path: root/doc/plzip.info

This is plzip.info, produced by makeinfo version 4.13+ from plzip.texi.

INFO-DIR-SECTION Data Compression
START-INFO-DIR-ENTRY
* Plzip: (plzip).               Parallel compressor compatible with lzip
END-INFO-DIR-ENTRY


File: plzip.info,  Node: Top,  Next: Introduction,  Up: (dir)

Plzip Manual
************

This manual is for Plzip (version 1.6, 12 April 2017).

* Menu:

* Introduction::           Purpose and features of plzip
* Invoking plzip::         Command line interface
* Program design::         Internal structure of plzip
* File format::            Detailed format of the compressed file
* Memory requirements::    Memory required to compress and decompress
* Minimum file sizes::     Minimum file sizes required for full speed
* Trailing data::          Extra data appended to the file
* Examples::               A small tutorial with examples
* Problems::               Reporting bugs
* Concept index::          Index of concepts


   Copyright (C) 2009-2017 Antonio Diaz Diaz.

   This manual is free documentation: you have unlimited permission to
copy, distribute and modify it.


File: plzip.info,  Node: Introduction,  Next: Invoking plzip,  Prev: Top,  Up: Top

1 Introduction
**************

Plzip is a massively parallel (multi-threaded) lossless data compressor
based on the lzlib compression library, with a user interface similar to
the one of lzip, bzip2 or gzip.

   Plzip can compress/decompress large files on multiprocessor machines
much faster than lzip, at the cost of a slightly reduced compression
ratio (0.4 to 2 percent larger compressed files). Note that the number
of usable threads is limited by file size; on files larger than a few GB
plzip can use hundreds of processors, but on files of only a few MB
plzip is no faster than lzip (*note Minimum file sizes::).

   Plzip uses the lzip file format; the files produced by plzip are
fully compatible with lzip-1.4 or newer, and can be rescued with
lziprecover.

   The lzip file format is designed for data sharing and long-term
archiving, taking into account both data integrity and decoder
availability:

   * The lzip format provides very safe integrity checking and some data
     recovery means. The lziprecover program can repair bit-flip errors
     (one of the most common forms of data corruption) in lzip files,
     and provides data recovery capabilities, including error-checked
     merging of damaged copies of a file.  *Note Data safety:
     (lziprecover)Data safety.

   * The lzip format is as simple as possible (but not simpler). The
     lzip manual provides the source code of a simple decompressor
     along with a detailed explanation of how it works, so that with
     the only help of the lzip manual it would be possible for a
     digital archaeologist to extract the data from a lzip file long
     after quantum computers eventually render LZMA obsolete.

   * Additionally the lzip reference implementation is copylefted, which
     guarantees that it will remain free forever.

   A nice feature of the lzip format is that a corrupt byte is easier to
repair the nearer it is from the beginning of the file. Therefore, with
the help of lziprecover, losing an entire archive just because of a
corrupt byte near the beginning is a thing of the past.

   Plzip uses the same well-defined exit status values used by lzip and
bzip2, which makes it safer than compressors returning ambiguous warning
values (like gzip) when it is used as a back end for other programs like
tar or zutils.

   Plzip will automatically use the smallest possible dictionary size
for each file without exceeding the given limit. Keep in mind that the
decompression memory requirement is affected at compression time by the
choice of dictionary size limit (*note Memory requirements::).

   When compressing, plzip replaces every file given in the command line
with a compressed version of itself, with the name "original_name.lz".
When decompressing, plzip attempts to guess the name for the
decompressed file from that of the compressed file as follows:

filename.lz    becomes   filename
filename.tlz   becomes   filename.tar
anyothername   becomes   anyothername.out

   (De)compressing a file is much like copying or moving it; therefore
plzip preserves the access and modification dates, permissions, and,
when possible, ownership of the file just as "cp -p" does. (If the user
ID or the group ID can't be duplicated, the file permission bits
S_ISUID and S_ISGID are cleared).

   Plzip is able to read from some types of non regular files if the
'--stdout' option is specified.

   If no file names are specified, plzip compresses (or decompresses)
from standard input to standard output. In this case, plzip will
decline to write compressed output to a terminal, as this would be
entirely incomprehensible and therefore pointless.

   Plzip will correctly decompress a file which is the concatenation of
two or more compressed files. The result is the concatenation of the
corresponding uncompressed files. Integrity testing of concatenated
compressed files is also supported.

   LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may
never have been compressed. Decompressed is used to refer to data which
have undergone the process of decompression.


File: plzip.info,  Node: Invoking plzip,  Next: Program design,  Prev: Introduction,  Up: Top

2 Invoking plzip
****************

The format for running plzip is:

     plzip [OPTIONS] [FILES]

'-' used as a FILE argument means standard input. It can be mixed with
other FILES and is read just once, the first time it appears in the
command line.

   Plzip supports the following options:

'-h'
'--help'
     Print an informative help message describing the options and exit.

'-V'
'--version'
     Print the version number of plzip on the standard output and exit.

'-a'
'--trailing-error'
     Exit with error status 2 if any remaining input is detected after
     decompressing the last member. Such remaining input is usually
     trailing garbage that can be safely ignored. *Note
     concat-example::.

'-B BYTES'
'--data-size=BYTES'
     Set the size of the input data blocks, in bytes. The input file
     will be divided in chunks of this size before compression is
     performed. Valid values range from 8 KiB to 1 GiB. Default value
     is two times the dictionary size, except for option '-0' where it
     defaults to 1 MiB.  Plzip will reduce the dictionary size if it is
     larger than the chosen data size.

'-c'
'--stdout'
     Compress or decompress to standard output; keep input files
     unchanged.  If compressing several files, each file is compressed
     independently.  This option is needed when reading from a named
     pipe (fifo) or from a device.

'-d'
'--decompress'
     Decompress the specified file(s). If a file does not exist or
     can't be opened, plzip continues decompressing the rest of the
     files. If a file fails to decompress, plzip exits immediately
     without decompressing the rest of the files.

'-f'
'--force'
     Force overwrite of output files.

'-F'
'--recompress'
     Force re-compression of files whose name already has the '.lz' or
     '.tlz' suffix.

'-k'
'--keep'
     Keep (don't delete) input files during compression or
     decompression.

'-l'
'--list'
     Print the uncompressed size, compressed size and percentage saved
     of the specified file(s). Trailing data are ignored. The values
     produced are correct even for multimember files. If more than one
     file is given, a final line containing the cumulative sizes is
     printed. With '-v', the dictionary size, the number of members in
     the file, and the amount of trailing data (if any) are also
     printed. With '-vv', the positions and sizes of each member in
     multimember files are also printed. '-lq' can be used to verify
     quickly (without decompressing) the structural integrity of the
     specified files. (Use '--test' to verify the data integrity).
     '-alq' additionally verifies that none of the specified files
     contain trailing data.

'-m BYTES'
'--match-length=BYTES'
     Set the match length limit in bytes. After a match this long is
     found, the search is finished. Valid values range from 5 to 273.
     Larger values usually give better compression ratios but longer
     compression times.

'-n N'
'--threads=N'
     Set the number of worker threads. Valid values range from 1 to "as
     many as your system can support". If this option is not used,
     plzip tries to detect the number of processors in the system and
     use it as default value. 'plzip --help' shows the system's default
     value.

     Note that the number of usable threads is limited to
     ceil( file_size / data_size ) during compression (*note Minimum
     file sizes::), and to the number of members in the input during
     decompression.

'-o FILE'
'--output=FILE'
     When reading from standard input and '--stdout' has not been
     specified, use 'FILE' as the virtual name of the uncompressed
     file. This produces a file named 'FILE' when decompressing, and a
     file named 'FILE.lz' when compressing.

'-q'
'--quiet'
     Quiet operation. Suppress all messages.

'-s BYTES'
'--dictionary-size=BYTES'
     Set the dictionary size limit in bytes. Plzip will use the smallest
     possible dictionary size for each file without exceeding this
     limit.  Valid values range from 4 KiB to 512 MiB. Values 12 to 29
     are interpreted as powers of two, meaning 2^12 to 2^29 bytes. Note
     that dictionary sizes are quantized. If the specified size does
     not match one of the valid sizes, it will be rounded upwards by
     adding up to (BYTES / 8) to it.

     For maximum compression you should use a dictionary size limit as
     large as possible, but keep in mind that the decompression memory
     requirement is affected at compression time by the choice of
     dictionary size limit.

'-t'
'--test'
     Check integrity of the specified file(s), but don't decompress
     them.  This really performs a trial decompression and throws away
     the result.  Use it together with '-v' to see information about
     the file(s). If a file does not exist, can't be opened, or is a
     terminal, plzip continues checking the rest of the files. If a
     file fails the test, plzip may be unable to check the rest of the
     files.

