summaryrefslogtreecommitdiffstats
path: root/doc/tarlz.texi
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2022-09-24 01:57:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2022-09-24 01:57:58 +0000
commitd35175c9e68a3ad252bfa22d266b8311df99a718 (patch)
tree0ed6c60ad70805dbda31e05d43ee1b967c478938 /doc/tarlz.texi
parentReleasing debian version 0.22-4. (diff)
downloadtarlz-d35175c9e68a3ad252bfa22d266b8311df99a718.tar.xz
tarlz-d35175c9e68a3ad252bfa22d266b8311df99a718.zip
Merging upstream version 0.23.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'doc/tarlz.texi')
-rw-r--r--doc/tarlz.texi621
1 files changed, 366 insertions, 255 deletions
diff --git a/doc/tarlz.texi b/doc/tarlz.texi
index bfa6d9d..5bdd2af 100644
--- a/doc/tarlz.texi
+++ b/doc/tarlz.texi
@@ -6,10 +6,10 @@
@finalout
@c %**end of header
-@set UPDATED 5 January 2022
-@set VERSION 0.22
+@set UPDATED 23 September 2022
+@set VERSION 0.23
-@dircategory Data Compression
+@dircategory Archiving
@direntry
* Tarlz: (tarlz). Archiver with multimember lzip compression
@end direntry
@@ -96,9 +96,9 @@ The resulting multimember tar.lz archive can be decompressed in
parallel, multiplying the decompression speed.
@item
-New members can be appended to the archive (by removing the EOF
-member), and unwanted members can be deleted from the archive. Just
-like an uncompressed tar archive.
+New members can be appended to the archive (by removing the
+end-of-archive member), and unwanted members can be deleted from the
+archive. Just like an uncompressed tar archive.
@item
It is a safe POSIX-style backup format. In case of corruption, tarlz
@@ -111,7 +111,7 @@ lziprecover can be used to recover some of the damaged members.
@item
A multimember tar.lz archive is usually smaller than the corresponding
solidly compressed tar.gz archive, except when individually
-compressing files smaller than about 32 KiB.
+compressing files smaller than about @w{32 KiB}.
@end itemize
Tarlz protects the extended records with a Cyclic Redundancy Check (CRC) in
@@ -133,21 +133,28 @@ the format of the archive is compatible with tarlz.
The format for running tarlz is:
@example
-tarlz [@var{options}] [@var{files}]
+tarlz @var{operation} [@var{options}] [@var{files}]
@end example
@noindent
All operations except @samp{--concatenate} and @samp{--compress} operate on
whole trees if any @var{file} is a directory. All operations except
-@samp{--compress} overwrite output files without warning.
-
-On archive creation or appending tarlz archives the files specified, but
-removes from member names any leading and trailing slashes and any file name
-prefixes containing a @samp{..} component. On extraction, leading and
-trailing slashes are also removed from member names, and archive members
-containing a @samp{..} component in the file name are skipped. Tarlz detects
-when the archive being created or enlarged is among the files to be dumped,
-appended or concatenated, and skips it.
+@samp{--compress} overwrite output files without warning. If no archive is
+specified, tarlz tries to read it from standard input or write it to
+standard output. Tarlz refuses to read archive data from a terminal or write
+archive data to a terminal. Tarlz detects when the archive being created or
+enlarged is among the files to be archived, appended, or concatenated, and
+skips it.
+
+Tarlz does not use absolute file names nor file names above the current
+working directory (perhaps changed by option @samp{-C}). On archive creation
+or appending tarlz archives the files specified, but removes from member
+names any leading and trailing slashes and any file name prefixes containing
+a @samp{..} component. On extraction, leading and trailing slashes are also
+removed from member names, and archive members containing a @samp{..}
+component in the file name are skipped. Tarlz does not follow symbolic links
+during extraction; not even symbolic links replacing intermediate
+directories.
On extraction and listing, tarlz removes leading @samp{./} strings from
member names in the archive or given in the command line, so that
@@ -158,11 +165,7 @@ If several compression levels or @samp{--*solid} options are given, the last
setting is used. For example @w{@samp{-9 --solid --uncompressed -1}} is
equivalent to @w{@samp{-1 --solid}}.
-tarlz supports the following
-@uref{http://www.nongnu.org/arg-parser/manual/arg_parser_manual.html#Argument-syntax,,options}:
-@ifnothtml
-@xref{Argument syntax,,,arg_parser}.
-@end ifnothtml
+tarlz supports the following operations:
@table @code
@item --help
@@ -180,40 +183,22 @@ specified with the option @samp{-f}, the input archives are concatenated to
standard output. All the archives involved must be regular (seekable) files,
and must be either all compressed or all uncompressed. Compressed and
uncompressed archives can't be mixed. Compressed archives must be
-multimember lzip files with the two end-of-file blocks plus any zero padding
-contained in the last lzip member of each archive. The intermediate
-end-of-file blocks are removed as each new archive is concatenated. If the
-archive is uncompressed, tarlz parses and skips tar headers until it finds
-the end-of-file blocks. Exit with status 0 without modifying the archive if
+multimember lzip files with the two end-of-archive blocks plus any zero
+padding contained in the last lzip member of each archive. The intermediate
+end-of-archive blocks are removed as each new archive is concatenated. If
+the archive is uncompressed, tarlz parses tar headers until it finds the
+end-of-archive blocks. Exit with status 0 without modifying the archive if
no @var{files} have been specified.
-@anchor{--data-size}
-@item -B @var{bytes}
-@itemx --data-size=@var{bytes}
-Set target size of input data blocks for the option @samp{--bsolid}.
-@xref{--bsolid}. Valid values range from @w{8 KiB} to @w{1 GiB}. Default
-value is two times the dictionary size, except for option @samp{-0} where it
-defaults to @w{1 MiB}. @xref{Minimum archive sizes}.
+Concatenating archives containing files in common results in two or more tar
+members with the same name in the resulting archive, which may produce
+nondeterministic behavior during multi-threaded extraction.
+@xref{mt-extraction}.
@item -c
@itemx --create
Create a new archive from @var{files}.
-@item -C @var{dir}
-@itemx --directory=@var{dir}
-Change to directory @var{dir}. When creating or appending, the position of
-each @samp{-C} option in the command line is significant; it will change the
-current working directory for the following @var{files} until a new
-@samp{-C} option appears in the command line. When extracting or comparing,
-all the @samp{-C} options are executed in sequence before reading the
-archive. Listing ignores any @samp{-C} options specified. @var{dir} is
-relative to the then current working directory, perhaps changed by a
-previous @samp{-C} option.
-
-Note that a process can only have one current working directory (CWD).
-Therefore multi-threading can't be used to create an archive if a @samp{-C}
-option appears after a relative file name in the command line.
-
@item -d
@itemx --diff
Compare and report differences between archive and file system. For each tar
@@ -228,10 +213,6 @@ be used in combination with @samp{--diff} when absolute file names were used
on archive creation: @w{@samp{tarlz -C / -d}}. Alternatively, tarlz may be
run from the root directory to perform the comparison.
-@item --ignore-ids
-Make @samp{--diff} ignore differences in owner and group IDs. This option is
-useful when comparing an @samp{--anonymous} archive.
-
@item --delete
Delete files and directories from an archive in place. It currently can
delete only from uncompressed archives and from archives with files
@@ -249,12 +230,109 @@ To delete a directory without deleting the files under it, use
may be dangerous. A corrupt archive, a power cut, or an I/O error may cause
data loss.
-@item --exclude=@var{pattern}
-Exclude files matching a shell pattern like @samp{*.o}. A file is considered
-to match if any component of the file name matches. For example, @samp{*.o}
-matches @samp{foo.o}, @samp{foo.o/bar} and @samp{foo/bar.o}. If
-@var{pattern} contains a @samp{/}, it matches a corresponding @samp{/} in
-the file name. For example, @samp{foo/*.o} matches @samp{foo/bar.o}.
+@item -r
+@itemx --append
+Append files to the end of an archive. The archive must be a regular
+(seekable) file either compressed or uncompressed. Compressed members can't
+be appended to an uncompressed archive, nor vice versa. If the archive is
+compressed, it must be a multimember lzip file with the two end-of-archive
+blocks plus any zero padding contained in the last lzip member of the
+archive. It is possible to append files to an archive with a different
+compression granularity. Appending works as follows; first the
+end-of-archive blocks are removed, then the new members are appended, and
+finally two new end-of-archive blocks are appended to the archive. If the
+archive is uncompressed, tarlz parses and skips tar headers until it finds
+the end-of-archive blocks. Exit with status 0 without modifying the archive
+if no @var{files} have been specified.
+
+Appending files already present in the archive results in two or more tar
+members with the same name, which may produce nondeterministic behavior
+during multi-threaded extraction. @xref{mt-extraction}.
+
+@item -t
+@itemx --list
+List the contents of an archive. If @var{files} are given, list only the
+@var{files} given.
+
+@item -x
+@itemx --extract
+Extract files from an archive. If @var{files} are given, extract only the
+@var{files} given. Else extract all the files in the archive. To extract a
+directory without extracting the files under it, use
+@w{@samp{tarlz -xf foo --exclude='dir/*' dir}}. Tarlz removes files and
+empty directories unconditionally before extracting over them. Other than
+that, it will not make any special effort to extract a file over an
+incompatible type of file. For example, extracting a file over a non-empty
+directory will usually fail.
+
+@item -z
+@itemx --compress
+Compress existing POSIX tar archives aligning the lzip members to the tar
+members with choice of granularity (---bsolid by default, ---dsolid works
+like ---asolid). The input archives are kept unchanged. Existing compressed
+archives are not overwritten. A hyphen @samp{-} used as the name of an input
+archive reads from standard input and writes to standard output (unless the
+option @samp{--output} is used). Tarlz can be used as compressor for GNU tar
+using a command like @w{@samp{tar -c -Hustar foo | tarlz -z -o foo.tar.lz}}.
+Note that tarlz only works reliably on archives without global headers, or
+with global headers whose content can be ignored.
+
+The compression is reversible, including any garbage present after the
+end-of-archive blocks. Tarlz stops parsing after the first end-of-archive
+block is found, and then compresses the rest of the archive. Unless solid
+compression is requested, the end-of-archive blocks are compressed in a lzip
+member separated from the preceding members and from any non-zero garbage
+following the end-of-archive blocks. @samp{--compress} implies plzip
+argument style, not tar style. Each input archive is compressed to a file
+with the extension @samp{.lz} added unless the option @samp{--output} is
+used. When @samp{--output} is used, only one input archive can be specified.
+@samp{-f} can't be used with @samp{--compress}.
+
+@item --check-lib
+Compare the
+@uref{http://www.nongnu.org/lzip/manual/lzlib_manual.html#Library-version,,version of lzlib}
+used to compile tarlz with the version actually being used at run time and
+exit. Report any differences found. Exit with error status 1 if differences
+are found. A mismatch may indicate that lzlib is not correctly installed or
+that a different version of lzlib has been installed after compiling tarlz.
+Exit with error status 2 if LZ_API_VERSION and LZ_version_string don't
+match. @w{@samp{tarlz -v --check-lib}} shows the version of lzlib being used
+and the value of LZ_API_VERSION (if defined).
+@ifnothtml
+@xref{Library version,,,lzlib}.
+@end ifnothtml
+
+@end table
+
+tarlz supports the following
+@uref{http://www.nongnu.org/arg-parser/manual/arg_parser_manual.html#Argument-syntax,,options}:
+@ifnothtml
+@xref{Argument syntax,,,arg_parser}.
+@end ifnothtml
+
+@table @code
+@anchor{--data-size}
+@item -B @var{bytes}
+@itemx --data-size=@var{bytes}
+Set target size of input data blocks for the option @samp{--bsolid}.
+@xref{--bsolid}. Valid values range from @w{8 KiB} to @w{1 GiB}. Default
+value is two times the dictionary size, except for option @samp{-0} where it
+defaults to @w{1 MiB}. @xref{Minimum archive sizes}.
+
+@item -C @var{dir}
+@itemx --directory=@var{dir}
+Change to directory @var{dir}. When creating or appending, the position of
+each @samp{-C} option in the command line is significant; it will change the
+current working directory for the following @var{files} until a new
+@samp{-C} option appears in the command line. When extracting or comparing,
+all the @samp{-C} options are executed in sequence before reading the
+archive. Listing ignores any @samp{-C} options specified. @var{dir} is
+relative to the then current working directory, perhaps changed by a
+previous @samp{-C} option.
+
+Note that a process can only have one current working directory (CWD).
+Therefore multi-threading can't be used to create an archive if a @samp{-C}
+option appears after a relative file name in the command line.
@item -f @var{archive}
@itemx --file=@var{archive}
@@ -266,14 +344,6 @@ argument reads from standard input or writes to standard output.
Follow symbolic links during archive creation, appending or comparison.
Archive or compare the files they point to instead of the links themselves.
-@item --mtime=@var{date}
-When creating or appending, use @var{date} as the modification time for
-files added to the archive instead of their actual modification times. The
-value of @var{date} may be either @samp{@@} followed by the number of
-seconds since the epoch, or a date in format @w{@samp{YYYY-MM-DD HH:MM:SS}},
-or the name of an existing file starting with @samp{.} or @samp{/}. In the
-latter case, the modification time of that file is used.
-
@item -n @var{n}
@itemx --threads=@var{n}
Set the number of (de)compression threads, overriding the system's default.
@@ -305,64 +375,11 @@ permissions specified in the archive.
@itemx --quiet
Quiet operation. Suppress all messages.
-@item -r
-@itemx --append
-Append files to the end of an archive. The archive must be a regular
-(seekable) file either compressed or uncompressed. Compressed members can't
-be appended to an uncompressed archive, nor vice versa. If the archive is
-compressed, it must be a multimember lzip file with the two end-of-file
-blocks plus any zero padding contained in the last lzip member of the
-archive. It is possible to append files to an archive with a different
-compression granularity. Appending works as follows; first the end-of-file
-blocks are removed, then the new members are appended, and finally two new
-end-of-file blocks are appended to the archive. If the archive is
-uncompressed, tarlz parses and skips tar headers until it finds the
-end-of-file blocks. Exit with status 0 without modifying the archive if no
-@var{files} have been specified.
-
-@item -t
-@itemx --list
-List the contents of an archive. If @var{files} are given, list only the
-@var{files} given.
-
@item -v
@itemx --verbose
Verbosely list files processed. Further -v's (up to 4) increase the
verbosity level.
-@item -x
-@itemx --extract
-Extract files from an archive. If @var{files} are given, extract only the
-@var{files} given. Else extract all the files in the archive. To extract a
-directory without extracting the files under it, use
-@w{@samp{tarlz -xf foo --exclude='dir/*' dir}}. Tarlz will not make any
-special effort to extract a file over an incompatible type of file. For
-example, extracting a link over a directory will usually fail. (Principle of
-least surprise).
-
-@item -z
-@itemx --compress
-Compress existing POSIX tar archives aligning the lzip members to the tar
-members with choice of granularity (---bsolid by default, ---dsolid works
-like ---asolid). The input archives are kept unchanged. Existing compressed
-archives are not overwritten. A hyphen @samp{-} used as the name of an input
-archive reads from standard input and writes to standard output (unless the
-option @samp{--output} is used). Tarlz can be used as compressor for GNU tar
-using a command like @w{@samp{tar -c -Hustar foo | tarlz -z -o foo.tar.lz}}.
-Note that tarlz only works reliably on archives without global headers, or
-with global headers whose content can be ignored.
-
-The compression is reversible, including any garbage present after the EOF
-blocks. Tarlz stops parsing after the first EOF block is found, and then
-compresses the rest of the archive. Unless solid compression is requested,
-the EOF blocks are compressed in a lzip member separated from the preceding
-members and from any non-zero garbage following the EOF blocks.
-@samp{--compress} implies plzip argument style, not tar style. Each input
-archive is compressed to a file with the extension @samp{.lz} added unless
-the option @samp{--output} is used. When @samp{--output} is used, only one
-input archive can be specified. @samp{-f} can't be used with
-@samp{--compress}.
-
@item -0 .. -9
Set the compression level for @samp{--create}, @samp{--append}, and
@samp{--compress}. The default compression level is @samp{-6}. Like lzip,
@@ -392,7 +409,7 @@ appended to an uncompressed archive, nor vice versa.
@item --asolid
When creating or appending to a compressed archive, use appendable solid
compression. All the files being added to the archive are compressed into a
-single lzip member, but the end-of-file blocks are compressed into a
+single lzip member, but the end-of-archive blocks are compressed into a
separate lzip member. This creates a solidly compressed appendable archive.
Solid archives can't be created nor decoded in parallel.
@@ -405,58 +422,85 @@ compressed data block must contain an integer number of tar members. Block
compression is the default because it improves compression ratio for
archives with many files smaller than the block size. This option allows
tarlz revert to default behavior if, for example, it is invoked through an
-alias like @samp{tar='tarlz --solid'}. @xref{--data-size}, to set the target
-block size.
+alias like @w{@samp{tar='tarlz --solid'}}. @xref{--data-size}, to set the
+target block size.
@item --dsolid
When creating or appending to a compressed archive, compress each file
specified in the command line separately in its own lzip member, and use
solid compression for each directory specified in the command line. The
-end-of-file blocks are compressed into a separate lzip member. This creates
-a compressed appendable archive with a separate lzip member for each file or
-top-level directory specified.
+end-of-archive blocks are compressed into a separate lzip member. This
+creates a compressed appendable archive with a separate lzip member for each
+file or top-level directory specified.
@item --no-solid
When creating or appending to a compressed archive, compress each file
-separately in its own lzip member. The end-of-file blocks are compressed
+separately in its own lzip member. The end-of-archive blocks are compressed
into a separate lzip member. This creates a compressed appendable archive
with a lzip member for each file.
@item --solid
When creating or appending to a compressed archive, use solid compression.
-The files being added to the archive, along with the end-of-file blocks, are
-compressed into a single lzip member. The resulting archive is not
+The files being added to the archive, along with the end-of-archive blocks,
+are compressed into a single lzip member. The resulting archive is not
appendable. No more files can be later appended to the archive. Solid
archives can't be created nor decoded in parallel.
@item --anonymous
-Equivalent to @samp{--owner=root --group=root}.
+Equivalent to @w{@samp{--owner=root --group=root}}.
@item --owner=@var{owner}
-When creating or appending, use @var{owner} for files added to the
-archive. If @var{owner} is not a valid user name, it is decoded as a
-decimal numeric user ID.
+When creating or appending, use @var{owner} for files added to the archive.
+If @var{owner} is not a valid user name, it is decoded as a decimal numeric
+user ID.
@item --group=@var{group}
-When creating or appending, use @var{group} for files added to the
-archive. If @var{group} is not a valid group name, it is decoded as a
-decimal numeric group ID.
+When creating or appending, use @var{group} for files added to the archive.
+If @var{group} is not a valid group name, it is decoded as a decimal numeric
+group ID.
+
+@item --exclude=@var{pattern}
+Exclude files matching a shell pattern like @samp{*.o}. A file is considered
+to match if any component of the file name matches. For example, @samp{*.o}
+matches @samp{foo.o}, @samp{foo.o/bar} and @samp{foo/bar.o}. If
+@var{pattern} contains a @samp{/}, it matches a corresponding @samp{/} in
+the file name. For example, @samp{foo/*.o} matches @samp{foo/bar.o}.
+Multiple @samp{--exclude} options can be specified.
+
+@item --ignore-ids
+Make @samp{--diff} ignore differences in owner and group IDs. This option is
+useful when comparing an @samp{--anonymous} archive.
+
+@item --ignore-overflow
+Make @samp{--diff} ignore differences in mtime caused by overflow on 32-bit
+systems with a 32-bit time_t.
@item --keep-damaged
Don't delete partially extracted files. If a decompression error happens
while extracting a file, keep the partial data extracted. Use this option to
recover as much data as possible from each damaged member. It is recommended
-to run tarlz in single-threaded mode (--threads=0) when using this option.
+to run tarlz in single-threaded mode (---threads=0) when using this option.
@item --missing-crc
-Exit with error status 2 if the CRC of the extended records is missing.
-When this option is used, tarlz detects any corruption in the extended
-records (only limited by CRC collisions). But note that a corrupt
-@samp{GNU.crc32} keyword, for example @samp{GNU.crc33}, is reported as a
-missing CRC instead of as a corrupt record. This misleading
-@samp{Missing CRC} message is the consequence of a flaw in the POSIX pax
-format; i.e., the lack of a mandatory check sequence in the extended
-records. @xref{crc32}.
+Exit with error status 2 if the CRC of the extended records is missing. When
+this option is used, tarlz detects any corruption in the extended records
+(only limited by CRC collisions). But note that a corrupt @samp{GNU.crc32}
+keyword, for example @samp{GNU.crc33}, is reported as a missing CRC instead
+of as a corrupt record. This misleading @w{@samp{Missing CRC}} message is
+the consequence of a flaw in the POSIX pax format; i.e., the lack of a
+mandatory check sequence of the extended records. @xref{crc32}.
+
+@item --mtime=@var{date}
+When creating or appending, use @var{date} as the modification time for
+files added to the archive instead of their actual modification times. The
+value of @var{date} may be either @samp{@@} followed by the number of
+seconds since (or before) the epoch, or a date in format
+@w{@samp{[-]YYYY-MM-DD HH:MM:SS}} or @samp{[-]YYYY-MM-DDTHH:MM:SS}, or the
+name of an existing reference file starting with @samp{.} or @samp{/} whose
+modification time is used. The time of day @samp{HH:MM:SS} in the date
+format is optional and defaults to @samp{00:00:00}. The epoch is
+@w{@samp{1970-01-01 00:00:00 UTC}}. Negative seconds or years define a
+modification time before the epoch.
@item --out-slots=@var{n}
Number of @w{1 MiB} output packets buffered per worker thread during
@@ -465,20 +509,6 @@ number of packets may increase compression speed if the files being archived
are larger than @w{64 MiB} compressed, but requires more memory. Valid
values range from 1 to 1024. The default value is 64.
-@item --check-lib
-Compare the
-@uref{http://www.nongnu.org/lzip/manual/lzlib_manual.html#Library-version,,version of lzlib}
-used to compile tarlz with the version actually being used at run time and
-exit. Report any differences found. Exit with error status 1 if differences
-are found. A mismatch may indicate that lzlib is not correctly installed or
-that a different version of lzlib has been installed after compiling tarlz.
-Exit with error status 2 if LZ_API_VERSION and LZ_version_string don't
-match. @w{@samp{tarlz -v --check-lib}} shows the version of lzlib being used
-and the value of LZ_API_VERSION (if defined).
-@ifnothtml
-@xref{Library version,,,lzlib}.
-@end ifnothtml
-
@item --warn-newer
During archive creation, warn if any file being archived has a modification
time newer than the archive creation time. This option may slow archive
@@ -496,10 +526,10 @@ keyword appearing in the same block of extended records.
@end table
-Exit status: 0 for a normal exit, 1 for environmental problems (file not
-found, files differ, invalid flags, I/O errors, etc), 2 to indicate a
-corrupt or invalid input file, 3 for an internal consistency error (e.g. bug)
-which caused tarlz to panic.
+Exit status: 0 for a normal exit, 1 for environmental problems
+(file not found, files differ, invalid command line options, I/O errors,
+etc), 2 to indicate a corrupt or invalid input file, 3 for an internal
+consistency error (e.g., bug) which caused tarlz to panic.
@node Portable character set
@@ -518,13 +548,7 @@ The last three characters are the period, underscore, and hyphen-minus
characters, respectively.
File names are identifiers. Therefore, archiving works better when file
-names use only the portable character set without spaces added. Unicode is
-for human consumption. It should be
-@uref{http://www.gnu.org/software/moe/manual/moe_manual.html#why-not-Unicode,,avoided}
-in computing environments, specially in file names.
-@ifnothtml
-@xref{why not Unicode,,,moe}.
-@end ifnothtml
+names use only the portable character set without spaces added.
@node File format
@@ -552,29 +576,30 @@ bytes (for example 512).
@sp 1
A tar.lz file consists of a series of lzip members (compressed data sets).
-The members simply appear one after another in the file, with no
-additional information before, between, or after them.
+The members simply appear one after another in the file, with no additional
+information before, between, or after them.
-Each lzip member contains one or more tar members in a simplified POSIX
-pax interchange format. The only pax typeflag value supported by tarlz
-(in addition to the typeflag values defined by the ustar format) is
-@samp{x}. The pax format is an extension on top of the ustar format that
-removes the size limitations of the ustar format.
+Each lzip member contains one or more tar members in a simplified POSIX pax
+interchange format. The only pax typeflag value supported by tarlz (in
+addition to the typeflag values defined by the ustar format) is @samp{x}.
+The pax format is an extension on top of the ustar format that removes the
+size limitations of the ustar format.
Each tar member contains one file archived, and is represented by the
following sequence:
@itemize @bullet
@item
-An optional extended header block with extended header records. This
-header block is of the form described in pax header block, with a
-typeflag value of @samp{x}. The extended header records are included as
-the data for this header block.
+An optional extended header block followed by one or more blocks that
+contain the extended header records as if they were the contents of a file;
+i.e., the extended header records are included as the data for this header
+block. This header block is of the form described in pax header block, with
+a typeflag value of @samp{x}.
@item
-A header block in ustar format that describes the file. Any fields
-defined in the preceding optional extended header records override the
-associated fields in this header block for this file.
+A header block in ustar format that describes the file. Any fields defined
+in the preceding optional extended header records override the associated
+fields in this header block for this file.
@item
Zero or more blocks that contain the contents of the file.
@@ -586,9 +611,11 @@ is split over two or more lzip members, the archive must be decoded
sequentially. @xref{Multi-threaded decoding}.
At the end of the archive file there are two 512-byte blocks filled with
-binary zeros, interpreted as an end-of-archive indicator. These EOF
-blocks are either compressed in a separate lzip member or compressed
-along with the tar members contained in the last lzip member.
+binary zeros, interpreted as an end-of-archive indicator. These EOA blocks
+are either compressed in a separate lzip member or compressed along with the
+tar members contained in the last lzip member. For a compressed archive to
+be recognized by tarlz as appendable, the last lzip member must contain
+between 512 and 32256 zeros alone.
The diagram below shows the correspondence between each tar member (formed
by one or two headers plus optional data) in the tar archive and each
@@ -602,7 +629,7 @@ used:
@verbatim
tar
+========+======+=================+===============+========+======+========+
-| header | data | extended header | extended data | header | data | EOF |
+| header | data | extended header | extended data | header | data | EOA |
+========+======+=================+===============+========+======+========+
tar.lz
@@ -620,7 +647,7 @@ Similarly, if several records with the same keyword appear in the same
block of extended records, only the last record for the repeated keyword
takes effect. The other records for the repeated keyword are ignored.@*
A global header inserted between an extended header and an ustar header.@*
-An extended header just before the EOF blocks.
+An extended header just before the end-of-archive blocks.
@end ignore
@sp 1
@@ -635,7 +662,7 @@ archive extraction. @xref{flawed-compat}.
The pax extended header data consists of one or more records, each of
them constructed as follows:@*
-@samp{"%d %s=%s\n", <length>, <keyword>, <value>}
+@w{@samp{"%d %s=%s\n", <length>, <keyword>, <value>}}
The fields <length> and <keyword> in the record must be limited to the
portable character set (@pxref{Portable character set}). The field <length>
@@ -647,25 +674,53 @@ space, equal-sign, and newline.
These are the <keyword> values currently supported by tarlz:
@table @code
+@item atime
+The signed decimal representation of the access time of the following file
+in seconds since (or before) the epoch, obtained from the function
+@samp{stat}. The atime record is created only for files with a modification
+time outside of the ustar range. @xref{ustar-mtime}.
+
+@item gid
+The unsigned decimal representation of the group ID of the group that owns
+the following file. The gid record is created only for files with a group ID
+greater than 2_097_151 (octal 7777777). @xref{ustar-uid-gid}.
+
@item linkpath
-The pathname of a link being created to another file, of any type,
+The file name of a link being created to another file, of any type,
previously archived. This record overrides the field @samp{linkname} in the
-following ustar header block. The following ustar header block
-determines the type of link created. If typeflag of the following header
-block is 1, it will be a hard link. If typeflag is 2, it will be a
-symbolic link and the linkpath value will be used as the contents of the
-symbolic link.
+following ustar header block. The following ustar header block determines
+the type of link created. If typeflag of the following header block is 1, it
+will be a hard link. If typeflag is 2, it will be a symbolic link and the
+linkpath value will be used as the contents of the symbolic link. The
+linkpath record is created only for links with a link name that does not fit
+in the space provided by the ustar header.
+
+@item mtime
+The signed decimal representation of the modification time of the following
+file in seconds since (or before) the epoch, obtained from the function
+@samp{stat}. This record overrides the field @samp{mtime} in the following
+ustar header block. The mtime record is created only for files with a
+modification time outside of the ustar range. @xref{ustar-mtime}.
@item path
-The pathname of the following file. This record overrides the fields
-@samp{name} and @samp{prefix} in the following ustar header block.
+The file name of the following file. This record overrides the fields
+@samp{name} and @samp{prefix} in the following ustar header block. The path
+record is created for files with a name that does not fit in the space
+provided by the ustar header, but is also created for files that require any
+other extended record so that the fields @samp{name} and @samp{prefix} in
+the following ustar header block can be zeroed.
@item size
-The size of the file in bytes, expressed as a decimal number using
-digits from the ISO/IEC 646:1991 (ASCII) standard. This record overrides
-the size field in the following ustar header block. The size record is
-used only for files with a size value greater than 8_589_934_591
-@w{(octal 77777777777)}. This is 2^33 bytes or larger.
+The size of the file in bytes, expressed as a decimal number using digits
+from the ISO/IEC 646:1991 (ASCII) standard. This record overrides the field
+@samp{size} in the following ustar header block. The size record is created
+only for files with a size value greater than 8_589_934_591
+@w{(octal 77777777777)}; that is, @w{8 GiB} (2^33 bytes) or larger.
+
+@item uid
+The unsigned decimal representation of the user ID of the file owner of the
+following file. The uid record is created only for files with a user ID
+greater than 2_097_151 (octal 7777777). @xref{ustar-uid-gid}.
@anchor{key_crc32}
@item GNU.crc32
@@ -722,18 +777,18 @@ The fields @samp{name}, @samp{linkname}, and @samp{prefix} are
null-terminated character strings except when all characters in the array
contain non-null characters including the last character.
-The fields @samp{prefix} and @samp{name} produce the pathname of the file. A
-new pathname is formed, if prefix is not an empty string (its first
-character is not null), by concatenating prefix (up to the first null
-character), a slash character, and name; otherwise, name is used alone. In
-either case, name is terminated at the first null character. If prefix
-begins with a null character, it is ignored. In this manner, pathnames of at
-most 256 characters can be supported. If a pathname does not fit in the
-space provided, an extended record is used to store the pathname.
+The fields @samp{name} and @samp{prefix} produce the file name. A new file
+name is formed, if prefix is not an empty string (its first character is not
+null), by concatenating prefix (up to the first null character), a slash
+character, and name; otherwise, name is used alone. In either case, name is
+terminated at the first null character. If prefix begins with a null
+character, it is ignored. In this manner, file names of at most 256
+characters can be supported. If a file name does not fit in the space
+provided, an extended record is used to store the file name.
-The field @samp{linkname} does not use the prefix to produce a pathname. If
-the linkname does not fit in the 100 characters provided, an extended record
-is used to store the linkname.
+The field @samp{linkname} does not use the prefix to produce a file name. If
+the link name does not fit in the 100 characters provided, an extended
+record is used to store the link name.
The field @samp{mode} provides 12 access permission bits. The following
table shows the symbolic name of each bit and its octal value:
@@ -746,8 +801,10 @@ table shows the symbolic name of each bit and its octal value:
@item S_IROTH @tab 00004 @tab S_IWOTH @tab 00002 @tab S_IXOTH @tab 00001
@end multitable
+@anchor{ustar-uid-gid}
The fields @samp{uid} and @samp{gid} are the user and group IDs of the owner
-and group of the file, respectively.
+and group of the file, respectively. If the file uid or gid are greater than
+2_097_151 (octal 7777777), an extended record is used to store the uid or gid.
The field @samp{size} contains the octal representation of the size of the
file in bytes. If the field @samp{typeflag} specifies a file of type '0'
@@ -758,9 +815,13 @@ to 0 or ignores it, and does not store or expect any logical records
following the header. If the file size is larger than 8_589_934_591 bytes
@w{(octal 77777777777)}, an extended record is used to store the file size.
+@anchor{ustar-mtime}
The field @samp{mtime} contains the octal representation of the modification
time of the file at the time it was archived, obtained from the function
-@samp{stat}.
+@samp{stat}. If the modification time is negative or larger than
+8_589_934_591 @w{(octal 77777777777)} seconds since the epoch, an extended
+record is used to store the modification time. The ustar range of mtime goes
+from @w{@samp{1970-01-01 00:00:00 UTC}} to @w{@samp{2242-03-16 12:56:31 UTC}}.
The field @samp{chksum} contains the octal representation of the value of
the simple sum of all bytes in the header logical record. Each byte in the
@@ -775,7 +836,8 @@ file archived:
Regular file.
@item '1'
-Hard link to another file, of any type, previously archived.
+Hard link to another file, of any type, previously archived. Hard links must
+not contain file data.
@item '2'
Symbolic link.
@@ -792,9 +854,9 @@ Directory.
FIFO special file.
@item '7'
-Reserved to represent a file to which an implementation has associated
-some high-performance attribute. Tarlz treats this type of file as a
-regular file (type 0).
+Reserved to represent a file to which an implementation has associated some
+high-performance attribute (contiguous file). Tarlz treats this type of file
+as a regular file (type 0).
@end table
@@ -817,9 +879,9 @@ Tarlz creates safe archives that allow the reliable detection of invalid or
corrupt metadata during decoding even when the integrity checking of lzip
can't be used because the lzip members are only decompressed partially, as
it happens in parallel @samp{--diff}, @samp{--list}, and @samp{--extract}.
-In order to achieve this goal, tarlz makes some changes to the variant of
-the pax format that it uses. This chapter describes these changes and the
-concrete reasons to implement them.
+In order to achieve this goal and avoid some other flaws in the pax format,
+tarlz makes some changes to the variant of the pax format that it uses. This
+chapter describes these changes and the concrete reasons to implement them.
@sp 1
@anchor{crc32}
@@ -857,23 +919,28 @@ to the POSIX-2:1993 standard, POSIX.1-2008 recommends selecting extended
header field values that allow such tar to create a regular file containing
the extended header records as data. This approach is broken because if the
extended header is needed because of a long file name, the fields
-@samp{prefix} and @samp{name} will be unable to contain the full pathname of
-the file. Therefore the files corresponding to both the extended header and
-the overridden ustar header will be extracted using truncated file names,
-perhaps overwriting existing files or directories. It may be a security risk
-to extract a file with a truncated file name.
+@samp{name} and @samp{prefix} will be unable to contain the full file name.
+(Some tar implementations store the truncated name in the field @samp{name}
+alone, truncating the name to only 100 bytes instead of 256). Therefore the
+files corresponding to both the extended header and the overridden ustar
+header will be extracted using truncated file names, perhaps overwriting
+existing files or directories. It may be a security risk to extract a file
+with a truncated file name.
To avoid this problem, tarlz writes extended headers with all fields zeroed
-except size, chksum, typeflag, magic and version. This prevents old tar
-programs from extracting the extended records as a file in the wrong place.
-Tarlz also sets to zero those fields of the ustar header overridden by
-extended records. Finally, tarlz skips members without name when decoding
-except when listing. This is needed to detect certain format violations
-during parallel extraction.
-
-If an extended header is required for any reason (for example a file size
-larger than @w{8 GiB} or a link name longer than 100 bytes), tarlz moves the
-file name also to the extended header to prevent an ustar tool from trying
+except @samp{size} (which contains the size of the extended records),
+@samp{chksum}, @samp{typeflag}, @samp{magic}, and @samp{version}. In
+particular, tarlz sets the fields @samp{name} and @samp{prefix} to zero.
+This prevents old tar programs from extracting the extended records as a
+file in the wrong place. Tarlz also sets to zero those fields of the ustar
+header overridden by extended records. Finally, tarlz skips members with
+zeroed @samp{name} and @samp{prefix} when decoding, except when listing.
+This is needed to detect certain format violations during parallel
+extraction.
+
+If an extended header is required for any reason (for example a file size of
+@w{8 GiB} or larger, or a link name longer than 100 bytes), tarlz also moves
+the file name to the extended records to prevent an ustar tool from trying
to extract the file or link. This also makes easier during parallel decoding
the detection of a tar member split between two lzip members at the boundary
between the extended header and the ustar header.
@@ -882,17 +949,39 @@ between the extended header and the ustar header.
@section As simple as possible (but not simpler)
The tarlz format is mainly ustar. Extended pax headers are used only when
-needed because the length of a file name or link name, or the size of a file
-exceed the limits of the ustar format. Adding @w{1 KiB} of extended headers
-to each member just to record subsecond timestamps seems wasteful for a
-backup format. Moreover, minimizing the overhead may help recovering the
-archive with lziprecover in case of corruption.
+needed because the length of a file name or link name, or the size or other
+attribute of a file exceed the limits of the ustar format. Adding @w{1 KiB}
+of extended header and records to each member just to save subsecond
+timestamps seems wasteful for a backup format. Moreover, minimizing the
+overhead may help recovering the archive with lziprecover in case of
+corruption.
Global pax headers are tolerated, but not supported; they are parsed and
ignored. Some operations may not behave as expected if the archive contains
global headers.
@sp 1
+@section Improve reproducibility
+
+Pax includes by default the process ID of the pax process in the ustar name
+of the extended headers, making the archive not reproducible. Tarlz stores
+the true name of the file just once, either in the ustar header or in the
+extended records, making it easier to produce reproducible archives.
+
+Pax allows an extended record to have length x-1 or x if x is a power of
+ten; @samp{99<97_bytes>} or @samp{100<97_bytes>}. Tarlz minimizes the length
+of the record and always produces a length of x-1 in these cases.
+
+@sp 1
+@section No data in hard links
+
+Tarlz does not allow data in hard link members. The data (if any) must be in
+the member determining the type of the file (which can't be a link). If all
+the names of a file are stored as hard links, the type of the file is lost.
+Not allowing data in hard links also prevents invalid actions like
+extracting file data for a hard link to a symbolic link or to a directory.
+
+@sp 1
@section Avoid misconversions to/from UTF-8
There is no portable way to tell what charset a text string is coded into.
@@ -1047,17 +1136,18 @@ corresponding to the tar member header. This is another reason why the tar
headers must provide their own integrity checking.
@sp 1
+@anchor{mt-extraction}
@section Limitations of multi-threaded extraction
Multi-threaded extraction may produce different output than single-threaded
extraction in some cases:
-During multi-threaded extraction, several independent processes are
-simultaneously reading the archive and creating files in the file system. The
-archive is not read sequentially. As a consequence, any error or weirdness
-in the archive (like a corrupt member or an EOF block in the middle of the
-archive) won't be usually detected until part of the archive beyond that
-point has been processed.
+During multi-threaded extraction, several independent threads are
+simultaneously reading the archive and creating files in the file system.
+The archive is not read sequentially. As a consequence, any error or
+weirdness in the archive (like a corrupt member or an end-of-archive block
+in the middle of the archive) won't be usually detected until part of the
+archive beyond that point has been processed.
If the archive contains two or more tar members with the same name,
single-threaded extraction extracts the members in the order they appear in
@@ -1070,6 +1160,9 @@ If the same file is extracted through several paths (different member names
resolve to the same file in the file system), the result is undefined.
(Probably the resulting file will be mangled).
+Extraction of a hard link may fail if it is extracted before the file it
+links to.
+
@node Minimum archive sizes
@chapter Minimum archive sizes required for multi-threaded block compression
@@ -1123,8 +1216,8 @@ tarlz -cf archive.tar.lz a b c
@sp 1
@noindent
-Example 2: Append files @samp{d} and @samp{e} to the multimember
-compressed archive @samp{archive.tar.lz}.
+Example 2: Append files @samp{d} and @samp{e} to the multimember compressed
+archive @samp{archive.tar.lz}.
@example
tarlz -rf archive.tar.lz d e
@@ -1148,7 +1241,7 @@ Example 4: Create a compressed appendable archive containing directories
directory. Then append files @samp{a}, @samp{b}, @samp{c}, @samp{d} and
@samp{e} to the archive, all of them contained in a single lzip member.
The resulting archive @samp{archive.tar.lz} contains 5 lzip members
-(including the EOF member).
+(including the end-of-archive member).
@example
tarlz --dsolid -cf archive.tar.lz dir1 dir2 dir3
@@ -1184,11 +1277,11 @@ tarlz -xf archive.tar.lz a c dir1
@sp 1
@noindent
-Example 8: Copy the contents of directory @samp{sourcedir} to the
-directory @samp{destdir}.
+Example 8: Copy the contents of directory @samp{sourcedir} to the directory
+@samp{destdir}.
@example
-tarlz -C sourcedir -c . | tarlz -C destdir -x
+tarlz -C sourcedir --uncompressed -cf - . | tarlz -C destdir -xf -
@end example
@sp 1
@@ -1202,6 +1295,24 @@ the other members can still be extracted).
tarlz -z --no-solid archive.tar
@end example
+@sp 1
+@noindent
+Example 10: Compress the archive @samp{archive.tar} and write the output to
+@samp{foo.tar.lz}.
+
+@example
+tarlz -z -o foo.tar.lz archive.tar
+@end example
+
+@sp 1
+@noindent
+Example 11: Concatenate and compress two archives @samp{archive1.tar} and
+@samp{archive2.tar}, and write the output to @samp{foo.tar.lz}.
+
+@example
+tarlz -A archive1.tar archive2.tar | tarlz -z -o foo.tar.lz
+@end example
+
@node Problems
@chapter Reporting bugs