 6) +* getting help: Problems. (line 6) +* introduction: Introduction. (line 6) +* invoking: Invoking Plzip. (line 6) +* options: Invoking Plzip. (line 6) +* usage: Invoking Plzip. (line 6) +* version: Invoking Plzip. (line 6) + + + +Tag Table: +Node: Top227 +Node: Introduction750 +Node: Invoking Plzip3401 +Node: File Format6746 +Node: Problems8702 +Node: Concept Index9231 + +End Tag Table diff --git a/doc/plzip.texinfo b/doc/plzip.texinfo new file mode 100644 index 0000000..78ccce5 --- /dev/null +++ b/doc/plzip.texinfo @@ -0,0 +1,311 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename plzip.info +@settitle Plzip Manual +@finalout +@c %**end of header + +@set UPDATED 5 December 2009 +@set VERSION 0.1 + +@dircategory Data Compression +@direntry +* Plzip: (plzip). Parallel version of the lzip data compressor +@end direntry + + +@titlepage +@title Plzip +@subtitle A data compressor based on the LZMA algorithm +@subtitle for Plzip version @value{VERSION}, @value{UPDATED} +@author by Antonio Diaz Diaz + +@page +@vskip 0pt plus 1filll +@end titlepage + +@contents + +@node Top +@top + +This manual is for Plzip (version @value{VERSION}, @value{UPDATED}). + +@menu +* Introduction:: Purpose and features of plzip +* Invoking Plzip:: Command line interface +* File Format:: Detailed format of the compressed file +* Problems:: Reporting bugs +* Concept Index:: Index of concepts +@end menu + +@sp 1 +Copyright @copyright{} 2008, 2009 Antonio Diaz Diaz. + +This manual is free documentation: you have unlimited permission +to copy, distribute and modify it. + + +@node Introduction +@chapter Introduction +@cindex introduction + +Plzip is a parallel version of the lzip data compressor. Currently only +compression is performed in parallel. Parallel decompression is planned +to be implemented soon. + +Lzip is a lossless data compressor based on the LZMA algorithm, with +very safe integrity checking and a user interface similar to the one of +gzip or bzip2. Lzip decompresses almost as fast as gzip and compresses +better than bzip2, which makes it well suited for software distribution +and data archiving. + +Plzip replaces every file given in the command line with a compressed +version of itself, with the name "original_name.lz". Each compressed +file has the same modification date, permissions, and, when possible, +ownership as the corresponding original, so that these properties can be +correctly restored at decompression time. Plzip is able to read from some +types of non regular files if the @samp{--stdout} option is specified. + +If no file names are specified, plzip compresses (or decompresses) from +standard input to standard output. In this case, plzip will decline to +write compressed output to a terminal, as this would be entirely +incomprehensible and therefore pointless. + +Plzip will correctly decompress a file which is the concatenation of two +or more compressed files. The result is the concatenation of the +corresponding uncompressed files. Integrity testing of concatenated +compressed files is also supported. + +When decompressing, plzip attempts to guess the name for the decompressed +file from that of the compressed file as follows: + +@multitable {anyothername} {becomes} {anyothername.out} +@item filename.lz @tab becomes @tab filename +@item filename.tlz @tab becomes @tab filename.tar +@item anyothername @tab becomes @tab anyothername.out +@end multitable + +As a self-check for your protection, plzip stores in the member trailer +the 32-bit CRC of the original data and the size of the original data, +to make sure that the decompressed version of the data is identical to +the original. This guards against corruption of the compressed data, and +against undetected bugs in plzip (hopefully very unlikely). The chances +of data corruption going undetected are microscopic, less than one +chance in 4000 million for each member processed. Be aware, though, that +the check occurs upon decompression, so it can only tell you that +something is wrong. It can't help you recover the original uncompressed +data. + +Return values: 0 for a normal exit, 1 for environmental problems (file +not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or +invalid input file, 3 for an internal consistency error (eg, bug) which +caused plzip to panic. + + +@node Invoking Plzip +@chapter Invoking Plzip +@cindex invoking +@cindex options +@cindex usage +@cindex version + +The format for running plzip is: + +@example +plzip [@var{options}] [@var{files}] +@end example + +Plzip supports the following options: + +@table @samp +@item --help +@itemx -h +Print an informative help message describing the options and exit. + +@item --version +@itemx -V +Print the version number of plzip on the standard output and exit. + +@item --stdout +@itemx -c +Compress or decompress to standard output. Needed when reading from a +named pipe (fifo) or from a device. + +@item --decompress +@itemx -d +Decompress. + +@item --force +@itemx -f +Force overwrite of output file. + +@item --keep +@itemx -k +Keep (don't delete) input files during compression or decompression. + +@item --match-length=@var{length} +@itemx -m @var{length} +Set the match length limit in bytes. Valid values range from 5 to 273. +Larger values usually give better compression ratios but longer +compression times. + +@item --output=@var{file} +@itemx -o @var{file} +When reading from standard input and @samp{--stdout} has not been +specified, use @samp{@var{file}} as the virtual name of the uncompressed +file. This produces a file named @samp{@var{file}} when decompressing, +and a file named @samp{@var{file}.lz} when compressing. + +@item --quiet +@itemx -q +Quiet operation. Suppress all messages. + +@item --dictionary-size=@var{size} +@itemx -s @var{size} +Set the dictionary size limit in bytes. Valid values range from 4KiB to +512MiB. Note that dictionary sizes are quantized. If the specified size +does not match one of the valid sizes, it will be rounded upwards. + +@item --test +@itemx -t +Check integrity of the specified file(s), but don't decompress them. +This really performs a trial decompression and throws away the result. +Use @samp{-tvv} or @samp{-tvvv} to see information about the file. + +@item --verbose +@itemx -v +Verbose mode. Show the compression ratio for each file processed. +Further -v's increase the verbosity level. + +@item -1 .. -9 +Set the compression parameters (dictionary size and match length limit) +as shown in the table below. Note that @samp{-9} can be much slower than +@samp{-1}. These options have no effect when decompressing. + +@multitable {Level} {Dictionary size} {Match length limit} +@item Level @tab Dictionary size @tab Match length limit +@item -1 @tab 1MiB @tab 10 bytes +@item -2 @tab 1MiB @tab 12 bytes +@item -3 @tab 1MiB @tab 17 bytes +@item -4 @tab 2MiB @tab 26 bytes +@item -5 @tab 4MiB @tab 44 bytes +@item -6 @tab 8MiB @tab 80 bytes +@item -7 @tab 16MiB @tab 108 bytes +@item -8 @tab 16MiB @tab 163 bytes +@item -9 @tab 32MiB @tab 273 bytes +@end multitable + +@item --fast +@itemx --best +Aliases for GNU gzip compatibility. + +@end table + +@sp 1 +Numbers given as arguments to options may be followed by a multiplier +and an optional @samp{B} for "byte". + +Table of SI and binary prefixes (unit multipliers): + +@multitable {Prefix} {kilobyte (10^3 = 1000)} {|} {Prefix} {kibibyte (2^10 = 1024)} +@item Prefix @tab Value @tab | @tab Prefix @tab Value +@item k @tab kilobyte (10^3 = 1000) @tab | @tab Ki @tab kibibyte (2^10 = 1024) +@item M @tab megabyte (10^6) @tab | @tab Mi @tab mebibyte (2^20) +@item G @tab gigabyte (10^9) @tab | @tab Gi @tab gibibyte (2^30) +@item T @tab terabyte (10^12) @tab | @tab Ti @tab tebibyte (2^40) +@item P @tab petabyte (10^15) @tab | @tab Pi @tab pebibyte (2^50) +@item E @tab exabyte (10^18) @tab | @tab Ei @tab exbibyte (2^60) +@item Z @tab zettabyte (10^21) @tab | @tab Zi @tab zebibyte (2^70) +@item Y @tab yottabyte (10^24) @tab | @tab Yi @tab yobibyte (2^80) +@end multitable + + +@node File Format +@chapter File Format +@cindex file format + +In the diagram below, a box like this: +@verbatim ++---+ +| | <-- the vertical bars might be missing ++---+ +@end verbatim + +represents one byte; a box like this: +@verbatim ++==============+ +| | ++==============+ +@end verbatim + +represents a variable number of bytes. + +@sp 1 +A lzip file consists of a series of "members" (compressed data sets). +The members simply appear one after another in the file, with no +additional information before, between, or after them. + +Each member has the following structure: +@verbatim ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +| ID string | VN | DS | Lzma stream | CRC32 | Data size | Member size | ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +@end verbatim + +All multibyte values are stored in little endian order. + +@table @samp +@item ID string +A four byte string, identifying the member type, with the value "LZIP". + +@item VN (version number, 1 byte) +Just in case something needs to be modified in the future. Valid values +are 0 and 1. Version 0 files have only one member and lack @samp{Member +size}. + +@item DS (coded dictionary size, 1 byte) +Bits 4-0 contain the base 2 logarithm of the base dictionary size.@* +Bits 7-5 contain the number of "wedges" to substract from the base +dictionary size to obtain the dictionary size. The size of a wedge is +(base dictionary size / 16).@* +Valid values for dictionary size range from 4KiB to 512MiB. + +@item Lzma stream +The lzma stream, finished by an end of stream marker. Uses default values +for encoder properties. + +@item CRC32 (4 bytes) +CRC of the uncompressed original data. + +@item Data size (8 bytes) +Size of the uncompressed original data. + +@item Member size (8 bytes) +Total size of the member, including header and trailer. This facilitates +safe recovery of undamaged members from multimember files. + +@end table + + +@node Problems +@chapter Reporting Bugs +@cindex bugs +@cindex getting help + +There are probably bugs in plzip. There are certainly errors and +omissions in this manual. If you report them, they will get fixed. If +you don't, no one will ever know about them and they will remain unfixed +for all eternity, if not longer. + +If you find a bug in plzip, please send electronic mail to +@email{lzip-bug@@nongnu.org}. Include the version number, which you can +find by running @w{@samp{plzip --version}}. + + +@node Concept Index +@unnumbered Concept Index + +@printindex cp + +@bye |