This is plzip.info, produced by makeinfo version 4.13 from plzip.texinfo. INFO-DIR-SECTION Data Compression START-INFO-DIR-ENTRY * Plzip: (plzip). Parallel compressor compatible with lzip END-INFO-DIR-ENTRY  File: plzip.info, Node: Top, Next: Introduction, Up: (dir) Plzip Manual ************ This manual is for Plzip (version 1.0, 29 May 2013). * Menu: * Introduction:: Purpose and features of plzip * Program Design:: Internal structure of plzip * Invoking Plzip:: Command line interface * File Format:: Detailed format of the compressed file * Problems:: Reporting bugs * Concept Index:: Index of concepts Copyright (C) 2009, 2010, 2011, 2012, 2013 Antonio Diaz Diaz. This manual is free documentation: you have unlimited permission to copy, distribute and modify it.  File: plzip.info, Node: Introduction, Next: Program Design, Prev: Top, Up: Top 1 Introduction ************** Plzip is a massively parallel (multi-threaded), lossless data compressor based on the lzlib compression library, with very safe integrity checking and a user interface similar to the one of bzip2, gzip or lzip. Plzip is intended for faster compression/decompression of big files on multiprocessor machines, which makes it specially well suited for distribution of big software files and large scale data archiving. On files big enough (several GB), plzip can use hundreds of processors. Plzip uses the lzip file format; the files produced by plzip are fully compatible with lzip-1.4 or newer, and can be rescued with lziprecover. Plzip uses the same well-defined exit status values used by lzip and bzip2, which makes it safer when used in pipes or scripts than compressors returning ambiguous warning values, like gzip. Plzip replaces every file given in the command line with a compressed version of itself, with the name "original_name.lz". Each compressed file has the same modification date, permissions, and, when possible, ownership as the corresponding original, so that these properties can be correctly restored at decompression time. Plzip is able to read from some types of non regular files if the `--stdout' option is specified. If no file names are specified, plzip compresses (or decompresses) from standard input to standard output. In this case, plzip will decline to write compressed output to a terminal, as this would be entirely incomprehensible and therefore pointless. Plzip will correctly decompress a file which is the concatenation of two or more compressed files. The result is the concatenation of the corresponding uncompressed files. Integrity testing of concatenated compressed files is also supported. When decompressing, plzip attempts to guess the name for the decompressed file from that of the compressed file as follows: filename.lz becomes filename filename.tlz becomes filename.tar anyothername becomes anyothername.out As a self-check for your protection, plzip stores in the member trailer the 32-bit CRC of the original data, the size of the original data and the size of the member. These values, together with the value remaining in the range decoder and the end-of-stream marker, provide a very safe 4 factor integrity checking which guarantees that the decompressed version of the data is identical to the original. This guards against corruption of the compressed data, and against undetected bugs in plzip (hopefully very unlikely). The chances of data corruption going undetected are microscopic. Be aware, though, that the check occurs upon decompression, so it can only tell you that something is wrong. It can't help you recover the original uncompressed data. WARNING! Even if plzip is bug-free, other causes may result in a corrupt compressed file (bugs in the system libraries, memory errors, etc). Therefore, if the data you are going to compress is important, give the `--keep' option to plzip and do not remove the original file until you verify the compressed file with a command like `plzip -cd file.lz | cmp file -'.  File: plzip.info, Node: Program Design, Next: Invoking Plzip, Prev: Introduction, Up: Top 2 Program Design **************** For each input file, a splitter thread and several worker threads are created, acting the main thread as muxer (multiplexer) thread. A "packet courier" takes care of data transfers among threads and limits the maximum number of data blocks (packets) being processed simultaneously. The splitter reads data blocks from the input file, and distributes them to the workers. The workers (de)compress the blocks received from the splitter. The muxer collects processed packets from the workers, and writes them to the output file. When decompressing from a regular file, the splitter is removed and the workers read directly from the input file. If the output file is also a regular file, the muxer is also removed, and the workers write directly to the output file. With these optimizations, decompression speed of large files with many members is only limited by the number of processors available and by I/O speed.  File: plzip.info, Node: Invoking Plzip, Next: File Format, Prev: Program Design, Up: Top 3 Invoking Plzip **************** The format for running plzip is: plzip [OPTIONS] [FILES] Plzip supports the following options: `-h' `--help' Print an informative help message describing the options and exit. `-V' `--version' Print the version number of plzip on the standard output and exit. `-B BYTES' `--data-size=BYTES' Set the input data block size in bytes. The input file will be divided in chunks of this size before compression is performed. Valid values range from 8KiB to 1GiB. Default value is two times the dictionary size. Plzip will reduce the dictionary size if it is larger than the chosen data size. `-c' `--stdout' Compress or decompress to standard output. Needed when reading from a named pipe (fifo) or from a device. `-d' `--decompress' Decompress. `-f' `--force' Force overwrite of output files. `-F' `--recompress' Force recompression of files whose name already has the `.lz' or `.tlz' suffix. `-k' `--keep' Keep (don't delete) input files during compression or decompression. `-m BYTES' `--match-length=BYTES' Set the match length limit in bytes. After a match this long is found, the search is finished. Valid values range from 5 to 273. Larger values usually give better compression ratios but longer compression times. `-n N' `--threads=N' Set the number of worker threads. Valid values range from 1 to "as many as your system can support". If this option is not used, plzip tries to detect the number of processors in the system and use it as default value. `plzip --help' shows the system's default value. `-o FILE' `--output=FILE' When reading from standard input and `--stdout' has not been specified, use `FILE' as the virtual name of the uncompressed file. This produces a file named `FILE' when decompressing, and a file named `FILE.lz' when compressing. `-q' `--quiet' Quiet operation. Suppress all messages. `-s BYTES' `--dictionary-size=BYTES' Set the dictionary size limit in bytes. Valid values range from 4KiB to 512MiB. Plzip will use the smallest possible dictionary size for each member without exceeding this limit. Note that dictionary sizes are quantized. If the specified size does not match one of the valid sizes, it will be rounded upwards by adding up to (BYTES / 16) to it. For maximum compression you should use a dictionary size limit as large as possible, but keep in mind that the decompression memory requirement is affected at compression time by the choice of dictionary size limit. `-t' `--test' Check integrity of the specified file(s), but don't decompress them. This really performs a trial decompression and throws away the result. Use it together with `-v' to see information about the file. `-v' `--verbose' Verbose mode. When compressing, show the compression ratio for each file processed. When decompressing or testing, further -v's (up to 4) increase the verbosity level, showing status, compression ratio, decompressed size, and compressed size. `-1 .. -9' Set the compression parameters (dictionary size and match length limit) as shown in the table below. Note that `-9' can be much slower than `-1'. These options have no effect when decompressing. The bidimensional parameter space of LZMA can't be mapped to a linear scale optimal for all files. If your files are large, very repetitive, etc, you may need to use the `--match-length' and `--dictionary-size' options directly to achieve optimal performance. Level Dictionary size Match length limit -1 1 MiB 5 bytes -2 1.5 MiB 6 bytes -3 2 MiB 8 bytes -4 3 MiB 12 bytes -5 4 MiB 20 bytes -6 8 MiB 36 bytes -7 16 MiB 68 bytes -8 24 MiB 132 bytes -9 32 MiB 273 bytes `--fast' `--best' Aliases for GNU gzip compatibility. Numbers given as arguments to options may be followed by a multiplier and an optional `B' for "byte". Table of SI and binary prefixes (unit multipliers): Prefix Value | Prefix Value k kilobyte (10^3 = 1000) | Ki kibibyte (2^10 = 1024) M megabyte (10^6) | Mi mebibyte (2^20) G gigabyte (10^9) | Gi gibibyte (2^30) T terabyte (10^12) | Ti tebibyte (2^40) P petabyte (10^15) | Pi pebibyte (2^50) E exabyte (10^18) | Ei exbibyte (2^60) Z zettabyte (10^21) | Zi zebibyte (2^70) Y yottabyte (10^24) | Yi yobibyte (2^80) Exit status: 0 for a normal exit, 1 for environmental problems (file not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or invalid input file, 3 for an internal consistency error (eg, bug) which caused plzip to panic.  File: plzip.info, Node: File Format, Next: Problems, Prev: Invoking Plzip, Up: Top 4 File Format ************* Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away. -- Antoine de Saint-Exupery In the diagram below, a box like this: +---+ | | <-- the vertical bars might be missing +---+ represents one byte; a box like this: +==============+ | | +==============+ represents a variable number of bytes. A lzip file consists of a series of "members" (compressed data sets). The members simply appear one after another in the file, with no additional information before, between, or after them. Each member has the following structure: +--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ID string | VN | DS | Lzma stream | CRC32 | Data size | Member size | +--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ All multibyte values are stored in little endian order. `ID string' A four byte string, identifying the lzip format, with the value "LZIP". `VN (version number, 1 byte)' Just in case something needs to be modified in the future. 1 for now. `DS (coded dictionary size, 1 byte)' Lzip divides the distance between any two powers of 2 into 8 equally spaced intervals, named "wedges". The dictionary size is calculated by taking a power of 2 (the base size) and substracting from it a number of wedges between 0 and 7. The size of a wedge is (base_size / 16). Bits 4-0 contain the base 2 logarithm of the base size (12 to 29). Bits 7-5 contain the number of wedges (0 to 7) to substract from the base size to obtain the dictionary size. Example: 0xD3 = (2^19 - 6 * 2^15) = (512KiB - 6 * 32KiB) = 320KiB Valid values for dictionary size range from 4KiB to 512MiB. `Lzma stream' The lzma stream, finished by an end of stream marker. Uses default values for encoder properties. See the lzip manual for a full description. `CRC32 (4 bytes)' CRC of the uncompressed original data. `Data size (8 bytes)' Size of the uncompressed original data. `Member size (8 bytes)' Total size of the member, including header and trailer. This field acts as a distributed index, allows the verification of stream integrity, and facilitates safe recovery of undamaged members from multi-member files.  File: plzip.info, Node: Problems, Next: Concept Index, Prev: File Format, Up: Top 5 Reporting Bugs **************** There are probably bugs in plzip. There are certainly errors and omissions in this manual. If you report them, they will get fixed. If you don't, no one will ever know about them and they will remain unfixed for all eternity, if not longer. If you find a bug in plzip, please send electronic mail to . Include the version number, which you can find by running `plzip --version'.  File: plzip.info, Node: Concept Index, Prev: Problems, Up: Top Concept Index ************* [index] * Menu: * bugs: Problems. (line 6) * file format: File Format. (line 6) * getting help: Problems. (line 6) * introduction: Introduction. (line 6) * invoking: Invoking Plzip. (line 6) * options: Invoking Plzip. (line 6) * program design: Program Design. (line 6) * usage: Invoking Plzip. (line 6) * version: Invoking Plzip. (line 6)  Tag Table: Node: Top223 Node: Introduction865 Node: Program Design4113 Node: Invoking Plzip5167 Node: File Format10416 Node: Problems12895 Node: Concept Index13424  End Tag Table  Local Variables: coding: iso-8859-15 End: