summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/plzip.15
-rw-r--r--doc/plzip.info145
-rw-r--r--doc/plzip.texi134
3 files changed, 181 insertions, 103 deletions
diff --git a/doc/plzip.1 b/doc/plzip.1
index cab69f4..9146257 100644
--- a/doc/plzip.1
+++ b/doc/plzip.1
@@ -1,5 +1,5 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.1.
-.TH PLZIP "1" "August 2014" "plzip 1.2" "User Commands"
+.TH PLZIP "1" "November 2014" "plzip 1.3-pre1" "User Commands"
.SH NAME
plzip \- reduces the size of files
.SH SYNOPSIS
@@ -70,8 +70,7 @@ Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...
The bidimensional parameter space of LZMA can't be mapped to a linear
scale optimal for all files. If your files are large, very repetitive,
etc, you may need to use the \fB\-\-match\-length\fR and \fB\-\-dictionary\-size\fR
-options directly to achieve optimal performance. For example, \fB\-9m64\fR
-usually compresses executables more (and faster) than \fB\-9\fR.
+options directly to achieve optimal performance.
.PP
Exit status: 0 for a normal exit, 1 for environmental problems (file
not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
diff --git a/doc/plzip.info b/doc/plzip.info
index f8f7e08..2e64673 100644
--- a/doc/plzip.info
+++ b/doc/plzip.info
@@ -11,7 +11,7 @@ File: plzip.info, Node: Top, Next: Introduction, Up: (dir)
Plzip Manual
************
-This manual is for Plzip (version 1.2, 29 August 2014).
+This manual is for Plzip (version 1.3-pre1, 25 November 2014).
* Menu:
@@ -19,6 +19,8 @@ This manual is for Plzip (version 1.2, 29 August 2014).
* Program design:: Internal structure of plzip
* Invoking plzip:: Command line interface
* File format:: Detailed format of the compressed file
+* Memory requirements:: Memory required to compress and decompress
+* Minimum file sizes:: Minimum file sizes required for full speed
* Problems:: Reporting bugs
* Concept index:: Index of concepts
@@ -40,16 +42,18 @@ the one of lzip, bzip2 or gzip.
Plzip can compress/decompress large files on multiprocessor machines
much faster than lzip, at the cost of a slightly reduced compression
-ratio. Note that the number of usable threads is limited by file size;
-on files larger than a few GB plzip can use hundreds of processors, but
-on files of only a few MB plzip is no faster than lzip.
+ratio (0.4 to 2 percent larger compressed files). Note that the number
+of usable threads is limited by file size; on files larger than a few GB
+plzip can use hundreds of processors, but on files of only a few MB
+plzip is no faster than lzip (*note Minimum file sizes::).
Plzip uses the lzip file format; the files produced by plzip are
fully compatible with lzip-1.4 or newer, and can be rescued with
lziprecover.
- The lzip file format is designed for long-term data archiving, taking
-into account both data integrity and decoder availability:
+ The lzip file format is designed for data sharing and long-term
+archiving, taking into account both data integrity and decoder
+availability:
* The lzip format provides very safe integrity checking and some data
recovery means. The lziprecover program can repair bit-flip errors
@@ -64,50 +68,23 @@ into account both data integrity and decoder availability:
archaeologist to extract the data from a lzip file long after
quantum computers eventually render LZMA obsolete.
- * Additionally lzip is copylefted, which guarantees that it will
- remain free forever.
+ * Additionally the lzip reference implementation is copylefted, which
+ guarantees that it will remain free forever.
A nice feature of the lzip format is that a corrupt byte is easier to
repair the nearer it is from the beginning of the file. Therefore, with
the help of lziprecover, losing an entire archive just because of a
corrupt byte near the beginning is a thing of the past.
- The member trailer stores the 32-bit CRC of the original data, the
-size of the original data and the size of the member. These values,
-together with the value remaining in the range decoder and the
-end-of-stream marker, provide a 4 factor integrity checking which
-guarantees that the decompressed version of the data is identical to
-the original. This guards against corruption of the compressed data,
-and against undetected bugs in plzip (hopefully very unlikely). The
-chances of data corruption going undetected are microscopic. Be aware,
-though, that the check occurs upon decompression, so it can only tell
-you that something is wrong. It can't help you recover the original
-uncompressed data.
-
Plzip uses the same well-defined exit status values used by lzip and
bzip2, which makes it safer than compressors returning ambiguous warning
values (like gzip) when it is used as a back end for other programs like
tar or zutils.
- The amount of memory required *per thread* is approximately the
-following:
-
- * For compression; 3 times the data size (*note --data-size::) plus
- 11 times the dictionary size.
-
- * For decompression or testing of a non-seekable file or of standard
- input; 2 times the dictionary size plus up to 32 MiB.
-
- * For decompression of a regular file to a non-seekable file or to
- standard output; the dictionary size plus up to 32 MiB.
-
- * For decompression of a regular file to another regular file, or for
- testing of a regular file; the dictionary size.
-
Plzip will automatically use the smallest possible dictionary size
for each file without exceeding the given limit. Keep in mind that the
decompression memory requirement is affected at compression time by the
-choice of dictionary size limit.
+choice of dictionary size limit (*note Memory requirements::).
When compressing, plzip replaces every file given in the command line
with a compressed version of itself, with the name "original_name.lz".
@@ -245,8 +222,8 @@ The format for running plzip is:
value.
Note that the number of usable threads is limited to
- ceil( file_size / data_size ) during compression (*note
- --data-size::), and to the number of members in the input during
+ ceil( file_size / data_size ) during compression (*note Minimum
+ file sizes::), and to the number of members in the input during
decompression.
'-o FILE'
@@ -287,8 +264,8 @@ The format for running plzip is:
When compressing, show the compression ratio for each file
processed. A second '-v' shows the progress of compression.
When decompressing or testing, further -v's (up to 4) increase the
- verbosity level, showing status, compression ratio, decompressed
- size, and compressed size.
+ verbosity level, showing status, compression ratio, dictionary
+ size, decompressed size, and compressed size.
'-1 .. -9'
Set the compression parameters (dictionary size and match length
@@ -299,8 +276,7 @@ The format for running plzip is:
linear scale optimal for all files. If your files are large, very
repetitive, etc, you may need to use the '--match-length' and
'--dictionary-size' options directly to achieve optimal
- performance. For example, '-9m64' usually compresses executables
- more (and faster) than '-9'.
+ performance.
Level Dictionary size Match length limit
-1 1 MiB 5 bytes
@@ -340,7 +316,7 @@ invalid input file, 3 for an internal consistency error (eg, bug) which
caused plzip to panic.

-File: plzip.info, Node: File format, Next: Problems, Prev: Invoking plzip, Up: Top
+File: plzip.info, Node: File format, Next: Memory requirements, Prev: Invoking plzip, Up: Top
4 File format
*************
@@ -413,9 +389,70 @@ additional information before, between, or after them.

-File: plzip.info, Node: Problems, Next: Concept index, Prev: File format, Up: Top
+File: plzip.info, Node: Memory requirements, Next: Minimum file sizes, Prev: File format, Up: Top
+
+5 Memory required to compress and decompress
+********************************************
+
+The amount of memory required *per thread* is approximately the
+following:
+
+ * For compression; 11 times the dictionary size plus 3 times the
+ data size (*note --data-size::).
+
+ * For decompression of a regular (seekable) file to another regular
+ file, or for testing of a regular file; the dictionary size. Note
+ that regular files with more than 1024 bytes of trailing garbage
+ are treated as non-seekable.
+
+ * For testing of a non-seekable file or of standard input; the
+ dictionary size plus up to 5 MiB.
+
+ * For decompression of a regular file to a non-seekable file or to
+ standard output; the dictionary size plus up to 32 MiB.
+
+ * For decompression of a non-seekable file or of standard input; the
+ dictionary size plus up to 35 MiB.
+
+
+File: plzip.info, Node: Minimum file sizes, Next: Problems, Prev: Memory requirements, Up: Top
+
+6 Minimum file sizes required for full compression speed
+********************************************************
+
+When compressing, plzip divides the input file into chunks and
+compresses as many chunks simultaneously as worker threads are chosen,
+creating a multi-member compressed file.
+
+ For this to work as expected (and roughly multiply the compression
+speed by the number of available processors), the uncompressed file
+must be at least as large as the number of worker threads times the
+chunk size (*note --data-size::). Else some processors will not get any
+data to compress, and compression will be proportionally slower. The
+maximum speed increase achievable on a given file is limited by the
+ratio (file_size / data_size).
+
+ The following table shows the minimum uncompressed file size needed
+for full use of N processors at a given compression level, using the
+default data size for each level:
+
+Processors 2 3 4 8 16 64
+-------------------------------------------------------------------------
+Level
+-1 4 MiB 6 MiB 8 MiB 16 MiB 32 MiB 128 MiB
+-2 6 MiB 9 MiB 12 MiB 24 MiB 48 MiB 192 MiB
+-3 8 MiB 12 MiB 16 MiB 32 MiB 64 MiB 256 MiB
+-4 12 MiB 18 MiB 24 MiB 48 MiB 96 MiB 384 MiB
+-5 16 MiB 24 MiB 32 MiB 64 MiB 128 MiB 512 MiB
+-6 32 MiB 48 MiB 64 MiB 128 MiB 256 MiB 1 GiB
+-7 64 MiB 96 MiB 128 MiB 256 MiB 512 MiB 2 GiB
+-8 96 MiB 144 MiB 192 MiB 384 MiB 768 MiB 3 GiB
+-9 128 MiB 192 MiB 256 MiB 512 MiB 1 GiB 4 GiB
+
+
+File: plzip.info, Node: Problems, Next: Concept index, Prev: Minimum file sizes, Up: Top
-5 Reporting bugs
+7 Reporting bugs
****************
There are probably bugs in plzip. There are certainly errors and
@@ -441,6 +478,8 @@ Concept index
* getting help: Problems. (line 6)
* introduction: Introduction. (line 6)
* invoking: Invoking plzip. (line 6)
+* memory requirements: Memory requirements. (line 6)
+* minimum file sizes: Minimum file sizes. (line 6)
* options: Invoking plzip. (line 6)
* program design: Program design. (line 6)
* usage: Invoking plzip. (line 6)
@@ -450,13 +489,15 @@ Concept index

Tag Table:
Node: Top221
-Node: Introduction847
-Node: Program design6279
-Node: Invoking plzip7868
-Ref: --data-size8313
-Node: File format13471
-Node: Problems15976
-Node: Concept index16505
+Node: Introduction994
+Node: Program design5290
+Node: Invoking plzip6879
+Ref: --data-size7324
+Node: File format12420
+Node: Memory requirements14936
+Node: Minimum file sizes15913
+Node: Problems17765
+Node: Concept index18301

End Tag Table
diff --git a/doc/plzip.texi b/doc/plzip.texi
index bc7af6d..c0cb0fd 100644
--- a/doc/plzip.texi
+++ b/doc/plzip.texi
@@ -6,8 +6,8 @@
@finalout
@c %**end of header
-@set UPDATED 29 August 2014
-@set VERSION 1.2
+@set UPDATED 25 November 2014
+@set VERSION 1.3-pre1
@dircategory Data Compression
@direntry
@@ -39,6 +39,8 @@ This manual is for Plzip (version @value{VERSION}, @value{UPDATED}).
* Program design:: Internal structure of plzip
* Invoking plzip:: Command line interface
* File format:: Detailed format of the compressed file
+* Memory requirements:: Memory required to compress and decompress
+* Minimum file sizes:: Minimum file sizes required for full speed
* Problems:: Reporting bugs
* Concept index:: Index of concepts
@end menu
@@ -60,15 +62,17 @@ the one of lzip, bzip2 or gzip.
Plzip can compress/decompress large files on multiprocessor machines
much faster than lzip, at the cost of a slightly reduced compression
-ratio. Note that the number of usable threads is limited by file size;
-on files larger than a few GB plzip can use hundreds of processors, but
-on files of only a few MB plzip is no faster than lzip.
+ratio (0.4 to 2 percent larger compressed files). Note that the number
+of usable threads is limited by file size; on files larger than a few GB
+plzip can use hundreds of processors, but on files of only a few MB
+plzip is no faster than lzip (@pxref{Minimum file sizes}).
Plzip uses the lzip file format; the files produced by plzip are fully
compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
-The lzip file format is designed for long-term data archiving, taking
-into account both data integrity and decoder availability:
+The lzip file format is designed for data sharing and long-term
+archiving, taking into account both data integrity and decoder
+availability:
@itemize @bullet
@item
@@ -87,8 +91,8 @@ data from a lzip file long after quantum computers eventually render
LZMA obsolete.
@item
-Additionally lzip is copylefted, which guarantees that it will remain
-free forever.
+Additionally the lzip reference implementation is copylefted, which
+guarantees that it will remain free forever.
@end itemize
A nice feature of the lzip format is that a corrupt byte is easier to
@@ -96,47 +100,15 @@ repair the nearer it is from the beginning of the file. Therefore, with
the help of lziprecover, losing an entire archive just because of a
corrupt byte near the beginning is a thing of the past.
-The member trailer stores the 32-bit CRC of the original data, the size
-of the original data and the size of the member. These values, together
-with the value remaining in the range decoder and the end-of-stream
-marker, provide a 4 factor integrity checking which guarantees that the
-decompressed version of the data is identical to the original. This
-guards against corruption of the compressed data, and against undetected
-bugs in plzip (hopefully very unlikely). The chances of data corruption
-going undetected are microscopic. Be aware, though, that the check
-occurs upon decompression, so it can only tell you that something is
-wrong. It can't help you recover the original uncompressed data.
-
Plzip uses the same well-defined exit status values used by lzip and
bzip2, which makes it safer than compressors returning ambiguous warning
values (like gzip) when it is used as a back end for other programs like
tar or zutils.
-The amount of memory required @strong{per thread} is approximately the
-following:
-
-@itemize @bullet
-@item
-For compression; 3 times the data size (@pxref{--data-size}) plus 11
-times the dictionary size.
-
-@item
-For decompression or testing of a non-seekable file or of standard
-input; 2 times the dictionary size plus up to 32 MiB.
-
-@item
-For decompression of a regular file to a non-seekable file or to
-standard output; the dictionary size plus up to 32 MiB.
-
-@item
-For decompression of a regular file to another regular file, or for
-testing of a regular file; the dictionary size.
-@end itemize
-
Plzip will automatically use the smallest possible dictionary size for
each file without exceeding the given limit. Keep in mind that the
decompression memory requirement is affected at compression time by the
-choice of dictionary size limit.
+choice of dictionary size limit (@pxref{Memory requirements}).
When compressing, plzip replaces every file given in the command line
with a compressed version of itself, with the name "original_name.lz".
@@ -277,8 +249,8 @@ detect the number of processors in the system and use it as default
value. @w{@samp{plzip --help}} shows the system's default value.
Note that the number of usable threads is limited to @w{ceil( file_size
-/ data_size )} during compression (@pxref{--data-size}), and to the
-number of members in the input during decompression.
+/ data_size )} during compression (@pxref{Minimum file sizes}), and to
+the number of members in the input during decompression.
@item -o @var{file}
@itemx --output=@var{file}
@@ -315,8 +287,8 @@ Verbose mode.@*
When compressing, show the compression ratio for each file processed. A
second @samp{-v} shows the progress of compression.@*
When decompressing or testing, further -v's (up to 4) increase the
-verbosity level, showing status, compression ratio, decompressed size,
-and compressed size.
+verbosity level, showing status, compression ratio, dictionary size,
+decompressed size, and compressed size.
@item -1 .. -9
Set the compression parameters (dictionary size and match length limit)
@@ -327,8 +299,7 @@ The bidimensional parameter space of LZMA can't be mapped to a linear
scale optimal for all files. If your files are large, very repetitive,
etc, you may need to use the @samp{--match-length} and
@samp{--dictionary-size} options directly to achieve optimal
-performance. For example, @samp{-9m64} usually compresses executables
-more (and faster) than @samp{-9}.
+performance.
@multitable {Level} {Dictionary size} {Match length limit}
@item Level @tab Dictionary size @tab Match length limit
@@ -449,6 +420,73 @@ facilitates safe recovery of undamaged members from multi-member files.
@end table
+@node Memory requirements
+@chapter Memory required to compress and decompress
+@cindex memory requirements
+
+The amount of memory required @strong{per thread} is approximately the
+following:
+
+@itemize @bullet
+@item
+For compression; 11 times the dictionary size plus 3 times the data size
+(@pxref{--data-size}).
+
+@item
+For decompression of a regular (seekable) file to another regular file,
+or for testing of a regular file; the dictionary size. Note that regular
+files with more than 1024 bytes of trailing garbage are treated as
+non-seekable.
+
+@item
+For testing of a non-seekable file or of standard input; the dictionary
+size plus up to 5 MiB.
+
+@item
+For decompression of a regular file to a non-seekable file or to
+standard output; the dictionary size plus up to 32 MiB.
+
+@item
+For decompression of a non-seekable file or of standard input; the
+dictionary size plus up to 35 MiB.
+@end itemize
+
+
+@node Minimum file sizes
+@chapter Minimum file sizes required for full compression speed
+@cindex minimum file sizes
+
+When compressing, plzip divides the input file into chunks and
+compresses as many chunks simultaneously as worker threads are chosen,
+creating a multi-member compressed file.
+
+For this to work as expected (and roughly multiply the compression speed
+by the number of available processors), the uncompressed file must be at
+least as large as the number of worker threads times the chunk size
+(@pxref{--data-size}). Else some processors will not get any data to
+compress, and compression will be proportionally slower. The maximum
+speed increase achievable on a given file is limited by the ratio
+@w{(file_size / data_size)}.
+
+The following table shows the minimum uncompressed file size needed for
+full use of N processors at a given compression level, using the default
+data size for each level:
+
+@multitable {Processors} {128 MiB} {128 MiB} {128 MiB} {128 MiB} {128 MiB} {128 MiB}
+@headitem Processors @tab 2 @tab 3 @tab 4 @tab 8 @tab 16 @tab 64
+@item Level
+@item -1 @tab 4 MiB @tab 6 MiB @tab 8 MiB @tab 16 MiB @tab 32 MiB @tab 128 MiB
+@item -2 @tab 6 MiB @tab 9 MiB @tab 12 MiB @tab 24 MiB @tab 48 MiB @tab 192 MiB
+@item -3 @tab 8 MiB @tab 12 MiB @tab 16 MiB @tab 32 MiB @tab 64 MiB @tab 256 MiB
+@item -4 @tab 12 MiB @tab 18 MiB @tab 24 MiB @tab 48 MiB @tab 96 MiB @tab 384 MiB
+@item -5 @tab 16 MiB @tab 24 MiB @tab 32 MiB @tab 64 MiB @tab 128 MiB @tab 512 MiB
+@item -6 @tab 32 MiB @tab 48 MiB @tab 64 MiB @tab 128 MiB @tab 256 MiB @tab 1 GiB
+@item -7 @tab 64 MiB @tab 96 MiB @tab 128 MiB @tab 256 MiB @tab 512 MiB @tab 2 GiB
+@item -8 @tab 96 MiB @tab 144 MiB @tab 192 MiB @tab 384 MiB @tab 768 MiB @tab 3 GiB
+@item -9 @tab 128 MiB @tab 192 MiB @tab 256 MiB @tab 512 MiB @tab 1 GiB @tab 4 GiB
+@end multitable
+
+
@node Problems
@chapter Reporting bugs
@cindex bugs