'-v'
'--verbose'
     Verbose mode.
     When compressing, show the compression ratio for each file
     processed. A second '-v' shows the progress of compression.
     When decompressing or testing, further -v's (up to 4) increase the
     verbosity level, showing status, compression ratio, dictionary
     size, decompressed size, and compressed size.

'-0 .. -9'
     Set the compression parameters (dictionary size and match length
     limit) as shown in the table below. The default compression level
     is '-6'.  Note that '-9' can be much slower than '-0'. These
     options have no effect when decompressing.

     The bidimensional parameter space of LZMA can't be mapped to a
     linear scale optimal for all files. If your files are large, very
     repetitive, etc, you may need to use the '--dictionary-size' and
     '--match-length' options directly to achieve optimal performance.

     Level   Dictionary size   Match length limit
     -0      64 KiB            16 bytes
     -1      1 MiB             5 bytes
     -2      1.5 MiB           6 bytes
     -3      2 MiB             8 bytes
     -4      3 MiB             12 bytes
     -5      4 MiB             20 bytes
     -6      8 MiB             36 bytes
     -7      16 MiB            68 bytes
     -8      24 MiB            132 bytes
     -9      32 MiB            273 bytes

'--fast'
'--best'
     Aliases for GNU gzip compatibility.


   Numbers given as arguments to options may be followed by a multiplier
and an optional 'B' for "byte".

   Table of SI and binary prefixes (unit multipliers):

Prefix   Value                     |   Prefix   Value
k        kilobyte  (10^3 = 1000)   |   Ki       kibibyte (2^10 = 1024)
M        megabyte  (10^6)          |   Mi       mebibyte (2^20)
G        gigabyte  (10^9)          |   Gi       gibibyte (2^30)
T        terabyte  (10^12)         |   Ti       tebibyte (2^40)
P        petabyte  (10^15)         |   Pi       pebibyte (2^50)
E        exabyte   (10^18)         |   Ei       exbibyte (2^60)
Z        zettabyte (10^21)         |   Zi       zebibyte (2^70)
Y        yottabyte (10^24)         |   Yi       yobibyte (2^80)


   Exit status: 0 for a normal exit, 1 for environmental problems (file
not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
invalid input file, 3 for an internal consistency error (eg, bug) which
caused plzip to panic.


File: plzip.info,  Node: Program design,  Next: File format,  Prev: Invoking plzip,  Up: Top

3 Program design
****************

When compressing, plzip divides the input file into chunks and
compresses as many chunks simultaneously as worker threads are chosen,
creating a multimember compressed file.

   When decompressing, plzip decompresses as many members
simultaneously as worker threads are chosen. Files that were compressed
with lzip will not be decompressed faster than using lzip (unless the
'-b' option was used) because lzip usually produces single-member
files, which can't be decompressed in parallel.

   For each input file, a splitter thread and several worker threads are
created, acting the main thread as muxer (multiplexer) thread. A "packet
courier" takes care of data transfers among threads and limits the
maximum number of data blocks (packets) being processed simultaneously.

   The splitter reads data blocks from the input file, and distributes
them to the workers. The workers (de)compress the blocks received from
the splitter. The muxer collects processed packets from the workers, and
writes them to the output file.

   When decompressing from a regular file, the splitter is removed and
the workers read directly from the input file. If the output file is
also a regular file, the muxer is also removed and the workers write
directly to the output file. With these optimizations, the use of RAM
is greatly reduced and the decompression speed of large files with many
members is only limited by the number of processors available and by
I/O speed.


File: plzip.info,  Node: File format,  Next: Memory requirements,  Prev: Program design,  Up: Top

4 File format
*************

Perfection is reached, not when there is no longer anything to add, but
when there is no longer anything to take away.
-- Antoine de Saint-Exupery


   In the diagram below, a box like this:
+---+
|   | <-- the vertical bars might be missing
+---+

   represents one byte; a box like this:
+==============+
|              |
+==============+

   represents a variable number of bytes.


   A lzip file consists of a series of "members" (compressed data sets).
The members simply appear one after another in the file, with no
additional information before, between, or after them.

   Each member has the following structure:
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID string | VN | DS | LZMA stream | CRC32 |   Data size   |  Member size  |
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   All multibyte values are stored in little endian order.

'ID string (the "magic" bytes)'
     A four byte string, identifying the lzip format, with the value
     "LZIP" (0x4C, 0x5A, 0x49, 0x50).

'VN (version number, 1 byte)'
     Just in case something needs to be modified in the future. 1 for
     now.

'DS (coded dictionary size, 1 byte)'
     The dictionary size is calculated by taking a power of 2 (the base
     size) and substracting from it a fraction between 0/16 and 7/16 of
     the base size.
     Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).
     Bits 7-5 contain the numerator of the fraction (0 to 7) to
     substract from the base size to obtain the dictionary size.
     Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB
     Valid values for dictionary size range from 4 KiB to 512 MiB.

'LZMA stream'
     The LZMA stream, finished by an end of stream marker. Uses default
     values for encoder properties.  *Note Stream format: (lzip)Stream
     format, for a complete description.

'CRC32 (4 bytes)'
     CRC of the uncompressed original data.

'Data size (8 bytes)'
     Size of the uncompressed original data.

'Member size (8 bytes)'
     Total size of the member, including header and trailer. This field
     acts as a distributed index, allows the verification of stream
     integrity, and facilitates safe recovery of undamaged members from
     multimember files.



File: plzip.info,  Node: Memory requirements,  Next: Minimum file sizes,  Prev: File format,  Up: Top

5 Memory required to compress and decompress
********************************************

The amount of memory required *per thread* is approximately the
following:

   * For compression at level -0; 1.5 MiB plus 3 times the data size
     (*note --data-size::). Default is 4.5 MiB.

   * For compression at other levels; 11 times the dictionary size plus
     3 times the data size. Default is 136 MiB.

   * For decompression of a regular (seekable) file to another regular
     file, or for testing of a regular file; the dictionary size.

   * For testing of a non-seekable file or of standard input; the
     dictionary size plus up to 5 MiB.

   * For decompression of a regular file to a non-seekable file or to
     standard output; the dictionary size plus up to 32 MiB.

   * For decompression of a non-seekable file or of standard input; the
     dictionary size plus up to 35 MiB.


File: plzip.info,  Node: Minimum file sizes,  Next: Trailing data,  Prev: Memory requirements,  Up: Top

6 Minimum file sizes required for full compression speed
********************************************************

When compressing, plzip divides the input file into chunks and
compresses as many chunks simultaneously as worker threads are chosen,
creating a multimember compressed file.

   For this to work as expected (and roughly multiply the compression
speed by the number of available processors), the uncompressed file
must be at least as large as the number of worker threads times the
chunk size (*note --data-size::). Else some processors will not get any
data to compress, and compression will be proportionally slower. The
maximum speed increase achievable on a given file is limited by the
ratio (file_size / data_size).

   The following table shows the minimum uncompressed file size needed
for full use of N processors at a given compression level, using the
default data size for each level:

Processors   2         4         8         16        64        256
------------------------------------------------------------------------- 
Level                                                          
-0           2 MiB     4 MiB     8 MiB     16 MiB    64 MiB    256 MiB
-1           4 MiB     8 MiB     16 MiB    32 MiB    128 MiB   512 MiB
-2           6 MiB     12 MiB    24 MiB    48 MiB    192 MiB   768 MiB
-3           8 MiB     16 MiB    32 MiB    64 MiB    256 MiB   1 GiB
-4           12 MiB    24 MiB    48 MiB    96 MiB    384 MiB   1.5 GiB
-5           16 MiB    32 MiB    64 MiB    128 MiB   512 MiB   2 GiB
-6           32 MiB    64 MiB    128 MiB   256 MiB   1 GiB     4 GiB
-7           64 MiB    128 MiB   256 MiB   512 MiB   2 GiB     8 GiB
-8           96 MiB    192 MiB   384 MiB   768 MiB   3 GiB     12 GiB
-9           128 MiB   256 MiB   512 MiB   1 GiB     4 GiB     16 GiB


File: plzip.info,  Node: Trailing data,  Next: Examples,  Prev: Minimum file sizes,  Up: Top

7 Extra data appended to the file
*********************************

Sometimes extra data are found appended to a lzip file after the last
member. Such trailing data may be:

   * Padding added to make the file size a multiple of some block size,
     for example when writing to a tape. It is safe to append any
     amount of padding zero bytes to a lzip file.

   * Useful data added by the user; a cryptographically secure hash, a
     description of file contents, etc. It is safe to append any amount
     of text to a lzip file as long as the text does not begin with the
     string "LZIP", and does not contain any zero bytes (null
     characters). Nonzero bytes and zero bytes can't be safely mixed in
     trailing data.

   * Garbage added by some not totally successful copy operation.

   * Malicious data added to the file in order to make its total size
     and hash value (for a chosen hash) coincide with those of another
     file.

   * In very rare cases, trailing data could be the corrupt header of
     another member. In multimember or concatenated files the
     probability of corruption happening in the magic bytes is 5 times
     smaller than the probability of getting a false positive caused by
     the corruption of the integrity information itself. Therefore it
     can be considered to be below the noise level.

   Trailing data are in no way part of the lzip file format, but tools
reading lzip files are expected to behave as correctly and usefully as
possible in the presence of trailing data.

   Trailing data can be safely ignored in most cases. In some cases,
like that of user-added data, they are expected to be ignored. In those
cases where a file containing trailing data must be rejected, the option
'--trailing-error' can be used. *Note --trailing-error::.


File: plzip.info,  Node: Examples,  Next: Problems,  Prev: Trailing data,  Up: Top

8 A small tutorial with examples
********************************

WARNING! Even if plzip is bug-free, other causes may result in a corrupt
compressed file (bugs in the system libraries, memory errors, etc).
Therefore, if the data you are going to compress are important, give the
'--keep' option to plzip and don't remove the original file until you
verify the compressed file with a command like
'plzip -cd file.lz | cmp file -'.


Example 1: Replace a regular file with its compressed version 'file.lz'
and show the compression ratio.

     plzip -v file


Example 2: Like example 1 but the created 'file.lz' has a block size of
1 MiB. The compression ratio is not shown.

     plzip -B 1MiB file


Example 3: Restore a regular file from its compressed version
'file.lz'. If the operation is successful, 'file.lz' is removed.

     plzip -d file.lz


Example 4: Verify the integrity of the compressed file 'file.lz' and
show status.

     plzip -tv file.lz


Example 5: Compress a whole device in /dev/sdc and send the output to
'file.lz'.

     plzip -c /dev/sdc > file.lz


Example 6: The right way of concatenating the decompressed output of two
or more compressed files. *Note Trailing data::.

     Don't do this
       cat file1.lz file2.lz file3.lz | plzip -d
     Do this instead
       plzip -cd file1.lz file2.lz file3.lz


Example 7: Decompress 'file.lz' partially until 10 KiB of decompressed
data are produced.

     plzip -cd file.lz | dd bs=1024 count=10


Example 8: Decompress 'file.lz' partially from decompressed byte 10000
to decompressed byte 15000 (5000 bytes are produced).

     plzip -cd file.lz | dd bs=1000 skip=10 count=5


File: plzip.info,  Node: Problems,  Next: Concept index,  Prev: Examples,  Up: Top

9 Reporting bugs
****************

There are probably bugs in plzip. There are certainly errors and
omissions in this manual. If you report them, they will get fixed. If
you don't, no one will ever know about them and they will remain unfixed
for all eternity, if not longer.

   If you find a bug in plzip, please send electronic mail to
<lzip-bug@nongnu.org>. Include the version number, which you can find
by running 'plzip --version'.


File: plzip.info,  Node: Concept index,  Prev: Problems,  Up: Top

Concept index
*************

[index]
* Menu:

* bugs:                                  Problems.              (line 6)
* examples:                              Examples.              (line 6)
* file format:                           File format.           (line 6)
* getting help:                          Problems.              (line 6)
* introduction:                          Introduction.          (line 6)
* invoking:                              Invoking plzip.        (line 6)
* memory requirements:                   Memory requirements.   (line 6)
* minimum file sizes:                    Minimum file sizes.    (line 6)
* options:                               Invoking plzip.        (line 6)
* program design:                        Program design.        (line 6)
* trailing data:                         Trailing data.         (line 6)
* usage:                                 Invoking plzip.        (line 6)
* version:                               Invoking plzip.        (line 6)



Tag Table:
Node: Top221
Node: Introduction1103
Node: Invoking plzip5274
Ref: --trailing-error5843
Ref: --data-size6086
Node: Program design12796
Node: File format14383
Node: Memory requirements16815
Node: Minimum file sizes17815
Node: Trailing data19741
Node: Examples21648
Ref: concat-example22813
Node: Problems23388
Node: Concept index23914

End Tag Table


Local Variables:
coding: iso-8859-15
End: