path: root/doc/plzip.texinfo

\input texinfo @c -*-texinfo-*-
@c %**start of header
@setfilename plzip.info
@documentencoding ISO-8859-15
@settitle Plzip Manual
@finalout
@c %**end of header

@set UPDATED 29 May 2013
@set VERSION 1.0

@dircategory Data Compression
@direntry
* Plzip: (plzip).               Parallel compressor compatible with lzip
@end direntry


@ifnothtml
@titlepage
@title Plzip
@subtitle Parallel compressor compatible with lzip
@subtitle for Plzip version @value{VERSION}, @value{UPDATED}
@author by Antonio Diaz Diaz

@page
@vskip 0pt plus 1filll
@end titlepage

@contents
@end ifnothtml

@node Top
@top

This manual is for Plzip (version @value{VERSION}, @value{UPDATED}).

@menu
* Introduction::           Purpose and features of plzip
* Program Design::         Internal structure of plzip
* Invoking Plzip::         Command line interface
* File Format::            Detailed format of the compressed file
* Problems::               Reporting bugs
* Concept Index::          Index of concepts
@end menu

@sp 1
Copyright @copyright{} 2009, 2010, 2011, 2012, 2013 Antonio Diaz Diaz.

This manual is free documentation: you have unlimited permission
to copy, distribute and modify it.


@node Introduction
@chapter Introduction
@cindex introduction

Plzip is a massively parallel (multi-threaded), lossless data compressor
based on the lzlib compression library, with very safe integrity
checking and a user interface similar to the one of bzip2, gzip or lzip.

Plzip is intended for faster compression/decompression of big files on
multiprocessor machines, which makes it specially well suited for
distribution of big software files and large scale data archiving. On
files big enough (several GB), plzip can use hundreds of processors.

Plzip uses the lzip file format; the files produced by plzip are fully
compatible with lzip-1.4 or newer, and can be rescued with lziprecover.

Plzip uses the same well-defined exit status values used by lzip and
bzip2, which makes it safer when used in pipes or scripts than
compressors returning ambiguous warning values, like gzip.

Plzip replaces every file given in the command line with a compressed
version of itself, with the name "original_name.lz". Each compressed
file has the same modification date, permissions, and, when possible,
ownership as the corresponding original, so that these properties can be
correctly restored at decompression time. Plzip is able to read from some
types of non regular files if the @samp{--stdout} option is specified.

If no file names are specified, plzip compresses (or decompresses) from
standard input to standard output. In this case, plzip will decline to
write compressed output to a terminal, as this would be entirely
incomprehensible and therefore pointless.

Plzip will correctly decompress a file which is the concatenation of two
or more compressed files. The result is the concatenation of the
corresponding uncompressed files. Integrity testing of concatenated
compressed files is also supported.

When decompressing, plzip attempts to guess the name for the decompressed
file from that of the compressed file as follows:

@multitable {anyothername} {becomes} {anyothername.out}
@item filename.lz  @tab becomes @tab filename
@item filename.tlz @tab becomes @tab filename.tar
@item anyothername @tab becomes @tab anyothername.out
@end multitable

As a self-check for your protection, plzip stores in the member trailer
the 32-bit CRC of the original data, the size of the original data and
the size of the member. These values, together with the value remaining
in the range decoder and the end-of-stream marker, provide a very safe 4
factor integrity checking which guarantees that the decompressed version
of the data is identical to the original. This guards against corruption
of the compressed data, and against undetected bugs in plzip (hopefully
very unlikely). The chances of data corruption going undetected are
microscopic. Be aware, though, that the check occurs upon decompression,
so it can only tell you that something is wrong. It can't help you
recover the original uncompressed data.

WARNING! Even if plzip is bug-free, other causes may result in a corrupt
compressed file (bugs in the system libraries, memory errors, etc).
Therefore, if the data you are going to compress is important, give the
@samp{--keep} option to plzip and do not remove the original file until
you verify the compressed file with a command like
@w{@samp{plzip -cd file.lz | cmp file -}}.


@node Program Design
@chapter Program Design
@cindex program design

For each input file, a splitter thread and several worker threads are
created, acting the main thread as muxer (multiplexer) thread. A "packet
courier" takes care of data transfers among threads and limits the
maximum number of data blocks (packets) being processed simultaneously.

The splitter reads data blocks from the input file, and distributes them
to the workers. The workers (de)compress the blocks received from the
splitter. The muxer collects processed packets from the workers, and
writes them to the output file.

When decompressing from a regular file, the splitter is removed and the
workers read directly from the input file. If the output file is also a
regular file, the muxer is also removed, and the workers write directly
to the output file. With these optimizations, decompression speed of
large files with many members is only limited by the number of
processors available and by I/O speed.


@node Invoking Plzip
@chapter Invoking Plzip
@cindex invoking
@cindex options
@cindex usage
@cindex version

The format for running plzip is:

@example
plzip [@var{options}] [@var{files}]
@end example

Plzip supports the following options:

@table @samp
@item -h
@itemx --help
Print an informative help message describing the options and exit.

@item -V
@itemx --version
Print the version number of plzip on the standard output and exit.

@item -B @var{bytes}
@itemx --data-size=@var{bytes}
Set the input data block size in bytes. The input file will be divided
in chunks of this size before compression is performed. Valid values
range from 8KiB to 1GiB. Default value is two times the dictionary size.
Plzip will reduce the dictionary size if it is larger than the chosen
data size.

@item -c
@itemx --stdout
Compress or decompress to standard output. Needed when reading from a
named pipe (fifo) or from a device.

@item -d
@itemx --decompress
Decompress.

@item -f
@itemx --force
Force overwrite of output files.

@item -F
@itemx --recompress
Force recompression of files whose name already has the @samp{.lz} or
@samp{.tlz} suffix.

@item -k
@itemx --keep
Keep (don't delete) input files during compression or decompression.

@item -m @var{bytes}
@itemx --match-length=@var{bytes}
Set the match length limit in bytes. After a match this long is found,
the search is finished. Valid values range from 5 to 273. Larger values
usually give better compression ratios but longer compression times.

@item -n @var{n}
@itemx --threads=@var{n}
Set the number of worker threads. Valid values range from 1 to "as many
as your system can support". If this option is not used, plzip tries to
detect the number of processors in the system and use it as default
value. @w{@samp{plzip --help}} shows the system's default value.

@item -o @var{file}
@itemx --output=@var{file}
When reading from standard input and @samp{--stdout} has not been
specified, use @samp{@var{file}} as the virtual name of the uncompressed
file. This produces a file named @samp{@var{file}} when decompressing,
and a file named @samp{@var{file}.lz} when compressing.

@item -q
@itemx --quiet
Quiet operation. Suppress all messages.

@item -s @var{bytes}
@itemx --dictionary-size=@var{bytes}
Set the dictionary size limit in bytes. Valid values range from 4KiB to
512MiB. Plzip will use the smallest possible dictionary size for each
member without exceeding this limit. Note that dictionary sizes are
quantized. If the specified size does not match one of the valid sizes,
it will be rounded upwards by adding up to (@var{bytes} / 16) to it.

For maximum compression you should use a dictionary size limit as large
as possible, but keep in mind that the decompression memory requirement
is affected at compression time by the choice of dictionary size limit.

@item -t
@itemx --test
Check integrity of the specified file(s), but don't decompress them.
This really performs a trial decompression and throws away the result.
Use it together with @samp{-v} to see information about the file.

@item -v
@itemx --verbose
Verbose mode.@*
When compressing, show the compression ratio for each file processed.@*
When decompressing or testing, further -v's (up to 4) increase the
verbosity level, showing status, compression ratio, decompressed size,
and compressed size.

@item -1 .. -9
Set the compression parameters (dictionary size and match length limit)
as shown in the table below. Note that @samp{-9} can be much slower than
@samp{-1}. These options have no effect when decompressing.

The bidimensional parameter space of LZMA can't be mapped to a linear
scale optimal for all files. If your files are large, very repetitive,
etc, you may need to use the @samp{--match-length} and
@samp{--dictionary-size} options directly to achieve optimal
performance.

@multitable {Level} {Dictionary size} {Match length limit}
@item Level @tab Dictionary size @tab Match length limit
@item -1 @tab  1 MiB @tab   5 bytes
@item -2 @tab  1.5 MiB @tab   6 bytes
@item -3 @tab  2 MiB @tab   8 bytes
@item -4 @tab  3 MiB @tab  12 bytes
@item -5 @tab  4 MiB @tab  20 bytes
@item -6 @tab  8 MiB @tab  36 bytes
@item -7 @tab 16 MiB @tab  68 bytes
@item -8 @tab 24 MiB @tab 132 bytes
@item -9 @tab 32 MiB @tab 273 bytes
@end multitable

@item --fast
@itemx --best
Aliases for GNU gzip compatibility.

@end table

@sp 1
Numbers given as arguments to options may be followed by a multiplier
and an optional @samp{B} for "byte".

Table of SI and binary prefixes (unit multipliers):

@multitable {Prefix} {kilobyte  (10^3 = 1000)} {|} {Prefix} {kibibyte (2^10 = 1024)}
@item Prefix @tab Value               @tab | @tab Prefix @tab Value
@item k @tab kilobyte  (10^3 = 1000)  @tab | @tab Ki @tab kibibyte (2^10 = 1024)
@item M @tab megabyte  (10^6)         @tab | @tab Mi @tab mebibyte (2^20)
@item G @tab gigabyte  (10^9)         @tab | @tab Gi @tab gibibyte (2^30)
@item T @tab terabyte  (10^12)        @tab | @tab Ti @tab tebibyte (2^40)
@item P @tab petabyte  (10^15)        @tab | @tab Pi @tab pebibyte (2^50)
@item E @tab exabyte   (10^18)        @tab | @tab Ei @tab exbibyte (2^60)
@item Z @tab zettabyte (10^21)        @tab | @tab Zi @tab zebibyte (2^70)
@item Y @tab yottabyte (10^24)        @tab | @tab Yi @tab yobibyte (2^80)
@end multitable

@sp 1
Exit status: 0 for a normal exit, 1 for environmental problems (file not
found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
invalid input file, 3 for an internal consistency error (eg, bug) which
caused plzip to panic.


@node File Format
@chapter File Format
@cindex file format

Perfection is reached, not when there is no longer anything to add, but
when there is no longer anything to take away.@*
--- Antoine de Saint-Exupery

@sp 1
In the diagram below, a box like this:
@verbatim
+---+
|   | <-- the vertical bars might be missing
+---+
@end verbatim

represents one byte; a box like this:
@verbatim
+==============+
|              |
+==============+
@end verbatim

represents a variable number of bytes.

@sp 1
A lzip file consists of a series of "members" (compressed data sets).
The members simply appear one after another in the file, with no
additional information before, between, or after them.

Each member has the following structure:
@verbatim
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID string | VN | DS | Lzma stream | CRC32 |   Data size   |  Member size  |
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
@end verbatim

All multibyte values are stored in little endian order.

@table @samp
@item ID string
A four byte string, identifying the lzip format, with the value "LZIP".

@item VN (version number, 1 byte)
Just in case something needs to be modified in the future. 1 for now.

@item DS (coded dictionary size, 1 byte)
Lzip divides the distance between any two powers of 2 into 8 equally
spaced intervals, named "wedges". The dictionary size is calculated by
taking a power of 2 (the base size) and substracting from it a number of
wedges between 0 and 7. The size of a wedge is (base_size / 16).@*
Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).@*
Bits 7-5 contain the number of wedges (0 to 7) to substract from the
base size to obtain the dictionary size.@*
Example: 0xD3 = (2^19 - 6 * 2^15) = (512KiB - 6 * 32KiB) = 320KiB@*
Valid values for dictionary size range from 4KiB to 512MiB.

@item Lzma stream
The lzma stream, finished by an end of stream marker. Uses default values
for encoder properties. See the lzip manual for a full description.

@item CRC32 (4 bytes)
CRC of the uncompressed original data.

@item Data size (8 bytes)
Size of the uncompressed original data.

@item Member size (8 bytes)
Total size of the member, including header and trailer. This field acts
as a distributed index, allows the verification of stream integrity, and
facilitates safe recovery of undamaged members from multi-member files.

@end table


@node Problems
@chapter Reporting Bugs
@cindex bugs
@cindex getting help

There are probably bugs in plzip. There are certainly errors and
omissions in this manual. If you report them, they will get fixed. If
you don't, no one will ever know about them and they will remain unfixed
for all eternity, if not longer.

If you find a bug in plzip, please send electronic mail to
@email{lzip-bug@@nongnu.org}. Include the version number, which you can
find by running @w{@samp{plzip --version}}.


@node Concept Index
@unnumbered Concept Index

@printindex cp

@bye